TELDAT-TRAP-SL-MIB: View SNMP OID List / Download MIB

VENDOR: TELDAT, S.A.


 Home MIB: TELDAT-TRAP-SL-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 slTrapsMIB 1.3.6.1.4.1.2007.1.4.83
This Module Information Base file is defined for managing received SNMP notifications generated by the SL event subsystem.
       slEventsGroup 1.3.6.1.4.1.2007.1.4.83.1
           slEventObjects1 1.3.6.1.4.1.2007.1.4.83.1.1
Event SL.1 A packet buffer was not available when the interface self-test needed one.
               sl1_interface 1.3.6.1.4.1.2007.1.4.83.1.1.1 displaystring no-access
Parameter 'interface' in event SL.1
           slEventObjects2 1.3.6.1.4.1.2007.1.4.83.1.2
Event SL.2 During the self-test, the interface card detected that certain signals from modem necessary to indicate that it is present and ready to operate were not detectable.
               sl2_interface 1.3.6.1.4.1.2007.1.4.83.1.2.1 displaystring no-access
Parameter 'interface' in event SL.2
           slEventObjects3 1.3.6.1.4.1.2007.1.4.83.1.3
Event SL.3 During self-test, an Echo Acknowledgement was not received from the other end of the line within the timeout period. The network fails self-test.
               sl3_interface 1.3.6.1.4.1.2007.1.4.83.1.3.1 displaystring no-access
Parameter 'interface' in event SL.3
           slEventObjects4 1.3.6.1.4.1.2007.1.4.83.1.4
Event SL.4 A bad length field or truncated packet was detected in a DECnet packet on the serial line.
               sl4_actual_length 1.3.6.1.4.1.2007.1.4.83.1.4.1 integer32 no-access
Parameter 'actual_length' in event SL.4
               sl4_claimed_length 1.3.6.1.4.1.2007.1.4.83.1.4.2 integer32 no-access
Parameter 'claimed_length' in event SL.4
               sl4_interface 1.3.6.1.4.1.2007.1.4.83.1.4.3 displaystring no-access
Parameter 'interface' in event SL.4
           slEventObjects5 1.3.6.1.4.1.2007.1.4.83.1.5
Event SL.5 A network control packet was received with a packet type which did not match any known opcode.
               sl5_opcode 1.3.6.1.4.1.2007.1.4.83.1.5.1 integer32 no-access
Parameter 'opcode' in event SL.5
               sl5_interface 1.3.6.1.4.1.2007.1.4.83.1.5.2 displaystring no-access
Parameter 'interface' in event SL.5
           slEventObjects6 1.3.6.1.4.1.2007.1.4.83.1.6
Event SL.6 A serial line packet was received with a higher level protocol which did not match any known protocol.
               sl6_protocol 1.3.6.1.4.1.2007.1.4.83.1.6.1 integer32 no-access
Parameter 'protocol' in event SL.6
               sl6_interface 1.3.6.1.4.1.2007.1.4.83.1.6.2 displaystring no-access
Parameter 'interface' in event SL.6
           slEventObjects7 1.3.6.1.4.1.2007.1.4.83.1.7
Event SL.7 Self-test is being started on the serial line.
               sl7_interface 1.3.6.1.4.1.2007.1.4.83.1.7.1 displaystring no-access
Parameter 'interface' in event SL.7
           slEventObjects8 1.3.6.1.4.1.2007.1.4.83.1.8
Event SL.8 An echo request is being sent on the serial line.
               sl8_interface 1.3.6.1.4.1.2007.1.4.83.1.8.1 displaystring no-access
Parameter 'interface' in event SL.8
           slEventObjects9 1.3.6.1.4.1.2007.1.4.83.1.9
Event SL.9 A test packet has been received on the serial line.
               sl9_interface 1.3.6.1.4.1.2007.1.4.83.1.9.1 displaystring no-access
Parameter 'interface' in event SL.9
           slEventObjects10 1.3.6.1.4.1.2007.1.4.83.1.10
Event SL.10 An echo acknowledgement packet has been received on the serial line.
