SONUS-NODE-RESOURCES-MIB: View SNMP OID List / Download MIB

VENDOR: SONUS NETWORKS


 Home MIB: SONUS-NODE-RESOURCES-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 sonusNodeResourcesMIB 1.3.6.1.4.1.2879.2.2.2
The MIB Module for Node Resources Management.
     sonusNodeResourcesMIBObjects 1.3.6.1.4.1.2879.2.2.2.1
         sonusServProfile 1.3.6.1.4.1.2879.2.2.2.1.1
             sonusServProfileNextIndex 1.3.6.1.4.1.2879.2.2.2.1.1.1 integer32 read-only
This field is deprecated. The next valid index to use when creating an entry in the sonusServProfileTable.
             sonusServProfileTable 1.3.6.1.4.1.2879.2.2.2.1.1.2 no-access
This field is deprecated. This table specifies the service profile list for the node.
                 sonusServProfileEntry 1.3.6.1.4.1.2879.2.2.2.1.1.2.1 no-access
This field is deprecated.
                     sonusServProfileIndex 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.1 integer32 read-only
This field is deprecated. Identifies the target service profile entry.
                     sonusServProfileState 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.2 integer read-write
This field is deprecated. The administrative state of this service profile entry. Enumeration: 'disabled': 1, 'enabled': 2.
                     sonusServProfileName 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.3 sonusname read-write
This field is deprecated. The user name of this service profile.
                     sonusServProfileType 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.4 integer read-write
This field is deprecated. The type of endpoint (circuit or packet) supported by this service profile. Circuit endpoints support all the VCkt and VPkt profile parameters for echo cancellation and packetization. Packet endpoints support only the VPkt parameters for packetization. Enumeration: 'packet': 2, 'circuit': 1.
                     sonusServProfileVCktEncoding 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.5 integer read-write
This field is deprecated. The audio encoding method to be performed on the voice data received from, and destined to the PSTN. The default encoding method is G.711 Ulaw. Enumeration: 'none': 5, 'g711ulaw': 1, 'g711alaw': 2.
                     sonusServProfileVCktBandwidth 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.6 integer32 read-write
This field is deprecated. The number of DS0 channels to group for Nx64 connections. Valid entries are 1 to 24 channels, allowing up to a complete set of T1 channels to be grouped at a single connection. The default bandwidth is 1 channel.
                     sonusServProfileVCktNecEnable 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.7 integer read-write
This field is deprecated. Specifies whether Network Echo Cancellation (NEC) is enabled for the channel. When enabled, NEC is enabled acording to the appropriate NEC configuration parameters. When disabled, the Voice Packet Assembler/Disassember (VPAD) operates in a circuit emulation mode. Enumeration: 'disabled': 1, 'enabled': 2.
                     sonusServProfileVPktEncoding 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.8 integer read-write
This field is deprecated. The audio encoding method to be performed on the packet data received from, and destined to the IP network. The default encoding method is G.711 Ulaw. Enumeration: 'g729a': 4, 'g7231': 3, 'none': 5, 'g711ulaw': 1, 'g711alaw': 2.
                     sonusServProfileVPktFrameSize 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.9 integer32 read-write
This field is deprecated. Specifies the number of samples per frame. For G.711 encoding mode, value must be a multiple of 8 samples. For G.723 encoding mode, value must be a multiple of 240 samples. For G.729A, value must be a multiple of 80 samples. Note that 8 samples represent one millisecond of voice data. A value of 0 specifies a frame size equal to the minimum for the encoding method (e.g 8 samples for G.711)
                     sonusServProfileVPktFramesPerPacket 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.10 integer32 read-write
This field is deprecated. Specifies the number of frames to transmit per packet. For G.711 encoding mode, valid values range from 5 to 40 frames, in increments of 5 frames. The default value for G.711 is 10 frames per packet. For G.723 encoding mode, valid values are 1 or 2, with a default value of 1 frame per packet. A value of 0 specifies the number of frames per packet equal to the default value for the encoding mode (e.g. 10 frames per packet for G.711).
                     sonusServProfileVPktMaxNetworkJitter 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.11 integer32 read-write
This field is deprecated. Specifies the maximum expected network jitter across the IP network in increments of 125usec. This value defines the size of the initial playout buffer required to absorb the maximum expected packet delay across the network. The minimum value is 40 (5msec) and the maximum value is 400 (50msec), with a default value of 80 (10msec).
                     sonusServProfileVPktTosValue 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.12 integer32 read-write
This field is deprecated. Specifies the Type Of Service (TOS) parameters to be provided in the IP header for voice packets. The TOS value is specified as an 8-bit hex value 0x00-0xFF allowing complete flexibility with respect to the contents of the TOS byte.
                     sonusServProfileCttTestType 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.13 integer read-write
This field is deprecated. For ISUP service profiles, specifies the type of continuity test to perform, based on the configuration of the remote switch or trunk connection. The remoteLoopback test is used when the remote switch will loop back channel being tested. The remote2Wire test is used when the remote switch supports the 2 wire continuity test procedure. And the remote4Wire test mode is used when the remote switch supports the 4 wire continuity test procedure. The default value is remoteLoopback. Enumeration: 'remote2Wire': 2, 'remote4Wire': 3, 'remoteLoopback': 1.
                     sonusServProfileCttTimeout 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.14 integer32 read-write
This field is deprecated. For ISUP service profiles, specifies the overall test timeout value. The continuity test will be declared failed if the continuity tone is not detected within this timeout period. The timeout is specified in seconds, with a default value of 2 seconds.
                     sonusServProfileCttMinDetectTime 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.15 integer32 read-write
This field is deprecated. For ISUP service profiles, specifies the minimum time to detect the presence of the continuity test tone. The minimum detect time is specified in milliseconds, with a default time of 45 ms.
