TED-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: TED-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, FLOAT-TC-MIB, IANA-GMPLS-TC-MIB, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 tedMIB 1.3.6.1.2.1.10.273
This MIB module contains managed object definitions for TED in support of MPLS/GMPLS TE Database. Copyright (c) 2013 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info).
         tedNotifications 1.3.6.1.2.1.10.273.0
             tedStatusChange 1.3.6.1.2.1.10.273.0.1
This notification signifies that there has been change in the TE information of tedTable, tedLocalIfAddrTable, tedRemoteIfAddrTable, tedSwCapTable, and/or tedSrlgTable. For example, this should be generated when tedUnreservedBandwidth is changed to create or delete LSP using the registered TE link.
             tedEntryCreated 1.3.6.1.2.1.10.273.0.2
This notification signifies that there has been new registration in the TED table by receiving new TE link information. For example, this should be generated when a new index (tedLinkIndex) is registered in the TED table.
             tedEntryDeleted 1.3.6.1.2.1.10.273.0.3
This notification signifies that there has been deletion of an entry in the TED table. For example, this should be generated when one of the existing entries is deleted in the TED table.
         tedObjects 1.3.6.1.2.1.10.273.1
             tedTable 1.3.6.1.2.1.10.273.1.1 no-access
This table indicates multiple TED information, which has been supported by RFC 3630 and RFC 5305.
                 tedEntry 1.3.6.1.2.1.10.273.1.1.1 no-access
This entry contains TED information commonly utilized in both MPLS and GMPLS.
                     tedLinkInformationSource 1.3.6.1.2.1.10.273.1.1.1.1 integer no-access
This object indicates the source of the information about the TE link. Enumeration: 'isis': 4, 'unknown': 0, 'ospfv2': 2, 'ospfv3': 3, 'other': 5, 'locallyConfigured': 1.
                     tedLocalRouterId 1.3.6.1.2.1.10.273.1.1.1.2 tedrouteridtc no-access
This object represents the Router ID of the router originating the LSA. If OSPF is used to advertise LSA, this represents a Router ID. If IS-IS is used, this represents a System ID. Otherwise, this represents zero.
                     tedRemoteRouterId 1.3.6.1.2.1.10.273.1.1.1.3 tedrouteridtc no-access
This object indicates the router at the remote end of the link from the originating router. If OSPF is used to advertise LSA, this represents a Link ID in the Link TLV. If IS-IS is used, this represents a neighbor System ID defined in RFC 5305. Otherwise, this represents zero.
                     tedLinkIndex 1.3.6.1.2.1.10.273.1.1.1.4 tedlinkindextc no-access
This object indicates the link state identifier. If OSPF is used, this represents an ospfLsdbID. If IS-IS is used, this represents an isisLSPID. Otherwise, this represents a unique identifier within a node.
                     tedLinkInformationData 1.3.6.1.2.1.10.273.1.1.1.5 rowpointer read-only
If tedLinkInformationSource has the value unknown(0), this object MUST contain a value of zeroDotZero. If tedLinkInformationSource has the value locallyConfigured(1), an implementation can use this object to supply the identifier of the corresponding row entry in the teLinkTable of TE-LINK- STD-MIB (RFC 4220), the identifier of the corresponding row in a local proprietary TE link MIB module, or the value of zeroDotZero. If tedLinkInformationSource has the value ospfv2(2) and ospfv3(3), an implementation can use this object to supply the identifier of the corresponding row entry in the ospfLocalLsdbTable (OSPFv2-MIB) and the ospfv3AreaLsdbTable (OSPFv3-MIB), or the value of zeroDotZero. If tedLinkInformationSource has the value isis(4), an implementation can use this object to supply the identifier of the corresponding row entry in the isisAreaAddr of ISIS-MIB (RFC 4444), or the value of zeroDotZero. If tedLinkInformationSource has the value other(5), an implementation can use this object to supply the identifier of the corresponding row entry in the local proprietary MIB module, or the value of zeroDotZero.
                     tedLinkState 1.3.6.1.2.1.10.273.1.1.1.6 integer read-only
This object represents the actual operational state of this TE link. For instance, if a row is created in the TED table, but the actual TE link is not available for some reason (e.g., when there is not yet a physical link or the link has been manually disabled), then the object would be down(2) state. In contrast, if a row is added and the TE link is available, this would be operationally up(1). Enumeration: 'down': 2, 'unknown': 0, 'up': 1.
