TROPIC-PTP-MIB: View SNMP OID List / Download MIB

VENDOR: NOKIA


 Home MIB: TROPIC-PTP-MIB
Download as:   
SNMPv2-CONF, TROPIC-SHELF-MIB, IF-MIB, TROPIC-GLOBAL-REG, SNMPv2-SMI, TROPIC-SLOT-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
     tnPtpMibModule 1.3.6.1.4.1.7483.1.1.2.2.4.7
Nokia OPD-WDM MIB for 1588V2 module
 tnPtpMIBObjects 1.3.6.1.4.1.7483.2.2.4.9.1
     tnPtpSystem 1.3.6.1.4.1.7483.2.2.4.9.1.1
         tnPtpSystemTable 1.3.6.1.4.1.7483.2.2.4.9.1.1.1 no-access
This table provides global parameters for a PTP-capable card.
             tnPtpSystemEntry 1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1 no-access
Configuration information concerning PTP of the card.
                 tnPtpSystemClockMode 1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.1 integer32 read-only
This parameter determines the PTP operational mode of the card. It is intended to be managed by the System Operator. 0: 1588 function of this card is disabled 1: Ordinary Clock - Slave 2: Ordinary Clock - Master 3: Boundary Clock 4: End-to-End Transparent Clock 5: Peer-to-Peer Transparent Clock 6: End-to-End Transparent Clock And OC-Slave 7: End-to-End Transparent Clock And BC 8: Peer-to-Peer Transparent Clock And OC-Slave 9: this card provides timestamping for the local ports only, need to work with the PTPCTL card 10: ITU-T G.8275.1 T-GM 11: ITU-T G.8275.1 T-BC 12: ITU-T G.8275.1 T-TSC.
                 tnPtpSystemFrequencyReference 1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.2 integer32 read-only
This parameter determines the frequency reference for the PTP clocks in the card. It is intended to be managed by the System Operator. This parameter is valid when the tnPtpSystemClockMode = 1/2/3/6/7/8 0: the local PTP clock uses the physical layer frequency reference, and this clock is syntonized with the PTP master. 1: the local PTP clock uses the physical layer frequency reference, but this clock is' unsyntonized with the PTP master. 2: the local PTP clock uses the packet layer frequency reference which is recovered from the PTP.
                 tnPtpSystemTimeReference 1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.3 integer32 read-only
This parameter determines the time reference for the local PTP clocks in the card. It is intended to be managed by the System Operator. This parameter is valid when the tnPtpSystemClockMode = 2/3 0: no reference. 1: the external 1pps. The local PTP clock aligns the 1588 time to the phase of the external 1pps. 2: the external ToD 3: the recovered PTP time. 4: the external ToD or the recovered PTP time. Values of 0/1/2 apply to OC-Master only; Values of 2/3/4 apply to BC only.
                 tnPtpSystemNextClockNumber 1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.4 integer32 read-only
This parameter indicates the next available clock number in the card, which will be used when the user wants to create a new row in the tnPtpClockDefaultDSConfigTable.
                 tnPtpSystemClockProfile 1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.5 integer read-only
This parameter determines the PTP profile of the card. It is intended to be managed by the System Operator. 0: IEEE_1588_2008_CCSA profile 1: G_8275_1 profile. Enumeration: 'ieee-1588-2008-CCSA': 0, 'g-8275-1': 1.
                 tnPtpSystemClockServoMode 1.3.6.1.4.1.7483.2.2.4.9.1.1.1.1.6 integer32 read-only
This parameter determines the PTP Servo Mode of the card. It is intended to be managed by the System Operator. 0: bellLabs 1: standard
     tnPtpClock 1.3.6.1.4.1.7483.2.2.4.9.1.2
         tnPtpClockDefaultDSConfigTable 1.3.6.1.4.1.7483.2.2.4.9.1.2.1 no-access
This table provides configurable information for an OC/BC PTP clock. For TC (E2E or P2P), this table is not available.
