SYMBOL-DSSS-ENTERPRISE-PRIVATE-MIB: View SNMP OID List / Download MIB

VENDOR: SYMBOL TECHNOLOGIES


 Home MIB: SYMBOL-DSSS-ENTERPRISE-PRIVATE-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, SNMPv2-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
         coldStart 1.3.6.1.2.1.110.0
Access Point cold boot. - apMyMacAddr is the MAC address of the Access Point sending this trap message.
         authenticationFailure 1.3.6.1.2.1.110.4
Invalid SNMP Community string. - apMyMacAddr is the MAC address of the Access Point sending this trap message. - apAPMacAddr is the MAC address of the remote host sending SNMP packet with invalid community.
 symbol 1.3.6.1.4.1.388
         spectrum24 1.3.6.1.4.1.388.1
             dsap 1.3.6.1.4.1.388.1.5
                 apConfigMgmt 1.3.6.1.4.1.388.1.5.1
                     apManufactureInfo 1.3.6.1.4.1.388.1.5.1.1
                         apModelnumber 1.3.6.1.4.1.388.1.5.1.1.1 displaystring read-only
The Model Number of the Access Point device.
                         apSerialnumber 1.3.6.1.4.1.388.1.5.1.1.2 displaystring read-only
The Serial Number of the Access Point system.
                         apHardwareRev 1.3.6.1.4.1.388.1.5.1.1.3 displaystring read-only
The current revision of the Access Point hardware.
                         apMyMacAddr 1.3.6.1.4.1.388.1.5.1.1.4 physaddress read-only
The MAC address of the Access Point.
                         apAPFirmwareRev 1.3.6.1.4.1.388.1.5.1.1.5 displaystring read-only
The current revision of the Access Point firmware.
                         apRFFirmwareRev 1.3.6.1.4.1.388.1.5.1.1.6 displaystring read-only
The current revision of the Access Point radio firmware.
                         apMfgDate 1.3.6.1.4.1.388.1.5.1.1.7 displaystring read-only
The Date this Access Point was manufactured.
                         apHTMLFileRev 1.3.6.1.4.1.388.1.5.1.1.8 displaystring read-only
The current revision of the Access Point HTML file.
                         apVendorID 1.3.6.1.4.1.388.1.5.1.1.9 integer read-only
Displays the Vendor ID of the vendor for which this AP has been manufactured for. The current values are: - Symbol (5) - 3Com (6) - Ericsson (8) - Intel (9) Enumeration: 'symbol': 5, 'ericsson': 8, 'intel': 9, 'threeCom': 6.
                     apSystemConfig 1.3.6.1.4.1.388.1.5.1.2
                         apUnitName 1.3.6.1.4.1.388.1.5.1.2.1 displaystring read-write
An ASCII string to identify this Access Point (up to 31 characters).
                         apMyIPAddr 1.3.6.1.4.1.388.1.5.1.2.2 ipaddress read-write
The IP address for the AP.
                         apSubnetMask 1.3.6.1.4.1.388.1.5.1.2.3 ipaddress read-write
The IP subnet mask for the AP.
                         apGatewayIPAddr 1.3.6.1.4.1.388.1.5.1.2.4 ipaddress read-write
The IP address for the default gateway.
                         apDefaultInterface 1.3.6.1.4.1.388.1.5.1.2.5 integer read-write
Specifies the default interface (Ethernet, PPP or WLAP) for the AP to forward an unknown packet. Default is ethernet(1). Enumeration: 'ethernet': 1, 'wlap': 3, 'ppp': 2.
                         apEnetPortState 1.3.6.1.4.1.388.1.5.1.2.6 integer read-write
Specifies the state of the Ethernet interface. Default is up(1). Enumeration: 'down': 2, 'up': 1.
                         apEthernetTimeOut 1.3.6.1.4.1.388.1.5.1.2.7 integer read-write
If the value is: - 0: the Ethernet Time Out function is disabled. - 1: detect Ethernet timeout by hardware circuitry. - 30-255: Ethernet timeout is detected by software algorithm. When the Ethernet connection is broken and the WLAP mode is either enabled or disabled, the AP will clear the MU table and disable the RF interface until the Etherent connection is up. The following values are only valid when WLAP mode is enabled and it does not matter whetehr WLAP associates with the root AP or not. - 2: send WLAP Alive BPDU on Ethernet interface to let other WLAP on the same Ethernet segment to detect it's existence. - 3: keep track of WLAP Alive BPDU on Ethernet inter- face. If the BPDU is missing for 'WLAP Hello Time' seconds, the Ethernet Activity LEDs will flash and the RF interface is disabled until the WLAP Alive BPDU is received again, then the AP will reset itself. The default value is 0.
                         apTelnetEnable 1.3.6.1.4.1.388.1.5.1.2.8 integer read-write
Enables/Disables Telnet access to the AP. Default is enabled(1). Enumeration: 'disabled': 2, 'enabled': 1.
                         apAccCtrlEnable 1.3.6.1.4.1.388.1.5.1.2.9 integer read-write
Enables/Disables the Access Control function. When it is enabled, a Mobile Unit can associate with the Access Point only if its MAC address is in the Access Control Table. Default is disabled(2). Enumeration: 'disabled': 2, 'enabled': 1.
                         apTypeFilterEnable 1.3.6.1.4.1.388.1.5.1.2.10 integer read-write
Specifies the type of Access Point Type Filtering operation, i.e. Disabled/Forward/Discard. Default is disabled(1). Enumeration: 'disabled': 1, 'forward': 2, 'discard': 3.
                         apWNMPEnable 1.3.6.1.4.1.388.1.5.1.2.13 integer read-write
Enables/Disables Use of the WNMP agent. Default is enabled(1). Enumeration: 'disabled': 2, 'enabled': 1.
                         apAPStateXchgEnable 1.3.6.1.4.1.388.1.5.1.2.14 integer read-write
Enables/Disables exchanging Access Point to Access Point state information by using WNMP protocol. Default is enabled(1). Enumeration: 'disabled': 2, 'enabled': 1.
                         apS24MobileIPEnable 1.3.6.1.4.1.388.1.5.1.2.15 integer read-write
Enables/Disables Spectrum24 Mobile IP support, i.e. AP will act as Mobility Agent. Default is disabled(2). Enumeration: 'disabled': 2, 'enabled': 1.
                         apAgentAdInterval 1.3.6.1.4.1.388.1.5.1.2.16 integer read-write
Interval in second at which Mobility Agent Advertise- ments are sent by the Third Party Mobility Agent(s). AP will cache the Third Party Advertisement and pass it to MU at association time. If AP does not receive the Advertisement within the interval seconds, the cached Advertisement will be deleted. If the interval is 0 or apS24MobileIPEnable is enabled, caching of the Advertisement will not occur. Range (0..1200) 3*Seconds . Default is 0.
                         apWebServerEnable 1.3.6.1.4.1.388.1.5.1.2.17 integer read-write
Enables/Disables Access Point Web Server. When enabled, the Access Point will serve Web clients. Default is enabled(1) Enumeration: 'disabled': 2, 'enabled': 1.
                         apMobileHomeMD5Key 1.3.6.1.4.1.388.1.5.1.2.18 displaystring read-write
The MD5 key is a secret key shared between home agent and the mobile unit. This is used to generate a MD5 checksum, which is used for packet authentication. Length of this variable should not exceed 13 characters.
                         apAdditionalGatewaysTable 1.3.6.1.4.1.388.1.5.1.2.19 no-access
A table of information for additional Gateways. The current number of entries is 7.
                               apAdditionalGatewaysEntry 1.3.6.1.4.1.388.1.5.1.2.19.1 no-access
An entry in the table of information for additional gateways for this access point. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
                                   additionalGatewaysIndex 1.3.6.1.4.1.388.1.5.1.2.19.1.1 integer read-only
Specific Gateway information Table index. Range (1..8).
                                   apAdditionalGatewaysIPAddr 1.3.6.1.4.1.388.1.5.1.2.19.1.2 ipaddress read-write
The IP address of the Gateway used for this AP.
                         apMUMUDisallowed 1.3.6.1.4.1.388.1.5.1.2.20 integer read-write
Controls inter-MU communication. When enabled(on), it will disallow one MU to talk to another MU through RF only. Enumeration: 'on': 1, 'off': 2.
                         apEncryptAdmin 1.3.6.1.4.1.388.1.5.1.2.21 integer read-only
Controls the administration of Encryption keys. This variable could only be modified thru the Serial Interface. Default is any(2). Enumeration: 'serial': 1, 'any': 2.
                     apSNMPInfo 1.3.6.1.4.1.388.1.5.1.3
                         apSNMPMode 1.3.6.1.4.1.388.1.5.1.3.1 integer read-write
Specifies the mode of the SNMP Agent operation, i.e. Disabled/Readonly/ReadWrite. Default is readwrite(3). Enumeration: 'disabled': 1, 'readwrite': 3, 'readonly': 2.
