TROPIC-L1SERVICE-MIB: View SNMP OID List / Download MIB

VENDOR: NOKIA


 Home MIB: TROPIC-L1SERVICE-MIB
Download as:   
SNMPv2-CONF, IP-FORWARD-MIB, TROPIC-SHELF-MIB, IF-MIB, TROPIC-GLOBAL-REG, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, TROPIC-SLOT-MIB, TROPIC-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
     tnL1ServiceMibModule 1.3.6.1.4.1.7483.1.1.2.3.1
Control Network and APS MIB.
 tnL1ServiceConf 1.3.6.1.4.1.7483.2.3.1.1
     tnL1ServiceGroups 1.3.6.1.4.1.7483.2.3.1.1.1
         tnControlNetworkLinkGroup 1.3.6.1.4.1.7483.2.3.1.1.1.1
         tnCNLinkViaChannelGroup 1.3.6.1.4.1.7483.2.3.1.1.1.2
         tnIpStaticRouteGroup 1.3.6.1.4.1.7483.2.3.1.1.1.3
         tnIpCidrRouteGroup 1.3.6.1.4.1.7483.2.3.1.1.1.4
         tnL1TrafficParmGroup 1.3.6.1.4.1.7483.2.3.1.1.1.5
         tnIpRouteGlobalGroup 1.3.6.1.4.1.7483.2.3.1.1.1.6
         tnApsGroup 1.3.6.1.4.1.7483.2.3.1.1.1.10
         tnApsMemberGroup 1.3.6.1.4.1.7483.2.3.1.1.1.11
         tnControlNetworkMapGroup 1.3.6.1.4.1.7483.2.3.1.1.1.13
         tnNetIfGroup 1.3.6.1.4.1.7483.2.3.1.1.1.14
         tnNetIfFacilityGroup 1.3.6.1.4.1.7483.2.3.1.1.1.15
         tnPackApsGroup 1.3.6.1.4.1.7483.2.3.1.1.1.16
     tnL1ServiceCompliances 1.3.6.1.4.1.7483.2.3.1.1.2
         tnL1ServiceCompliance 1.3.6.1.4.1.7483.2.3.1.1.2.1
 tnL1ServiceObjs 1.3.6.1.4.1.7483.2.3.1.2
     tnControlNetworkLink 1.3.6.1.4.1.7483.2.3.1.2.1
         tnControlNetworkLinkTable 1.3.6.1.4.1.7483.2.3.1.2.1.1 no-access
The control network link table.
             tnControlNetworkLinkEntry 1.3.6.1.4.1.7483.2.3.1.2.1.1.1 no-access
The Control Network connection entry. For the 1696R, the index is a logical derived value created by the system. For the 1830 PSS-32, the index is the physical shelf/slot/port with an exception for attribute tnCNLinkPhysicalIfIndex where the index is an integer (1..20).
                 tnCNLinkDescr 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.1 snmpadminstring read-only
                 tnCNLinkAdminStatus 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.2 tropiclinkadminstatetype read-only
The Admin status of the link.
                 tnCNLinkOperStatus 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.3 tropiclinkoperationalstatetype read-only
The Operational status of the link.
                 tnCNLinkPhysicalIfIndex 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.5 interfaceindex read-only
The physical interface index of the link. SET on this attribute is currently not supported.
                 tnCNLinkIpAddress 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.7 ipaddress read-only
                 tnCNLinkSubnetMask 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.8 ipaddress read-only
                 tnCNLinkHelloInterval 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.14 unsigned32 read-only
The hello interval of the link. Current configurable range: 1 to 65535.
                 tnCNLinkRtrDeadInterval 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.15 unsigned32 read-only
The router dead interval of the link. For 1830, the range is (1..'FFFF'h).
                 tnCNLinkTeMetric 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.22 unsigned32 read-only
The Traffic eng metric of the link. For OSC, default is 10; for GCC OTU1, default is 40; for GCC OTU2 default is 30; for GCC OTU3 default is 20. Current configurable range: 1 to 65535.
