STN-POLICY-MIB: View SNMP OID List / Download MIB

VENDOR: SPRING TIDE NETWORKS


 Home MIB: STN-POLICY-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, STN-ROUTER-MIB, SPRING-TIDE-NETWORKS-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 stnPm 1.3.6.1.4.1.3551.2.11
Added stnPmClassTable
       stnPmObjects 1.3.6.1.4.1.3551.2.11.1
           stnPmService 1.3.6.1.4.1.3551.2.11.1.1
               stnPmServiceTable 1.3.6.1.4.1.3551.2.11.1.1.1 no-access
A list of PM service entries.
                   stnPmServiceEntry 1.3.6.1.4.1.3551.2.11.1.1.1.1 no-access
Entry contains information about a particular policy manager service.
                       stnPmServiceIndex 1.3.6.1.4.1.3551.2.11.1.1.1.1.1 integer32 read-only
Index into service table
                       stnPmServiceName 1.3.6.1.4.1.3551.2.11.1.1.1.1.2 displaystring read-only
Name of service
                       stnPmServiceIdleTimeout 1.3.6.1.4.1.3551.2.11.1.1.1.1.3 integer32 read-only
Idle timeout for service
                       stnPmServiceNumPolicies 1.3.6.1.4.1.3551.2.11.1.1.1.1.4 integer32 read-only
Number of policies in this service
                       stnPmServiceEnabled 1.3.6.1.4.1.3551.2.11.1.1.1.1.5 truthvalue read-only
Flag to indicate if service is enabled
                       stnPmServiceType 1.3.6.1.4.1.3551.2.11.1.1.1.1.7 integer read-only
Type of service Enumeration: 'vpn': 1, 'qos': 5, 'firewall': 2, 'mpls': 6, 'forwarding': 4, 'ip-fileter': 3.
                       stnPmServiceFirewallID 1.3.6.1.4.1.3551.2.11.1.1.1.1.8 integer32 read-only
Instance of service's firewall record
           stnPmPolicy 1.3.6.1.4.1.3551.2.11.1.2
               stnPmPolicyTable 1.3.6.1.4.1.3551.2.11.1.2.1 no-access
A list of policy entries.
                   stnPmPolicyEntry 1.3.6.1.4.1.3551.2.11.1.2.1.1 no-access
Entry contains information about a particular policy.
                       stnPmPolicyServiceIndex 1.3.6.1.4.1.3551.2.11.1.2.1.1.1 integer32 read-only
Service index of policy
                       stnPmPolicyIndex 1.3.6.1.4.1.3551.2.11.1.2.1.1.2 integer32 read-only
Policy index of policy
                       stnPmPolicyName 1.3.6.1.4.1.3551.2.11.1.2.1.1.3 displaystring read-only
Policy name
                       stnPmPolicySrcAddrMatchType 1.3.6.1.4.1.3551.2.11.1.2.1.1.4 stnpmpolicymatchtype read-only
Type of match for source address
                       stnPmPolicySrcAddr 1.3.6.1.4.1.3551.2.11.1.2.1.1.5 ipaddress read-only
Source address to match
                       stnPmPolicySrcMask 1.3.6.1.4.1.3551.2.11.1.2.1.1.6 ipaddress read-only
Source IP netmask to match
                       stnPmPolicySrcEndAddr 1.3.6.1.4.1.3551.2.11.1.2.1.1.7 ipaddress read-only
End of source address range to match
                       stnPmPolicyDestAddrMatchType 1.3.6.1.4.1.3551.2.11.1.2.1.1.8 stnpmpolicymatchtype read-only
Type of match for source address
                       stnPmPolicyDestAddr 1.3.6.1.4.1.3551.2.11.1.2.1.1.9 ipaddress read-only
Source address to match
                       stnPmPolicyDestMask 1.3.6.1.4.1.3551.2.11.1.2.1.1.10 ipaddress read-only
Source IP netmask to match
                       stnPmPolicyDestEndAddr 1.3.6.1.4.1.3551.2.11.1.2.1.1.11 ipaddress read-only
End of source address range to match
                       stnPmPolicySrcPortMatchType 1.3.6.1.4.1.3551.2.11.1.2.1.1.12 stnpmpolicymatchtype read-only
Type of match for source port
                       stnPmPolicySrcPort 1.3.6.1.4.1.3551.2.11.1.2.1.1.13 integer32 read-only
Source port to match
                       stnPmPolicySrcEndPort 1.3.6.1.4.1.3551.2.11.1.2.1.1.14 integer32 read-only
End of source port range to match
                       stnPmPolicyDestPortMatchType 1.3.6.1.4.1.3551.2.11.1.2.1.1.15 stnpmpolicymatchtype read-only
Type of match for destination port
                       stnPmPolicyDestPort 1.3.6.1.4.1.3551.2.11.1.2.1.1.16 integer32 read-only
Destination port to match
                       stnPmPolicyDestEndPort 1.3.6.1.4.1.3551.2.11.1.2.1.1.17 integer32 read-only
End of destination port range to match
                       stnPmPolicyProtocolMatchType 1.3.6.1.4.1.3551.2.11.1.2.1.1.18 stnpmpolicymatchtype read-only
Type of match for protocol
                       stnPmPolicyProtocol 1.3.6.1.4.1.3551.2.11.1.2.1.1.19 integer read-only
Protocol to match Enumeration: 'udp': 17, 'esp': 50, 'ah': 51, 'tcp': 6, 'ipcomp': 108, 'icmp': 1.