                         apROCommunityName 1.3.6.1.4.1.388.1.5.1.3.2 displaystring read-write
The Read-Only community name of the SNMP command for management station accessing this Access Point (up to 31 characters).
                         apRWCommunityName 1.3.6.1.4.1.388.1.5.1.3.3 displaystring read-write
The Read-Write community name of the SNMP command for management station accessing this Access Point (up to 13 characters). This community name is same as the System Password or Telnet Password. For security purpose, if the management station uses the READ-ONLY community name to access this object, a string of 'xxxxx' will be returned.
                         apTrapHost1IpAdr 1.3.6.1.4.1.388.1.5.1.3.4 ipaddress read-write
Trap receiver's (i.e. Network Manager's) IP address.
                         apAllTrapsEnable 1.3.6.1.4.1.388.1.5.1.3.5 integer read-write
Enables/Disables all SNMP traps. Default is disabled (2). Enumeration: 'disabled': 2, 'enabled': 1.
                         apColdBootTrapEnable 1.3.6.1.4.1.388.1.5.1.3.6 integer read-write
Enables/Disables Access Point Cold Boot trap. Default is disabled(1). This is a generic-trap and the trap code is 0. When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable flag should be enabled for this trap to be issued. Enumeration: 'disabled': 1, 'trapHost1': 2, 'trapHost2': 3, 'all-TrapHosts': 4.
                         apAuthenFailureTrapEnable 1.3.6.1.4.1.388.1.5.1.3.7 integer read-write
Enables/Disables authentication failure trap. Default is disabled(2). This is a generic-trap and the trap code is 4. When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable flag should be enabled for this trap to be issued. Enumeration: 'disabled': 1, 'trapHost1': 2, 'trapHost2': 3, 'all-TrapHosts': 4.
                         apRFTrapEnable 1.3.6.1.4.1.388.1.5.1.3.8 integer read-write
Enables/Disables Access Point RF driver startup trap. Default is disabled(2). This is an enterprise-specific trap and the trap code is 101. When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable flag should be enabled for this trap to be issued. Enumeration: 'disabled': 1, 'trapHost1': 2, 'trapHost2': 3, 'all-TrapHosts': 4.
                         apACLTrapEnable 1.3.6.1.4.1.388.1.5.1.3.9 integer read-write
Enables/Disables Access Control violation trap. Default is disabled(2). This is an enterprise-specific trap and the trap code is 102. When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable flag should be enabled for this trap to be issued. Enumeration: 'disabled': 1, 'trapHost1': 2, 'trapHost2': 3, 'all-TrapHosts': 4.
                         apMUStateChngTrapEnable 1.3.6.1.4.1.388.1.5.1.3.10 integer read-write
Enables/Disables Mobile Unit State Change trap. Default is disabled(1). When not disabled, the following four (2) enterprise-specific traps will be generated and directed to trapHost1, TrapHost2 or all traphosts.: - MU Association Trap, the trap code is 111. - MU Un-association Trap, the trap code is 112. The enabled/disabled state of this trap depends on the state of apAllTrapsEnable. Enumeration: 'disabled': 1, 'trapHost1': 2, 'trapHost2': 3, 'all-TrapHosts': 4.
                         apWLAPConnChngTrapEnable 1.3.6.1.4.1.388.1.5.1.3.11 integer read-write
When Enabled, if there are any WLAP Connection Change, one of four (4) following enterprise-specific traps will be issued. - Root AP Up Trap, the trap code is 121. - Root AP Lost Trap, the trap code is 122. - Designated WLAP Up Trap, the trap code is 123. - Designated WLAP Lost Trap, the trap code is 124. Default is disabled(2). When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable flag should be enabled for this trap to be issued. Enumeration: 'disabled': 1, 'trapHost1': 2, 'trapHost2': 3, 'all-TrapHosts': 4.
                         apDHCPChangeEnable 1.3.6.1.4.1.388.1.5.1.3.12 integer read-write
When Enabled, if there are any DHCP network configuration change, a trap will be issued. Default is disabled(2). When not disabled the trap could be directed to TrapHost1, TrapHost2 or all TrapHosts. The apAllTrapsEnable flag should be enabled for this trap to be issued. Enumeration: 'disabled': 1, 'trapHost1': 2, 'trapHost2': 3, 'all-TrapHosts': 4.
                         apSNMPRequests 1.3.6.1.4.1.388.1.5.1.3.13 counter read-only
Indicates the number of SNMP requests to this SNMP Agent.
                         apSNMPTraps 1.3.6.1.4.1.388.1.5.1.3.14 counter read-only
Indicates the number of Traps that were generated by this SNMP Agent.
                         apTrapHost2IpAdr 1.3.6.1.4.1.388.1.5.1.3.15 ipaddress read-write
Trap receiver's (i.e. Network Manager's) IP address.
                     apRFConfig 1.3.6.1.4.1.388.1.5.1.4
                         apRFPortState 1.3.6.1.4.1.388.1.5.1.4.1 integer read-write
Specifies the state of the RF Interface. Default is up(1). Enumeration: 'down': 2, 'up': 1.
                         apNetID 1.3.6.1.4.1.388.1.5.1.4.2 displaystring read-write
The current RF Network ID for the AP. The Network name can have up to 32 alphanumerical characters.
                         apCountryName 1.3.6.1.4.1.388.1.5.1.4.5 displaystring read-only
The country for which the Access Point radio is configured. It is set at the factory and may not be altered.
                         apAntennaSelect 1.3.6.1.4.1.388.1.5.1.4.6 integer read-write
Select either Primary antenna only (i.e. Disable antenna diversity) or both Primary and Secondary antennas (i.e. Enable antenna diversity-On). Default is diversity-On(2). Enumeration: 'diversity-On': 2, 'primary-only': 1.
                         apBCMCQMax 1.3.6.1.4.1.388.1.5.1.4.8 integer read-write
The maximum size of broadcast/multicast queue. Range (0..32). Default is 10.
                         apReassemblyTimeOut 1.3.6.1.4.1.388.1.5.1.4.9 integer read-write
Sets the time in 0.5 ms units before a timeout occurs during a packet re-assembly. Packet re-assemblies occur when a large Ethernet packet is fragmented into smaller wireless network packets. Range : 0...9999. Default is 9000.
                         apMaxRetries 1.3.6.1.4.1.388.1.5.1.4.10 integer read-write
The maximum number of allowed retries before aborting a single transmission. Range (0..32). Default is 15.
                         apMulticastMask 1.3.6.1.4.1.388.1.5.1.4.11 octet string read-write
Supports broadcast download protocol for Point-of-Sale terminals that load a new operating image over the network instead of using a local non-volatile drive. The multicast mask is the top 32 bits of the MAC address and allows for a series of MAC addresses to receive multicast messages. These messages are transmitted by the AP immediately and not queued for processing at DTIM intervals.
                         apAcceptBCESSID 1.3.6.1.4.1.388.1.5.1.4.14 integer read-write
Enables/Disables the function to accept Broadcast ESS ID. Enabling this feature is NOT recommended. See manual for details. Default is disabled(2). Enumeration: 'disabled': 2, 'enabled': 1.
                         apMUInactivityTimeOut 1.3.6.1.4.1.388.1.5.1.4.15 integer read-write
Allowable Mobile Unit inactivity time in minutes. The time out limit is from 3 to 600 minutes. Default is 60 minutes.
                         apWLAPMode 1.3.6.1.4.1.388.1.5.1.4.16 integer read-write
Enables/Disables Wireless AP capability and set link required option to wireless AP. Once in link-required mode, upon power-up, Root AP requires connection to the Ethernet cable and WLAP requires association with the Root AP and WLAP will keep probing forever. Default is disabled(2). Enumeration: 'disabled': 2, 'link-required': 3, 'enabled': 1.
                         apWLAPPriority 1.3.6.1.4.1.388.1.5.1.4.17 octet string read-write
Provides a user with the influence to determine the Root AP in wireless operation. The priority value is added as the most significant portion of the MAC address to form the WLAP ID. A WLAP with a lower numerical value for priority is more likely to become the Root AP. Priority 0xFFFF is special. It grants the WLAP with roaming capability. Default is 8000 hex from the 0 - 0xFFFF range. Reset AP for value to take effect.
                         apWLAPManualBSSID 1.3.6.1.4.1.388.1.5.1.4.18 physaddress read-write
Specifies the BSS-ID of a particular WLAP and forces the current WLAP to associate only with that WLAP. When WLAP Manaul BSS ID is set to the current WLAP MAC address, the current WLAP jumps into Functional state immediately and waits for an Association Request from the other WLAP. Reset AP for value to take effect.
                         apWLAPHelloTime 1.3.6.1.4.1.388.1.5.1.4.19 integer read-write
Sets the time lapse, in seconds, between Configuration BPDUs (Bridge Protocol Data Unit) sent to the Root AP by a designated WLAP to indicate that it is still alive. Default is 20 seconds. Reset AP for value to take effect. Range: 0..9999.