                 tnCNLinkOspfRoutingState 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.31 integer read-only
Enumeration: 'redistribute': 3, 'enable': 2, 'disable': 1.
                 tnCNLinkConfigIfType 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.32 integer read-only
The OSPF interface type of the link. Enumeration: 'notValid': 1, 'pointToMultipoint': 6, 'virtual': 5, 'broadcast': 2, 'nonBroadcastMultipleAccess': 3, 'pointToPoint': 4.
                 tnCNLinkConfigRtrPriority 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.33 unsigned32 read-only
The router priority of the link.
                 tnCNLinkEquipOperStatus 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.34 tropiclinkoperationalstatetype read-only
The Operational status of the associated physical link.
                 tnCNLinkDhcpEnabled 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.35 truthvalue read-only
Indicates if DHCP is enabled on the link. Sets are restricted to the local ethernet port CN link.
                 tnCNLinkSpeed 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.36 integer read-only
Enumeration: 'auto': 1, 'rate10Mbps': 2, 'rate100Mbps': 3, 'rate1000Mbps': 4.
                 tnCNLinkDuplex 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.37 integer read-only
Enumeration: 'auto': 1, 'full': 3, 'half': 2.
                 tnCNLinkProxyArp 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.38 truthvalue read-only
Proxy Arp configured.
                 tnCNLinkDHCPServer 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.39 truthvalue read-only
DHCP server configured.
                 tnCNLinkDHCPRange 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.40 unsigned32 read-only
DHCP range. Current configurable range: 0 to 10
                 tnCNLinkAdjState 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.41 tropicospfadjacencystatetype read-only
OSPF Adj state.
                 tnCNLinkOscMode 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.42 integer read-only
OSC mode. Enumeration: 'oc3stm1': 1, 'base100FX': 2.
                 tnCNLinkDHCPDfltGtwy 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.43 truthvalue read-only
Indicates if default gateway IP address is distributed via DHCP on this interface.
                 tnCNLinkCitAutoStateCtrl 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.44 truthvalue read-only
false - System is not in auto_state. CIT enable/disable is done by ifAdminStatus. true - System is in auto_state. CIT enable/disable is done by the connectivity status of source_ip. The CIT port will be disabled when the source IP is reachable and enabled when source IP becomes un-reachable. Provisioning of this attribute is restricted to administrators only.
                 tnCNLinkAutoStateSourceIP 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.45 ipaddress read-only
A source IP address that the system shall monitor when tnCNLinkCitAutoStateCtrl is true. This can be the 1350 OMS server address or another IP.
                 tnCNLinkSourceLossCount 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.46 unsigned32 read-only
The number of consecutive retries that tnCNLinkAutoStateSourceIP is un-reachable when tnCNLinkCitAutoStateCtrl is true, which results in CIT port to be auto-enabled. Current configurable range: 5 to 10000.
                 tnCNLinkSourceIPCheckInterval 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.47 unsigned32 read-only
The interval to contact tnCNLinkAutoStateSourceIP when tnCNLinkCitAutoStateCtrl is true. Current configurable range: 10 to 7200.
                 tnCNLinkOspfAuthentType 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.48 integer read-only
Enumeration: 'simple': 2, 'none': 1, 'md5': 3.
                 tnCNLinkOspfAuthKey 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.49 snmpadminstring read-only
                 tnCNLinkOspfAuthKeyId 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.50 unsigned32 read-only
                 tnCNLinkTdmxDcnConf 1.3.6.1.4.1.7483.2.3.1.2.1.1.1.51 integer read-only
Enumeration: 'internal': 1, 'external': 2.
         tnCNLinkViaChannelTable 1.3.6.1.4.1.7483.2.3.1.2.1.2 no-access
This is a read-only table. It provides a secondary way of reading CN Link information.
             tnCNLinkViaChannelEntry 1.3.6.1.4.1.7483.2.3.1.2.1.2.1 no-access
The index has a shelf/slot/port/channel granularity.