                       stnPmPolicyAction 1.3.6.1.4.1.3551.2.11.1.2.1.1.20 integer read-only
Type of action to take upon policy match Enumeration: 'deny': 1, 'fec': 6, 'permit': 2, 'encaps': 4, 'reject': 5, 'secure': 3.
                       stnPmPolicyActionID 1.3.6.1.4.1.3551.2.11.1.2.1.1.21 integer32 read-only
Configuration ID of action record
                       stnPmPolicyDirection 1.3.6.1.4.1.3551.2.11.1.2.1.1.22 stnpmdirection read-only
Direction of policy
                       stnPmPolicyCreateMirror 1.3.6.1.4.1.3551.2.11.1.2.1.1.23 truthvalue read-only
Mirror policy flag
                       stnPmPolicySrcAddrSelector 1.3.6.1.4.1.3551.2.11.1.2.1.1.24 stnpmselectortype read-only
Source selector to choose for policy matching
                       stnPmPolicyDestAddrSelector 1.3.6.1.4.1.3551.2.11.1.2.1.1.25 stnpmselectortype read-only
Destination selector to choose for policy matching
                       stnPmPolicyEnabled 1.3.6.1.4.1.3551.2.11.1.2.1.1.26 truthvalue read-only
Flag to indicate if policy is enabled
                       stnPmPolicyMatches 1.3.6.1.4.1.3551.2.11.1.2.1.1.27 integer32 read-only
Number of times policy search matched this policy
                       stnPmPolicyMisses 1.3.6.1.4.1.3551.2.11.1.2.1.1.28 integer32 read-only
Number of times policy search did not match this policy
                       stnPmPolicyMarkedOctets 1.3.6.1.4.1.3551.2.11.1.2.1.1.29 counter64 read-only
Number of octets that have been marked for this policy.
                       stnPmPolicyMarkedPkts 1.3.6.1.4.1.3551.2.11.1.2.1.1.30 counter64 read-only
Number of packets that have been marked for this policy.
                       stnPmPolicyIcmpTypes 1.3.6.1.4.1.3551.2.11.1.2.1.1.31 unsigned32 read-only
ICMP Types matching the policy entry expressed as bit-map.
                       stnPmPolicyTosByteMatchType 1.3.6.1.4.1.3551.2.11.1.2.1.1.32 stnpmpolicymatchtype read-only
Type of match for TOS Byte
                       stnPmPolicyTosByteValue 1.3.6.1.4.1.3551.2.11.1.2.1.1.33 integer read-only
Value containing bits to set in TOS Byte
                       stnPmPolicyTosByteMask 1.3.6.1.4.1.3551.2.11.1.2.1.1.34 integer read-only
Mask indicating bits to match in TOS byte
                       stnPmPolicyMarkerID 1.3.6.1.4.1.3551.2.11.1.2.1.1.35 integer32 read-only
Configuration ID of marker to apply
                       stnPmPolicyTxclassID 1.3.6.1.4.1.3551.2.11.1.2.1.1.36 integer32 read-only
Configuration ID of transmit class to assign packet to
           stnPmPreference 1.3.6.1.4.1.3551.2.11.1.3
               stnPmPreferenceTable 1.3.6.1.4.1.3551.2.11.1.3.1 no-access
Entry contains information about a particular preference entry.
                   stnPmPreferenceEntry 1.3.6.1.4.1.3551.2.11.1.3.1.1 no-access
Entry contains information about a particular preference.
                       stnPmPreferenceIndex 1.3.6.1.4.1.3551.2.11.1.3.1.1.1 integer32 read-only
Preference index
                       stnPmPreferenceNum 1.3.6.1.4.1.3551.2.11.1.3.1.1.2 integer32 read-only
Preference number
                       stnPmPreferenceAhAlg 1.3.6.1.4.1.3551.2.11.1.3.1.1.3 stnpmauthalg read-only
AH authentication algorithm
                       stnPmPreferenceEspAuthAlg 1.3.6.1.4.1.3551.2.11.1.3.1.1.4 stnpmauthalg read-only
ESP authentication algorithm
                       stnPmPreferenceEspEncrAlg 1.3.6.1.4.1.3551.2.11.1.3.1.1.5 stnpmencralg read-only
ESP encryption algorithm
                       stnPmPreferenceLifeTime 1.3.6.1.4.1.3551.2.11.1.3.1.1.6 integer32 read-only
Life time in minutes
                       stnPmPreferenceLifeBytes 1.3.6.1.4.1.3551.2.11.1.3.1.1.7 integer32 read-only
Life value in kilobytes
                       stnPmPreferenceIPsecID 1.3.6.1.4.1.3551.2.11.1.3.1.1.8 integer32 read-only
ID of corresponding IPSEC record
                       stnPmPreferencePFSGroup 1.3.6.1.4.1.3551.2.11.1.3.1.1.9 integer read-only
ESP encryption algorithm Enumeration: 'group5': 5, 'group1': 1, 'group2': 2.
                       stnPmPreferenceDescription 1.3.6.1.4.1.3551.2.11.1.3.1.1.10 displaystring read-only
Description of preference
           stnPmIPsec 1.3.6.1.4.1.3551.2.11.1.4
               stnPmIPsecTable 1.3.6.1.4.1.3551.2.11.1.4.1 no-access
Entry contains information about a particular IPsec entry.
                   stnPmIPsecEntry 1.3.6.1.4.1.3551.2.11.1.4.1.1 no-access
Entry contains information about a particular IPsec entry.