                         apWLAPMaxAge 1.3.6.1.4.1.388.1.5.1.4.20 integer read-write
Specifies how long, in seconds, a Configuration BPDU (Bridge Protocol Data Unit) is kept by the Root AP before it is judged too old and discarded. Consequently, the interface is considered to be disconnected. Default is 100 seconds. Recommended value is multiple of the WLAP Hello Time. Reset AP for value to take effect. Range: 0..9999.
                         apWLAPFwdDelay 1.3.6.1.4.1.388.1.5.1.4.21 integer read-write
Specifies how long, in seconds, an WLAP is prevented from forwarding data packets to an interface. This delay is to allow the spread of news of a topology change to all parts of a network. Default is 5 seconds. Reset AP for value to take effect. Range: 0..9999.
                         apMaxMUTrigger 1.3.6.1.4.1.388.1.5.1.4.24 integer read-write
Indicates the trigger point for sending apMUMaxAssocTrap trap. Range (1..255). The default value is 255.
                         apMaxRetriesVoice 1.3.6.1.4.1.388.1.5.1.4.25 integer read-write
The maximum number of allowed retries before aborting a single transmission. Range (0..32). Default is 5.
                         apMcastMaskVoice 1.3.6.1.4.1.388.1.5.1.4.26 octet string read-write
This is used for Spectrum 24 telephone for intercomm function. The multicast mask is the top 32 bits of the MAC address and allows for a series of MAC addresses to receive multicast messages. These messages are transmitted by the AP immediately and not queued for processing at DTIM intervals..
                         apWEPAlgorithm 1.3.6.1.4.1.388.1.5.1.4.30 integer read-write
This attribute is a set of all the shared key WEP algorithms supported by the STAs. The following are the default values and the associated algorithm. Value = 1: 128 bit Key Value = 2: 40 bit Key. IMPORTANT NOTE: The 128 bit WEP key ENcryption is currently restricted by U.S. laws. In order to activate the 128 bit Encryption, an authentic License key has to be obtained and entered through one of the interfaces such as Telnet, SNMP or Web. Upon authentication of the key the AP will enable the 128 bit ENcryption. See Access Point manual for details. Enumeration: 'wep-40b-Key': 2, 'wep-128b-Key': 1.
                         apRFRate11Mb 1.3.6.1.4.1.388.1.5.1.4.31 integer read-write
Specifies the Current state of the RF data rate. There are three options: - optional(1) - not-used(2) - required(3) Default is optional for 11 Mb/s data rate. Enumeration: 'not-used': 2, 'optional': 1, 'required': 3.
                         apRFRate5_5Mb 1.3.6.1.4.1.388.1.5.1.4.32 integer read-write
Specifies the Current state of the RF data rate. There are three options: - optional(1) - not-used(2) - required(3) Default is optional for 5.5 Mb/S data rate. Enumeration: 'not-used': 2, 'optional': 1, 'required': 3.
                         apRFRate2Mb 1.3.6.1.4.1.388.1.5.1.4.33 integer read-write
Specifies the Current state of the RF data rate. There are three options: - optional(1) - not-used(2) - required(3) Default is optional for 2 Mb/s data rate. Enumeration: 'not-used': 2, 'optional': 1, 'required': 3.
                         apRFRate1Mb 1.3.6.1.4.1.388.1.5.1.4.34 integer read-write
Specifies the Current state of the RF data rate. There are three options: - optional(1) - not-used(2) - required(3) Default is required for 1 Mb/s data rate. Enumeration: 'not-used': 2, 'optional': 1, 'required': 3.
                         apRFPreamble 1.3.6.1.4.1.388.1.5.1.4.35 integer read-write
This attribute is set to disabled for compatibility within the 802.11 community. Setting it to enabled shall result in performance enhancement. Default is enabled. NOTE: Only radios with version 2 hardware support RF Preamble, hence configurable to enabled state. Enumeration: 'disabled': 2, 'enabled': 1.
                         apRadioType 1.3.6.1.4.1.388.1.5.1.4.36 integer read-only
This attribute displays the type of radio installed in the Access Point. ds11-v1 Ver.1 Hardware short RF Preamble not supported. ds11-V2 Ver.2 Hardware Short RF Preamble supported. Enumeration: 'ds11-V2': 1, 'ds11-v1': 2.
                     apSerialPortConfig 1.3.6.1.4.1.388.1.5.1.5
                         apPPPState 1.3.6.1.4.1.388.1.5.1.5.1 integer read-write
Indicates the current state of the PPP connection machine. Default is down(2). Enumeration: 'down': 2, 'up': 1.
                         apSerialPortUse 1.3.6.1.4.1.388.1.5.1.5.2 integer read-write
Specifies whether the Serial Interface is to be used as User Interface(UI) or PPP. Default is ui(2). Enumeration: 'ppp': 1, 'ui': 2.
                         apModemConnected 1.3.6.1.4.1.388.1.5.1.5.3 integer read-write
Specifies whether the Serial Interface has a modem attached to it. Default is no(2). Enumeration: 'yes': 1, 'no': 2.
                         apConnectMode 1.3.6.1.4.1.388.1.5.1.5.4 integer read-write
Specifies the Modem connection mode: - originate(1): AP sends dial-out information. - answer(2): AP waits for dial-in information. Default is answer(2). Enumeration: 'answer': 2, 'originate': 1.
                         apDialOutNumber 1.3.6.1.4.1.388.1.5.1.5.5 displaystring read-write
Specifies the number to be dialed by the modem.
                         apDialOutMode 1.3.6.1.4.1.388.1.5.1.5.6 integer read-write
Specifies the dialout mode: - auto(1): Modem dial out during startup time. - manual(2): Modem dial out by manned intervention Default is auto(1). Enumeration: 'auto': 1, 'manual': 2.
                         apAnswerWaitTime 1.3.6.1.4.1.388.1.5.1.5.7 integer read-write
Specifies the period (in seconds) the AP will wait for the remote unit to answer the call. Default is 60 seconds.
                         apModemSpeaker 1.3.6.1.4.1.388.1.5.1.5.8 integer read-write
Specifies if modem speaker is turned on(1) or off(2). Default is on(1). Enumeration: 'on': 1, 'off': 2.
                         apInactivityTimeout 1.3.6.1.4.1.388.1.5.1.5.9 integer read-write
Specifies the User Interface inactivity timeout in minutes. 0 means no timeout. Default is 5 minutes.
                         apPPPTimeout 1.3.6.1.4.1.388.1.5.1.5.10 integer read-write
Specifies the PPP event timeout in seconds. Default is 3 seconds.
                         apPPPTerminates 1.3.6.1.4.1.388.1.5.1.5.11 counter read-write
Specifies the maximum number of PPP terminate requests. Default is 10.
                     apAddrFilterTable 1.3.6.1.4.1.388.1.5.1.6 no-access
A table of MAC addresses not allowed to associate with the Access Point. The maximum number of entries in the table is 512.
                         apAddrFilterEntry 1.3.6.1.4.1.388.1.5.1.6.1 no-access
An entry in the table of Address Filter. A row in this table is created by setting the value of disallowedMU to the MAC address of the MU not allowed to associate with the Access Point. A row in this table is deleted by setting the value of disallowedMU to '000000000000'.
                             disallowedIndex 1.3.6.1.4.1.388.1.5.1.6.1.1 integer read-only
Address Filter Table index. Range (1..512).
                             disallowedMU 1.3.6.1.4.1.388.1.5.1.6.1.2 physaddress read-write
MU MAC address which is not allowed to be associated with this Access Point.
                     apTypeFilterTable 1.3.6.1.4.1.388.1.5.1.7 no-access
A table of Ethernet types (i.e. 16-bit DIX Ethernet type), which are entered by the user and supported for the type filtering function. The maximum number of entries in the table is 16.
                         apTypeFilterEntry 1.3.6.1.4.1.388.1.5.1.7.1 no-access
An entry in the table of Type Filter. A row in this table is created by setting the value of etherType to Ethernet packet type in hexadecimal. A row in this table is deleted by setting the value of etherType to 00
                             typeIndex 1.3.6.1.4.1.388.1.5.1.7.1.1 integer read-only
Filter Type Table index. Range (1..16).
                             etherType 1.3.6.1.4.1.388.1.5.1.7.1.2 octet string read-write
A 16-bit Ethernet Protocol Type in hexadecimal. Range of valid Entries: 0X05DD .. 0XFFFE
                     ap128bWEPKeyTable 1.3.6.1.4.1.388.1.5.1.8 no-access
A table of default WEP Keys The maximum number of entries in the table is 4.
                         apWEPKeyEntry 1.3.6.1.4.1.388.1.5.1.8.1 no-access
An entry in the table of Default WEP Keys.
                             ap128bWepkeyIndex 1.3.6.1.4.1.388.1.5.1.8.1.1 integer read-only
WEP Key Table index. Range (1..4).