                 tnPortIndex 1.3.6.1.4.1.7483.2.3.1.2.1.2.1.1 tropicportindextype no-access
The port portion of the index of the link.
                 tnChannelIndex 1.3.6.1.4.1.7483.2.3.1.2.1.2.1.2 tropicchannelindextype no-access
The channel portion of the index of the link.
                 tnCNLinkViaChannelIfIndex 1.3.6.1.4.1.7483.2.3.1.2.1.2.1.3 interfaceindex read-only
The interface index of the link, a derived value created by the system.
     tnDataNetworkLink 1.3.6.1.4.1.7483.2.3.1.2.2
         tnL1TrafficParamTable 1.3.6.1.4.1.7483.2.3.1.2.2.3 no-access
             tnL1TrafficParamEntry 1.3.6.1.4.1.7483.2.3.1.2.2.3.1 no-access
                 tnL1TrafficParamPerHopBehaviour 1.3.6.1.4.1.7483.2.3.1.2.2.3.1.1 tnperhopbehaviourtype no-access
The value of this object identifies the Class of Service.
                 tnL1TrafficParamBookingFactor 1.3.6.1.4.1.7483.2.3.1.2.2.3.1.2 unsigned32 read-only
                 tnL1TrafficParamMaximumLoad 1.3.6.1.4.1.7483.2.3.1.2.2.3.1.3 unsigned32 read-only
                 tnL1TrafficParamPMF 1.3.6.1.4.1.7483.2.3.1.2.2.3.1.4 unsigned32 read-only
                 tnL1TrafficParamAvailableBandwidth 1.3.6.1.4.1.7483.2.3.1.2.2.3.1.5 unsigned32 read-only
     tnIpRoute 1.3.6.1.4.1.7483.2.3.1.2.4
         tnIpStaticRouteTable 1.3.6.1.4.1.7483.2.3.1.2.4.1 no-access
             tnIpStaticRouteEntry 1.3.6.1.4.1.7483.2.3.1.2.4.1.1 no-access
                 tnIpStaticRouteDest 1.3.6.1.4.1.7483.2.3.1.2.4.1.1.1 ipaddress no-access
                 tnIpStaticRouteMask 1.3.6.1.4.1.7483.2.3.1.2.4.1.1.2 ipaddress no-access
                 tnIpStaticRouteTos 1.3.6.1.4.1.7483.2.3.1.2.4.1.1.3 integer32 no-access
                 tnIpStaticRouteNextHop 1.3.6.1.4.1.7483.2.3.1.2.4.1.1.4 unsigned32 no-access
                 tnIpStaticRouteMetric 1.3.6.1.4.1.7483.2.3.1.2.4.1.1.6 integer32 read-only
Determines which route to be entered in the NE routing table when there are multiple identical routes discovered through different routing protocols. Lower values have higher precedence. Note: If a value of 255 is entered, the route will NOT be installed in the routing table. A value of 255 is used to indicate an Unknown route.
                 tnIpStaticRouteWithRedistribution 1.3.6.1.4.1.7483.2.3.1.2.4.1.1.7 truthvalue read-only
                 tnIpStaticRouteRowStatus 1.3.6.1.4.1.7483.2.3.1.2.4.1.1.8 rowstatus read-only
         tnIpCidrRouteTable 1.3.6.1.4.1.7483.2.3.1.2.4.2 no-access
             tnIpCidrRouteEntry 1.3.6.1.4.1.7483.2.3.1.2.4.2.1 no-access
                 tnIpCidrRouteWithRedistribution 1.3.6.1.4.1.7483.2.3.1.2.4.2.1.1 truthvalue read-only
         tnIpRouteGlobal 1.3.6.1.4.1.7483.2.3.1.2.4.3
             tnIpStaticRouteRedistributeMetricType 1.3.6.1.4.1.7483.2.3.1.2.4.3.1 unsigned32 read-write
Redistribute metric type for static routes. Current configurable range: 1 to 2.
             tnIpStaticRouteRedistributeMetric 1.3.6.1.4.1.7483.2.3.1.2.4.3.2 unsigned32 read-write
Redistribute metric for static routes. Current configurable range: 0 to 16777214.