                     tedAreaId 1.3.6.1.2.1.10.273.1.1.1.7 tedareaidtc read-only
This object indicates the area identifier of the IGP. If OSPF is used to advertise LSA, this represents an ospfArea. If IS-IS is used, this represents an area address. Otherwise, this represents zero.
                     tedLinkType 1.3.6.1.2.1.10.273.1.1.1.8 integer read-only
This indicates the type of the link, such as point to point or multi-access. Enumeration: 'multiAccess': 2, 'pointToPoint': 1.
                     tedTeRouterIdAddrType 1.3.6.1.2.1.10.273.1.1.1.9 inetaddresstype read-only
This object indicates the TE-Router ID address type. Only values unknown(0), ipv4(1), or ipv6(2) are supported.
                     tedTeRouterIdAddr 1.3.6.1.2.1.10.273.1.1.1.10 inetaddress read-only
This object indicates the TE-Router ID.
                     tedLinkIdAddrType 1.3.6.1.2.1.10.273.1.1.1.11 inetaddresstype read-only
This object indicates the address type of the TE Link ID. Only values unknown(0), ipv4(1), or ipv6(2) are supported.
                     tedLinkIdAddr 1.3.6.1.2.1.10.273.1.1.1.12 inetaddress read-only
This indicates the Router ID of the neighbor in the case of point-to-point links. This also indicates the interface address of the designated router in the case of multi-access links.
                     tedMetric 1.3.6.1.2.1.10.273.1.1.1.13 integer32 read-only
This indicates the traffic engineering metric value of the TE link.
                     tedMaxBandwidth 1.3.6.1.2.1.10.273.1.1.1.14 float32tc read-only
This indicates the maximum bandwidth that can be used on this link in this direction.
                     tedMaxReservableBandwidth 1.3.6.1.2.1.10.273.1.1.1.15 float32tc read-only
This indicates the maximum bandwidth that may be reserved on this link in this direction.
                     tedUnreservedBandwidthPri0 1.3.6.1.2.1.10.273.1.1.1.16 float32tc read-only
This indicates the amount of bandwidth not yet reserved at the priority 0.
                     tedUnreservedBandwidthPri1 1.3.6.1.2.1.10.273.1.1.1.17 float32tc read-only
This indicates the amount of bandwidth not yet reserved at the priority 1.
                     tedUnreservedBandwidthPri2 1.3.6.1.2.1.10.273.1.1.1.18 float32tc read-only
This indicates the amount of bandwidth not yet reserved at the priority 2.
                     tedUnreservedBandwidthPri3 1.3.6.1.2.1.10.273.1.1.1.19 float32tc read-only
This indicates the amount of bandwidth not yet reserved at the priority 3.
                     tedUnreservedBandwidthPri4 1.3.6.1.2.1.10.273.1.1.1.20 float32tc read-only
This indicates the amount of bandwidth not yet reserved at the priority 4.
                     tedUnreservedBandwidthPri5 1.3.6.1.2.1.10.273.1.1.1.21 float32tc read-only
This indicates the amount of bandwidth not yet reserved at the priority 5.
                     tedUnreservedBandwidthPri6 1.3.6.1.2.1.10.273.1.1.1.22 float32tc read-only
This indicates the amount of bandwidth not yet reserved at the priority 6.
                     tedUnreservedBandwidthPri7 1.3.6.1.2.1.10.273.1.1.1.23 float32tc read-only
This indicates the amount of bandwidth not yet reserved at the priority 7.
                     tedAdministrativeGroup 1.3.6.1.2.1.10.273.1.1.1.24 integer32 read-only
This indicates the Administrative Group to which the link belongs. Since the value is a bit mask, the link can belong to multiple groups. This is also called Resource Class/Color.
                     tedLocalId 1.3.6.1.2.1.10.273.1.1.1.25 integer32 read-only
This indicates the Link Local Identifier of an unnumbered link.
                     tedRemoteId 1.3.6.1.2.1.10.273.1.1.1.26 integer32 read-only
This indicates the Link Remote Identifier of an unnumbered link.
                     tedLinkProtectionType 1.3.6.1.2.1.10.273.1.1.1.27 bits read-only
This object indicates the protection type of the TE link. Bits: 'dedicatedOneToOne': 3, 'unprotected': 1, 'enhanced': 5, 'shared': 2, 'dedicatedOnePlusOne': 4, 'extraTraffic': 0.
