TOW-OPT-MIB: View SNMP OID List / Download MIB

VENDOR: CODEX


 Home MIB: TOW-OPT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 codex 1.3.6.1.4.1.449
         cdxProductSpecific 1.3.6.1.4.1.449.2
             cdx6500 1.3.6.1.4.1.449.2.1
                 cdx6500Configuration 1.3.6.1.4.1.449.2.1.2
                     cdx6500CfgGeneralGroup 1.3.6.1.4.1.449.2.1.2.2
                         cdx6500TOWCfgTable 1.3.6.1.4.1.449.2.1.2.2.22 no-access
This table contains the configuration parameters for TOW.
                               cdx6500TOWCfgEntry 1.3.6.1.4.1.449.2.1.2.2.22.1 no-access
Configuration parameters for each TOW entry.
                                   cdx6500TowCfgEntryNum 1.3.6.1.4.1.449.2.1.2.2.22.1.1 integer read-only
Entry number used to reference this table record.
                                   cdx6500TowCfgEntryName 1.3.6.1.4.1.449.2.1.2.2.22.1.2 displaystring read-only
Range = 0-20 alphanumeric characters, use the space character to blank field.
                                   cdx6500TowCfgInt1StartTime 1.3.6.1.4.1.449.2.1.2.2.22.1.3 displaystring read-only
This parameter specifies the start time of the interval. Format : hh:mm hh : Is the start hour , with range 00 to 23. mm : Is the start minute, with range 00 to 59. This parameter specifies the start time of the interval. All the intervals configured in an entry do not overlap. Intervals configured in different entries can overlap.
                                   cdx6500TowCfgInt1Duration 1.3.6.1.4.1.449.2.1.2.2.22.1.4 displaystring read-only
Format : dd:hh:mm dd : Days . Range 00 to 06. hh : Hours. Range 00 to 23. mm : minutes. Range 00 to 59. This parameter specifies the duration of the interval starting from the start time configured. To check if the end time of the interval is as desired, check the Time of Week intervals under the statistics menu.
                                   cdx6500TowCfgInt1StartDays 1.3.6.1.4.1.449.2.1.2.2.22.1.5 displaystring read-only
DDD : This specifies the day. Range is one of MON TUE WED THU FRI SAT SUN. DDD+DDD+DDD : This specifies that the interval has to start on each of these days. The `+' operator implies AND. A maximum of 7 days can be specified. This parameter specifies the days on which the interval has to be applied. That is, the intervals would start on each of these days.
                                   cdx6500TowCfgInt2StartTime 1.3.6.1.4.1.449.2.1.2.2.22.1.6 displaystring read-only
This parameter specifies the start time of the interval. Format : hh:mm hh : Is the start hour , with range 00 to 23. mm : Is the start minute, with range 00 to 59. This parameter specifies the start time of the interval. All the intervals configured in an entry do not overlap. Intervals configured in different entries can overlap.
                                   cdx6500TowCfgInt2Duration 1.3.6.1.4.1.449.2.1.2.2.22.1.7 displaystring read-only
Format : dd:hh:mm dd : Days . Range 00 to 06. hh : Hours. Range 00 to 23. mm : minutes. Range 00 to 59. This parameter specifies the duration of the interval starting from the start time configured. To check if the end time of the interval is as desired, check the Time of Week intervals under the statistics menu.
                                   cdx6500TowCfgInt2StartDays 1.3.6.1.4.1.449.2.1.2.2.22.1.8 displaystring read-only
DDD : This specifies the day. Range is one of MON TUE WED THU FRI SAT SUN. DDD+DDD+DDD : This specifies that the interval has to start on each of these days. The `+' operator implies AND. A maximum of 7 days can be specified. This parameter specifies the days on which the interval has to be applied. That is, the intervals would start on each of these days.
                                   cdx6500TowCfgInt3StartTime 1.3.6.1.4.1.449.2.1.2.2.22.1.9 displaystring read-only
This parameter specifies the start time of the interval. Format : hh:mm hh : Is the start hour , with range 00 to 23. mm : Is the start minute, with range 00 to 59. This parameter specifies the start time of the interval. All the intervals configured in an entry do not overlap. Intervals configured in different entries can overlap.
                                   cdx6500TowCfgInt3Duration 1.3.6.1.4.1.449.2.1.2.2.22.1.10 displaystring read-only
Format : dd:hh:mm dd : Days . Range 00 to 06. hh : Hours. Range 00 to 23. mm : minutes. Range 00 to 59. This parameter specifies the duration of the interval starting from the start time configured. To check if the end time of the interval is as desired, check the Time of Week intervals under the statistics menu.