             tnIpDefaultRouteRedistributeMetricType 1.3.6.1.4.1.7483.2.3.1.2.4.3.3 unsigned32 read-write
Redistribute metric type for the default route. Current configurable range: 1 to 2.
             tnIpDefaultRouteRedistributeMetric 1.3.6.1.4.1.7483.2.3.1.2.4.3.4 unsigned32 read-write
Redistribute metric for the default route. Current configurable range: 0 to 16777214.
             tnIpOspfAreaNumberPPPId 1.3.6.1.4.1.7483.2.3.1.2.4.3.5 integer32 read-write
For all OSC/GCC interfaces, it will use the same OSPF area which can be provisioned to something other than the default 0.0.0.0. Current configurable range: 0 to 3.
     tnSharedRiskGroupObjs 1.3.6.1.4.1.7483.2.3.1.2.5
         tnL1NetworkLink 1.3.6.1.4.1.7483.2.3.1.2.5.1
         tnL1Hop 1.3.6.1.4.1.7483.2.3.1.2.5.2
         tnL1Fiber 1.3.6.1.4.1.7483.2.3.1.2.5.3
         tnL1Conduit 1.3.6.1.4.1.7483.2.3.1.2.5.4
     tnL1Protection 1.3.6.1.4.1.7483.2.3.1.2.6
         tnApsGroupTable 1.3.6.1.4.1.7483.2.3.1.2.6.1 no-access
The automatic protection switch group table.
             tnApsGroupEntry 1.3.6.1.4.1.7483.2.3.1.2.6.1.1 no-access
                 tnApsGroupId 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.1 tnapsgroupid no-access
                 tnApsGroupRowStatus 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.2 rowstatus read-only
                 tnApsGroupDescr 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.3 snmpadminstring read-only
                 tnApsGroupMode 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.4 tropicprotectionlevel read-only
                 tnApsGroupRevert 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.5 integer read-only
Enumeration: 'revertive': 2, 'nonrevertive': 1.
                 tnApsGroupDirection 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.6 integer read-only
Enumeration: 'bidirectional': 2, 'unidirectional': 1.
                 tnApsGroupExtraTraffic 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.7 aluwdmenableddisabled read-only
                 tnApsGroupWaitToRestore 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.8 unsigned32 read-only
Current configurable range: 1 to 20.
                 tnApsGroupK1K2Rcv 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.9 apsk1k2 read-only
                 tnApsGroupK1K2Trans 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.10 apsk1k2 read-only
                 tnApsGroupCurrentStatus 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.11 bits read-only
Bits: 'modeMismatch': 0, 'channelMismatch': 1, 'psbf': 2, 'feplf': 3, 'extraTraffic': 4.
                 tnApsGroupModeMismatches 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.12 counter32 read-only
                 tnApsGroupChannelMismatches 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.13 counter32 read-only
                 tnApsGroupPSBFs 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.14 counter32 read-only
                 tnApsGroupFEPLFs 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.15 counter32 read-only
                 tnApsGroupSwitchedIfIndex 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.16 interfaceindex read-only
                 tnApsGroupMembers 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.17 snmpadminstring read-only
This attribute must be set with the following format: For the 1696R and 1830 PSS-32 single line ported cards: : For the 1830 PSS-1 GBE and MD4H, and 1830 PSS-32 4DAP4A (i.e., all dual-line ported cards): :: The ifIndices must be in decimal ASCII and delimited by a colon. If this format is not followed, the set will fail. This attribute can only be set in conjunction with setting tnApsGroupRowStatus. For a row status of createAndGo: If the ifIndices do not represent protection supported ports, provisioned in the supported slots, the set will be failed. Setting this attribute will result in creating 2 interface entries in table tnApsMemberTable. For a row status of destroy: If both ifIndices are not set to zero, the set will be failed. Setting this attribute will result in deleting 2 interface entries in table tnApsMemberTable. No other row status values are supported with this attribute.