                             ap128bWepKeyValue 1.3.6.1.4.1.388.1.5.1.8.1.2 wepkeytype128b read-write
A Default WEP Key Value. This value should be 26 character long. IMPORTANT NOTE: The 128 bit WEP key Encryption is currently restricted by U.S. laws. Its use is restricted to AP's manufactured for U.S. only. In order to activate the 128 bit Encryption for all other countries, an access code has to be obtained and entered through one of the interfaces such as Serial, Telnet, SNMP or Web. Upon authentication of the key the AP will enable the 128 bit Encryption. See Access Point manual for details.
                 apPerformMgmt 1.3.6.1.4.1.388.1.5.2
                     apTrafficMatrixTable 1.3.6.1.4.1.388.1.5.2.1 no-access
A table of Access Point Traffic Matrix which provides information on packets transmitted from one interface to another (Ethernet, PPP, radio, AP). The table also displays the number of broadcast packets transmitted from the Access Point. The current number of entries is 5.
                         apTrafficMatrixEntry 1.3.6.1.4.1.388.1.5.2.1.1 no-access
An entry in the table of Access Point Traffic Matrix. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
                             apTMTableIndex 1.3.6.1.4.1.388.1.5.2.1.1.1 integer read-only
Access Point Traffic Matrix Table index. Range (1..5).
                             apProtoItfName 1.3.6.1.4.1.388.1.5.2.1.1.2 displaystring read-only
Access Point Protocol Interface Name (i.e. Ethernet, PPP, Radio, AP).
                             apNPktsToEnets 1.3.6.1.4.1.388.1.5.2.1.1.3 counter read-only
Indicates the number of packets sent from the Access Point Protocol Interface to the Ethernet Interface. This field should always be zero if the Access Point Protocol Interface is Ethernet.
                             apNPktsToPpps 1.3.6.1.4.1.388.1.5.2.1.1.4 counter read-only
Indicates the number of packets sent from the Access Point Protocol Interface to the PPP Interface. This field is meaningful only if the PPP interface is enabled.
                             apNPktsToRfs 1.3.6.1.4.1.388.1.5.2.1.1.5 counter read-only
Indicates the number of packets sent from the Access Point Protocol Interface to the RF Interface. If the Access Point Protocol Interface is RF, these are frames from one MU to another.
                             apNPktsToAPStks 1.3.6.1.4.1.388.1.5.2.1.1.6 counter read-only
Indicates the number of packets sent from the Access Point Protocol Interface to the internal Access Point stack. This field should always be zero if the Access Point Protocol Interface is Access Point Stack.
                     apItfStatTable 1.3.6.1.4.1.388.1.5.2.2 no-access
A table of Access Point Interfaces Statistics, which provides packets forwarding statistics for each inter- face (Ethernet, PPP, RF, AP stack). Interface statistics also provide performance informa- tion for each interface in Packets-per-second (PPS) and Bytes- per-second (BPS). The AP interface indicates packets sent to the AP stack (e.g. configuration requests, SNMP, Telnet etc.). The current number of entries is 4.
                         apItfStatEntry 1.3.6.1.4.1.388.1.5.2.2.1 no-access
An entry in the table of Access Point Interface Statistics. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
                             apItfStatIndex 1.3.6.1.4.1.388.1.5.2.2.1.1 integer read-only
Access Point Interface Statistics Table index. Range (1..4).
                             apInterfaceName 1.3.6.1.4.1.388.1.5.2.2.1.2 displaystring read-only
Access Point Interface Name (Ethernet, PPP, RF, AP).
                             apPacketsIns 1.3.6.1.4.1.388.1.5.2.2.1.3 counter read-only
Indicates the number of good packets received on the specified interface.
                             apPacketsOuts 1.3.6.1.4.1.388.1.5.2.2.1.4 counter read-only
Indicates the number of packets successfully transmitted on the specified interface.
                             apOctetsIns 1.3.6.1.4.1.388.1.5.2.2.1.5 counter read-only
Indicates the number of good bytes received on the specified interface.
                             apOctetsOuts 1.3.6.1.4.1.388.1.5.2.2.1.6 counter read-only
Indicates the number of bytes successfully transmitted on the specified interface.
                             apPktsInPerSec 1.3.6.1.4.1.388.1.5.2.2.1.7 gauge read-only
Indicates the number of good packets per second received on the specified Interface.
                             apPktsOutPerSec 1.3.6.1.4.1.388.1.5.2.2.1.8 gauge read-only
Indicates the number of packets per second successfully transmitted on the specified interface.
                             apOctInPerSec 1.3.6.1.4.1.388.1.5.2.2.1.9 gauge read-only
Indicates the number of good bytes per second received on the specified Interface.
                             apOctOutPerSec 1.3.6.1.4.1.388.1.5.2.2.1.10 gauge read-only
Indicates the number of bytes per second successfully transmitted on the specified interface.
                     apEthernetStatistics 1.3.6.1.4.1.388.1.5.2.3
                         apEPktsSeens 1.3.6.1.4.1.388.1.5.2.3.1 counter read-only
Indicates the number of packets that have been seen on the Ethernet interface. Most of these packets are for stations other than those associated with this AP.
                         apEPktsForwardeds 1.3.6.1.4.1.388.1.5.2.3.2 counter read-only
Indicates the number of Ethernet packets forwarded from the Ethernet interface to other interfaces.
                         apEPktsDiscNoMatchs 1.3.6.1.4.1.388.1.5.2.3.3 counter read-only
Indicates the number of packets discarded due to unknown destination (i.e. no database entry).
                         apEPktsDiscForceds 1.3.6.1.4.1.388.1.5.2.3.4 counter read-only
Indicates the number of packets discarded due to Type or Address filters applied.
                         apEPktsDiscBuffers 1.3.6.1.4.1.388.1.5.2.3.5 counter read-only
Indicates the number of packets discarded due to lack of available buffers in AP.
                         apEPktsDiscCRCs 1.3.6.1.4.1.388.1.5.2.3.6 counter read-only
Indicates the number of packets discarded due to CRC errors.
                         apEPktsSents 1.3.6.1.4.1.388.1.5.2.3.7 counter read-only
Indicates the number of packets sent by this Ethernet Port.
                         apEAnyCollisions 1.3.6.1.4.1.388.1.5.2.3.8 counter read-only
Indicates the number of packets that suffer at least one collision.
                         apE1orMoreColls 1.3.6.1.4.1.388.1.5.2.3.9 counter read-only
Indicates the number of packets that suffer more than one collision.
                         apEMaxCollisions 1.3.6.1.4.1.388.1.5.2.3.10 counter read-only
Indicates the number of packets that suffer more than the maximum number of collisions.
                         apELateCollisions 1.3.6.1.4.1.388.1.5.2.3.11 counter read-only
Indicates the number of packets that suffer late collisions.
                         apEPktsDefers 1.3.6.1.4.1.388.1.5.2.3.12 counter read-only
Indicates the times AP had to defer transmit requests on Ethernet due to busy medium.
                         apEBcMcPkts 1.3.6.1.4.1.388.1.5.2.3.13 counter read-only
Indicates the number of broadcast/multicast packets that have been transmitted.
                         apEIndividualAddrs 1.3.6.1.4.1.388.1.5.2.3.14 counter read-only
Indicates the number of individual address (unicast) packets that have been received.
                     apRFStatistics 1.3.6.1.4.1.388.1.5.2.4
                         rfBcMcPktsSents 1.3.6.1.4.1.388.1.5.2.4.1 counter read-only
Indicates the number of broadcast/multicast packets that have been successfully transmitted.
                         rfBcMcPktsRcvds 1.3.6.1.4.1.388.1.5.2.4.2 counter read-only
Indicates the number of broadcast/multicast packets that have been successfully received.
                         rfBcMcOctSents 1.3.6.1.4.1.388.1.5.2.4.3 counter read-only
Indicates the number of broadcast/multicast bytes that have been successfully transmitted.
                         rfBcMcOctRcvds 1.3.6.1.4.1.388.1.5.2.4.4 counter read-only
Indicates the number of broadcast/multicast bytes that have been successfully received.
                         rfSysPktsSents 1.3.6.1.4.1.388.1.5.2.4.5 counter read-only
Indicates the number of system packets (includes probe operations packets) that have been successfully transmitted.
                         rfSysPktsRcvds 1.3.6.1.4.1.388.1.5.2.4.6 counter read-only
Indicates the number of system packets (includes probes /associate packets) that have been successfully received.
                         rfSBcMcPktsSents 1.3.6.1.4.1.388.1.5.2.4.7 counter read-only
Indicates the number of system broadcast/multicast packets (includes beacons) that have been successfully transmitted.
                         rfSBcMcPktsRcvds 1.3.6.1.4.1.388.1.5.2.4.8 counter read-only
Indicates the number of system broadcast/multicast (includes beacons) packets that have been successfully received.