                                   cdx6500TowCfgInt3StartDays 1.3.6.1.4.1.449.2.1.2.2.22.1.11 displaystring read-only
DDD : This specifies the day. Range is one of MON TUE WED THU FRI SAT SUN. DDD+DDD+DDD : This specifies that the interval has to start on each of these days. The `+' operator implies AND. A maximum of 7 days can be specified. This parameter specifies the days on which the interval has to be applied. That is, the intervals would start on each of these days.
                                   cdx6500TowCfgInt4StartTime 1.3.6.1.4.1.449.2.1.2.2.22.1.12 displaystring read-only
This parameter specifies the start time of the interval. Format : hh:mm hh : Is the start hour , with range 00 to 23. mm : Is the start minute, with range 00 to 59. This parameter specifies the start time of the interval. All the intervals configured in an entry do not overlap. Intervals configured in different entries can overlap.
                                   cdx6500TowCfgInt4Duration 1.3.6.1.4.1.449.2.1.2.2.22.1.13 displaystring read-only
Format : dd:hh:mm dd : Days . Range 00 to 06. hh : Hours. Range 00 to 23. mm : minutes. Range 00 to 59. This parameter specifies the duration of the interval starting from the start time configured. To check if the end time of the interval is as desired, check the Time of Week intervals under the statistics menu.
                                   cdx6500TowCfgInt4StartDays 1.3.6.1.4.1.449.2.1.2.2.22.1.14 displaystring read-only
DDD : This specifies the day. Range is one of MON TUE WED THU FRI SAT SUN. DDD+DDD+DDD : This specifies that the interval has to start on each of these days. The `+' operator implies AND. A maximum of 7 days can be specified. This parameter specifies the days on which the interval has to be applied. That is, the intervals would start on each of these days.
                                   cdx6500TowCfgInt5StartTime 1.3.6.1.4.1.449.2.1.2.2.22.1.15 displaystring read-only
This parameter specifies the start time of the interval. Format : hh:mm hh : Is the start hour , with range 00 to 23. mm : Is the start minute, with range 00 to 59. This parameter specifies the start time of the interval. All the intervals configured in an entry do not overlap. Intervals configured in different entries can overlap.
                                   cdx6500TowCfgInt5Duration 1.3.6.1.4.1.449.2.1.2.2.22.1.16 displaystring read-only
Format : dd:hh:mm dd : Days . Range 00 to 06. hh : Hours. Range 00 to 23. mm : minutes. Range 00 to 59. This parameter specifies the duration of the interval starting from the start time configured. To check if the end time of the interval is as desired, check the Time of Week intervals under the statistics menu.
                                   cdx6500TowCfgInt5StartDays 1.3.6.1.4.1.449.2.1.2.2.22.1.17 displaystring read-only
DDD : This specifies the day. Range is one of MON TUE WED THU FRI SAT SUN. DDD+DDD+DDD : This specifies that the interval has to start on each of these days. The `+' operator implies AND. A maximum of 7 days can be specified. This parameter specifies the days on which the interval has to be applied. That is, the intervals would start on each of these days.
                                   cdx6500TowCfgInt6StartTime 1.3.6.1.4.1.449.2.1.2.2.22.1.18 displaystring read-only
This parameter specifies the start time of the interval. Format : hh:mm hh : Is the start hour , with range 00 to 23. mm : Is the start minute, with range 00 to 59. This parameter specifies the start time of the interval. All the intervals configured in an entry do not overlap. Intervals configured in different entries can overlap.
                                   cdx6500TowCfgInt6Duration 1.3.6.1.4.1.449.2.1.2.2.22.1.19 displaystring read-only
Format : dd:hh:mm dd : Days . Range 00 to 06. hh : Hours. Range 00 to 23. mm : minutes. Range 00 to 59. This parameter specifies the duration of the interval starting from the start time configured. To check if the end time of the interval is as desired, check the Time of Week intervals under the statistics menu.
                                   cdx6500TowCfgInt6StartDays 1.3.6.1.4.1.449.2.1.2.2.22.1.20 displaystring read-only
DDD : This specifies the day. Range is one of MON TUE WED THU FRI SAT SUN. DDD+DDD+DDD : This specifies that the interval has to start on each of these days. The `+' operator implies AND. A maximum of 7 days can be specified. This parameter specifies the days on which the interval has to be applied. That is, the intervals would start on each of these days.
                                   cdx6500TowCfgInt7StartTime 1.3.6.1.4.1.449.2.1.2.2.22.1.21 displaystring read-only
This parameter specifies the start time of the interval. Format : hh:mm hh : Is the start hour , with range 00 to 23. mm : Is the start minute, with range 00 to 59. This parameter specifies the start time of the interval. All the intervals configured in an entry do not overlap. Intervals configured in different entries can overlap.
