UBQS-IP-MIB: View SNMP OID List / Download MIB

VENDOR: PREMIER NETWORK CO., LTD


 Home MIB: UBQS-IP-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ubiIpMIB 1.3.6.1.4.1.7800.100.14
This MIB module defines IP information.
       ubiIpMIBNotificationPrefix 1.3.6.1.4.1.7800.100.14.0
           ubiIpMIBNotifications 1.3.6.1.4.1.7800.100.14.0.1
           ubiPingMIBNotifications 1.3.6.1.4.1.7800.100.14.0.2
               ubiPingSendCompletion 1.3.6.1.4.1.7800.100.14.0.2.1
This notification is sent at the completion of the sequence of pings.
       ubiIpMIBObjects 1.3.6.1.4.1.7800.100.14.1
           ubiIpAddrTable 1.3.6.1.4.1.7800.100.14.1.1 no-access
The table of addressing information relevant to this entity's IP addresses.
               ubiIpAddrEntry 1.3.6.1.4.1.7800.100.14.1.1.1 no-access
The addressing information for one of this entity's IP addresses.
                   ubiIpAddrType 1.3.6.1.4.1.7800.100.14.1.1.1.1 inetaddresstype read-only
The IP address type. ipv4(1) An IPv4 address as defined by the InetAddressIPv4 textual convention. ipv6(2) An IPv6 address as defined by the InetAddressIPv6 textual convention.
                   ubiIpAddress 1.3.6.1.4.1.7800.100.14.1.1.1.2 inetaddress read-only
The IP address to which this entry's addressing information pertains.
                   ubiIpAddrPrefixLen 1.3.6.1.4.1.7800.100.14.1.1.1.3 inetaddressprefixlength read-only
The prefix length associated with the IP address.
                   ubiIpAddrIfIndex 1.3.6.1.4.1.7800.100.14.1.1.1.4 interfaceindex read-only
The index value which uniquely identifies the interface to which this entry is applicable.
                   ubiIpAddrStatus 1.3.6.1.4.1.7800.100.14.1.1.1.5 integer read-only
Indicate whether this entry is primary or not. Enumeration: 'primary': 1, 'secondary': 2.
                   ubiIpAddrRowstatus 1.3.6.1.4.1.7800.100.14.1.1.1.6 rowstatus read-only
This object is used to create a new row or delete an existing row in this table.
           ubiInetRouteTable 1.3.6.1.4.1.7800.100.14.1.2 no-access
The table of addressing information relevant to this entity's IP addresses.
               ubiInetRouteEntry 1.3.6.1.4.1.7800.100.14.1.2.1 no-access
The addressing information for one of this entity's IP addresses.
                   ubiInetRouteInstance 1.3.6.1.4.1.7800.100.14.1.2.1.1 unsigned32 read-only
The instance identifier of the (conceptual) routing table containing this route.
                   ubiInetRouteDestType 1.3.6.1.4.1.7800.100.14.1.2.1.2 inetaddresstype read-only
The destination address type. ipv4(1) An IPv4 address as defined by the InetAddressIPv4 textual convention. ipv6(2) An IPv6 address as defined by the InetAddressIPv6 textual convention.
                   ubiInetRouteDest 1.3.6.1.4.1.7800.100.14.1.2.1.3 inetaddress read-only
The destination IP address of this route.
                   ubiInetRouteDestPfxLen 1.3.6.1.4.1.7800.100.14.1.2.1.4 inetaddressprefixlength read-only
                   ubiInetRouteNextHopType 1.3.6.1.4.1.7800.100.14.1.2.1.5 inetaddresstype read-only
                   ubiInetRouteNextHop 1.3.6.1.4.1.7800.100.14.1.2.1.6 inetaddress read-only
                   ubiInetRouteIfIndex 1.3.6.1.4.1.7800.100.14.1.2.1.7 interfaceindex read-only
                   ubiInetRoutetype 1.3.6.1.4.1.7800.100.14.1.2.1.8 integer read-only
Enumeration: 'indirect': 4, 'other': 1, 'direct': 3, 'invalid': 2.