                         rfSuccFragPkts 1.3.6.1.4.1.388.1.5.2.4.9 counter read-only
Indicates the number of packets that were fragmented and for which all fragments were acked.
                         rfUnsuccFragPkts 1.3.6.1.4.1.388.1.5.2.4.10 counter read-only
Indicates the number of packets that were fragmented but for which one or more fragments were not acked.
                         rfTotalFragSents 1.3.6.1.4.1.388.1.5.2.4.11 counter read-only
Indicates the number of packets fragments that have been sent.
                         rfTotalFragRcvds 1.3.6.1.4.1.388.1.5.2.4.12 counter read-only
Indicates the number of packets fragments that have been received.
                         rfSuccReassPkts 1.3.6.1.4.1.388.1.5.2.4.13 counter read-only
Indicates the number of packets that were reassigned and successfully reassembled.
                         rfUnsuccReassPkts 1.3.6.1.4.1.388.1.5.2.4.14 counter read-only
Indicates the number of packets that were unsuccessfully reassembled.
                         rfAssocMUs 1.3.6.1.4.1.388.1.5.2.4.15 counter read-only
Indicates the number of MUs currently associated with this AP.
                         rfRcvdCRCErrors 1.3.6.1.4.1.388.1.5.2.4.16 counter read-only
Indicates the number of packets that were received but had the CRC errors.
                         rfRcvdDupPkts 1.3.6.1.4.1.388.1.5.2.4.17 counter read-only
Indicates the number of packets that were received but were duplicates of previously received. This is usually an indication that an ACK was not received by the sending unit.
                         rfTotalCollisions 1.3.6.1.4.1.388.1.5.2.4.18 counter read-only
Indicates the number of collisions that have occured on the interface. A collision on the RF interface means that an ack was not received or that a RTS was not answered by a CTS.
                         rfPktsWithoutColls 1.3.6.1.4.1.388.1.5.2.4.19 counter read-only
Indicates the number of packets without any collision.
                         rfPktsWithMaxColls 1.3.6.1.4.1.388.1.5.2.4.20 counter read-only
Indicates the number of packets that suffered the maximum number of collisions.
                         rfPktsWithColls 1.3.6.1.4.1.388.1.5.2.4.21 counter read-only
Indicates the number of packets that suffered at least one collision.
                         rfDataPktsSents 1.3.6.1.4.1.388.1.5.2.4.22 counter read-only
Indicates the number of packets transmitted.
                         rfDataPktsRcvds 1.3.6.1.4.1.388.1.5.2.4.23 counter read-only
Indicates the number of packets that were successfully received.
                         rfDataOctetsSents 1.3.6.1.4.1.388.1.5.2.4.24 counter read-only
Indicates the number of octets transmitted.
                         rfDataOctetsRcvds 1.3.6.1.4.1.388.1.5.2.4.25 counter read-only
Indicates the number of octets that were successfully received.
                         rfEncrypPktsSents 1.3.6.1.4.1.388.1.5.2.4.26 counter read-only
Indicates the number of Encrypted packets transmitted.
                         rfEncrypPktsRcvds 1.3.6.1.4.1.388.1.5.2.4.27 counter read-only
Indicates the number of Encrypted packets that were successfully received.
                     apSerialPortStatistics 1.3.6.1.4.1.388.1.5.2.6
                         apNbrOfDialouts 1.3.6.1.4.1.388.1.5.2.6.1 counter read-only
Indicates the number of dialout attempts by the AP.
                         apDialoutFailures 1.3.6.1.4.1.388.1.5.2.6.2 counter read-only
Indicates the number of dialout failures by the AP.
                         apNbrOfAnswers 1.3.6.1.4.1.388.1.5.2.6.3 counter read-only
Indicates the number of answer attempts by the AP.
                         apCurrCallTime 1.3.6.1.4.1.388.1.5.2.6.4 timeticks read-only
Indicates the length in seconds of current connection session. Note: the time is relative to the boot time of this AP.
                         apLastCallTime 1.3.6.1.4.1.388.1.5.2.6.5 timeticks read-only
Indicates the length in seconds of last connection session. Note: the time is relative to the boot time of this AP.
                     apWNMPStatistics 1.3.6.1.4.1.388.1.5.2.7
                         apWNMPCfgPkts 1.3.6.1.4.1.388.1.5.2.7.1 counter read-only
Indicates the number of WNMP configuration requests received from NetVision.
                         wEchoRequests 1.3.6.1.4.1.388.1.5.2.7.2 counter read-only
Indicates the number of WNMP Echo Requests received by this AP.
                         wPingRequests 1.3.6.1.4.1.388.1.5.2.7.3 counter read-only
Indicates the number of WNMP ping requests received by this AP.
                         wPktsFromNVs 1.3.6.1.4.1.388.1.5.2.7.4 counter read-only
Indicates the number of WNMP packets that were received from NetVision via this AP.
                         wPPktsToNVs 1.3.6.1.4.1.388.1.5.2.7.5 counter read-only
Indicates the number of WNMP packets that were sent to the NetVision via this AP.
                         wPassThruEchoes 1.3.6.1.4.1.388.1.5.2.7.6 counter read-only
Indicates the number of WNMP packets for other stations that passed through this AP.
                     apMUInfo 1.3.6.1.4.1.388.1.5.2.8
                         apCurrentMUs 1.3.6.1.4.1.388.1.5.2.8.1 counter read-only
Indicates the number of MUs currently associated with this AP.
                         apMaxMUs 1.3.6.1.4.1.388.1.5.2.8.2 counter read-only
Indicates the highest number of MUs ever associated with this AP.
                         apTotalAssocs 1.3.6.1.4.1.388.1.5.2.8.3 counter read-only
Indicates the total number of associations by all MUs with this AP.
                         apMUTable 1.3.6.1.4.1.388.1.5.2.8.4 no-access
A table of information for a specific MU associated with this Access Point. The current number of entries is 127.
                             apMUEntry 1.3.6.1.4.1.388.1.5.2.8.4.1 no-access
An entry in the table of information for a specific MU associated with this Access Point. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
                                 muIndex 1.3.6.1.4.1.388.1.5.2.8.4.1.1 integer read-only
Specific MU information Table index. Range (1..127).
                                 muMacAddr 1.3.6.1.4.1.388.1.5.2.8.4.1.2 physaddress read-only
The MAC address of the MU associated with this AP.
                                 muInterface 1.3.6.1.4.1.388.1.5.2.8.4.1.3 integer read-only
Indicates the interface on which this MU is located. Note: The AP may learn of an MU via the RF network or from the wired networks such as Ethernet or PPP. In this release, the AP does not keep track of those MUs reachable via the Ethernet, but that will change in future releases. Enumeration: 'ethernet': 1, 'rf': 3, 'ppp': 2, 'apstack': 4.
                                 muState 1.3.6.1.4.1.388.1.5.2.8.4.1.4 integer read-only
Indicates the state of this MU. Enumeration: 'not-associated': 4, 'associated': 3.
                                 muPowerMode 1.3.6.1.4.1.388.1.5.2.8.4.1.5 integer read-only
Indicates the MU power mode (Power Save Protocol mode or Continue Active Mode.) Enumeration: 'psp': 2, 'cam': 1.
                                 muStationID 1.3.6.1.4.1.388.1.5.2.8.4.1.6 integer read-only
Indicates the MU station ID.
                                 muLastAPAddr 1.3.6.1.4.1.388.1.5.2.8.4.1.7 physaddress read-only
Indicates the MAC address of the last AP with which this MU had an association.
                                 muTotalAssoc 1.3.6.1.4.1.388.1.5.2.8.4.1.8 integer read-only
Indicates the total associations for this MU.
                                 muAssocStart 1.3.6.1.4.1.388.1.5.2.8.4.1.9 timeticks read-only
Indicates when the MU began its current association with this AP. Note: Time is represented in seconds and the time is relative to the boot time of this AP. This is also true for all the association objects listed below.
                                 muLstAssStrt 1.3.6.1.4.1.388.1.5.2.8.4.1.10 timeticks read-only
Indicates when the MU began its prior association with this AP. If this is the first association with this AP, this value is zero.
                                 muLastAssEnd 1.3.6.1.4.1.388.1.5.2.8.4.1.11 timeticks read-only
Indicates when the MU ended its previous association with this AP. If this is the first association with this AP, this value is zero.
                                 muNPktsSents 1.3.6.1.4.1.388.1.5.2.8.4.1.12 counter read-only
Indicates the number of packets successfully transmitted to this MU.
                                 muNPktsRcvds 1.3.6.1.4.1.388.1.5.2.8.4.1.13 counter read-only
Indicates the number of Good Packets received from this MU.
                                 muNBytesSents 1.3.6.1.4.1.388.1.5.2.8.4.1.14 counter read-only
Indicates the number of bytes successfully transmitted to this MU.
                                 muNBytesRcvds 1.3.6.1.4.1.388.1.5.2.8.4.1.15 counter read-only
Indicates the number of Good Bytes received from this MU.
