Unisphere-Data-ATM-MIB: View SNMP OID List / Download MIB

VENDOR: JUNIPER


 Home MIB: Unisphere-Data-ATM-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 usdAtmMIB 1.3.6.1.4.1.4874.2.2.8
The ATM MIB for the Unisphere Networks Inc. enterprise.
     usdAtmObjects 1.3.6.1.4.1.4874.2.2.8.1
         usdAtmIfLayer 1.3.6.1.4.1.4874.2.2.8.1.1
             usdAtmNextIfIndex 1.3.6.1.4.1.4874.2.2.8.1.1.1 usdnextifindex read-only
Coordinate ifIndex value allocation for entries in usdAtmIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
             usdAtmIfTable 1.3.6.1.4.1.4874.2.2.8.1.1.2 no-access
This table contains entries for ATM interfaces present in the system.
                 usdAtmIfEntry 1.3.6.1.4.1.4874.2.2.8.1.1.2.1 no-access
Each entry describes the characteristics of an ATM interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/usdIfTable.
                     usdAtmIfIndex 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.1 interfaceindex no-access
The ifIndex of the ATM interface. When creating entries in this table, suitable values for this object are determined by reading usdAtmNextIfIndex.
                     usdAtmIfRowStatus 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.2 rowstatus read-only
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdAtmIfRowStatus usdAtmIfLowerIfIndex In addition, when creating an entry the following condition must hold: A value for usdAtmIfIndex must have been determined previously, by reading usdAtmNextIfIndex. A corresponding entry in ifTable/ifXTable/usdIfTable is created or destroyed as a result of creating/destroying an entry in this table.
                     usdAtmIfLowerIfIndex 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.3 interfaceindexorzero read-only
The ifIndex of an interface over which this ATM interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.
                     usdAtmIfIlmiVpi 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.4 atmvpidentifier read-only
The VPI of the ILMI of a major ATM interface.
                     usdAtmIfIlmiVci 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.5 atmvcidentifier read-only
The VCI of the ILMI of a major ATM interface.
                     usdAtmIfIlmiVcd 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.6 integer32 read-only
An integer identifier for the ILMI, used in conjunction with the command-line interface. The value must be unique among VCs configured on the same ATM interface.
                     usdAtmIfIlmiPollFrequency 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.7 integer32 read-only
The amount of time in seconds between successive transmissions of ILMI messages on this interface for the purpose of detecting loss of ILMI connectivity. The distinguished value zero disables ILMI connectivity procedures on this interface.
                     usdAtmIfIlmiAdminState 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.8 integer read-only
The administrative status of ILMI in the ATM interface. Enumeration: 'disabled': 0, 'enabled': 1.
                     usdAtmIfUniVersion 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.9 integer read-only
Use to specify the User Network Interface (UNI) the router should use when ILMI link auto determination is unsuccesful or ILMI is disabled. Enumeration: 'version4Dot0': 2, 'version3Dot0': 0, 'version3Dot1': 1.
                     usdAtmIfOamCellRxAdminState 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.10 integer read-only
Use to specify the OAM Cell Receive Administrative state on this interface. Enumeration: 'oamCellAdminStateDisabled': 0, 'oamCellAdminStateEnabled': 1.
                     usdAtmIfInCells 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.11 counter64 read-only
The total number of cells received on this major interface.
                     usdAtmIfOutCells 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.12 counter64 read-only
The total number of cells transmitted on this major interface.
                     usdAtmIfVcCount 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.13 integer read-only
The total number of circuits configured on this interface.
                     usdAtmIfMapGroup 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.14 usdatmnbmamapnameornull read-only
The NBMA map group this interface is associated with.
                     usdAtmIfCacAdminState 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.15 usdenable read-only
The administrative staus of CAC on this ATM major interface.
                     usdAtmIfCacUbrWeight 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.16 integer32 read-only
The bandwidth associated with every UBR and UBR with PCR connection configured on the ATM major interface. This value is used for CAC computation. The units are kilo-bits per second (kbps).
                     usdAtmIfCacSubscriptionBandwidth 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.17 integer32 read-only
The subscribed bandwidth of the ATM major interface. If this value is not specified or set to 0, the effective port bandwidth is used. When a Get operation is performed the current effective bandwidth is returned. The units are kilo-bits per second (kbps).
                     usdAtmIfCacAvailableBandwidth 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.18 integer32 read-only
The available bandwidth of the ATM major interface. As connections are added or deleted on the interface, this value is updated. The units are kilo-bits per second (kbps).
                     usdAtmIfOamCellFilter 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.23 integer read-only
The type of OAM cells to discard when usdAtmIfOamCellRxAdminState is set to oamCellAdminStateDisabled. The value oamCellFilterAlarm discards received OAM AIS and RDI cells. The value oamCellFilterAll discards all received OAM cells. Note that when usdAtmIfOamCellRxAdminState is set to oamCellAdminStateEnabled, this object has no effect. Enumeration: 'oamCellFilterAll': 0, 'oamCellFilterAlarm': 1.
                     usdAtmIfCacUsedBandwidthUpper 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.24 unsigned32 read-only
The most significant 32 bits of the CAC used bandwidth on the ATM major interface. The least significant 32 bits of the CAC used bandwidth are specified by usdAtmIfCacUsedBandwidthLower.
                     usdAtmIfCacUsedBandwidthLower 1.3.6.1.4.1.4874.2.2.8.1.1.2.1.25 unsigned32 read-only
The least significant 32 bits of the CAC used bandwidth on the ATM major interface. The most significant 32 bits of the CAC used bandwidth are specified by usdAtmIfCacUsedBandwidthUpper.