                       stnPmIPsecIndex 1.3.6.1.4.1.3551.2.11.1.4.1.1.1 integer32 read-only
IPsec index
                       stnPmIPsecPeerIpAddr 1.3.6.1.4.1.3551.2.11.1.4.1.1.2 ipaddress read-only
IP address of peer for tunnel endpoint
                       stnPmIPsecLocalIpAddr 1.3.6.1.4.1.3551.2.11.1.4.1.1.3 ipaddress read-only
Local IP address for tunnel endpoint
                       stnPmIPsecMode 1.3.6.1.4.1.3551.2.11.1.4.1.1.4 integer read-only
Type of IPsec connection to create Enumeration: 'tunnel': 1, 'transport': 2.
                       stnPmIPsecKeyNegType 1.3.6.1.4.1.3551.2.11.1.4.1.1.5 integer read-only
Key negotiation method for IPsec Sa Enumeration: 'manual': 2, 'ike': 1.
                       stnPmIPsecName 1.3.6.1.4.1.3551.2.11.1.4.1.1.6 displaystring read-only
Description of IPsec entry
                       stnPmIPsecNumManualSAs 1.3.6.1.4.1.3551.2.11.1.4.1.1.7 integer32 read-only
Number of manual SAs assigned to this IPsec record
                       stnPmIPsecNumPreferences 1.3.6.1.4.1.3551.2.11.1.4.1.1.8 integer32 read-only
Number of preferences assigned to this IPsec record
                       stnPmIPsecReplayDetectionEnabled 1.3.6.1.4.1.3551.2.11.1.4.1.1.9 truthvalue read-only
Enable Replay detection.
           stnPmEncaps 1.3.6.1.4.1.3551.2.11.1.5
               stnPmEncapsTable 1.3.6.1.4.1.3551.2.11.1.5.1 no-access
Entry contains information about a particular Encaps entry.
                   stnPmEncapsEntry 1.3.6.1.4.1.3551.2.11.1.5.1.1 no-access
Entry contains information about a particular Encaps entry.
                       stnPmEncapsIndex 1.3.6.1.4.1.3551.2.11.1.5.1.1.1 integer32 read-only
Encaps index
                       stnPmEncapsPeerIpAddr 1.3.6.1.4.1.3551.2.11.1.5.1.1.2 ipaddress read-only
IP address of peer for tunnel endpoint
                       stnPmEncapsLocalIpAddr 1.3.6.1.4.1.3551.2.11.1.5.1.1.3 ipaddress read-only
Local IP address for tunnel endpoint
                       stnPmEncapsType 1.3.6.1.4.1.3551.2.11.1.5.1.1.4 integer read-only
Type of Encaps connection to create Enumeration: 'ip-ip': 1, 'ip-gre': 2.
                       stnPmEncapsGREKey 1.3.6.1.4.1.3551.2.11.1.5.1.1.5 integer32 read-only
GRE key
                       stnPmEncapsName 1.3.6.1.4.1.3551.2.11.1.5.1.1.6 displaystring read-only
Description of Encaps entry
           stnPmManualSa 1.3.6.1.4.1.3551.2.11.1.6
               stnPmManualSaTable 1.3.6.1.4.1.3551.2.11.1.6.1 no-access
Entry contains information about a particular ManualSa entry.
                   stnPmManualSaEntry 1.3.6.1.4.1.3551.2.11.1.6.1.1 no-access
Entry contains information about a particular ManualSa entry.
                       stnPmManualSaIndex 1.3.6.1.4.1.3551.2.11.1.6.1.1.1 integer32 read-only
ManualSa index
                       stnPmManualSaPeerIpAddr 1.3.6.1.4.1.3551.2.11.1.6.1.1.2 ipaddress read-only
IP address of peer for tunnel endpoint
                       stnPmManualSaDirection 1.3.6.1.4.1.3551.2.11.1.6.1.1.3 stnpmdirection read-only
Direction of manual SA
                       stnPmManualSaSPI 1.3.6.1.4.1.3551.2.11.1.6.1.1.4 integer32 read-only
SPI of manual SA
                       stnPmManualSaAhAlg 1.3.6.1.4.1.3551.2.11.1.6.1.1.5 stnpmauthalg read-only
AH authentication algorithm
                       stnPmManualSaAhKey 1.3.6.1.4.1.3551.2.11.1.6.1.1.6 octet string read-only
Authentication key for AH protocol
                       stnPmManualSaEspAuthAlg 1.3.6.1.4.1.3551.2.11.1.6.1.1.7 stnpmauthalg read-only
ESP authentication algorithm
                       stnPmManualSaEspAuthKey 1.3.6.1.4.1.3551.2.11.1.6.1.1.8 octet string read-only
Authentication key for ESP protocol
                       stnPmManualSaEspEncrAlg 1.3.6.1.4.1.3551.2.11.1.6.1.1.9 stnpmencralg read-only
ESP encryption algorithm
                       stnPmManualSaEspEncrKey 1.3.6.1.4.1.3551.2.11.1.6.1.1.10 octet string read-only
Encryption key for ESP protocol
                       stnPmManualSaIPsecID 1.3.6.1.4.1.3551.2.11.1.6.1.1.11 integer32 read-only
Index or corresponding IPsec record
                       stnPmManualSaDescription 1.3.6.1.4.1.3551.2.11.1.6.1.1.12 displaystring read-only
Description of manual SA entry
           stnPmMarker 1.3.6.1.4.1.3551.2.11.1.7
               stnPmMarkerTable 1.3.6.1.4.1.3551.2.11.1.7.1 no-access
Entry contains information about a particular Marker entry.