                                 muNDiscdPkts 1.3.6.1.4.1.388.1.5.2.8.4.1.16 counter read-only
Indicates the number of received packets discarded because no buffers.
                                 muTmLastData 1.3.6.1.4.1.388.1.5.2.8.4.1.17 timeticks read-only
Indicates the time when the last good packet was received from this MU. The packet may be either an ACK, Data, or Poll.
                                 muPriority 1.3.6.1.4.1.388.1.5.2.8.4.1.18 integer read-only
Indicates the Voice/Data priority mode for this MU. Enumeration: 'voice': 1, 'normal': 2.
                                 muSupportedRates 1.3.6.1.4.1.388.1.5.2.8.4.1.19 integer read-only
Indicates the supported data rates for this MU. The unit is MB/second. Enumeration: 'one-and-five-half-and-eleven-Mb': 13, 'two-and-eleven-Mb': 10, 'one-and-two-and-five-half-Mb': 7, 'one-Mb': 1, 'five-half-Mb': 4, 'one-and-five-half-Mb': 5, 'two-and-five-half-Mb': 6, 'one-and-two-and-eleven-Mb': 11, 'two-Mb': 2, 'five-half-and-eleven-Mb': 12, 'one-and-two-Mb': 3, 'eleven-Mb': 8, 'one-and-eleven-Mb': 9, 'one-and-two-and-five-half-and-eleven-Mb': 15, 'two-and-five-half-and-eleven-Mb': 14.
                                 muCurrentXmtRate 1.3.6.1.4.1.388.1.5.2.8.4.1.20 integer read-only
Indicates the current transmit data rate for this MU. The unit is MB/second. Enumeration: 'two-Megabit': 2, 'one-Megabit': 1, 'eleven-Megabit': 4, 'five-half-Megabit': 3.
                                 muLastActivity 1.3.6.1.4.1.388.1.5.2.8.4.1.21 timeticks read-only
Indicates the time for the last activity for this MU.
                         apMUHmAgTable 1.3.6.1.4.1.388.1.5.2.8.5 no-access
A table of information on Mobile IP Home agent. The current number of entries is 127.
                             apMUHATEntry 1.3.6.1.4.1.388.1.5.2.8.5.1 no-access
An entry in the table of information on on Mobile IP Home agent. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
                                 muHATMUIpAddr 1.3.6.1.4.1.388.1.5.2.8.5.1.1 ipaddress read-only
This is the IP Address of the MU visiting in the foreign network.
                                 muHATFrAgIpAddr 1.3.6.1.4.1.388.1.5.2.8.5.1.2 ipaddress read-only
This is the IP Address of the Foreign agent for the visiting MU.
                         apMUFrAgTable 1.3.6.1.4.1.388.1.5.2.8.6 no-access
A table of information on Mobile IP Foreign agent. The current number of entries is 127.
                             apMUFATEntry 1.3.6.1.4.1.388.1.5.2.8.6.1 no-access
An entry in the table of information on Mobile IP Foreign agent. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
                                 muFATMUIpAddr 1.3.6.1.4.1.388.1.5.2.8.6.1.1 ipaddress read-only
This is the IP Address of the MU visiting in the foreign network.
                                 muFATHmAgIpAddr 1.3.6.1.4.1.388.1.5.2.8.6.1.2 ipaddress read-only
This is the IP Address of the home agent for the visiting MU.
                     apKnownAPsTable 1.3.6.1.4.1.388.1.5.2.9 no-access
A table of information on other Access Points known by this Access Point. The current number of entries is 32.
                         apKnownAPsEntry 1.3.6.1.4.1.388.1.5.2.9.1 no-access
An entry in the table of information on the Known Access Points. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
                             apAPMacAddr 1.3.6.1.4.1.388.1.5.2.9.1.1 physaddress read-only
Mac Address of this Known AP.
                             apAPIpAddr 1.3.6.1.4.1.388.1.5.2.9.1.2 ipaddress read-only
IP Address of this Known AP.
                             apHoppingSet 1.3.6.1.4.1.388.1.5.2.9.1.3 integer read-only
Hopping Set of this Known AP.
                             apHoppingSeq 1.3.6.1.4.1.388.1.5.2.9.1.4 integer read-only
Hopping Sequence of this Known AP.
                             apNbrOfMUs 1.3.6.1.4.1.388.1.5.2.9.1.5 integer read-only
Indicates the number of MUs currently associated with this known AP.
                             apKBIOS 1.3.6.1.4.1.388.1.5.2.9.1.6 integer read-only
Kilobytes sent and received per second by this known AP on the radio interface.
                             apAway 1.3.6.1.4.1.388.1.5.2.9.1.7 integer read-only
Indicate that whether this known AP is still alive or not. If the current AP does not receive WNMP packet from this known AP within 36 seconds, this known AP is considered 'AWAY'. Enumeration: 'yes': 1, 'no': 2.
                             ap802dot11Protocol 1.3.6.1.4.1.388.1.5.2.9.1.8 integer read-only
Indicate that whether this known AP is 802.11 compliant. Enumeration: 'yes': 1, 'no': 2.
                             apFwVer 1.3.6.1.4.1.388.1.5.2.9.1.9 displaystring read-only
Indicates The firmware revision for this known Access Point.
                             apDSchannel 1.3.6.1.4.1.388.1.5.2.9.1.10 integer read-only
The current operating frequency channel of the DSSS PHY. Valid channel numbers are as defined in IEEE 802.11 specification section 15.4.6.2.
                     apFilterStatistics 1.3.6.1.4.1.388.1.5.2.10
                           apAdrViolations 1.3.6.1.4.1.388.1.5.2.10.1 counter read-only
Indicates the number of Mobile Unit MAC address violations counted.
                           apTypeViolations 1.3.6.1.4.1.388.1.5.2.10.2 counter read-only
Indicates the number of Ethernet packet type violations counted.
                     apWLAPInfo 1.3.6.1.4.1.388.1.5.2.11
                           apNbrOfWLAPItfs 1.3.6.1.4.1.388.1.5.2.11.1 counter read-only
Indicates number of WLAP interfaces established.
                           apWLAPState 1.3.6.1.4.1.388.1.5.2.11.2 integer read-only
Indicates the current WLAP state. The state values and meanings are as follows: - During power-up initialization: Initializing(1) - During WLAP association process: send-probe(2) send-assoc-req(3) send-cfg-bpdu(4) wait-for-probe(5) send-probe-rsp(6) send-assoc-rsp(7) send-cfg-rsp(8) receive-root-rsp(10) - During WLAP operation: root-ap-lost(12) disabled(14) functional(15) wlap-lost-on-ethernet(16) Enumeration: 'send-probe-rsp': 6, 'send-cfg-rsp': 8, 'wlap-lost-on-ethernet': 16, 'root-ap-lost': 12, 'send-assoc-req': 3, 'receive-root-rsp': 10, 'functional': 15, 'disabled': 14, 'send-assoc-rsp': 7, 'send-probe': 2, 'initializing': 1, 'send-cfg-bpd': 4, 'wait-for-probe': 5.
                           apWLAPHopSequence 1.3.6.1.4.1.388.1.5.2.11.3 integer read-only
Indicates the hop sequence of the Root AP followed by this WLAP.
                           apRootInterface 1.3.6.1.4.1.388.1.5.2.11.4 integer read-only
Indicates the WLAP interface leading to the Root AP.
                           apRootWLAPID 1.3.6.1.4.1.388.1.5.2.11.5 octet string read-only
Indicates the WLAP ID of the Root AP. It consists of 2 bytes of priority (Default is 0x8000) and 6 bytes of MAC address of the Root AP
                           apRootPathCost 1.3.6.1.4.1.388.1.5.2.11.6 integer read-only
Indicates how many hops away the current WLAP is from the Root AP.
                           apWLAPID 1.3.6.1.4.1.388.1.5.2.11.7 octet string read-only
Indicates the WLAP ID of the current WLAP. It consists of 2 bytes of priority (Default is 0x8000) and 6 bytes MAC address of the current WLAP
                           apWLAPItfTable 1.3.6.1.4.1.388.1.5.2.11.8 no-access
A table of wireless AP interfaces information, which contains four (4) AP-to-AP interfaces.
                               apWLAPItfEntry 1.3.6.1.4.1.388.1.5.2.11.8.1 no-access
An entry in the table of wireless AP interfaces information.
                                   apWLAPItfID 1.3.6.1.4.1.388.1.5.2.11.8.1.1 octet string read-only
WLAP interface ID. It consists of 1 byte of priority (Default is 0x80) and 1 byte of interface ID.
                                   apWLAPItfAddr 1.3.6.1.4.1.388.1.5.2.11.8.1.2 physaddress read-only
The MAC address of the associated WLAP on this interface.