             usdAtmPvcStatisticsTable 1.3.6.1.4.1.4874.2.2.8.1.1.3 no-access
This table contains statistics for PVC entries.
                 usdAtmPvcStatisticsEntry 1.3.6.1.4.1.4874.2.2.8.1.1.3.1 no-access
Each entry provides statistics on an ATM PVC.
                     usdAtmPvcStatsIfIndex 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.1 interfaceindex no-access
The ifIndex of the ATM interface.
                     usdAtmPvcStatsVpi 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.2 atmvpidentifier no-access
The VPI of the ATM VCC used by this ATM interface and PVC.
                     usdAtmPvcStatsVci 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.3 atmvcidentifier no-access
The VCI of the ATM VCC used by this ATM interface and PVC.
                     usdAtmPvcStatsInCells 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.4 counter64 read-only
Received cells.
                     usdAtmPvcStatsInCellOctets 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.5 counter64 read-only
Received cells octets.
                     usdAtmPvcStatsInPackets 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.6 counter64 read-only
Received AAL PDUs.
                     usdAtmPvcStatsInPacketOctets 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.7 counter64 read-only
Received AAL PDU octets.
                     usdAtmPvcStatsOutCells 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.8 counter64 read-only
Transmitted cells.
                     usdAtmPvcStatsOutCellOctets 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.9 counter64 read-only
Transmitted cell octets.
                     usdAtmPvcStatsOutPackets 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.10 counter64 read-only
Transmitted AAL PDUs.
                     usdAtmPvcStatsOutPacketOctets 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.11 counter64 read-only
Transmitted AAL PDU octets.
                     usdAtmPvcStatsInCellErrors 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.12 counter32 read-only
Received cells dropped due to errors.
                     usdAtmPvcStatsinPacketErrors 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.13 counter32 read-only
Received packets dropped due to errors.
                     usdAtmPvcStatsOutCellErrors 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.14 counter32 read-only
Cells not transmitted due to errors.
                     usdAtmPvcStatsOutPacketErrors 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.15 counter32 read-only
Packets not transmitted due to errors.
                     usdAtmPvcStatsInPacketDiscards 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.16 counter32 read-only
Received packets w/o errors discarded.
                     usdAtmPvcStatsInPacketOctetDiscards 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.17 counter32 read-only
Received bytes w/o errors discarded.
                     usdAtmPvcStatsInPacketUnknownProtocol 1.3.6.1.4.1.4874.2.2.8.1.1.3.1.18 counter32 read-only
Received packets that are discarded because the interface can not discern or is not configured to support this protocol.
             usdAtmVpTunnelTable 1.3.6.1.4.1.4874.2.2.8.1.1.4 no-access
This table contains entries for ATM VP Tunnels present in the system.
                 usdAtmVpTunnelEntry 1.3.6.1.4.1.4874.2.2.8.1.1.4.1 no-access
Each entry describes the characteristics of an ATM VP Tunnel.
                     usdAtmVpTunnelIfIndex 1.3.6.1.4.1.4874.2.2.8.1.1.4.1.1 interfaceindex no-access
The ifIndex of the ATM interface. The value of this object is the same as the usdAtmIfIndex object in the usdAtmIfTable. Entries in this table cannot be created unless the underlying ATM interface entry is created first in the usdAtmIfTable.
                     usdAtmVpTunnelVpi 1.3.6.1.4.1.4874.2.2.8.1.1.4.1.2 atmvpidentifier no-access
The VPI value for this VP tunnel entry.
                     usdAtmVpTunnelKbps 1.3.6.1.4.1.4874.2.2.8.1.1.4.1.3 integer32 read-only
The tunnel rate in kilobits per second (kbps) for this entry.
                     usdAtmVpTunnelRowStatus 1.3.6.1.4.1.4874.2.2.8.1.1.4.1.4 rowstatus read-only
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdAtmVpTunnelRowStatus usdAtmVpTunnelKbps In addition, when creating an entry the following condition must hold: A correponding usdAtmVpTunnelIfIndex value must have been created in the usdAtmIfTable previously.
                     usdAtmVpTunnelServiceCategory 1.3.6.1.4.1.4874.2.2.8.1.1.4.1.5 integer read-only
The ATM service category for the tunnel. Enumeration: 'nrtVbr': 1, 'cbr': 2.
             usdAtmIfCapabilityTable 1.3.6.1.4.1.4874.2.2.8.1.1.5 no-access
This table contains entries for ATM interfaces present in the system.
                 usdAtmIfCapabilityEntry 1.3.6.1.4.1.4874.2.2.8.1.1.5.1 no-access
Each entry describes the capabilities of an ATM interface. A management client can use this table to determine differences in the configurable level of support across entries in this table.
                     usdAtmIfCapabilityIndex 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.1 interfaceindex no-access
The ifIndex of the ATM interface. The value of this object is the same as usdAtmIfIndex in the usdAtmIfTable.
                     usdAtmIfCapabilityTrafficShaping 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.2 truthvalue read-only
Indicates whether traffic shaping is supported on this interface; true(1) indicates that it is, false(2) indicates that it is not.
                     usdAtmIfCapabilityOam 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.3 truthvalue read-only
Indicates whether OAM is supported on this interface; true(1) indicates that it is, false(2) indicates that it is not.
                     usdAtmIfCapabilityDefaultVcPerVp 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.4 integer read-only
The default number of VCs per VP for this interface.
                     usdAtmIfCapabilityNumVpiVciBits 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.5 integer read-only
The total range of bits used for constructing VPI/VCI identifiers for this interface.
                     usdAtmIfCapabilityMaxVcd 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.6 integer32 read-only
The maximum configurable value for a VCD on this interface.
                     usdAtmIfCapabilityMaxVpi 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.7 atmvpidentifier read-only
The maximum configurable value for a VPI on this interface.
