VERILINK-ENTERPRISE-NCMQUAD-MIB: View SNMP OID List / Download MIB

VENDOR: VERILINK CORP


 Home MIB: VERILINK-ENTERPRISE-NCMQUAD-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 verilink 1.3.6.1.4.1.321
         as2000 1.3.6.1.4.1.321.1
             ncm_quad 1.3.6.1.4.1.321.1.3009
                       ncmquadConfigTable 1.3.6.1.4.1.321.1.3009.11000 no-access
                                   ncmquadConfigEntry 1.3.6.1.4.1.321.1.3009.11000.1 no-access
An entry in the QUAD Configuration table.
                                       ncmquadLineIndex 1.3.6.1.4.1.321.1.3009.11000.1.1 integer read-only
This object is the identifier of a Inter- face on a managed device. If there is an ifEn- try that is directly associated with this and only this DS1 interface, it should have the same value as ifIndex. Otherwise, the value exceeds ifNumber, and is a unique identifier following this rule: inside interfaces (e.g., equipment side) with even numbers and outside interfaces (e.g., network side) with odd numbers.
                                       ncmquadIfIndex 1.3.6.1.4.1.321.1.3009.11000.1.2 integer read-only
This value for this object is equal to the value of ifIndex from the Interfaces table of MIB II (RFC 1213).
                                       ncmquadEndId 1.3.6.1.4.1.321.1.3009.11000.1.3 integer read-only
This value for this object indicates which end of the equipment it is configuring. Enumeration: 'far-End': 1, 'near-End': 0.
                                       ncmquadPort 1.3.6.1.4.1.321.1.3009.11000.1.4 integer read-write
This variable indicates Whether the port is in service or out of service Enumeration: 'disabled': 1, 'enabled': 2.
                                       ncmquadLineType 1.3.6.1.4.1.321.1.3009.11000.1.5 integer read-write
This variable indicates the variety of Line implementing this circuit. The type of circuit affects the number of bits per second that the circuit can reasonably carry, as well as the interpretation of the usage and error statistics. The values, in sequence, describe: TITLE: SPECIFICATION: ESF Extended SuperFrame DS1 D4 AT&T D4 format DS1 Enumeration: 'eSF': 2, 'd4': 3, 'other': 1.
                                       ncmquadLineCoding 1.3.6.1.4.1.321.1.3009.11000.1.6 integer read-write
This variable describes the variety of Zero Code Suppression used on the link, which in turn affects a number of its characteristics. B8ZS refers to the use of a specified pat- tern of normal bits and bipolar violations which are used to replace a sequence of eight zero bits. AMI refers to a mode wherein no zero code suppression is present and the line encoding does not solve the problem directly. In this application, the higher layer must provide data which meets or exceeds the pulse density re- quirements, such as inverting HDLC data. Enumeration: 'aMI': 5, 'other': 6, 'b8ZS': 2.
                                       ncmquadFDL 1.3.6.1.4.1.321.1.3009.11000.1.7 integer read-write
The variable specifies the Disable/Enable of the ncmfdl State. Enumeration: 'disabled': 0, 'enabled': 1.
                                       ncmquadDensityPattern 1.3.6.1.4.1.321.1.3009.11000.1.8 integer read-write
This variable indicates what type of density network is being sent on the port or line by the device. The values mean : 'Disabled' refers to no network ones density exist. 'D80Zeros' refers to send a request for network one's density of 80 zeroes density pattern. 'D15Zeros' refers to send a request for network one's density of 15 zeroes density pattern. 'D12d5c80Zero'refers to send a request for 12.5% and 80 zeroes network one's density pattern. 'TR_62411' refers to sending a request for TR6241 network density pattern. 'Other' refers to sending a network's density pattern other than those described by this object[pvt]**. Enumeration: 'tR-62411': 4, 'd12d5c80Zero': 3, 'disabled': 6, 'other': 5, 'd80Zeros': 1, 'd15Zeros': 2.
                                       ncmquadNetworkLineBuildOut 1.3.6.1.4.1.321.1.3009.11000.1.9 integer read-write
This variable indicates the db rate at which the line or port using, i.e., is 0 , -7.5db, -15db or -22.5db.[pvt] Enumeration: 'bldLn-0db': 1, 'bldLnNeg15db': 3, 'bldLnNeg7d5db': 2, 'bldLnNeg22d5': 4.