                     sonusServProfileCttMinReleaseTime 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.16 integer32 read-write
This field is deprecated. For ISUP service profiles, specifies the minimum time to detect that the continuity test tone has been removed and is no longer present. The minimum release time is specified in milliseconds, with a default time of 25 ms.
                     sonusServProfileCapability 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.17 integer read-write
This field is deprecated. Specifies the data capabilities for the circuit. This parameter specifies whether voice only, circuit mode data only, or both voice and circuit mode data can be supported by the circuit. Enumeration: 'voiceOrCircuitModeData': 3, 'circuitModeData': 2, 'voiceOnly': 1.
                     sonusServProfileDPktRestrictedCfg 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.18 integer read-write
This field is deprecated. Specifies whether the circuit may support 64 Kbit/s unrestricted data, or if the circuit supports 56 Kbit/s restricted data. Enumeration: 'restricted': 2, 'unrestricted': 1.
                     sonusServProfileDPktRtpPayloadType 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.19 integer32 read-write
This field is deprecated. Specifies the RTP payload type to be included in the RTP header of the voice data packet
                     sonusServProfileDPktMaxNetworkJitter 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.20 integer32 read-write
This field is deprecated. Specifies the maximum expected network jitter across the network for data calls in increments of 125usec. This value defines the size of the initial playout buffer required to absorb the maximum expected packet delay across the network. A separate value for data calls is provided to allow a single service profile to specify the jitter buffer size for both voice calls and data calls. The minimum value is 40 (5msec) and the maximum value is 400 (50msec), with a default value of 400 (50msec).
                     sonusServProfileRowStatus 1.3.6.1.4.1.2879.2.2.2.1.1.2.1.21 rowstatus read-write
This field is deprecated.
         sonusSonicBusStatTable 1.3.6.1.4.1.2879.2.2.2.1.2 no-access
This table presents Sonic Bus statistics for the node.
             sonusSonicBusStatEntry 1.3.6.1.4.1.2879.2.2.2.1.2.1 no-access
                 sonusSonicBusStatShelfIndex 1.3.6.1.4.1.2879.2.2.2.1.2.1.1 integer32 read-only
Identifies the target shelf.
                 sonusSonicBusStatNumCalls 1.3.6.1.4.1.2879.2.2.2.1.2.1.2 integer32 read-only
Indicates the number of active calls on the shelf.
                 sonusSonicBusStatBwAllocated 1.3.6.1.4.1.2879.2.2.2.1.2.1.3 integer32 read-only
Indicates the percentage of Sonic Bus bandwidth allocated to the active calls on the shelf.
                 sonusSonicBusStatSduCount 1.3.6.1.4.1.2879.2.2.2.1.2.1.4 integer32 read-only
Indicates the number of Sonic Bus data units allocated to the active calls on the shelf.
         sonusActiveCallTable 1.3.6.1.4.1.2879.2.2.2.1.3 no-access
This table presents the active call data for the node.
             sonusActiveCallEntry 1.3.6.1.4.1.2879.2.2.2.1.3.1 no-access
                 sonusActiveCallShelfIndex 1.3.6.1.4.1.2879.2.2.2.1.3.1.1 integer32 read-only
Identifies the target shelf.
                 sonusActiveCallSlotIndex 1.3.6.1.4.1.2879.2.2.2.1.3.1.2 integer32 read-only
Identifies the target slot.
                 sonusActiveCallIndex 1.3.6.1.4.1.2879.2.2.2.1.3.1.3 integer32 read-only
Identifies the target call index.
                 sonusActiveCallId 1.3.6.1.4.1.2879.2.2.2.1.3.1.4 integer32 read-only
Represents the global call identifier (GCID) for the call. GCID is unique across the entire node.
                 sonusActiveCallSonicBusUnitsAllocated 1.3.6.1.4.1.2879.2.2.2.1.3.1.5 integer32 read-only
Represents the SonicBus bandwidth allocated for the call expressed as SonicData Units per second.
                 sonusActiveCallNumResources 1.3.6.1.4.1.2879.2.2.2.1.3.1.6 integer32 read-only
Represents the number of resources currently allocated to the call.
                 sonusActiveCallState 1.3.6.1.4.1.2879.2.2.2.1.3.1.7 displaystring read-only
Represents the current call state.
                 sonusActiveCallIngressServProfile 1.3.6.1.4.1.2879.2.2.2.1.3.1.8 displaystring read-only
The name of the ingress service profile associated with this call.
                 sonusActiveCallEgressServProfile 1.3.6.1.4.1.2879.2.2.2.1.3.1.9 displaystring read-only
The name of the egress service profile associated with this call.
                 sonusActiveCallCallingNum 1.3.6.1.4.1.2879.2.2.2.1.3.1.10 displaystring read-only
The E.164 number representing the Calling Party's telephone number.
                 sonusActiveCallCalledNum 1.3.6.1.4.1.2879.2.2.2.1.3.1.11 displaystring read-only
The E.164 number representing the Called Party's telephone number.
                 sonusActiveCallAddressTransPerformed 1.3.6.1.4.1.2879.2.2.2.1.3.1.12 integer read-only
Indicates whether any address translation has been performed on the called party number. Valid translations are Local Number Portability (LPN), and 800 number translation (Tollfree). Enumeration: 'none': 1, 'lnp': 2, 'tollfree': 3.
                 sonusActiveCallOrigCalledNum 1.3.6.1.4.1.2879.2.2.2.1.3.1.13 displaystring read-only
If an address translation has been performed on the called party number, this entry contains the original, untranslated number.
