VERILINK-ENTERPRISE-NCMDS3-MIB: View SNMP OID List / Download MIB

VENDOR: VERILINK CORP


 Home MIB: VERILINK-ENTERPRISE-NCMDS3-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, VERILINK-ENTERPRISE-NCMALARM-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ncmhdmDs3PortTable 1.3.6.1.4.1.321.1.3036.9000 no-access
The HDM DS3 Port table.
           ncmhdmDs3PortEntry 1.3.6.1.4.1.321.1.3036.9000.1 no-access
An entry in the dsu information table.
               ncmhdmDs3PortNIDIndex 1.3.6.1.4.1.321.1.3036.9000.1.1 integer read-only
This variable indicates the node id value of the node.
               ncmhdmDs3PortIndex 1.3.6.1.4.1.321.1.3036.9000.1.2 integer read-only
The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a dsx1LineIndex object instance.
               ncmhdmDs3PerfControl 1.3.6.1.4.1.321.1.3036.9000.1.3 integer read-write
Performance Control Enabled/Disabled. Enumeration: 'disabled': 1, 'enabled': 2.
               ncmhdmDs3LBOSelection 1.3.6.1.4.1.321.1.3036.9000.1.4 integer read-write
Select the length of DS3 cable to be Normal (0-255 feet) or Long cable (225-450 feet). Enumeration: 'nORMAL-CABLE': 1, 'lONG-CABLE': 2.
               ncmhdmDs3DataRateMode 1.3.6.1.4.1.321.1.3036.9000.1.5 integer read-write
Data Rate Mode. Enumeration: 'only-NearEnd': 1, 'both-NearEndORFarEnd': 2, 'not-applicable': 3.
               ncmhdmDs3Rate 1.3.6.1.4.1.321.1.3036.9000.1.6 integer read-write
the date rate fro ds3 .
               ncmhdmDs3LineType 1.3.6.1.4.1.321.1.3036.9000.1.7 integer read-write
Line Type. Enumeration: 'dSX3CBitParity': 4, 'dsx3M13': 2.
               ncmhdmDs3LineCode 1.3.6.1.4.1.321.1.3036.9000.1.8 integer read-write
Line Code. Enumeration: 'dSX3CB3ZS': 2.
               ncmhdmDs3AISCBit 1.3.6.1.4.1.321.1.3036.9000.1.9 integer read-write
AISCBit. Enumeration: 'aISCBit': 1.
               ncmhdmDs3EquipCode 1.3.6.1.4.1.321.1.3036.9000.1.10 displaystring read-write
This is the Far End Equipment Identification code that describes the specific piece of equipment. It is sent within the Path Identification Message.
               ncmhdmDs3LocationIDCode 1.3.6.1.4.1.321.1.3036.9000.1.11 displaystring read-write
This is the Far End Location Identification code that describes the specific location of the equipment. It is sent within the Path Identification Message.
               ncmhdmDs3FrameIDCode 1.3.6.1.4.1.321.1.3036.9000.1.12 displaystring read-write
This is the Far End Frame Identification code that identifies where the equipment is located within a building at a given location. It is sent within the Path Identification Message.
               ncmhdmDs3UnitCode 1.3.6.1.4.1.321.1.3036.9000.1.13 displaystring read-write
This is the Far End code that identifies the equipment location within a bay. It is sent within the Path Identification Message.
               ncmhdmDs3FacilityIDCode 1.3.6.1.4.1.321.1.3036.9000.1.14 displaystring read-write
This code identifies a specific Far End DS3 path. It is sent within the Path Identification Message.
               ncmhdmDs3PortIdCode 1.3.6.1.4.1.321.1.3036.9000.1.15 displaystring read-write
Port ID.
               ncmhdmDs3CircuitID 1.3.6.1.4.1.321.1.3036.9000.1.16 displaystring read-write
Circuit ID.
               ncmhdmDs3GenIDCode 1.3.6.1.4.1.321.1.3036.9000.1.17 displaystring read-write
Test Signal Generator ID.
               ncmhdmDs3Inband 1.3.6.1.4.1.321.1.3036.9000.1.18 integer read-write
Inband signalling control. Enumeration: 'disabled': 1, 'enabled': 2.
 ncmhdmHssi1PortTable 1.3.6.1.4.1.321.1.3036.9001 no-access
The HDM HSSI Port table.
           ncmhdmHssi1PortEntry 1.3.6.1.4.1.321.1.3036.9001.1 no-access
An entry in the dsu information table.
               ncmhdmDs3Hssi1NIDIndex 1.3.6.1.4.1.321.1.3036.9001.1.1 integer read-only
This variable indicates the node id value of the node.
               ncmhdmHssi1PortIndex 1.3.6.1.4.1.321.1.3036.9001.1.2 integer read-only
The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a dsx1LineIndex object instance.
               ncmhdmHssi1ConfigMode 1.3.6.1.4.1.321.1.3036.9001.1.3 integer read-write
Set the Hssi Port to be automatic configuration or manual configuration. Enumeration: 'mANUAL': 2, 'aUTOMATIC': 1.
               ncmhdmHssi1PortConfig 1.3.6.1.4.1.321.1.3036.9001.1.4 integer read-write
Configure System - In-Service or Out of Service. Enumeration: 'iN-SERVICE': 2, 'oUT-OF-SERVICE': 1.
