SYSLOG-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: SYSLOG-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 swSysLogMIB 1.3.6.1.4.1.171.12.12
The Structure of System Log Information for the proprietary enterprise.
       swSysLogCtrlState 1.3.6.1.4.1.171.12.12.1 integer read-write
This object can be enabled or disabled functionality of System Log during runtime of the system. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
       swSysLogServerTable 1.3.6.1.4.1.171.12.12.2 no-access
This table contain System Log Server information.
           swSysLogServerEntry 1.3.6.1.4.1.171.12.12.2.1 no-access
A list of information about System Log Server.
               swSysLogServerIndex 1.3.6.1.4.1.171.12.12.2.1.1 integer read-only
The index of System Log Server entry ,and is unique.
               swSysLogServerIPAddress 1.3.6.1.4.1.171.12.12.2.1.2 ipaddress read-only
specifies the IP address of the System Log Server.
               swSysLogServerFacility 1.3.6.1.4.1.171.12.12.2.1.3 integer read-only
syslog Message Facilities Enumeration: 'local5': 5, 'local4': 4, 'local7': 7, 'local6': 6, 'local1': 1, 'local0': 0, 'local3': 3, 'local2': 2.
               swSysLogServerSeverity 1.3.6.1.4.1.171.12.12.2.1.4 integer read-only
syslog Message Severities Enumeration: 'all': 1, 'warning': 2, 'informational': 3.
               swSysLogServerUDPPort 1.3.6.1.4.1.171.12.12.2.1.5 integer read-only
syslog uses the user datagram protocol (UDP) as its underlying tranaposrt layer mechanism. The UDP port that has been assigned to syslog is 514. It is RECOMMENDED that the source port also be 514 to indicate that the message is form the syslog process of the sender, but there have been cases seen where valid syslog messages have come from a sender with a source port other than 514. If the sender uses a source port other than 514 then it is RECOMMENDED and has been considered to be good from that subsequent messages are from a single consistent port.
               swSysLogServerState 1.3.6.1.4.1.171.12.12.2.1.6 integer read-only
enabled or disabled the specific System Log Server during runtime. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
               swSysLogServerRowStatus 1.3.6.1.4.1.171.12.12.2.1.7 rowstatus read-only
indicates the status of this entry. When creating a syslog server entry, the IP address should be set, too.
       swLogSaveCtrl 1.3.6.1.4.1.171.12.12.3
           swLogSaveMethod 1.3.6.1.4.1.171.12.12.3.1 integer read-write
Used to show and configure the method to save log. when set time-interval(1),Save log to flash every swLogSaveTimeInterval minutes. (if no log happened in this period, don't save) when set on-demand(2), save log to flash whenever user type 'save log' or 'save all'. when set log-trigger(3), save log to flash whenever log arrives. Enumeration: 'time-interval': 1, 'on-demand': 2, 'log-trigger': 3.
           swLogSaveTimeInterval 1.3.6.1.4.1.171.12.12.3.2 integer read-write
The time(minutes) interval to save log to flash. It can only be set when you have selected the time-interval(1) in swLogSaveMethod.
       swSysLogCtrl 1.3.6.1.4.1.171.12.12.4
           swSysLogCtrlClearLog 1.3.6.1.4.1.171.12.12.4.1 integer read-write
Clear the switch history log. Enumeration: 'start': 2, 'other': 1.