                 sonusActiveCallScenarioType 1.3.6.1.4.1.2879.2.2.2.1.3.1.14 displaystring read-only
Specifies the call scenario type for this call.
                 sonusActiveCallIngressPstnSlotNum 1.3.6.1.4.1.2879.2.2.2.1.3.1.15 integer32 read-only
For calls originating from the PSTN (circuit) side, indicates the slot of the circuit card on which the call was delivered.
                 sonusActiveCallIngressPstnPortNum 1.3.6.1.4.1.2879.2.2.2.1.3.1.16 integer32 read-only
For calls originating from the PSTN (circuit) side, indicates the T1 port on the circuit card on which the call was delivered. For CNS10 cards, the port number will be in the range 1-12; for CNS30 cards, the port number will be in the range 1-28.
                 sonusActiveCallIngressPstnChannelNum 1.3.6.1.4.1.2879.2.2.2.1.3.1.17 integer32 read-only
For calls originating from the PSTN (circuit) side, indicates the DS0 channel on which the call is being carried.
                 sonusActiveCallIngressPstnChannelCount 1.3.6.1.4.1.2879.2.2.2.1.3.1.18 integer32 read-only
For calls originating from the PSTN (circuit) side, indicates the number of DS0 channels on which the call is being carried. This value is meaningful for Nx64 service calls.
                 sonusActiveCallIngressPstnChannelBitMap 1.3.6.1.4.1.2879.2.2.2.1.3.1.19 integer32 read-only
For calls originating from the PSTN (circuit) side, provides a bit map of DS0 channels on which the call is being carried. For Nx64 service calls where N is greater than 1, multiple bits will be marked in the bit map.
                 sonusActiveCallEgressPstnSlotNum 1.3.6.1.4.1.2879.2.2.2.1.3.1.20 integer32 read-only
For calls delivered to the PSTN (circuit) side, indicates the slot of the circuit card on which the call was delivered.
                 sonusActiveCallEgressPstnPortNum 1.3.6.1.4.1.2879.2.2.2.1.3.1.21 integer32 read-only
For calls delivered to the PSTN (circuit) side, indicates the T1 port on the circuit card on which the call was delivered. For CNS10 cards, the port number will be in the range 1-12; for CNS30 cards, the port number will be in the range 1-28.
                 sonusActiveCallEgressPstnChannelNum 1.3.6.1.4.1.2879.2.2.2.1.3.1.22 integer32 read-only
For calls delivered to the PSTN (circuit) side, indicates the DS0 channel on which the call is being carried.
                 sonusActiveCallEgressPstnChannelCount 1.3.6.1.4.1.2879.2.2.2.1.3.1.23 integer32 read-only
For calls delivered to the PSTN (circuit) side, indicates the number of DS0 channels on which the call is being carried. This value is meaningful for Nx64 service calls.
                 sonusActiveCallEgressPstnChannelBitMap 1.3.6.1.4.1.2879.2.2.2.1.3.1.24 integer32 read-only
For calls delivered to the PSTN (circuit) side, provides a bit map of DS0 channels on which the call is being carried. For Nx64 service calls where N is greater than 1, multiple bits will be marked in the bit map.
                 sonusActiveCallIngressLocalIpSockAddr 1.3.6.1.4.1.2879.2.2.2.1.3.1.25 ipaddress read-only
For calls originated on the IP (packet) side, indicates the IP address of the incoming (ingress) local socket connection.
                 sonusActiveCallIngressRemoteIpSockAddr 1.3.6.1.4.1.2879.2.2.2.1.3.1.26 ipaddress read-only
For calls originated on the IP (packet) side, indicates the IP address of the incoming (ingress) remote socket connection.
                 sonusActiveCallEgressLocalIpSockAddr 1.3.6.1.4.1.2879.2.2.2.1.3.1.27 ipaddress read-only
For calls delivered to the IP (packet) side, indicates the IP address of the outgoing (egress) local socket connection.
                 sonusActiveCallEgressRemoteIpSockAddr 1.3.6.1.4.1.2879.2.2.2.1.3.1.28 ipaddress read-only
For calls delivered to the IP (packet) side, indicates the IP address of the outgoing (egress) remote socket connection.
                 sonusActiveCallIngressPstnTrunk 1.3.6.1.4.1.2879.2.2.2.1.3.1.29 displaystring read-only
For calls originating from the PSTN (circuit) side, specifies the trunk group name to which the Ingress Pstn Channel belongs.
                 sonusActiveCallEgressPstnTrunk 1.3.6.1.4.1.2879.2.2.2.1.3.1.30 displaystring read-only
For calls delivered to the PSTN (circuit) side, specifies the trunk group name to which the Egress Pstn Channel belongs.
                 sonusActiveCallIngressIpDestGwName 1.3.6.1.4.1.2879.2.2.2.1.3.1.31 displaystring read-only
For calls originating from the IP (packet) side, specifies the name of the remote gateway on which the call originated.
                 sonusActiveCallEgressIpDestGwName 1.3.6.1.4.1.2879.2.2.2.1.3.1.32 displaystring read-only
For calls delivered to the IP (packet) side, specifies the name of the remote gateway to which the call was delivered.
                 sonusActiveCallDuration 1.3.6.1.4.1.2879.2.2.2.1.3.1.33 integer32 read-only
Indicates the duration in seconds for this call following answer.
                 sonusActiveCallIngressEpType 1.3.6.1.4.1.2879.2.2.2.1.3.1.34 integer read-only
Indicates the end point type for the ingress end point. Enumeration: 'unknown': 0, 'packet': 2, 'circuit': 1.
                 sonusActiveCallEgressEpType 1.3.6.1.4.1.2879.2.2.2.1.3.1.35 integer read-only
Indicates the end point type for the egress end point. Enumeration: 'unknown': 0, 'packet': 2, 'circuit': 1.
