TPLINK-QOS-MIB: View SNMP OID List / Download MIB

VENDOR: TP-LINK


 Home MIB: TPLINK-QOS-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 tplinkQosMIB 1.3.6.1.4.1.11863.6.22
Private MIB for system time configuration.
       tplinkQosMIBObjects 1.3.6.1.4.1.11863.6.22.1
           tplinkQosBasicConfig 1.3.6.1.4.1.11863.6.22.1.1
               tpQosBasicConfigTable 1.3.6.1.4.1.11863.6.22.1.1.1 no-access
A list of qos basic config entries. Here you can configure the port priority.
                   tpQosBasicConfigEntry 1.3.6.1.4.1.11863.6.22.1.1.1.1 no-access
An entry contains of the information of qos basic config.
                       tpQosBasicConfigPort 1.3.6.1.4.1.11863.6.22.1.1.1.1.1 displaystring read-only
The physical port number of the switch.
                       tpQosBasicConfigPri 1.3.6.1.4.1.11863.6.22.1.1.1.1.2 integer read-write
0. Cos0 1. Cos1 2. Cos2 3. Cos3 4. Cos4 5. Cos5 6. Cos6 7. Cos7 Specify the priority for the port. Enumeration: 'cos7': 7, 'cos6': 6, 'cos5': 5, 'cos4': 4, 'cos3': 3, 'cos2': 2, 'cos1': 1, 'cos0': 0.
                       tpQosBasicConfigLag 1.3.6.1.4.1.11863.6.22.1.1.1.1.3 octet string read-only
The LAG number which the port belongs to.
           tplinkQosScheduler 1.3.6.1.4.1.11863.6.22.1.2
               tpQosSchedulerConfig 1.3.6.1.4.1.11863.6.22.1.2.1 integer read-write
Here you can select the schedule mode for the switch. 0. SP-Mode: Strict-Priority Mode. In this mode, the queue with higher priority will occupy the whole bandwidth. Packets in the queue with lower priority are sent only when the queue with higher priority is empty. 1. WRR-Mode: Weight Round Robin Mode. In this mode, packets in all the queues are sent in order based on the weight value for each queue. You can also config the TC queues' weight with values 1-127. 2. SP+WRR-Mode: Strict-Priority + Weight Round Robin Mode. In this mode, this switch provides two scheduling groups, SP group and WRR group. Queues in SP group and WRR group are scheduled strictly based on strict-priority mode while the queues inside WRR group follow the WRR mode. In SP+WRR mode, the largest TC queue is in the SP group and the others belong to the WRR group and You can also config the TC queues' weight with values 0-127, value 0 means this TC queue is in SP group. In this way, when scheduling queues, the switch allows TC queues in SP group to occupy the whole bandwidth following the SP mode and the other TC queues in the WRR group will take up the bandwidth according to their ratio. 3. Equ-Mode: Equal-Mode. In this mode, all the queues occupy the bandwidth equally. Enumeration: 'wrr-mode': 1, 'sp-wrr-mode': 2, 'sp-mode': 0, 'equ-mode': 3.
               tpQosSchedulerWeightTable 1.3.6.1.4.1.11863.6.22.1.2.2 no-access
A table of the information of qos scheduler queue weight.
                   tpQosSchedulerWeightEntry 1.3.6.1.4.1.11863.6.22.1.2.2.1 no-access
An entry contains of the information of qos scheduler queue weight config.
                       tpQosSchedulerTc 1.3.6.1.4.1.11863.6.22.1.2.2.1.1 integer read-only
Indicates the priority level the packets go egress. The priority levels are labeled as TC. Enumeration: 'tc6': 6, 'tc7': 7, 'tc4': 4, 'tc5': 5, 'tc2': 2, 'tc3': 3, 'tc0': 0, 'tc1': 1.
                       tpQosSchedulerWeight 1.3.6.1.4.1.11863.6.22.1.2.2.1.2 integer read-write
Indecates the egress queue weight value. The value ranges from 0 to 127.
           tplinkQos8021p 1.3.6.1.4.1.11863.6.22.1.3
               tpQos8021pTable 1.3.6.1.4.1.11863.6.22.1.3.2 no-access
A list of qos 8021p entries. Here you can configure 802.1P Priority.
                   tpQos8021pEntry 1.3.6.1.4.1.11863.6.22.1.3.2.1 no-access
An entry contains of the information of qos 8021p.
                       tpQos8021pPriTag 1.3.6.1.4.1.11863.6.22.1.3.2.1.1 integer read-only
Indicates the precedence level defined by IEEE802.1P.
                       tpQos8021pPriLevel 1.3.6.1.4.1.11863.6.22.1.3.2.1.2 integer read-write
Indicates the priority level the packets with tag are mapped to. The priority levels are labeled as TC. Enumeration: 'tc6': 6, 'tc7': 7, 'tc4': 4, 'tc5': 5, 'tc2': 2, 'tc3': 3, 'tc0': 0, 'tc1': 1.
           tplinkQosDSCP 1.3.6.1.4.1.11863.6.22.1.4
               tpQosDSCPEnable 1.3.6.1.4.1.11863.6.22.1.4.1 integer read-write
0. disable 1. enable Here you can enable or disable DSCP Priority. Enumeration: 'enable': 1, 'disable': 0.
               tpQosDSCPTable 1.3.6.1.4.1.11863.6.22.1.4.2 no-access
A list of qos DSCP entries. Here you can configure DSCP Priority.
                   tpQosDSCPEntry 1.3.6.1.4.1.11863.6.22.1.4.2.1 no-access
An entry contains of the information of qos DSCP.
                       tpQosDSCPPriTag 1.3.6.1.4.1.11863.6.22.1.4.2.1.1 integer read-only
Indicates the priority determined by the DS region of IP datagram. It ranges from 0 to 63.
                       tpQosDSCPPriLevel 1.3.6.1.4.1.11863.6.22.1.4.2.1.2 integer read-write
Indicates the priority level the packets with tag are mapped to. The priority levels are labeled as cos0 - cos7. Enumeration: 'cos7': 7, 'cos6': 6, 'cos5': 5, 'cos4': 4, 'cos3': 3, 'cos2': 2, 'cos1': 1, 'cos0': 0.
       tplinkQosNotifications 1.3.6.1.4.1.11863.6.22.2