TN-CES-MIB: View SNMP OID List / Download MIB

VENDOR: TRANSITION ENGINEERING INC.


 Home MIB: TN-CES-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, INET-ADDRESS-MIB, TRANSITION-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 tnCesMIB 1.3.6.1.4.1.868.2.5.60
The MIB module for the Circuit Emulation Service.
       tnCesNotifications 1.3.6.1.4.1.868.2.5.60.0
           tnCesEventDetails 1.3.6.1.4.1.868.2.5.60.0.1 displaystring read-only
Text information describing the event that has occurred.
           tnCesEventPriority 1.3.6.1.4.1.868.2.5.60.0.2 unsigned32 read-only
Priority of this event.
           tnCesEventId 1.3.6.1.4.1.868.2.5.60.0.3
               tnCesEventIdGeneral 1.3.6.1.4.1.868.2.5.60.0.3.0
                   tnCesGeneralEvent 1.3.6.1.4.1.868.2.5.60.0.3.0.1
Notification of an event relating to CES.
       tnCesObjects 1.3.6.1.4.1.868.2.5.60.1
           tnCesProtocol 1.3.6.1.4.1.868.2.5.60.1.1
               tnCesProtocolType 1.3.6.1.4.1.868.2.5.60.1.1.1 integer read-write
Which network protocol to use for TDM over IP packets. Note that MPLS is not currenly supported. Enumeration: 'ip': 1, 'mpls': 2, 'ipUdpRtp': 0, 'ethernet': 3.
               tnCesProtocolUnderrunFixed 1.3.6.1.4.1.868.2.5.60.1.1.2 truthvalue read-write
Determins the underrun value in a TDM timeslot when no data was available in the logical link jitter buffer. When true, use the fixed value specified by tnCesProtocolUnderrunValue. When false, use the last value sent on the timeslot.
               tnCesProtocolUnderrunValue 1.3.6.1.4.1.868.2.5.60.1.1.3 unsigned32 read-write
Determins the underrun value in a TDM timeslot when no data was available in the logical link jitter buffer. Used when tnCesProtocolUnderrunFixed is false.
               tnCesProtocolUDPBasePort 1.3.6.1.4.1.868.2.5.60.1.1.4 unsigned32 read-write
The UDP port number used for the first logical link. The 2nd logical link uses this value plus one, and so on. Only relevent when tnCesProtocolType is ipUdpRtp.
               tnCesProtocolEnableSSRCChecking 1.3.6.1.4.1.868.2.5.60.1.1.5 truthvalue read-write
Whether to check the RTP SSRC value on received packets. Disabling the check can be useful in aiding compatibility with equipment from other vendors. Only used when tnCesProtocolType is ipUdpRtp.
           tnCesClockingAlternate 1.3.6.1.4.1.868.2.5.60.1.2
               tnCesClockingAlternateEnable 1.3.6.1.4.1.868.2.5.60.1.2.1 truthvalue read-write
Whether to use the alternate clocking architecure which supports asymmeric and plesiosynchronous operation.
           tnCesClockRecovery 1.3.6.1.4.1.868.2.5.60.1.3
               tnCesClockRecoveryAlgorithm 1.3.6.1.4.1.868.2.5.60.1.3.1 integer read-write
Which algorithm to use for TDM over IP clock recovery. Enumeration: 'adaptiveFrequency': 3, 'adaptive': 1, 'adaptiveEnhanced': 2.
               tnCesClockRecoveryFilter 1.3.6.1.4.1.868.2.5.60.1.3.2 integer read-write
Which filter setting to use for TDM over IP clock recovery. Enumeration: 'type1': 1, 'type2': 2.
               tnCesClockRecoveryMaxDeviation 1.3.6.1.4.1.868.2.5.60.1.3.3 unsigned32 read-write
The maximum step change allowed in the recovered clock in PPM.
           tnCesEvent 1.3.6.1.4.1.868.2.5.60.1.4
               tnCesEventThreshold 1.3.6.1.4.1.868.2.5.60.1.4.1 unsigned32 read-write
Priority threshold for reporting events related to CES. Events with a priority above this level are not reported to the system log or notified in SNMP traps.
               tnCesEventReportingInterval 1.3.6.1.4.1.868.2.5.60.1.4.2 unsigned32 read-write
How frequently to report certain CES events when thesholds are exceeded. The interval is specicifed in minutes.
               tnCesEventThresholdEarly 1.3.6.1.4.1.868.2.5.60.1.4.3 unsigned32 read-write
Threshold above which to report early packet errors. When this value is zero, reporting is disabled.
               tnCesEventThresholdLate 1.3.6.1.4.1.868.2.5.60.1.4.4 unsigned32 read-write
Threshold above which to report late packet errors. When this value is zero, reporting is disabled.
               tnCesEventThresholdUnderrun 1.3.6.1.4.1.868.2.5.60.1.4.5 unsigned32 read-write
Threshold above which to report underrun errors. When this value is zero, reporting is disabled.
               tnCesEventThresholdDCO 1.3.6.1.4.1.868.2.5.60.1.4.6 unsigned32 read-write
Threshold above which to report clock recovery DCO changes. When this value is zero, reporting is disabled.
           tnCesProcessor 1.3.6.1.4.1.868.2.5.60.1.5
               tnCesProcessorVersion 1.3.6.1.4.1.868.2.5.60.1.5.1 displaystring read-only
CES packet processor hardware and software version information.
               tnCesProcessorProtocolMatch1 1.3.6.1.4.1.868.2.5.60.1.5.2 counter32 read-only
The number of frames which hit protocol matching rule 1.
               tnCesProcessorProtocolMatch2 1.3.6.1.4.1.868.2.5.60.1.5.3 counter32 read-only
The number of frames which hit protocol matching rule 2.
               tnCesProcessorProtocolMatch3 1.3.6.1.4.1.868.2.5.60.1.5.4 counter32 read-only
The number of frames which hit protocol matching rule 3.
               tnCesProcessorProtocolMatch4 1.3.6.1.4.1.868.2.5.60.1.5.5 counter32 read-only
The number of frames which hit protocol matching rule 4.
               tnCesProcessorProtocolNoMatch 1.3.6.1.4.1.868.2.5.60.1.5.6 counter32 read-only
The number of frames which hit no protocol matching rules.
               tnCesProcessorClassifyFail 1.3.6.1.4.1.868.2.5.60.1.5.7 counter32 read-only
The number of frames which fail to classify.