                 sl10_interface 1.3.6.1.4.1.2007.1.4.83.1.10.1 displaystring no-access
Parameter 'interface' in event SL.10
           slEventObjects11 1.3.6.1.4.1.2007.1.4.83.1.11
Event SL.11 An echo acknowledgement packet has been received on the serial line.
                 sl11_interface 1.3.6.1.4.1.2007.1.4.83.1.11.1 displaystring no-access
Parameter 'interface' in event SL.11
           slEventObjects12 1.3.6.1.4.1.2007.1.4.83.1.12
Event SL.12 A test packet used for network maintenence is being sent on the serial line.
                 sl12_interface 1.3.6.1.4.1.2007.1.4.83.1.12.1 displaystring no-access
Parameter 'interface' in event SL.12
           slEventObjects13 1.3.6.1.4.1.2007.1.4.83.1.13
Event SL.13 A Bridged packet is received on this serial line interface even though the Spanning Tree Bridging is not enabled on this interface or STB is disabled in the box.
                 sl13_interface 1.3.6.1.4.1.2007.1.4.83.1.13.1 displaystring no-access
Parameter 'interface' in event SL.13
           slEventObjects14 1.3.6.1.4.1.2007.1.4.83.1.14
Event SL.14 Dual Serial Line Interface board firmware download has completed with the status shown.
                 sl14_slot_num 1.3.6.1.4.1.2007.1.4.83.1.14.1 integer32 no-access
Parameter 'slot_num' in event SL.14
                 sl14_ld_code 1.3.6.1.4.1.2007.1.4.83.1.14.2 displaystring no-access
Parameter 'ld_code' in event SL.14
           slEventObjects15 1.3.6.1.4.1.2007.1.4.83.1.15
Event SL.15 Dual Serial Line Board Power-On Diagnostics status completed with the code shown. See Power-On Diagnostics manual for encoding.
                 sl15_slot_num 1.3.6.1.4.1.2007.1.4.83.1.15.1 integer32 no-access
Parameter 'slot_num' in event SL.15
                 sl15_pud_stat 1.3.6.1.4.1.2007.1.4.83.1.15.2 integer32 no-access
Parameter 'pud_stat' in event SL.15
           slEventObjects16 1.3.6.1.4.1.2007.1.4.83.1.16
Event SL.16 Protocol type like Ethertype, DSAPytype or SNAPtype packet filtered. This is due to the user supplied protocol filtering information. (STB).
                 sl16_protocol_type 1.3.6.1.4.1.2007.1.4.83.1.16.1 displaystring no-access
Parameter 'protocol_type' in event SL.16
                 sl16_protocol 1.3.6.1.4.1.2007.1.4.83.1.16.2 integer32 no-access
Parameter 'protocol' in event SL.16
                 sl16_interface 1.3.6.1.4.1.2007.1.4.83.1.16.3 displaystring no-access
Parameter 'interface' in event SL.16
           slEventObjects17 1.3.6.1.4.1.2007.1.4.83.1.17
Event SL.17 Packet dropped as the protocol type is enabled but packet arrived as bridged. (STB).
                 sl17_protocol_type 1.3.6.1.4.1.2007.1.4.83.1.17.1 integer32 no-access
Parameter 'protocol_type' in event SL.17
                 sl17_src_addr 1.3.6.1.4.1.2007.1.4.83.1.17.2 displaystring no-access
Parameter 'src_addr' in event SL.17
                 sl17_interface 1.3.6.1.4.1.2007.1.4.83.1.17.3 displaystring no-access
Parameter 'interface' in event SL.17
           slEventObjects18 1.3.6.1.4.1.2007.1.4.83.1.18
Event SL.18 Packet dropped as the protocol filtering applies (STB).
