TRANGOM5800S-MIB: View SNMP OID List / Download MIB

VENDOR: TRANGO NETWORKS, LLC


 Home MIB: TRANGOM5800S-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 trango 1.3.6.1.4.1.5454
           tbw 1.3.6.1.4.1.5454.1
               m5800sap 1.3.6.1.4.1.5454.1.10
                     apsystem 1.3.6.1.4.1.5454.1.10.1
                         apversion 1.3.6.1.4.1.5454.1.10.1.1
                             apsysHW 1.3.6.1.4.1.5454.1.10.1.1.1 octet string read-only
Hardware version.
                             apsysFW 1.3.6.1.4.1.5454.1.10.1.1.2 displaystring read-only
Main firmware version. Format: HD.
                             apsysFPGA 1.3.6.1.4.1.5454.1.10.1.1.3 octet string read-only
FPGA firmware version.
                             apsysChecksum 1.3.6.1.4.1.5454.1.10.1.1.4 octet string read-only
AP firmware checksum.
                         apsysDeviceId 1.3.6.1.4.1.5454.1.10.1.2 octet string read-only
MAC address.
                         apsysBaseId 1.3.6.1.4.1.5454.1.10.1.3 integer read-write
Cluster that the AP belongs to. All APs and SUs in the same cluster shall have the same Base ID.
                         apsysAPId 1.3.6.1.4.1.5454.1.10.1.4 integer read-write
AP ID. Each AP in a cluster shall have unique AP ID.
                         apsysDefOpMode 1.3.6.1.4.1.5454.1.10.1.5 integer read-write
The operation mode (ap or off) the radio is on after reboot/power cycle. Enumeration: 'ap': 1, 'off': 0.
                         apsysCurOpMode 1.3.6.1.4.1.5454.1.10.1.6 integer read-only
Radio's current operation mode. Enumeration: 'ap': 1, 'off': 0.
                         apsysActivateOpmode 1.3.6.1.4.1.5454.1.10.1.7 integer read-write
Engage AP unit to ap operation mode. Enumeration: 'deactivated': 0, 'activateapmode': 1.
                         apsysIPAddr 1.3.6.1.4.1.5454.1.10.1.8 ipaddress read-write
IP address.
                         apsysSubnet 1.3.6.1.4.1.5454.1.10.1.9 ipaddress read-write
Subnet mask.
                         apsysDefaultGateway 1.3.6.1.4.1.5454.1.10.1.10 ipaddress read-write
Default gateway.
                         apsysReadCommStr 1.3.6.1.4.1.5454.1.10.1.11 displaystring read-write
SNMP agent read community string. It is used for authentication purpose.
                         apsysWriteCommStr 1.3.6.1.4.1.5454.1.10.1.12 displaystring read-write
SNMP agent write community string. It is used for authentication purpose.
                         apswitches 1.3.6.1.4.1.5454.1.10.1.13
                               apsysBlockBroadcastMulticast 1.3.6.1.4.1.5454.1.10.1.13.1 integer read-write
This switch enables or disables the blocking of Ethernet control packet except ICMP and ARP to reduce the amount of uneccessary overhead introduced to the wireless link. Enumeration: 'passed': 0, 'blocked': 1.
                               apsysSUtoSU 1.3.6.1.4.1.5454.1.10.1.13.2 integer read-write
This switch enables or disables the peer-to-peer feature among SUs through the AP. Before this switch is turned on, all SUs that want to communicate with each other have to be assigned to the same group. Enumeration: 'disabled': 0, 'enabled': 1.
                               apsysTFTPD 1.3.6.1.4.1.5454.1.10.1.13.4 integer read-write
This switch enables or disables the TFTP operation. When it is turned on, then the AP will be ready for code download. Enumeration: 'disabled': 0, 'enabled': 1.
                               apsysHTTPD 1.3.6.1.4.1.5454.1.10.1.13.5 integer read-write
When it is turned on, then the AP is accessible for configuring via web browser (e.g. IE or Nescape). Enumeration: 'disabled': 0, 'enabled': 1.
                         apsysMIRThreshold 1.3.6.1.4.1.5454.1.10.1.14 integer read-write
Maximum Information Rate (in Kbps), the AP allows the network to utilize before enforcing CIR on each subscriber. Enumeration: 'sixmbps': 6, 'disabled': 0, 'fourmbps': 4, 'sevenmbps': 7, 'eightmbps': 8, 'fivembps': 5.
