Unisphere-Data-System-Clock-MIB: View SNMP OID List / Download MIB

VENDOR: JUNIPER


 Home MIB: Unisphere-Data-System-Clock-MIB
Download as:   
SNMPv2-CONF, Unisphere-Data-MIBs, SNMPv2-SMI, Unisphere-Data-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 usdSysClockMIB 1.3.6.1.4.1.4874.2.2.56
The System Clock and Network Time Protocol (NTP) MIB for the Unisphere Networks enterprise. The System Clock section of the MIB allows setting the system clock time, date and timezone. All definitions are based on the Gregorian calendar. The NTP portion of the MIB provides management for the local NTP client/server, which adheres to RFC 1305, the 'Network Time Protocol (Version 3) Specification, Implementation and Analysis'.
       usdSysClockObjects 1.3.6.1.4.1.4874.2.2.56.1
           usdSysClockTime 1.3.6.1.4.1.4874.2.2.56.1.1
               usdSysClockDateAndTime 1.3.6.1.4.1.4874.2.2.56.1.1.1 dateandtime read-write
This object is used to manage the system clock time, date and timezone. If the Network Time Protocol (NTP) is enabled, attempts to set this object will result in an inconsistantValue error. For sets, the implementation may check the value of the year and if it is outside of a 'reasonable' range (e.g., 1999..2035) it may return an inconsistantValue error. Only system clock time and date will be set if the timezone offset is not set along with the timezone name.
               usdSysClockTimeZoneName 1.3.6.1.4.1.4874.2.2.56.1.1.2 displaystring read-write
Name of the timezone. Timezone name take effects only with its offset set along with it.
           usdSysClockDst 1.3.6.1.4.1.4874.2.2.56.1.2
               usdSysClockDstName 1.3.6.1.4.1.4874.2.2.56.1.2.1 displaystring read-write
The name of the daylight savings time (DST) zone. Setting any standard US DST timezone name with recurrent mode will result in turning on corresponding DST recurrent mode values for the timezone.
               usdSysClockDstOffset 1.3.6.1.4.1.4874.2.2.56.1.2.2 integer32 read-write
The offset, in minutes, from the base timezone for the DST.
               usdSysClockDstStatus 1.3.6.1.4.1.4874.2.2.56.1.2.3 integer read-write
The state of DST. With each state, only corresponding objects can be set. When the state is off(0), set values will be ignored. Enumeration: 'recurrent': 1, 'off': 0, 'absolute': 2.
               usdSysClockDstAbsoluteStartTime 1.3.6.1.4.1.4874.2.2.56.1.2.4 dateandtime read-write
This object represents the start time for absolute DST. Only the year, month, day, hour and minutes fields of the object are used. The other fields will be ignored for a Set operation and will return zeroes for a Get operation.
               usdSysClockDstAbsoluteStopTime 1.3.6.1.4.1.4874.2.2.56.1.2.5 dateandtime read-write
This object represents the stop time for absolute DST. Only the year, month, day, hour and minutes fields of the object are used. The other fields will be ignored for a Set operation and will return zeroes when read.
               usdSysClockDstRecurStartMonth 1.3.6.1.4.1.4874.2.2.56.1.2.6 usdsysclockmonth read-write
The start month for DST recurrence. The default value is based on the 1987 law for the USA.
               usdSysClockDstRecurStartWeek 1.3.6.1.4.1.4874.2.2.56.1.2.7 usdsysclockweekofthemonth read-write
The start week of the month for DST recurrence. The default value is based on the 1987 law for the USA.
               usdSysClockDstRecurStartDay 1.3.6.1.4.1.4874.2.2.56.1.2.8 usdsysclockdayoftheweek read-write
The start day of the week for DST recurrence. The default value is based on the 1987 law for the USA.
               usdSysClockDstRecurStartHour 1.3.6.1.4.1.4874.2.2.56.1.2.9 usdsysclockhour read-write
The start hour for DST recurrence. The default value is based on the 1987 law for the USA.
               usdSysClockDstRecurStartMinute 1.3.6.1.4.1.4874.2.2.56.1.2.10 usdsysclockminute read-write
The start minute for DST recurrence. The default value is based on the 1987 law for the USA.
               usdSysClockDstRecurStopMonth 1.3.6.1.4.1.4874.2.2.56.1.2.11 usdsysclockmonth read-write
The stop month for DST recurrence. The default value is based on the 1987 law for the USA.
               usdSysClockDstRecurStopWeek 1.3.6.1.4.1.4874.2.2.56.1.2.12 usdsysclockweekofthemonth read-write
The stop week of the month for DST recurrence. The default value is based on the 1987 law for the USA.