                     usdAtmIfCapabilityMaxVci 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.8 atmvcidentifier read-only
The maximum configurable value for a VCI on this interface.
                     usdAtmIfCapabilityOamCellFilter 1.3.6.1.4.1.4874.2.2.8.1.1.5.1.9 truthvalue read-only
Indicates whether OAM cell filter is supported on this interface; true(1) indicates that it is, false(2) indicates that it is not.
             usdAtmIfSvcSignallingTable 1.3.6.1.4.1.4874.2.2.8.1.1.6 no-access
This table contains entries for extending the usdAtmIfTable for configuring signalling information for switched virtual connection (SVC).
                 usdAtmIfSvcSignallingEntry 1.3.6.1.4.1.4874.2.2.8.1.1.6.1 no-access
Each entry provides configuration parameters for ATM signalling on the interface.
                     usdAtmIfSvcSignallingVpi 1.3.6.1.4.1.4874.2.2.8.1.1.6.1.1 atmvpidentifier read-write
The VPI identifier of the ATM circuit used for signalling for this interface.
                     usdAtmIfSvcSignallingVci 1.3.6.1.4.1.4874.2.2.8.1.1.6.1.2 atmvcidentifier read-write
The VCI identifier of the ATM circuit used for signalling for this interface.
                     usdAtmIfSvcSignallingVcd 1.3.6.1.4.1.4874.2.2.8.1.1.6.1.3 atmvcidentifier read-write
The VCI identifier of the ATM circuit used for signalling for this interface.
                     usdAtmIfSvcSignallingAdminStatus 1.3.6.1.4.1.4874.2.2.8.1.1.6.1.4 atmvorxadminstatus read-write
The administrative status of signalling in the ATM interface.
         usdAtmAal5IfLayer 1.3.6.1.4.1.4874.2.2.8.1.2
             usdAtmAal5NextIfIndex 1.3.6.1.4.1.4874.2.2.8.1.2.1 usdnextifindex read-only
Coordinate ifIndex value allocation for entries in usdAtmAal5IfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
             usdAtmAal5IfTable 1.3.6.1.4.1.4874.2.2.8.1.2.2 no-access
This table contains entries for ATM AAL5 interfaces present in the system.
                 usdAtmAal5IfEntry 1.3.6.1.4.1.4874.2.2.8.1.2.2.1 no-access
Each entry describes the characteristics of an ATM AAL5 interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/usdIfTable.
                     usdAtmAal5IfIndex 1.3.6.1.4.1.4874.2.2.8.1.2.2.1.1 interfaceindex no-access
The ifIndex of the ATM AAL5 interface. When creating entries in this table, suitable values for this object are determined by reading usdAtmAal5NextIfIndex.
                     usdAtmAal5IfRowStatus 1.3.6.1.4.1.4874.2.2.8.1.2.2.1.2 rowstatus read-only
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdAtmAal5IfRowStatus usdAtmAal5IfLowerIfIndex In addition, when creating an entry the following condition must hold: A value for usdAtmAal5IfIndex must have been determined previously, by reading usdAtmAal5NextIfIndex. A corresponding entry in ifTable/ifXTable/usdIfTable is created or destroyed as a result of creating/destroying an entry in this table.
                     usdAtmAal5IfLowerIfIndex 1.3.6.1.4.1.4874.2.2.8.1.2.2.1.3 interfaceindexorzero read-only
The ifIndex of an ATM interface over which this ATM AAL5 interface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.
         usdAtmSubIfLayer 1.3.6.1.4.1.4874.2.2.8.1.3
             usdAtmSubIfNextIfIndex 1.3.6.1.4.1.4874.2.2.8.1.3.1 usdnextifindex read-only
Coordinate ifIndex value allocation for entries in usdAtmSubIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry in the associated interface table; or zero, if no valid ifIndex value is available. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously.
             usdAtmSubIfTable 1.3.6.1.4.1.4874.2.2.8.1.3.2 no-access
This table contains entries for ATM Subinterfaces present in the system.
                 usdAtmSubIfEntry 1.3.6.1.4.1.4874.2.2.8.1.3.2.1 no-access
Each entry describes the characteristics of an ATM Subinterface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTable/usdIfTable.
                     usdAtmSubIfIndex 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.1 interfaceindex no-access
The ifIndex of the ATM Subinterface. When creating entries in this table, suitable values for this object are determined by reading usdAtmSubNextIfIndex.
                     usdAtmSubIfRowStatus 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.2 rowstatus read-only
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdAtmSubIfRowStatus usdAtmSubIfLowerIndex In addition, when creating an entry the following condition must hold: A value for usdAtmSubIfIndex must have been determined previously, by reading usdAtmSubIfNextIfIndex. A corresponding entry in ifTable/ifXTable/usdIfTable is created or destroyed as a result of creating/destroying an entry in this table.
                     usdAtmSubIfDistinguisher 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.3 integer32 read-only
An integer identifier for the subinterface, used in conjunction with the command-line interface. It is provided here for cross-reference purposes only. The value must be unique among subinterfaces configured on the same underlying ATM adaptation layer. The upper bound for the value is further constrained to be identical with the maximum number of subinterfaces supported by the lower interface. If this object is not configured, a value will be allocated internally and can be queried after table entry creation has succeeded.
                     usdAtmSubIfLowerIfIndex 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.4 interfaceindexorzero read-only
The ifIndex of an ATM AAL5 interface over which this ATM subinterface is to be layered. A value of zero indicates no layering. An implementation may choose to require that a nonzero value be configured at entry creation.
