Unisphere-Data-OSPF-MIB: View SNMP OID List / Download MIB

VENDOR: JUNIPER


 Home MIB: Unisphere-Data-OSPF-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 usdOspfMIB 1.3.6.1.4.1.4874.2.2.14
The OSPF Protocol MIB for the Unisphere Networks Inc. enterprise.
       usdOspfObjects 1.3.6.1.4.1.4874.2.2.14.1
           usdOspfGeneralGroup 1.3.6.1.4.1.4874.2.2.14.1.1
               usdOspfProcessId 1.3.6.1.4.1.4874.2.2.14.1.1.1 integer32 read-write
An identifier having special semantics when set. When this object's value is zero, OSPF is disabled and cannot be configured. Setting this object to a nonzero value enables OSPF operation and permits further OSPF configuration to be performed. Once set to a nonzero value, this object cannot be modified.
               usdOspfMaxPathSplits 1.3.6.1.4.1.4874.2.2.14.1.1.2 integer32 read-write
The maximum number of equal-cost routes that will be maintained by the OSPF protocol. A change in this value will be taken into account at the next shortest-path-first recalculation.
               usdOspfSpfHoldInterval 1.3.6.1.4.1.4874.2.2.14.1.1.3 integer32 read-write
The minimum amount of time that must elapse between shortest-path-first recalculations. Reducing this value can cause an immediate SPF recalulation if the new value is less than the current value of usdOspfSpfHoldTimeRemaining and other SPF-inducing protocol events have occurred.
               usdOspfNumActiveAreas 1.3.6.1.4.1.4874.2.2.14.1.1.4 counter32 read-only
The number of active areas.
               usdOspfSpfTime 1.3.6.1.4.1.4874.2.2.14.1.1.5 counter32 read-only
The SPF schedule delay.
               usdOspfRefBw 1.3.6.1.4.1.4874.2.2.14.1.1.6 unsigned32 read-write
The reference bandwith, in bits per second. This object is used when OSPF automatic interface cost calculation is used.
               usdOspfAutoVlink 1.3.6.1.4.1.4874.2.2.14.1.1.7 truthvalue read-write
Set this object to true(1) in order to have virtual links automatically configured.
               usdOspfIntraDistance 1.3.6.1.4.1.4874.2.2.14.1.1.8 integer32 read-write
Default distance for intra-area routes.
               usdOspfInterDistance 1.3.6.1.4.1.4874.2.2.14.1.1.9 integer32 read-write
Default distance for inter-area routes.
               usdOspfExtDistance 1.3.6.1.4.1.4874.2.2.14.1.1.10 integer32 read-write
Default distance for external type 5 and type 7 routes.
               usdOspfHelloPktsRcv 1.3.6.1.4.1.4874.2.2.14.1.1.11 counter32 read-only
Number of hello packets received.
               usdOspfDDPktsRcv 1.3.6.1.4.1.4874.2.2.14.1.1.12 counter32 read-only
Number of database description packets received.
               usdOspfLsrPktsRcv 1.3.6.1.4.1.4874.2.2.14.1.1.13 counter32 read-only
Number of link state request packets received.
               usdOspfLsuPktsRcv 1.3.6.1.4.1.4874.2.2.14.1.1.14 counter32 read-only
Number of link state update packets received.
               usdOspfLsAckPktsRcv 1.3.6.1.4.1.4874.2.2.14.1.1.15 counter32 read-only
Number of link state ACK packets received.
               usdOspfTotalRcv 1.3.6.1.4.1.4874.2.2.14.1.1.16 counter32 read-only
Number of OSPF packets received.
               usdOspfLsaDiscardCnt 1.3.6.1.4.1.4874.2.2.14.1.1.17 counter32 read-only
Number of LSA packets discarded.
               usdOspfHelloPktsSent 1.3.6.1.4.1.4874.2.2.14.1.1.18 counter32 read-only
Number of hello packets sent.
               usdOspfDDPktsSent 1.3.6.1.4.1.4874.2.2.14.1.1.19 counter32 read-only
Number of database description packets sent.
               usdOspfLsrPktsSent 1.3.6.1.4.1.4874.2.2.14.1.1.20 counter32 read-only
Number of link state request packets sent.