             tnPtpClockDefaultDSConfigEntry 1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1 no-access
Configurations of an OC/BC PTP clock.
                 tnPtpClockIndex 1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.1 aluwdmptpclockindex no-access
A unique value which identifies a PTP clock in an NE.
                 tnPtpClockDefaultDSConfigDomain 1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.2 unsigned32 read-only
The domain associated with the PTP clock.
                 tnPtpClockDefaultDSConfigPriority1 1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.3 unsigned32 read-only
The priority1 value of the PTP clock.
                 tnPtpClockDefaultDSConfigPriority2 1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.4 unsigned32 read-only
The priority2 value of the PTP clock.
                 tnPtpClockDefaultDSConfigPreferedGM 1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.5 aluwdmptpclockidentifier read-only
The identifier of a PTP clock that the local PTP clock will lock to. It is for static master clock selection. It is valid for OC-slave or BC. And for BC, it is valid only when tnPtpSystemTimeReference =3. NULL is initializing value.
                 tnPtpClockDefaultDSConfigIpAddressType 1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.6 inetaddresstype read-only
This parameter indicates the IP address type for tnPtpClockDefaultDSConfigIpAddress. The default value is IPv4(1).
                 tnPtpClockDefaultDSConfigIpAddress 1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.7 inetaddress read-only
The unicast IP address of the PTP clock. NULL is initializing value.
                 tnPtpClockDefaultDSConfigAdminStatus 1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.8 integer32 read-only
It is used for the user to enable/disable the PTP clock. 0: Disable 1: Enable.
                 tnPtpClockDefaultDSConfigRowStatus 1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.9 rowstatus read-only
The RowStatus of PTP clock entry.
                 tnPtpClockDefaultDSConfigLocalPriority 1.3.6.1.4.1.7483.2.2.4.9.1.2.1.1.10 unsigned32 read-only
The localPriority value of the PTP clock.
         tnPtpClockDefaultDSInfoTable 1.3.6.1.4.1.7483.2.2.4.9.1.2.2 no-access
This table provides non-configurable information for an OC/BC PTP clock. For TC (E2E or P2P), this table is not available.
             tnPtpClockDefaultDSInfoEntry 1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1 no-access
Information of an OC/BC PTP clock
                 tnPtpClockDefaultDSInfoIdentifier 1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.1 aluwdmptpclockidentifier read-only
The identifier of the PTP clock.
                 tnPtpClockDefaultDSInfoTwoStepFlag 1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.2 truthvalue read-only
This is an indicator of whether master-slave synchronization utilizes follow-up messaging (IEEE 1588-2008 Section 8.2.1.2.1.). This parameter is read-only. A PTP port has a configurable parameter which determines if follow-up messaging will be used for this port. true: If some of the PTP ports in the clock uses follow-up messaging. false: If none of the PTP ports in the clock uses follow-up messaging.
                 tnPtpClockDefaultDSInfoNumberOfPorts 1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.3 unsigned32 read-only
The number of PTP ports in the PTP clock.
                 tnPtpClockDefaultDSInfoClass 1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.4 unsigned32 read-only
The clock class on the PTP clock (IEEE1588-2008 Section 8.2.1.3.1.1).
                 tnPtpClockDefaultDSInfoAccuracy 1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.5 unsigned32 read-only
The accuracy of the PTP clock
                 tnPtpClockDefaultDSInfoOffsetScaledLogVariance 1.3.6.1.4.1.7483.2.2.4.9.1.2.2.1.6 integer32 read-only
The frequency offset scaled log variance of the PTP clock (IEEE P1588-2008 Section 7.6.3).
         tnPtpClockCurrentDSTable 1.3.6.1.4.1.7483.2.2.4.9.1.2.3 no-access
This table provides tn PTP Clock current Data Set for an OC/BC PTP Clock. For TC (E2E or P2P), this table is not available.
             tnPtpClockCurrentDSEntry 1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1 no-access
Operational information of a PTP clock.
