VIDEOFRAME-SIGMON-VM0002-MIB: View SNMP OID List / Download MIB

VENDOR: VIDEOFRAME SYSTEMS


 Home MIB: VIDEOFRAME-SIGMON-VM0002-MIB
Download as:   
SNMPv2-CONF, VIDEOFRAME-REGISTRATIONS-MIB, SNMPv2-SMI, VIDEOFRAME-GENERIC-MIB, SNMPv2-TC, VIDEOFRAME-SIGMON-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
     vm0002AnalogVideo 1.3.6.1.4.1.4596.4.2.1.2
         vm0002Table 1.3.6.1.4.1.4596.4.2.1.2.1 no-access
Each row contains information about one VM0002 Analog Video module in the managed VF200 frame.
             vm0002Entry 1.3.6.1.4.1.4596.4.2.1.2.1.1 no-access
An Analog Video module entry.
                 vm0002SlotNumber 1.3.6.1.4.1.4596.4.2.1.2.1.1.1 integer read-only
The slot that this entry represents.
                 vm0002Active 1.3.6.1.4.1.4596.4.2.1.2.1.1.2 integer read-only
Indicates whether this entry is active (this module is in this slot). Enumeration: 'active': 1, 'inactive': 2.
                 vm0002FirmwareRev 1.3.6.1.4.1.4596.4.2.1.2.1.1.3 displaystring read-only
The revision level of the firmware on this module.
                 vm0002Locate 1.3.6.1.4.1.4596.4.2.1.2.1.1.4 integer read-write
Controls the locate indicator on the module and indicates its current state. Set to flash (1) to cause the locate LED on the front of the module to begin flashing. Set to off to stop flashing. Enumeration: 'flash': 1, 'off': 2.
         vm0002SignalTable 1.3.6.1.4.1.4596.4.2.1.2.2 no-access
Each row contains information about one channel of one VM0002 Analog Video module in the managed VF200 frame.
             vm0002SignalEntry 1.3.6.1.4.1.4596.4.2.1.2.2.1 no-access
An Analog Video module channel entry.
                 vm0002SignalSlotNumber 1.3.6.1.4.1.4596.4.2.1.2.2.1.1 integer read-only
The frame slot number that this entry represents.
                 vm0002SignalNumber 1.3.6.1.4.1.4596.4.2.1.2.2.1.2 integer read-only
The channel within the module to which this signal is connected.
                 vm0002SignalName 1.3.6.1.4.1.4596.4.2.1.2.2.1.3 displaystring read-write
The name of the signal connected to this channel.
                 vm0002SignalDescription 1.3.6.1.4.1.4596.4.2.1.2.2.1.4 displaystring read-write
Descriptive identification of the signal connected to this channel.
                 vm0002VSyncLossThreshold 1.3.6.1.4.1.4596.4.2.1.2.2.1.5 integer read-write
Number of frames with VSync errors to tolerate within the VSyncLossPeriod before alarming for this channel.
                 vm0002VSyncLossPeriod 1.3.6.1.4.1.4596.4.2.1.2.2.1.6 integer read-write
The period, in milliseconds, over which vertical sync errors are accumulated for this channel.
                 vm0002VSyncLossAlarmState 1.3.6.1.4.1.4596.4.2.1.2.2.1.7 integer read-only
The current state of the vertical sync loss alarm for this channel. Enumeration: 'ready': 1, 'triggered': 2.
                 vm0002VSyncLossAlarmAck 1.3.6.1.4.1.4596.4.2.1.2.2.1.8 integer read-write
Set to acknowledge (3) to acknowledge a triggered vertical sync loss alarm for this channel. Enumeration: 'idle': 1, 'acknowledge': 3, 'unacknowledged': 2.
                 vm0002VSyncLossTrapEnable 1.3.6.1.4.1.4596.4.2.1.2.2.1.9 integer read-write
Set to enabled (1) to enable the vertical sync loss alarm trap for this channel. Enumeration: 'disabled': 2, 'enabled': 1.
                 vm0002HSyncLossThreshold 1.3.6.1.4.1.4596.4.2.1.2.2.1.10 integer read-write
Number of frames with horizontal sync errors to tolerate within the HSyncLossPeriod before alarming for this channel.
                 vm0002HSyncLossPeriod 1.3.6.1.4.1.4596.4.2.1.2.2.1.11 integer read-write
The period, in milliseconds, over which horizontal sync loss errors are accumulated for this channel.