               usdSysClockDstRecurStopDay 1.3.6.1.4.1.4874.2.2.56.1.2.13 usdsysclockdayoftheweek read-write
The stop day of the week for DST recurrence. The default value is based on the 1987 law for the USA.
               usdSysClockDstRecurStopHour 1.3.6.1.4.1.4874.2.2.56.1.2.14 usdsysclockhour read-write
The stop hour for DST recurrence. The default value is based on the 1987 law for the USA.
               usdSysClockDstRecurStopMinute 1.3.6.1.4.1.4874.2.2.56.1.2.15 usdsysclockminute read-write
The stop minutes for DST recurrence. The default value is based on the 1987 law for the USA.
       usdNtpObjects 1.3.6.1.4.1.4874.2.2.56.2
           usdNtpSysClock 1.3.6.1.4.1.4874.2.2.56.2.1
               usdNtpSysClockState 1.3.6.1.4.1.4874.2.2.56.2.1.1 integer read-only
Displays the state of the NTP on the system clock. Clock states are: 0 - Clock has never been calibrated for frequency errors 1 - Clock frequency errors calibration has done 2 - Clock time has set to server time 3 - Clock frequency errors calibration is going on 4 - Clock has synchronized its time 5 - Clock has detected spike Enumeration: 'setToServerTime': 2, 'synchronized': 4, 'frequencyCalibrationIsGoingOn': 3, 'frequencyCalibrated': 1, 'neverFrequencyCalibrated': 0, 'spikeDetected': 5.
               usdNtpSysClockOffsetError 1.3.6.1.4.1.4874.2.2.56.2.1.2 usdntpclocksignedtime read-only
Displays the estimated offset error of the system clock relative to the master clock in seconds. This variable can take on both positive and negative values; the value will be positive if the system clock is ahead of the master clock; the value will be negative if the system clock is behind the master clock. This offset value will be used by internal the NTP filter algorithm to adjust the system clock to correct its error.
               usdNtpSysClockFrequencyError 1.3.6.1.4.1.4874.2.2.56.2.1.3 integer32 read-only
Displays the system clock frequency error in parts per million (ppm). It will always be a positive value. This error adjustment happens when the system reboots or the NTP is enabled for the first time and it may take up to fifteen minutes to complete. Each system clock oscillator interrupts to update its clock. If for example, it interrupts one million time per second then it has resolution of microseconds. This is also frequency of the clock update. Frequency error represents failed to update by parts per millionth of a second. For example, if we have frequency error of 1ppm, it means clock is ahead by 0.864 second in a day and that much has to be corrected in a day for clock to be accurate. Frequency error varies with temperature. Due to this system clock has to be corrected when system boots based on temperature it has to operate.
               usdNtpSysClockRootDelay 1.3.6.1.4.1.4874.2.2.56.2.1.4 usdntpclocksignedtime read-only
This indicates the NTP time message total Network roundtrip delay to the primary reference source at the root of the synchronization subnet, in seconds. Note that this variable can take on both positive and negative values, depending on clock precision and skew.
               usdNtpSysClockRootDispersion 1.3.6.1.4.1.4874.2.2.56.2.1.5 usdntpclockunsignedtime read-only
This indicates the maximum error relative to the primary reference source at the root of the synchronization subnet, in seconds. Only positive values greater than zero are possible.
               usdNtpSysClockStratumNumber 1.3.6.1.4.1.4874.2.2.56.2.1.6 integer32 read-only
Displays the stratum number of the system clock. 1 - primary reference (e.g. calibrated atomic clock, radio clock) 2-255 - secondary reference (via NTP)
               usdNtpSysClockLastUpdateTime 1.3.6.1.4.1.4874.2.2.56.2.1.7 usdntptimestamp read-only
Displays the time of the system clock at the time when it was last updated by any associated NTP server(peer).
               usdNtpSysClockLastUpdateServer 1.3.6.1.4.1.4874.2.2.56.2.1.8 ipaddress read-only
Displays the IP address of the NTP server (peer) which done last update to the system clock.
           usdNtpClient 1.3.6.1.4.1.4874.2.2.56.2.2
               usdNtpClientAdminStatus 1.3.6.1.4.1.4874.2.2.56.2.2.1 usdenable read-write
By enabling/disabling the NTP admin status, the router is enabled/ disabled to run as NTP client for the correction and synchronization of the system clock time with the reliable time sources (stratum time servers). At any given time, only one NTP client can run on any router on the system. Sets the NTP admin status along with the routerIndex where NTP client has be enabled in that router context.