                 sonusActiveCallIngressSgType 1.3.6.1.4.1.2879.2.2.2.1.3.1.36 integer read-only
Indicates the signaling type for the ingress end point. Enumeration: 'mg': 8, 'cas': 2, 'unknown': 0, 'internal2': 7, 'h323': 4, 'static': 10, 'isup': 1, 'asg': 9, 'internal1': 6, 'gwip': 5, 'isdn': 3.
                 sonusActiveCallEgressSgType 1.3.6.1.4.1.2879.2.2.2.1.3.1.37 integer read-only
Indicates the signaling type for the egress end point. Enumeration: 'mg': 8, 'cas': 2, 'unknown': 0, 'internal2': 7, 'h323': 4, 'static': 10, 'isup': 1, 'asg': 9, 'internal1': 6, 'gwip': 5, 'isdn': 3.
                 sonusActiveCallPacketsSent 1.3.6.1.4.1.2879.2.2.2.1.3.1.38 integer32 read-only
Indicates the number of RTP packets sent on this call.
                 sonusActiveCallPacketsReceived 1.3.6.1.4.1.2879.2.2.2.1.3.1.39 integer32 read-only
Indicates the number of RTP packets received on this call.
                 sonusActiveCallOctetsSent 1.3.6.1.4.1.2879.2.2.2.1.3.1.40 integer32 read-only
Indicates the number of RTP octets sent on this call.
                 sonusActiveCallOctetsReceived 1.3.6.1.4.1.2879.2.2.2.1.3.1.41 integer32 read-only
Indicates the number of RTP octets received on this call.
                 sonusActiveCallPacketsLost 1.3.6.1.4.1.2879.2.2.2.1.3.1.42 integer32 read-only
Indicates the number of RTP packets lost on this call.
                 sonusActiveCallPacketsDiscarded 1.3.6.1.4.1.2879.2.2.2.1.3.1.43 integer32 read-only
Indicates the number of RTP packets discarded by the jitter buffer.
                 sonusActiveCallInterarrivalJitter 1.3.6.1.4.1.2879.2.2.2.1.3.1.44 integer32 read-only
Indicates the interarrival packet jitter on this call.
                 sonusActiveCallPacketLatency 1.3.6.1.4.1.2879.2.2.2.1.3.1.45 integer32 read-only
Indicates the latency experienced on this call.
         sonusCallResTable 1.3.6.1.4.1.2879.2.2.2.1.4 no-access
This table presents the call resource data for the node. Each active call contains a set of allocated resources. This table provides a brief description and the information required to access detailed information about each allocated resource.
             sonusCallResEntry 1.3.6.1.4.1.2879.2.2.2.1.4.1 no-access
                 sonusCallResShelfIndex 1.3.6.1.4.1.2879.2.2.2.1.4.1.1 integer32 read-only
Identifies the target shelf containing the call to be accessed.
                 sonusCallResSlotIndex 1.3.6.1.4.1.2879.2.2.2.1.4.1.2 integer32 read-only
Identifies the target slot containing the call to be accessed.
                 sonusCallResCallIndex 1.3.6.1.4.1.2879.2.2.2.1.4.1.3 integer32 read-only
Identifies the target call to be accessed.
                 sonusCallResIndex 1.3.6.1.4.1.2879.2.2.2.1.4.1.4 integer32 read-only
Identifies the target resource index to access within the call.
                 sonusCallResId 1.3.6.1.4.1.2879.2.2.2.1.4.1.5 integer32 read-only
Represents the internal resource identifier that uniquely represents the resource to the resource manager entity responsible for the resource.
                 sonusCallResCallId 1.3.6.1.4.1.2879.2.2.2.1.4.1.6 integer32 read-only
Represents the global call identifier (GCID) for the call to which this resource is allocated. This information is provided to ensure that the resource is truly allocated to the call.
                 sonusCallResType 1.3.6.1.4.1.2879.2.2.2.1.4.1.7 integer read-only
Specifies the resource type for this resource. Enumeration: 'dresService': 11, 'bresSw2Atm': 9, 'atmres': 16, 'bresSw2Nif': 1, 'bresSw2DspSonic': 4, 'bresIcm': 0, 'bresSw2DspCtrl': 2, 'bresSw2DspLocal': 3, 'dresPstn': 10, 'xresCntrl': 13, 'bresAtm2Sw': 8, 'aresAmq2Dsp': 15, 'bresDsp2Dsp': 5, 'bresLe2Sonic': 7, 'xresUser': 14, 'bresDsp2Sonic': 6, 'pres': 12, 'bresSw2DspApps': 17.
                 sonusCallResMgrHandle 1.3.6.1.4.1.2879.2.2.2.1.4.1.8 integer32 read-only
Specifies the internal handle for the resource manager entity responsible for this resource. This element is provided for information only.
                 sonusCallResMgrShelfIndex 1.3.6.1.4.1.2879.2.2.2.1.4.1.9 integer32 read-only
Specifies the shelf on which this resource resides.
                 sonusCallResMgrSlotIndex 1.3.6.1.4.1.2879.2.2.2.1.4.1.10 integer32 read-only
Specifies the card slot on which this resource resides.
         sonusCallPegCountsTable 1.3.6.1.4.1.2879.2.2.2.1.5 no-access
This table presents call peg count statistics for the node.
             sonusCallPegCountsEntry 1.3.6.1.4.1.2879.2.2.2.1.5.1 no-access
                 sonusCallPegCountsShelfIndex 1.3.6.1.4.1.2879.2.2.2.1.5.1.1 integer32 read-only
Identifies the target shelf to obtain the call counters.