                     usdAtmSubIfNbma 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.5 truthvalue read-only
The NBMA administrative setting. Setting this value of this object to true(1) will enable multipoint access on this interface. Setting the value to false(2), will enable point to point access on this interface.
                     usdAtmSubIfAddress 1.3.6.1.4.1.4874.2.2.8.1.3.2.1.6 atmaddr read-only
Specifies the local ATM NSAP address of the circuit. A GET operation returns a full 20-octet NSAP. A SET operation only requires 7 octets, since the prefix can be implied.
             usdAtmSubIfVccTable 1.3.6.1.4.1.4874.2.2.8.1.3.3 no-access
This table contains entries for ATM VCCs configured on ATM subinterfaces present in the system. An implementation may constrain the number of VCCs permitted to be configured per ATM Subinterface; in particular, an implementation may restrict each ATM Subinterface to have a single VCC. Attributes in this entry can only be configured at entry creation, and remain fixed for the lifetime of the entry.
                 usdAtmSubIfVccEntry 1.3.6.1.4.1.4874.2.2.8.1.3.3.1 no-access
Each entry describes the characteristics of an ATM subinterface VCC.
                     usdAtmSubIfVccVpi 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.1 atmvpidentifier no-access
The VPI of the ATM VCC used by this subinterface.
                     usdAtmSubIfVccVci 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.2 atmvcidentifier no-access
The VCI of the ATM VCC used by this subinterface.
                     usdAtmSubIfVccRowStatus 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.3 rowstatus read-only
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy To create an entry in this table, the following entry objects MUST be explicitly configured: usdAtmSubIfVccRowStatus In addition, when creating an entry the following conditions must hold: The ATM Subinterface identified by usdAtmSubIfIndex must exist. A positive value configured for usdAtmSubIfVccVcd must not already be assigned to an existing VCC. For each value of usdAtmSubIfVccServiceCategory, additional dependent objects in the entry require configuration as identified here: usdAtmSubIfVccServiceCategory Requires configuration of: ------------------------------------------------------------ ubr ubrPcr usdAtmSubIfVccPcr nrtVbr usdAtmSubIfVccPcr usdAtmSubIfVccScr usdAtmSubIfVccMbs cbr usdAtmSubIfVccPcr rtVbr usdAtmSubIfVccPcr usdAtmSubIfVccScr usdAtmSubIfVccMbs ------------------------------------------------------------ Attributes in this entry can only be configured at entry creation, and remain fixed for the lifetime of the entry.
                     usdAtmSubIfVccVcd 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.4 integer32 read-only
An integer identifier for the circuit, used in conjunction with the command-line interface. It is provided here for cross-reference purposes only. The value must be unique among VCCs configured on the same underlying ATM interface. If this object is not configured, or is configured with a value of zero, a value will be allocated internally and can be queried after table entry creation has succeeded.
                     usdAtmSubIfVccType 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.5 integer read-only
Specifies the encapsulation used by the circuit to carry IP datagrams. Encapsulations are as specified in RFC1483 Multiprotocol Interconnect over ATM. 'autoconfig' will recognize both VcMux and LLC formats. Enumeration: 'rfc1483VcMux': 0, 'rfc1483Llc': 1, 'autoconfig': 2.
                     usdAtmSubIfVccServiceCategory 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.6 integer read-only
Service category for this circuit: ubr Unspecified Bit Rate (best effort). ubrPcr Unspecified Bit Rate with Peak Cell Rate limit. nrtVbr Non-RealTime Variable Bit Rate. cbr Constant Bit Rate. rtVbr Realtime Variable Bit Rate. Enumeration: 'nrtVbr': 2, 'cbr': 3, 'ubrPcr': 1, 'ubr': 0, 'rtVbr': 4.
                     usdAtmSubIfVccPcr 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.7 integer32 read-only
Peak Cell Rate, in kilobits per second (kbps), of this circuit. This parameter is only required when usdAtmSubIfVccServiceCategory is configured to have one of the following values: ubrPcr nrtVbr cbr rtVbr
                     usdAtmSubIfVccScr 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.8 integer32 read-only
Sustained Cell Rate, in kilobits per second (kbps), of this circuit. This parameter is only required when usdAtmSubIfVccServiceCategory is configured to have the following value: nrtVbr rtVbr
                     usdAtmSubIfVccMbs 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.9 integer32 read-only
Maximum Burst Size, in cells, of this circuit. This parameter is only required when usdAtmSubIfVccServiceCategory is configured to have the following value: nrtVbr rtVbr
                     usdAtmSubIfInverseArp 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.10 truthvalue read-only
Enables the inverse ARP protocol on this VCC; true(1) enables the protocol, false(2) disables it.
                     usdAtmSubIfInverseArpRefresh 1.3.6.1.4.1.4874.2.2.8.1.3.3.1.11 integer32 read-only
The refresh rate in minutes between inverse ARP protocol messages.
             usdAtmCircuitOamTable 1.3.6.1.4.1.4874.2.2.8.1.3.4 no-access
This table contains circuit OAM data for a PVC.
                 usdAtmCircuitOamEntry 1.3.6.1.4.1.4874.2.2.8.1.3.4.1 no-access
Each entry provides OAM data on an ATM PVC.
                     usdAtmCircuitOamIfIndex 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.1 interfaceindex no-access
The ifIndex of the ATM subinterface.
                     usdAtmCircuitOamVpi 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.2 atmvpidentifier no-access
The VPI of the ATM VCC used by this ATM interface and PVC.
                     usdAtmCircuitOamVci 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.3 atmvcidentifier no-access
The VCI of the ATM VCC used by this ATM interface and PVC.
                     usdAtmCircuitOamAdminStatus 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.4 integer read-write
The administrative state of OAM for the interface identified by this entry. Enumeration: 'oamAdminStateDisabled': 1, 'oamAdminStateEnabled': 2.