               usdNtpClientSystemRouterIndex 1.3.6.1.4.1.4874.2.2.56.2.2.2 unsigned32 read-only
The index of the router to be enabled or disabled as the system-wide NTP client. Always set along with usdNtpClientAdminStatus. This is also the router context when NTP is enabled.
               usdNtpClientPacketSourceIfIndex 1.3.6.1.4.1.4874.2.2.56.2.2.3 integer32 read-write
When the NTP client sends an NTP packet, the source IP address is normally set to the address of the interface through which the NTP packet is sent. Sets all the outgoing NTP packets' source ifIndex to one specific ifIndex on the NTP client from which the source ifIndex is taken. This ifIndex will be the index of the IP interface as NTP is IP/UDP based. If the value is zero, it means no interface has configured.
               usdNtpClientBroadcastDelay 1.3.6.1.4.1.4874.2.2.56.2.2.4 integer32 read-write
Allows to set the estimated round-trip broadcast delay between the system client and broadcast servers (peers).
               usdNtpClientIfTable 1.3.6.1.4.1.4874.2.2.56.2.2.5 no-access
Lists all the NTP client's interfaces enabled for NTP. All the IP interfaces on the NTP client are by default enabled for NTP communications and can be disabled individually on each IP interface. If desired, any IP interface can be blocked from participating in NTP communication.
                   usdNtpClientIfEntry 1.3.6.1.4.1.4874.2.2.56.2.2.5.1 no-access
Each entry is per interface config for NTP.
                       usdNtpClientIfRouterIndex 1.3.6.1.4.1.4874.2.2.56.2.2.5.1.1 unsigned32 no-access
The index of the router to be enabled or disabled as an NTP client.
                       usdNtpClientIfIfIndex 1.3.6.1.4.1.4874.2.2.56.2.2.5.1.2 integer32 no-access
The ifIndex of the interface on the NTP client.
                       usdNtpClientIfStatus 1.3.6.1.4.1.4874.2.2.56.2.2.5.1.3 truthvalue read-only
Enable/disable NTP on the interface.
                       usdNtpClientIfIsBroadcastClient 1.3.6.1.4.1.4874.2.2.56.2.2.5.1.4 truthvalue read-only
Enable/disable NTP client's interface as broadcast client. As NTP client's broadcast interface, it receives the broadcast NTP messages from the associated servers (peers).
           usdNtpServer 1.3.6.1.4.1.4874.2.2.56.2.3
               usdNtpServerStratumNumber 1.3.6.1.4.1.4874.2.2.56.2.3.1 integer32 read-write
Configure the stratum number (level) of the NTP server. Due to one system clock, setting the stratum number have a effect of setting all the NTP servers' stratum to one stratum number(level) on the system.
               usdNtpServerAdminStatus 1.3.6.1.4.1.4874.2.2.56.2.3.2 usdenable read-write
Enable/disable the NTP server on the router.
           usdNtpPeers 1.3.6.1.4.1.4874.2.2.56.2.4
               usdNtpPeerCfgTable 1.3.6.1.4.1.4874.2.2.56.2.4.1 no-access
This table provides information on the peers with which the NTP client has associations. The associated peers(servers) to client will be running different hosts.
                   usdNtpPeerCfgEntry 1.3.6.1.4.1.4874.2.2.56.2.4.1.1 no-access
Each entry provides one NTP server's configuration information. Each peer is uniquely identified by the routerIndex of the client to which it has to be associated and the Ip address of the remote server(peer) itself. Entries are automatically created when the user configures the remote peer NTP server info on the system which has to be associated with the NTP client and deleted when the user removes the peer association from the NTP server.
                       usdNtpPeerCfgIpAddress 1.3.6.1.4.1.4874.2.2.56.2.4.1.1.1 ipaddress no-access
Peer's IP address.
                       usdNtpPeerCfgNtpVersion 1.3.6.1.4.1.4874.2.2.56.2.4.1.1.2 integer32 read-only
Displays the peer server NTP software version.
                       usdNtpPeerCfgPacketSourceIfIndex 1.3.6.1.4.1.4874.2.2.56.2.4.1.1.3 integer32 read-only
All the outgoing NTP packets' source address can be configured to one specific interface address on the NTP peer server. This object allows to configure all the outgoing NTP packets' source IP ifIndex to one specific IP ifIndex on the NTP server.
                       usdNtpPeerCfgIsPreferred 1.3.6.1.4.1.4874.2.2.56.2.4.1.1.4 truthvalue read-only
Select whether this NTP server is a preferred time source to the NTP client to which it has association.