                 sonusCallPegCountsSlotIndex 1.3.6.1.4.1.2879.2.2.2.1.5.1.2 integer32 read-only
Identifies the target slot.
                 sonusCallPegCountsReset 1.3.6.1.4.1.2879.2.2.2.1.5.1.3 integer read-only
Provides a means to reset the active call attempt and completion counters. Any set operation on this object will result in the attempt and completion counters being cleared. Enumeration: 'reset': 2, 'unknown': 1.
                 sonusCallPegCountsAttempts 1.3.6.1.4.1.2879.2.2.2.1.5.1.4 integer32 read-only
Indicates the number of call attempts on this shelf.
                 sonusCallPegCountsCompletions 1.3.6.1.4.1.2879.2.2.2.1.5.1.5 integer32 read-only
Indicates the total number of completed call attempts on this shelf.
                 sonusCallPegCountsActiveCalls 1.3.6.1.4.1.2879.2.2.2.1.5.1.6 integer32 read-only
Indicates the current number of active calls in the shelf.
                 sonusCallPegCountsStableCalls 1.3.6.1.4.1.2879.2.2.2.1.5.1.7 integer32 read-only
Indicates the current number of stable calls in the shelf.
                 sonusCallPegCountsUpdates 1.3.6.1.4.1.2879.2.2.2.1.5.1.8 integer32 read-only
Indicates the number of call updates (modifications) on this shelf.
                 sonusCallPegCountsActiveCallsNonUser 1.3.6.1.4.1.2879.2.2.2.1.5.1.9 integer32 read-only
Indicates the current number of active non-call associated signalling channels in the shelf. (ie ISDN D channel)
                 sonusCallPegCountsStableCallsNonUser 1.3.6.1.4.1.2879.2.2.2.1.5.1.10 integer32 read-only
Indicates the current number of stable non-call associated signalling channels in the shelf. (ie ISDN D channel)
         sonusToneObjects 1.3.6.1.4.1.2879.2.2.2.1.6
             sonusToneProfile 1.3.6.1.4.1.2879.2.2.2.1.6.1
                 sonusToneProfileNextIndex 1.3.6.1.4.1.2879.2.2.2.1.6.1.1 integer32 read-only
The next valid index to use when creating an entry in the sonusToneProfileTable.
                 sonusToneProfileTable 1.3.6.1.4.1.2879.2.2.2.1.6.1.2 no-access
This table contains tone profiles for the node.
                     sonusToneProfileEntry 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1 no-access
                         sonusToneProfileIndex 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.1 integer32 read-only
Identifies the tone profile entry.
                         sonusToneProfileName 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.2 sonusname read-write
The user name of this tone profile.
                         sonusToneProfileGenerationMethod 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.3 integer read-write
Determines the generation method for the tone. This value is specified at object creation time and cannot be modified. Enumeration: 'dualTone': 2, 'modulatedTone': 3, 'singleTone': 1.
                         sonusToneProfileTone1Freq 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.4 integer32 read-write
Specifies Tone 1 Frequency in Hertz. If 0, then silence is generated. Only valid if generation method is singleTone or dualTone.
                         sonusToneProfileTone1Power 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.5 integer32 read-write
Specifies Tone 1 Power in dBm. Power levels range from -50 dBm (minimum power) to +3 dBm (maximum power). Only valid if generation method is singleTone or dualTone.
                         sonusToneProfileTone2Freq 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.6 integer32 read-write
Specifies Tone 2 Frequency in Hertz. If 0, then a single frequency tone is generated. Only valid if generation method is dualTone.
                         sonusToneProfileTone2Power 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.7 integer32 read-write
Specifies Tone 2 Power in dBm. Power levels range from -50 dBm (minimum power) to +3 dBm (maximum power). Only valid if generation method is dualTone.
                         sonusToneProfileCarrierFreq 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.8 integer32 read-write
Specifies the frequency in Hertz of the carrier for the modulated signal. Value must be less than 4000. If set to 0, then silence is generated. Only valid if generation method is modulatedTone.
                         sonusToneProfileSignalFreq 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.9 integer32 read-write
Specifies the frequency in Hertz of the sinusoid modulating the carrier sinusoid. Value must be less than 4000. Only valid if generation method is modulatedTone.
                         sonusToneProfileModPower 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.10 integer32 read-write
Specifies Carrier Power in dBm. Power levels range from -50 dBm (minimum power) to +3 dBm (maximum power). Only valid if generation method is modulatedTone.
                         sonusToneProfileModIndex 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.11 integer32 read-write
Specifies the modulation index of the signal. Value must be in the range of 0 to 300 in 1% units. Only valid if generation method is modulatedTone.
                         sonusToneProfileMake1 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.12 integer32 read-write
Duration of the first on cadence in milliseconds. If 0, then the duration of the first on cadence is 0 msec. If -1, then the tone is played continuously.
                         sonusToneProfileBreak1 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.13 integer32 read-write
Duration of the first off cadence in milliseconds. If 0, then silence is not generated between the on cadences. If -1, then silence is generated continuously.
                         sonusToneProfileMake2 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.14 integer32 read-write
Duration of the second on cadence in milliseconds. If 0, then the duration of the second on cadence is 0 msec. If -1, then the tone is played continuously.
                         sonusToneProfileBreak2 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.15 integer32 read-write
Duration of the second off cadence in milliseconds. If 0, then silence is not generated between the on cadences. If -1, then silence is generated continuously.
                         sonusToneProfileMake3 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.16 integer32 read-write
Duration of the thrid on cadence in milliseconds. If 0, then the duration of the third on cadence is 0 msec. If -1, then the tone is played continuously.
                         sonusToneProfileBreak3 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.17 integer32 read-write
Duration of the third off cadence in milliseconds. If 0, then silence is not generated after the third on cadence. If -1, then silence is generated continuously.
