TN-SAS-PORT-MIB: View SNMP OID List / Download MIB

VENDOR: NOKIA


 Home MIB: TN-SAS-PORT-MIB
Download as:   
SNMPv2-CONF, IF-MIB, TROPIC-GLOBAL-REG, SNMPv2-SMI, TN-TC-MIB, TN-PORT-MIB, TROPIC-SYSTEM-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 tnSASPortMIBModule 1.3.6.1.4.1.7483.7.2.1.1.6
This document is the SNMP MIB module to manage and provision the hardware components of the Nokia 7x50 device. Copyright 2003-2011 Nokia. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Nokia's proprietary intellectual property. Nokia retains all title and ownership in the Specification, including any revisions. Nokia grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Nokia products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Nokia makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
 tnSASPortObjs 1.3.6.1.4.1.7483.7.2.2.2.2
     tnSASPortExtnTable 1.3.6.1.4.1.7483.7.2.2.2.2.2 no-access
This table has additional information about the 7210 platforms
         tnSASPortExtnEntry 1.3.6.1.4.1.7483.7.2.2.2.2.2.1 no-access
Each row entry represents a port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Before an IOM tmnxMDAEntry can be deleted from the tmnxMDATable, its supported tnPortEntries must be in the proper state for removal.
             tnPortUplinkMode 1.3.6.1.4.1.7483.7.2.2.2.2.2.1.1 truthvalue read-write
If the tnPortUplinkMode is set to true when the tnPortMode is set to 'access(1)' and the port acts as an uplink. tnPortEncaptype must also be configured 'qinqEncap' when using access port as uplink port.
             tnPortAccessEgressQoSPolicyId 1.3.6.1.4.1.7483.7.2.2.2.2.2.1.2 unsigned32 read-write
Qos Policy ID for Access Egress Port
             tnPortNetworkQoSPolicyId 1.3.6.1.4.1.7483.7.2.2.2.2.2.1.3 unsigned32 read-write
Port Network Policy ID
             tnPortShgGroupName 1.3.6.1.4.1.7483.7.2.2.2.2.2.1.4 tnameditemorempty read-write
Split horizon group to be attached to this port
     tnSASPortNetIngressStatsTable 1.3.6.1.4.1.7483.7.2.2.2.2.3 no-access
Defines the Nokia SAS series network port ingress statistics table for providing, via SNMP, the capability of retrieving the traffic statistics for the physical Meters being used for the ports to forward the network ingress traffic.
         tnSASPortNetIngressStatsEntry 1.3.6.1.4.1.7483.7.2.2.2.2.3.1 no-access
Defines an entry in tnSASPortNetIngressStatsTable. Entries are created and deleted by the system depending on the meter policy being used at the specific port.
             tnSASPortNetIngressMeterIndex 1.3.6.1.4.1.7483.7.2.2.2.2.3.1.1 tnetworkingressmeterid no-access
tnSASPortNetIngressQueueIndex serves as the tertiary index. When used in conjunction with tnSysSwitchId and tnPortPortID, it uniquely identifies a network ingress meter for the specified port in the managed system.
             tnSASPortNetIngressFwdInProfPkts 1.3.6.1.4.1.7483.7.2.2.2.2.3.1.2 counter64 read-only
tnSASPortNetIngressFwdInProfPkts indicates the number of conforming network ingress packets forwarded on this port using this meter.
             tnSASPortNetIngressFwdOutProfPkts 1.3.6.1.4.1.7483.7.2.2.2.2.3.1.3 counter64 read-only
tnSASPortNetIngressFwdOutProfPkts indicates the number of exceeding network ingress packets forwarded on this port using this meter.
             tnSASPortNetIngressFwdInProfOcts 1.3.6.1.4.1.7483.7.2.2.2.2.3.1.4 counter64 read-only
tnSASPortNetIngressFwdInProfOcts indicates the number of conforming network ingress octets forwarded on this port using this meter.
             tnSASPortNetIngressFwdOutProfOcts 1.3.6.1.4.1.7483.7.2.2.2.2.3.1.5 counter64 read-only
tnSASPortNetIngressFwdOutProfOcts indicates the number of exceeding network ingress octets forwarded on this port using this meter.