                 tnPtpClockCurrentDSOffSetFromMaster 1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.1 integer32 read-only
The current value of the time difference between a master and a slave as computed by the slave. The unit is ns (nano-seconds). Refer to Section 8.2.2.3 of IEEE1588-2008.
                 tnPtpClockCurrentDSMeanPathDelay 1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.2 unsigned32 read-only
The mean propagation time between a master and a slave as computed by the slave. The unit is ns (nano-seconds). Refer to Section 8.2.2.4 of IEEE1588-2008.
                 tnPtpClockCurrentDSCurrentTime 1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.3 octet string read-only
The current PTP time of the clock PTP clock. The format is as below: 'S.N'. S stands for the second part of time (48 octets) N stands for the nano-second part of time (32 octets).
                 tnPtpClockCurrentDSRecoveredClockState 1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.4 aluwdmptprecoveredclockstate read-only
The synchronization state of the PTP clock.
                 tnPtpClockCurrentDSLockedPtpPort 1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.5 integer32 read-only
The number or index of the PTP port where the PTP clock is locked to. This parameter together with the tnPtpClockIndex points to a row of the tnPtpPortDSConfigTable. It is meaningful fo OC-slave or BC. And for BC, it is valid only when tnPtpSystemTimeReference = (the recovered PTP time).
                 tnPtpClockCurrentDSStepsRemoved 1.3.6.1.4.1.7483.2.2.4.9.1.2.3.1.6 unsigned32 read-only
The number of PTP clocks along the timing distribution path from the Grandmaster to the local PTP clock.
         tnPtpClockParentDSTable 1.3.6.1.4.1.7483.2.2.4.9.1.2.4 no-access
This table provides information of the Parent Data Set for an OC/BC PTP clock. For TC (E2E or P2P), this table is not available.
             tnPtpClockParentDSEntry 1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1 no-access
Parent clock information of an OC/BC clock
                 tnPtpClockParentDSIdentifier 1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.1 aluwdmptpclockidentifier read-only
Identifier of the parent clock which the local PTP clock locks to. If a PTP clock locks to an external ToD input interface, it should be equal to: 1 - for 1pps/ToD interface #1 2 - for 1pps/ToD interface #2.
                 tnPtpClockParentDSPortNum 1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.2 integer32 read-only
The PTP port number of the parent clock, via which the local PTP clock is synchronizing to the parent clock.
                 tnPtpClockParentDSStats 1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.3 truthvalue read-only
This is an indicator of whether the stats of the parent clock are collected by the local PTP clock.
                 tnPtpClockParentDSOffsetScaledLogVariance 1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.4 integer32 read-only
The frequency offset scaled log variance of the parent clock (IEEE P1588-2008 Section 7.6.3).
                 tnPtpClockParentDSPhaseChangeRate 1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.5 integer32 read-only
The phase change rate of the parent clock(IEEE P1588-2008 Section 7.6.3).
                 tnPtpClockParentDSGrandmasterClockId 1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.6 aluwdmptpclockidentifier read-only
The clock identifier of the grandmaster which the parent clock locks to.
                 tnPtpClockParentDSGrandmasterClass 1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.7 unsigned32 read-only
The clock class of the grandmaster which the parent clock locks to.
                 tnPtpClockParentDSGrandmasterAccuracy 1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.8 unsigned32 read-only
The accuracy of the grandmaster which the parent clock locks to.
                 tnPtpClockParentDSGrandmasterOffsetScaledLogVariance 1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.9 unsigned32 read-only
The OffsetScaledLogVariance value of the grandmaster which the parent clock locks to.
                 tnPtpClockParentDSGrandmasterPriority1 1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.10 unsigned32 read-only
The priority1 value of the grandmaster which the parent clock locks to.
                 tnPtpClockParentDSGrandmasterPriority2 1.3.6.1.4.1.7483.2.2.4.9.1.2.4.1.11 unsigned32 read-only
The priority2 value of the grandmaster which the parent clock locks to.