               ncmhdmHssi1TestMode 1.3.6.1.4.1.321.1.3036.9001.1.5 integer read-only
Report status of the test mode of HSSI port. Enumeration: 'disabled': 2, 'enabled': 1.
               ncmhdmHssi1DataRateMode 1.3.6.1.4.1.321.1.3036.9001.1.6 integer read-write
Data Rate Mode for the Hssi Ports . Enumeration: 'only-NearEnd': 1, 'both-NearEndORFarEnd': 2, 'not-applicable': 3.
               ncmhdmHssi1HssiRate 1.3.6.1.4.1.321.1.3036.9001.1.7 integer read-write
Data Rate in # of T1.
               ncmhdmHssi1CircuitID 1.3.6.1.4.1.321.1.3036.9001.1.8 displaystring read-write
This is the Circuit ID for the Hssi port.
 ncmhdmHssiStatTable 1.3.6.1.4.1.321.1.3036.9002 no-access
The HDM HSSI Stats.
           ncmhdmHssiStatEntry 1.3.6.1.4.1.321.1.3036.9002.1 no-access
An entry in the Hssi ds3 stats table.
               ncmhdmHssiStatNIDIndex 1.3.6.1.4.1.321.1.3036.9002.1.1 integer read-only
This variable indicates the node id value of the node.
               ncmhdmHssiStatIndex 1.3.6.1.4.1.321.1.3036.9002.1.2 integer read-only
The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a dsx1LineIndex object instance.
               ncmhdmStatDCEReady 1.3.6.1.4.1.321.1.3036.9002.1.3 integer read-only
Hssi Port DCE Ready OFF/ON. Enumeration: 'oN': 2, 'oFF': 1.
               ncmhdmStatDTEReady 1.3.6.1.4.1.321.1.3036.9002.1.4 integer read-only
Hssi Port DTE Ready OFF/ON. Enumeration: 'oN': 2, 'oFF': 1.
               ncmhdmStatLpbkA 1.3.6.1.4.1.321.1.3036.9002.1.5 integer read-only
Hssi Port - Loopback A OFF/ON. Enumeration: 'oN': 2, 'oFF': 1.
               ncmhdmStatLpbkB 1.3.6.1.4.1.321.1.3036.9002.1.6 integer read-only
Hssi Port - Loopback B OFF/ON. Enumeration: 'oN': 2, 'oFF': 1.
               ncmhdmStatTestMode 1.3.6.1.4.1.321.1.3036.9002.1.7 integer read-only
Hssi Port Test Mode OFF/ON. Enumeration: 'oN': 2, 'oFF': 1.
               ncmhdmStatPortState 1.3.6.1.4.1.321.1.3036.9002.1.8 integer read-only
Hssi Port - In-Service or Out of Service. Enumeration: 'iN-SERVICE': 2, 'oUT-OF-SERVICE': 1.
               ncmhdmStatCIMType 1.3.6.1.4.1.321.1.3036.9002.1.9 integer read-only
Ds3 Cim Type. Enumeration: 'cdm-2080': 59, 'cdm-2182': 63, 'cim-2080': 44.
               ncmhdmStatDiagStatus 1.3.6.1.4.1.321.1.3036.9002.1.10 integer read-only
Hssi User Equipment Loopback OFF/ON. Enumeration: 'oN': 2, 'oFF': 1.
 ncmhdmCurrentTable 1.3.6.1.4.1.321.1.3036.9003 no-access
The DS3/E3 Current table.
           ncmhdmCurrentEntry 1.3.6.1.4.1.321.1.3036.9003.1 no-access
An entry in the DS3/E3 Current table.
               ncmhdmCurrentNIDIndex 1.3.6.1.4.1.321.1.3036.9003.1.1 integer read-only
This variable indicates the node id value of the node.
               ncmhdmCurrentIndex 1.3.6.1.4.1.321.1.3036.9003.1.2 integer read-only
The index value which uniquely identifies the DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an ncmhdmLineIndex object instance.
               ncmhdmCurrentCRC4Status 1.3.6.1.4.1.321.1.3036.9003.1.3 integer read-only
Current CRC4 Status. Enumeration: 'disabled': 1.
               ncmhdmCurrentTimeStampSecs 1.3.6.1.4.1.321.1.3036.9003.1.4 integer read-only
Current Time in seconds.
               ncmhdmCurrentTimeStampMSecs 1.3.6.1.4.1.321.1.3036.9003.1.5 integer read-only
Current Time in milliseconds.
               ncmhdmCurrentSecsElaps 1.3.6.1.4.1.321.1.3036.9003.1.6 integer read-only
Seconds elapsed in the current interval.
               ncmhdmCurrentFarEndCCV 1.3.6.1.4.1.321.1.3036.9003.1.7 gauge read-only
The counter associated with the number of Far End C-bit Code Violations, in the current 15 minute interval.
               ncmhdmCurrentFarEndCES 1.3.6.1.4.1.321.1.3036.9003.1.8 gauge read-only
The counter associated with the number of Far End C-bit Errored Seconds, in the current 15 minute interval.