                 tnApsGroupSdEnable 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.18 truthvalue read-only
Indicates whether or not Signal Degrade is used for protection switching.
                 tnApsHoldOffTimer 1.3.6.1.4.1.7483.2.3.1.2.6.1.1.19 unsigned32 read-only
Hold Off Time for automatic switching. Current configurable range: 0 to 10000.
         tnApsMemberTable 1.3.6.1.4.1.7483.2.3.1.2.6.2 no-access
The automatic protection switch group member table.
             tnApsMemberEntry 1.3.6.1.4.1.7483.2.3.1.2.6.2.1 no-access
                 tnApsMemberIfIndex 1.3.6.1.4.1.7483.2.3.1.2.6.2.1.1 interfaceindex no-access
                 tnApsMemberRowStatus 1.3.6.1.4.1.7483.2.3.1.2.6.2.1.2 rowstatus read-only
Changing the row status is currently not supported.
                 tnApsMemberConfigNumber 1.3.6.1.4.1.7483.2.3.1.2.6.2.1.3 integer32 read-only
Currently, only the first two values are used: 0 - Protection 1 - Working The rest of values (2..14) are not used.
                 tnApsMemberSwitch 1.3.6.1.4.1.7483.2.3.1.2.6.2.1.5 integer read-only
The type of protection switch. Enumeration: 'manualSwitchWorkToProtect': 6, 'manualSwitchProtectToWork': 7, 'lockoutOfProtection': 3, 'forcedSwitchWorkToProtect': 4, 'forcedSwitchProtectToWork': 5, 'noCmd': 1, 'clear': 2, 'exercise': 8.
                 tnApsMemberCurrentStatus 1.3.6.1.4.1.7483.2.3.1.2.6.2.1.7 bits read-only
Current protection status. Bits: 'rxStandby': 7, 'switched': 3, 'rxActive': 6, 'txActive': 4, 'lockedOut': 0, 'txStandby': 5, 'sf': 2, 'sd': 1.
         tnPackApsGroupTable 1.3.6.1.4.1.7483.2.3.1.2.6.3 no-access
             tnPackApsGroupEntry 1.3.6.1.4.1.7483.2.3.1.2.6.3.1 no-access
                 tnPackApsGroupID 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.1 unsigned32 no-access
                 tnPackApsGroupRowStatus 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.2 rowstatus read-only
                 tnPackApsGroupWorkIfIndex 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.3 integer32 read-only
The interface Index in the working pack.
                 tnPackApsGroupProtIfIndex 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.4 integer32 read-only
The interface Index in the protection pack.
                 tnPackApsGroupDescr 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.5 snmpadminstring read-only
Description for the APS group.
                 tnPackApsGroupRevert 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.6 integer read-only
The revertive attribute of the APS group. Enumeration: 'revertive': 2, 'nonrevertive': 1.
                 tnPackApsGroupDirection 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.7 integer read-only
The protection direction of the APS Group.Only Unidirection Enumeration: 'bidirectional': 2, 'unidirectional': 1.
                 tnPackApsGroupWaitToRestore 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.8 unsigned32 read-only
The wait-to-restore time for the revertive mode automatic switching. The values are in minutes. Current configurable range: 1 to 15.
                 tnPackApsGroupHoldOffTimer 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.9 unsigned32 read-only
Hold Off Time for automatic switching. Current configurable range: 0 to 10000.
                 tnPackApsGroupSwitchCmd 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.10 integer read-only
The switch command applied to the APS group. Enumeration: 'manualSwitchWorkToProtect': 6, 'manualSwitchProtectToWork': 7, 'lockoutOfProtection': 3, 'forcedSwitchWorkToProtect': 4, 'forcedSwitchProtectToWork': 5, 'noCmd': 1, 'clear': 2.
                 tnPackApsGroupActSide 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.11 integer read-only
Active side in the Pack APS group. Enumeration: 'protection': 2, 'working': 1.
                 tnPackApsGroupCurrentStatus 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.12 integer read-only
Currently Group Status for a Pack APS. Enumeration: 'rxStandby': 7, 'switched': 3, 'rxActive': 6, 'txActive': 4, 'txStandby': 5, 'sf': 2, 'sd': 1.