                                   apWLAPItfState 1.3.6.1.4.1.388.1.5.2.11.8.1.3 integer read-only
The current state of the Wireless AP interface, ie : Disabled(1), Listening(2), Learning(3), Forwarding(4), or Blocking(5). Enumeration: 'disabled': 1, 'forwarding': 4, 'learning': 3, 'listening': 2, 'blocking': 5.
                                   apWLAPPathCost 1.3.6.1.4.1.388.1.5.2.11.8.1.4 integer read-only
The cost to be added to the root path cost field in the config BPDU (Bridge Protocol Data Unit) received on this interface in order to determine the cost of the path to the root WLAP.
                                   apDsgnatedRoot 1.3.6.1.4.1.388.1.5.2.11.8.1.5 octet string read-only
The unique Root AP ID designated by the Root AP.
                                   apDsgnatedCost 1.3.6.1.4.1.388.1.5.2.11.8.1.6 integer read-only
The cost of the path to the Root AP designated by the Root AP.
                                   apDsgnatedWLAP 1.3.6.1.4.1.388.1.5.2.11.8.1.7 octet string read-only
The unique WLAP ID designated by the Root AP.
                                   apDsgnatedItf 1.3.6.1.4.1.388.1.5.2.11.8.1.8 octet string read-only
The WLAP interface ID designated by the Root AP.
                     apRetryHistogramTable 1.3.6.1.4.1.388.1.5.2.12 no-access
A table of Retry statistics, which is based on number of packets with various retries over time. The current number of entries is 16.
                           apRetryHistogramEntry 1.3.6.1.4.1.388.1.5.2.12.1 no-access
An entry in the table of Retry Histogram, which is based on number of packets with various retries over time. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
                               apRetryHistogramIndex 1.3.6.1.4.1.388.1.5.2.12.1.1 integer read-only
Number of retries index. Range (1..16).
                               apNumberOfRetries 1.3.6.1.4.1.388.1.5.2.12.1.2 integer read-only
Packets with this Number of retries. Range (0..15).
                               apPacketsHistogramCounts 1.3.6.1.4.1.388.1.5.2.12.1.3 counter read-only
Counter for the packets per number of retries.
                     apDSPerFreqStatTable 1.3.6.1.4.1.388.1.5.2.13 no-access
A table of Radio Per Frequency statistics, which is based on the historical frequency records used by this Access Point. The current number of entries is 78.
                           apDSPerFreqStatEntry 1.3.6.1.4.1.388.1.5.2.13.1 no-access
An entry in the table of Radio per frequency statistics. A row in this table cannot be created or deleted by SNMP operations on columns of the table.
                               rfDSFrequency 1.3.6.1.4.1.388.1.5.2.13.1.1 integer read-only
Radio Frequency channel number.
                               rfDSPerFqPktsSents 1.3.6.1.4.1.388.1.5.2.13.1.2 counter read-only
Counter for the packets sent per frequency.
                               rfDSPerFqPktsRcvds 1.3.6.1.4.1.388.1.5.2.13.1.3 counter read-only
Counter for the packets received per frequency.
                               rfDSPerFqRetries 1.3.6.1.4.1.388.1.5.2.13.1.4 counter read-only
Counter for the retries per frequency.
                     apMobileIPStatistics 1.3.6.1.4.1.388.1.5.2.14
                           apAgentAdSents 1.3.6.1.4.1.388.1.5.2.14.1 counter read-only
Counter for the number agent advertisement sent.
                           apRegRequestRcvds 1.3.6.1.4.1.388.1.5.2.14.2 counter read-only
Counter for the number registration request received.
                           apRegReplySents 1.3.6.1.4.1.388.1.5.2.14.3 counter read-only
Counter for the number registration reply sent.
                 apFaultMgmt 1.3.6.1.4.1.388.1.5.3
                     apClrAllStatistics 1.3.6.1.4.1.388.1.5.3.1 integer read-write
Clear all the interface statistics (yes = 1, no = 2). Enumeration: 'yes': 1, 'no': 2.
                     apClrMUTable 1.3.6.1.4.1.388.1.5.3.2 integer read-write
Clear the MU Table (yes = 1, no = 2). Enumeration: 'yes': 1, 'no': 2.
                     apClrACL 1.3.6.1.4.1.388.1.5.3.3 integer read-write
Clear the Access Control Table (yes = 1, no = 2). Enumeration: 'yes': 1, 'no': 2.
                     apClrACLRangeTable 1.3.6.1.4.1.388.1.5.3.4 integer read-write
Clear the Access Control Range Table (yes = 1, no = 2). Enumeration: 'yes': 1, 'no': 2.
                     apClrAddrFilterTbl 1.3.6.1.4.1.388.1.5.3.5 integer read-write
Clear the Address Filtering Table (yes = 1, no = 2). Enumeration: 'yes': 1, 'no': 2.
                     apLdACLFrMUList 1.3.6.1.4.1.388.1.5.3.6 integer read-write
Load the Access Control Table from MU Table (yes = 1, no = 2). Enumeration: 'yes': 1, 'no': 2.
                     apModemDialOut 1.3.6.1.4.1.388.1.5.3.7 integer read-write
Commands the modem to dialout (yes = 1, no = 2). Enumeration: 'yes': 1, 'no': 2.
                     apModemHangUp 1.3.6.1.4.1.388.1.5.3.8 integer read-write
Forces the AP to issue a 'hangup' string to the modem attached to the serial port (yes = 1, no = 2). This command is meaning-ful only if the AP is configured for a modem connection on the serial port. If there is no modem or there is no connection, the command will be ignored. Enumeration: 'yes': 1, 'no': 2.
                     apUpdateFirmware 1.3.6.1.4.1.388.1.5.3.9 integer read-write
Update the AP firmware through TFTP server. The AP firmware will be saved in NVRAM (yes = 1, no = 2). Before issuing this command, set 'apDnLdFileName', and 'apTFTPServer' to the proper values. Enumeration: 'yes': 1, 'no': 2.
                     apDnLdFileName 1.3.6.1.4.1.388.1.5.3.10 displaystring read-write
The name of the file to be downloaded to the AP. (Including path name and total up to 49 characters.) Note: IF DHCP is responded to, that name will take precedence and overwrite this name.
                     apTFTPServer 1.3.6.1.4.1.388.1.5.3.11 ipaddress read-write
The IP address for the TFTP Server. Note: IF DHCP is responded to, that IP address will take precedence and overwrite this setting.
                     apResetAP 1.3.6.1.4.1.388.1.5.3.12 integer read-write
Forces a reset of the AP (yes = 1, no = 2). Upon reset, the AP clears all the statistics and restores the last saved configuration information. If changes are made without being saved, the AP clears those changes upon reset. Enumeration: 'yes': 1, 'no': 2.
                     apHTMLFileName 1.3.6.1.4.1.388.1.5.3.13 displaystring read-write
The name of the HTML file to be downloaded to the AP. (Including path name and total up to 49 characters.) Note: IF DHCP is responded to, that name will take precedence and overwrite this name.
                     apUpdateHTMLFile 1.3.6.1.4.1.388.1.5.3.14 integer read-write
Update the AP HTML file through TFTP server. The AP HTML file will be saved in NVRAM (yes = 1, no = 2). Before issuing this command, set 'apHTMLFileName', and 'apTFTPServer' to the proper values. Enumeration: 'yes': 1, 'no': 2.
                     apDHCPEnable 1.3.6.1.4.1.388.1.5.3.15 integer read-write
Enables/Disables DHCP mode for the AP. Default is disabled(2). Enumeration: 'disabled': 2, 'enabled': 1.
                     apUpdAllAPsFirmware 1.3.6.1.4.1.388.1.5.3.16 integer read-write
Update all APs firmware on this network which share the same NetID through TFTP server. The AP firmware will be saved in NVRAM (yes = 1, no = 2). Before issuing this command, set 'apDnLdFileName', and 'apTFTPServer' to the proper values. Enumeration: 'yes': 1, 'no': 2.
                     apUpdAllAPsHTMLFile 1.3.6.1.4.1.388.1.5.3.17 integer read-write
Update all APs HTML file on this network which share the same NetID through TFTP server. The AP HTML file will be saved in NVRAM (yes = 1, no = 2). Before issuing this command, set 'apHTMLFileName', and 'apTFTPServer' to the proper values. Enumeration: 'yes': 1, 'no': 2.
                     apTFTPUpdBothFiles 1.3.6.1.4.1.388.1.5.3.18 integer read-write
Update Both HTML file and Firmware for this Access Point The AP HTML file will be saved in NVRAM (yes = 1, no = 2). Before issuing this command, set 'apHTMLFileName', and 'apTFTPServer' to the proper values. Enumeration: 'yes': 1, 'no': 2.
                     apHelpURL 1.3.6.1.4.1.388.1.5.3.19 displaystring read-write
The name of the HTML Help file . (Including path name and total up to 39 characters.)