               ncmhdmCurrentFarEndCSES 1.3.6.1.4.1.321.1.3036.9003.1.9 gauge read-only
The counter associated with the number of Far End C-bit Severely Errored Seconds, in the current 15 minute interval.
               ncmhdmCurrentFarEndLUAS 1.3.6.1.4.1.321.1.3036.9003.1.10 gauge read-only
Far End Line Unavailable Seconds. The counter associated with the number of Seconds the Far End DS3 interface was Out Of Service in the current 15 minute interval.
               ncmhdmCurrentLCV 1.3.6.1.4.1.321.1.3036.9003.1.11 gauge read-only
The counter associated with the number of Line Code Violations, a bipolar or excesive zero violation, in the current 15 minute interval.
               ncmhdmCurrentLES 1.3.6.1.4.1.321.1.3036.9003.1.12 gauge read-only
Line Errored Second Total. The counter associated with the number of Seconds of in which one or more LCV occurred in the current 15 minute interval.
               ncmhdmCurrentLSESs 1.3.6.1.4.1.321.1.3036.9003.1.13 gauge read-only
The counter associated with the number of Line Severely Errored Seconds (LSES) in the current 15 minute interval.
               ncmhdmCurrentPCV 1.3.6.1.4.1.321.1.3036.9003.1.14 gauge read-only
The counter associated with the number of Parity Code Violations (locally calculated P-bits disagree with those received), in the current 15 minute interval.
               ncmhdmCurrentPES 1.3.6.1.4.1.321.1.3036.9003.1.15 gauge read-only
The counter associated with the number of Seconds having at least one Parity Code Violation, in the current 15 minute interval.
               ncmhdmCurrentPSES 1.3.6.1.4.1.321.1.3036.9003.1.16 gauge read-only
The counter associated with the number of Seconds having 44 or more Parity Code Violations, in the current 15 minute interval.
               ncmhdmCurrentCCV 1.3.6.1.4.1.321.1.3036.9003.1.17 gauge read-only
The counter associated with the number of C-bit Code Violations, in the current 15 minute interval.
               ncmhdmCurrentCES 1.3.6.1.4.1.321.1.3036.9003.1.18 gauge read-only
The counter associated with the number of C-bit Errored Seconds, in the current 15 minute interval.
               ncmhdmCurrentCSES 1.3.6.1.4.1.321.1.3036.9003.1.19 gauge read-only
The counter associated with the number of C-bit Severely Errored Seconds, in the current 15 minute interval.
               ncmhdmCurrentSEFS 1.3.6.1.4.1.321.1.3036.9003.1.20 gauge read-only
The counter associated with the number of seconds in which one or more Out of Frame occurred in the current 15 minute interval.
               ncmhdmCurrentAISS 1.3.6.1.4.1.321.1.3036.9003.1.21 gauge read-only
The counter associated with the number of Seconds in which one or more incoming AIS was detected in the current 15 minute interval.
               ncmhdmCurrentOOSSs 1.3.6.1.4.1.321.1.3036.9003.1.22 gauge read-only
The counter associated with the number of Seconds the DS3 interface was Out Of Service in the current 15 minute interval.
               ncmhdmCurrentLOSSs 1.3.6.1.4.1.321.1.3036.9003.1.23 gauge read-only
The counter associated with the number of Seconds Of system Loss Of Signal (LOS) in the current 15 minute interval.
               ncmhdmCurrentLOFSs 1.3.6.1.4.1.321.1.3036.9003.1.24 gauge read-only
The counter associated with the number of Seconds Of system Loss Of Frame (LOF) in the current 15 minute interval.
 ncmhdmIntervalTable 1.3.6.1.4.1.321.1.3036.9004 no-access
The DS3/E3 Interval table.
           ncmhdmIntervalEntry 1.3.6.1.4.1.321.1.3036.9004.1 no-access
An entry in the DS3/E3 Interval table.
               ncmhdmIntervalNIDIndex 1.3.6.1.4.1.321.1.3036.9004.1.1 integer read-only
This variable indicates the node id value of the node.
               ncmhdmIntervalIndex 1.3.6.1.4.1.321.1.3036.9004.1.2 integer read-only
The index value which uniquely identifies the DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an ncmhdmLineIndex object instance.
               ncmhdmIntervalNumber 1.3.6.1.4.1.321.1.3036.9004.1.3 integer read-only
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes inter- val (assuming that all 96 intervals are valid).
               ncmhdmIntervalFarEndCCV 1.3.6.1.4.1.321.1.3036.9004.1.4 gauge read-only
The counter associated with the number of Far End C-bit Code Violations, in the previous 15 minute interval.
               ncmhdmIntervalFarEndCES 1.3.6.1.4.1.321.1.3036.9004.1.5 gauge read-only
The counter associated with the number of Far End C-bit Errored Seconds, in the current 15 minute interval.
               ncmhdmIntervalFarEndCSES 1.3.6.1.4.1.321.1.3036.9004.1.6 gauge read-only
The counter associated with the number of Far End C-bit Severely Errored Seconds, in the current 15 minute interval.
               ncmhdmIntervalFarEndLUAS 1.3.6.1.4.1.321.1.3036.9004.1.7 gauge read-only
Far End Line Unavailable Seconds. The counter associated with the number of Seconds the Far End DS3 interface was Out Of Service in the current 15 minute interval.