                     usdAtmCircuitOamLoopbackOperStatus 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.5 integer read-only
The operational status of OAM for the interface identified by this entry. oamOperStatusNotSupported(0) - OAM not supported on this interface oamOperStatusDisabled(1) - VC integrity disabled oamOperStatusSent(2) - Loopback sent, awaiting response oamOperStatusReceived(3) - Loopback response received, awaiting frequency oamOperStatusFailed(4) - Loopback response not received, or invalid response received Enumeration: 'oamOperStatusNotSupported': 0, 'oamOperStatusDisabled': 1, 'oamOperStatusReceived': 3, 'oamOperStatusSent': 2, 'oamOperStatusFailed': 4.
                     usdAtmCircuitVcOamOperStatus 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.6 integer read-only
The OAM VC operational status of this entry. oamVcOperStateAisState(0) - AIS cell received or underlying physical layer reporting transmission path AIS oamVcOperStateRdiState(1) - RDI cell received oamVcOperStateDownRetry(2) - OAM loopback failed, using retry frequency to verify that the VC is really down oamVcOperStateUpRetry(3) - OAM loopback successful, using retry frequency to verify that the VC is really up oamVcOperStateUp(4) - OAM loopback successful after up retry verification oamVcOperStateDown(5) - OAM loopback failed after down retry verification oamVcOperStateNotManaged(6)- No verification via loopback cells being performed. Enumeration: 'oamVcOperStateDownRetry': 2, 'oamVcOperStateDown': 5, 'oamVcOperStateNotManaged': 6, 'oamVcOperStateUp': 4, 'oamVcOperStateUpRetry': 3, 'oamVcOperStateAisState': 0, 'oamVcOperStateRdiState': 1.
                     usdAtmCircuitOamLoopbackFrequency 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.7 integer32 read-write
The OAM loopback frequency for the interface identified by this entry.
                     usdAtmCircuitInOamF5Cells 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.8 counter32 read-only
Received OAM F5 cells.
                     usdAtmCircuitInOamCellsDropped 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.9 counter32 read-only
Received OAM cells that were dropped.
                     usdAtmCircuitOutOamF5Cells 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.10 counter32 read-only
Transmitted OAM F5 cells.
                     usdAtmCircuitInOamF5EndToEndLoopbackCells 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.11 counter32 read-only
Received OAM F5 end-to-end loopback cells.
                     usdAtmCircuitInOamF5SegmentLoopbackCells 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.12 counter32 read-only
Received OAM F5 segment loopback cells.
                     usdAtmCircuitInOamF5AisCells 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.13 counter32 read-only
Received OAM F5 AIS cells.
                     usdAtmCircuitInOamF5RdiCells 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.14 counter32 read-only
Received OAM F5 RDI cells.
                     usdAtmCircuitOutOamF5EndToEndLoopbackCells 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.15 counter32 read-only
Transmitted OAM F5 end-to-end loopback cells.
                     usdAtmCircuitOutOamF5SegmentLoopbackCells 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.16 counter32 read-only
Transmitted OAM F5 segment loopback cells.
                     usdAtmCircuitOutOamF5RdiCells 1.3.6.1.4.1.4874.2.2.8.1.3.4.1.17 counter32 read-only
Transmitted OAM F5 RDI cells.
             usdAtmSubIfVccTrafficShapingTable 1.3.6.1.4.1.4874.2.2.8.1.3.5 no-access
This table contains entries for traffic shaping of ATM VCCs configured on ATM subinterfaces present in the system. This table augments the usdAtmSubIfVccTable only for VCCs that support traffic shapping. Attributes in this entry can only be configured at entry creation, and remain fixed for the lifetime of the entry.
                 usdAtmSubIfVccTrafficShapingEntry 1.3.6.1.4.1.4874.2.2.8.1.3.5.1 no-access
Each entry describes the traffic shping characteristics of an ATM subinterface VCC.
                     usdAtmSubIfVccTrafficShapingCdvt 1.3.6.1.4.1.4874.2.2.8.1.3.5.1.1 unsigned32 read-only
The network cell delay variation tolerance (CDVT) in tenths of a microsecond.
                     usdAtmSubIfVccTrafficShapingClp0 1.3.6.1.4.1.4874.2.2.8.1.3.5.1.2 truthvalue read-only
Specifies whether or not only CLP0 cells are to be policed according to the traffic contract. CLP1 cells are forwarded on a best-effort basis CLP-significant model for (VBR.2, VBR.3 conformance). Applicable only for VBR circuits.
                     usdAtmSubIfVccTrafficShapingTagging 1.3.6.1.4.1.4874.2.2.8.1.3.5.1.3 truthvalue read-only
Specifies whether or not CLP0 cells should be tagged for SCR policing (VBR.3 conformance). Applicable only for VBR circuits.
                     usdAtmSubIfVccTrafficShapingPoliceObserve 1.3.6.1.4.1.4874.2.2.8.1.3.5.1.4 truthvalue read-only
Specifies whether of not no policing action is to be taken (note the double negative; if true(1) then no policing action will be taken; if false(2) then policing action will be taken). Regardless of the state of this object, all counters will be incremented.
                     usdAtmSubIfVccTrafficShapingPacketShaping 1.3.6.1.4.1.4874.2.2.8.1.3.5.1.5 truthvalue read-only
Specifies whether of not to shape output traffic on a packet boundary.
             usdAtmSubIfSvcConfigTable 1.3.6.1.4.1.4874.2.2.8.1.3.6 no-access
This table contains entries for extending the usdAtmSubIfTable to configure switched virtual connection (SVC)on the subinterfaces.