                 sl18_protocol_type 1.3.6.1.4.1.2007.1.4.83.1.18.1 integer32 no-access
Parameter 'protocol_type' in event SL.18
                 sl18_interface 1.3.6.1.4.1.2007.1.4.83.1.18.2 displaystring no-access
Parameter 'interface' in event SL.18
           slEventObjects19 1.3.6.1.4.1.2007.1.4.83.1.19
Event SL.19 The cable and the level converter on the interface are not compatible with each other. The self-test will fail.
                 sl19_cable_type 1.3.6.1.4.1.2007.1.4.83.1.19.1 displaystring no-access
Parameter 'cable_type' in event SL.19
                 sl19_level_converter_type 1.3.6.1.4.1.2007.1.4.83.1.19.2 displaystring no-access
Parameter 'level_converter_type' in event SL.19
                 sl19_interface 1.3.6.1.4.1.2007.1.4.83.1.19.3 displaystring no-access
Parameter 'interface' in event SL.19
           slEventObjects20 1.3.6.1.4.1.2007.1.4.83.1.20
Event SL.20 There is an incompatibility between the mode of the cable (DCE or DTE) and the type of clocking used. The interface will not be brought up.
                 sl20_cable_type 1.3.6.1.4.1.2007.1.4.83.1.20.1 displaystring no-access
Parameter 'cable_type' in event SL.20
                 sl20_internal_external 1.3.6.1.4.1.2007.1.4.83.1.20.2 displaystring no-access
Parameter 'internal_external' in event SL.20
                 sl20_interface 1.3.6.1.4.1.2007.1.4.83.1.20.3 displaystring no-access
Parameter 'interface' in event SL.20
           slEventObjects21 1.3.6.1.4.1.2007.1.4.83.1.21
Event SL.21 The interface failed self test because at least one of the modem signals was off.
                 sl21_cts 1.3.6.1.4.1.2007.1.4.83.1.21.1 displaystring no-access
Parameter 'cts' in event SL.21
                 sl21_dsr 1.3.6.1.4.1.2007.1.4.83.1.21.2 displaystring no-access
Parameter 'dsr' in event SL.21
                 sl21_dcd 1.3.6.1.4.1.2007.1.4.83.1.21.3 displaystring no-access
Parameter 'dcd' in event SL.21
                 sl21_interface 1.3.6.1.4.1.2007.1.4.83.1.21.4 displaystring no-access
Parameter 'interface' in event SL.21
           slEventObjects22 1.3.6.1.4.1.2007.1.4.83.1.22
Event SL.22 A modem status change has occurred. The present state is described.
                 sl22_cts 1.3.6.1.4.1.2007.1.4.83.1.22.1 displaystring no-access
Parameter 'cts' in event SL.22
                 sl22_dsr 1.3.6.1.4.1.2007.1.4.83.1.22.2 displaystring no-access
Parameter 'dsr' in event SL.22
                 sl22_dcd 1.3.6.1.4.1.2007.1.4.83.1.22.3 displaystring no-access
Parameter 'dcd' in event SL.22
                 sl22_interface 1.3.6.1.4.1.2007.1.4.83.1.22.4 displaystring no-access
Parameter 'interface' in event SL.22
           slEventObjects23 1.3.6.1.4.1.2007.1.4.83.1.23
Event SL.23 The interface was brought down because one of the modem signals was off.
                 sl23_cts 1.3.6.1.4.1.2007.1.4.83.1.23.1 displaystring no-access
Parameter 'cts' in event SL.23
                 sl23_dsr 1.3.6.1.4.1.2007.1.4.83.1.23.2 displaystring no-access
Parameter 'dsr' in event SL.23
                 sl23_dcd 1.3.6.1.4.1.2007.1.4.83.1.23.3 displaystring no-access
Parameter 'dcd' in event SL.23
                 sl23_interface 1.3.6.1.4.1.2007.1.4.83.1.23.4 displaystring no-access
Parameter 'interface' in event SL.23
           slEventObjects24 1.3.6.1.4.1.2007.1.4.83.1.24
Event SL.24 The user-configured frame size for this interface is larger than the maximum that is allowed for the particular serial line device. The size is reduced to the largest allowable one.