               ncmhdmIntervalLCV 1.3.6.1.4.1.321.1.3036.9004.1.8 gauge read-only
The counter associated with the number of Line Code Violations, a bipolar or excesive zero violation, in the current 15 minute interval.
               ncmhdmIntervalLES 1.3.6.1.4.1.321.1.3036.9004.1.9 gauge read-only
Line Errored Second Total. The counter associated with the number of Seconds of in which one or more LCV occurred in the current 15 minute interval.
               ncmhdmIntervalLSESs 1.3.6.1.4.1.321.1.3036.9004.1.10 gauge read-only
The counter associated with the number of Line Severely Errored Seconds (LSES) in the current 15 minute interval.
               ncmhdmIntervalPCV 1.3.6.1.4.1.321.1.3036.9004.1.11 gauge read-only
The counter associated with the number of Parity Code Violations (locally calculated P-bits disagree with those received), in the current 15 minute interval.
               ncmhdmIntervalPES 1.3.6.1.4.1.321.1.3036.9004.1.12 gauge read-only
The counter associated with the number of Seconds having at least one Parity Code Violation, in the current 15 minute interval.
               ncmhdmIntervalPSES 1.3.6.1.4.1.321.1.3036.9004.1.13 gauge read-only
The counter associated with the number of Seconds having 44 or more Parity Code Violations, in the current 15 minute interval.
               ncmhdmIntervalCCV 1.3.6.1.4.1.321.1.3036.9004.1.14 gauge read-only
The counter associated with the number of C-bit Code Violations, in the current 15 minute interval.
               ncmhdmIntervalCES 1.3.6.1.4.1.321.1.3036.9004.1.15 gauge read-only
The counter associated with the number of C-bit Errored Seconds, in the current 15 minute interval.
               ncmhdmIntervalCSES 1.3.6.1.4.1.321.1.3036.9004.1.16 gauge read-only
The counter associated with the number of C-bit Severely Errored Seconds, in the current 15 minute interval.
               ncmhdmIntervalSEFS 1.3.6.1.4.1.321.1.3036.9004.1.17 gauge read-only
The counter associated with the number of seconds in which one or more Out of Frame occurred in the current 15 minute interval.
               ncmhdmIntervalAISS 1.3.6.1.4.1.321.1.3036.9004.1.18 gauge read-only
The counter associated with the number of Seconds in which one or more incoming AIS was detected in the current 15 minute interval.
               ncmhdmIntervalOOSSs 1.3.6.1.4.1.321.1.3036.9004.1.19 gauge read-only
The counter associated with the number of Seconds the DS3 interface was Out Of Service in the current 15 minute interval.
               ncmhdmIntervalLOSSs 1.3.6.1.4.1.321.1.3036.9004.1.20 gauge read-only
The counter associated with the number of Seconds Of system Loss Of Signal (LOS) in the current 15 minute interval.
               ncmhdmIntervalLOFSs 1.3.6.1.4.1.321.1.3036.9004.1.21 gauge read-only
The counter associated with the number of Seconds Of system Loss Of Frame (LOF) in the current 15 minute interval.
 ncmhdmTotalTable 1.3.6.1.4.1.321.1.3036.9005 no-access
The DS3/E3 Total table.
           ncmhdmTotalEntry 1.3.6.1.4.1.321.1.3036.9005.1 no-access
An entry in the DS3/E3 Total table.
               ncmhdmTotalNIDIndex 1.3.6.1.4.1.321.1.3036.9005.1.1 integer read-only
This variable indicates the node id value of the node.
               ncmhdmTotalIndex 1.3.6.1.4.1.321.1.3036.9005.1.2 integer read-only
The index value which uniquely identifies the DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an ncmhdmLineIndex object instance.
               ncmhdmTotalCRC4Status 1.3.6.1.4.1.321.1.3036.9005.1.3 integer read-only
CRC4 Status. Enumeration: 'disabled': 1.
               ncmhdmTotalValidInterv 1.3.6.1.4.1.321.1.3036.9005.1.4 integer read-only
The number of valid intervals.
               ncmhdmTotalFarEndCCV 1.3.6.1.4.1.321.1.3036.9005.1.5 gauge read-only
The counter associated with the number of Far End C-bit Code Violations, in the last 24 hour interval.
               ncmhdmTotalFarEndCES 1.3.6.1.4.1.321.1.3036.9005.1.6 gauge read-only
The counter associated with the number of Far End C-bit Errored Seconds, in the last 24 hour interval.
               ncmhdmTotalFarEndCSES 1.3.6.1.4.1.321.1.3036.9005.1.7 gauge read-only
The counter associated with the number of Far End C-bit Severely Errored Seconds, in the last 24 hour interval.
               ncmhdmTotalFarEndLUAS 1.3.6.1.4.1.321.1.3036.9005.1.8 gauge read-only
Far End Line Unavailable Seconds. The counter associated with the number of Seconds the Far End DS3 interface was Out Of Service in the last 24 hour interval.
               ncmhdmTotalLCV 1.3.6.1.4.1.321.1.3036.9005.1.9 gauge read-only
The counter associated with the number of Line Code Violations, a bipolar or excesive zero violation, in the last 24 hour interval.