               tnCesProcessorVerifyFail 1.3.6.1.4.1.868.2.5.60.1.5.8 counter32 read-only
The number of frames which fail to verify.
               tnCesProcessorIpv4ChecksumFail 1.3.6.1.4.1.868.2.5.60.1.5.9 counter32 read-only
The number of frames with IPV4 checksum failures.
               tnCesProcessorUdpChecksumFail 1.3.6.1.4.1.868.2.5.60.1.5.10 counter32 read-only
The number of frames with UDP checksum failures.
           tnCesClockStatus 1.3.6.1.4.1.868.2.5.60.1.6
               tnCesClockStatusLock 1.3.6.1.4.1.868.2.5.60.1.6.1 integer read-only
The CES processor DPLL lock status. Enumeration: 'clockLockFreerun': 3, 'clockLockAutomatic': 0, 'clockLockHoldover': 2, 'clockLockNormal': 1, 'clockLockUnknown': 4.
               tnCesClockStatusSlaveMode 1.3.6.1.4.1.868.2.5.60.1.6.2 truthvalue read-only
Whether the CES processor clock is in slave (true) or master (false) mode.
               tnCesClockStatusSource 1.3.6.1.4.1.868.2.5.60.1.6.3 displaystring read-only
Name of the current clock source.
           tnCesTemperature 1.3.6.1.4.1.868.2.5.60.1.7
               tnCesTemperatureBoardWhole 1.3.6.1.4.1.868.2.5.60.1.7.1 unsigned32 read-only
Temperature measurement of circuit board. Whole part before the decimal point.
               tnCesTemperatureBoardFrac 1.3.6.1.4.1.868.2.5.60.1.7.2 unsigned32 read-only
Temperature measurement of circuit board. Fractional part after the decimal point.
               tnCesTemperatureProcessorWhole 1.3.6.1.4.1.868.2.5.60.1.7.3 unsigned32 read-only
Temperature measurement of processor. Whole part before the decimal point.
               tnCesTemperatureProcessorFrac 1.3.6.1.4.1.868.2.5.60.1.7.4 unsigned32 read-only
Temperature measurement of processor. Fractional part after the decimal point.
           tnCesIP 1.3.6.1.4.1.868.2.5.60.1.8
               tnCesIpv4AddrType 1.3.6.1.4.1.868.2.5.60.1.8.1 inetaddresstype read-only
The IP address type associated with tnCesIpv4Addr. Has the value ipv4.
               tnCesIpv4Addr 1.3.6.1.4.1.868.2.5.60.1.8.2 inetaddress read-write
The IPv4 address to use for TDM over IP packets. Applies when the remote end of a circuit has an IPv4 address.
               tnCesIpv4PrefixLength 1.3.6.1.4.1.868.2.5.60.1.8.3 unsigned32 read-write
The prefix length associated with the CES IPv4 address.
               tnCesIpv6AddrType 1.3.6.1.4.1.868.2.5.60.1.8.4 inetaddresstype read-only
The IP address type associated with tnCesIpv6Addr. Has the value ipv6.
               tnCesIpv6Addr 1.3.6.1.4.1.868.2.5.60.1.8.5 inetaddress read-write
The IPv6 address to use for TDM over IP packets. Applies when the remote end of a circuit has an IPv6 address.
               tnCesIpv6PrefixLength 1.3.6.1.4.1.868.2.5.60.1.8.6 unsigned32 read-write
The prefix length associated with the CES IPv6 address.
           tnCesClockPriority 1.3.6.1.4.1.868.2.5.60.1.9
               tnCesMiscClockPriorityTable 1.3.6.1.4.1.868.2.5.60.1.9.1 no-access
Table of clock priorities for miscellaneous sources.
                   tnCesMiscClockPriorityEntry 1.3.6.1.4.1.868.2.5.60.1.9.1.1 no-access
Each entry has the clock priority for a particular clock source.
                       tnCesMiscClockPriorityItem 1.3.6.1.4.1.868.2.5.60.1.9.1.1.1 integer no-access
Which clock source this clock priority is for. Enumeration: 'internal': 1.
                       tnCesMiscClockPriority 1.3.6.1.4.1.868.2.5.60.1.9.1.1.2 unsigned32 read-write
The clock priority of a clock source. A lower numeric value indicates a higher priority.
               tnCesPRIClockPriorityTable 1.3.6.1.4.1.868.2.5.60.1.9.2 no-access
Table of clock priorities for TDM ports.
                   tnCesPRIClockPriorityEntry 1.3.6.1.4.1.868.2.5.60.1.9.2.1 no-access
Each entry has the clock priority for a TDM port.
                       tnCesPRIClockPriorityIndex 1.3.6.1.4.1.868.2.5.60.1.9.2.1.1 unsigned32 no-access
Which TDM port this clock priority is for.
                       tnCesPRIClockPriority 1.3.6.1.4.1.868.2.5.60.1.9.2.1.2 unsigned32 read-write
The clock priority of a TDM port. A lower numeric value indicates a higher priority.
               tnCesLLClockPriorityTable 1.3.6.1.4.1.868.2.5.60.1.9.3 no-access
Table of clock priorities for logical link clock streams.
                   tnCesLLClockPriorityEntry 1.3.6.1.4.1.868.2.5.60.1.9.3.1 no-access
Each entry has the clock priority for a logical link clock stream.
                       tnCesLLClockPriorityIndex 1.3.6.1.4.1.868.2.5.60.1.9.3.1.1 unsigned32 no-access
Which logical link clocking stream this clock priority is for.
                       tnCesLLClockPriority 1.3.6.1.4.1.868.2.5.60.1.9.3.1.2 unsigned32 read-write
The clock priority of a logical link clock stream. A lower numeric value indicates a higher priority.
           tnCesMulticastJoinTable 1.3.6.1.4.1.868.2.5.60.1.10 no-access
Table of multicast groups to join.
                 tnCesMulticastJoinEntry 1.3.6.1.4.1.868.2.5.60.1.10.1 no-access
Each entry has the configuration for a multicast group to join.
                     tnCesMulticastJoinIndex 1.3.6.1.4.1.868.2.5.60.1.10.1.1 unsigned32 no-access
Index of multicast group.
                     tnCesMulticastJoinAction 1.3.6.1.4.1.868.2.5.60.1.10.1.2 truthvalue read-write
Whether to join a multicast group. When true, join the group specified by tnCesMulticastJoinAddr. When false, do not join any group and leave any previously joined goup.