     tnSASPortEtherExtnTable 1.3.6.1.4.1.7483.7.2.2.2.2.4 no-access
This table has additional information about the 7210 platforms
         tnSASPortEtherExtnEntry 1.3.6.1.4.1.7483.7.2.2.2.2.4.1 no-access
Each row entry represents an Ethernet port on a IOM card in a chassis in the system. Entries cannot be created and deleted via SNMP SET operations. Before an IOM cardEntry can be deleted from the tmnxMDATable, its supported tnPortEntries and tnPortEtherEntries must be in the proper state for removal. The tnPortEtherEntry contains attributes that are unique to the Ethernet TmnxPortType.
             tnPortEtherEgressMaxBurst 1.3.6.1.4.1.7483.7.2.2.2.2.4.1.1 integer32 read-write
Controls the amount of burst the egress port can generate. Its configured in terms of Kilo bits.Its an optional parameter. And cannot be used without egress-rate being set.
             tnPortStatsQueue1PktsFwd 1.3.6.1.4.1.7483.7.2.2.2.2.4.1.2 truthvalue read-write
If tnPortStatsQueue1PktsFwd is set to 'true', count the egress packets with forwarding class value '0'.
             tnPortStatsQueue2PktsFwd 1.3.6.1.4.1.7483.7.2.2.2.2.4.1.3 truthvalue read-write
If tnPortStatsQueue2PktsFwd is set to 'true', count the egress packets with forwarding class value '1'.
             tnPortStatsQueue3PktsFwd 1.3.6.1.4.1.7483.7.2.2.2.2.4.1.4 truthvalue read-write
If tnPortStatsQueue3PktsFwd is set to 'true', count the egress packets with forwarding class value '2'.
             tnPortStatsQueue4PktsFwd 1.3.6.1.4.1.7483.7.2.2.2.2.4.1.5 truthvalue read-write
If tnPortStatsQueue4PktsFwd is set to 'true', count the egress packets with forwarding class value '3'.
             tnPortStatsQueue5PktsFwd 1.3.6.1.4.1.7483.7.2.2.2.2.4.1.6 truthvalue read-write
If tnPortStatsQueue5PktsFwd is set to 'true', count the egress packets with forwarding class value '5'.
             tnPortStatsQueue6PktsFwd 1.3.6.1.4.1.7483.7.2.2.2.2.4.1.7 truthvalue read-write
If tnPortStatsQueue6PktsFwd is set to 'true', count the egress packets with forwarding class value '6'.
             tnPortStatsQueue7PktsFwd 1.3.6.1.4.1.7483.7.2.2.2.2.4.1.8 truthvalue read-write
If tnPortStatsQueue7PktsFwd is set to 'true', count the egress packets with forwarding class value '7'.
             tnPortStatsQueue8PktsFwd 1.3.6.1.4.1.7483.7.2.2.2.2.4.1.9 truthvalue read-write
If tnPortStatsQueue8PktsFwd is set to 'true', count the egress packets with forwarding class value '8'.
             tnPortEtherEgrSchedMode 1.3.6.1.4.1.7483.7.2.2.2.2.4.1.10 integer read-write
tnPortEtherEgrSchedMode sets the SAP egress scheduler mode. In 'fc-based' mode the prority of all the egress queues across all the SAPs are considered to determine the next queue to schedule. In 'sap-based' mode the scheduler uses the priority of all the egress queues in a SAP to determine the next queue to schedule and uses round-robin scheduling mechanism to schedule each of the SAP Enumeration: 'fc-based': 1, 'sap-based': 2.
             tnPortEtherLoopback 1.3.6.1.4.1.7483.7.2.2.2.2.4.1.11 integer read-write
If tnPortEtherLoopback is set to internal, the ethernet port is set to loopback mode. none will clear the loopback Enumeration: 'none': 0, 'internal': 2.