                         sonusToneProfileRepeat 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.18 integer32 read-write
Number of cadence cycles to generate. If 0, then the tone pattern is repeated indefinitely.
                         sonusToneProfileRowStatus 1.3.6.1.4.1.2879.2.2.2.1.6.1.2.1.19 rowstatus read-write
             sonusToneType 1.3.6.1.4.1.2879.2.2.2.1.6.2
                 sonusToneTypeNextIndex 1.3.6.1.4.1.2879.2.2.2.1.6.2.1 integer32 read-only
The next valid index to use when creating an entry in the sonusToneTypeTable.
                 sonusToneTypeTable 1.3.6.1.4.1.2879.2.2.2.1.6.2.2 no-access
This table contains tone types for the node.
                     sonusToneTypeEntry 1.3.6.1.4.1.2879.2.2.2.1.6.2.2.1 no-access
                         sonusToneTypeIndex 1.3.6.1.4.1.2879.2.2.2.1.6.2.2.1.1 integer32 read-only
Identifies the tone type entry.
                         sonusToneTypeName 1.3.6.1.4.1.2879.2.2.2.1.6.2.2.1.2 sonusname read-write
The user name of this tone type. Possible types include 'dial', 'busy', 'reorder', etc.
                         sonusToneTypeRowStatus 1.3.6.1.4.1.2879.2.2.2.1.6.2.2.1.3 rowstatus read-write
             sonusTonePackage 1.3.6.1.4.1.2879.2.2.2.1.6.3
                 sonusTonePackageNextIndex 1.3.6.1.4.1.2879.2.2.2.1.6.3.1 integer32 read-only
The next valid index to use when creating an entry in the sonusTonePackageTable.
                 sonusTonePackageTable 1.3.6.1.4.1.2879.2.2.2.1.6.3.2 no-access
This table contains tone packages for the node.
                     sonusTonePackageEntry 1.3.6.1.4.1.2879.2.2.2.1.6.3.2.1 no-access
                         sonusTonePackageIndex 1.3.6.1.4.1.2879.2.2.2.1.6.3.2.1.1 integer32 read-only
Identifies the tone package.
                         sonusTonePackageName 1.3.6.1.4.1.2879.2.2.2.1.6.3.2.1.2 sonusname read-write
The name of this tone package. This name should reflect the country or carrier which will be using this package.
                         sonusTonePackageRowStatus 1.3.6.1.4.1.2879.2.2.2.1.6.3.2.1.3 rowstatus read-write
             sonusTonePkgElem 1.3.6.1.4.1.2879.2.2.2.1.6.4
                 sonusTonePkgElemTable 1.3.6.1.4.1.2879.2.2.2.1.6.4.1 no-access
This table contains elements which bind tone types to tone profiles for a given tone package.
                     sonusTonePkgElemEntry 1.3.6.1.4.1.2879.2.2.2.1.6.4.1.1 no-access
                         sonusTonePkgElemIndex 1.3.6.1.4.1.2879.2.2.2.1.6.4.1.1.1 integer32 read-only
Identifies the target tone package element.
                         sonusTonePkgElemTonePackageRef 1.3.6.1.4.1.2879.2.2.2.1.6.4.1.1.2 sonusnamereference read-write
Identifies the tone packge for this element.
                         sonusTonePkgElemToneTypeRef 1.3.6.1.4.1.2879.2.2.2.1.6.4.1.1.3 sonusnamereference read-write
Identifies the tone type for this element.
                         sonusTonePkgElemToneProfileRef 1.3.6.1.4.1.2879.2.2.2.1.6.4.1.1.4 sonusnamereference read-write
The name of the tone profile that this tone type maps to for this tone package.
                         sonusTonePkgElemRowStatus 1.3.6.1.4.1.2879.2.2.2.1.6.4.1.1.5 rowstatus read-write
         sonusDigitProfile 1.3.6.1.4.1.2879.2.2.2.1.7
             sonusDigitProfileNextIndex 1.3.6.1.4.1.2879.2.2.2.1.7.1 integer32 read-only
The next valid index to use when creating an entry in the sonusDigitProfileTable.
             sonusDigitProfileTable 1.3.6.1.4.1.2879.2.2.2.1.7.2 no-access
This table contains digit profiles for the node. Digit Profiles contain both digit generation (sonusDigitProfileGen...) and digit detection (sonusDigitProfileDet...) parameters.
                 sonusDigitProfileEntry 1.3.6.1.4.1.2879.2.2.2.1.7.2.1 no-access
                     sonusDigitProfileIndex 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.1 integer32 read-only
Identifies the digit profile entry.
                     sonusDigitProfileName 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.2 sonusname read-write
The user name of this digit profile.
                     sonusDigitProfileType 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.3 integer read-write
Specifies the digit's format. This value is set at object creation time and cannot be modified. Enumeration: 'mfr2f': 3, 'mfr2b': 4, 'dtmf': 1, 'mfr1': 2.
                     sonusDigitProfileGenPower 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.4 integer32 read-write
Specifies digit generation power level in dBm. Power level ranges from -50 dBm (minimum power) to +3 dBm (maximum power).
                     sonusDigitProfileGenMake 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.5 integer32 read-write
Specifies duration of generated digits in milliseconds.
                     sonusDigitProfileGenBreak 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.6 integer32 read-write
Specifies silence between generated digits in milliseconds.
                     sonusDigitProfileDetMinPower 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.7 integer32 read-write
Specifies minimum power level in dBm required for digit detection. Valid levels range from -45dBm to -25dBm.