                     tnCesMulticastJoinAddrType 1.3.6.1.4.1.868.2.5.60.1.10.1.3 inetaddresstype read-write
The IP address type of the multicast group to join. Must be ipv4 or ipv6.
                     tnCesMulticastJoinAddr 1.3.6.1.4.1.868.2.5.60.1.10.1.4 inetaddress read-write
The IP address of the multicast group to join. This must be a multicast address.
           tnCesTDMTable 1.3.6.1.4.1.868.2.5.60.1.11 no-access
Table of TDM ports.
                 tnCesTDMEntry 1.3.6.1.4.1.868.2.5.60.1.11.1 no-access
Each entry has the configuration for a TDM port.
                     tnCesTDMPortNumber 1.3.6.1.4.1.868.2.5.60.1.11.1.1 unsigned32 no-access
The TDM port number.
                     tnCesTDMPresentation 1.3.6.1.4.1.868.2.5.60.1.11.1.2 integer read-write
Network or user presentation. This options is not supported on all products. Modifications will be ignore on such products. Enumeration: 'te': 0, 'nt': 1.
                     tnCesTDMFraming 1.3.6.1.4.1.868.2.5.60.1.11.1.3 integer read-write
Whether the TDM port operates in framed fractional or unframed full mode. It is not possible to set a port mode which would exclude any TDM channels that are assigned to a logical link (see tnCesLLChanSelectUsed). Any such channel must be deassigned first. Enumeration: 'full': 0, 'fractional': 1.
                     tnCesTDMMode 1.3.6.1.4.1.868.2.5.60.1.11.1.4 integer read-write
TDM port mode T1 or E1. It is not possible to set a port mode which would exclude any TDM channels that are assigned to a logical link (see tnCesLLChanSelectUsed). Any such channel must be deassigned first. Enumeration: 'e1': 0, 't1': 1.
                     tnCesTDMTS0Passthrough 1.3.6.1.4.1.868.2.5.60.1.11.1.5 truthvalue read-write
Whether timeslot zero is passed in E1 fractional mode. Only valid when tnCesTDMFraming is fractional and tnCesTDMMode is E1.
                     tnCesTDMCRC4 1.3.6.1.4.1.868.2.5.60.1.11.1.6 truthvalue read-write
Whether the TDM framing uses CRC4. Only valid when tnCesTDMFraming is fractional.
                     tnCesTDMShutdownCallsOnFail 1.3.6.1.4.1.868.2.5.60.1.11.1.7 truthvalue read-write
Whether to shutdown the CES connections or ISDN calls using this port when the port fails.
                     tnCesTDMImpedance 1.3.6.1.4.1.868.2.5.60.1.11.1.8 integer read-write
Electrical impedance of the TDM port, 75ohms or 120ohms. Enumeration: 'impedance120ohms': 0, 'impedance75ohms': 1.
                     tnCesTDMT1Framing 1.3.6.1.4.1.868.2.5.60.1.11.1.9 integer read-write
The frame structure in T1 mode. Only used when tnCesTDMMode is T1. Enumeration: 'esf': 0, 'd4': 1.
                     tnCesTDMT1LineCode 1.3.6.1.4.1.868.2.5.60.1.11.1.10 integer read-write
The line code in T1 mode. Only used when tnCesTDMMode is T1. Enumeration: 'ami': 1, 'b8zs': 0.
                     tnCesTDMT1LoopCodeType 1.3.6.1.4.1.868.2.5.60.1.11.1.11 integer read-write
The type of loop code which when detected on the port will cause loops to be switched on or off. Enumeration: 'fac2': 1, 'fac3': 2, 'fac1': 0, 'user': 3.
                     tnCesTDMT1LoopCodeRxEnable 1.3.6.1.4.1.868.2.5.60.1.11.1.12 truthvalue read-write
Whether detection of loop codes is enabled or disabled on the port.
                     tnCesTDMT1LoopCodeUserUp 1.3.6.1.4.1.868.2.5.60.1.11.1.13 unsigned32 read-write
User defined bit pattern to cause loop up for the FACU option.
                     tnCesTDMT1LoopCodeUserDown 1.3.6.1.4.1.868.2.5.60.1.11.1.14 unsigned32 read-write
User defined bit pattern to cause loop down for the FACU option.
                     tnCesTDMT1LoopCodeUserLength 1.3.6.1.4.1.868.2.5.60.1.11.1.15 unsigned32 read-write
The number of bits in tnCesTDMT1LoopCodeUserUp and tnCesTDMT1LoopCodeUserDown.
                     tnCesTDMDTE 1.3.6.1.4.1.868.2.5.60.1.11.1.16 truthvalue read-write
Whether the port is configured as DTE (true) or DCE (false). Only applies to Contra ports.
           tnCesLLTable 1.3.6.1.4.1.868.2.5.60.1.12 no-access
Table of logical link configuration.
                 tnCesLLEntry 1.3.6.1.4.1.868.2.5.60.1.12.1 no-access
Each entry has the current configuration of a logical link.
                     tnCesLLNumber 1.3.6.1.4.1.868.2.5.60.1.12.1.1 unsigned32 no-access
The logical link number.
                     tnCesLLname 1.3.6.1.4.1.868.2.5.60.1.12.1.2 displaystring read-write
An optional name for the logical link.
                     tnCesLLDirection 1.3.6.1.4.1.868.2.5.60.1.12.1.3 integer read-write
Direction of data flow over the packet network for a logical link. Enumeration: 'both': 3, 'disable': 0, 'rx': 1, 'tx': 2.
                     tnCesLLRemoteIpAddrType 1.3.6.1.4.1.868.2.5.60.1.12.1.4 inetaddresstype read-write
The IP address type of the remote end of the logical link. Must be ipv4 or ipv6.
                     tnCesLLRemoteIpAddr 1.3.6.1.4.1.868.2.5.60.1.12.1.5 inetaddress read-write
The IP address of the remote end of the logical link. If tnCesLLDirection is tx or both then this may be a unicast or multicast address. If tnCesLLDirection is rx then this must be a unicast address.
                     tnCesLLSecondaryRemoteIpAddrType 1.3.6.1.4.1.868.2.5.60.1.12.1.6 inetaddresstype read-write
The secondary IP address type of the remote end of the logical link. Must be ipv4 or ipv6.