             tedLocalIfAddrTable 1.3.6.1.2.1.10.273.1.2 no-access
This table contains the IP address information of a local TE link.
                 tedLocalIfAddrEntry 1.3.6.1.2.1.10.273.1.2.1 no-access
This entry contains the IP address information of the local TE link.
                     tedLocalIfAddrType 1.3.6.1.2.1.10.273.1.2.1.1 inetaddresstype read-only
This object indicates the address type of the local TE link. Only values unknown(0), ipv4(1), or ipv6(2) have to be supported.
                     tedLocalIfAddr 1.3.6.1.2.1.10.273.1.2.1.2 inetaddress no-access
This object indicates the address of the local TE link.
             tedRemoteIfAddrTable 1.3.6.1.2.1.10.273.1.3 no-access
This table contains the IP address information of a remote TE link.
                 tedRemoteIfAddrEntry 1.3.6.1.2.1.10.273.1.3.1 no-access
This entry contains the IP address information of the remote TE link.
                     tedRemoteIfAddrType 1.3.6.1.2.1.10.273.1.3.1.1 inetaddresstype read-only
This object indicates the address type of the remote TE link.
                     tedRemoteIfAddr 1.3.6.1.2.1.10.273.1.3.1.2 inetaddress no-access
This object indicates the address of the remote TE link.
             tedSwCapTable 1.3.6.1.2.1.10.273.1.4 no-access
This table contains the GMPLS TED switching capability information.
                 tedSwCapEntry 1.3.6.1.2.1.10.273.1.4.1 no-access
This entry relates each TE link with its GMPLS TE switching capability information. If the MIB module deals with only OSPF- TE information, the value of each object related with GMPLS TE extensions should be null.
                     tedSwCapIndex 1.3.6.1.2.1.10.273.1.4.1.1 unsigned32 no-access
This index is utilized to identify multiple switching functions on a local or remote TE link according to definitions of textual conventions of GMPLS, RFC 4801.
                     tedSwCapType 1.3.6.1.2.1.10.273.1.4.1.2 ianagmplsswitchingtypetc read-only
This object indicates the GMPLS switching capability assigned to the TE link according to definitions of textual conventions of GMPLS, RFC 4801.
                     tedSwCapEncoding 1.3.6.1.2.1.10.273.1.4.1.3 ianagmplslspencodingtypetc read-only
This object indicates the GMPLS encoding type assigned to the TE link.
                     tedSwCapMaxLspBandwidthPri0 1.3.6.1.2.1.10.273.1.4.1.4 float32tc read-only
This object indicates the maximum bandwidth of the TE link at the priority 0 for GMPLS LSP creation.
                     tedSwCapMaxLspBandwidthPri1 1.3.6.1.2.1.10.273.1.4.1.5 float32tc read-only
This object indicates the maximum bandwidth of the TE link at the priority 1 for GMPLS LSP creation.
                     tedSwCapMaxLspBandwidthPri2 1.3.6.1.2.1.10.273.1.4.1.6 float32tc read-only
This object indicates the maximum bandwidth of the TE link at the priority 2 for GMPLS LSP creation.
                     tedSwCapMaxLspBandwidthPri3 1.3.6.1.2.1.10.273.1.4.1.7 float32tc read-only
This object indicates the maximum bandwidth of the TE link at the priority 3 for GMPLS LSP creation.
                     tedSwCapMaxLspBandwidthPri4 1.3.6.1.2.1.10.273.1.4.1.8 float32tc read-only
This object indicates the maximum bandwidth of the TE link at the priority 4 for GMPLS LSP creation.
                     tedSwCapMaxLspBandwidthPri5 1.3.6.1.2.1.10.273.1.4.1.9 float32tc read-only
This object indicates the maximum bandwidth of the TE link at the priority 5 for GMPLS LSP creation.
                     tedSwCapMaxLspBandwidthPri6 1.3.6.1.2.1.10.273.1.4.1.10 float32tc read-only
This object indicates the maximum bandwidth of the TE link at the priority 6 for GMPLS LSP creation.
                     tedSwCapMaxLspBandwidthPri7 1.3.6.1.2.1.10.273.1.4.1.11 float32tc read-only
This object indicates the maximum bandwidth of the TE link at the priority 7 for GMPLS LSP creation.