                 tnPackApsGroupWorkStatus 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.13 integer read-only
The status of the working pack in the APS group. Enumeration: 'none': 3, 'sf': 1, 'sd': 2.
                 tnPackApsGroupProtStatus 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.14 integer read-only
The status of the protection pack in the APS group. Enumeration: 'none': 3, 'sf': 1, 'sd': 2.
                 tnPackApsGroupPortFailEnable 1.3.6.1.4.1.7483.2.3.1.2.6.3.1.15 truthvalue read-only
Indicates whether or not Port fail is used for protection switching.
     tnIpTunnel 1.3.6.1.4.1.7483.2.3.1.2.7
     tnControlNetworkMap 1.3.6.1.4.1.7483.2.3.1.2.8
         tnControlNetworkMapTable 1.3.6.1.4.1.7483.2.3.1.2.8.1 no-access
The control network map table.
             tnControlNetworkMapEntry 1.3.6.1.4.1.7483.2.3.1.2.8.1.1 no-access
The Control Network map entry. This is the information on the neighbors of this NE.
                 tnCNMapTableIndex 1.3.6.1.4.1.7483.2.3.1.2.8.1.1.1 unsigned32 no-access
The index into the map table.
                 tnCNMapIpAddress 1.3.6.1.4.1.7483.2.3.1.2.8.1.1.2 ipaddress read-only
The IP address of the node.
                 tnCNMapNeName 1.3.6.1.4.1.7483.2.3.1.2.8.1.1.3 octet string read-only
The name of the node.
                 tnCNMapSoftwareRelease 1.3.6.1.4.1.7483.2.3.1.2.8.1.1.4 octet string read-only
The software release of the node.
     tnNetworkInterface 1.3.6.1.4.1.7483.2.3.1.2.9
         tnNetIfTable 1.3.6.1.4.1.7483.2.3.1.2.9.1 no-access
The network interface table.
             tnNetIfEntry 1.3.6.1.4.1.7483.2.3.1.2.9.1.1 no-access
.
                 tnNetIfIndex 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.1 unsigned32 no-access
Access identifier for the Network Interface Index.
                 tnNetIfTypeOfOperation 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.2 aluwdmtypeofnetifoperation read-only
Create, delete, or modify a network interface instance over an ECC.
                 tnNetIfStatus 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.3 integer read-only
Administrative status of the network interface. Enumeration: 'enable': 1, 'disable': 2.
                 tnNetIfPacketType 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.4 integer read-only
GCC packet type, which indicates if the NETIF packet type is standard (std) or non-standard (nonstd). Only provisionable for 4DPA4, 11DPE12, 11STAR1, and 11STMM10 pack related NETIFs. If tnNetIfPacketType is std, tnNetIfMtu can be changed. If tnNetIfPacketType is nonStd, tnNetIfMtu is always the default value and cannot be changed. Changing tnNetIfPacketType from std to nonStd results in tnNetIfMtu of the NETIF being changed to the default value. Default: nonstd for 4DPA4, 11DPE12, 11STAR1, and 11STMM10. std for all others. Enumeration: 'std': 1, 'non-std': 2.
                 tnNetIfMtu 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.5 integer32 read-only
Maximum Transmission Unit size, in units of bytes. This attribute can only be changed if tnNetIfPacketType is std. Current configurable range: 576 to 1500. Default: 1473 for 4DPA4, 11DPE12, 11STAR1, and 11STMM10. 1500 for all others.
                 tnNetIfHelloInterval 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.6 unsigned32 read-only
Specifies the hello interval for the interface. The Hello interval specifies how often (in seconds) a hello packet is sent out on the interface. Hello packets are used to establish and maintain relationships with neighboring network elements. Current configurable range: 1 to 65535.
