TPLINK-IPADDR-MIB: View SNMP OID List / Download MIB

VENDOR: TP-LINK


 Home MIB: TPLINK-IPADDR-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, TPLINK-MIB, SNMPv2-TC, TPLINK-TC-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 tplinkIpAddrMIB 1.3.6.1.4.1.11863.6.6
Private MIB for ip address configuration.
     tplinkIpAddrMIBObjects 1.3.6.1.4.1.11863.6.6.1
         tpInterfaceConfig 1.3.6.1.4.1.11863.6.6.1.1
             tpVlanInterfaceTable 1.3.6.1.4.1.11863.6.6.1.1.1 no-access
A list of VLAN interface entries. VLAN interface is a virtual interface which is working in the level 3, it is used to communicate between the VLAN in the level 3, and it is not a physical entity in the device. Each VLAN has a VLAN interface,and the VLAN interface can transmit the packets for the port which belong to this VLAN. In general,because the VLAN can isolate broadcast, each VLAN has a subnet address,and as a gateway of the subnet address, the VLAN interface can do the transmittance basic of IP address in level 3 for the packet which need to span the subnet address.
                 tpVlanInterfaceConfigEntry 1.3.6.1.4.1.11863.6.6.1.1.1.1 no-access
The interface can be added or removed .
                     tpVlanInterfaceVlanId 1.3.6.1.4.1.11863.6.6.1.1.1.1.1 integer read-only
The id of the VLAN interface,and it must be in the 802.1Q VLAN of the ingress port.
                     tpVlanInterfaceSecondary 1.3.6.1.4.1.11863.6.6.1.1.1.1.2 integer read-only
If the ip address is secondary IP.
                     tpVlanInterfaceMode 1.3.6.1.4.1.11863.6.6.1.1.1.1.3 tpinterfacemode read-only
The IP address alloc-mode of VLAN interface.
                     tpVlanInterfaceIp 1.3.6.1.4.1.11863.6.6.1.1.1.1.4 ipaddress read-only
The IP address of the VLAN interface.
                     tpVlanInterfaceMsk 1.3.6.1.4.1.11863.6.6.1.1.1.1.5 ipaddress read-only
The IP mask of the VLAN interface.
                     tpVlanInterfaceName 1.3.6.1.4.1.11863.6.6.1.1.1.1.6 octet string read-only
The name of the VLAN interface.
                     tpVlanInterfaceStatus 1.3.6.1.4.1.11863.6.6.1.1.1.1.7 tprowstatus read-only
The following values are states: these values may be used as follow: active(1),if the entry is being used. notInService(2),destory the entry. notReady(3),destory the entry. createAndGo(4),not being used createAndWait(5),creat a new entry destroy(6),destory the entry.
             tpLoopbackInterfaceTable 1.3.6.1.4.1.11863.6.6.1.1.2 no-access
A list of Loopback interface entries. Loopback interface is a virtual interface which purely software implemented, commonly used as router-id or network test.
                 tpLoopbackInterfaceConfigEntry 1.3.6.1.4.1.11863.6.6.1.1.2.1 no-access
The interface can be added or removed .
                     tpLoopbackInterfaceId 1.3.6.1.4.1.11863.6.6.1.1.2.1.1 integer read-only
The id of the loopback interface (1-2147483647).
                     tpLoopbackInterfaceSecondary 1.3.6.1.4.1.11863.6.6.1.1.2.1.2 integer read-only
If the ip address is secondary IP.
                     tpLoopbackInterfaceMode 1.3.6.1.4.1.11863.6.6.1.1.2.1.3 tpinterfacemode2 read-only
The IP address alloc-mode of loopback interface.
                     tpLoopbackInterfaceIp 1.3.6.1.4.1.11863.6.6.1.1.2.1.4 ipaddress read-only
The IP address of the loopback interface.
                     tpLoopbackInterfaceMsk 1.3.6.1.4.1.11863.6.6.1.1.2.1.5 ipaddress read-only
The IP mask of the loopback interface.
                     tpLoopbackInterfaceName 1.3.6.1.4.1.11863.6.6.1.1.2.1.6 octet string read-only
The name of the loopback interface.
                     tpLoopbackInterfaceStatus 1.3.6.1.4.1.11863.6.6.1.1.2.1.7 tprowstatus read-only
Action status.
             tpRoutedPortTable 1.3.6.1.4.1.11863.6.6.1.1.3 no-access
A list of routed port. A routed port is special port mode which you can configure Layer 3 function like RIP, OSPF, while some Layer 2 function like speed, flow-control is also available.
                 tpRoutedPortConfigEntry 1.3.6.1.4.1.11863.6.6.1.1.3.1 no-access
The interface can be added or removed .
                     tpRoutedPortId 1.3.6.1.4.1.11863.6.6.1.1.3.1.1 octet string read-only
The port id.
                     tpRoutedPortSecondary 1.3.6.1.4.1.11863.6.6.1.1.3.1.2 integer read-only
If the ip address is secondary IP.
                     tpRoutedPortMode 1.3.6.1.4.1.11863.6.6.1.1.3.1.3 tpinterfacemode read-only
The IP address alloc-mode of the routed port.
                     tpRoutedPortIp 1.3.6.1.4.1.11863.6.6.1.1.3.1.4 ipaddress read-only
The IP address of the routed port.
                     tpRoutedPortMsk 1.3.6.1.4.1.11863.6.6.1.1.3.1.5 ipaddress read-only
The IP mask of the routed port.
                     tpRoutedPortName 1.3.6.1.4.1.11863.6.6.1.1.3.1.6 octet string read-only
The name of the routed port.
                     tpRoutedPortStatus 1.3.6.1.4.1.11863.6.6.1.1.3.1.7 tprowstatus read-only
Action status.
             tpPortChannelTable 1.3.6.1.4.1.11863.6.6.1.1.4 no-access
A list of port-channel interface entries.
                 tpPortChannelConfigEntry 1.3.6.1.4.1.11863.6.6.1.1.4.1 no-access
The interface can be added or removed .
                     tpPortChannelId 1.3.6.1.4.1.11863.6.6.1.1.4.1.1 integer read-only
The id of the port-channel interface.
                     tpPortChannelSecondary 1.3.6.1.4.1.11863.6.6.1.1.4.1.2 integer read-only
If the ip address is secondary IP.
                     tpPortChannelMode 1.3.6.1.4.1.11863.6.6.1.1.4.1.3 tpinterfacemode read-only
The IP address alloc-mode of port-channel interface.
                     tpPortChannelIp 1.3.6.1.4.1.11863.6.6.1.1.4.1.4 ipaddress read-only
The IP address of the port-channel interface.
                     tpPortChannelMsk 1.3.6.1.4.1.11863.6.6.1.1.4.1.5 ipaddress read-only
The IP mask of the port-channel interface.
                     tpPortChannelName 1.3.6.1.4.1.11863.6.6.1.1.4.1.6 octet string read-only
The name of the port-channel interface.
                     tpPortChannelStatus 1.3.6.1.4.1.11863.6.6.1.1.4.1.7 tprowstatus read-only
The following values are states: these values may be used as follow: active(1),if the entry is being used. notInService(2),destory the entry. notReady(3),destory the entry. createAndGo(4),not being used createAndWait(5),creat a new entry destroy(6),destory the entry.
     tplinkIpAddrNotifications 1.3.6.1.4.1.11863.6.6.2