                       usdNtpPeerCfgRowStatus 1.3.6.1.4.1.4874.2.2.56.2.4.1.1.5 rowstatus read-only
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdNtpPeerCfgRowStatus
               usdNtpPeerTable 1.3.6.1.4.1.4874.2.2.56.2.4.2 no-access
This table provides information on the peers with which the NTP client has associations. The associated peers (servers) to client will be running different hosts.
                   usdNtpPeerEntry 1.3.6.1.4.1.4874.2.2.56.2.4.2.1 no-access
Each entry provides one NTP server (peer) information. Each peer is uniquely identified by the routerIndex of the client to which it has to be associated and the Ip address of the remote server (peer) itself. Entries are automatically created when the user configures the remote peer NTP server info on the system which has to be associated with the NTP client and deleted when the user removes the peer association from the NTP server.
                       usdNtpPeerState 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.1 octet string read-only
Displays the peer server association state to NTP client on the system. Bit Peer State Description --- ---------- ------------------------------------------------ 0 master Means NTP client on the system has chosen this peer server as the master. 1 configured Confirms peer server configured for the NTP client. 2 selected NTP client will consider this peer server when it chooses the master. 3 unusable Indication that the server does not meet the initial criteria for the master 4 preferred Indicates as preferred time source. 5 correct NTP client considers the peer server's clock is reasonably correct. 6 incorrect NTP client considers the peer server's clock is not reasonably correct 7 reserved Each bit position value of 0 and 1 disables and enables that peer state respectively.
                       usdNtpPeerStratumNumber 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.2 integer32 read-only
Displays the peer server system clock stratum number.
                       usdNtpPeerAssociationMode 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.3 integer read-only
Displays the peer server association mode to the NTP client on the router. broadcastServer - Broadcast only NTP messages. multicastServer - Broadcast only NTP messages for IGMP multicast Network. unicastServer - Only sends NTP poll messages to the peer servers. Enumeration: 'broacastServer': 0, 'unicastServer': 2, 'multicastServer': 1.
                       usdNtpPeerBroadcastInterval 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.4 integer32 read-only
Displays the broadcast time interval of the NTP time messages from the peer when the peer is enabled either as broadcast server or multicast server.
                       usdNtpPeerPolledInterval 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.5 integer32 read-only
Displays the time interval at which peer will be polled by NTP client with which peer has associations when it is enabled as unicast server.
                       usdNtpPeerPollingInterval 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.6 integer32 read-only
Displays the time interval at which peer will poll the servers with which peer has associations when it is enabled as unicast server.
                       usdNtpPeerDelay 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.7 usdntpclocksignedtime read-only
Displays the peer server broadcast delay.
                       usdNtpPeerDispersion 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.8 usdntpclockunsignedtime read-only
Displays the peer server dispersion.
                       usdNtpPeerOffsetError 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.9 usdntpclocksignedtime read-only
Displays the peer server offset error.
                       usdNtpPeerReachability 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.10 octet string read-only
Displays the peer reachability status. An 8-bit number that shows whether or not the peer server responded to the last eight requests to the server to which it has association; one indicates a response, zero indicates no response. Count from rightmost to leftmost as latest to later requests as reachability states. For example, 0b11111111 indicates that the peer server responded to the last eight requests. If the system client reaches one peer server less often than it does other peer servers, that server is not a good choice for the master
                       usdNtpPeerRootDelay 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.11 usdntpclocksignedtime read-only
Displays the peer server root delay.
                       usdNtpPeerRootDispersion 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.12 usdntpclockunsignedtime read-only
Displays the peer server root dispersion.
                       usdNtpPeerRootSyncDistance 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.13 usdntpclocksignedtime read-only
Displays the peer server synchronization distance. Measure of the total time error since the update in the path to the stratum 1 server.
                       usdNtpPeerRootTime 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.14 usdntptimestamp read-only
Last time at which the stratum 1 server sent clock update reply to the this peer server.
                       usdNtpPeerRootTimeUpdateServer 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.15 ipaddress read-only
IP address of the stratum 1 server last updated the peer server.
                       usdNtpPeerReceiveTime 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.16 usdntptimestamp read-only
If the peer server is either broadcast or multicast server, this will represent time stamp at which NTP client received the broadcast message. If it is unicast server, it represents the time stamp at which the peer has sent the response to the NTP client poll message.
                       usdNtpPeerTransmitTime 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.17 usdntptimestamp read-only
If the peer server is either broadcast or multicast server, this will represent time stamp at which peer sent the broadcast message. If it is unicast server, it represents the time stamp at which the NTP client has received response from the peer.
                       usdNtpPeerRequestTime 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.18 usdntptimestamp read-only
For unicast server, it represents the time stamp at which the system client sent NTP request to the peer.