                 usdAtmSubIfSvcConfigEntry 1.3.6.1.4.1.4874.2.2.8.1.3.6.1 no-access
Each entry provides configuration parameters for an ATM SVC on the subinterface.
                     usdAtmSubIfSvcRowStatus 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.1 rowstatus read-only
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy
                     usdAtmSubIfSvcConfigDestAtmAddress 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.2 atmaddr read-only
Specifies the destination ATM NSAP address of the circuit.
                     usdAtmSubIfSvcConfigCircuitType 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.3 integer read-only
Specifies the encapsulation used by the circuit to carry IP datagrams. Encapsulations are as specified in RFC1483 Multiprotocol Interconnect over ATM. Enumeration: 'rfc1483VcMux': 0, 'rfc1483Llc': 1.
                     usdAtmSubIfSvcConfigServiceCategory 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.4 integer read-only
Service category for this circuit: ubr Unspecified Bit Rate (best effort). ubrPcr Unspecified Bit Rate with Peak Cell Rate limit. nrtVbr Non-RealTime Variable Bit Rate. cbr Constant Bit Rate. rtVbr Realtime Variable Bit Rate. Enumeration: 'nrtVbr': 2, 'cbr': 3, 'ubrPcr': 1, 'ubr': 0, 'rtVbr': 4.
                     usdAtmSubIfSvcConfigPcr 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.5 unsigned32 read-only
Peak Cell Rate, in kilo-bits per second (kbps), of this circuit.
                     usdAtmSubIfSvcConfigScr 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.6 unsigned32 read-only
Sustained Cell Rate, in kilo-bits per second (kbps), of this circuit.
                     usdAtmSubIfSvcConfigMbs 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.7 unsigned32 read-only
Maximum Burst Size, in cells, of this circuit.
                     usdAtmSubIfSvcConfigCdvt 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.8 unsigned32 read-only
Specify the network Cell Delay Variation Tolerance.
                     usdAtmSubIfSvcConfigClp0 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.9 truthvalue read-only
Specify that only CLP0 cells are to be policed according to the traffic contract. CLP1 cells are forwarded on a best-effort basis CLP-significant model for (VBR.2, VBR.3 conformance).
                     usdAtmSubIfSvcConfigTagging 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.10 truthvalue read-only
Specify that CLP0 cells should be tagged for SCR policing (VBR.3 conformance).
                     usdAtmSubIfSvcConfigObserve 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.11 truthvalue read-only
Specify that no policing action is to be taken; only counters are incremented.
                     usdAtmSubIfSvcConfigPacketDiscard 1.3.6.1.4.1.4874.2.2.8.1.3.6.1.12 truthvalue read-only
Enable early packet Discard for this circuit.
         usdAtmNbma 1.3.6.1.4.1.4874.2.2.8.1.4
             usdAtmNbmaMapTable 1.3.6.1.4.1.4874.2.2.8.1.4.1 no-access
This table contains entries for ATM NBMA maps.
                 usdAtmNbmaMapEntry 1.3.6.1.4.1.4874.2.2.8.1.4.1.1 no-access
Each entry describes the characteristics of an ATM NBMA map.
                     usdAtmNbmaMapName 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.1 usdatmnbmamapname no-access
The NBMA map name.
                     usdAtmNbmaMapVcd 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.2 integer32 no-access
An integer identifier for the ATM circuit, used in conjunction with the command-line interface. The value must be unique among VCs configured on the same ATM interface.
                     usdAtmNbmaMapIpAddress 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.3 ipaddress read-only
The IP address associated with this entry.
                     usdAtmNbmaMapVpi 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.4 atmvpidentifier read-only
The VPI identifier of the ATM circuit.
                     usdAtmNbmaMapVci 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.5 atmvcidentifier read-only
The VCI identifier of the ATM circuit.
                     usdAtmNbmaMapIfIndex 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.6 interfaceindexorzero read-only
The ifIndex of the ATM major interface associated with this entry. The value of this object will be zero when the map is not applied to an interface.
                     usdAtmNbmaMapBroadcast 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.7 truthvalue read-only
The broadcast enable/disable setting for this entry. The value true(1) enable broadcast support; disable(2) disabled broadcast support for this entry.
                     usdAtmNbmaMapRowStatus 1.3.6.1.4.1.4874.2.2.8.1.4.1.1.8 rowstatus read-only
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy Additional notes to aid the network manager: - NBMA maps are not supported on dynamic interface. - NBMA maps can only be applied to a single major ATM interface at a time. - NBMA maps cannot be deleted unless the map is removed from the ATM interface (usdAtmNbmaMapIfIndex = 0). - The values of usdAtmNbmaMapVpi, usdAtmNbmaMapVci and usdAtmNbmaMapIfIndex are zero until the map is applied to a major ATM interface. - To create an entry in this table, the following objects must be present in the set PDU: usdAtmNbmaMapIpAddress usdAtmNbmaMapBroadcast usdAtmNbmaMapRowStatus - Once created, only the following objects can be modified: usdAtmNbmaMapBroadcast
             usdAtmNbmaMapListTable 1.3.6.1.4.1.4874.2.2.8.1.4.2 no-access
This table contains entries for ATM NBMA map lists.
                 usdAtmNbmaMapListEntry 1.3.6.1.4.1.4874.2.2.8.1.4.2.1 no-access
Each entry describes the characteristics of an ATM NBMA map.
                     usdAtmNbmaMapListName 1.3.6.1.4.1.4874.2.2.8.1.4.2.1.1 usdatmnbmamapname no-access
The NBMA Map List name.