                   stnPmMarkerEntry 1.3.6.1.4.1.3551.2.11.1.7.1.1 no-access
Entry contains information about a particular Marker entry.
                       stnPmMarkerIndex 1.3.6.1.4.1.3551.2.11.1.7.1.1.1 integer32 read-only
Marker index
                       stnPmMarkerName 1.3.6.1.4.1.3551.2.11.1.7.1.1.2 displaystring read-only
Description of Marker entry
                       stnPmMarkerByteValue 1.3.6.1.4.1.3551.2.11.1.7.1.1.3 integer read-only
Value that the masked TOS byte must match
                       stnPmMarkerByteMask 1.3.6.1.4.1.3551.2.11.1.7.1.1.4 integer read-only
Mask applied to TOS byte for match
                       stnPmMarkerMarkedOctets 1.3.6.1.4.1.3551.2.11.1.7.1.1.5 counter64 read-only
Number of octets marked by this Marker.
                       stnPmMarkerMarkedPkts 1.3.6.1.4.1.3551.2.11.1.7.1.1.6 counter64 read-only
Number of packets marked by this Marker.
           stnPmProfile 1.3.6.1.4.1.3551.2.11.1.8
               stnPmProfileTable 1.3.6.1.4.1.3551.2.11.1.8.1 no-access
Entry contains information about a particular Profile entry.
                   stnPmProfileEntry 1.3.6.1.4.1.3551.2.11.1.8.1.1 no-access
Entry contains information about a particular Profile entry.
                       stnPmProfileIndex 1.3.6.1.4.1.3551.2.11.1.8.1.1.1 integer32 read-only
Profile index
                       stnPmProfileEnabled 1.3.6.1.4.1.3551.2.11.1.8.1.1.2 truthvalue read-only
Flag to indicate if profile is enabled
                       stnPmProfileName 1.3.6.1.4.1.3551.2.11.1.8.1.1.3 displaystring read-only
Description of Profile entry
                       stnPmProfileCommittedRate 1.3.6.1.4.1.3551.2.11.1.8.1.1.4 integer32 read-only
Rate in kbits per second the user or network is committed to transmit.
                       stnPmProfileCommittedBurst 1.3.6.1.4.1.3551.2.11.1.8.1.1.5 integer32 read-only
Maximum number of kbytes in a single transmission burst
                       stnPmProfileExcessRate 1.3.6.1.4.1.3551.2.11.1.8.1.1.6 integer32 read-only
Maximum acceptable rate in kbits per second the user or network is committed to transmit
                       stnPmProfileExcessBurst 1.3.6.1.4.1.3551.2.11.1.8.1.1.7 integer32 read-only
Maximum number of bytes in a single maximum transmission burst
                       stnPmProfileConformAction 1.3.6.1.4.1.3551.2.11.1.8.1.1.8 integer read-only
Type of action to take for conformant frames Enumeration: 'deny': 1, 'markandforward': 3, 'shape': 4, 'permit': 2.
                       stnPmProfileConformActionID 1.3.6.1.4.1.3551.2.11.1.8.1.1.9 integer32 read-only
Configuration ID of conform action record
                       stnPmProfileCautionAction 1.3.6.1.4.1.3551.2.11.1.8.1.1.10 integer read-only
Type of action to take for caution frames Enumeration: 'deny': 1, 'markandforward': 3, 'shape': 4, 'permit': 2.
                       stnPmProfileConformOctets 1.3.6.1.4.1.3551.2.11.1.8.1.1.11 counter64 read-only
Number of octets in conformant frames that have arrived.
                       stnPmProfileConformPkts 1.3.6.1.4.1.3551.2.11.1.8.1.1.12 counter64 read-only
Number of conformant frames that have arrived.
                       stnPmProfileCautionActionID 1.3.6.1.4.1.3551.2.11.1.8.1.1.13 integer32 read-only
Configuration ID of caution action record
                       stnPmProfileExceedAction 1.3.6.1.4.1.3551.2.11.1.8.1.1.14 integer read-only
Type of action to take for exceeding frames Enumeration: 'deny': 1, 'markandforward': 3, 'shape': 4, 'permit': 2.
                       stnPmProfileCautionOctets 1.3.6.1.4.1.3551.2.11.1.8.1.1.15 counter64 read-only
Number of octets in caution frames that have arrived.
                       stnPmProfileCautionPkts 1.3.6.1.4.1.3551.2.11.1.8.1.1.16 counter64 read-only
Number of caution frames that have arrived.
                       stnPmProfileExceedActionID 1.3.6.1.4.1.3551.2.11.1.8.1.1.17 integer32 read-only
Configuration ID of exceeding action record
                       stnPmProfileExceedOctets 1.3.6.1.4.1.3551.2.11.1.8.1.1.18 counter64 read-only
Number of octets in exceeding frames that have arrived.
                       stnPmProfileExceedPkts 1.3.6.1.4.1.3551.2.11.1.8.1.1.19 counter64 read-only
Number of exceeding frames that have arrived.
           stnPmQueue 1.3.6.1.4.1.3551.2.11.1.9
               stnPmQueueTable 1.3.6.1.4.1.3551.2.11.1.9.1 no-access
Entry contains information about a particular Queue entry.
                   stnPmQueueEntry 1.3.6.1.4.1.3551.2.11.1.9.1.1 no-access
Entry contains information about a particular Queue entry.