                     tnCesLLSecondaryRemoteIpAddr 1.3.6.1.4.1.868.2.5.60.1.12.1.7 inetaddress read-write
The secondary IP address of the remote end of the logical link. If tnCesLLDirection is tx or both then this may be a unicast or multicast address. If tnCesLLDirection is rx then this must be a unicast address.
                     tnCesLLQosType 1.3.6.1.4.1.868.2.5.60.1.12.1.8 integer read-write
Whether logical link QOS is encoded as Type of Service (TOS) or Diffserv. Enumeration: 'tos': 0, 'diffserv': 1.
                     tnCesLLQosTOS 1.3.6.1.4.1.868.2.5.60.1.12.1.9 unsigned32 read-write
Type Of Service value for logical link QOS. Only used when tnCesLLQosType is tos.
                     tnCesLLQosDiffserv 1.3.6.1.4.1.868.2.5.60.1.12.1.10 unsigned32 read-write
Diffserv codepoint value for logical link QOS. Only used when tnCesLLQosType is diffserv.
                     tnCesLLVlanTag 1.3.6.1.4.1.868.2.5.60.1.12.1.11 truthvalue read-write
Whether Ethernet frames for this logical link are VLAN tagged.
                     tnCesLLVlanId 1.3.6.1.4.1.868.2.5.60.1.12.1.12 unsigned32 read-write
VLAN ID for Ethernet frames for this logical link. Only applies when tnCesLLVlanTag is true.
                     tnCesLLVlanPriority 1.3.6.1.4.1.868.2.5.60.1.12.1.13 unsigned32 read-write
Priority value for Ethernet frames for this logical link. Only applies when tnCesLLVlanTag is true.
                     tnCesLLJitterBufferLength 1.3.6.1.4.1.868.2.5.60.1.12.1.14 unsigned32 read-write
Jitter buffer length in ms for this logical link.
                     tnCesLLFramesPerPacket 1.3.6.1.4.1.868.2.5.60.1.12.1.15 unsigned32 read-write
In framed mode, the number of TDM frames in the packet payload for this logical link.
                     tnCesLLRemoteLinkNumber 1.3.6.1.4.1.868.2.5.60.1.12.1.16 unsigned32 read-write
The remote logical link number that this link exchanges packets with.
           tnCesLLSchedTable 1.3.6.1.4.1.868.2.5.60.1.13 no-access
Table of logical link schedule configuration.
                 tnCesLLSchedEntry 1.3.6.1.4.1.868.2.5.60.1.13.1 no-access
Each entry has the current configuration of a logical link schedule.
                     tnCesLLSchedNumber 1.3.6.1.4.1.868.2.5.60.1.13.1.1 unsigned32 no-access
The logical link number.
                     tnCesLLSchedEnable 1.3.6.1.4.1.868.2.5.60.1.13.1.2 truthvalue read-write
Whether to enable the logical link schedule. When false, there is no scheduling and this link is always on. When true, the link is enabled according to its schedule.
                     tnCesLLSchedStartTimeMonHours 1.3.6.1.4.1.868.2.5.60.1.13.1.3 unsigned32 read-write
Hours component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLSchedStartTimeMonMins 1.3.6.1.4.1.868.2.5.60.1.13.1.4 unsigned32 read-write
Minutes component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLSchedStopTimeMonHours 1.3.6.1.4.1.868.2.5.60.1.13.1.5 unsigned32 read-write
Hours component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLSchedStopTimeMonMins 1.3.6.1.4.1.868.2.5.60.1.13.1.6 unsigned32 read-write
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLSchedStartTimeTueHours 1.3.6.1.4.1.868.2.5.60.1.13.1.7 unsigned32 read-write
Hours component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLSchedStartTimeTueMins 1.3.6.1.4.1.868.2.5.60.1.13.1.8 unsigned32 read-write
Minutes component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLSchedStopTimeTueHours 1.3.6.1.4.1.868.2.5.60.1.13.1.9 unsigned32 read-write
Hours component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLSchedStopTimeTueMins 1.3.6.1.4.1.868.2.5.60.1.13.1.10 unsigned32 read-write
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLSchedStartTimeWedHours 1.3.6.1.4.1.868.2.5.60.1.13.1.11 unsigned32 read-write
Hours component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLSchedStartTimeWedMins 1.3.6.1.4.1.868.2.5.60.1.13.1.12 unsigned32 read-write
Minutes component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLSchedStopTimeWedHours 1.3.6.1.4.1.868.2.5.60.1.13.1.13 unsigned32 read-write
Hours component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLSchedStopTimeWedMins 1.3.6.1.4.1.868.2.5.60.1.13.1.14 unsigned32 read-write
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLSchedStartTimeThuHours 1.3.6.1.4.1.868.2.5.60.1.13.1.15 unsigned32 read-write
Hours component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLSchedStartTimeThuMins 1.3.6.1.4.1.868.2.5.60.1.13.1.16 unsigned32 read-write
Minutes component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLSchedStopTimeThuHours 1.3.6.1.4.1.868.2.5.60.1.13.1.17 unsigned32 read-write
Hours component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLSchedStopTimeThuMins 1.3.6.1.4.1.868.2.5.60.1.13.1.18 unsigned32 read-write
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLSchedStartTimeFriHours 1.3.6.1.4.1.868.2.5.60.1.13.1.19 unsigned32 read-write
Hours component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLSchedStartTimeFriMins 1.3.6.1.4.1.868.2.5.60.1.13.1.20 unsigned32 read-write
Minutes component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLSchedStopTimeFriHours 1.3.6.1.4.1.868.2.5.60.1.13.1.21 unsigned32 read-write
Hours component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLSchedStopTimeFriMins 1.3.6.1.4.1.868.2.5.60.1.13.1.22 unsigned32 read-write
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLSchedStartTimeSatHours 1.3.6.1.4.1.868.2.5.60.1.13.1.23 unsigned32 read-write
Hours component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLSchedStartTimeSatMins 1.3.6.1.4.1.868.2.5.60.1.13.1.24 unsigned32 read-write
Minutes component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLSchedStopTimeSatHours 1.3.6.1.4.1.868.2.5.60.1.13.1.25 unsigned32 read-write
Hours component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLSchedStopTimeSatMins 1.3.6.1.4.1.868.2.5.60.1.13.1.26 unsigned32 read-write
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLSchedStartTimeSunHours 1.3.6.1.4.1.868.2.5.60.1.13.1.27 unsigned32 read-write
Hours component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLSchedStartTimeSunMins 1.3.6.1.4.1.868.2.5.60.1.13.1.28 unsigned32 read-write
Minutes component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLSchedStopTimeSunHours 1.3.6.1.4.1.868.2.5.60.1.13.1.29 unsigned32 read-write
Hours component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLSchedStopTimeSunMins 1.3.6.1.4.1.868.2.5.60.1.13.1.30 unsigned32 read-write
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
           tnCesLLJATable 1.3.6.1.4.1.868.2.5.60.1.14 no-access
Table of logical link dynamic jitter buffer adjustment configuration.