                 sl24_configured_size 1.3.6.1.4.1.2007.1.4.83.1.24.1 integer32 no-access
Parameter 'configured_size' in event SL.24
                 sl24_maximum_size 1.3.6.1.4.1.2007.1.4.83.1.24.2 integer32 no-access
Parameter 'maximum_size' in event SL.24
                 sl24_interface 1.3.6.1.4.1.2007.1.4.83.1.24.3 displaystring no-access
Parameter 'interface' in event SL.24
           slEventObjects25 1.3.6.1.4.1.2007.1.4.83.1.25
Event SL.25 A bad length field or truncated packet was detected in a SRT bridge packet.
                 sl25_actual_length 1.3.6.1.4.1.2007.1.4.83.1.25.1 integer32 no-access
Parameter 'actual_length' in event SL.25
                 sl25_claimed_length 1.3.6.1.4.1.2007.1.4.83.1.25.2 integer32 no-access
Parameter 'claimed_length' in event SL.25
                 sl25_interface 1.3.6.1.4.1.2007.1.4.83.1.25.3 displaystring no-access
Parameter 'interface' in event SL.25
           slEventObjects26 1.3.6.1.4.1.2007.1.4.83.1.26
Event SL.26 An Incoming Serial Line packet is shorter than a minimally required Serial Line header. Such packet can not be processed and hence freed.
                 sl26_actual_length 1.3.6.1.4.1.2007.1.4.83.1.26.1 integer32 no-access
Parameter 'actual_length' in event SL.26
                 sl26_interface 1.3.6.1.4.1.2007.1.4.83.1.26.2 displaystring no-access
Parameter 'interface' in event SL.26
           slEventObjects27 1.3.6.1.4.1.2007.1.4.83.1.27
Event SL.27 There is no level converter on this port of the Quad Serial Line card. The self-test will fail, and future self-tests will be cancelled.
                 sl27_interface 1.3.6.1.4.1.2007.1.4.83.1.27.1 displaystring no-access
Parameter 'interface' in event SL.27
           slEventObjects28 1.3.6.1.4.1.2007.1.4.83.1.28
Event SL.28 There is a level converter of an unknown type on this port of the Quad Serial Line card. The self-test will fail, and future self-tests will be cancelled.
                 sl28_converter_type 1.3.6.1.4.1.2007.1.4.83.1.28.1 integer32 no-access
Parameter 'converter_type' in event SL.28
                 sl28_interface 1.3.6.1.4.1.2007.1.4.83.1.28.2 displaystring no-access
Parameter 'interface' in event SL.28
           slEventObjects29 1.3.6.1.4.1.2007.1.4.83.1.29
Event SL.29 The user-configured frame size for this interface is smaller than the minimum that is required for the particular serial line device. The size is increased to the minimum allowable one.
                 sl29_configured_size 1.3.6.1.4.1.2007.1.4.83.1.29.1 integer32 no-access
Parameter 'configured_size' in event SL.29
                 sl29_minimum_size 1.3.6.1.4.1.2007.1.4.83.1.29.2 integer32 no-access
Parameter 'minimum_size' in event SL.29
                 sl29_interface 1.3.6.1.4.1.2007.1.4.83.1.29.3 displaystring no-access
Parameter 'interface' in event SL.29
           slEventObjects30 1.3.6.1.4.1.2007.1.4.83.1.30
Event SL.30 The maintenance routine is attempting to send a maintenance frame for Proteon Serial data-link, but the buffer for sending this has not been freed since the previous maintenance. If this happens 3 times in a row, maintenance will fail at the other end of the serial line.
                 sl30_interface 1.3.6.1.4.1.2007.1.4.83.1.30.1 displaystring no-access
Parameter 'interface' in event SL.30
           slEventObjects31 1.3.6.1.4.1.2007.1.4.83.1.31
Event SL.31 A buffer could not be allocated when needed to read the statistics counters from the Dual Serial interface. The counters should be successfully updated at the next maintenance, 4 seconds later.
