Unisphere-Data-SONET-MIB: View SNMP OID List / Download MIB

VENDOR: JUNIPER


 Home MIB: Unisphere-Data-SONET-MIB
Download as:   
SNMPv2-CONF, Unisphere-Data-MIBs, IF-MIB, SNMPv2-SMI, Unisphere-Data-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 usdSonetMIB 1.3.6.1.4.1.4874.2.2.7
The SONET MIB for the Unisphere Networks Inc. enterprise.
     usdSonetObjects 1.3.6.1.4.1.4874.2.2.7.1
         usdSonetMediumTable 1.3.6.1.4.1.4874.2.2.7.1.1 no-access
This table contains entries for SONET interfaces present in the system.
             usdSonetMediumEntry 1.3.6.1.4.1.4874.2.2.7.1.1.1 no-access
Each entry describes the characteristics of an SONET interface.
                 usdSonetMediumType 1.3.6.1.4.1.4874.2.2.7.1.1.1.1 integer read-write
This variable identifies whether a SONET or a SDH signal is used across this interface. This object was deprecated because the same information is provided by the SONET-MIB.sonetMediumType object (RFC 2558). Enumeration: 'sonet': 1, 'sdh': 2.
                 usdSonetMediumLoopbackConfig 1.3.6.1.4.1.4874.2.2.7.1.1.1.2 integer read-write
The current loopback state of the SONET/SDH interface. The values mean: sonetNoLoop Not in the loopback state. A device that is not capable of performing a loopback on this interface shall always return this value. sonetFacilityLoop The received signal at this interface is looped back out through the corresponding transmitter in the return direction. sonetTerminalLoop The signal that is about to be transmitted is connected to the associated incoming receiver. sonetOtherLoop Loopbacks that are not defined here. Enumeration: 'sonetFacilityLoop': 1, 'sonetNoLoop': 0, 'sonetTerminalLoop': 2, 'sonetOtherLoop': 3.
                 usdSonetMediumTimingSource 1.3.6.1.4.1.4874.2.2.7.1.1.1.3 integer read-write
Selects the source from which transmit timing is derived. loop(0) indicates timing is recovered from the receiver; internalModule(1) indicates timing is from the module associated with this interface; internalChassis(3) indicates timing is taken from the internal system timing reference. Enumeration: 'internalModule': 1, 'loop': 0, 'internalChassis': 2.
                 usdSonetMediumCircuitIdentifier 1.3.6.1.4.1.4874.2.2.7.1.1.1.4 displaystring read-write
This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting. This object was deprecated because the same information is provided by the SONET-MIB.sonetMediumCircuitIdentifier object (RFC 2558).
     usdSonetPathObjects 1.3.6.1.4.1.4874.2.2.7.2
         usdSonetPathCapabilityTable 1.3.6.1.4.1.4874.2.2.7.2.1 no-access
This table contains entries for SONET Paths present in the system.
             usdSonetPathCapabilityEntry 1.3.6.1.4.1.4874.2.2.7.2.1.1 no-access
Each entry describes the SONET path capability of a SONET interface. This table is index by the ifIndex of the SONET interface.
                 usdSonetPathRemoveFlag 1.3.6.1.4.1.4874.2.2.7.2.1.1.1 truthvalue read-only
This variable identifies whether a SONET/SDH supports the deletion of SONET Paths. A value of true(1) indicates the SONET path is removable; a value of false(2) indicates the SONET path cannot be removed.
                 usdSonetPathChannelized 1.3.6.1.4.1.4874.2.2.7.2.1.1.2 truthvalue read-only
Identifies whether or not this SONET interface supports channelization. A value of true(1) indicates the SONET path is channelized; a value of false(2) indicates the SONET path is not channelized.
                 usdSonetPathMaximumChannels 1.3.6.1.4.1.4874.2.2.7.2.1.1.3 unsigned32 read-only
Identifies the maximum number of SONET paths/channels for this interface.
                 usdSonetPathMinimumPathSpeed 1.3.6.1.4.1.4874.2.2.7.2.1.1.4 usdsonetlinespeed read-only
Identifies the minimum SONET path speed for this interface.