                       stnPmQueueIndex 1.3.6.1.4.1.3551.2.11.1.9.1.1.1 integer32 read-only
Queue index
                       stnPmQueueName 1.3.6.1.4.1.3551.2.11.1.9.1.1.2 displaystring read-only
Description of Queue entry
                       stnPmQueueThreshold 1.3.6.1.4.1.3551.2.11.1.9.1.1.3 integer32 read-only
Queue Drop Threshold
                       stnPmQueueDropType 1.3.6.1.4.1.3551.2.11.1.9.1.1.4 integer read-only
Type of algorithm used to drop packets when threshold is reached Enumeration: 'other': 1, 'tailDrop': 2, 'headDrop': 3.
                       stnPmQueueDropHCOctets 1.3.6.1.4.1.3551.2.11.1.9.1.1.5 counter64 read-only
Number of octets that have been dropped this queue.
                       stnPmQueueDropHCPkts 1.3.6.1.4.1.3551.2.11.1.9.1.1.6 counter64 read-only
Number of packets that have been dropped this queue.
                       stnPmQueueQueueLen 1.3.6.1.4.1.3551.2.11.1.9.1.1.7 counter32 read-only
Number of packets currently in the queue.
                       stnPmQueueMaxQueueLen 1.3.6.1.4.1.3551.2.11.1.9.1.1.8 counter32 read-only
Maximum number of packets in queue since last statistics reset.
           stnPmTraps 1.3.6.1.4.1.3551.2.11.1.10
                 stnPmFirewallTrap 1.3.6.1.4.1.3551.2.11.1.10.1
                     stnPmFirewallTrapVars 1.3.6.1.4.1.3551.2.11.1.10.1.1
                         stnPmFirewallEventLogMsg 1.3.6.1.4.1.3551.2.11.1.10.1.1.1 displaystring read-only
Describes SNMP Trap generated by STN Firewall
                     stnPmFirewallNotificationPrefix 1.3.6.1.4.1.3551.2.11.1.10.1.2
                         stnPmFirewallNotification 1.3.6.1.4.1.3551.2.11.1.10.1.2.0
                             stnPmFirewallLog 1.3.6.1.4.1.3551.2.11.1.10.1.2.0.1
This trap is generated by Policy manager's Firewall subsystem. This SNMP trap is generated in response to firewall event logging.
                 stnPmQosTrap 1.3.6.1.4.1.3551.2.11.1.10.2
                     stnPmQosTrapVars 1.3.6.1.4.1.3551.2.11.1.10.2.1
                         stnPmQosLatestFlowCB 1.3.6.1.4.1.3551.2.11.1.10.2.1.1 integer32 read-only
Value of the FlowCB Created
                         stnPmQosLastDroppedPacket 1.3.6.1.4.1.3551.2.11.1.10.2.1.2 integer32 read-only
Value of a dropped packet
                     stnPmQosNotificationPrefix 1.3.6.1.4.1.3551.2.11.1.10.2.2
                         stnPmQosNotification 1.3.6.1.4.1.3551.2.11.1.10.2.2.0
                             stnPmQosFlowCBCreated 1.3.6.1.4.1.3551.2.11.1.10.2.2.0.1
This trap is generated by Policy manager's QoS subsystem. This SNMP trap is generated in response to QoS creating and installing a flow.
                             stnPmQosFlowCBRemoved 1.3.6.1.4.1.3551.2.11.1.10.2.2.0.2
This trap is generated by Policy manager's QoS subsystem. This SNMP trap is generated in response to QoS removing a flow.
                             stnPmQosShapingPacketDiscard 1.3.6.1.4.1.3551.2.11.1.10.2.2.0.3
This trap is generated by Policy manager's QoS subsystem. This SNMP trap is generated in response to QoS dropping a packet due to rate shaping.
                             stnPmQosThresholdPacketDiscard 1.3.6.1.4.1.3551.2.11.1.10.2.2.0.4
This trap is generated by Policy manager's QoS subsystem. This SNMP trap is generated in response to QoS dropping a packet due to exceeding a threshold.
           stnPmFirewall 1.3.6.1.4.1.3551.2.11.1.11
                 stnPmFirewallTable 1.3.6.1.4.1.3551.2.11.1.11.1 no-access
Entry contains information about a particular Firewall entry.
                     stnPmFirewallEntry 1.3.6.1.4.1.3551.2.11.1.11.1.1 no-access
Entry contains information about a particular Firewall entry.
                         stnPmFirewallIndex 1.3.6.1.4.1.3551.2.11.1.11.1.1.1 integer32 read-only
Firewall index
                         stnPmFirewallName 1.3.6.1.4.1.3551.2.11.1.11.1.1.2 displaystring read-only
Description of firewall entry
                         stnPmFirewallAcceptOtherIPOptions 1.3.6.1.4.1.3551.2.11.1.11.1.1.3 truthvalue read-only
Accept packets with other IP options (non source routing).