                 sl31_interface 1.3.6.1.4.1.2007.1.4.83.1.31.1 displaystring no-access
Parameter 'interface' in event SL.31
           slEventObjects32 1.3.6.1.4.1.2007.1.4.83.1.32
Event SL.32 The allocation of a packet buffer for a DNX 300 serial line failed. This may be due to a shortage of either buffer memory or heap memory. (See the output of ELS messages GW.061, GW.063, and GW.064). The interface will still try and come up, but with a reduced number of receive packet buffers.
                 sl32_buffer_number 1.3.6.1.4.1.2007.1.4.83.1.32.1 integer32 no-access
Parameter 'buffer_number' in event SL.32
                 sl32_interface 1.3.6.1.4.1.2007.1.4.83.1.32.2 displaystring no-access
Parameter 'interface' in event SL.32
           slEventObjects33 1.3.6.1.4.1.2007.1.4.83.1.33
Event SL.33 A packet buffer was allocated for the DNX 300 serial line, but that buffer crossed a 64 Kbyte memory boundary in the buffer memory. Since all of the receive buffers for a DNX 300 serial line must be in the same 64 Kbyte buffer memory packet, that buffer will be ignored, and no further buffers will be allocated for the device. The interface will still try and come up, but with a reduced number of receive packet buffers.
                 sl33_buffer_number 1.3.6.1.4.1.2007.1.4.83.1.33.1 integer32 no-access
Parameter 'buffer_number' in event SL.33
                 sl33_interface 1.3.6.1.4.1.2007.1.4.83.1.33.2 displaystring no-access
Parameter 'interface' in event SL.33
           slEventObjects34 1.3.6.1.4.1.2007.1.4.83.1.34
Event SL.34 The system does not detect an adapter cable in the network interface port. Self-test will fail.
                 sl34_interface 1.3.6.1.4.1.2007.1.4.83.1.34.1 displaystring no-access
Parameter 'interface' in event SL.34
           slEventObjects35 1.3.6.1.4.1.2007.1.4.83.1.35
Event SL.35 A protocol that cannot be bridged by Proteon Serial Line's PSEUDO- ETHERNET bridging method has been configured over an interface using PSL PSEUDO-ETH.
                 sl35_protocol_name 1.3.6.1.4.1.2007.1.4.83.1.35.1 displaystring no-access
Parameter 'protocol_name' in event SL.35
                 sl35_protocol_number 1.3.6.1.4.1.2007.1.4.83.1.35.2 integer32 no-access
Parameter 'protocol_number' in event SL.35
                 sl35_interface 1.3.6.1.4.1.2007.1.4.83.1.35.3 displaystring no-access
Parameter 'interface' in event SL.35
           slEventObjects36 1.3.6.1.4.1.2007.1.4.83.1.36
Event SL.36 The interface is on mode loopback or echo and the timeout as expired.
                 sl36_interface 1.3.6.1.4.1.2007.1.4.83.1.36.1 displaystring no-access
Parameter 'interface' in event SL.36
       slNotifications 1.3.6.1.4.1.2007.1.4.83.2
           slNotificationsPrefix 1.3.6.1.4.1.2007.1.4.83.2.0
               slNotification1 1.3.6.1.4.1.2007.1.4.83.2.0.1
Notification of Event SL.1 Message: 'no buffer available for selftest interface $1' Parameters list: $1: sl1_interface A packet buffer was not available when the interface self-test needed one.
               slNotification2 1.3.6.1.4.1.2007.1.4.83.2.0.2
Notification of Event SL.2 Message: 'modem error with no DCD/DTS detected during selftest interface $1' Parameters list: $1: sl2_interface During the self-test, the interface card detected that certain signals from modem necessary to indicate that it is present and ready to operate were not detectable.