               usdOspfLsuPktsSent 1.3.6.1.4.1.4874.2.2.14.1.1.21 counter32 read-only
Number of link state update packets sent.
               usdOspfLsAckPktsSent 1.3.6.1.4.1.4874.2.2.14.1.1.22 counter32 read-only
Number of link state ACK packets sent.
               usdOspfErrPktsSent 1.3.6.1.4.1.4874.2.2.14.1.1.23 counter32 read-only
Number of packets dropped.
               usdOspfTotalSent 1.3.6.1.4.1.4874.2.2.14.1.1.24 counter32 read-only
Number of OSPF packets sent.
               usdOspfCsumErrPkts 1.3.6.1.4.1.4874.2.2.14.1.1.25 counter32 read-only
Number of packets received with a checksum error.
               usdOspfAllocFailNbr 1.3.6.1.4.1.4874.2.2.14.1.1.26 counter32 read-only
Number of neighbor allocation failures.
               usdOspfAllocFailLsa 1.3.6.1.4.1.4874.2.2.14.1.1.27 counter32 read-only
Number of LSA allocation failures.
               usdOspfAllocFailLsd 1.3.6.1.4.1.4874.2.2.14.1.1.28 counter32 read-only
Number of LSA HDR allocation failures.
               usdOspfAllocFailDbRequest 1.3.6.1.4.1.4874.2.2.14.1.1.29 counter32 read-only
Number of database request allocation failures.
               usdOspfAllocFailRtx 1.3.6.1.4.1.4874.2.2.14.1.1.30 counter32 read-only
Number of RTX allocation failures.
               usdOspfAllocFailAck 1.3.6.1.4.1.4874.2.2.14.1.1.31 counter32 read-only
Number of LS ACK allocation failures.
               usdOspfAllocFailDbPkt 1.3.6.1.4.1.4874.2.2.14.1.1.32 counter32 read-only
Number of DD packet allocation failures.
               usdOspfAllocFailCirc 1.3.6.1.4.1.4874.2.2.14.1.1.33 counter32 read-only
Number of OSPF interface allocation failures.
               usdOspfAllocFailPkt 1.3.6.1.4.1.4874.2.2.14.1.1.34 counter32 read-only
Number of OSPF general packet allocation failures.
               usdOspfOperState 1.3.6.1.4.1.4874.2.2.14.1.1.35 truthvalue read-only
A flag to note whether this router is operational.
               usdOspfVpnRouteTag 1.3.6.1.4.1.4874.2.2.14.1.1.36 unsigned32 read-write
VPN route tag value.
               usdOspfDomainId 1.3.6.1.4.1.4874.2.2.14.1.1.37 unsigned32 read-write
OSPF domain ID.
               usdOspfMplsTeRtrIdIfIndex 1.3.6.1.4.1.4874.2.2.14.1.1.38 interfaceindex read-write
Configure the stable router interface id to designate it as TE capable.
           usdOspfAreaTable 1.3.6.1.4.1.4874.2.2.14.1.2 no-access
The Unisphere OSPF area table describes the OSPF-specific characteristics of areas.
               usdOspfAreaEntry 1.3.6.1.4.1.4874.2.2.14.1.2.1 no-access
The OSPF area entry describes OSPF-specific characteristics of one area.
                   usdOspfAreaType 1.3.6.1.4.1.4874.2.2.14.1.2.1.1 integer read-only
The type of this area. Enumeration: 'nssaArea': 3, 'transitArea': 1, 'stubArea': 2.
                   usdOspfAreaTeCapable 1.3.6.1.4.1.4874.2.2.14.1.2.1.2 truthvalue read-write
Configure the specified area TE capable to flood the TE information.
           usdOspfIfTable 1.3.6.1.4.1.4874.2.2.14.1.7 no-access
The Unisphere OSPF interface table describes the OSPF-specific characteristics of interfaces.
               usdOspfIfEntry 1.3.6.1.4.1.4874.2.2.14.1.7.1 no-access
The OSPF interface entry describes OSPF-specific characteristics of one interface.
                   usdOspfIfCost 1.3.6.1.4.1.4874.2.2.14.1.7.1.1 integer32 read-only
The cost value for this interface.