                         stnPmFirewallAcceptSourceRouting 1.3.6.1.4.1.3551.2.11.1.11.1.1.4 truthvalue read-only
Accept packets with source routing options
                         stnPmFirewallTcpAckLifeTime 1.3.6.1.4.1.3551.2.11.1.11.1.1.5 integer32 read-only
TCP ACK lifetime
                         stnPmFirewallTcpSynLifeTime 1.3.6.1.4.1.3551.2.11.1.11.1.1.6 integer32 read-only
TCP SYN lifetime
                         stnPmFirewallTcpFinLifeTime 1.3.6.1.4.1.3551.2.11.1.11.1.1.7 integer32 read-only
TCP FIN lifetime
                         stnPmFirewallTcpRstLifeTime 1.3.6.1.4.1.3551.2.11.1.11.1.1.8 integer32 read-only
TCP RST lifetime
                         stnPmFirewallTcpInactivityLifeTime 1.3.6.1.4.1.3551.2.11.1.11.1.1.9 integer32 read-only
TCP inactivity lifetime
                         stnPmFirewallUdpInactivityLifeTime 1.3.6.1.4.1.3551.2.11.1.11.1.1.10 integer32 read-only
UDP inactivity lifetime
                         stnPmFirewallSynAttackDetection 1.3.6.1.4.1.3551.2.11.1.11.1.1.11 truthvalue read-only
Enable SYN attack detection
                         stnPmFirewallLandAttackDetection 1.3.6.1.4.1.3551.2.11.1.11.1.1.12 truthvalue read-only
Enable Land attack detection
                         stnPmFirewallPingFloodingDetection 1.3.6.1.4.1.3551.2.11.1.11.1.1.13 truthvalue read-only
Enable ping flooding attack detection
                         stnPmFirewallPingOfDeathDetection 1.3.6.1.4.1.3551.2.11.1.11.1.1.14 truthvalue read-only
Enable ping of death attack detection
                         stnPmFirewallPortScanDetection 1.3.6.1.4.1.3551.2.11.1.11.1.1.15 truthvalue read-only
Enable port scan attack detection
                         stnPmFirewallPingScanDetection 1.3.6.1.4.1.3551.2.11.1.11.1.1.16 truthvalue read-only
Enable ping scan/sweep attack detection
                         stnPmFirewallTcpSynBacklogQueueSize 1.3.6.1.4.1.3551.2.11.1.11.1.1.17 integer32 read-only
Size of the SYN backlog queue
                         stnPmFirewallPingsPerMinute 1.3.6.1.4.1.3551.2.11.1.11.1.1.18 integer32 read-only
Maximum number of pings allowed per minute
                         stnPmFirewallMaxPingSize 1.3.6.1.4.1.3551.2.11.1.11.1.1.19 integer32 read-only
Maximum allowable size for ping
                         stnPmFirewallEnableDynamicPortApps 1.3.6.1.4.1.3551.2.11.1.11.1.1.20 unsigned32 read-only
Enabled Dynamic port applications expressed as bit-map.
                         stnPmFirewallMaxDynHashTableSize 1.3.6.1.4.1.3551.2.11.1.11.1.1.21 integer32 read-only
Max dynamic hash table size - must be a power of 2.
                         stnPmFirewallMinLogPeriod 1.3.6.1.4.1.3551.2.11.1.11.1.1.22 integer32 read-only
Minimim period between event logs
           stnPmFirewallAction 1.3.6.1.4.1.3551.2.11.1.12
                 stnPmFirewallActionTable 1.3.6.1.4.1.3551.2.11.1.12.1 no-access
Entry contains information about a particular Firewall Action entry.
                     stnPmFirewallActionEntry 1.3.6.1.4.1.3551.2.11.1.12.1.1 no-access
Entry contains information about a particular Firewall Action entry.
                         stnPmFirewallActionIndex 1.3.6.1.4.1.3551.2.11.1.12.1.1.1 integer32 read-only
Firewall Action index
                         stnPmFirewallActionName 1.3.6.1.4.1.3551.2.11.1.12.1.1.2 displaystring read-only
Description of firewall entry
                         stnPmFirewallActionTrackingType 1.3.6.1.4.1.3551.2.11.1.12.1.1.3 integer read-only
TCP ACK lifetime Enumeration: 'none': 1, 'short': 2, 'trap': 4, 'long': 3.
                         stnPmFirewallActionStateful 1.3.6.1.4.1.3551.2.11.1.12.1.1.4 truthvalue read-only
Perform stateful processing
                         stnPmFirewallActionInactivityLifeTime 1.3.6.1.4.1.3551.2.11.1.12.1.1.5 integer32 read-only
Inactivity lifetime
                         stnPmFirewallActionRejectAction 1.3.6.1.4.1.3551.2.11.1.12.1.1.6 integer read-only
Firewall policy reject action. Enumeration: 'icmpUnreachPort': 2, 'none': 1, 'tcpReset': 3.
           stnPmServiceList 1.3.6.1.4.1.3551.2.11.1.13
                 stnPmServiceListTable 1.3.6.1.4.1.3551.2.11.1.13.1 no-access
Entry contains information about a particular Firewall Action entry.
                     stnPmServiceListEntry 1.3.6.1.4.1.3551.2.11.1.13.1.1 no-access
Entry contains information about a particular Firewall Action entry.
                         stnPmServiceListIndex 1.3.6.1.4.1.3551.2.11.1.13.1.1.1 integer32 read-only
Service List Action index
                         stnPmServiceListName 1.3.6.1.4.1.3551.2.11.1.13.1.1.2 displaystring read-only
Description of service list entry
                         stnPmServiceListConnIdleTimeout 1.3.6.1.4.1.3551.2.11.1.13.1.1.3 integer32 read-only
Idle timeout
                         stnPmServiceListNumServices 1.3.6.1.4.1.3551.2.11.1.13.1.1.4 integer32 read-only
Number of services in this serviceList
                         stnPmServiceListEnabled 1.3.6.1.4.1.3551.2.11.1.13.1.1.5 truthvalue read-only
Flag to indicate if service is enabled
           stnPmSLService 1.3.6.1.4.1.3551.2.11.1.14
                 stnPmSLServiceTable 1.3.6.1.4.1.3551.2.11.1.14.1 no-access
A list of PM service entries.
                     stnPmSLServiceEntry 1.3.6.1.4.1.3551.2.11.1.14.1.1 no-access
Entry contains information about a particular policy manager service.