                     sonusDigitProfileDetMinOnDuration 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.8 integer32 read-write
Specifies minimum tone duration in milliseconds required for digit detection. The value must in increments of 5ms. For DTMF digits, the value must be between 25ms and 80ms. For MF digits, the value must be between 25ms and 100ms.
                     sonusDigitProfileDetMinOffDuration 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.9 integer32 read-write
Specifies minimum interdigit duration in milliseconds for digit detection. The value must be in increments of 5ms. For DTMF digits, the value must be between 25ms and 80ms. For MF digits, the value must be between 10ms and 100ms.
                     sonusDigitProfileDetFreqAcceptRange 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.10 integer read-write
Specifies frequency tolerances for digit detection. For DTMF digits the value represents accept and reject ranges. For MF digits the value represents only the accept range. Frequencies detected within the accept range will result in digit detection. Frequencies detected outside the reject range will not result in digit detection. . DTMF DTMF MFR1 VALUE ENUMERATION ACCEPT REJECT ACCEPT ----- ----------- ---------------- ------------------ 1 narrow +/-2.0% +/-3.0% +/-(1.5% + 5Hz) 2 medium +/-2.5% +/-3.5% +/-(1.5% + 10Hz) 3 wide +/-3.0% +/-4.0% +/-(1.5% + 15Hz) 4 wider +/-3.5% +/-4.5% N/A Enumeration: 'wider': 4, 'wide': 3, 'medium': 2, 'narrow': 1.
                     sonusDigitProfileDtmfDetTwistCutoff 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.11 integer32 read-write
For DTMF digit detection only. Twist is the ratio of high group power to low. Twist ratios below the twist cutoff will result in digit detection. Twist ratios above the twist cutoff will result in digit rejection. Value must be between 4dB and 12dB in increments of 2dB.
                     sonusDigitProfileMfr1GenMakeKp 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.12 integer32 read-write
Specifies duration of generated KP digit in milliseconds. Only applicable if digit type is MFR1.
                     sonusDigitProfileRowStatus 1.3.6.1.4.1.2879.2.2.2.1.7.2.1.13 rowstatus read-write
         sonusStaticCall 1.3.6.1.4.1.2879.2.2.2.1.8
             sonusStaticCallNextIndex 1.3.6.1.4.1.2879.2.2.2.1.8.1 integer32 read-only
The next valid index to use when creating an entry in the sonusStaticCallAdmnTable
             sonusStaticCallAdmnTable 1.3.6.1.4.1.2879.2.2.2.1.8.2 no-access
This table specifies the static call list for the node.
                 sonusStaticCallAdmnEntry 1.3.6.1.4.1.2879.2.2.2.1.8.2.1 no-access
                     sonusStaticCallAdmnIndex 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.1 integer32 read-only
Identifies the target static call entry.
                     sonusStaticCallAdmnState 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.2 integer read-write
The administrative state of this static call entry. Enumeration: 'disabled': 1, 'enabled': 2.
                     sonusStaticCallAdmnName 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.3 sonusname read-write
The user name of this static call.
                     sonusStaticCallAdmnEndPointAShelf 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.4 integer32 read-write
A 32-bit integer identifying the shelf of the end point A
                     sonusStaticCallAdmnEndPointASlot 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.5 integer32 read-write
A 32-bit integer identifying the slot of the end point A
                     sonusStaticCallAdmnEndPointAPort 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.6 integer32 read-write
Port index of end point A.
                     sonusStaticCallAdmnEndPointAChannel 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.7 integer32 read-write
Indicates the DS0 channel of the end point A
                     sonusStaticCallAdmnEndPointAServProfile 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.8 sonusname read-write
The service profile used for end point A
                     sonusStaticCallAdmnEndPointBType 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.9 integer read-write
The type of end point B (circuit or packet). Enumeration: 'packet': 2, 'circuit': 1.
                     sonusStaticCallAdmnEndPointBShelf 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.10 integer32 read-write
A 32-bit integer identifying the shelf of the end point B
                     sonusStaticCallAdmnEndPointBSlot 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.11 integer32 read-write
A 32-bit integer identifying the slot of the end point B
                     sonusStaticCallAdmnEndPointBPort 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.12 integer32 read-write
Port index of end point B.
                     sonusStaticCallAdmnEndPointBChannel 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.13 integer32 read-write
Indicates the DS0 channel of the end point B
                     sonusStaticCallAdmnEndPointBLocalRTPPort 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.14 integer32 read-write
Indicates the local RTP port.
                     sonusStaticCallAdmnEndPointBLocalIpAddress 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.15 ipaddress read-write
The IP Address of the end point B if it is packet
                     sonusStaticCallAdmnEndPointBRemoteRTPPort 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.16 integer32 read-write
Indicates the remote RTP port.
                     sonusStaticCallAdmnEndPointBRemoteIpAddress 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.17 ipaddress read-write
The IP Address of the end point B if it is packet
                     sonusStaticCallAdmnEndPointBServProfile 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.18 sonusname read-write
The service profile used for end point B
                     sonusStaticCallAdmnCircuitMode 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.19 integer read-write
The circuit mode for this static call Enumeration: 'voice': 1, 'data': 2.
                     sonusStaticCallAdmnRowStatus 1.3.6.1.4.1.2879.2.2.2.1.8.2.1.20 rowstatus read-write
         sonusStaticCallStatTable 1.3.6.1.4.1.2879.2.2.2.1.9 no-access
The Manual Call Stat Table
             sonusStaticCallStatEntry 1.3.6.1.4.1.2879.2.2.2.1.9.1 no-access
An entry in the Manual Call Stat Table
                 sonusStaticCallStatIndex 1.3.6.1.4.1.2879.2.2.2.1.9.1.1 integer32 read-only
The index for target static call.