               ncmhdmTotalLES 1.3.6.1.4.1.321.1.3036.9005.1.10 gauge read-only
Line Errored Second Total. The counter associated with the number of Seconds of in which one or more LCV occurred in the last 24 hour interval.
               ncmhdmTotalLSESs 1.3.6.1.4.1.321.1.3036.9005.1.11 gauge read-only
The counter associated with the number of Seconds Of Line Severely Errored Seconds (LSES) in the last 24 hour interval.
               ncmhdmTotalPCV 1.3.6.1.4.1.321.1.3036.9005.1.12 gauge read-only
The counter associated with the number of Parity Code Violations (locally calculated P-bits disagree with those received), in the last 24 hour interval.
               ncmhdmTotalPES 1.3.6.1.4.1.321.1.3036.9005.1.13 gauge read-only
The counter associated with the number of Seconds having at least one Parity Code Violation, in the last 24 hour interval.
               ncmhdmTotalPSES 1.3.6.1.4.1.321.1.3036.9005.1.14 gauge read-only
The counter associated with the number of Seconds having 44 or more Parity Code Violations, in the last 24 hour interval.
               ncmhdmTotalCCV 1.3.6.1.4.1.321.1.3036.9005.1.15 gauge read-only
The counter associated with the number of C-bit Code Violations, in the last 24 hour interval.
               ncmhdmTotalCES 1.3.6.1.4.1.321.1.3036.9005.1.16 gauge read-only
The counter associated with the number of C-bit Errored Seconds, in the last 24 hour interval.
               ncmhdmTotalCSES 1.3.6.1.4.1.321.1.3036.9005.1.17 gauge read-only
The counter associated with the number of C-bit Severely Errored Seconds, in the last 24 hour interval.
               ncmhdmTotalSEFS 1.3.6.1.4.1.321.1.3036.9005.1.18 gauge read-only
The counter associated with the number of seconds in which one or more Out of Frame occurred in the last 24 hour interval.
               ncmhdmTotalAISS 1.3.6.1.4.1.321.1.3036.9005.1.19 gauge read-only
The counter associated with the number of Seconds in which one or more incoming AIS was detected in the last 24 hour interval.
               ncmhdmTotalOOSSs 1.3.6.1.4.1.321.1.3036.9005.1.20 gauge read-only
The counter associated with the number of Seconds the DS3 interface was Out Of Service in the last 24 hour interval.
               ncmhdmTotalLOSSs 1.3.6.1.4.1.321.1.3036.9005.1.21 gauge read-only
The counter associated with the number of Seconds Of system Loss Of Signal (LOS) in the last 24 hour interval.
               ncmhdmTotalLOFSs 1.3.6.1.4.1.321.1.3036.9005.1.22 gauge read-only
The counter associated with the number of Seconds Of system Loss Of Frame (LOF) in the last 24 hour interval.
 ncmDs3PerformanceSnapShotTable 1.3.6.1.4.1.321.1.3036.9006 no-access
           ncmDs3PerformanceSnapShotEntry 1.3.6.1.4.1.321.1.3036.9006.1 no-access
An entry in the Ds3 Performance Snap Shot Entry table.
               ncmDs3SnapShotNIDIndex 1.3.6.1.4.1.321.1.3036.9006.1.1 integer read-only
The object specifies the node id index of the node.
               ncmDs3SnapShotIndex 1.3.6.1.4.1.321.1.3036.9006.1.2 integer read-only
The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a LineIndex object instance.
               ncmDs3SnapShotCRC4Status 1.3.6.1.4.1.321.1.3036.9006.1.3 integer read-only
CRC4 Status. Enumeration: 'disabled': 1.
               ncmDs3SnapShot 1.3.6.1.4.1.321.1.3036.9006.1.4 integer read-write
The variable specifies the option to initiate snap shot command. Enumeration: 'yes': 2, 'no': 1.
               ncmDs3TimeStampSec 1.3.6.1.4.1.321.1.3036.9006.1.5 integer read-only
The variable specifies the Time Stamp in Seconds .
               ncmDs3TimeStampMilliSec 1.3.6.1.4.1.321.1.3036.9006.1.6 integer read-only
The variable specifies the Time Stamp in milli Seconds .
               ncmDs3SnapShotSecs 1.3.6.1.4.1.321.1.3036.9006.1.7 integer read-only
The variable specifies number of seconds in the current interval.
               ncmDs3ResetPerfReg 1.3.6.1.4.1.321.1.3036.9006.1.8 integer read-write
Reset Performance Monitoring registers. Enumeration: 'yes': 2, 'no': 1.
 ncmhdmTCAQtrTable 1.3.6.1.4.1.321.1.3036.9007 no-access
The quarter hour Alert Threshold Table.
           ncmhdmTCAQtrEntry 1.3.6.1.4.1.321.1.3036.9007.1 no-access
An entry in the DS3/E3 table.
               ncmhdmTCAQtrNIDIndex 1.3.6.1.4.1.321.1.3036.9007.1.1 integer read-only
This variable indicates the node id value of the node.
               ncmhdmTCAQtrIndex 1.3.6.1.4.1.321.1.3036.9007.1.2 integer read-only
The index value which uniquely identifies the alert crossing threshold interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an plcpLineIndex object instance.