         tnPtpClockTimePropertiesDSTable 1.3.6.1.4.1.7483.2.2.4.9.1.2.5 no-access
This table provides the information of the Time Properties Data Set for an OC/BC PTP clock. For TC (E2E or P2P), this table is not available.
             tnPtpClockTimePropertiesDSEntry 1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1 no-access
Time properties information of an OC/BC PTP clock.
                 tnPtpClockTimePropertiesDSCurrentUtcOffset 1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.1 integer32 read-only
The current UTC offset value. Refer to Section 8.2.4.2 of IEEE1588-2008. The unit is seconds.
                 tnPtpClockTimePropertiesDSCurrentUtcOffsetValid 1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.2 truthvalue read-only
This parameter indicates whether current UTC offset is valid or not. Refer to Section 8.2.4.3 of IEEE1588-2008.
                 tnPtpClockTimePropertiesDSLeap59 1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.3 truthvalue read-only
This parameter indicates whether the last minute of the current UTC day contains 59 seconds or not. Refer to Section 8.2.4.4 of IEEE1588-2008.
                 tnPtpClockTimePropertiesDSLeap61 1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.4 truthvalue read-only
This parameter indicates whether the last minute of the current UTC day contains 61 seconds or not. Refer to Section 8.2.4.5 of IEEE1588-2008.
                 tnPtpClockTimePropertiesDSTimeTraceable 1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.5 truthvalue read-only
This parameter indicates whether the timescale or the current UTC offset are traceable to a primary reference or not. Refer to Section 8.2.4.6 of IEEE1588-2008.
                 tnPtpClockTimePropertiesDSFrequencyTraceable 1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.6 truthvalue read-only
This parameter indicates whether the frequency determining the timescale is traceable to a primary reference or not. Refer to Section 8.2.4.7 of IEEE1588-2008.
                 tnPtpClockTimePropertiesDSPtpTimescale 1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.7 truthvalue read-only
This parameter indicates the type of time scale of the grandmaster clock: true: PTP timescale false: ARB timescale Refer to Section 8.2.4.8 of IEEE1588-2008.
                 tnPtpClockTimePropertiesDSPtpTimeSource 1.3.6.1.4.1.7483.2.2.4.9.1.2.5.1.8 unsigned32 read-only
This parameter indicates the timesource used by grandmaster clock: -0x10: ATOMIC_CLOCK -0x20: GPS -0x30: TEERESTRIAL_RADIO -0x40: PTP -0x50: NTP -0x60: HAND_SET -0x90: OTHER -0xA0: INTERNAL_OSCILLATOR Refer to Section 8.2.4.9 of IEEE1588-2008.
     tnPtpPort 1.3.6.1.4.1.7483.2.2.4.9.1.3
         tnPtpPortNextIndexTable 1.3.6.1.4.1.7483.2.2.4.9.1.3.1 no-access
This table provides the next available index for a PTP port to be created in a PTP clock.
             tnPtpPortNextIndexEntry 1.3.6.1.4.1.7483.2.2.4.9.1.3.1.1 no-access
Next available index for a PTP port to be created in a PTP clock.
                 tnPtpPortNextIndex 1.3.6.1.4.1.7483.2.2.4.9.1.3.1.1.1 integer32 read-only
This parameter indicates the next available index for a PTP port to be created in a PTP clock, which will be used when the user wants to create a new row in tnPtpPortDSConfigTable.
         tnPtpPortDSConfigTable 1.3.6.1.4.1.7483.2.2.4.9.1.3.2 no-access
This table provides configuration for a PTP port.
             tnPtpPortDSConfigEntry 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1 no-access
Configuration information concerning a PTP port.
                 tnPtpPortDSPortIndex 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.1 integer32 no-access
The value of tnPtpPortDSPortIndex uniquely identifies a PTP port in a PTP clock. It equals to the portNumber used in the PTP message. Refer to Section 7.5.2.3 of IEEE1588-2008.