                                       ncmquadNetworkLoopConfig 1.3.6.1.4.1.321.1.3009.11000.1.10 integer read-write
This variable represents whether the device can be configured throught the network for loopback. Here values mean : Disabled: This device cannot be loopbacked throught network. Enabled: This device can be loopbacked throught the network. Enumeration: 'disabled': 1, 'enabled': 2.
                                       ncmquadLineStatus 1.3.6.1.4.1.321.1.3009.11000.1.11 integer read-only
This variable indicates the Line Status of the interface. It contains loopback, failure, re- ceived 'alarm' and transmitted 'alarm' infor- mation. NoAlarms This variables indicates their is no alarms on this port or this line. Alarms This variables indicates their is alarms on line with any of the following bit map : The ncmquadLineStatus is a bit map represented as a sum, therefore, it can represent multiple failures (alarms) and a LoopbackState simultaneously. If the ncmquadLoopbackState bit is set, the loopback in ef- fect can be determined from the ncmquadLoopbackConfig object. The various bit positions are: 0 Reserved 1 quadCRC6error (1 = yes, 0 = no) 2 Reserved 3 FramingSlip (1 = yes, 0 = no) 4 quadRAI (1 = yes, 0 = no) 5 quadLOF LOF (1 = yes, 0 = no) 6 quadAIS AIS (1 = yes, 0 = no) 7 quadLOS LOS (1 = yes, 0 = no) 8~15 ReservedForOtherFailure Enumeration: 'alarms': 2, 'noAlarms': 1.
                                       ncmquadLoopbackConfig 1.3.6.1.4.1.321.1.3009.11000.1.12 integer read-write
This variable represents the loopback confi- guration of the DS1 interface. Agents support- ing read/write access should return badValue in response to a requested loopback state that the interface does not support. The values mean: quadNoLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as it's value. quadPayloadLoop The received signal at this interface is looped through the device. Typically the received signal is looped back for re- transmission after it has passed through the device's framing function. quadLineLoop The received signal at this interface does not go through the device (minimum pene- tration) but is looped back out. quadLocalLoopbk This variable indicates whether the local loopback is enabled or disabled on the port or line by the device. quadOtherLoop Loopbacks that are not defined here. Enumeration: 'noLoop': 1, 'quadActLLBBOP': 7, 'quadActPayloadLoop': 2, 'quadDeactLocalLoopbk': 11, 'quadActLineLoop': 3, 'quadDeactPLBBOP': 14, 'quadActLocalLoopbk': 5, 'quadDeactPayloadLoop': 9, 'quadDeactLineLoop': 10, 'quadDeactLLBBOP': 13, 'quadActPLBBOP': 8.
                                       ncmquadSendCode 1.3.6.1.4.1.321.1.3009.11000.1.13 integer read-write
This variable indicates what type of code is being sent across the DS1 interface by the dev- ice. The values mean: NoCode sending looped or normal data QRSS sending a Quasi-Random Signal (QRSS) test pattern 3in24type sending a fixed test pattern of 3 bits set in 24 Other sending a test pattern other than those described by this object Enumeration: 'three-in-24type': 7, 'other': 8, 'noCode': 1, 'qRSS': 5.
                                       ncmquadResetPerfReg 1.3.6.1.4.1.321.1.3009.11000.1.14 integer read-write
Reset Performance Monitoring registers. Enumeration: 'yes': 1, 'no': 2.
                                       ncmquadValidIntervals 1.3.6.1.4.1.321.1.3009.11000.1.15 integer read-only
The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in which case the value will be the number of complete 15 minute intervals the since interface has been online.
                                       ncmquadTimeElapsed 1.3.6.1.4.1.321.1.3009.11000.1.16 integer read-only
The number of seconds that have elapsed since the beginning of the current error-measurement period.
                                       ncmquadResetT1Error 1.3.6.1.4.1.321.1.3009.11000.1.17 integer read-write
This variable indicates the option for reseting the T1 error counters. Enumeration: 'yes': 1, 'no': 0.
                       ncmquadLossCurrentTable 1.3.6.1.4.1.321.1.3009.11001 no-access
                                   ncmquadLCurrentEntry 1.3.6.1.4.1.321.1.3009.11001.1 no-access
An entry in the Loss Current table.
                                       ncmquadLCurrentIndex 1.3.6.1.4.1.321.1.3009.11001.1.1 integer read-only
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value as a ncmquadLineIndex object instance.