                 usdSonetPathMaximumPathSpeed 1.3.6.1.4.1.4874.2.2.7.2.1.1.5 usdsonetlinespeed read-only
Identifies the maximum SONET path speed for this interface.
         usdSonetPathNextIfIndex 1.3.6.1.4.1.4874.2.2.7.2.2 usdnextifindex read-only
Coordinate ifIndex value allocation for entries in usdSonetPathTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
         usdSonetPathTable 1.3.6.1.4.1.4874.2.2.7.2.3 no-access
This table contains entries for SONET Path interfaces present in the system.
             usdSonetPathEntry 1.3.6.1.4.1.4874.2.2.7.2.3.1 no-access
Each entry describes the characteristics of an SONET Path interface.
                 usdSonetPathIfIndex 1.3.6.1.4.1.4874.2.2.7.2.3.1.1 interfaceindex no-access
The ifIndex of the SONET Path interface. When creating entries in this table, suitable values for this object are determined by reading usdSonetPathNextIfIndex.
                 usdSonetPathLogicalChannel 1.3.6.1.4.1.4874.2.2.7.2.3.1.2 usdsonetlogicalpathchannel read-only
The logical channel number assigned to this SONET Path. If the underlying SONET interface does not support channelization, the value of this object is zero.
                 usdSonetPathSpeed 1.3.6.1.4.1.4874.2.2.7.2.3.1.3 usdsonetlinespeed read-only
The line speed associated with this SONET PATH.
                 usdSonetPathHierarchy 1.3.6.1.4.1.4874.2.2.7.2.3.1.4 usdsonetpathhierarchy read-only
The SONET Path hierarchy associated with this path.
                 usdSonetPathLowerIfIndex 1.3.6.1.4.1.4874.2.2.7.2.3.1.5 interfaceindexorzero read-only
The ifIndex of the interface over which this SONET Path interface is to be layered - typically a SONET/SDH interface. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.
                 usdSonetPathRowStatus 1.3.6.1.4.1.4874.2.2.7.2.3.1.6 rowstatus read-only
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdSonetPathRowStatus usdSonetPathLogicalChannel usdSonetPathSpeed usdSonetPathHierarchy usdSonetPathLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for usdSonetPathIfIndex must have been determined previously, by reading usdSonetPathNextIfIndex. The interface identified by the usdSonetPathLowerIfIndex must exist. The usdSonetPathSpeed must be consistent with the speed for the channel specified by the usdSonetPathHierarchy, based on the speed of the interface identified by the usdSonetPathLowerIfIndex. A corresponding entry in ifTable/ifXTable/usdIfTable is created/ destroyed as a result of creating/destroying an entry in this table.
     usdSonetVTObjects 1.3.6.1.4.1.4874.2.2.7.3
         usdSonetVTNextIfIndex 1.3.6.1.4.1.4874.2.2.7.3.1 usdnextifindex read-only
Coordinate ifIndex value allocation for entries in usdSonetVTTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
         usdSonetVTTable 1.3.6.1.4.1.4874.2.2.7.3.2 no-access
This table contains entries for SONET Virtual Tributary interfaces present in the system. This table augments the standard SONET-MIB.sonetVTCurrentTable.
             usdSonetVTEntry 1.3.6.1.4.1.4874.2.2.7.3.2.1 no-access
Each entry describes the characteristics of an SONET Virtual Tributary interface.
                 usdSonetVTIfIndex 1.3.6.1.4.1.4874.2.2.7.3.2.1.1 interfaceindex no-access
The ifIndex of the SONET Virtual Tributary interface. When creating entries in this table, suitable values for this object are determined by reading usdSonetVTNextIfIndex.
                 usdSonetVTPathLogicalChannel 1.3.6.1.4.1.4874.2.2.7.3.2.1.2 usdsonetlogicalpathchannel read-only
The SONET Path logical channel number associated with this virtual tributary.
                 usdSonetVTType 1.3.6.1.4.1.4874.2.2.7.3.2.1.3 usdsonetvttype read-only
The SONET virtual tributary type. This object was deprecated because the same information is provided in the SONET-MIB.sonetVTCurrentWidth object.