                                   cdx6500TowCfgInt7Duration 1.3.6.1.4.1.449.2.1.2.2.22.1.22 displaystring read-only
Format : dd:hh:mm dd : Days . Range 00 to 06. hh : Hours. Range 00 to 23. mm : minutes. Range 00 to 59. This parameter specifies the duration of the interval starting from the start time configured. To check if the end time of the interval is as desired, check the Time of Week intervals under the statistics menu.
                                   cdx6500TowCfgInt7StartDays 1.3.6.1.4.1.449.2.1.2.2.22.1.23 displaystring read-only
DDD : This specifies the day. Range is one of MON TUE WED THU FRI SAT SUN. DDD+DDD+DDD : This specifies that the interval has to start on each of these days. The `+' operator implies AND. A maximum of 7 days can be specified. This parameter specifies the days on which the interval has to be applied. That is, the intervals would start on each of these days.
                                   cdx6500TowCfgInt8StartTime 1.3.6.1.4.1.449.2.1.2.2.22.1.24 displaystring read-only
This parameter specifies the start time of the interval. Format : hh:mm hh : Is the start hour , with range 00 to 23. mm : Is the start minute, with range 00 to 59. This parameter specifies the start time of the interval. All the intervals configured in an entry do not overlap. Intervals configured in different entries can overlap.
                                   cdx6500TowCfgInt8Duration 1.3.6.1.4.1.449.2.1.2.2.22.1.25 displaystring read-only
Format : dd:hh:mm dd : Days . Range 00 to 06. hh : Hours. Range 00 to 23. mm : minutes. Range 00 to 59. This parameter specifies the duration of the interval starting from the start time configured. To check if the end time of the interval is as desired, check the Time of Week intervals under the statistics menu.
                                   cdx6500TowCfgInt8StartDays 1.3.6.1.4.1.449.2.1.2.2.22.1.26 displaystring read-only
DDD : This specifies the day. Range is one of MON TUE WED THU FRI SAT SUN. DDD+DDD+DDD : This specifies that the interval has to start on each of these days. The `+' operator implies AND. A maximum of 7 days can be specified. This parameter specifies the days on which the interval has to be applied. That is, the intervals would start on each of these days.
                                   cdx6500TowCfgInt9StartTime 1.3.6.1.4.1.449.2.1.2.2.22.1.27 displaystring read-only
This parameter specifies the start time of the interval. Format : hh:mm hh : Is the start hour , with range 00 to 23. mm : Is the start minute, with range 00 to 59. This parameter specifies the start time of the interval. All the intervals configured in an entry do not overlap. Intervals configured in different entries can overlap.
                                   cdx6500TowCfgInt9Duration 1.3.6.1.4.1.449.2.1.2.2.22.1.28 displaystring read-only
Format : dd:hh:mm dd : Days . Range 00 to 06. hh : Hours. Range 00 to 23. mm : minutes. Range 00 to 59. This parameter specifies the duration of the interval starting from the start time configured. To check if the end time of the interval is as desired, check the Time of Week intervals under the statistics menu.
                                   cdx6500TowCfgInt9StartDays 1.3.6.1.4.1.449.2.1.2.2.22.1.29 displaystring read-only
DDD : This specifies the day. Range is one of MON TUE WED THU FRI SAT SUN. DDD+DDD+DDD : This specifies that the interval has to start on each of these days. The `+' operator implies AND. A maximum of 7 days can be specified. This parameter specifies the days on which the interval has to be applied. That is, the intervals would start on each of these days.
                                   cdx6500TowCfgInt10StartTime 1.3.6.1.4.1.449.2.1.2.2.22.1.30 displaystring read-only
This parameter specifies the start time of the interval. Format : hh:mm hh : Is the start hour , with range 00 to 23. mm : Is the start minute, with range 00 to 59. This parameter specifies the start time of the interval. All the intervals configured in an entry do not overlap. Intervals configured in different entries can overlap.
                                   cdx6500TowCfgInt10Duration 1.3.6.1.4.1.449.2.1.2.2.22.1.31 displaystring read-only
Format : dd:hh:mm dd : Days . Range 00 to 06. hh : Hours. Range 00 to 23. mm : minutes. Range 00 to 59. This parameter specifies the duration of the interval starting from the start time configured. To check if the end time of the interval is as desired, check the Time of Week intervals under the statistics menu.
                                   cdx6500TowCfgInt10StartDays 1.3.6.1.4.1.449.2.1.2.2.22.1.32 displaystring read-only
DDD : This specifies the day. Range is one of MON TUE WED THU FRI SAT SUN. DDD+DDD+DDD : This specifies that the interval has to start on each of these days. The `+' operator implies AND. A maximum of 7 days can be specified. This parameter specifies the days on which the interval has to be applied. That is, the intervals would start on each of these days.