                                       ncmquadCurrentEndId 1.3.6.1.4.1.321.1.3009.11001.1.2 integer read-only
This value for this object indicates which end of the equipment it is acessing. Enumeration: 'far-End': 1, 'near-End': 0.
                                       ncmquadLCurrentASs 1.3.6.1.4.1.321.1.3009.11001.1.3 gauge read-only
The number of Availabe Seconds, encountered by a DS1 interface in the current 15 minute inter- val. Remark: Available Seconds does not support for QUAD 2164.
                                       ncmquadLCurrentLOSs 1.3.6.1.4.1.321.1.3009.11001.1.4 gauge read-only
The number of Loss Of Signal Seconds encoun- tered by a DS1 interface in the current 15 minute interval.
                                       ncmquadLCurrentAISs 1.3.6.1.4.1.321.1.3009.11001.1.5 gauge read-only
The number of Alarm indication Signal Seconds encountered by a DS1 interface in the current 15 minute interval.
                                       ncmquadLCurrentLOFs 1.3.6.1.4.1.321.1.3009.11001.1.6 gauge read-only
The number of Loss of Frame Seconds encountered by a DS1 interface in the current 15 minute in- terval.
                                       ncmquadLCurrentOFs 1.3.6.1.4.1.321.1.3009.11001.1.7 gauge read-only
The number of Out of Frame Seconds encountered by a DS1 interface in the current 15 minute in- terval.
                                       ncmquadLCurrentESs 1.3.6.1.4.1.321.1.3009.11001.1.8 gauge read-only
The number of Errored Seconds encountered by a DS1 interface in the current 15 minute in- terval.
                                       ncmquadLCurrentSESs 1.3.6.1.4.1.321.1.3009.11001.1.9 gauge read-only
The number of Severely Errored Seconds encountered by a DS1 interface in the current 15 minute in- terval.
                                       ncmquadLCurrentSEFs 1.3.6.1.4.1.321.1.3009.11001.1.10 gauge read-only
The number of Severely Errored Framing Seconds encountered by a DS1 interface in the current 15 minute in- terval.
                                       ncmquadLCurrentUASs 1.3.6.1.4.1.321.1.3009.11001.1.11 gauge read-only
The number of Out of Unavailable Seconds encountered by a DS1 interface in the current 15 minute in- terval.
                                       ncmquadLCurrentBESs 1.3.6.1.4.1.321.1.3009.11001.1.12 gauge read-only
The number of Bursty Errored Seconds encountered by a DS1 interface in the current 15 minute in- terval.
                                       ncmquadLCurrentESAs 1.3.6.1.4.1.321.1.3009.11001.1.13 gauge read-only
The number of ESAs encountered by a DS1 interface in the current 15 minute in- terval.
                                       ncmquadLCurrentSASs 1.3.6.1.4.1.321.1.3009.11001.1.14 gauge read-only
The number of SASs encountered by a DS1 interface in the current 15 minute in- terval.
                                       ncmquadLCurrentCSSs 1.3.6.1.4.1.321.1.3009.11001.1.15 gauge read-only
The number of CSSs encountered by a DS1 interface in the current 15 minute in- terval.
                                       ncmquadLCurrentLOFCs 1.3.6.1.4.1.321.1.3009.11001.1.16 gauge read-only
The number of LOFCs encountered by a DS1 interface in the current 15 minute in- terval.
                       ncmquadLossIntervalTable 1.3.6.1.4.1.321.1.3009.11002 no-access
                                   ncmquadLIntervalEntry 1.3.6.1.4.1.321.1.3009.11002.1 no-access
An entry in the Loss Interval table.
                                       ncmquadLIntervalIndex 1.3.6.1.4.1.321.1.3009.11002.1.1 integer read-only
The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a ncmquadLineIndex object instance.
                                       ncmquadLIntervalEndId 1.3.6.1.4.1.321.1.3009.11002.1.2 integer read-only
This value for this object indicates which end of the equipment it is accessing. Enumeration: 'far-End': 1, 'near-End': 0.
                                       ncmquadLIntervalNumber 1.3.6.1.4.1.321.1.3009.11002.1.3 integer read-only
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming that all 96 intervals are valid).
                                       ncmquadLIntervalASs 1.3.6.1.4.1.321.1.3009.11002.1.4 gauge read-only
The number of Available Seconds encountered by a DS1 interface in one of the previous 96, indi- vidual 15 minute, intervals. Remark: Available Seconds does not support for QUAD 2164.