               ncmhdmTCAQtrDs3FarEndCCV 1.3.6.1.4.1.321.1.3036.9007.1.3 integer read-write
The performance alert threshold for DS3 layer Far End C-bit Code Violation in 1/4 hour boundary.
               ncmhdmTCAQtrDs3FarEndCES 1.3.6.1.4.1.321.1.3036.9007.1.4 integer read-write
The performance alert threshold for DS3 Far End C-bit Errored Seconds, in 1/4 hour boundary.
               ncmhdmTCAQtrDs3FarEndCSES 1.3.6.1.4.1.321.1.3036.9007.1.5 integer read-write
The performance alert threshold for DS3 Far End C-bit Severely Errored Seconds, in 1/4 hour boundary.
               ncmhdmTCAQtrDs3FarEndLUAS 1.3.6.1.4.1.321.1.3036.9007.1.6 integer read-write
The performance alert threshold for DS3 layer Far End Line Unavailable Seconds in 1/4 hour boundary.
               ncmhdmTCAQtrDs3LCV 1.3.6.1.4.1.321.1.3036.9007.1.7 integer read-write
The performance alert threshold for DS3 layer Line code Violation in 1/4 hour boundary.
               ncmhdmTCAQtrDs3LES 1.3.6.1.4.1.321.1.3036.9007.1.8 integer read-write
The performance alert threshold for DS3 layer Line Errored Second in 1/4 hour boundary.
               ncmhdmTCAQtrDs3LSESs 1.3.6.1.4.1.321.1.3036.9007.1.9 integer read-write
The performance alert threshold for DS3 layer Line Severely Errored Second in 1/4 hour boundary.
               ncmhdmTCAQtrDs3PCV 1.3.6.1.4.1.321.1.3036.9007.1.10 integer read-write
The performance alert threshold for DS3 layer Parity Code Violation in 1/4 hour boundary.
               ncmhdmTCAQtrDs3PES 1.3.6.1.4.1.321.1.3036.9007.1.11 integer read-write
The performance alert threshold for DS3 layer Parity Errored Second in 1/4 hour boundary.
               ncmhdmTCAQtrDs3PSES 1.3.6.1.4.1.321.1.3036.9007.1.12 integer read-write
The performance alert threshold for DS3 layer Parity Severely Errored Second in 1/4 hour boundary.
               ncmhdmTCAQtrDs3CCV 1.3.6.1.4.1.321.1.3036.9007.1.13 integer read-write
The performance alert threshold for DS3 layer C-bit Code Violation in 1/4 hour boundary.
               ncmhdmTCAQtrDs3CES 1.3.6.1.4.1.321.1.3036.9007.1.14 integer read-write
The performance alert threshold for DS3 Far End C-bit Errored Seconds, layer Errored Second in 1/4 hour boundary.
               ncmhdmTCAQtrDs3CSES 1.3.6.1.4.1.321.1.3036.9007.1.15 integer read-write
The performance alert threshold for DS3 layer C-bit Severely Errored Second in 1/4 hour boundary.
               ncmhdmTCAQtrDs3SEFS 1.3.6.1.4.1.321.1.3036.9007.1.16 integer read-write
The performance alert threshold for DS3 layer Severely Errored Framing Seconds in 1/4 hour boundary.
               ncmhdmTCAQtrDs3AISS 1.3.6.1.4.1.321.1.3036.9007.1.17 integer read-write
The performance alert threshold for DS3 layer Alarm Indication Signal Second in 1/4 hour boundary.
               ncmhdmTCAQtrDs3LUASs 1.3.6.1.4.1.321.1.3036.9007.1.18 integer read-write
The performance alert threshold for DS3 layer Unavailable Second in 1/4 hour boundary.
               ncmhdmTCAQtrDs3LOSSs 1.3.6.1.4.1.321.1.3036.9007.1.19 integer read-write
The performance alert threshold for DS3 Loss of Signal (LOS) Seconds in 1/4 hour boundary.
               ncmhdmTCAQtrDs3LOFSs 1.3.6.1.4.1.321.1.3036.9007.1.20 integer read-write
The performance alert threshold for DS3 Loss of Frame (LOF) Seconds in 1/4 hour boundary.
 ncmhdmTCADayTable 1.3.6.1.4.1.321.1.3036.9008 no-access
The 24 hour Alert Threshold Table.
           ncmhdmTCADayEntry 1.3.6.1.4.1.321.1.3036.9008.1 no-access
An entry in the 24 hour Alert Threshold Table.
               ncmhdmTCADayNIDIndex 1.3.6.1.4.1.321.1.3036.9008.1.1 integer read-only
This variable indicates the node id value of the node.
               ncmhdmTCADayIndex 1.3.6.1.4.1.321.1.3036.9008.1.2 integer read-only
The index value which uniquely identifies the alert crossing threshold interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an plcpLineIndex object instance.
               ncmhdmTCADayDs3FarEndCCV 1.3.6.1.4.1.321.1.3036.9008.1.3 integer read-write
The performance alert threshold for DS3 layer Far End C-bit Code Violation in 24 hour boundary.
               ncmhdmTCADayDs3FarEndCES 1.3.6.1.4.1.321.1.3036.9008.1.4 integer read-write
The performance alert threshold for DS3 Far End C-bit Errored Seconds, in 24 hour boundary.