                 tnCesLLJAEntry 1.3.6.1.4.1.868.2.5.60.1.14.1 no-access
Each entry has the current dynamic jitter adjustment configuration of a logical link.
                     tnCesLLJANumber 1.3.6.1.4.1.868.2.5.60.1.14.1.1 unsigned32 no-access
The logical link number.
                     tnCesLLJitterAdjustmentMode 1.3.6.1.4.1.868.2.5.60.1.14.1.2 integer read-write
The mode in which automatic jitter buffer adustment is to be run. None - No automatic adjuistment of the jitter buffer will be carried out for this logical link. Always - Automatic jitter buffer adjustment is carried out periodically for this logical link while it is active. Schedule - Automatic jitter buffer adjustment is carried out periodically while this link is active during the specified schedule times. Once - Automatic jitter buffer adjustment is carried out once after this logical link becomes active. Enumeration: 'always': 1, 'none': 0, 'schedule': 2, 'once': 3.
                     tnCesLLJitterAdjustmentAfter 1.3.6.1.4.1.868.2.5.60.1.14.1.3 unsigned32 read-write
How long to wait in minutes before doing any jitter buffer adjustment once the logical link has become active. Only used when tnCesLLJitterAdjustmentMode is always or once.
                     tnCesLLJASchedStartTimeMonHours 1.3.6.1.4.1.868.2.5.60.1.14.1.4 unsigned32 read-write
Hours component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLJASchedStartTimeMonMins 1.3.6.1.4.1.868.2.5.60.1.14.1.5 unsigned32 read-write
Minutes component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLJASchedStopTimeMonHours 1.3.6.1.4.1.868.2.5.60.1.14.1.6 unsigned32 read-write
Hours component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLJASchedStopTimeMonMins 1.3.6.1.4.1.868.2.5.60.1.14.1.7 unsigned32 read-write
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLJASchedStartTimeTueHours 1.3.6.1.4.1.868.2.5.60.1.14.1.8 unsigned32 read-write
Hours component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLJASchedStartTimeTueMins 1.3.6.1.4.1.868.2.5.60.1.14.1.9 unsigned32 read-write
Minutes component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLJASchedStopTimeTueHours 1.3.6.1.4.1.868.2.5.60.1.14.1.10 unsigned32 read-write
Hours component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLJASchedStopTimeTueMins 1.3.6.1.4.1.868.2.5.60.1.14.1.11 unsigned32 read-write
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLJASchedStartTimeWedHours 1.3.6.1.4.1.868.2.5.60.1.14.1.12 unsigned32 read-write
Hours component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLJASchedStartTimeWedMins 1.3.6.1.4.1.868.2.5.60.1.14.1.13 unsigned32 read-write
Minutes component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLJASchedStopTimeWedHours 1.3.6.1.4.1.868.2.5.60.1.14.1.14 unsigned32 read-write
Hours component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLJASchedStopTimeWedMins 1.3.6.1.4.1.868.2.5.60.1.14.1.15 unsigned32 read-write
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLJASchedStartTimeThuHours 1.3.6.1.4.1.868.2.5.60.1.14.1.16 unsigned32 read-write
Hours component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLJASchedStartTimeThuMins 1.3.6.1.4.1.868.2.5.60.1.14.1.17 unsigned32 read-write
Minutes component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLJASchedStopTimeThuHours 1.3.6.1.4.1.868.2.5.60.1.14.1.18 unsigned32 read-write
Hours component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLJASchedStopTimeThuMins 1.3.6.1.4.1.868.2.5.60.1.14.1.19 unsigned32 read-write
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLJASchedStartTimeFriHours 1.3.6.1.4.1.868.2.5.60.1.14.1.20 unsigned32 read-write
Hours component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLJASchedStartTimeFriMins 1.3.6.1.4.1.868.2.5.60.1.14.1.21 unsigned32 read-write
Minutes component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLJASchedStopTimeFriHours 1.3.6.1.4.1.868.2.5.60.1.14.1.22 unsigned32 read-write
Hours component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLJASchedStopTimeFriMins 1.3.6.1.4.1.868.2.5.60.1.14.1.23 unsigned32 read-write
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLJASchedStartTimeSatHours 1.3.6.1.4.1.868.2.5.60.1.14.1.24 unsigned32 read-write
Hours component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLJASchedStartTimeSatMins 1.3.6.1.4.1.868.2.5.60.1.14.1.25 unsigned32 read-write
Minutes component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLJASchedStopTimeSatHours 1.3.6.1.4.1.868.2.5.60.1.14.1.26 unsigned32 read-write
Hours component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLJASchedStopTimeSatMins 1.3.6.1.4.1.868.2.5.60.1.14.1.27 unsigned32 read-write
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLJASchedStartTimeSunHours 1.3.6.1.4.1.868.2.5.60.1.14.1.28 unsigned32 read-write
Hours component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLJASchedStartTimeSunMins 1.3.6.1.4.1.868.2.5.60.1.14.1.29 unsigned32 read-write
Minutes component of schedule start time. The start time must not be later than the stop time.
                     tnCesLLJASchedStopTimeSunHours 1.3.6.1.4.1.868.2.5.60.1.14.1.30 unsigned32 read-write
Hours component of schedule stop time. The stop time must not be earlier than the start time.
                     tnCesLLJASchedStopTimeSunMins 1.3.6.1.4.1.868.2.5.60.1.14.1.31 unsigned32 read-write
Minutes component of schedule stop time. The stop time must not be earlier than the start time.
           tnCesLLChanSelectTable 1.3.6.1.4.1.868.2.5.60.1.15 no-access
Table of TDM channels selected for a logical link.
                 tnCesLLChanSelectEntry 1.3.6.1.4.1.868.2.5.60.1.15.1 no-access
Each entry has the channel selection configuration of a logical link.
                     tnCesLLChanSelectLLNumber 1.3.6.1.4.1.868.2.5.60.1.15.1.1 unsigned32 no-access
The logical link number.