             tnPortEtherIpMTU 1.3.6.1.4.1.7483.7.2.2.2.2.4.1.12 unsigned32 read-write
tnPortEtherIpMTU is the IP MTU for interfaces using this port
             tnPortEtherClockConfig 1.3.6.1.4.1.7483.7.2.2.2.2.4.1.13 integer read-write
When the value of tnPortEtherClockConfig is 'automatic' the Ethernet interface will automatically negotiate clock mastership along with other link parameters with the far end. Depending upon the capabilities of the two ends, one will be master the other will be slave for clocking. When the value of tnPortEtherClockConfig is 'manual-master', the Ethernet interface will negotiate other link parameters with the far end except clock mastership. It assumes clock mastership and want the other end to be slave. When the value is 'manual-slave' this ethernet interface chooses to be slave and wants the far end to assume clock mastership. For 10 baseT and 100 baseT ethernet interfaces, value of this variable should be 'none', as this will not be applicable for those interfaces. Enumeration: 'manual-master': 2, 'notApplicable': 0, 'manual-slave': 3, 'automatic': 1.
             tnPortLoopbckServId 1.3.6.1.4.1.7483.7.2.2.2.2.4.1.14 tmnxservid read-write
Loopback Service Id
             tnPortLoopbckSapPortId 1.3.6.1.4.1.7483.7.2.2.2.2.4.1.15 interfaceindexorzero read-write
Loopback Sap Port Id 0 indicates the port is undefined.
             tnPortLoopbckSapEncapVal 1.3.6.1.4.1.7483.7.2.2.2.2.4.1.16 tmnxencapval read-write
Loopback Sap Encapsulation
             tnPortLoopbckSrcMacAddr 1.3.6.1.4.1.7483.7.2.2.2.2.4.1.17 macaddress read-write
Loopback Source Mac Address
             tnPortLoopbckDstMacAddr 1.3.6.1.4.1.7483.7.2.2.2.2.4.1.18 macaddress read-write
Loopback Destination Mac Address
             tnPortAccEgrSapQosMarking 1.3.6.1.4.1.7483.7.2.2.2.2.4.1.19 integer read-write
Port Ethernet Access Egress Sap Qos Marking Enumeration: 'enable': 1, 'disable': 2.
             tnPortLldpTnlNrstBrdgeDstMac 1.3.6.1.4.1.7483.7.2.2.2.2.4.1.20 truthvalue read-only
If tnPortLldpTnlNrstBrdgeDstMac is set to 'true' and admin status is disabled lldp pkts will be tunnelled.
             tnPortPtpEnable 1.3.6.1.4.1.7483.7.2.2.2.2.4.1.21 truthvalue read-only
1588v2 PTP enabled on port
     tnPortShgInfoTable 1.3.6.1.4.1.7483.7.2.2.2.2.6 no-access
A table that contains port split-horizon group information.
         tnPortShgInfoEntry 1.3.6.1.4.1.7483.7.2.2.2.2.6.1 no-access
Split-horizon group information about a TLS service.
             tnPortShgName 1.3.6.1.4.1.7483.7.2.2.2.2.6.1.1 tnameditem no-access
The value of the object tnPortShgName specifies the name of the split-horizon group.
             tnPortShgRowStatus 1.3.6.1.4.1.7483.7.2.2.2.2.6.1.2 rowstatus read-only
The value of the object tnPortShgRowStatus specifies the status of this row. The only values supported during a set operation are createAndGo(4) and destroy(6). To delete an entry from this table, there should be no port Bindings refering to it.
             tnPortShgInstanceId 1.3.6.1.4.1.7483.7.2.2.2.2.6.1.3 unsigned32 read-only
The value of the object tnPortShgInstanceId indicates the instance identifier for the split horizon group.
             tnPortShgDescription 1.3.6.1.4.1.7483.7.2.2.2.2.6.1.4 servobjdesc read-only
The value of the object tnPortShgDescription specifies generic information about this split-horizon group.
             tnPortShgLastMgmtChange 1.3.6.1.4.1.7483.7.2.2.2.2.6.1.5 timestamp read-only
The value of the object tnPortShgLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this split-horizon group.