                     tedSwCapMinLspBandwidth 1.3.6.1.2.1.10.273.1.4.1.12 float32tc read-only
This object indicates the minimum bandwidth of the TE link for GMPLS LSP creation if the switching capability field is TDM, PSC-1, PSC-2, PSC-3, or PSC-4.
                     tedSwCapIfMtu 1.3.6.1.2.1.10.273.1.4.1.13 integer32 read-only
This object indicates the MTU of the local or remote TE link.
                     tedSwCapIndication 1.3.6.1.2.1.10.273.1.4.1.14 integer read-only
This object indicates whether the interface supports Standard or Arbitrary SONET/SDH. Enumeration: 'arbitrary': 1, 'standard': 0.
             tedSrlgTable 1.3.6.1.2.1.10.273.1.5 no-access
This table contains the SRLG information of the TE link.
                 tedSrlgEntry 1.3.6.1.2.1.10.273.1.5.1 no-access
This entry relates each TE link with its SRLG information.
                     tedSrlgIndex 1.3.6.1.2.1.10.273.1.5.1.1 unsigned32 no-access
This index is utilized to identify multiple SRLG values on a local or remote TE link. This object represents an arbitrary value, which is locally defined in a router.
                     tedSrlg 1.3.6.1.2.1.10.273.1.5.1.2 integer32 read-only
This object indicates the SRLG value assigned to a local or remote TE link.
             tedStatusChangeNotificationMaxRate 1.3.6.1.2.1.10.273.1.6 unsigned32 read-write
A lot of notifications relating to the status change are expected to generate in a node, especially when a network failure occurs and might cause a performance degradation of the node itself. To avoid such a defect, this object provides the maximum number of notifications generated per minute. If events occur more rapidly, the implementation may simply fail to emit these notifications during that period, or may queue them until an appropriate time. A value of 0 means no throttling is applied and events may be notified at the rate at which they occur.
             tedCreatedDeletedNotificationMaxRate 1.3.6.1.2.1.10.273.1.7 unsigned32 read-write
A lot of notifications relating to new registration in the TED table by receiving new TE link information or deletion of existing entries in the TED table are expected to generate in a node. This object provides the maximum number of notifications generated per minute.
         tedConformance 1.3.6.1.2.1.10.273.2
             tedCompliances 1.3.6.1.2.1.10.273.2.1
                 tedModuleFullCompliance 1.3.6.1.2.1.10.273.2.1.1
Compliance statement for agents provides full support for the TED MIB.
                 tedModuleReadOnlyCompliance 1.3.6.1.2.1.10.273.2.1.2
Compliance requirement for implementations only provides read- only support for TED. Such devices can then be monitored but cannot be configured using this MIB module.
             tedGroups 1.3.6.1.2.1.10.273.2.2
                 tedMainGroup 1.3.6.1.2.1.10.273.2.2.1
Collection of objects for TED management
                 tedObjectsGroup 1.3.6.1.2.1.10.273.2.2.2
The objects needed to implement notification.
                 tedNotificationGroup 1.3.6.1.2.1.10.273.2.2.3
This group is mandatory for those implementations that can implement the notifications contained in this group.
                 tedUnnumberedLinkGroup 1.3.6.1.2.1.10.273.2.2.4
The objects needed to implement the unnumbered links.
                 tedNumberedLinkGroup 1.3.6.1.2.1.10.273.2.2.5
The objects needed to implement the numbered links.
                 tedSwCapGroup 1.3.6.1.2.1.10.273.2.2.6
The objects needed to implement the TE links with GMPLS TE switching capability information.
                 tedSwCapMinLspBandwidthGroup 1.3.6.1.2.1.10.273.2.2.7
The objects needed to implement the minimum bandwidth of the TE link for GMPLS LSP creation.
                 tedSwCapIfMtuGroup 1.3.6.1.2.1.10.273.2.2.8
The objects needed to implement the MTU information of the local or remote TE link.
                 tedSwCapIndicationGroup 1.3.6.1.2.1.10.273.2.2.9
The objects needed to implement the indication of whether the interface supports Standard or Arbitrary SONET/SDH.
                 tedSrlgGroup 1.3.6.1.2.1.10.273.2.2.10
The objects needed to implement multiple SRLG values with GMPLS TE information.