               slNotification3 1.3.6.1.4.1.2007.1.4.83.2.0.3
Notification of Event SL.3 Message: 'no echo acknowledgement received, timeout selftest interface $1' Parameters list: $1: sl3_interface During self-test, an Echo Acknowledgement was not received from the other end of the line within the timeout period. The network fails self-test.
               slNotification4 1.3.6.1.4.1.2007.1.4.83.2.0.4
Notification of Event SL.4 Message: 'bad length in DECNet packet actual $1 claimed $2 interface $3' Parameters list: $1: sl4_actual_length $2: sl4_claimed_length $3: sl4_interface A bad length field or truncated packet was detected in a DECnet packet on the serial line.
               slNotification5 1.3.6.1.4.1.2007.1.4.83.2.0.5
Notification of Event SL.5 Message: 'bad received packet header opcode $1 interface $2' Parameters list: $1: sl5_opcode $2: sl5_interface A network control packet was received with a packet type which did not match any known opcode.
               slNotification6 1.3.6.1.4.1.2007.1.4.83.2.0.6
Notification of Event SL.6 Message: 'bad received packet header protocol $1 interface $2' Parameters list: $1: sl6_protocol $2: sl6_interface A serial line packet was received with a higher level protocol which did not match any known protocol.
               slNotification7 1.3.6.1.4.1.2007.1.4.83.2.0.7
Notification of Event SL.7 Message: 'start selftest interface $1' Parameters list: $1: sl7_interface Self-test is being started on the serial line.
               slNotification8 1.3.6.1.4.1.2007.1.4.83.2.0.8
Notification of Event SL.8 Message: 'send echo packet interface $1' Parameters list: $1: sl8_interface An echo request is being sent on the serial line.
               slNotification9 1.3.6.1.4.1.2007.1.4.83.2.0.9
Notification of Event SL.9 Message: 'receive test packet interface $1' Parameters list: $1: sl9_interface A test packet has been received on the serial line.
               slNotification10 1.3.6.1.4.1.2007.1.4.83.2.0.10
Notification of Event SL.10 Message: 'receive echo acknowledgement packet interface $1' Parameters list: $1: sl10_interface An echo acknowledgement packet has been received on the serial line.
               slNotification11 1.3.6.1.4.1.2007.1.4.83.2.0.11
Notification of Event SL.11 Message: 'receive echo request packet interface $1' Parameters list: $1: sl11_interface An echo acknowledgement packet has been received on the serial line.
               slNotification12 1.3.6.1.4.1.2007.1.4.83.2.0.12
Notification of Event SL.12 Message: 'sending maintenance test packet interface $1' Parameters list: $1: sl12_interface A test packet used for network maintenence is being sent on the serial line.
               slNotification13 1.3.6.1.4.1.2007.1.4.83.2.0.13
Notification of Event SL.13 Message: 'Dropping the received Spanning Tree Bridged packet but bridging is disabled on interface $1' Parameters list: $1: sl13_interface A Bridged packet is received on this serial line interface even though the Spanning Tree Bridging is not enabled on this interface or STB is disabled in the box.
               slNotification14 1.3.6.1.4.1.2007.1.4.83.2.0.14
Notification of Event SL.14 Message: 'Dual Serial Line board in slot $1 firmware download $2' Parameters list: $1: sl14_slot_num $2: sl14_ld_code Dual Serial Line Interface board firmware download has completed with the status shown.
               slNotification15 1.3.6.1.4.1.2007.1.4.83.2.0.15
Notification of Event SL.15 Message: 'Dual Serial Line board slot $1 Power-On Diagnostics status $2' Parameters list: $1: sl15_slot_num $2: sl15_pud_stat Dual Serial Line Board Power-On Diagnostics status completed with the code shown. See Power-On Diagnostics manual for encoding.
               slNotification16 1.3.6.1.4.1.2007.1.4.83.2.0.16
Notification of Event SL.16 Message: '$1 type pakcet filtered for protocol = $2 interface $3' Parameters list: $1: sl16_protocol_type $2: sl16_protocol $3: sl16_interface Protocol type like Ethertype, DSAPytype or SNAPtype packet filtered. This is due to the user supplied protocol filtering information. (STB).