                                       ncmquadLIntervalLOSs 1.3.6.1.4.1.321.1.3009.11002.1.5 gauge read-only
The number of Loss of Signal Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
                                       ncmquadLIntervalAISs 1.3.6.1.4.1.321.1.3009.11002.1.6 gauge read-only
The number of Alarm Indication Signal Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
                                       ncmquadLIntervalLOFs 1.3.6.1.4.1.321.1.3009.11002.1.7 gauge read-only
The number of Loss Of Frame Seconds encountered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
                                       ncmquadLIntervalOFs 1.3.6.1.4.1.321.1.3009.11002.1.8 gauge read-only
The number of Out Of Frame Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
                                       ncmquadLIntervalESs 1.3.6.1.4.1.321.1.3009.11002.1.9 gauge read-only
The number of Error Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
                                       ncmquadLIntervalSESs 1.3.6.1.4.1.321.1.3009.11002.1.10 gauge read-only
The number of Severe Error Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
                                       ncmquadLIntervalSEFs 1.3.6.1.4.1.321.1.3009.11002.1.11 gauge read-only
The number of Severly Errored Frame Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
                                       ncmquadLIntervalUASs 1.3.6.1.4.1.321.1.3009.11002.1.12 gauge read-only
The number of Unavailable Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
                                       ncmquadLIntervalBESs 1.3.6.1.4.1.321.1.3009.11002.1.13 gauge read-only
The number of Bursty Error Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
                                       ncmquadLIntervalESAs 1.3.6.1.4.1.321.1.3009.11002.1.14 gauge read-only
The number of ESAs Seconds encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
                                       ncmquadLIntervalSASs 1.3.6.1.4.1.321.1.3009.11002.1.15 gauge read-only
The number of SASs encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
                                       ncmquadLIntervalCSSs 1.3.6.1.4.1.321.1.3009.11002.1.16 gauge read-only
The number of CSSs encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
                                       ncmquadLIntervalLOFCs 1.3.6.1.4.1.321.1.3009.11002.1.17 gauge read-only
The number of LOFCs encoun- tered by a DS1 interface in one of the previous 96, individual 15 minute, intervals.
                       ncmquadLossTotalTable 1.3.6.1.4.1.321.1.3009.11003 no-access
                                   ncmquadLTotalEntry 1.3.6.1.4.1.321.1.3009.11003.1 no-access
An entry in the DS1 Total Loss table.
                                       ncmquadLTotalIndex 1.3.6.1.4.1.321.1.3009.11003.1.1 integer read-only
The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a ncmquadLineIndex object instance.
                                       ncmquadTotalEndId 1.3.6.1.4.1.321.1.3009.11003.1.2 integer read-only
This value for this object indicates which end of the equipment it is accessing. Enumeration: 'far-End': 1, 'near-End': 0.
                                       ncmquadLTotalASs 1.3.6.1.4.1.321.1.3009.11003.1.3 gauge read-only
The number of Available Seconds encountered by a DS1 interface in the previous 24 hour interval. Remark: Available Seconds does not support for QUAD 2164.
                                       ncmquadLTotalLOSs 1.3.6.1.4.1.321.1.3009.11003.1.4 gauge read-only
The number of Loss Of Signal Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
                                       ncmquadLTotalAISs 1.3.6.1.4.1.321.1.3009.11003.1.5 gauge read-only
The number of Alarm Indication Signal Seconds encountered by a DS1 interface in the previous 24 hour interval.
                                       ncmquadLTotalLOFs 1.3.6.1.4.1.321.1.3009.11003.1.6 gauge read-only
The number of Loss Of Frame Seconds encountered by a DS1 interface in the previous 24 hour in- terval.
                                       ncmquadLTotalOFs 1.3.6.1.4.1.321.1.3009.11003.1.7 gauge read-only
The number of Controlled Slip Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
                                       ncmquadLTotalESs 1.3.6.1.4.1.321.1.3009.11003.1.8 gauge read-only
The number of Errored Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
                                       ncmquadLTotalSESs 1.3.6.1.4.1.321.1.3009.11003.1.9 gauge read-only
The number of Severly Errored Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
                                       ncmquadLTotalSEFs 1.3.6.1.4.1.321.1.3009.11003.1.10 gauge read-only
The number of Severly Errored Frame Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
                                       ncmquadLTotalUASs 1.3.6.1.4.1.321.1.3009.11003.1.11 gauge read-only
The number of Unavailable Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
                                       ncmquadLTotalBESs 1.3.6.1.4.1.321.1.3009.11003.1.12 gauge read-only
The number of Bursty Errored Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
                                       ncmquadLTotalESAs 1.3.6.1.4.1.321.1.3009.11003.1.13 gauge read-only
The number of ESAs Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
                                       ncmquadLTotalSASs 1.3.6.1.4.1.321.1.3009.11003.1.14 gauge read-only
The number of SASs encoun- tered by a DS1 interface in the previous 24 hour interval.