                         stnPmSLIndex 1.3.6.1.4.1.3551.2.11.1.14.1.1.1 integer32 read-only
Index into service-list table
                         stnPmSLServiceIndex 1.3.6.1.4.1.3551.2.11.1.14.1.1.2 integer32 read-only
Index into service table
                         stnPmSLServiceName 1.3.6.1.4.1.3551.2.11.1.14.1.1.3 displaystring read-only
Name of service
                         stnPmSLServiceIdleTimeout 1.3.6.1.4.1.3551.2.11.1.14.1.1.4 integer32 read-only
Idle timeout for service
                         stnPmSLServiceNumPolicies 1.3.6.1.4.1.3551.2.11.1.14.1.1.5 integer32 read-only
Number of policies in this service
                         stnPmSLServiceEnabled 1.3.6.1.4.1.3551.2.11.1.14.1.1.6 truthvalue read-only
Flag to indicate if service is enabled
                         stnPmSLServiceType 1.3.6.1.4.1.3551.2.11.1.14.1.1.7 integer read-only
Type of service Enumeration: 'vpn': 1, 'qos': 5, 'firewall': 2, 'mpls': 6, 'forwarding': 4, 'ip-fileter': 3.
                         stnPmSLServiceFirewallID 1.3.6.1.4.1.3551.2.11.1.14.1.1.8 integer32 read-only
Instance of service's firewall record
           stnPmClass 1.3.6.1.4.1.3551.2.11.1.15
                 stnPmClassTable 1.3.6.1.4.1.3551.2.11.1.15.1 no-access
This table is a 'flattened' version of a hierarchical class trees that specify the bandwidth allocation for the CBQ interfaces of the system. Each tree is rooted at an interface. A class may either be a leaf, meaning it has no children, or it may be an interior class which has children. As packets are forwarded out an interface, they are compared to the 'flow definition' of each class down the tree until a matching leaf is found or until all classes are traversed. Once a matching class is found, the packet is transmitted or not based on the constraints configured for the class, most importantly the allocated bandwidth as identified by stnPmClassRate. If no matching class is found, the packet is dropped.
                     stnPmClassEntry 1.3.6.1.4.1.3551.2.11.1.15.1.1 no-access
Information about a single traffic class. Traffic classes are identified by their associated interface's ifIndex and their name. (Which means class names must be unique for a particular interface.) Finally, the following objects cannot be modified once the row is active: stnPmClassParent, and stnPmClassQueueElasticityFactor.
                         stnPmIfIndex 1.3.6.1.4.1.3551.2.11.1.15.1.1.1 interfaceindex read-only
A sequence number that identifies a particular interface the class has been installed on.
                         stnPmTxclassInstance 1.3.6.1.4.1.3551.2.11.1.15.1.1.2 integer32 read-only
The instance of the configuration record for the tranmsit class that the interface is using.
                         stnPmClassName 1.3.6.1.4.1.3551.2.11.1.15.1.1.3 displaystring read-only
A user-defined name for the traffic class. This is the unique identifier for the class within the scope of the interface. For example, the class that defines the IP address range for a particular customer might be 'Customer Fred Co.'
                         stnPmClassParent 1.3.6.1.4.1.3551.2.11.1.15.1.1.4 displaystring read-only
Name of class parent
                         stnPmClassRate 1.3.6.1.4.1.3551.2.11.1.15.1.1.5 stnpmbitrate read-only
A fraction of the bandwidth of the root interface to be allocated to this traffic class. Note that specifying 0 bits/second effectively filters all traffic that matches this class' flow specification. Also note that the sum of bit rates for all classes defined under the same class must be less than or equal to stnPmClassRate of the parent.
                         stnPmClassPriority 1.3.6.1.4.1.3551.2.11.1.15.1.1.6 integer32 read-only
The priority for this class. The smaller the value, the higher the priority. Delay-sensitive flows (such as video or audio) should be given higher priority values.
                         stnPmClassMaxIdle 1.3.6.1.4.1.3551.2.11.1.15.1.1.7 integer32 read-only
An upper bound for the average idle time (see the DESCRIPTION of stnPmClassStatsIdle). Thus, stnPmClassMaxIdle limits the 'credit' given to a class that has recently been under its allocation.
                         stnPmClassMinIdle 1.3.6.1.4.1.3551.2.11.1.15.1.1.8 integer32 read-only
The negative lower bound of the average idle. Thus, a negative minidle lets the router 'remember' that a class has recently used more than its allocated bandwidth.
                         stnPmClassMaxQueueLen 1.3.6.1.4.1.3551.2.11.1.15.1.1.9 integer32 read-only
A factor used to influence whether this traffic class gets a proportionally larger or smaller queue size than other classes. Other factors in the queue size include the percent bandwidth allocated to this class and the priority.
                         stnPmClassOperStatus 1.3.6.1.4.1.3551.2.11.1.15.1.1.10 integer read-only
The actual operational status of the traffic class. The value 'up(1)' means this traffic class is in use, the value 'down(2)' indicates the traffic class is not in use either due to an internal problem or because it (or an ancestor) is administratively disabled, and the value 'downConflict(3)' indicates the class definition conflicts with those of its siblings. The value autoClassActive(4) means that the class is a dynamically created AutoClass, which may not be modified in any way until it is saved to Non-Volatile configuration memory. After an AutoClass is saved to NVRAM, it's operational status will transistion to up (1). Enumeration: 'down': 2, 'autoClassActive': 4, 'up': 1, 'downConflict': 3.