                     tnCesLLChanSelectPortNumber 1.3.6.1.4.1.868.2.5.60.1.15.1.2 unsigned32 no-access
The TDM or RS530 port number.
                     tnCesLLChanSelectAvailable 1.3.6.1.4.1.868.2.5.60.1.15.1.3 unsigned32 read-only
Bitmap of whether each channel on this TDM port is available for use by this logical link. Channels are unavailable if they unavailable in the TDM port configuration (full/fractional/E1/T1) or are already selected for another logical link. Bit 0 is for the first channel, bit one for the second, etc.
                     tnCesLLChanSelectUsed 1.3.6.1.4.1.868.2.5.60.1.15.1.4 unsigned32 read-write
Bitmap of whether each channel on this TDM port is assigned for use by this logical link. A channel cannot be assigned to a logical link if the channel is unavailable in the TDM port configuration (full/fractional/E1/T1), the channel is already assigned to another logical link, the channel is on a different TDM port from other channels in this link, or the logical link would have more than 32 channels assigned. Bit 0 is for the first channel, bit one for the second, etc. For products with RS530 ports, this item is ignored. The channels used will be configured automatically from the serial port bitrate whenever this table entry is updated.
           tnCesLLAlternateTable 1.3.6.1.4.1.868.2.5.60.1.16 no-access
Table of logical link configuration items for the alternate clocking mode.
                 tnCesLLAlternateEntry 1.3.6.1.4.1.868.2.5.60.1.16.1 no-access
Each entry has the logical link configuration for the alternate clocking mode.
                     tnCesLLAlternateLLNumber 1.3.6.1.4.1.868.2.5.60.1.16.1.1 unsigned32 no-access
The clocking stream / logical link number.
                     tnCesLLPlesiosynchronous 1.3.6.1.4.1.868.2.5.60.1.16.1.2 truthvalue read-write
Whether clocking for stream is plesiosynchronous. Only used when tnCesClockingAlternateEnable is true.
                     tnCesLLAsymmetric 1.3.6.1.4.1.868.2.5.60.1.16.1.3 truthvalue read-write
Asymmetric clocking mode. Only applies when the associated TDM port is full and when tnCesClockingAlternateEnable is true.
                     tnCesLLBytesPerPacketRx 1.3.6.1.4.1.868.2.5.60.1.16.1.4 unsigned32 read-write
In unframed mode, the number of bytes in the packet payload for the logical link in the receive direction.
                     tnCesLLBytesPerPacketTx 1.3.6.1.4.1.868.2.5.60.1.16.1.5 unsigned32 read-write
In unframed mode, the number of bytes in the packet payload for the logical link in the transmit direction.
           tnCesLLStatusTable 1.3.6.1.4.1.868.2.5.60.1.17 no-access
Table of logical link status.
                 tnCesLLStatusEntry 1.3.6.1.4.1.868.2.5.60.1.17.1 no-access
Each entry has the current status of a logical link.
                     tnCesLLStatusNumber 1.3.6.1.4.1.868.2.5.60.1.17.1.1 unsigned32 no-access
The logical link number.
                     tnCesLLStatusEnabled 1.3.6.1.4.1.868.2.5.60.1.17.1.2 truthvalue read-only
Whether the logical link is enabled for use.
                     tnCesLLStatusActive 1.3.6.1.4.1.868.2.5.60.1.17.1.3 truthvalue read-only
Whether the logical link is active.
                     tnCesLLStatusArpResolved 1.3.6.1.4.1.868.2.5.60.1.17.1.4 truthvalue read-only
Whether address resolution has been completed for the logical link.
                     tnCesLLStatusNumberOfChannels 1.3.6.1.4.1.868.2.5.60.1.17.1.5 unsigned32 read-only
The number of TDM channels being transported by this logical link.
                     tnCesLLStatusRemoteMac 1.3.6.1.4.1.868.2.5.60.1.17.1.6 macaddress read-only
The MAC address of the remote end of the logical link, or the gateway MAC address when the remote end is on a different IP subnet.
                     tnCesLLStatusRemoteIpAddrType 1.3.6.1.4.1.868.2.5.60.1.17.1.7 inetaddresstype read-only
The IP address type of the remote end of the logical link.
                     tnCesLLStatusRemoteIpAddr 1.3.6.1.4.1.868.2.5.60.1.17.1.8 inetaddress read-only
The IP address of the remote end of the logical link.
                     tnCesLLStatusRemoteContextKnown 1.3.6.1.4.1.868.2.5.60.1.17.1.9 truthvalue read-only
Whether the logical link number on the remote end is known.
                     tnCesLLStatusRemoteContextNumber 1.3.6.1.4.1.868.2.5.60.1.17.1.10 unsigned32 read-only
The logical link number on the remote end (if known).
                     tnCesLLStatusRemotePortKnown 1.3.6.1.4.1.868.2.5.60.1.17.1.11 truthvalue read-only
Whether the UDP port number of the remote end of the logical link is known.
                     tnCesLLStatusRemotePort 1.3.6.1.4.1.868.2.5.60.1.17.1.12 unsigned32 read-only
The UDP port number of the remote end of the logical link (if known).
                     tnCesLLStatusQueueLengthValid 1.3.6.1.4.1.868.2.5.60.1.17.1.13 truthvalue read-only
Whether the jitter buffer statistics are available for the logical link.
                     tnCesLLStatusMinQueueLength 1.3.6.1.4.1.868.2.5.60.1.17.1.14 unsigned32 read-only
The minimum fill level of the logical link jitter buffer.
                     tnCesLLStatusMaxQueueLength 1.3.6.1.4.1.868.2.5.60.1.17.1.15 unsigned32 read-only
The maximum fill level of the logical link jitter buffer.
                     tnCesLLStatusAveQueueLengthWhole 1.3.6.1.4.1.868.2.5.60.1.17.1.16 unsigned32 read-only
The average fill level of the logical link jitter buffer. Whole part before the decimal point.
                     tnCesLLStatusAveQueueLengthFrac 1.3.6.1.4.1.868.2.5.60.1.17.1.17 unsigned32 read-only
The average fill level of the logical link jitter buffer. Fractional part after the decimal point.
                     tnCesLLStatusEarly 1.3.6.1.4.1.868.2.5.60.1.17.1.18 counter32 read-only
The number of packets which arrived too early to be put into the logical link jitter buffer.
                     tnCesLLStatusLate 1.3.6.1.4.1.868.2.5.60.1.17.1.19 counter32 read-only
The number of packets which arrived too late to be put into the logical link jitter buffer.