                         aptraffic 1.3.6.1.4.1.5454.1.10.1.15
                               apsysEthRxAvgThroughputLog 1.3.6.1.4.1.5454.1.10.1.15.1 integer read-only
Average payload data throughput (in Kbits/sec) received on Ethernet port over the last 60 seconds.
                               apsysEthTxAvgThroughputLog 1.3.6.1.4.1.5454.1.10.1.15.2 integer read-only
Average payload data throughput (in Kbits/sec) transmitted on Ethernet port over the last 60 seconds.
                               apsysRfRxAvgThroughputLog 1.3.6.1.4.1.5454.1.10.1.15.3 integer read-only
Average payload data throughput (in Kbits/sec) received on RF port over the last 60 seconds.
                               apsysRfTxAvgThroughputLog 1.3.6.1.4.1.5454.1.10.1.15.4 integer read-only
Average payload data throughput (in Kbits/sec) transmitted on RF port over the last 60 seconds.
                               apsysEthInOctets 1.3.6.1.4.1.5454.1.10.1.15.5 counter read-only
Number of payload octets received on Ethernet port.
                               apsysEthOutOctets 1.3.6.1.4.1.5454.1.10.1.15.6 counter read-only
Number of payload octets transmitted on Ethernet port.
                               apsysRfInOctets 1.3.6.1.4.1.5454.1.10.1.15.7 counter read-only
Number of octets of SUs payload received from RF port.
                               apsysRfOutOctets 1.3.6.1.4.1.5454.1.10.1.15.8 counter read-only
Number of octets of SUs payload transmitted to RF port.
                         apsysTemperature 1.3.6.1.4.1.5454.1.10.1.16 integer read-only
Current AP temperature value (in Celsius).
                         apsysUpdateFlashAndActivate 1.3.6.1.4.1.5454.1.10.1.17 integer read-write
Save system setting values to Flash and activate the settings. Enumeration: 'yes': 1, 'no': 0.
                         apsysReboot 1.3.6.1.4.1.5454.1.10.1.18 integer read-write
Reboot the radio. Enumeration: 'deactivated': 0, 'activated': 1.
                     aprf 1.3.6.1.4.1.5454.1.10.2
                         aprfActiveChannel 1.3.6.1.4.1.5454.1.10.2.1 integer read-write
It specifies the current channel number the radio operates on.
                         aprfActivePolarization 1.3.6.1.4.1.5454.1.10.2.2 displaystring read-write
It specifies the current polarization the radio operates on.
                         aprftable 1.3.6.1.4.1.5454.1.10.2.3
                             aprfChannel1 1.3.6.1.4.1.5454.1.10.2.3.1 integer read-write
RF channel 1 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel2 1.3.6.1.4.1.5454.1.10.2.3.2 integer read-write
RF channel 2 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel3 1.3.6.1.4.1.5454.1.10.2.3.3 integer read-write
RF channel 3 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel4 1.3.6.1.4.1.5454.1.10.2.3.4 integer read-write
RF channel 4 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel5 1.3.6.1.4.1.5454.1.10.2.3.5 integer read-write
RF channel 5 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel6 1.3.6.1.4.1.5454.1.10.2.3.6 integer read-write
RF channel 6 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel7 1.3.6.1.4.1.5454.1.10.2.3.7 integer read-write
RF channel 7 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel8 1.3.6.1.4.1.5454.1.10.2.3.8 integer read-write
RF channel 8 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel9 1.3.6.1.4.1.5454.1.10.2.3.9 integer read-write
RF channel 9 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel10 1.3.6.1.4.1.5454.1.10.2.3.10 integer read-write
RF channel 10 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel11 1.3.6.1.4.1.5454.1.10.2.3.11 integer read-write
RF channel 11 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel12 1.3.6.1.4.1.5454.1.10.2.3.12 integer read-write
RF channel 12 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel13 1.3.6.1.4.1.5454.1.10.2.3.13 integer read-write
RF channel 13 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel14 1.3.6.1.4.1.5454.1.10.2.3.14 integer read-write
RF channel 14 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel15 1.3.6.1.4.1.5454.1.10.2.3.15 integer read-write
RF channel 15 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel16 1.3.6.1.4.1.5454.1.10.2.3.16 integer read-write
RF channel 16 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel17 1.3.6.1.4.1.5454.1.10.2.3.17 integer read-write