               ncmhdmTCADayDs3FarEndCSES 1.3.6.1.4.1.321.1.3036.9008.1.5 integer read-write
The performance alert threshold for DS3 Far End C-bit Severely Errored Seconds, in 24 hour boundary.
               ncmhdmTCADayDs3FarEndLUAS 1.3.6.1.4.1.321.1.3036.9008.1.6 integer read-write
The performance alert threshold for DS3 layer Far End Line Unavailable Seconds in 24 hour boundary.
               ncmhdmTCADayDs3LCV 1.3.6.1.4.1.321.1.3036.9008.1.7 integer read-write
The performance alert threshold for DS3 layer Line code Violation in 24 hour boundary.
               ncmhdmTCADayDs3LES 1.3.6.1.4.1.321.1.3036.9008.1.8 integer read-write
The performance alert threshold for DS3 layer Line Errored Second in 24 hour boundary.
               ncmhdmTCADayDs3LSESs 1.3.6.1.4.1.321.1.3036.9008.1.9 integer read-write
The performance alert threshold for DS3 layer Line Severely Errored Second in 24 hour boundary.
               ncmhdmTCADayDs3PCV 1.3.6.1.4.1.321.1.3036.9008.1.10 integer read-write
The performance alert threshold for DS3 layer Parity Code Violation in 24 hour boundary.
               ncmhdmTCADayDs3PES 1.3.6.1.4.1.321.1.3036.9008.1.11 integer read-write
The performance alert threshold for DS3 layer Parity Errored Second in 24 hour boundary.
               ncmhdmTCADayDs3PSES 1.3.6.1.4.1.321.1.3036.9008.1.12 integer read-write
The performance alert threshold for DS3 layer Parity Severely Errored Second in 24 hour boundary.
               ncmhdmTCADayDs3CCV 1.3.6.1.4.1.321.1.3036.9008.1.13 integer read-write
The performance alert threshold for DS3 layer C-bit Code Violation in 24 hour boundary.
               ncmhdmTCADayDs3CES 1.3.6.1.4.1.321.1.3036.9008.1.14 integer read-write
The performance alert threshold for DS3 C-bit Errored Seconds, in 24 hour boundary.
               ncmhdmTCADayDs3CSES 1.3.6.1.4.1.321.1.3036.9008.1.15 integer read-write
The performance alert threshold for DS3 C-bit Severely Errored Seconds, in 24 hour boundary.
               ncmhdmTCADayDs3SEFS 1.3.6.1.4.1.321.1.3036.9008.1.16 integer read-write
The performance alert threshold for DS3 layer Severely Errored Framing Seconds in 24 hour boundary.
               ncmhdmTCADayDs3AISS 1.3.6.1.4.1.321.1.3036.9008.1.17 integer read-write
The performance alert threshold for DS3 layer Alarm Indication Signal Second in 24 hour boundary.
               ncmhdmTCADayDs3LUASs 1.3.6.1.4.1.321.1.3036.9008.1.18 integer read-write
The performance alert threshold for DS3 layer Unavailable Second in 24 hour boundary.
               ncmhdmTCADayDs3LOSSs 1.3.6.1.4.1.321.1.3036.9008.1.19 integer read-write
The performance alert threshold for DS3 Loss of Signal (LOS) Seconds in 24 hour boundary.
               ncmhdmTCADayDs3LOFSs 1.3.6.1.4.1.321.1.3036.9008.1.20 integer read-write
The performance alert threshold for DS3 Loss of Frame (LOF) Seconds in 24 hour boundary.
 ncmhdmTxAlarmTable 1.3.6.1.4.1.321.1.3036.9009 no-access
DS3 Transmit alarm Table.
           ncmhdmTxAlarmEntry 1.3.6.1.4.1.321.1.3036.9009.1 no-access
An entry in the DS3/E3 Transmit Alarm table.
               ncmhdmTxAlarmNIDIndex 1.3.6.1.4.1.321.1.3036.9009.1.1 integer read-only
This variable indicates the node id value of the node.
               ncmhdmTxAlarmIndex 1.3.6.1.4.1.321.1.3036.9009.1.2 integer read-only
The index value which uniquely identifies the Transmit Alarm interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an Dsx3LineIndex object instance.
               ncmhdmTxYellowAlarm 1.3.6.1.4.1.321.1.3036.9009.1.3 integer read-write
Transmit the near-end yellow alarm. Enumeration: 'dISABLE': 2, 'eNABLE': 1.
               ncmhdmTxAIS 1.3.6.1.4.1.321.1.3036.9009.1.4 integer read-write
Transmit the near-end AIS alarm. Enumeration: 'dISABLE': 2, 'eNABLE': 1.
               ncmhdmTxIdleSignal 1.3.6.1.4.1.321.1.3036.9009.1.5 integer read-write
Transmit the near-end Idle alarm. Enumeration: 'dISABLE': 2, 'eNABLE': 1.
               ncmhdmTxFEBE 1.3.6.1.4.1.321.1.3036.9009.1.6 integer read-write
Near end unit transmits the FEBE alarm. Enumeration: 'dISABLE': 2, 'eNABLE': 1.