                 tnPtpPortDSConfigAssociatedPhysicalPort 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.2 interfaceindex read-only
The physical port which this PTP port is associated to. For the same physical port, it has the same value as 'ifIndex' of the card's port table. To unassociate a PTP port from a physical port, set this parameter to 0.
                 tnPtpPortDSConfigVlanVID 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.3 unsigned32 read-only
The VLAN-ID of the Vlan tag for the tx/rx PTP messages. It shall be within the range of [0,4094], 0 means untagged.
                 tnPtpPortDSConfigVlanTPID 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.4 unsigned32 read-only
The TPID of the Vlan tag for the tx/rx PTP messages. It is valid when tnPtpPortDSConfigVlanVID is not 0.
                 tnPtpPortDSConfigAnnoRxTimeout 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.5 integer32 read-only
The administrative value for the number of timeouts for the announce message associated with the 1588 PTP reference/port. The total time in seconds to timeout is calculated by the tnPtpPortDSAnnoRxTimeout * 2 ^ tnPtpPortDSLogAnnoInterval. Current configurable range: 2 to 255.
                 tnPtpPortDSConfigLogAnnoInterval 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.6 integer32 read-only
The administrative value, which is represented as logarithm to the base 2 of the transmission interval for the announce message in this PTP port. Valid values: -4, -3, -2, -1, 0, 1, 2, 3, 4.
                 tnPtpPortDSConfigLogSyncInterval 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.7 integer32 read-only
The administrative value, which is represented as logarithm to the base 2 of the transmission interval for the sync message in this PTP port. Valid values: -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4.
                 tnPtpPortDSConfigLogDelayReqInterval 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.8 integer32 read-only
The administrative value, which is represented as logarithm to the base 2 of the transmission interval for the delay_req message in this PTP port. Valid values: -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4.
                 tnPtpPortDSConfigLogMinPDelayReqInterval 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.9 integer32 read-only
The administrative value, which is represented as logarithm to the base 2 of the transmission interval for the pdelay_req message in this PTP port. Valid values: -7, -6, -5, -4, -3, -2, -1, 0, 1, 2, 3, 4.
                 tnPtpPortDSConfigAdminStatus 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.10 integer32 read-only
It is used for the user to administratively manage the PTP protocols on the PTP port 0: Disable 1: Enable 2: MT1 (maintenance state 1) 3: MT2 (maintenance state 2).
                 tnPtpPortDSConfigRole 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.11 integer32 read-only
It is used for the user to set the role of the PTP port. It is valid for BC only. 0: Automatic 1: Slave 2: Master 3: Passive.
                 tnPtpPortDSConfigDelayMechanism 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.12 integer read-only
The delay mechanism for the PTP port. Enumeration: 'e2e': 1, 'p2p': 2.
                 tnPtpPortDSConfigVersionNumber 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.13 integer read-only
The protocol version to be supported in the PTP port. Enumeration: 'v1': 1, 'v2': 2.
                 tnPtpPortDSConfigAsymCorrection 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.14 integer32 read-only
It allows the user to specify the correction delay for asymmetrical network path. Refer to Section 7.4.2 of IEEE1588-2008. Value range: {-100ms, +100ms}. The unit of this attribute shall be ns and the steps of this attribute shall be 1ns.
                 tnPtpPortDSConfigTwoStepFlag 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.15 truthvalue read-only
This parameter determines if follow-up messaging will be used for this PTP port. true: If the port will use follow-up messaging false: If the port will not use follow-up messaging.
                 tnPtpPortDSConfigEncapType 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.16 unsigned32 read-only
The encapsulation type to transport PTP for the PTP port: 1: UDP/IPv4 per IEEE1588-2008 Annex D 2: UDP/IPv6 per IEEE1588-2008 Annex D 3: Ethernet per IEEE1588-2008 Annex F.