                   usdOspfIfMask 1.3.6.1.4.1.4874.2.2.14.1.7.1.2 ipaddress read-only
The mask used to derive the network range of this interface.
                   usdOspfIfPassiveFlag 1.3.6.1.4.1.4874.2.2.14.1.7.1.3 integer read-only
Flag to indicate whether routing updates should be suppressed on this interface. To actively perform routing updates, set this object to disabled(0). Enumeration: 'disabled': 0, 'enabled': 1.
                   usdOspfIfNbrCount 1.3.6.1.4.1.4874.2.2.14.1.7.1.4 counter32 read-only
Number of OSPF neighbors from this interface.
                   usdOspfIfAdjNbrCount 1.3.6.1.4.1.4874.2.2.14.1.7.1.5 counter32 read-only
Number of OSPF adjacent neighbors from this interface.
                   usdOspfIfMd5AuthKey 1.3.6.1.4.1.4874.2.2.14.1.7.1.6 octet string read-only
The MD5 authentication key. When setting this object, the usdOspfIfMd5AuthKeyId must be specified on the same PDU. For simple text authentication type, use ospfIfAuthKey. Setting this object will have the side effect of adding or updating the correspondent entry in usdOspfMd5IntfKeyTable. If key given has less than 16 octets, such value will be appended with zeros to complete 16 octets. The zeros will appended to the right of the given key. Reading this object always results in an OCTET STRING of length zero.
                   usdOspfIfMd5AuthKeyId 1.3.6.1.4.1.4874.2.2.14.1.7.1.7 integer32 read-only
The MD5 authentication key ID. When setting this object, usdOspfIfMd5AuthKey must be specified on the same PDU.
           usdOspfVirtIfTable 1.3.6.1.4.1.4874.2.2.14.1.9 no-access
The Unisphere OSPF virtual interface table describes the OSPF-specific characteristics of virtual interfaces.
               usdOspfVirtIfEntry 1.3.6.1.4.1.4874.2.2.14.1.9.1 no-access
The OSPF virtual interface entry describes OSPF-specific characteristics of one virtual interface.
                   usdOspfVirtIfMd5AuthKey 1.3.6.1.4.1.4874.2.2.14.1.9.1.1 octet string read-only
The MD5 authentication key. When setting this object, the usdOspfVirtIfMd5AuthKeyId must be specified on the same PDU. For simple text authentication type, use ospfVirtIfAuthKey. Setting this object will have the side effect of adding or updating the correspondent entry in usdOspfMd5IntfKeyTable. If key given has less than 16 octets, such value will be appended with zeros to complete 16 octets. The zeros will appended to the right of the given key. Reading this object always results in an OCTET STRING of length zero.
                   usdOspfVirtIfMd5AuthKeyId 1.3.6.1.4.1.4874.2.2.14.1.9.1.2 integer32 read-only
The MD5 authentication key id. When setting this object, usdOspfVirtIfMd5AuthKey must be specified on the same psu.
           usdOspfNbrTable 1.3.6.1.4.1.4874.2.2.14.1.10 no-access
The Unisphere OSPF neighbor table describes the OSPF-specific characteristics of neighbors.
                 usdOspfNbrEntry 1.3.6.1.4.1.4874.2.2.14.1.10.1 no-access
The OSPF neighbor entry describes OSPF-specific characteristics of one neighbor.
                     usdOspfNbrLocalIpAddr 1.3.6.1.4.1.4874.2.2.14.1.10.1.1 ipaddress read-only
The local IP address on this OSPF circuit.
                     usdOspfNbrDR 1.3.6.1.4.1.4874.2.2.14.1.10.1.2 ipaddress read-only
The neighbor's idea of designated router.
                     usdOspfNbrBDR 1.3.6.1.4.1.4874.2.2.14.1.10.1.3 ipaddress read-only
The neighbor's idea of backup designated router.
           usdOspfSummImportTable 1.3.6.1.4.1.4874.2.2.14.1.15 no-access
The Unisphere OSPF summary import table describes the OSPF-specific characteristics of network aggregation into the OSPF autonomous system. With this table, the load of advertising many external routes can be reduced by specifying a range which includes some or all of the external routes.