                 tnNetIfRtrDeadInterval 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.7 unsigned32 read-only
OSPF Router Dead Interval of the interface. This is the time elapsed between not hearing a router's Hello PDU before the interface OSPF state is declared down. The dead interval is a timer used to timeout inactive adjacencies. The dead interval value should always be greater than the hello interval value. By default, the interface shall be set to four times the value of the HELLOINT, so the default is 40 seconds. Current configurable range: 1 to 65535.
                 tnNetIfMetric 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.8 unsigned32 read-only
OSPF Metric or Cost of the interface. The lower the cost, the more preferred the interface is for the routing of packets. Current configurable range: 1 to 65535. Default: 14 for ODU4/OTU4 NETIF 18 for ODU3e2/OTU3e2 NETIF 20 for ODU3/OTU3 NETIF 28 for ODU2e/OTU2e NETIF 30 for ODU2/OTU2 NETIF 40 for ODU1/OTU1 NETIF.
                 tnNetIfOspfAuthentType 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.9 integer read-only
Specifies OSPF authentication on the interface - only none and MD5 are currently supported. Enumeration: 'simple': 2, 'none': 1, 'md5': 3.
                 tnNetIfOspfAuthKey 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.10 octet string read-only
Key used for OSPF MD5 128 bit hash value key calculation on the interface. The string shall be 0 to 16 uppercase or lowercase alphanumeric characters.
                 tnNetIfOspfAuthKeyId 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.11 unsigned32 read-only
Key used for OSPF MD5 128 bit hash value key calculation on the interface. Current configurable range: 1 to 255.
                 tnNetIfCnLinkAdjState 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.12 tropicospfadjacencystatetype read-only
NETIF OSPF adjacency state.
                 tnNetIfMtuNeg 1.3.6.1.4.1.7483.2.3.1.2.9.1.1.13 integer32 read-only
The actual (negotiated) Maximum Transmission Unit size,in units of bytes with default value -1, when the MTU size has not yet been negotiated. The default value -1 should be interpreted by UIs as '-'.
         tnNetIfFacilityTable 1.3.6.1.4.1.7483.2.3.1.2.9.2 no-access
The Network interface facility table.
             tnNetIfFacilityEntry 1.3.6.1.4.1.7483.2.3.1.2.9.2.1 no-access
.
                 tnNetIfFacilityIfIndex 1.3.6.1.4.1.7483.2.3.1.2.9.2.1.1 unsigned32 no-access
The facility carrying the ECC. The format of the first 32 bits of the 64 index is as follows: 8 8 1 13 2 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | shelf | slot |0| port/hoOdu/oduptf |dir| +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ tnNetIfFacilityIfIndexLo (below) is the next 32 bits of the 64 bit index. Refer to the 1830 PSS R6.0 XCOM RRS for valid values of facility and shelf and slot and port ranges for each supported circuit pack type.
                 tnNetIfFacilityIfIndexLo 1.3.6.1.4.1.7483.2.3.1.2.9.2.1.2 unsigned32 no-access
The facility carrying the ECC. tnNetIfFacilityIfIndex (above) is the first 32 bits of the 64 bit index. The format of the second 32 bit of the index is as follows: 9 3 2 2 4 6 6 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | loOdu/optsg | tcm |pos|res|facType| subFac | 25 | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Refer to the 1830 PSS R6.0 XCOM RRS for valid values of facility and shelf and slot and port ranges for each supported circuit pack type.
                 tnNetIfFacilityTypeOfOperation 1.3.6.1.4.1.7483.2.3.1.2.9.2.1.3 aluwdmtypeofnetifoperation read-only
Create, delete, or modify the facility information of a network interface instance.
                 tnNetIfFacilityEccChanType 1.3.6.1.4.1.7483.2.3.1.2.9.2.1.4 integer read-only
Specifies the ECC type of the referred ECC channel. Default: gcc0 if NETIF addresses an OTU gcc1 if NETIF addresses an ODU. Refer to the 1830 PSS R6.0 XCOM RRS for valid values of eccchnl supported on facility and shelf and slot and port ranges for each supported circuit pack type. Enumeration: 'gcc2': 3, 'gcc1': 2, 'gcc0': 1.