                     tnCesLLStatusUnderrun 1.3.6.1.4.1.868.2.5.60.1.17.1.20 counter32 read-only
The number of underruns on the TDM interface caused by missing packets in the logical link jitter buffer.
                     tnCesLLStatusLastSequence 1.3.6.1.4.1.868.2.5.60.1.17.1.21 counter32 read-only
The sequence number of the last packet received for the logical link.
                     tnCesLLStatusPacketsRx 1.3.6.1.4.1.868.2.5.60.1.17.1.22 counter32 read-only
The number of packets received on the logical link.
                     tnCesLLStatusPacketsTx 1.3.6.1.4.1.868.2.5.60.1.17.1.23 counter32 read-only
The number of packets transmitted on the logical link.
                     tnCesLLStatusSlipsReduceCount 1.3.6.1.4.1.868.2.5.60.1.17.1.24 counter32 read-only
The number of times the jitter buffer has been slipped to reduced latency.
                     tnCesLLStatusSlipsExtendCount 1.3.6.1.4.1.868.2.5.60.1.17.1.25 counter32 read-only
The number of times the jitter buffer has been slipped to extend latency.
                     tnCesLLLocalLoop 1.3.6.1.4.1.868.2.5.60.1.17.1.26 truthvalue read-write
Whether the logical link local loop is enabled.
                     tnCesLLRemoteLoop 1.3.6.1.4.1.868.2.5.60.1.17.1.27 truthvalue read-write
Whether the logical link remote loop is enabled.
                     tnCesLLNudge 1.3.6.1.4.1.868.2.5.60.1.17.1.28 integer32 read-write
The number of packets by which to nudge the jitter buffer for this logical link. A positive number extends the latency, a negative number reduces the latency, zero has no effect.
                     tnCesLLResetErrorStats 1.3.6.1.4.1.868.2.5.60.1.17.1.29 truthvalue read-write
Set to true to reset the jitter buffer error counts for this logical link.
           tnCesTDMStatusTable 1.3.6.1.4.1.868.2.5.60.1.18 no-access
Table of TDM port status.
                 tnCesTDMStatusEntry 1.3.6.1.4.1.868.2.5.60.1.18.1 no-access
Each entry has the current status of a TDM port.
                     tnCesTDMStatusNumber 1.3.6.1.4.1.868.2.5.60.1.18.1.1 unsigned32 no-access
The TDM port number.
                     tnCesTDMStatusPhysical 1.3.6.1.4.1.868.2.5.60.1.18.1.2 displaystring read-only
Physical layer state of the TDM port.
                     tnCesTDMStatusRxSignalLevel 1.3.6.1.4.1.868.2.5.60.1.18.1.3 displaystring read-only
Receive signal level on the TDM port.
                     tnCesTDMStatusRxError 1.3.6.1.4.1.868.2.5.60.1.18.1.4 displaystring read-only
Receive error status of the TDM port.
                     tnCesTDMLocalLoop 1.3.6.1.4.1.868.2.5.60.1.18.1.5 truthvalue read-write
Whether the TDM port local loop is enabled.
                     tnCesTDMRemoteLoop 1.3.6.1.4.1.868.2.5.60.1.18.1.6 truthvalue read-write
Whether the TDM port remote loop is enabled.
                     tnCesTDMBreakCalls 1.3.6.1.4.1.868.2.5.60.1.18.1.7 truthvalue read-write
Set to true to break the CES connections or ISDN calls active on this port.
           tnCesCallStatusTable 1.3.6.1.4.1.868.2.5.60.1.19 no-access
Table of calls.
                 tnCesCallStatusEntry 1.3.6.1.4.1.868.2.5.60.1.19.1 no-access
Each entry has the current status of a CES call.
                     tnCesCallStatusNumber 1.3.6.1.4.1.868.2.5.60.1.19.1.1 unsigned32 no-access
The CES call number.
                     tnCesCallStatusStartTime 1.3.6.1.4.1.868.2.5.60.1.19.1.2 dateandtime read-only
Time the call was started.
                     tnCesCallStatusSource 1.3.6.1.4.1.868.2.5.60.1.19.1.3 displaystring read-only
Source interface of the call.
                     tnCesCallStatusDestination 1.3.6.1.4.1.868.2.5.60.1.19.1.4 displaystring read-only
Destination interface of the call.
                     tnCesCallStatusOriginator 1.3.6.1.4.1.868.2.5.60.1.19.1.5 truthvalue read-only
Whether this system originated the call.
                     tnCesCallStatusDestinationNumber 1.3.6.1.4.1.868.2.5.60.1.19.1.6 displaystring read-only
Destination number of the call.
                     tnCesCallStatusSourceNumber 1.3.6.1.4.1.868.2.5.60.1.19.1.7 displaystring read-only
Source number of the call.
                     tnCesCallStatusState 1.3.6.1.4.1.868.2.5.60.1.19.1.8 displaystring read-only
State of the call.
           tnCesClockStatusTable 1.3.6.1.4.1.868.2.5.60.1.20 no-access
Table of clock recovery status.
                 tnCesClockStatusEntry 1.3.6.1.4.1.868.2.5.60.1.20.1 no-access
Each entry has the current status of a CES clock stream.
                     tnCesClockStatusStreamNumber 1.3.6.1.4.1.868.2.5.60.1.20.1.1 unsigned32 no-access
The CES clock stream number.
                     tnCesClockStatusStreamStatus 1.3.6.1.4.1.868.2.5.60.1.20.1.2 integer read-only
Status of the clock recovery on the clock stream. Enumeration: 'acquired': 3, 'freerun': 0, 'acquiring': 2, 'holdover': 1.
                     tnCesClockStatusStreamMode 1.3.6.1.4.1.868.2.5.60.1.20.1.3 integer read-only
The clock recovery algorithm running on the clock stream, or disabled if no clock recovery is running. Enumeration: 'adaptiveFrequency': 3, 'adaptive': 1, 'adaptiveEnhanced': 2, 'clockRecoveryDisabled': 0.
                     tnCesClockStatusStreamDCO 1.3.6.1.4.1.868.2.5.60.1.20.1.4 integer32 read-only
Recovered clock frequency offset in PPB. NB Limited to 32 bit range.
                     tnCesClockStatusStreamDCOMin 1.3.6.1.4.1.868.2.5.60.1.20.1.5 integer32 read-only
Minimum value of the recovered clock frequency offset in PPB. NB Limited to 32 bit range.
                     tnCesClockStatusStreamDCOMax 1.3.6.1.4.1.868.2.5.60.1.20.1.6 integer32 read-only
Maximum value of the recovered clock frequency offset in PPB. NB Limited to 32 bit range.
                     tnCesClockStatusStreamDCOAvg 1.3.6.1.4.1.868.2.5.60.1.20.1.7 integer32 read-only
Average value of the recovered clock frequency offset in PPB. NB Limited to 32 bit range.
           tnCesDebug 1.3.6.1.4.1.868.2.5.60.1.21
                 tnCesDebugTDMTable 1.3.6.1.4.1.868.2.5.60.1.21.1 no-access
Table of TDM port debug settings.
                     tnCesDebugTDMEntry 1.3.6.1.4.1.868.2.5.60.1.21.1.1 no-access
Each entry has the debug setting for a TDM port.