               ncmhdmTxFEACAlarm 1.3.6.1.4.1.321.1.3036.9009.1.7 integer read-write
This object describes which, if any, FEAC Alarm is enabled. Enumeration: 'eqptFailureNSA-Alarm': 7, 'nO-FEAC-Alarm-enabled': 1, 'idleReceived-Alarm': 6, 'oOF-Alarm': 4, 'eqptFailureSA-Alarm': 2, 'lOSHBER-Alarm': 3, 'commonEqptFailureNSA-Alarm': 8, 'aISReceived-Alarm': 5.
 ncmhdmDs3StatTable 1.3.6.1.4.1.321.1.3036.9010 no-access
The HDM Ds3 Stats.
           ncmhdmDs3StatEntry 1.3.6.1.4.1.321.1.3036.9010.1 no-access
An entry in the ds3 stats table.
               ncmhdmDs3StatNIDIndex 1.3.6.1.4.1.321.1.3036.9010.1.1 integer read-only
This variable indicates the node id value of the node.
               ncmhdmDs3StatIndex 1.3.6.1.4.1.321.1.3036.9010.1.2 integer read-only
The index value which uniquely identifies the DS1 interface to which this entry is applica- ble. The interface identified by a particular value of this index is the same interface as identified by the same value as a dsx1LineIndex object instance.
               ncmhdmDs3StatAIS 1.3.6.1.4.1.321.1.3036.9010.1.3 integer read-only
Port Status AIS off/on. Enumeration: 'oN': 2, 'oFF': 1.
               ncmhdmDs3StatIdle 1.3.6.1.4.1.321.1.3036.9010.1.4 integer read-only
port Status Idle off/on. Enumeration: 'oN': 2, 'oFF': 1.
               ncmhdmDs3StatYellowAlm 1.3.6.1.4.1.321.1.3036.9010.1.5 integer read-only
Port Status Yellow Alarm off/on. Enumeration: 'oN': 2, 'oFF': 1.
               ncmhdmDs3StatFrameLoss 1.3.6.1.4.1.321.1.3036.9010.1.6 integer read-only
off/on. Enumeration: 'oN': 2, 'oFF': 1.
               ncmhdmDs3StatSigLoss 1.3.6.1.4.1.321.1.3036.9010.1.7 integer read-only
Port Status Signal Loss off/on. Enumeration: 'oN': 2, 'oFF': 1.
               ncmhdmDs3StatPLCPYellow 1.3.6.1.4.1.321.1.3036.9010.1.8 integer read-only
Port Status PLCP Yellow Alarm off/on. Enumeration: 'oN': 2, 'oFF': 1.
               ncmhdmDs3StatPLCPFrmLoss 1.3.6.1.4.1.321.1.3036.9010.1.9 integer read-only
Port Status PLCP Frame Loss off/on. Enumeration: 'oN': 2, 'oFF': 1.
               ncmhdmDs3StatPLCPOOF 1.3.6.1.4.1.321.1.3036.9010.1.10 integer read-only
Port Status PLCP Out of Frame off/on. Enumeration: 'oN': 2, 'oFF': 1.
               ncmhdmDs3LpbkLocal 1.3.6.1.4.1.321.1.3036.9010.1.11 integer read-only
Local Loopback enabled/disabled. Enumeration: 'disabled': 1, 'enabled': 2.
               ncmhdmDs3LpbkPayload 1.3.6.1.4.1.321.1.3036.9010.1.12 integer read-only
Payload Loopback enabled/disabled. Enumeration: 'disabled': 1, 'enabled': 2.
               ncmhdmDs3LpbkFEAC 1.3.6.1.4.1.321.1.3036.9010.1.13 integer read-only
FEAC Loopback enabled/disabled. Enumeration: 'disabled': 1, 'enabled': 2.
               ncmhdmDs3LpbkFarEnd 1.3.6.1.4.1.321.1.3036.9010.1.14 integer read-only
Far end Loopback enabled/disabled. Enumeration: 'disabled': 1, 'enabled': 2.
 ncmhdmds3LPBKTable 1.3.6.1.4.1.321.1.3036.9011 no-access
The DS3/E3 Current table.
           ncmhdmds3LPBKEntry 1.3.6.1.4.1.321.1.3036.9011.1 no-access
An entry in the DS3 Loopback table.
               ncmhdmLPBKNIDIndex 1.3.6.1.4.1.321.1.3036.9011.1.1 integer read-only
This variable indicates the node id value of the node.
               ncmhdmds3LPBKIndex 1.3.6.1.4.1.321.1.3036.9011.1.2 integer read-only
The index value which uniquely identifies the DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an ncmhdmLineIndex object instance.
               ncmhdmDs3LPBKActivation 1.3.6.1.4.1.321.1.3036.9011.1.3 integer read-write
Ds3 Loopback enabled/disabled, and Ds3 Loopback Type. Enumeration: 'far-End-Lpbk-Activate': 12, 'fEAC-De-activate': 11, 'fEAC-Activate': 10, 'no-Loopback': 1, 'hSSI-A-Activate': 6, 'hSSI-A-De-activate': 7, 'hSSI-B-Activate': 8, 'hSSI-B-De-activate': 9, 'far-End-Lpbk-De-activate': 13, 'dS3-Internal-Activate': 2, 'dS3-Payload-Activate': 4, 'dS3-Internal-De-activate': 3, 'dS3-Payload-De-activate': 5.