VISM-XGCP-EXTENSION-MIB: View SNMP OID List / Download MIB

VENDOR: STRATACOM


 Home MIB: VISM-XGCP-EXTENSION-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 vismXgcpExtensionGrp 1.3.6.1.4.1.351.110.5.5.5
     vismXgcpCoreObjects 1.3.6.1.4.1.351.110.5.5.5.1
         vismXgcpRequestMaxTimeout 1.3.6.1.4.1.351.110.5.5.5.1.1 integer read-write
This object specifies the maximum timeout value. This timer value is used along with xgcpRequestTimeout and xgcpRequestRetries (in xgcpGrp.my) to determine the exponential retry interval for retransmitting unacknowledged xgcp messages. The value of this timer has to be greater than or equal to xgcpRequestTimeout. The default value of this object is 500 milliseconds. When the value of this object changes vismXgcpCoreObjects changed trap will be sent.
         vismXgcpPort 1.3.6.1.4.1.351.110.5.5.5.1.2 integer read-write
This object is used to configure the local UDP port on VISM used by the SGCP and MGCP protocols to communicate with the call agent. The UDP port is used together with vismIpAddress to identify the local end of a SGCP/MGCP connection. The default value of this object is 2427. In VISM 1.5 this object always defaults to 2427 and is read-only.
         vismXgcpPeerTable 1.3.6.1.4.1.351.110.5.5.5.1.3 no-access
This table is used to provision peer-specific XGCP configuration information. Each table entry corresponds to an XGCP peer name / peer XGCP variant combination.
             vismXgcpPeerEntry 1.3.6.1.4.1.351.110.5.5.5.1.3.1 no-access
Each row is identified by XGCP peer name and peer XGCP protocol number combination. This means, if an MGC uses more than one variant of XGCP (i.e MGCP, SGCP 1.0, SGCP 1.1 etc), an entry will be maintained for each of the protocols. mgcNumber and mgcProtocolNumber from MGMIB are used as foreign index to this table. Entries in this table are implicitly created by the agent. An entry shall be created when an entry is created in the mgcProtocolTable and when mgcProtocolNumber refers to an XGCP variant (i.e MGCP, SGCP 1.0, SGCP 1.1 etc) as supported protocol. An entry shall be deleted if the corresponding entry in the mgcProtocolTable is deleted. As both mgcProtocolTable and vismXgcpPeerTable have mgcNumber and mgcProtocolNumber as index, referential integrity between the two tables is automatically ensured.
                 vismXgcpPeerNumber 1.3.6.1.4.1.351.110.5.5.5.1.3.1.1 integer read-only
The value of this object is the same as mgcNumber from MGMIB.
                 vismXgcpPeerProtocolNumber 1.3.6.1.4.1.351.110.5.5.5.1.3.1.2 integer read-only
The value of this object is the same as mgcProtocolNumber from MGMIB.
                 vismXgcpPeerPort 1.3.6.1.4.1.351.110.5.5.5.1.3.1.3 integer read-write
This object is used to configure the local UDP port on VISM used by the SGCP and MGCP protocols to communicate with the call agent. The UDP port is used together with vismIpAddress to identify the local end of a SGCP/MGCP connection. If the protocol configured for the call agent is MGCP 1.0, the default port is 2727. In all other cases, the default value of this object is 2427. In VISM 1.5 this object always defaults to 2427 and is read-only.
         vismXgcpMsgStatTable 1.3.6.1.4.1.351.110.5.5.5.1.4 no-access
This table is an extension to the xgcpMsgStatTable contained in the XGCP MIB. This table provides per-message type based detailed statistics information.
             vismXgcpMsgStatEntry 1.3.6.1.4.1.351.110.5.5.5.1.4.1 no-access
The row of the vismXgcpMsgStatTable contains additional information about XGCP message statistics beyond that provided by the XGCP MIB.
                 vismXgcpIpAddress 1.3.6.1.4.1.351.110.5.5.5.1.4.1.1 ipaddress read-only
This object specifies the IP address of the Media Gateway Controller. The value of this object is the same as xgcpIpAddress of XGCP-MIB.
                 vismXgcpCrcxCnts 1.3.6.1.4.1.351.110.5.5.5.1.4.1.2 counter read-only
This refers to the count of CRCX (Create Connection) messages received from the call agent since reset.
                 vismXgcpCrcxFailCnts 1.3.6.1.4.1.351.110.5.5.5.1.4.1.3 counter read-only
This refers to the count of CRCX (Create Connection) messages received from the call agent that were responded to with a failure return code.
                 vismXgcpMdcxCnts 1.3.6.1.4.1.351.110.5.5.5.1.4.1.4 counter read-only
This refers to the count of MDCX (Modify Connection) messages received from the call agent since reset.
                 vismXgcpMdcxFailCnts 1.3.6.1.4.1.351.110.5.5.5.1.4.1.5 counter read-only
This refers to the count of MDCX (Modify Connection) messages received from the call agent that were responded to with a failure return code.
                 vismXgcpDlcxRcvCnts 1.3.6.1.4.1.351.110.5.5.5.1.4.1.6 counter read-only
This refers to the count of DLCX (Delete Connection) messages received from the call agent since reset.
                 vismXgcpDlcxRcvFailCnts 1.3.6.1.4.1.351.110.5.5.5.1.4.1.7 counter read-only
This refers to the count of DLCX (Delete Connection) messages received from the call agent that were responded to with a failure return code.
                 vismXgcpDlcxSentCnts 1.3.6.1.4.1.351.110.5.5.5.1.4.1.8 counter read-only
This refers to the count of DLCX (Delete Connection) messages sent to the call agent since reset.