                 usdSonetVTPathPayload 1.3.6.1.4.1.4874.2.2.7.3.2.1.4 unsigned32 read-only
The SONET Path payload number associated with this virtual tributary. For SDH mode, this is a value with a range from 1-3. For SONET mode, the value of this object is always 1.
                 usdSonetVTTributaryGroup 1.3.6.1.4.1.4874.2.2.7.3.2.1.5 unsigned32 read-only
The SONET Path group number for this virtual tributary. In SONET and SDH mode, the value of this object is 1-7.
                 usdSonetVTTributarySubChannel 1.3.6.1.4.1.4874.2.2.7.3.2.1.6 unsigned32 read-only
Specifies the virtual tributary number within the tributary group defined by usdSonetVTTributaryGroup object. The value of this object ranges from 1-4 if the tributary type is tribVT15/TU11(0); and the values 1-3 if the tributary type is tribVT20/TU12(1).
                 usdSonetVTLowerIfIndex 1.3.6.1.4.1.4874.2.2.7.3.2.1.7 interfaceindexorzero read-only
The ifIndex of the interface over which this SONET Virtual Tributary interface is to be layered - typically a SONET PATH interface. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.
                 usdSonetVTRowStatus 1.3.6.1.4.1.4874.2.2.7.3.2.1.8 rowstatus read-only
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdSonetVTRowStatus usdSonetVTPathLogicalChannel usdSonetVTType usdSonetVTPathPayload usdSonetVTTributaryGroup usdSonetVTTributarySubChannel usdSonetVTLowerIfIndex In addition, when creating an entry the following conditions must hold: A value for usdSonetVTIfIndex must have been determined previously, by reading usdSonetVTNextIfIndex. The interface identified by usdSonetVTLowerIfIndex must exist. A corresponding entry in ifTable/ifXTable/usdIfTable is created/ destroyed as a result of creating/destroying an entry in this table.
     usdSonetConformance 1.3.6.1.4.1.4874.2.2.7.4
         usdSonetCompliances 1.3.6.1.4.1.4874.2.2.7.4.1
             usdSonetCompliance 1.3.6.1.4.1.4874.2.2.7.4.1.1
Obsolete compliance statement for entities which implement the Unisphere SONET MIB. This statement became obsolete when the SONET Path and SONET VT groups of objects were added.
             usdSonetCompliance2 1.3.6.1.4.1.4874.2.2.7.4.1.2
Deprecated compliance statement for entities which implement the Unisphere SONET MIB. This statement became deprecated when the usdSonetMediumType, usdSonetMediumCircuitIdentifier and usdSonetVTType objects were deprecated.
             usdSonetCompliance3 1.3.6.1.4.1.4874.2.2.7.4.1.3
The compliance statement for entities which implement the Unisphere SONET MIB.
         usdSonetGroups 1.3.6.1.4.1.4874.2.2.7.4.2
             usdSonetGroup 1.3.6.1.4.1.4874.2.2.7.4.2.1
Deprecated collection of objects providing management of SONET/SDH interfaces in a Unisphere product. This group became deprecated when the usdSonetMediumType and usdSonetMediumCircuitIdentifier objects were deprecated.
             usdSonetPathGroup 1.3.6.1.4.1.4874.2.2.7.4.2.2
A collection of objects providing management of SONET/SDH and SONET Path interfaces in a Unisphere product.
             usdSonetVirtualTributaryGroup 1.3.6.1.4.1.4874.2.2.7.4.2.3
Deprecated collection of objects providing management of SONET virtual tributaries in a Unisphere product. This group became deprecated when usdSonetVTType was deprecated.
             usdSonetGroup2 1.3.6.1.4.1.4874.2.2.7.4.2.4
A collection of objects providing management of SONET/SDH interfaces in a Unisphere product.
             usdSonetVirtualTributaryGroup2 1.3.6.1.4.1.4874.2.2.7.4.2.5
A collection of objects providing management of SONET virtual tributaries in a Unisphere product.