                 usdOspfSummImportEntry 1.3.6.1.4.1.4874.2.2.14.1.15.1 no-access
The OSPF summary import entry describes OSPF-specific characteristics of one summary report.
                     usdOspfSummAggNet 1.3.6.1.4.1.4874.2.2.14.1.15.1.1 ipaddress read-only
The summary address for a range of addresses.
                     usdOspfSummAggMask 1.3.6.1.4.1.4874.2.2.14.1.15.1.2 ipaddress read-only
The subnet mask used for the summary route.
                     usdOspfSummAdminStat 1.3.6.1.4.1.4874.2.2.14.1.15.1.3 integer read-only
The admin status of this summary aggregation. Enumeration: 'disabled': 0, 'enabled': 1.
                     usdOspfSummRowStatus 1.3.6.1.4.1.4874.2.2.14.1.15.1.4 rowstatus read-only
This variable displays the status of the entry.
           usdOspfMd5IntfTable 1.3.6.1.4.1.4874.2.2.14.1.16 no-access
The Unisphere OSPF interface MD5 key table describes OSPF-specific characteristics of the MD5 authentication key for the OSPF interfaces. This table is not to be used for the simple password authentication.
                 usdOspfMd5IntfEntry 1.3.6.1.4.1.4874.2.2.14.1.16.1 no-access
The OSPF interface MD5 key entry describes OSPF-specific characteristics of one MD5 authentication's interface.
                     usdOspfMd5IntfKeyId 1.3.6.1.4.1.4874.2.2.14.1.16.1.1 integer32 read-only
The OSPF interface this key belongs to.
                     usdOspfMd5IntfKeyActive 1.3.6.1.4.1.4874.2.2.14.1.16.1.2 truthvalue read-only
Set this object to true(1) in order to have this key active.
                     usdOspfMd5IntfAuthKey 1.3.6.1.4.1.4874.2.2.14.1.16.1.3 octet string read-only
The MD5 authentication key. If key given has less than 16 octets, such value will be appended with zeros to complete 16 octets. The zeros will appended to the right of the given key. Reading this object always results in an OCTET STRING of length zero.
                     usdOspfMd5IntfRowStatus 1.3.6.1.4.1.4874.2.2.14.1.16.1.4 rowstatus read-only
This variable displays the status of the entry.
           usdOspfMd5VirtIntfTable 1.3.6.1.4.1.4874.2.2.14.1.17 no-access
The Unisphere OSPF interface MD5 key table describes OSPF-specific characteristics of the MD5 authentication key for the OSPF interfaces. This table is not to be used for the simple password authentication.
                 usdOspfMd5VirtIntfEntry 1.3.6.1.4.1.4874.2.2.14.1.17.1 no-access
The OSPF Interface MD5 Key entry describes OSPF-specific characteristics of one MD5 authentication's interface.
                     usdOspfMd5VirtIntfAreaId 1.3.6.1.4.1.4874.2.2.14.1.17.1.1 ipaddress read-only
The OSPF area ID this key belongs to.
                     usdOspfMd5VirtIntfNeighbor 1.3.6.1.4.1.4874.2.2.14.1.17.1.2 ipaddress read-only
The OSPF neightbor this key belongs to.
                     usdOspfMd5VirtIntfKeyId 1.3.6.1.4.1.4874.2.2.14.1.17.1.3 integer32 read-only
The OSPF virtual interface this key belongs to.
                     usdOspfMd5VirtIntfKeyActive 1.3.6.1.4.1.4874.2.2.14.1.17.1.4 truthvalue read-only
Set this object to true(1) in order to have this key active.
                     usdOspfMd5VirtIntfAuthKey 1.3.6.1.4.1.4874.2.2.14.1.17.1.5 octet string read-only
The MD5 authentication key. If key given has less than 16 octets, such value will be appended with zeros to complete 16 octets. The zeros will appended to the right of the given key. Reading this object always results in an OCTET STRING of length zero.
                     usdOspfMd5VirtIntfRowStatus 1.3.6.1.4.1.4874.2.2.14.1.17.1.6 rowstatus read-only
This variable displays the status of the entry.