                   ubiInetRouteProto 1.3.6.1.4.1.7800.100.14.1.2.1.9 integer read-only
Enumeration: 'esis': 10, 'isis': 9, 'ggp': 6, 'ospf': 13, 'egp': 5, 'rip': 8, 'bgp': 14, 'ciscoIgrp': 11, 'other': 1, 'bbnSpfIgp': 12, 'icmp': 4, 'local': 2, 'hello': 7, 'netmgmt': 3.
                   ubiInetRouteMetric1 1.3.6.1.4.1.7800.100.14.1.2.1.10 integer32 read-only
                   ubiInetRouteMetric2 1.3.6.1.4.1.7800.100.14.1.2.1.11 integer32 read-only
                   ubiInetRouteMetric3 1.3.6.1.4.1.7800.100.14.1.2.1.12 integer32 read-only
                   ubiInetRouteMetric4 1.3.6.1.4.1.7800.100.14.1.2.1.13 integer32 read-only
                   ubiInetRouteMetric5 1.3.6.1.4.1.7800.100.14.1.2.1.14 integer32 read-only
                   ubiInetRouteStatus 1.3.6.1.4.1.7800.100.14.1.2.1.15 integer read-only
Enumeration: 'active': 1, 'inactive': 2.
                   ubiInetRouteDistance 1.3.6.1.4.1.7800.100.14.1.2.1.16 integer32 read-write
                   ubiInetRouteTag 1.3.6.1.4.1.7800.100.14.1.2.1.17 unsigned32 read-write
                   ubiInetRouteNextHopName 1.3.6.1.4.1.7800.100.14.1.2.1.18 displaystring read-write
                   ubiInetRouteRowstatus 1.3.6.1.4.1.7800.100.14.1.2.1.19 rowstatus read-only
           ubiIpv6NeighborTable 1.3.6.1.4.1.7800.100.14.1.3 no-access
The table of addressing information relevant to this entity's IPv6 addresses.
               ubiIpv6NeighborEntry 1.3.6.1.4.1.7800.100.14.1.3.1 no-access
The addressing information for one of this entity's IPv6 addresses.
                   ubiIpv6NeighborIfIndex 1.3.6.1.4.1.7800.100.14.1.3.1.1 interfaceindex read-only
The inde value which uniquely identifies the interface to which this entry is applicable
                   ubiIpv6NeighborPhysAddress 1.3.6.1.4.1.7800.100.14.1.3.1.2 physaddress read-only
The media-dependent `physical' address. This object should return 0 when this entry is in the 'incomplete' state. As the entries in this table are typically not persistent when this object is written the entity should not save the change to non-volatile storage. Note: a stronger requirement is not used because this object was previously defined.
                   ubiIpv6NeighborNetAddress 1.3.6.1.4.1.7800.100.14.1.3.1.3 inetaddress read-only
The Ipv6Address corresponding to the media-dependent `physical' address. This object predates the rule limiting index objects to a max access value of 'not-accessible' and so continues to use a value of 'read-create'.
                   ubiIpv6NeighborType 1.3.6.1.4.1.7800.100.14.1.3.1.4 integer read-only
The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ubiIpv6NeighborTable. That is, it effectively dis-associates the interface identified with said entry from the mapping identified with said entry. It is an implementation- specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ubiIpv6NeighborType object. As the entries in this table are typically not persistent when this object is written the entity should not save the change to non-volatile storage. Note: a stronger requirement is not used because this object was previously defined. Enumeration: 'static': 1, 'dynamic': 0.
                   ubiIpv6NeighborState 1.3.6.1.4.1.7800.100.14.1.3.1.5 integer read-only
The Neighbor Unreachability Detection [3] state for the interface when the address mapping in this entry is used. If Neighbor Unreachability Detection is not in use, this object is always unknown(6). Enumeration: 'unknown': 6, 'probe': 4, 'invalid': 5, 'delay': 3, 'reachable': 1, 'stale': 2, 'incomplete': 7.