RF channel 17 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel18 1.3.6.1.4.1.5454.1.10.2.3.18 integer read-write
RF channel 18 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel19 1.3.6.1.4.1.5454.1.10.2.3.19 integer read-write
RF channel 19 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel20 1.3.6.1.4.1.5454.1.10.2.3.20 integer read-write
RF channel 20 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel21 1.3.6.1.4.1.5454.1.10.2.3.21 integer read-write
RF channel 21 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel22 1.3.6.1.4.1.5454.1.10.2.3.22 integer read-write
RF channel 22 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel23 1.3.6.1.4.1.5454.1.10.2.3.23 integer read-write
RF channel 23 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel24 1.3.6.1.4.1.5454.1.10.2.3.24 integer read-write
RF channel 24 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel25 1.3.6.1.4.1.5454.1.10.2.3.25 integer read-write
RF channel 25 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel26 1.3.6.1.4.1.5454.1.10.2.3.26 integer read-write
RF channel 26 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel27 1.3.6.1.4.1.5454.1.10.2.3.27 integer read-write
RF channel 27 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel28 1.3.6.1.4.1.5454.1.10.2.3.28 integer read-write
RF channel 28 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel29 1.3.6.1.4.1.5454.1.10.2.3.29 integer read-write
RF channel 29 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                             aprfChannel30 1.3.6.1.4.1.5454.1.10.2.3.30 integer read-write
RF channel 30 frequency (in MHz). It allows you to create your own channel instead of the manufacturing defaults in the AP. Keep in mind that channel width is 20MHz, and the frequency specified here is the center frequency. Frequency (5260MHz - 5340MHz) is only applicable to M5830S radio.
                         apism 1.3.6.1.4.1.5454.1.10.2.4
                             aprfismTxPowerMax 1.3.6.1.4.1.5454.1.10.2.4.1 integer read-only
The maximum ISM Tx power value can be set (in dBm).
                             aprfismTxPowerMin 1.3.6.1.4.1.5454.1.10.2.4.2 integer read-only
The minimum ISM Tx power value can be set (in dBm).
                             aprfismTxPower 1.3.6.1.4.1.5454.1.10.2.4.3 integer read-write
ISM RF tx power (in dBm). It specifies the power output of the radio, excluding the antenna gain. Check parameters aprfismTxPowerMax and aprfismTxPowerMin for power setting range.
                             aprfismServiceRadius 1.3.6.1.4.1.5454.1.10.2.4.4 integer read-write
ISM RF service radius (in mile). It specifies the distance of the furthest SU the AP will serve. Based on this information, the AP will determine the maximum wait time for a SU to response to a poll before it starts to poll the next one. Enumeration: 'tenmiles': 10, 'threemiles': 3, 'thirtymiles': 20.
                             aprfismRxThreshold 1.3.6.1.4.1.5454.1.10.2.4.5 integer read-write
ISM RF rx threshold (in dBm). It specifies the receiver sensitivity of the AP. By default, the radio's sensitivity is -82dBm. The higher the threshold is, the less sensitive the radio will be. In M5800S, the value -90 represents the rfrxthreshold is disabled.
                             aprfismTargetRSSI 1.3.6.1.4.1.5454.1.10.2.4.6 integer read-write
ISM RF target RSSI (in dBm). It specifies the target RSSI from all SUs to the AP. Based on this parameter, the AP can power level each SU so that it receives same level of signal strength from all SUs, regardless far or near. Note that when you set the Target RSSI from SU, you need to consider AP's RF Rx Threshold value. The Target RSSI from SU must be 5dB higher than the RF Rx Threshold. When the RF Rx Threshold is disabled, the setting of the Target RSSI from SU shall be no less than -75dBm.
                         apunii 1.3.6.1.4.1.5454.1.10.2.5
                             aprfuniiTxPowerMax 1.3.6.1.4.1.5454.1.10.2.5.1 integer read-only
This object is only applicable to M5830S radio. The maximum UNII Tx power value can be set (in dBm).
                             aprfuniiTxPowerMin 1.3.6.1.4.1.5454.1.10.2.5.2 integer read-only
This object is only applicable to M5830S radio. The minimum UNII Tx power value can be set (in dBm).
