TPLINK-PROTOCOL-VLAN-MIB: View SNMP OID List / Download MIB

VENDOR: TP-LINK


 Home MIB: TPLINK-PROTOCOL-VLAN-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, TPLINK-MIB, SNMPv2-TC, TPLINK-TC-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 tplinkProtocolVlanMIB 1.3.6.1.4.1.11863.6.16
Protocol VLAN (Virtual Local Area Network) is the way to classify VLANs based on Protocols. A Protocol is relative to a single VLAN ID. The untagged packets and the priority-tagged packets matching the protocol template will be tagged with this VLAN ID.
       tplinkProtocolVlanMIBObjects 1.3.6.1.4.1.11863.6.16.1
           protocolTemplate 1.3.6.1.4.1.11863.6.16.1.1
               protocolTemplateTable 1.3.6.1.4.1.11863.6.16.1.1.1 no-access
The Protocol Template should be created before configuring the Protocol VLAN. By default, the switch has defined the IP Template, ARP Template, RARP Template, etc. You can add more Protocol Template.
                   templateEntry 1.3.6.1.4.1.11863.6.16.1.1.1.1 no-access
An entry contains of the information of a protocol template.
                       templateProtocolName 1.3.6.1.4.1.11863.6.16.1.1.1.1.1 octet string read-only
Give a name for the Protocol Template,1-8 characters
                       templateEtherType 1.3.6.1.4.1.11863.6.16.1.1.1.1.2 octet string read-only
Enter the Ethernet protocol type field in the protocol template, for example 0800,0ff0. The value is [dsap ssap] when frame type is llc.
                       templateFrameType 1.3.6.1.4.1.11863.6.16.1.1.1.1.3 integer read-only
Enumeration: 'snap': 2, 'llc': 3, 'ethernet8023': 0, 'ethernetII': 1.
                       templateStatus 1.3.6.1.4.1.11863.6.16.1.1.1.1.4 tprowstatus read-only
the following two values are states: these values may be read or written active(1), the following three values are actions: these values may be written, but are never read createAndGo(4), destroy(6)
           protocolGroup 1.3.6.1.4.1.11863.6.16.1.2
               protocolGroupTable 1.3.6.1.4.1.11863.6.16.1.2.1 no-access
Here you can configure the Protocol VLAN.
                   protocolVlanEntry 1.3.6.1.4.1.11863.6.16.1.2.1.1 no-access
An entry contains of the information of a protocol vlan.
                       protocolName 1.3.6.1.4.1.11863.6.16.1.2.1.1.1 octet string read-only
Displays the protocol template name of the VLAN.
                       protocolVlanId 1.3.6.1.4.1.11863.6.16.1.2.1.1.2 integer read-only
Enter the ID number of the Protocol VLAN. This VLAN should be one of the 802.1Q VLANs the ingress port belongs to,1-4094.
                       protocolPortMember 1.3.6.1.4.1.11863.6.16.1.2.1.1.3 octet string read-only
Protocol Vlan port member.
                       protocolVlanStatus 1.3.6.1.4.1.11863.6.16.1.2.1.1.4 tprowstatus read-only
the following two values are states: these values may be read or written active(1), the following three values are actions: these values may be written, but are never read createAndGo(4), destroy(6)
       tplinkProtocolVlanNotifications 1.3.6.1.4.1.11863.6.16.2