                       usdNtpPeerPrecision 1.3.6.1.4.1.4874.2.2.56.2.4.2.1.19 usdntpclocksignedtime read-only
Length of the clock tick (interrupt interval) of the server's clock.
               usdNtpPeerFilterRegisterTable 1.3.6.1.4.1.4874.2.2.56.2.4.3 no-access
The following table contains NTP state variables used by the NTP clock filter and selection algorithms. This table depicts a shift register. Each stage in the shift register is a 3-tuple consisting of the measured clock offset, measured clock delay and measured clock dispersion associated with a single observation. The NTP clock-filter and selection algorithms are designed to minimize the error in the calculated time by using the objects values in the filter table.
                   usdNtpPeerFilterRegisterEntry 1.3.6.1.4.1.4874.2.2.56.2.4.3.1 no-access
Each entry corresponds to one stage of the shift register and reading one set of values clock delay, clock offset and clock dispersion. Entries are automatically created whenever a peer is configured and deleted when the peer is removed.
                       usdNtpPeerFilterIndex 1.3.6.1.4.1.4874.2.2.56.2.4.3.1.1 unsigned32 no-access
An integer value in the specified range that is used to index into the table. The size of the table is fixed at 8. Each entry identifies a particular reading of the clock filter variables in the shift register. Entries are added starting at index 1. The index wraps back to 1 when it reaches 8. When the index wraps back, the new entries will overwrite the old entries effectively deleting the old entry.
                       usdNtpPeerFilterOffset 1.3.6.1.4.1.4874.2.2.56.2.4.3.1.2 usdntpclocksignedtime read-only
The offset of the peer clock relative to the system clock in seconds.
                       usdNtpPeerFilterDelay 1.3.6.1.4.1.4874.2.2.56.2.4.3.1.3 usdntpclocksignedtime read-only
Roundtrip delay of the peer clock relative to the system clock over the network path between them, in seconds. This variable can take on both positive and negative values, depending on clock precision and skew-error accumulation.
                       usdNtpPeerFilterDispersion 1.3.6.1.4.1.4874.2.2.56.2.4.3.1.4 usdntpclockunsignedtime read-only
The maximum error of the peer clock relative to the system clock over the network path between them, in seconds. Only positive values greater than zero are possible.
           usdNtpAccessGroup 1.3.6.1.4.1.4874.2.2.56.2.5
               usdNtpRouterAccessGroupPeer 1.3.6.1.4.1.4874.2.2.56.2.5.1 displaystring read-write
Configure the name of the peer access list for the NTP enabled router.
               usdNtpRouterAccessGroupServe 1.3.6.1.4.1.4874.2.2.56.2.5.2 displaystring read-write
Configure the name of the serve access list for the NTP enabled router.
               usdNtpRouterAccessGroupServeOnly 1.3.6.1.4.1.4874.2.2.56.2.5.3 displaystring read-write
Configure the name of the serve-only access list for the NTP enabled router.
               usdNtpRouterAccessGroupQueryOnly 1.3.6.1.4.1.4874.2.2.56.2.5.4 displaystring read-write
Configure the name of the peer query-only list for the NTP enabled router.
       usdSysClockConformance 1.3.6.1.4.1.4874.2.2.56.3
           usdSysClockCompliances 1.3.6.1.4.1.4874.2.2.56.3.1
               usdSysClockCompliance 1.3.6.1.4.1.4874.2.2.56.3.1.1
The compliance statement for entities that implement the Unisphere System Clock MIB.
           usdSysClockGroups 1.3.6.1.4.1.4874.2.2.56.3.2
               usdSysClockTimeGroup 1.3.6.1.4.1.4874.2.2.56.3.2.1
The management objects pertaining to the System Clock current date and time.
               usdSysClockDstGroup 1.3.6.1.4.1.4874.2.2.56.3.2.2
The management objects pertaining to the System Clock daylight savings time information.
               usdNtpSysClockGroup 1.3.6.1.4.1.4874.2.2.56.3.2.3
The management objects pertaining to the system clock when NTP is configured on the system.
               usdNtpClientGroup 1.3.6.1.4.1.4874.2.2.56.3.2.4
The management objects pertaining to the NTP client group.
               usdNtpServerGroup 1.3.6.1.4.1.4874.2.2.56.3.2.5
The management objects pertaining to the NTP server group.
               usdNtpPeersGroup 1.3.6.1.4.1.4874.2.2.56.3.2.6
The management objects pertaining to the NTP peers group.
               usdNtpAccessGroupGroup 1.3.6.1.4.1.4874.2.2.56.3.2.7
The management objects pertaining to the NTP per router access group.