                             aprfuniiTxPower 1.3.6.1.4.1.5454.1.10.2.5.3 integer read-write
This object is only applicable to M5830S radio. UNII RF tx power (in dBm). It specifies the power output of the radio, excluding the antenna gain. Check parameters aprfuniiTxPowerMax and aprfuniiTxPowerMin for power setting range.
                             aprfuniiServiceRadius 1.3.6.1.4.1.5454.1.10.2.5.4 integer read-write
This object is only applicable to M5830S radio. UNII RF service radius (in mile). It specifies the distance of the furthest SU the AP will serve. Based on this information, the AP will determine the maximum wait time for a SU to response to a poll before it starts to poll the next one. Enumeration: 'twomiles': 2, 'fourmiles': 4, 'threemiles': 3.
                             aprfuniiRxThreshold 1.3.6.1.4.1.5454.1.10.2.5.5 integer read-write
This object is only applicable to M5830S radio. UNII RF rx threshold (in dBm). It specifies the receiver sensitivity of the AP.
                             aprfuniiTargetRSSI 1.3.6.1.4.1.5454.1.10.2.5.6 integer read-write
This object is only applicable to M5830S radio. UNII RF target RSSI (in dBm). It specifies the target RSSI from all SUs to the AP. Based on this parameter, the AP can power level each SU so that it receives same level of signal strength from all SUs, regardless far or near. Note that when you set the Target RSSI from SU, you need to consider AP's RF Rx Threshold value. The Target RSSI from SU must be 5dB higher than the RF Rx Threshold.
                     su 1.3.6.1.4.1.5454.1.10.3
                         suSUCount 1.3.6.1.4.1.5454.1.10.3.1 integer read-only
Number of subscriber units in the subscriber database.
                         suPowerLvlAll 1.3.6.1.4.1.5454.1.10.3.2 integer read-write
It is a feature that is typically found in more elaborate mobile systems such as cellular CDMA networks. Using this feature, all SUs have their RF power output adjusted until the signal strength for each SU as received in the AP is roughly the same. Enumeration: 'deactivated': 0, 'activated': 1.
                         suStatisticsSamplePeriod 1.3.6.1.4.1.5454.1.10.3.3 integer read-write
A period (in minute) AP requests update on SU Info Table from all associated SUs.
                         suRebootAll 1.3.6.1.4.1.5454.1.10.3.4 integer read-write
AP broadcasts reboot command to all subscriber units. Enumeration: 'deactivated': 0, 'activated': 1.
                         sudb 1.3.6.1.4.1.5454.1.10.3.5
                             suAddOrDeleteID 1.3.6.1.4.1.5454.1.10.3.5.1 integer read-write
Subscriber unit ID (1..8190). Each subscriber in a sector shall have a unique ID.
                             suAddMAC 1.3.6.1.4.1.5454.1.10.3.5.2 octet string read-write
It is the MAC address of the subscriber unit, which can be found on the back of the SU.
                             suAddPolling 1.3.6.1.4.1.5454.1.10.3.5.3 integer read-write
It is service level value, regular or priority, of a SU. The AP will poll priority user more often, thus better network latency as the result. As the network latency varies based on the number of subscriber units the AP serves, priority user is guaranteed that the latency is NOT greater than 100ms regardless of the size of the network. Enumeration: 'priority': 5, 'regular': 1.
                             suAddSUtoSU 1.3.6.1.4.1.5454.1.10.3.5.4 integer read-write
It is peer-to-peer group this SU belongs to. With the SU to SU switch is turned on, SUs in the same peer-to-peer group can communicate to each other via the AP. There are totally 15 groups available. Note that the SU shall be set to priority user for this feature to improve latency. Enumeration: 'groupE': 14, 'groupD': 13, 'groupF': 15, 'groupA': 10, 'groupC': 12, 'groupB': 11, 'group5': 5, 'group4': 4, 'group7': 7, 'group6': 6, 'group1': 1, 'nullgroup': 0, 'group3': 3, 'group2': 2, 'group9': 9, 'group8': 8.
                             suAddCIR 1.3.6.1.4.1.5454.1.10.3.5.5 integer read-write
It is the Committed Information Rate (in Kbps) the AP allocates to SU.