                                       ncmquadLTotalCSSs 1.3.6.1.4.1.321.1.3009.11003.1.15 gauge read-only
The number of CSSs Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
                                       ncmquadLTotalLOFCs 1.3.6.1.4.1.321.1.3009.11003.1.16 gauge read-only
The number of LOFCs Seconds encoun- tered by a DS1 interface in the previous 24 hour interval.
                       ncmadvancedT1ConfigTable 1.3.6.1.4.1.321.1.3009.11004 no-access
The ncmadvanced T1 Configuration table.
                                   ncmadvancedT1ConfigEntry 1.3.6.1.4.1.321.1.3009.11004.1 no-access
An entry in the ncmadvanced T1 Configuration table.
                                       ncmadvancedT1LineIndex 1.3.6.1.4.1.321.1.3009.11004.1.1 integer read-only
The index value which uniquely identifies the interface to which this entry is applicable.
                                       ncmportIdentifier 1.3.6.1.4.1.321.1.3009.11004.1.2 integer read-write
The variable specifies the port identifier and port_3 and port_4 are for Quad T1 only. Enumeration: 'port-4': 3, 'port-1': 0, 'port-2': 1, 'port-3': 2.
                                       ncmfdlMode 1.3.6.1.4.1.321.1.3009.11004.1.3 integer read-write
The variable specifies the ncmfdl mode which is bit 0 of ncmfdl Parameter1. Enumeration: 'terminated': 0, 'pass': 1.
                                       ncmfdlStandard 1.3.6.1.4.1.321.1.3009.11004.1.4 integer read-write
The variable specifies the ncmfdl standard which is bits 1 and bit 2 of ncmfdl Parameter1. Enumeration: 'type-T1-403': 8, 'reserved': 0, 'type-54016': 4, 'type-both': 12.
                                       ncmfdlPerformanceReport 1.3.6.1.4.1.321.1.3009.11004.1.5 integer read-write
The variable specifies the ncmfdl standard which is bits 3 and bit 4 of ncmfdl Parameter1. Enumeration: 'telco': 64, 'disable': 0, 'user': 32.
                                       ncmfdlLBEnableDisable 1.3.6.1.4.1.321.1.3009.11004.1.6 integer read-write
The variable specifies the Disable/Enable of the ncmfdl Loopback which is bit 0 of the ncmfdl_loop Enumeration: 'disabled': 0, 'enabled': 1.
                                       ncmfdlLLBT1BOPMsg 1.3.6.1.4.1.321.1.3009.11004.1.7 integer read-write
The variable specifies the Disable/Enable of the send/receive of the LLB T1.403 BOP Messages. It is the bit 1 of the ncmfdl_loop Enumeration: 'disabled': 0, 'enabled': 2.
                                       ncmfdlPLBT1BOPMsg 1.3.6.1.4.1.321.1.3009.11004.1.8 integer read-write
The variable specifies the Disable/Enable of the send/receive of the PLB T1.403 BOP Messages. It is the bit 2 of the ncmfdl_loop Enumeration: 'disabled': 0, 'enabled': 4.
                                       ncmfdlIdlePattern 1.3.6.1.4.1.321.1.3009.11004.1.9 integer read-write
The variable specifies the ncmfdl idle pattern which is bit 0 of ncmfdl Parameter2. Enumeration: 'all-ones': 0, 'flags': 1.
                                       ncmfdlMonitoringCsuType 1.3.6.1.4.1.321.1.3009.11004.1.10 integer read-write
The variable specifies the ncmfdl standard which is bits 1 and bit 2 of ncmfdl Parameter2. Enumeration: 'no-polling': 4, 'unsolicited-messages': 8, 'polling': 0.
                       ncmquadSyncTable 1.3.6.1.4.1.321.1.3009.11005 no-access
                                   ncmquadSyncEntry 1.3.6.1.4.1.321.1.3009.11005.1 no-access
An entry in the QUAD Sync Time table.