                     usdAtmNbmaMapListRowStatus 1.3.6.1.4.1.4874.2.2.8.1.4.2.1.2 rowstatus read-only
Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndGo destroy
         usdAtmPing 1.3.6.1.4.1.4874.2.2.8.1.5
             usdAtmPingTestTypes 1.3.6.1.4.1.4874.2.2.8.1.5.1
                 usdAtmPingTestOamSeg 1.3.6.1.4.1.4874.2.2.8.1.5.1.1
This identifies an OAM Ping (multiple loopbacks) Test on a VPL, VPC, VCL, or VCC termination point, using segment OAM cells. The test type must have appended to it a code that uniquely identifies an intermediate point responsible for looping back each cell. If this is absent, the loopbacks are performed at the end of the segment or connection. E.g., the OID { usdAtmPingTestOamSeg 5 } identifies that the loopbacks should be performed at the intermediate point labeled 5.
                 usdAtmPingTestOamE2E 1.3.6.1.4.1.4874.2.2.8.1.5.1.2
This identifies an OAM Ping (multiple loopbacks) Test on a VPL, VPC, VCL, or VCC termination point, using end-to-end OAM cells.
             usdAtmVpPingTable 1.3.6.1.4.1.4874.2.2.8.1.5.2 no-access
This table contains entries for extending the ATM-FORUM-SNMP-M4-MIB atmM4VpTestTable to do ping (multiple loopback) type testing.
                 usdAtmVpPingEntry 1.3.6.1.4.1.4874.2.2.8.1.5.2.1 no-access
Each entry describes the characteristics, status and results of the most recent ATM ping test.
                     usdAtmVpPingProbeCount 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.1 unsigned32 read-write
The number of ping probes (OAM cells) to be sent to complete the test.
                     usdAtmVpPingTimeOut 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.2 unsigned32 read-write
Specifies the time-out value, in seconds, for a remote ping operation.
                     usdAtmVpPingCtlTrapGeneration 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.3 bits read-write
The value of this object determines when and if to generate a notification for this entry: testCompletion(0) - Generate a usdPingTestCompleted notification. The value of this object defaults to zero, indicating that no notification has been selected. Bits: 'testCompletion': 0.
                     usdAtmVpPingSentProbes 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.4 unsigned32 read-only
The number of ping probes (OAM cells) that have been sent thus far for this test. The value of this object MUST be set to zero when the atmfM4VpTestStatus object transitions from notInUse(0) to inUse(1).
                     usdAtmVpPingProbeResponses 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.5 unsigned32 read-only
The number of ping responses that have been received thus far for this test. The value of this object MUST be set to zero when the atmfM4VpTestStatus object transitions from notInUse(0) to inUse(1).
                     usdAtmVpPingStartTime 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.6 timestamp read-only
The time (sysUpTime) when the test started.
                     usdAtmVpPingMinRtt 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.7 unsigned32 read-only
The shortest round-trip-time (RTT) for the pings that have received responses. The value of this object MUST be set to zero when the atmfM4VpTestStatus object transitions from notInUse(0) to inUse(1). A value of zero for this object implies that no ping responses have been received for the current test.
                     usdAtmVpPingMaxRtt 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.8 unsigned32 read-only
The longest round-trip-time (RTT) for the pings that have received responses. The value of this object MUST be set to zero when the atmfM4VpTestStatus object transitions from notInUse(0) to inUse(1). A value of zero for this object implies that no ping responses have been received for the current test.
                     usdAtmVpPingAverageRtt 1.3.6.1.4.1.4874.2.2.8.1.5.2.1.9 unsigned32 read-only
The average round-trip-time (RTT) for all the pings that have received responses. The value of this object MUST be set to zero when the atmfM4VpTestStatus object transitions from notInUse(0) to inUse(1). A value of zero for this object implies that no ping responses have been received for the current test.
             usdAtmVcPingTable 1.3.6.1.4.1.4874.2.2.8.1.5.3 no-access
This table contains entries for extending the ATM-FORUM-SNMP-M4-MIB atmM4VcTestTable to do ping (multiple loopback) type testing.
                 usdAtmVcPingEntry 1.3.6.1.4.1.4874.2.2.8.1.5.3.1 no-access
Each entry describes the characteristics, status and results of the most recent ATM ping test.
                     usdAtmVcPingProbeCount 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.1 unsigned32 read-write
The number of ping probes (OAM cells) to be sent to complete the test.
                     usdAtmVcPingTimeOut 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.2 unsigned32 read-write
Specifies the time-out value, in seconds, for a remote ping operation.
                     usdAtmVcPingCtlTrapGeneration 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.3 bits read-write
The value of this object determines when and if to generate a notification for this entry: testCompletion(0) - Generate a usdPingTestCompleted notification. The value of this object defaults to zero, indicating that no notification has been selected. Bits: 'testCompletion': 0.
                     usdAtmVcPingSentProbes 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.4 unsigned32 read-only
The number of ping probes (OAM cells) that have been sent thus far for this test. The value of this object MUST be set to zero when the atmfM4VcTestStatus object transitions from notInUse(0) to inUse(1).
                     usdAtmVcPingProbeResponses 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.5 unsigned32 read-only
The number of ping responses that have been received thus far for this test. The value of this object MUST be set to zero when the atmfM4VcTestStatus object transitions from notInUse(0) to inUse(1).
                     usdAtmVcPingStartTime 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.6 timestamp read-only
The time (sysUpTime) when the test started.
                     usdAtmVcPingMinRtt 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.7 unsigned32 read-only
The shortest round-trip-time (RTT) for the pings that have received responses. The value of this object MUST be set to zero when the atmfM4VcTestStatus object transitions from notInUse(0) to inUse(1). A value of zero for this object implies that no ping responses have been received for the current test.