                         tnCesDebugTDMPortNumber 1.3.6.1.4.1.868.2.5.60.1.21.1.1.1 unsigned32 no-access
The TDM port number.
                         tnCesDebugTDMPortEnable 1.3.6.1.4.1.868.2.5.60.1.21.1.1.2 truthvalue read-write
Whether to enable (true) or disable (false) debug on this TDM port.
                 tnCesDebugLLTable 1.3.6.1.4.1.868.2.5.60.1.21.2 no-access
Table of logical link debug settings.
                     tnCesDebugLLEntry 1.3.6.1.4.1.868.2.5.60.1.21.2.1 no-access
Each entry has the current debug setting for a logical link.
                         tnCesDebugLLNumber 1.3.6.1.4.1.868.2.5.60.1.21.2.1.1 unsigned32 no-access
The logical link number.
                         tnCesDebugLLEnable 1.3.6.1.4.1.868.2.5.60.1.21.2.1.2 truthvalue read-write
Whether to enable (true) or disable (false) debug on this logical link.
                 tnCesDebugMiscTable 1.3.6.1.4.1.868.2.5.60.1.21.3 no-access
Table of miscellaneous debug settings.
                     tnCesDebugMiscEntry 1.3.6.1.4.1.868.2.5.60.1.21.3.1 no-access
Each entry has the current debug setting for a miscellaneous item.
                         tnCesDebugMiscItem 1.3.6.1.4.1.868.2.5.60.1.21.3.1.1 integer no-access
The debug item to enable or disable. Enumeration: 'control': 1, 'arp': 2, 'logicalLinkControl': 4, 'sip': 3, 'logicalLinkGlobal': 5.
                         tnCesDebugMiscEnable 1.3.6.1.4.1.868.2.5.60.1.21.3.1.2 truthvalue read-write
Whether to enable (true) or disable (false) debug for this item.
           tnCesRS530Table 1.3.6.1.4.1.868.2.5.60.1.22 no-access
Table of RS530 serial ports.
                 tnCesRS530Entry 1.3.6.1.4.1.868.2.5.60.1.22.1 no-access
Each entry has the configuration for a RS530 serial port.
                     tnCesRS530PortNumber 1.3.6.1.4.1.868.2.5.60.1.22.1.1 unsigned32 no-access
The RS530 serial port number.
                     tnCesRS530Rate 1.3.6.1.4.1.868.2.5.60.1.22.1.2 unsigned32 read-write
The RS530 serial port bit rate in bits per second. Valid rates are 64K to 2048K in 64K steps, or one of the following subrates: 38400, 19200, 9600, 4800, 2400.
                     tnCesRS530ShutdownCallsOnFail 1.3.6.1.4.1.868.2.5.60.1.22.1.3 truthvalue read-write
Whether to shutdown the CES connections using this port when the port fails.
           tnCesRS530StatusTable 1.3.6.1.4.1.868.2.5.60.1.23 no-access
Table of RS530 serial port status.
                 tnCesRS530StatusEntry 1.3.6.1.4.1.868.2.5.60.1.23.1 no-access
Each entry has the current status of a RS530 serial port.
                     tnCesRS530StatusNumber 1.3.6.1.4.1.868.2.5.60.1.23.1.1 unsigned32 no-access
The RS530 serial port number.
                     tnCesRS530InterfaceType 1.3.6.1.4.1.868.2.5.60.1.23.1.2 displaystring read-only
Describes the type of physical interface used by the RS530 serial.
                     tnCesRS530StatusDTR 1.3.6.1.4.1.868.2.5.60.1.23.1.3 truthvalue read-only
Status of the RS530 serial port C/DTR lead.
                     tnCesRS530StatusDCD 1.3.6.1.4.1.868.2.5.60.1.23.1.4 truthvalue read-only
Status of the RS530 serial port I/DCD lead.
                     tnCesRS530StatusRTS 1.3.6.1.4.1.868.2.5.60.1.23.1.5 truthvalue read-only
Status of the RS530 serial port RTS lead.
                     tnCesRS530StatusCTS 1.3.6.1.4.1.868.2.5.60.1.23.1.6 truthvalue read-only
Status of the RS530 serial port CTS lead.
                     tnCesRS530StatusDSR 1.3.6.1.4.1.868.2.5.60.1.23.1.7 truthvalue read-only
Status of the RS530 serial port DSR lead.
                     tnCesRS530LocalLoop 1.3.6.1.4.1.868.2.5.60.1.23.1.8 truthvalue read-write
Whether the RS530 serial port local loop is enabled.
                     tnCesRS530RemoteLoop 1.3.6.1.4.1.868.2.5.60.1.23.1.9 truthvalue read-write
Whether the RS530 port remote loop is enabled.
                     tnCesRS530BreakCalls 1.3.6.1.4.1.868.2.5.60.1.23.1.10 truthvalue read-write
Set to true to break the CES connections or ISDN calls active on this port.
       tnCesConformance 1.3.6.1.4.1.868.2.5.60.2
           tnCesCompliances 1.3.6.1.4.1.868.2.5.60.2.1
               tnCesMIBCompliance 1.3.6.1.4.1.868.2.5.60.2.1.1
You will comply. Respect my authority!
           tnCesGroups 1.3.6.1.4.1.868.2.5.60.2.2
               tnCesGroup 1.3.6.1.4.1.868.2.5.60.2.2.1
Objects which implement CES support on a device.
               tnCesTrapGroup 1.3.6.1.4.1.868.2.5.60.2.2.2
Notifications which implement CES support on a device.