                 tnPtpPortDSConfigAddressingMode 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.17 integer32 read-only
Indicates addressing mode of the PTP message in the PTP port: - 0: Multicast for all PTP messages - 1: Unicast for all PTP messages with the provisioned destination address. - 2: Hybrid mode. The Delay_Req and Delay_Resp messages are sent with the unicast address while other PTP messages are sent with the multicast address.
                 tnPtpPortDSConfigUnicastForDelayReq 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.18 truthvalue read-only
Indicates how the Delay_Req message is sent in the PTP port regarding the destination address. This parameter is valid only when tnPtpPortAddressingMode is Multicast true: The port sends the Delay_Req message with unicast address. false: The port sends the Delay_Req message with multicast address.
                 tnPtpPortDSConfigUnicastNegotiation 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.19 truthvalue read-only
An administrative value indicating whether the unicast negotiation function is enabled or disabled for the PTP port. It is valid when tnPtpPortAddressingMode is Multicast. true: Unicast negotiation is enabled. false: Unicast negotiation is disabled.
                 tnPtpPortDSConfigDestMac 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.20 macaddress read-only
The unicast destination MAC address for the transmitted PTP messages of the PTP port. It will only be applicable when (tnPtpPortEncapType == 3 ) and (tnPtpPortAddressingMode == 1).
                 tnPtpPortDSConfigDestIpAddrType 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.21 inetaddresstype read-only
The parameter indicates the IP address type for tnPtpPortDSConfigDestIpAddr.
                 tnPtpPortDSConfigDestIpAddr 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.22 inetaddress read-only
The unicast destination IPv4/IPv6 address for the transmitted PTP messages of the PTP port. It will only be applicable when (tnPtpPortEncapType == 1 or 2) and (tnPtpPortAddressingMode == 1).
                 tnPtpPortDSConfigRowStatus 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.23 rowstatus read-only
The RowStatus of the PTP Port entry.
                 tnPtpPortDSConfigConnectedPtpioTimingPort 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.24 interfaceindexorzero read-only
The timing port of the PTPIO card which this PTP port is connected to. It has the same value as 'ifIndex' of the card's port table. To unconnect a PTP port from a PTPIO timing port, set this parameter to 0.
                 tnPtpPortDSConfigAutoLinkAsyMeasureTrigger 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.25 truthvalue read-only
The action to trigger automatic link asymmetry measurement. true - trigger automatic link asymmetry measurement false - no action.
                 tnPtpPortDSConfigNotSlave 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.26 truthvalue read-only
An administrative value indicating whether the ptp port can be placed in the SLAVE state.
                 tnPtpPortDSConfigLocalPriority 1.3.6.1.4.1.7483.2.2.4.9.1.3.2.1.27 unsigned32 read-only
The localPriority value of the PTP port.
         tnPtpPortDSInfoTable 1.3.6.1.4.1.7483.2.2.4.9.1.3.3 no-access
This table contains non-configurable information of a PTP port
             tnPtpPortDSInfoEntry 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1 no-access
Non-configurable information of a PTP port.
                 tnPtpPortDSInfoPeerPathDelay 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.1 integer32 read-only
It's an estimate of the current one-way propagation delay on the link attached to the PTP port. The unit is ns. This attribute is valid only when tnPtpPortDSConfigDelayMechanism = p2p.
                 tnPtpPortDSInfoPortOperState 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.2 aluwdmtnptpportstate read-only
The state of the PTP port.
                 tnPtpPortDSInfoNumOfSessions 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.3 integer32 read-only
The parameter indicates the number of the active sessions of the PTP port.
                 tnPtpPortDSInfoAutoLinkAsyMeasureStatus 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.4 integer32 read-only
The parameter indicates the state of the automatic measurement trigger. 0 - noTrigger 1 - inProgress 2 - successful 3 - noMsgReceived 4 - noMsgReceivedAfterSwap 5 - oswFailure 6 - unstable timestamps.