                 vm0002HSyncLossAlarmState 1.3.6.1.4.1.4596.4.2.1.2.2.1.12 integer read-only
The current state of the horizontal sync loss alarm for this channel. Enumeration: 'ready': 1, 'triggered': 2.
                 vm0002HSyncLossAlarmAck 1.3.6.1.4.1.4596.4.2.1.2.2.1.13 integer read-write
Set to acknowledge (3) to acknowledge a triggered horizontal sync loss alarm for this channel. Enumeration: 'idle': 1, 'acknowledge': 3, 'unacknowledged': 2.
                 vm0002HSyncLossTrapEnable 1.3.6.1.4.1.4596.4.2.1.2.2.1.14 integer read-write
Set to enabled (1) to enable the horizontal sync loss alarm trap for this channel. Enumeration: 'disabled': 2, 'enabled': 1.
                 vm0002PedestalHighThreshold 1.3.6.1.4.1.4596.4.2.1.2.2.1.15 integer read-write
Pedestal level above which to alarm for this channel, in units of 1/10th IRE.
                 vm0002PedestalHighPeriod 1.3.6.1.4.1.4596.4.2.1.2.2.1.16 integer read-write
The period, in milliseconds, that the pedestal must remain above the threshold to alarm for this channel.
                 vm0002MeasuredPedestal 1.3.6.1.4.1.4596.4.2.1.2.2.1.17 integer read-write
The current measured pedestal level on this channel, in units of 1/10th IRE.
                 vm0002PedestalHighAlarmState 1.3.6.1.4.1.4596.4.2.1.2.2.1.18 integer read-only
The current state of the pedestal high alarm for this channel. Enumeration: 'ready': 1, 'triggered': 2.
                 vm0002PedestalHighAlarmAck 1.3.6.1.4.1.4596.4.2.1.2.2.1.19 integer read-write
Set to acknowledge (3) to acknowledge a triggered pedestal high alarm for this channel. Enumeration: 'idle': 1, 'acknowledge': 3, 'unacknowledged': 2.
                 vm0002PedestalHighTrapEnable 1.3.6.1.4.1.4596.4.2.1.2.2.1.20 integer read-write
Set to enabled (1) to enable the pedestal high alarm trap for this channel. Enumeration: 'disabled': 2, 'enabled': 1.
                 vm0002CurrentAplRaw 1.3.6.1.4.1.4596.4.2.1.2.2.1.21 integer read-only
The current average luminance value on this channel, as a raw 10-bit sample value.
                 vm0002n100IRECalibrationSet 1.3.6.1.4.1.4596.4.2.1.2.2.1.22 integer read-write
Set to 'go' (2) to set the value of the 100 IRE channel calibration to the current average luminance value on this channel. Enumeration: 'ready': 1, 'go': 2, 'notReady': 3.
                 vm0002n100IRECalibrationValue 1.3.6.1.4.1.4596.4.2.1.2.2.1.23 integer read-only
The current raw luminance value used as the 100 IRE reference on this channel.
                 vm0002AplHighThreshold 1.3.6.1.4.1.4596.4.2.1.2.2.1.24 integer read-write
The high APL alarm threshold for this channel, in IRE.
                 vm0002AplHighDuration 1.3.6.1.4.1.4596.4.2.1.2.2.1.25 integer read-write
The high APL duration, in milliseconds, at which to alarm, for this channel.
                 vm0002AplHighAlarmState 1.3.6.1.4.1.4596.4.2.1.2.2.1.26 integer read-only
The current state of the high APL alarm for this channel. Enumeration: 'ready': 1, 'triggered': 2.
                 vm0002AplHighAlarmAck 1.3.6.1.4.1.4596.4.2.1.2.2.1.27 integer read-write
Set to acknowledge (3) to acknowledge a triggered high APL alarm for this channel. Enumeration: 'idle': 1, 'acknowledge': 3, 'unacknowledged': 2.
                 vm0002AplHighTrapEnable 1.3.6.1.4.1.4596.4.2.1.2.2.1.28 integer read-write
Set to enabled (1) to enable the high APL alarm trap for this channel. Enumeration: 'disabled': 2, 'enabled': 1.
                 vm0002AplLowThreshold 1.3.6.1.4.1.4596.4.2.1.2.2.1.29 integer read-write
The low APL alarm threshold for this channel, in IRE.
                 vm0002AplLowDuration 1.3.6.1.4.1.4596.4.2.1.2.2.1.30 integer read-write
The low APL duration, in milliseconds, at which to alarm, for this channel.