                   ubiIpv6NeighborLastUpdated 1.3.6.1.4.1.7800.100.14.1.3.1.6 timestamp read-only
The value of sysUpTime at the time this entry was last updated. If this entry was updated prior to the last re- initialization of the local network management subsystem, then this object contains a zero value.
                   ubiIpv6NeighborRowstatus 1.3.6.1.4.1.7800.100.14.1.3.1.7 rowstatus read-only
The status of this conceptual row. As all objects in this conceptual row have default values, a row can be created and made active by setting this object appropriately. The RowStatus TC requires that this DESCRIPTION clause states under which circumstances other objects in this row can be modified. The value of this object has no effect on whether other objects in this conceptual row can be modified.
       ubiPingMIBObjects 1.3.6.1.4.1.7800.100.14.2
           ubiPingGlobal 1.3.6.1.4.1.7800.100.14.2.1
           ubiPingSend 1.3.6.1.4.1.7800.100.14.2.2
               ubiPingSendProto 1.3.6.1.4.1.7800.100.14.2.2.1 integer read-write
The protocol to use. Enumeration: 'ip': 2, 'other': 1, 'ipv6': 3.
               ubiPingSendTarget 1.3.6.1.4.1.7800.100.14.2.2.2 displaystring read-write
The address of the device to be pinged.
               ubiPingSendRepeat 1.3.6.1.4.1.7800.100.14.2.2.3 integer32 read-write
Specifies the number of ping packets to send to the target.
               ubiPingSendPacketSize 1.3.6.1.4.1.7800.100.14.2.2.4 integer32 read-write
Specifies the size of ping packets to send to the target.
               ubiPingSendTimeout 1.3.6.1.4.1.7800.100.14.2.2.5 integer32 read-write
Specifies the amount of time to wait for a response.
               ubiPingSendInterval 1.3.6.1.4.1.7800.100.14.2.2.6 integer32 read-write
Specifies the amount of time to wait before sending the next packet.
               ubiPingSendSrcAddr 1.3.6.1.4.1.7800.100.14.2.2.7 displaystring read-write
Specifies the sender IP address for sending packets.
               ubiPingSendTTL 1.3.6.1.4.1.7800.100.14.2.2.8 integer32 read-write
Specifies the TTL.
               ubiPingSendTos 1.3.6.1.4.1.7800.100.14.2.2.9 integer32 read-write
Specifies the Type Of Service.
               ubiPingSendDF 1.3.6.1.4.1.7800.100.14.2.2.10 integer read-write
Specifies the DF bit in IP header. dont(2) means a packet cannot be fragmented. Enumeration: 'do': 1, 'none': 0, 'dont': 2.
               ubiPingSendExecute 1.3.6.1.4.1.7800.100.14.2.2.15 integer read-write
Send the ping packets when value is set to send(1). Enumeration: 'send': 1.
           ubiPingResults 1.3.6.1.4.1.7800.100.14.2.3
               ubiPingSendCompleted 1.3.6.1.4.1.7800.100.14.2.3.1 truthvalue no-access
Set to true when all the packets in this sequence have been either responded to or timed out.
               ubiPingSendPackets 1.3.6.1.4.1.7800.100.14.2.3.2 counter32 no-access
The total number of the sending ping.
               ubiPingReceivedPackets 1.3.6.1.4.1.7800.100.14.2.3.3 counter32 no-access
The total number of the received ping.
       ubiIpMIBConformance 1.3.6.1.4.1.7800.100.14.3
           ubiIpMIBCompliances 1.3.6.1.4.1.7800.100.14.3.1
               ubiIpMIBCompliance 1.3.6.1.4.1.7800.100.14.3.1.2
The compliance statement for entities which implement the UBQS-IP-MIB
           ubiIpMIBGroups 1.3.6.1.4.1.7800.100.14.3.2
               ubiIpAddrGroup 1.3.6.1.4.1.7800.100.14.3.2.1
A collection of objects containing information about the address information of system.
               ubiPingGroup 1.3.6.1.4.1.7800.100.14.3.2.2
A collection of objects containing information about the ping.