                 vismXgcpDlcxSentFailCnts 1.3.6.1.4.1.351.110.5.5.5.1.4.1.9 counter read-only
This refers to the count of DLCX (Delete Connection) messages sent to the call agent for which a response with failure return code was received or which timed out waiting for an acknowledgement.
                 vismXgcpRqntCnts 1.3.6.1.4.1.351.110.5.5.5.1.4.1.10 counter read-only
This refers to the count of RQNT (Request Notify) messages received from the call agent since reset.
                 vismXgcpRqntFailCnts 1.3.6.1.4.1.351.110.5.5.5.1.4.1.11 counter read-only
This refers to the count of RQNT (Request Notify) messages received from the call agent that were responded to with a failure return code.
                 vismXgcpNtfyCnts 1.3.6.1.4.1.351.110.5.5.5.1.4.1.12 counter read-only
This refers to the count of NTFY (Notify) messages sent to the call agent since reset.
                 vismXgcpNtfyFailCnts 1.3.6.1.4.1.351.110.5.5.5.1.4.1.13 counter read-only
This refers to the count of NTFY (Notify) messages sent to the call agent for which a response with failure return code was received or which timed out waiting for a response.
                 vismXgcpAuepCnts 1.3.6.1.4.1.351.110.5.5.5.1.4.1.14 counter read-only
This refers to the count of AUEP (Audit Endpoint) messages received from the call agent since reset.
                 vismXgcpAuepFailCnts 1.3.6.1.4.1.351.110.5.5.5.1.4.1.15 counter read-only
This refers to the count of AUEP (Audit Endpoint) messages received from the call agent that were responded to with a failure return code.
                 vismXgcpAucxCnts 1.3.6.1.4.1.351.110.5.5.5.1.4.1.16 counter read-only
This refers to the count of AUCX (Audit Connection) messages received from the call agent since reset.
                 vismXgcpAucxFailCnts 1.3.6.1.4.1.351.110.5.5.5.1.4.1.17 counter read-only
This refers to the count of AUCX (Audit Connection) messages received from the call agent that were responded to with a failure return code.
                 vismXgcpRsipCnts 1.3.6.1.4.1.351.110.5.5.5.1.4.1.18 counter read-only
This refers to the count of RSIP (Restart In Progress) messages sent to the call agent since reset.
                 vismXgcpRsipFailCnts 1.3.6.1.4.1.351.110.5.5.5.1.4.1.19 counter read-only
This refers to the count of RSIP (Restart In Progress) messages sent to the call agent for which a response with failure return code was received or which timed out waiting for a response.
     vismXgcpEnhancementsObjects 1.3.6.1.4.1.351.110.5.5.5.2
         vismXgcpRestartInProgressTdinit 1.3.6.1.4.1.351.110.5.5.5.2.1 integer read-write
The endpoint becomes disconnected when it tries to communicate with the call agent and the retransmission procedure times out after retrying. The endpoint in disconnected state starts the disconnected timer initialised to the random value and uniformly distributed between 1 and initial waiting delay (Tdinit) in seconds. The gateway waits for either the end of this timer, or the reception of call agent command or the detection of local user activity for the endpoint. When the disconnected timer elapses, or when a command is received from the call agent or when there is a local user activity, the Media Gateway sends the Restart In Progress command with the restart method as RM:disconnected to the Media Gateway Controller. The initial waiting delay (Tdinit) timeout value is defined by this MIB object. The recommended value of this object is 15 seconds.
         vismXgcpRestartInProgressTdmin 1.3.6.1.4.1.351.110.5.5.5.2.2 integer read-write
The endpoint becomes disconnected when it tries to communicate with the call agent and the retransmission procedure times out after retrying. The endpoint in disconnected state starts the disconnected timer initialised to the random value and uniformly distributed between 1 and initial waiting delay (Tdinit) in seconds. The gateway waits for either the end of this timer, or the reception of call agent command or the detection of local user activity for the endpoint. When the disconnected timer elapses, or when a command is received from the call agent or when there is a local user activity, the Media Gateway sends the Restart In Progress command with the restart method as RM:disconnected to the Media Gateway Controller. In case of local user activity, a provisionable disconnected minimum waiting delay (Tdmin) must have been elapsed since the gateway became disconnected. The minimum waiting delay (Tdmin) timeout value used by the Media Gateway to send the Restart In Progress with the restart method as RM:disconnected to the Media Gateway Controller if there is any local user activity is defined by this object. Media Gateway initiated delete connection (DLCX) or restart in progress (RSIP) commands are not considered as local user activity. The events observed on the TDM interface or on the network constitute the local user activity. The recommended value of this object is 15 seconds.
         vismXgcpRestartInProgressTdmax 1.3.6.1.4.1.351.110.5.5.5.2.3 integer read-write
The maximum waiting delay (Tdmax) timeout value used by the Media Gateway to send the Restart In Progress with the restart method as RM:disconnected to the Media Gateway Controller when the endpoint has become disconnected is defined by this object. The endpoint becomes disconnected when it tries to communicate with the call agent and the retransmission procedure times out after retrying. The endpoint in disconnected state starts the disconnected timer initialised to the random value and uniformly distributed between 1 and initial waiting delay (Tdinit) in seconds. The gateway waits for either the end of this timer, or the reception of call agent command or the detection of local user activity for the endpoint. When the disconnected timer elapses, or when a command is received from the call agent or when there is a local user activity, the Media Gateway sends the Restart In Progress command with the restart method as RM:disconnected to the Media Gateway Controller. If the disconnected procedure still left the endpoint disconnected, the disconnected timer is doubled subject to a provisionable disconnected maximum waiting delay (Tdmax) in seconds and the gateway starts the new disconnected procedure again. Once the maximum value is reached, the subsequent disconnected Restart In Progress commands use the maximum waiting delay (Tdmax). The recommended value of this object is 600 seconds.