                 tnPtpPortDSInfoMeasuredLinkAsymmetry 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.5 integer32 read-only
The parameter indicates the measured delay asymmetry of the PTP port. It is valid only when tnPtpPortDSInfoAutoMeasureStatus = 1.
                 tnPtpPortDSInfoAnnounceMsgTx 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.6 counter64 read-only
Indicates the number of Announce packets transmitted to this port.
                 tnPtpPortDSInfoAnnounceMsgRx 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.7 counter64 read-only
Indicates the number of Announce packets received from this port.
                 tnPtpPortDSInfoSyncMsgTx 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.8 counter64 read-only
Indicates the number of Sync packets transmitted to this port.
                 tnPtpPortDSInfoSyncMsgRx 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.9 counter64 read-only
Indicates the number of Sync packets received from this port.
                 tnPtpPortDSInfoDelayReqMsgTx 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.10 counter64 read-only
Indicates the number of Delay Request packets transmitted to this port.
                 tnPtpPortDSInfoDelayReqMsgRx 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.11 counter64 read-only
Indicates the number of Delay request packets received from this port.
                 tnPtpPortDSInfoDelayRspMsgTx 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.12 counter64 read-only
Indicates the number of Delay response packets transmitted to this port.
                 tnPtpPortDSInfoDelayRspMsgRx 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.13 counter64 read-only
Indicates the number of Delay response packets received from this port.
                 tnPtpPortDSInfoSignalingMsgTx 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.14 counter64 read-only
Indicates the number of Signaling packets transmitted to this port.
                 tnPtpPortDSInfoSignalingMsgRx 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.15 counter64 read-only
Indicates the number of Signaling packets received from this port.
                 tnPtpPortDSInfoManagementMsgTx 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.16 counter64 read-only
Indicates the number of Management packets transmitted to this port.
                 tnPtpPortDSInfoManagementMsgRx 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.17 counter64 read-only
Indicates the number of Management packets received from this port.
                 tnPtpPortDSInfoFollowUpMsgTx 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.18 counter64 read-only
Indicates the number of FollowUp packets transmitted to this port.
                 tnPtpPortDSInfoFollowUpMsgRx 1.3.6.1.4.1.7483.2.2.4.9.1.3.3.1.19 counter64 read-only
Indicates the number of FollowUp packets received from this port.
     tnPtpExtTodIf 1.3.6.1.4.1.7483.2.2.4.9.1.4
         tnPtpExtTodIfTable 1.3.6.1.4.1.7483.2.2.4.9.1.4.1 no-access
This table contains parameters of the external 1PPS/ToD interfaces.
             tnPtpExtTodIfEntry 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1 no-access
Attributes of an external 1PPS&ToD interface.
                 tnPtpExtTodIfIndex 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.1 interfaceindex no-access
The index of the 1pps/ToD interface. It contains the shelf, slot and port number information and is equal to the ifIndex of the ifTable.
                 tnPtpExtTodIfDirection 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.2 unsigned32 read-only
The direction of the 1PPS&ToD interface. 0: Input (to the node) 1: Output (from the node).
                 tnPtpExtTodSignalValid 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.3 truthvalue read-only
This parameter enables/disables the ToD signal of the 1PPS&ToD interface. true: The ToD signal is enabled. false: The ToD signal is disabled.
                 tnPtpExtTodIfPulseFormat 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.4 unsigned32 read-only
The format for the 1PPS signal of the 1PPS&ToD interface. 0: 1 pulse per second 1: 1 pulse per minute 2: 1 pulse per hour.
                 tnPtpExtTodIfToDFormat 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.5 unsigned32 read-only
The format for the ToD signal of the 1PPS&ToD interface 0: UBX 1: IRIG-B 2: IRIG-D This parameter is valid only when tnPtpExtTodSignalValid is true.
                 tnPtpExtTodIfCableCorrection 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.6 integer32 read-only
The compensation value of the cable for the 1PPS&ToD interface. Value range: {-100ms, +100ms}. The unit of this attribute shall be ns and the steps of this attribute shall be 1ns.