                             suAddMIR 1.3.6.1.4.1.5454.1.10.3.5.6 integer read-write
It is the Maximum Information Rate (in Kbps) the AP allocates to SU.
                             suAdd 1.3.6.1.4.1.5454.1.10.3.5.7 integer read-write
Add a subscriber (specified in object suAddOrDeleteID) to the subscriber database. Enumeration: 'deactivated': 0, 'add': 1.
                             suDelete 1.3.6.1.4.1.5454.1.10.3.5.8 integer read-write
Delete a subscriber (specified in object suAddOrDeleteID) from the subscriber database. Enumeration: 'deactivated': 0, 'delete': 1.
                         suInfoTable 1.3.6.1.4.1.5454.1.10.3.6 no-access
A table that contains subscriber unit entities.
                             suInfoEntry 1.3.6.1.4.1.5454.1.10.3.6.1 no-access
Information about a specific subscriber unit retrieved by its ID number.
                                 suID 1.3.6.1.4.1.5454.1.10.3.6.1.1 integer read-only
Subscriber unit ID. Each subscriber in a sector shall have a unique ID.
                                 suMAC 1.3.6.1.4.1.5454.1.10.3.6.1.2 octet string read-only
Subscriber unit MAC Address. Format: 00 01 DE xx xx xx.
                                 suPolling 1.3.6.1.4.1.5454.1.10.3.6.1.3 integer read-only
It is service level value, regular or priority, of a SU. The AP will poll priority user more often, thus better network latency as the result. As the network latency varies based on the number of subscriber units the AP serves, priority user is guaranteed that the latency is NOT greater than 100ms regardless of the size of the network. Enumeration: 'priority': 5, 'regular': 1.
                                 suSUtoSU 1.3.6.1.4.1.5454.1.10.3.6.1.4 integer read-only
It is peer-to-peer group this SU belongs to. With the SU to SU switch is turned on, SUs in the same peer-to-peer group can communicate to each other via the AP. There are totally 15 groups available. Note that the SU shall be set to priority user for this feature to improve latency. Enumeration: 'groupE': 14, 'groupD': 13, 'groupF': 15, 'groupA': 10, 'groupC': 12, 'groupB': 11, 'group5': 5, 'group4': 4, 'group7': 7, 'group6': 6, 'group1': 1, 'nullgroup': 0, 'group3': 3, 'group2': 2, 'group9': 9, 'group8': 8.
                                 suCIR 1.3.6.1.4.1.5454.1.10.3.6.1.5 integer read-only
It is the Committed Information Rate (in Kbps) the AP allocates to SU.
                                 suMIR 1.3.6.1.4.1.5454.1.10.3.6.1.6 integer read-only
It is the Maximum Information Rate (in Kbps) the AP allocates to SU.
                                 suIPAddr 1.3.6.1.4.1.5454.1.10.3.6.1.7 ipaddress read-only
Subscriber unit IP Address.
                                 suRemarks 1.3.6.1.4.1.5454.1.10.3.6.1.8 displaystring read-only
Subscriber unit Remark.
                                 suHWVer 1.3.6.1.4.1.5454.1.10.3.6.1.9 octet string read-only
Subscriber unit Hardware Version.
                                 suFWVer 1.3.6.1.4.1.5454.1.10.3.6.1.10 displaystring read-only
Subscriber unit main firmware version.
                                 suFPGAVer 1.3.6.1.4.1.5454.1.10.3.6.1.11 octet string read-only
Subscriber unit FPGA firmware version.
                                 suChecksum 1.3.6.1.4.1.5454.1.10.3.6.1.12 octet string read-only
Subscriber unit firmware checksum.
                                 suAssociation 1.3.6.1.4.1.5454.1.10.3.6.1.13 integer read-only
Subscriber unit association status. Enumeration: 'notAssociated': 0, 'associated': 1.
                                 suDIstance 1.3.6.1.4.1.5454.1.10.3.6.1.14 integer read-only
Distance of SU (in mile).
                                 suRSSIFromSU 1.3.6.1.4.1.5454.1.10.3.6.1.15 integer read-only
Subscriber unit RSSI from SU (in dBm).
                                 suRSSIFromAP 1.3.6.1.4.1.5454.1.10.3.6.1.16 integer read-only
Subscriber unit RSSI from AP (in dBm).