               slNotification17 1.3.6.1.4.1.2007.1.4.83.2.0.17
Notification of Event SL.17 Message: 'Dropped, protocol = $1 enabled but packet arrived as bridged from address $2, interface $3' Parameters list: $1: sl17_protocol_type $2: sl17_src_addr $3: sl17_interface Packet dropped as the protocol type is enabled but packet arrived as bridged. (STB).
               slNotification18 1.3.6.1.4.1.2007.1.4.83.2.0.18
Notification of Event SL.18 Message: 'Dropped, dsap = $1, Protocol filtreing applies, interface $2' Parameters list: $1: sl18_protocol_type $2: sl18_interface Packet dropped as the protocol filtering applies (STB).
               slNotification19 1.3.6.1.4.1.2007.1.4.83.2.0.19
Notification of Event SL.19 Message: 'Cable of type $1 is not compatible with level converter of type $2, interface $3' Parameters list: $1: sl19_cable_type $2: sl19_level_converter_type $3: sl19_interface The cable and the level converter on the interface are not compatible with each other. The self-test will fail.
               slNotification20 1.3.6.1.4.1.2007.1.4.83.2.0.20
Notification of Event SL.20 Message: '$1 cable cannot be used with $2 clocking enabled, interface $3' Parameters list: $1: sl20_cable_type $2: sl20_internal_external $3: sl20_interface There is an incompatibility between the mode of the cable (DCE or DTE) and the type of clocking used. The interface will not be brought up.
               slNotification21 1.3.6.1.4.1.2007.1.4.83.2.0.21
Notification of Event SL.21 Message: 'Self test failed because of modem status, CTS = $1, DSR = $2, DCD = $3, ifc $4' Parameters list: $1: sl21_cts $2: sl21_dsr $3: sl21_dcd $4: sl21_interface The interface failed self test because at least one of the modem signals was off.
               slNotification22 1.3.6.1.4.1.2007.1.4.83.2.0.22
Notification of Event SL.22 Message: 'Modem status change CTS = $1, DSR = $2, DCD = $3, on interface $4' Parameters list: $1: sl22_cts $2: sl22_dsr $3: sl22_dcd $4: sl22_interface A modem status change has occurred. The present state is described.
               slNotification23 1.3.6.1.4.1.2007.1.4.83.2.0.23
Notification of Event SL.23 Message: 'Interface down because of modem status, CTS = $1, DSR = $2, DCD = $3, ifc $4' Parameters list: $1: sl23_cts $2: sl23_dsr $3: sl23_dcd $4: sl23_interface The interface was brought down because one of the modem signals was off.
               slNotification24 1.3.6.1.4.1.2007.1.4.83.2.0.24
Notification of Event SL.24 Message: 'Configured frame size of $1 bytes too large, reducing to $2 bytes, interface $3' Parameters list: $1: sl24_configured_size $2: sl24_maximum_size $3: sl24_interface The user-configured frame size for this interface is larger than the maximum that is allowed for the particular serial line device. The size is reduced to the largest allowable one.
               slNotification25 1.3.6.1.4.1.2007.1.4.83.2.0.25
Notification of Event SL.25 Message: 'bad length in SRT packet actual $1 claimed $2 interface $3' Parameters list: $1: sl25_actual_length $2: sl25_claimed_length $3: sl25_interface A bad length field or truncated packet was detected in a SRT bridge packet.
               slNotification26 1.3.6.1.4.1.2007.1.4.83.2.0.26
Notification of Event SL.26 Message: 'Packet received is shorter than Serial line header, actual $1 interface $2' Parameters list: $1: sl26_actual_length $2: sl26_interface An Incoming Serial Line packet is shorter than a minimally required Serial Line header. Such packet can not be processed and hence freed.