                         stnPmClassBwUse 1.3.6.1.4.1.3551.2.11.1.15.1.1.11 integer read-only
An indication of whether this traffic class has used its allocated bandwidth, has not used its allocated bandwidth or has used more than its allocated bandwidth and is therefore 'atLimit(1)', 'underLimit(2)', or 'overLimit(3)' respectively. Enumeration: 'overLimit': 3, 'atLimit': 1, 'underLimit': 2.
                         stnPmClassUnsatisfied 1.3.6.1.4.1.3551.2.11.1.15.1.1.12 truthvalue read-only
An indication of whether this traffic class is 'unsatisfied'. The value of this object is 'true(1)' if it is underLimit and has a persistent backlog, meaning it has packets waiting in its queue. The value is 'false(1)' otherwise. Note that a class can be considered satisfied if it is underLimit and it just hasn't had anything to transmit. The presence of an unsatisfied class indicates that some other class is overLimit and 'hogging' bandwidth. Persistently unsatisfied classes indicate that tuning some of the parameters (such as stnPmClassMaxIdle or stnPmClassBounded) may be necessary.
                         stnPmClassQueueSize 1.3.6.1.4.1.3551.2.11.1.15.1.1.13 gauge32 read-only
The size of the queue associated with this traffic class. This is the maximum number of packets that can be in the queue, not the number that are currently queued (see stnPmClassStatsQueuedPkts).
                         stnPmClassMaxRate 1.3.6.1.4.1.3551.2.11.1.15.1.1.14 stnpmbitrate read-only
The maximum bandwidth the class may achieve, including bandwidth allocated to this class, and any bandwidth that may be borrowed. A value of zero (0) indicates that this feature is not being used. The stnPmClassMaxRate must be set to a value higher than the stnPmClassRate, but may also exceed the parent class's stnPmClassRate.
                         stnPmClassDescription 1.3.6.1.4.1.3551.2.11.1.15.1.1.15 displaystring read-only
Textual name associated with this class.
                         stnPmClassStatsHighWater 1.3.6.1.4.1.3551.2.11.1.15.1.1.16 counter32 read-only
The historical maximum number of packets that were queued for this class since the system was last reinitialized.
                         stnPmClassStatsIdle 1.3.6.1.4.1.3551.2.11.1.15.1.1.17 integer32 read-only
The difference between the desired time and the measured actual time between the most recent packet transmissions for the last two packets sent from this class. When the connection is sending perfectly at its allocated rate, then stnPmClassIdle is zero. When the connection is sending more than its allocated bandwidth, then stnPmClassIdle is negative.
                         stnPmClassStatsQueuedPkts 1.3.6.1.4.1.3551.2.11.1.15.1.1.18 gauge32 read-only
The current number of packets in the class' queue.
                         stnPmClassStatsOctets 1.3.6.1.4.1.3551.2.11.1.15.1.1.19 counter32 read-only
The number of bytes transmitted for this traffic class. Note that a class with a configured stnPmClassRate of 0 bits/second will never transmit any octets and therefore this object's value will be 0. These filtered octets will be counted as part of stnPmClassStatsDroppedOctets.
                         stnPmClassStatsPkts 1.3.6.1.4.1.3551.2.11.1.15.1.1.20 counter32 read-only
The number of packets transmitted for this traffic class. Note that a class with a configured stnPmClassRate of 0 bits/second will never transmit any packets and therefore this object's value will be 0. These filtered packets will be counted as part of stnPmClassStatsDroppedPkts.
                         stnPmClassStatsOverLimits 1.3.6.1.4.1.3551.2.11.1.15.1.1.21 counter32 read-only
A count of the number of times the class used more than its allocated bandwidth.
                         stnPmClassStatsBorrowAttempts 1.3.6.1.4.1.3551.2.11.1.15.1.1.22 counter32 read-only
A count of the number of times the class attempted to 'borrow' bandwidth from another class.
                         stnPmClassStatsDroppedOctets 1.3.6.1.4.1.3551.2.11.1.15.1.1.23 counter32 read-only
A count of the number of octets dropped for this class because of lack of buffer space in the queue or because the class exceeded its allocated bandwidth.
                         stnPmClassStatsDroppedPkts 1.3.6.1.4.1.3551.2.11.1.15.1.1.24 counter32 read-only
A count of the number of packets dropped for this class because of lack of buffer space in the queue or because the class exceeded its allocated bandwidth.
                         stnPmClassStatsThrottles 1.3.6.1.4.1.3551.2.11.1.15.1.1.25 counter32 read-only
A count of the number of times the class was throttled (not allowed to transmit packets) by the link-sharing algorithm.
                         stnPmClassStatsUnsatisfieds 1.3.6.1.4.1.3551.2.11.1.15.1.1.26 counter32 read-only
A count of the number of times the class was unsatisfied, as indicated by the stnPmClassUnsatisfied object.
                         stnPmClassStatsAggrOctets 1.3.6.1.4.1.3551.2.11.1.15.1.1.27 counter32 read-only
The aggregate number of bytes transmitted by the children of this traffic class.
                         stnPmClassStatsAggrPkts 1.3.6.1.4.1.3551.2.11.1.15.1.1.28 counter32 read-only
The aggregate number of packets transmitted by the children of this traffic class.
           stnPMProxyTunnel 1.3.6.1.4.1.3551.2.11.1.16
       stnPmMibConformance 1.3.6.1.4.1.3551.2.11.2