                 tnPtpExtTodIfAdminStatus 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.7 integer32 read-only
The Admin status of the 1PPS&ToD interface. 0: Disable 1: Enable.
                 tnPtpExtTodIf1ppsStatus 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.8 unsigned32 read-only
The operational status of the 1PPS signal of the 1PPS&ToD interface. 1: Normal 2: Loss. This parameter is valid only when tnPtpExtTodIfDirection is input.
                 tnPtpExtTodIfToDStatus 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.9 unsigned32 read-only
The operational status of the ToD signal of the 1PPS&ToD interface. 1: Normal 2: Degraded 3: Do Not used (default) 4: Loss This parameter is valid only when tnPtpExtTodIfDirection is input and tnPtpExtTodSignalValid is true.
                 tnPtpExtTodIfAdditionalInfo 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.10 octet string read-only
The additional information for the 1PPS&ToD interface.
                 tnPtpExtCompensationMode 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.11 integer32 read-only
This parameter determines the PTP Compensation mode. It is intended to be managed by the System Operator. 0: precalibrated mode 1: auto mode 2: manual mode
                 tnPtpExtCompenAutoTestTrigger 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.12 truthvalue read-only
This parameter enables/disables Compensation AutoTest true: enabled Compensation AutoTest. false: disabled Compensation AutoTest.
                 tnPtpExtCompenManualValueIn 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.13 integer32 read-only
The compensation manual value in for the 1PPS&ToD interface. Value range: {-127ns, +127ns}. The unit of this attribute shall be ns.
                 tnPtpExtCompenManualValueOut 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.14 integer32 read-only
The compensation manual value out for the 1PPS&ToD interface. Value range: {-127ns, +127ns}. The unit of this attribute shall be ns.
                 tnPtpExtCompenMeasureStatus 1.3.6.1.4.1.7483.2.2.4.9.1.4.1.1.15 integer32 read-only
This parameter indicate the the status of automatical calibration measurement 0: noTrigger 1: inProgress 2: successful 2: failed.
 tnPtpConformance 1.3.6.1.4.1.7483.2.2.4.9.2
     tnPtpGroups 1.3.6.1.4.1.7483.2.2.4.9.2.1
         tnPtpSystemGroup 1.3.6.1.4.1.7483.2.2.4.9.2.1.1
PTP system information for the card.
         tnPtpClockDefaultDSConfigGroup 1.3.6.1.4.1.7483.2.2.4.9.2.1.2
Configurable information for a PTP clock.
         tnPtpClockDefaultDSInfoGroup 1.3.6.1.4.1.7483.2.2.4.9.2.1.3
Non-configurable information for a PTP clock.
         tnPtpClockCurrentDSGroup 1.3.6.1.4.1.7483.2.2.4.9.2.1.4
Operational information for a PTP clock.
         tnPtpClockParentDSGroup 1.3.6.1.4.1.7483.2.2.4.9.2.1.5
Parent clock information for a PTP clock.
         tnPtpClockTimePropertiesDSGroup 1.3.6.1.4.1.7483.2.2.4.9.2.1.6
Time properties information for a PTP clock.
         tnPtpPortNextIndexGroup 1.3.6.1.4.1.7483.2.2.4.9.2.1.7
Available next index for a PTP port to be created.
         tnPtpPortDSConfigGroup 1.3.6.1.4.1.7483.2.2.4.9.2.1.8
Configurable information for a PTP port.
         tnPtpPortDSInfoGroup 1.3.6.1.4.1.7483.2.2.4.9.2.1.9
Non-configurable information for a PTP port.
         tnPtpExtTodIfGroup 1.3.6.1.4.1.7483.2.2.4.9.2.1.11
Information for an external 1PPS&ToD port.
     tnPtpCompliances 1.3.6.1.4.1.7483.2.2.4.9.2.2
         tnPtpCompliance 1.3.6.1.4.1.7483.2.2.4.9.2.2.1