     tnPortNetEgressQueueStatsTable 1.3.6.1.4.1.7483.7.2.2.2.2.8 no-access
Defines the Nokia SAS series network port egress statistics table for providing, via SNMP, the capability of retrieving the traffic statistics for the physical queues being used for the ports to forward the network egress traffic.
         tnPortNetEgressQueueStatsEntry 1.3.6.1.4.1.7483.7.2.2.2.2.8.1 no-access
Defines an entry in tnPortNetEgressQueueStatsTable. Entries are created and deleted by the system depending on the queue policy being used at the specific port.
             tnPortNetEgressQueueStatsIndex 1.3.6.1.4.1.7483.7.2.2.2.2.8.1.1 tqueueid no-access
tnPortNetEgressQueueStatsIndex serves as the tertiary index. When used in conjunction with tnSysSwitchId and tnPortPortID, it uniquely identifies a network egress queue for the specified port in the managed system.
             tnPortNetEgressQueueStatsFwdPkts 1.3.6.1.4.1.7483.7.2.2.2.2.8.1.2 counter64 read-only
tnPortNetEgressQueueStatsFwdPkts indicates the number of forwarded network egress packets on this port using this queue.
             tnPortNetEgressQueueStatsFwdOcts 1.3.6.1.4.1.7483.7.2.2.2.2.8.1.3 counter64 read-only
tnPortNetEgressQueueStatsFwdOcts indicates the number of forwarded network egress octets on this port using this queue.
             tnPortNetEgressQueueStatsDroPkts 1.3.6.1.4.1.7483.7.2.2.2.2.8.1.4 counter64 read-only
tnPortNetEgressQueueStatsDroPkts indicates the number of dropped network egress packets on this port using this queue.
             tnPortNetEgressQueueStatsDroOcts 1.3.6.1.4.1.7483.7.2.2.2.2.8.1.5 counter64 read-only
tnPortNetEgressQueueStatsDroOcts indicates the number of dropped network egress octets on this port using this queue.
             tnPortNetEgressQueueStatsInProfDroPkts 1.3.6.1.4.1.7483.7.2.2.2.2.8.1.6 counter64 read-only
tnPortNetEgressQueueStatsInProfDroPkts indicates the number of dropped network egress octets on this port using this in-profile queue.
             tnPortNetEgressQueueStatsInProfDroOcts 1.3.6.1.4.1.7483.7.2.2.2.2.8.1.7 counter64 read-only
tnPortNetEgressQueueStatsInProfDroOcts indicates the number of dropped network egress octets on this port using this in-profile queue.
             tnPortNetEgressQueueStatsOutProfDroPkts 1.3.6.1.4.1.7483.7.2.2.2.2.8.1.8 counter64 read-only
tnPortNetEgressQueueStatsOutProfDroPkts indicates the number of dropped network egress octets on this port using this out-profile queue.
             tnPortNetEgressQueueStatsOutProfDroOcts 1.3.6.1.4.1.7483.7.2.2.2.2.8.1.9 counter64 read-only
tnPortNetEgressQueueStatsOutProfDroOcts indicates the number of dropped network egress octets on this port using this out-profile queue.
     tnSASPssIfTable 1.3.6.1.4.1.7483.7.2.2.2.2.50 no-access
This table contains additional objects for the interface table (ifTable) required for the management of packet cards in PSS.
           tnSASPssIfEntry 1.3.6.1.4.1.7483.7.2.2.2.2.50.1 no-access
An entry containing additional management information applicable to PSS packet cards.
               ifStatsUpdateTimeStamp 1.3.6.1.4.1.7483.7.2.2.2.2.50.1.1 counter64 read-only
A timestamp value to indicate the last update to the statistics in the interface table. This can be used for accurate delta calculations of periodic readings of the statistics. The timestamp is in millisecond units
     tnSASPortScalar1 1.3.6.1.4.1.7483.7.2.2.2.2.101 unsigned32 read-only
A dummy scalar that satisfies a SNMP get request quickly when there is no 11QPE24 card provisioned. Otherwise, it has to traverse the remaining 11QPE24 MIB to get to the next applicable item.
     tnSASPortScalar2 1.3.6.1.4.1.7483.7.2.2.2.2.102 unsigned32 read-only