                                 suTxPower 1.3.6.1.4.1.5454.1.10.3.6.1.17 integer read-only
Subscriber unit Tx Power Level (in dBm).
                                 suEthRxAvgThroughputLog 1.3.6.1.4.1.5454.1.10.3.6.1.18 integer read-only
Average payload data throughput (in Kbits/sec) received on the Ethernet port over the period specified by suStatisticsSamplePeriod.
                                 suEthTxAvgThroughputLog 1.3.6.1.4.1.5454.1.10.3.6.1.19 integer read-only
Average payload data throughput (in Kbits/sec) transmitted on the Ethernet port over the period specified by suStatisticsSamplePeriod.
                                 suRfRxAvgThroughputLog 1.3.6.1.4.1.5454.1.10.3.6.1.20 integer read-only
Average payload data throughput (in Kbits/sec) received on the RF port over the period specified by suStatisticsSamplePeriod.
                                 suRfTxAvgThroughputLog 1.3.6.1.4.1.5454.1.10.3.6.1.21 integer read-only
Average payload data throughput (in Kbits/sec) transmitted on the RF port over the period specified by suStatisticsSamplePeriod.
                                 suRfInOctets 1.3.6.1.4.1.5454.1.10.3.6.1.22 counter read-only
Number of payload octets received on the RF port.
                                 suRfOutOctets 1.3.6.1.4.1.5454.1.10.3.6.1.23 counter read-only
Number of payload octets transmitted on the RF port.
                                 suPowerLevel 1.3.6.1.4.1.5454.1.10.3.6.1.24 integer read-write
It is a feature that is typically found in more elaborate mobile systems such as cellular CDMA networks. Using this feature, the SU has its RF power output adjusted until its signal strength received in the AP is roughly the same. Enumeration: 'deactivated': 0, 'activated': 1.
                                 suTemperature 1.3.6.1.4.1.5454.1.10.3.6.1.25 integer read-only
Subscriber Unit temperature reading value (in Celsius).
                                 suReboot 1.3.6.1.4.1.5454.1.10.3.6.1.26 integer read-write
AP issues reboot command to a specific subscriber unit. Enumeration: 'deactivated': 0, 'activated': 1.
                     trapconfig 1.3.6.1.4.1.5454.1.10.4
                         aptrpCount 1.3.6.1.4.1.5454.1.10.4.1 integer read-only
Types of trap.
                         aptrpDest1IPAddress 1.3.6.1.4.1.5454.1.10.4.2 ipaddress read-write
Trap destination 1 IP address.
                         aptrpDest2IPAddress 1.3.6.1.4.1.5454.1.10.4.3 ipaddress read-write
Trap destination 2 IP address.
                         aptrpTable 1.3.6.1.4.1.5454.1.10.4.4 no-access
A table that contains information of Trango trap events .
                             aptrpEntry 1.3.6.1.4.1.5454.1.10.4.4.1 no-access
Information about a specific Trango trap event.
                                 aptrpIndex 1.3.6.1.4.1.5454.1.10.4.4.1.1 integer read-only
Trap index.
                                 aptrpID 1.3.6.1.4.1.5454.1.10.4.4.1.2 integer read-only
Specific trap ID.
                                 aptrpCommStr 1.3.6.1.4.1.5454.1.10.4.4.1.3 displaystring read-write
Specific trap community string.
                                 aptrpEnable 1.3.6.1.4.1.5454.1.10.4.4.1.4 integer read-write
Enable a specific Trango trap event or not. Enumeration: 'disabled': 0, 'enabled': 1.
                     mibinfo 1.3.6.1.4.1.5454.1.10.5
                         mibinfoVersion 1.3.6.1.4.1.5454.1.10.5.1 displaystring read-only
Trango MIB Version.
                     m5800straps 1.3.6.1.4.1.5454.1.10.16
                             suLinkUp 1.3.6.1.4.1.5454.1.10.160.7
The SNMP trap that is generated when a specific SU Associated.
                             suLinkDown 1.3.6.1.4.1.5454.1.10.160.8
The SNMP trap that is generated when a specific SU Powered Off.
                             apOpModeFailure 1.3.6.1.4.1.5454.1.10.160.9
The SNMP trap that is generated when a specific AP not being in ap mode during boot up sequence.