TELDAT-TRAP-X28-MIB: View SNMP OID List / Download MIB

VENDOR: TELDAT, S.A.


 Home MIB: TELDAT-TRAP-X28-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, TELDAT-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 x28TrapsMIB 1.3.6.1.4.1.2007.1.4.200
This Module Information Base file is defined for managing received SNMP notifications generated by the X28 event subsystem.
         x28EventsGroup 1.3.6.1.4.1.2007.1.4.200.1
             x28EventObjects1 1.3.6.1.4.1.2007.1.4.200.1.1
Event X28.1 Detailed Data send to serial interface.
                 x281_interface 1.3.6.1.4.1.2007.1.4.200.1.1.1 displaystring no-access
Parameter 'interface' in event X28.1
                 x281_lenght 1.3.6.1.4.1.2007.1.4.200.1.1.2 integer32 no-access
Parameter 'lenght' in event X28.1
                 x281_state 1.3.6.1.4.1.2007.1.4.200.1.1.3 integer32 no-access
Parameter 'state' in event X28.1
                 x281_hex_data 1.3.6.1.4.1.2007.1.4.200.1.1.4 displaystring no-access
Parameter 'hex_data' in event X28.1
             x28EventObjects2 1.3.6.1.4.1.2007.1.4.200.1.2
Event X28.2 Detailed Data received from serial interface.
                 x282_interface 1.3.6.1.4.1.2007.1.4.200.1.2.1 displaystring no-access
Parameter 'interface' in event X28.2
                 x282_lenght 1.3.6.1.4.1.2007.1.4.200.1.2.2 integer32 no-access
Parameter 'lenght' in event X28.2
                 x282_state 1.3.6.1.4.1.2007.1.4.200.1.2.3 integer32 no-access
Parameter 'state' in event X28.2
                 x282_hex_data 1.3.6.1.4.1.2007.1.4.200.1.2.4 displaystring no-access
Parameter 'hex_data' in event X28.2
             x28EventObjects3 1.3.6.1.4.1.2007.1.4.200.1.3
Event X28.3 A change ON/OFF has been detected in Serial Control Signal Input.
                 x283_message_type 1.3.6.1.4.1.2007.1.4.200.1.3.1 displaystring no-access
Parameter 'message_type' in event X28.3
                 x283_interface 1.3.6.1.4.1.2007.1.4.200.1.3.2 displaystring no-access
Parameter 'interface' in event X28.3
                 x283_state 1.3.6.1.4.1.2007.1.4.200.1.3.3 integer32 no-access
Parameter 'state' in event X28.3
             x28EventObjects4 1.3.6.1.4.1.2007.1.4.200.1.4
Event X28.4 BREAK signal has been received from serial interface.
                 x284_interface 1.3.6.1.4.1.2007.1.4.200.1.4.1 displaystring no-access
Parameter 'interface' in event X28.4
                 x284_state 1.3.6.1.4.1.2007.1.4.200.1.4.2 integer32 no-access
Parameter 'state' in event X28.4
             x28EventObjects5 1.3.6.1.4.1.2007.1.4.200.1.5
Event X28.5 Session not found, when data has been received from serial interface.
                 x285_interface 1.3.6.1.4.1.2007.1.4.200.1.5.1 displaystring no-access
Parameter 'interface' in event X28.5
             x28EventObjects6 1.3.6.1.4.1.2007.1.4.200.1.6
Event X28.6 X28 command has been received from serial interface.
                 x286_rx_cmd 1.3.6.1.4.1.2007.1.4.200.1.6.1 displaystring no-access
Parameter 'rx_cmd' in event X28.6
                 x286_interface 1.3.6.1.4.1.2007.1.4.200.1.6.2 displaystring no-access
Parameter 'interface' in event X28.6
                 x286_state 1.3.6.1.4.1.2007.1.4.200.1.6.3 integer32 no-access
Parameter 'state' in event X28.6
         x28Notifications 1.3.6.1.4.1.2007.1.4.200.2
             x28NotificationsPrefix 1.3.6.1.4.1.2007.1.4.200.2.0
                 x28Notification1 1.3.6.1.4.1.2007.1.4.200.2.0.1
Notification of Event X28.1 Message: 'Data transmitted to serial interface $1 ($2 bytes, st $3):$4' Parameters list: $1: x281_interface $2: x281_lenght $3: x281_state $4: x281_hex_data Detailed Data send to serial interface.
                 x28Notification2 1.3.6.1.4.1.2007.1.4.200.2.0.2
Notification of Event X28.2 Message: 'Data received from serial interface $1 ($2 bytes, st $3):$4' Parameters list: $1: x282_interface $2: x282_lenght $3: x282_state $4: x282_hex_data Detailed Data received from serial interface.
                 x28Notification3 1.3.6.1.4.1.2007.1.4.200.2.0.3
Notification of Event X28.3 Message: 'Serial Control Signal Input change to $1, interface $2 state $3' Parameters list: $1: x283_message_type $2: x283_interface $3: x283_state A change ON/OFF has been detected in Serial Control Signal Input.
                 x28Notification4 1.3.6.1.4.1.2007.1.4.200.2.0.4
Notification of Event X28.4 Message: 'Received BREAK signal from ifc $1, state $2' Parameters list: $1: x284_interface $2: x284_state BREAK signal has been received from serial interface.
                 x28Notification5 1.3.6.1.4.1.2007.1.4.200.2.0.5
Notification of Event X28.5 Message: 'In-Data serial data, session not found ifc $1' Parameters list: $1: x285_interface Session not found, when data has been received from serial interface.
                 x28Notification6 1.3.6.1.4.1.2007.1.4.200.2.0.6
Notification of Event X28.6 Message: 'Received command $1 from interface $2 state $3' Parameters list: $1: x286_rx_cmd $2: x286_interface $3: x286_state X28 command has been received from serial interface.