               slNotification27 1.3.6.1.4.1.2007.1.4.83.2.0.27
Notification of Event SL.27 Message: 'No level converter, disabling interface $1' Parameters list: $1: sl27_interface There is no level converter on this port of the Quad Serial Line card. The self-test will fail, and future self-tests will be cancelled.
               slNotification28 1.3.6.1.4.1.2007.1.4.83.2.0.28
Notification of Event SL.28 Message: 'Unknown level converter type $1, disabling interface $2' Parameters list: $1: sl28_converter_type $2: sl28_interface There is a level converter of an unknown type on this port of the Quad Serial Line card. The self-test will fail, and future self-tests will be cancelled.
               slNotification29 1.3.6.1.4.1.2007.1.4.83.2.0.29
Notification of Event SL.29 Message: 'Configured frame size of $1 bytes too small, increasing to $2 bytes, interface $3' Parameters list: $1: sl29_configured_size $2: sl29_minimum_size $3: sl29_interface The user-configured frame size for this interface is smaller than the minimum that is required for the particular serial line device. The size is increased to the minimum allowable one.
               slNotification30 1.3.6.1.4.1.2007.1.4.83.2.0.30
Notification of Event SL.30 Message: 'Maintenance buffer busy, interface $1' Parameters list: $1: sl30_interface The maintenance routine is attempting to send a maintenance frame for Proteon Serial data-link, but the buffer for sending this has not been freed since the previous maintenance. If this happens 3 times in a row, maintenance will fail at the other end of the serial line.
               slNotification31 1.3.6.1.4.1.2007.1.4.83.2.0.31
Notification of Event SL.31 Message: 'No packet for reading counters, interface $1' Parameters list: $1: sl31_interface A buffer could not be allocated when needed to read the statistics counters from the Dual Serial interface. The counters should be successfully updated at the next maintenance, 4 seconds later.
               slNotification32 1.3.6.1.4.1.2007.1.4.83.2.0.32
Notification of Event SL.32 Message: 'Packet buffer allocation number $1 failed, interface $2' Parameters list: $1: sl32_buffer_number $2: sl32_interface The allocation of a packet buffer for a DNX 300 serial line failed. This may be due to a shortage of either buffer memory or heap memory. (See the output of ELS messages GW.061, GW.063, and GW.064). The interface will still try and come up, but with a reduced number of receive packet buffers.
               slNotification33 1.3.6.1.4.1.2007.1.4.83.2.0.33
Notification of Event SL.33 Message: 'Packet buffer number $1 crossed 64 Kbyte page boundary, dropped, ifc $2' Parameters list: $1: sl33_buffer_number $2: sl33_interface A packet buffer was allocated for the DNX 300 serial line, but that buffer crossed a 64 Kbyte memory boundary in the buffer memory. Since all of the receive buffers for a DNX 300 serial line must be in the same 64 Kbyte buffer memory packet, that buffer will be ignored, and no further buffers will be allocated for the device. The interface will still try and come up, but with a reduced number of receive packet buffers.
               slNotification34 1.3.6.1.4.1.2007.1.4.83.2.0.34
Notification of Event SL.34 Message: 'No cable installed or installed cable broken or non-compatible, interface $1' Parameters list: $1: sl34_interface The system does not detect an adapter cable in the network interface port. Self-test will fail.
               slNotification35 1.3.6.1.4.1.2007.1.4.83.2.0.35
Notification of Event SL.35 Message: 'Protocol $1 ($2) can not be bridged over Proteon Serial Line using the pseudo-ethernet bridging method. Interface $3' Parameters list: $1: sl35_protocol_name $2: sl35_protocol_number $3: sl35_interface A protocol that cannot be bridged by Proteon Serial Line's PSEUDO- ETHERNET bridging method has been configured over an interface using PSL PSEUDO-ETH.
               slNotification36 1.3.6.1.4.1.2007.1.4.83.2.0.36
Notification of Event SL.36 Message: 'warning: test on ifc $1' Parameters list: $1: sl36_interface The interface is on mode loopback or echo and the timeout as expired.