                                       ncmquadSyncIndex 1.3.6.1.4.1.321.1.3009.11005.1.1 integer read-only
This object is the identifier of a Inter- face on a managed device. If there is an ifEn- try that is directly associated with this and only this DS1 interface, it should have the same value as ifIndex. Otherwise, the value exceeds ifNumber, and is a unique identifier following this rule: inside interfaces (e.g., equipment side) with even numbers and outside interfaces (e.g., network side) with odd numbers.
                                       ncmquadSyncEndId 1.3.6.1.4.1.321.1.3009.11005.1.2 integer read-only
This value for this object indicates which end of the equipment it is configuring. Enumeration: 'far-End': 1, 'near-End': 0.
                                       ncmquadClkSyncSource 1.3.6.1.4.1.321.1.3009.11005.1.3 integer read-only
This variable indicates Current Clk Source Active i.e., primary, Alt_1 or Alt_2 source. Enumeration: 'primary': 0, 'alt-1': 1, 'alt-2': 2.
                                       ncmquadClkCardPrim 1.3.6.1.4.1.321.1.3009.11005.1.4 integer read-write
This variable indicates the primary clock source from which card of the that shelf. Enumeration: 'c-13': 12, 'c-12': 11, 'c-11': 10, 'c-10': 9, 'c-9': 8, 'c-8': 7, 'c-7': 6, 'c-6': 5, 'c-5': 4, 'c-4': 3, 'c-3': 2, 'c-2': 1, 'c-1': 0.
                                       ncmquadClkSyncPrimary 1.3.6.1.4.1.321.1.3009.11005.1.5 integer read-write
This variable indicates the Clock source internal, external or network port. Setting Auto restore one can have auto restore Capability. Enumeration: 'masterNet3': 4, 'masterNet2': 3, 'masterNet1': 2, 'masterNet4': 5, 'internal': 0, 'external': 1.
                                       ncmquadAutoRestorePrim 1.3.6.1.4.1.321.1.3009.11005.1.6 integer read-write
This variable indicates the Clock source auto restore or not for Internal, external or network clocks. Enumeration: 'enable': 1, 'disable': 0.
                                       ncmquadClkCardAlt1 1.3.6.1.4.1.321.1.3009.11005.1.7 integer read-write
This variable indicates the primary clock source from which card of the that shelf. Enumeration: 'c-13': 12, 'c-12': 11, 'c-11': 10, 'c-10': 9, 'c-9': 8, 'c-8': 7, 'c-7': 6, 'c-6': 5, 'c-5': 4, 'c-4': 3, 'c-3': 2, 'c-2': 1, 'c-1': 0.
                                       ncmquadClkSyncAlt1 1.3.6.1.4.1.321.1.3009.11005.1.8 integer read-write
This variable indicates the Clock source internal, external or network port. Setting Auto restore one can have auto restore Capability. Enumeration: 'masterNet3': 4, 'masterNet2': 3, 'masterNet1': 2, 'masterNet4': 5, 'internal': 0, 'external': 1.
                                       ncmquadAutoRestore1 1.3.6.1.4.1.321.1.3009.11005.1.9 integer read-write
This variable indicates the Clock source auto restore or not for Internal, external or network clocks. Enumeration: 'enable': 1, 'disable': 0.
                                       ncmquadClkCardAlt2 1.3.6.1.4.1.321.1.3009.11005.1.10 integer read-write
This variable indicates the primary clock source from which card of the that shelf. Enumeration: 'c-13': 12, 'c-12': 11, 'c-11': 10, 'c-10': 9, 'c-9': 8, 'c-8': 7, 'c-7': 6, 'c-6': 5, 'c-5': 4, 'c-4': 3, 'c-3': 2, 'c-2': 1, 'c-1': 0.
                                       ncmquadClkSyncAlt2 1.3.6.1.4.1.321.1.3009.11005.1.11 integer read-write
This variable indicates the Clock source internal, external or network port. Setting Auto restore one can have auto restore Capability. Enumeration: 'masterNet3': 4, 'masterNet2': 3, 'masterNet1': 2, 'masterNet4': 5, 'internal': 0, 'external': 1.
                                       ncmquadAutoRestore2 1.3.6.1.4.1.321.1.3009.11005.1.12 integer read-write
This variable indicates the Clock source auto restore or not for Internal, external or network clocks. Enumeration: 'enable': 1, 'disable': 0.