                 vm0002AplLowAlarmState 1.3.6.1.4.1.4596.4.2.1.2.2.1.31 integer read-only
The current state of the low APL alarm for this channel. Enumeration: 'ready': 1, 'triggered': 2.
                 vm0002AplLowAlarmAck 1.3.6.1.4.1.4596.4.2.1.2.2.1.32 integer read-write
Set to acknowledge (3) to acknowledge a triggered low APL alarm for this channel. Enumeration: 'idle': 1, 'acknowledge': 3, 'unacknowledged': 2.
                 vm0002AplLowTrapEnable 1.3.6.1.4.1.4596.4.2.1.2.2.1.33 integer read-write
Set to enabled (1) to enable the low APL alarm trap for this channel. Enumeration: 'disabled': 2, 'enabled': 1.
                 vm0002FrozenImageFilter 1.3.6.1.4.1.4596.4.2.1.2.2.1.34 integer read-write
The algorithm to use for the frozen image alarm for this channel.
                 vm0002MaxFrozenDuration 1.3.6.1.4.1.4596.4.2.1.2.2.1.35 integer read-write
The frozen image duration, in milliseconds, at which to alarm, for this channel.
                 vm0002FrozenAlarmState 1.3.6.1.4.1.4596.4.2.1.2.2.1.36 integer read-only
The current state of the frozen image alarm for this channel. Enumeration: 'ready': 1, 'triggered': 2.
                 vm0002FrozenAlarmAck 1.3.6.1.4.1.4596.4.2.1.2.2.1.37 integer read-write
Set to acknowledge (3) to acknowledge a triggered frozen image alarm for this channel. Enumeration: 'idle': 1, 'acknowledge': 3, 'unacknowledged': 2.
                 vm0002FrozenTrapEnable 1.3.6.1.4.1.4596.4.2.1.2.2.1.38 integer read-write
Set to enabled (1) to enable the frozen image alarm trap for this channel. Enumeration: 'disabled': 2, 'enabled': 1.
                 vm0002BurstPresent 1.3.6.1.4.1.4596.4.2.1.2.2.1.39 integer read-write
Indicates whether color burst is present on this channel. Enumeration: 'notPresent': 2, 'present': 1.
         vm0002AnalogVideoEvents 1.3.6.1.4.1.4596.4.2.1.2.3
             vm0002AnalogVideoEventsV2 1.3.6.1.4.1.4596.4.2.1.2.3.0
                 analogVideoVSyncLossAlarm 1.3.6.1.4.1.4596.4.2.1.2.3.0.1
An Analog Video vertical sync loss alarm was triggered.
                 analogVideoHSyncLossAlarm 1.3.6.1.4.1.4596.4.2.1.2.3.0.2
An Analog Video horizontal sync loss alarm was triggered.
                 analogVideoPedestalHighAlarm 1.3.6.1.4.1.4596.4.2.1.2.3.0.3
An Analog Video pedestal high alarm was triggered.
                 analogVideoAPLHighAlarm 1.3.6.1.4.1.4596.4.2.1.2.3.0.4
An Analog Video APL high alarm was triggered.
                 analogVideoAPLLowAlarm 1.3.6.1.4.1.4596.4.2.1.2.3.0.5
An Analog Video APL low alarm was triggered.
                 analogVideoFrozenImageAlarm 1.3.6.1.4.1.4596.4.2.1.2.3.0.6
An Analog Video frozen image alarm was triggered.
 videoframeSigmonVm0002MIB 1.3.6.1.4.1.4596.6.1.5
This MIB describes the device specific objects of the VM0002 Analog Video Monitoring module, and augments MIB-2, VF-GENERIC, and VF-SIGMON in the identification of this Videoframe Systems managed device. This module will be extended or modified as required. Videoframe Systems reserves the right to make changes in specification and other information contained in this document without prior notice. The reader should consult Videoframe Systems to determine whether any such changes have been made. In no event shall Videoframe Systems be liable for any incidental, indirect, special, or consequential damages whatsoever (including but not limited to lost profits) arising out of or related to this document or the information contained in it. Videoframe Systems grants vendors, end users, and other interested parties a non-exclusive license to use this specification in connection with the management of Videoframe Systems products. Copyright 2001 Videoframe, Inc.
     vfProductsVM0002Reg 1.3.6.1.4.1.4596.6.2.5.2
Videoframe VM0002 Analog Video Monitoring Module.