                     apFileUpdateStatus 1.3.6.1.4.1.388.1.5.3.20 integer read-only
Reports the Firmware/HTML file download and update status. Enumeration: 'xmodem-transfer-cancelled': 3, 'firmware-file-not-found': 8, 'no-ARP-response-from-server': 6, 'tftp-server-unreachable': 5, 'corrupted-firmware-file': 15, 'too-many-TFTP-retries': 14, 'unable-to-open-HTML-file': 12, 'bad-permissions-for-firmware-file': 10, 'too-many-XMODEM-errors': 2, 'no-TFTP-service-on-server': 7, 'html-file-not-found': 9, 'unable-to-open-firmware-file': 11, 'xmodem-packets-out-of-order': 4, 'general-download-failure': 16, 'error-during-TFTP-download': 13, 'download-successful': 1.
                     apFlashLEDs 1.3.6.1.4.1.388.1.5.3.21 integer read-write
When this command is issued, it forces all status LEDs on the AP to start flashing. This command is primarily used for physically locating the AP where multiple APs are deployed. (yes = 1, no = 2) Default is no. Enumeration: 'yes': 1, 'no': 2.
                 apSecurityMgmt 1.3.6.1.4.1.388.1.5.4
                     apACLViolations 1.3.6.1.4.1.388.1.5.4.1 counter read-only
Indicates the number of Access Control violations occurred.
                     apSaveConfig 1.3.6.1.4.1.388.1.5.4.2 integer read-write
Saves the current configuration to NVRAM (yes = 1, no = 2). Enumeration: 'yes': 1, 'no': 2.
                     apAccCtrlTable 1.3.6.1.4.1.388.1.5.4.3 no-access
A table of MAC addresses allowed to associate with the Access Point. The maximum number of entries in the table is 512.
                         apAccCtrlEntry 1.3.6.1.4.1.388.1.5.4.3.1 no-access
An entry in the table of MAC address Access Control. A row in this table is created by setting the value of allowedMU to the MAC address of the MU allowed to associate with this Access Point. A row in this table is deleted by setting the value of allowedMU to '000000000000'.
                             allowedIndex 1.3.6.1.4.1.388.1.5.4.3.1.1 integer read-only
Access Control Table index. Range (1..512).
                             allowedMU 1.3.6.1.4.1.388.1.5.4.3.1.2 physaddress read-write
MU MAC address which is allowed to associate with this AP.
                     apACLRangeTable 1.3.6.1.4.1.388.1.5.4.4 no-access
A table of Access Control Range, which consists of eight (8) pairs of low and high MAC addresses. Any Mobile Unit with the MAC address within the range is allowed to associate with the Access Point. The maximum number of entries in the table is 8.
                         apACLRangeEntry 1.3.6.1.4.1.388.1.5.4.4.1 no-access
An entry in the table of MAC address Access Control Range. A row in this table is created by first setting the value of lowMacAddr to the lowest MAC address and then the value of highMacAddr to the highest MAC address of a group of Mobile Units allowed to associate with this Access Point. This sequence of setting is very important, otherwise a wrong result will occur. A row in this table is deleted by setting the value of either lowMacAddr or highMacAddr to '000000000000'.
                             apACLRangeIndex 1.3.6.1.4.1.388.1.5.4.4.1.1 integer read-only
Access Control Range Table index. Range (1..8).
                             lowMacAddr 1.3.6.1.4.1.388.1.5.4.4.1.2 physaddress read-write
The lowest Mobile Unit MAC address in the range which is allowed to be associated with this AP. Note: When setting the ACL range, Both lowMacAddr and highMacAddr have to be set in order for the ACL range setting to take effect. lowMacAddr should be entered first. lowMacAddr < highMacAddr
                             highMacAddr 1.3.6.1.4.1.388.1.5.4.4.1.3 physaddress read-write
The highest Mobile Unit MAC address in the range which is allowed to be associated with this AP. Note: When setting the ACL range, Both lowMacAddr and highMacAddr have to be set in order for the ACL range setting to take effect. highMacAddr should be entered last. highMacAddr > lowMacAddr
                     apSaveConfigAllAPs 1.3.6.1.4.1.388.1.5.4.5 integer read-write
Saves the current configuration to NVRAM for all APs on this network which share the same NetID(yes = 1, no = 2). Enumeration: 'yes': 1, 'no': 2.
                     apWEPLicenseKey 1.3.6.1.4.1.388.1.5.4.6 displaystring read-write
This is a license key (a string of 18 alphanumeric characters). It is arranaged as follows: xxxx-yyyyyyy-zzzzzzz xxxx : vendor specific ID code ( 4 alphabetical characters) -yyyyyyy-zzzzzzz : a string of 14 alphanumeric characters Note: It is important to insert the hyphens in as shown. When entered and authenticated by the AP, the Strong(128 bit) encryption is enabled. Check the state of ap128bWEPFlag object.
                     ap128bWEPFlag 1.3.6.1.4.1.388.1.5.4.7 integer read-only
When enabled, This flag indicates that AP is enabled to supports strong(128 bit) Encryption. The state of this flag is internally set only by the AP. when a valid access code is entered for apWEPLicenseKey object and accepted the AP will set the state of this flag to enabled. Default is disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                   apDSAPRFStartUpTrap 1.3.6.1.4.1.388.1.50.101
RF Driver is up. - apMyMacAddr is the MAC address of the Access Point sending this trap message.
                   apDSAPACLViolationTrap 1.3.6.1.4.1.388.1.50.102
Mobile Unit MAC address not in the Access control Table. - apMyMacAddr is the MAC address of the Access Point sending this trap message. - muMacAddr is the MAC address of the Mobile Unit not in the Access Control Table.
                   apDSAPMUAssocTrap 1.3.6.1.4.1.388.1.50.111
Indicates that there is one Mobile Unit associating with this Access Point. - apMyMacAddr is the MAC address of the Access Point sending this trap message. - muMacAddr is the MAC address of the Mobile Unit. Note : If two or more Mobile Units associate with the Access Point at the same time, muMacAddr belongs to the last Mobile Unit. - apCurrentMUs is the number of Mobile Units currently associating with this Access Point.
                   apDSAPMUUnAssocTrap 1.3.6.1.4.1.388.1.50.112
Indicates that there is one Mobile Unit no longer associating with this Access Point anymore. - apMyMacAddr is the MAC address of the Access Point sending this trap message. - muMacAddr is the MAC address of the Mobile Unit. Note : If two or more Mobile Units un-associate with the Access Point at the same time, muMacAddr belongs to the last Mobile Unit. - apCurrentMUs is the number of Mobile Units currently associating with this Access Point.
                   apDSAPMUMaxAssocTrap 1.3.6.1.4.1.388.1.50.116
Indicates that the number of MUs associated with this Access Point is at the threshold set by apMaxMUTrigger. - apMyMacAddr is the MAC address of the Access Point sending this trap message. - apCurrentMUs is the number of Mobile Units currently associating with this Access Point.
                   apDSRootWLAPUpTrap 1.3.6.1.4.1.388.1.50.121
Indicates that the Root AP connection is setup and is ready to forward data. - apMyMacAddr is the MAC address of the Access Point sending this trap message. - apAPMacAddr is the MAC address of the Root AP. - apNbrOfWLAPItfs is the number of current WLAP Interfaces established.
                   apDSRootWLAPLostTrap 1.3.6.1.4.1.388.1.50.122
If the current wireless AP does not receive Beacon packet from its Root AP within one second, it will consider the Root AP is lost. The wireless AP will eventually reset itself to re-establish the network topology. - apMyMacAddr is the MAC address of the Access Point sending this trap message. - apAPMacAddr is the MAC address of the Root AP. - apNbrOfWLAPItfs is the number of current WLAP Interfaces established.
                   apDSDsgntedWLAPUpTrap 1.3.6.1.4.1.388.1.50.123
Indicates that the Designated WLAP connection is setup and is ready to forward data. - apMyMacAddr is the MAC address of the Access Point sending this trap message. - apAPMacAddr is the MAC address of the Designated WLAP. - apNbrOfWLAPItfs is the number of current WLAP Interfaces established.
                   apDSDsgnatedWLAPLostTrap 1.3.6.1.4.1.388.1.50.124
If the current wireless AP does not receive Config BPDU (Bridge Protocol Data Unit) packet from its Designated WLAP for MAX AGE time, it will consider that the Designated WLAP is lost. - apMyMacAddr is the MAC address of the Access Point sending this trap message. - apAPMacAddr is the MAC address of the Designated WLAP. - apNbrOfWLAPItfs is the number of current WLAP Interfaces established.
                   apDSAPDHCPConfigChgTrap 1.3.6.1.4.1.388.1.50.130
If there are any DHCP network configuration change, This trap will be issued. - apMyMacAddr is the MAC address of the Access Point sending this trap message.
                   apDSAPDHCPLeaseUpTrap 1.3.6.1.4.1.388.1.50.131
If the Access point(Client) is unable to renew the DHCP lease before the lease is expired, this trap is generated. - apMyMacAddr is the MAC address of the Access Point sending this trap message.