           usdOspfNetworkRangeTable 1.3.6.1.4.1.4874.2.2.14.1.18 no-access
The Unisphere OSPF network range table describes the OSPF-specific characteristics of network ranges, encompassing one or multiple OSPF interfaces.
                 usdOspfNetworkRangeEntry 1.3.6.1.4.1.4874.2.2.14.1.18.1 no-access
The Unisphere OSPF network range entry describes OSPF-specific characteristics of one OSPF network range.
                     usdOspfNetRangeNet 1.3.6.1.4.1.4874.2.2.14.1.18.1.1 ipaddress read-only
The network range address.
                     usdOspfNetRangeMask 1.3.6.1.4.1.4874.2.2.14.1.18.1.2 ipaddress read-only
The subnet mask used for the network range. Unlike the mask used under the command line interface (CLI), this object is set in the non-inversed format (i.e. not a wild-card mask).
                     usdOspfNetRangeAreaId 1.3.6.1.4.1.4874.2.2.14.1.18.1.3 ipaddress read-only
The OSPF area ID this network range belongs to.
                     usdOspfNetRangeRowStatus 1.3.6.1.4.1.4874.2.2.14.1.18.1.4 rowstatus read-only
This variable displays the status of the entry.
       usdOspfConformance 1.3.6.1.4.1.4874.2.2.14.4
           usdOspfCompliances 1.3.6.1.4.1.4874.2.2.14.4.1
               usdOspfCompliance 1.3.6.1.4.1.4874.2.2.14.4.1.1
Obsolete compliance statement for entities which implement the Unisphere OSPF MIB. This statement became obsolete when usdOspfVpnRouteTag, usdOspfDomainId, usdOspfAreaTeCapable and usdOspfMplsTeRtrIdIfIndex were added to the basic group.
               usdOspfCompliance2 1.3.6.1.4.1.4874.2.2.14.4.1.2
The compliance statement for entities which implement the Unisphere OSPF MIB.
           usdOspfGroups 1.3.6.1.4.1.4874.2.2.14.4.2
               usdOspfBasicGroup 1.3.6.1.4.1.4874.2.2.14.4.2.1
Obsolete collection of objects for managing general OSPF capabilities in a Unisphere product. This group became obsolete when usdOspfVpnRouteTag, usdOspfDomainId, usdOspfAreaTeCapable and usdOspfMplsTeRtrIdIfIndex were added.
               usdOspfIfGroup 1.3.6.1.4.1.4874.2.2.14.4.2.2
A collection of objects which augments the standard MIB objects for managing OSPF Interface capabilities in a Unisphere product.
               usdOspfAreaGroup 1.3.6.1.4.1.4874.2.2.14.4.2.3
An object which augments the standard MIB objects for managing OSPF areas capabilities in a Unisphere product.
               usdOspfVirtIfGroup 1.3.6.1.4.1.4874.2.2.14.4.2.4
A collection of objects which augments the standard MIB objects for managing OSPF virtual interface capabilities in a Unisphere product.
               usdOspfNbrGroup 1.3.6.1.4.1.4874.2.2.14.4.2.5
A collection of objects which augments the standard MIB objects for managing OSPF neighbor capabilities in a Unisphere product.
               usdOspfSummImportGroup 1.3.6.1.4.1.4874.2.2.14.4.2.6
A collection of objects for managing OSPF summary report capabilities in a Unisphere product.
               usdOspfMd5IntfGroup 1.3.6.1.4.1.4874.2.2.14.4.2.7
A collection of objects for managing OSPF MD5 interfaces capabilities in a Unisphere product.
               usdOspfMd5VirtIntfGroup 1.3.6.1.4.1.4874.2.2.14.4.2.8
A collection of objects for managing OSPF MD5 virtual interfaces capabilities in a Unisphere product.
               usdOspfNetRangeGroup 1.3.6.1.4.1.4874.2.2.14.4.2.9
A collection of objects for managing OSPF network range capabilities in a Unisphere product.
               usdOspfBasicGroup2 1.3.6.1.4.1.4874.2.2.14.4.2.10
A collection of objects for managing general OSPF capabilities in a Unisphere product.