                     usdAtmVcPingMaxRtt 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.8 unsigned32 read-only
The longest round-trip-time (RTT) for the pings that have received responses. The value of this object MUST be set to zero when the atmfM4VcTestStatus object transitions from notInUse(0) to inUse(1). A value of zero for this object implies that no ping responses have been received for the current test.
                     usdAtmVcPingAverageRtt 1.3.6.1.4.1.4874.2.2.8.1.5.3.1.9 unsigned32 read-only
The average round-trip-time (RTT) for all the pings that have received responses. The value of this object MUST be set to zero when the atmfM4VcTestStatus object transitions from notInUse(0) to inUse(1). A value of zero for this object implies that no ping responses have been received for the current test.
     usdAtmTraps 1.3.6.1.4.1.4874.2.2.8.3
         usdAtmTrapPrefix 1.3.6.1.4.1.4874.2.2.8.3.0
             usdAtmVpPingTestCompleted 1.3.6.1.4.1.4874.2.2.8.3.0.1
Generated at the completion of a AtmfM4VpTest when the corresponding usdAtmVpPingCtlTrapGeneration object has the testCompletion(0) bit set.
             usdAtmVcPingTestCompleted 1.3.6.1.4.1.4874.2.2.8.3.0.2
Generated at the completion of a AtmfM4VcTest when the corresponding usdAtmVcPingCtlTrapGeneration object has the testCompletion(0) bit set.
     usdAtmConformance 1.3.6.1.4.1.4874.2.2.8.4
         usdAtmCompliances 1.3.6.1.4.1.4874.2.2.8.4.1
             usdAtmCompliance 1.3.6.1.4.1.4874.2.2.8.4.1.1
Obsolete compliance statement for entities which implement the Unisphere ATM MIB. This statement became obsolete when support was added for NBMA map lists and ATM ping.
             usdAtmCompliance2 1.3.6.1.4.1.4874.2.2.8.4.1.2
Obsolete compliance statement for entities which implement the Unisphere ATM MIB. This statement became obsolete when support was added for traffic shapping on VCC subinterfaces.
             usdAtmCompliance3 1.3.6.1.4.1.4874.2.2.8.4.1.3
Obsolete compliance statement for entities which implement the Unisphere ATM MIB. This statement became obsolete when support was added for connection admission control (CAC).
             usdAtmCompliance4 1.3.6.1.4.1.4874.2.2.8.4.1.4
Obsolete compliance statement for entities which implement the Unisphere ATM MIB. This statement became obsolete when ATM SVC, CAC used bandwidth and sub-interface address objects were added.
             usdAtmCompliance5 1.3.6.1.4.1.4874.2.2.8.4.1.5
The compliance statement for entities which implement the Unisphere ATM MIB.
         usdAtmGroups 1.3.6.1.4.1.4874.2.2.8.4.2
             usdAtmGroup 1.3.6.1.4.1.4874.2.2.8.4.2.1
Obsolete collection of objects providing management of ATM interfaces in a Unisphere product. This group became obsolete when the usdAtmIfMapGroup object was added.
             usdAtmAal5Group 1.3.6.1.4.1.4874.2.2.8.4.2.2
A collection of objects providing management of AAL5 interfaces in a Unisphere product.
             usdAtmSubIfGroup 1.3.6.1.4.1.4874.2.2.8.4.2.3
Obsolete collection of objects providing management of ATM subinterfaces in a Unisphere product. This group became obsolete when usdAtmSubIfNbma, usdAtmSubIfInverseArp, and usdAtmSubIfInverseArpRefresh were added.
             usdAtmVpTunnelGroup 1.3.6.1.4.1.4874.2.2.8.4.2.4
A collection of objects providing management of VP tunnels in a Unisphere product.
             usdAtmNbmaMapGroup 1.3.6.1.4.1.4874.2.2.8.4.2.5
A collection of object providing management of NBMA in a Unisphere product.
             usdAtmSubIfGroup2 1.3.6.1.4.1.4874.2.2.8.4.2.6
Obsolete collection of objects providing management of ATM subinterfaces in a Unisphere product. This group became obsolete when usdAtmSubIfAddress was added.
             usdAtmVpPingControlGroup 1.3.6.1.4.1.4874.2.2.8.4.2.7
A collection of object providing management of ATM VPL Ping testing in a Unisphere product.
             usdAtmVcPingControlGroup 1.3.6.1.4.1.4874.2.2.8.4.2.8
A collection of object providing management of ATM VCL Ping testing in a Unisphere product.
             usdAtmPingTrapGroup 1.3.6.1.4.1.4874.2.2.8.4.2.9
A collection of notifications supporting ATM Ping testing in a Unisphere product.
             usdAtmGroup2 1.3.6.1.4.1.4874.2.2.8.4.2.10
Obsolete collection of objects providing management of ATM interfaces in a Unisphere product. This group became obsolete when support was added for connection admission control (CAC).
             usdAtmTrafficShapingGroup 1.3.6.1.4.1.4874.2.2.8.4.2.11
A collection of objects providing management of ATM traffic shaping in a Unisphere product.
             usdAtmGroup3 1.3.6.1.4.1.4874.2.2.8.4.2.12
Obsolete collection of objects providing management of ATM interfaces in a Unisphere product. This group became obsolete when support was added for connection admission control (CAC) used bandwidth.
             usdAtmGroup4 1.3.6.1.4.1.4874.2.2.8.4.2.13
A collection of objects providing management of ATM interfaces in a Unisphere product.
             usdAtmSvcGroup 1.3.6.1.4.1.4874.2.2.8.4.2.14
A collection of objects providing management of ATM SVC interfaces in a Unisphere product.
             usdAtmSubIfGroup3 1.3.6.1.4.1.4874.2.2.8.4.2.15
A collection of objects providing management of ATM subinterfaces in a Unisphere product.