                 sonusStaticCallStatCallId 1.3.6.1.4.1.2879.2.2.2.1.9.1.2 integer32 read-only
The call identifier(GCID) assigned to this static call
                 sonusStaticCallStatState 1.3.6.1.4.1.2879.2.2.2.1.9.1.3 displaystring read-only
The status of the static call
                 sonusStaticCallStatTime 1.3.6.1.4.1.2879.2.2.2.1.9.1.4 displaystring read-only
Displays the Date/time the connection was created
         sonusStaticCallActionObjects 1.3.6.1.4.1.2879.2.2.2.1.10
               sonusStaticCallGcid 1.3.6.1.4.1.2879.2.2.2.1.10.1 integer32 read-write
The call identifier for a call to be deleted
               sonusStaticCallAction 1.3.6.1.4.1.2879.2.2.2.1.10.2 integer read-write
The action that should be taken on the call Enumeration: 'none': 1, 'delete': 2.
         sonusCallTrace 1.3.6.1.4.1.2879.2.2.2.1.11
               sonusCallTraceNextIndex 1.3.6.1.4.1.2879.2.2.2.1.11.1 integer32 read-only
The next valid index to use when creating an entry in the sonusCallTraceTable.
               sonusCallTraceTable 1.3.6.1.4.1.2879.2.2.2.1.11.2 no-access
This table specifies the Call Trace Table
                   sonusCallTraceEntry 1.3.6.1.4.1.2879.2.2.2.1.11.2.1 no-access
                       sonusCallTraceIndex 1.3.6.1.4.1.2879.2.2.2.1.11.2.1.1 integer32 read-only
The index of this Call Trace entry.
                       sonusCallTraceState 1.3.6.1.4.1.2879.2.2.2.1.11.2.1.2 integer read-write
The administrative state of this Call Trace entry. Enumeration: 'disabled': 1, 'enabled': 2.
                       sonusCallTraceName 1.3.6.1.4.1.2879.2.2.2.1.11.2.1.3 sonusname read-write
The name of this Call Trace entry.
                       sonusCallTraceType 1.3.6.1.4.1.2879.2.2.2.1.11.2.1.4 integer read-write
The trace type of this Call Trace entry. Enumeration: 'calledonly': 2, 'calledcalling': 1, 'callingonly': 3.
                       sonusCallTraceCalledNumber 1.3.6.1.4.1.2879.2.2.2.1.11.2.1.5 displaystring read-write
The called number being traced.
                       sonusCallTraceCallingNumber 1.3.6.1.4.1.2879.2.2.2.1.11.2.1.6 displaystring read-write
The calling number being traced.
                       sonusCallTraceLevel 1.3.6.1.4.1.2879.2.2.2.1.11.2.1.7 integer read-write
The trace level of this call trace entry, currently only one level is supported. Enumeration: 'level1': 1, 'level2': 2, 'level3': 3.
                       sonusCallTraceRowStatus 1.3.6.1.4.1.2879.2.2.2.1.11.2.1.8 rowstatus read-write
         sonusCktServProfile 1.3.6.1.4.1.2879.2.2.2.1.12
               sonusCktServProfileNextIndex 1.3.6.1.4.1.2879.2.2.2.1.12.1 integer32 read-only
The next valid index to use when creating an entry in the sonusCktServProfileTable.
               sonusCktServProfileTable 1.3.6.1.4.1.2879.2.2.2.1.12.2 no-access
This table specifies the Circuit service profile list for the node.
                   sonusCktServProfileEntry 1.3.6.1.4.1.2879.2.2.2.1.12.2.1 no-access
                       sonusCktServProfileIndex 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.1 integer32 read-only
Identifies the target circuit service profile entry.
                       sonusCktServProfileState 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.2 integer read-write
The administrative state of this circuit service profile entry. Enumeration: 'disabled': 1, 'enabled': 2.
                       sonusCktServProfileName 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.3 sonusname read-write
The name of this circuit service profile.
                       sonusCktServProfileAudioEncoding 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.4 integer read-write
The audio encoding method to be performed on the voice data received from, and destined to the PSTN. The default encoding method is G.711 Ulaw. Enumeration: 'g711ulaw': 1, 'g711alaw': 2.
                       sonusCktServProfileBandwidth 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.5 integer32 read-write
The number of DS0 channels to group for Nx64 connections. Valid entries are 1 to 24 channels, allowing up to a complete set of T1 channels to be grouped at a single connection. The default bandwidth is 1 channel.
                       sonusCktServProfileNecEnable 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.6 integer read-write
Specifies whether Network Echo Cancellation (NEC) is enabled for the channel. When enabled, NEC is enabled acording to the appropriate NEC configuration parameters. When disabled, the echo chaceller is bypassed. Enumeration: 'disabled': 1, 'enabled': 2.
                       sonusCktServProfileCttTestType 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.7 integer read-write
For ISUP service profiles, specifies the type of continuity test to perform, based on the configuration of the remote switch or trunk connection. The remoteLoopback test is used when the remote switch will loop back channel being tested. The remote2Wire test is used when the remote switch supports the 2 wire continuity test procedure. And the remote4Wire test mode is used when the remote switch supports the 4 wire continuity test procedure. The default value is remoteLoopback. Enumeration: 'remote2Wire': 2, 'remote4Wire': 3, 'remoteLoopback': 1.
                       sonusCktServProfileCttTimeout 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.8 integer32 read-write
For ISUP service profiles, specifies the overall test timeout value. The continuity test will be declared failed if the continuity tone is not detected within this timeout period. The timeout is specified in seconds, with a default value of 2 seconds.
                       sonusCktServProfileCttMinDetectTime 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.9 integer32 read-write
For ISUP service profiles, specifies the minimum time to detect the presence of the continuity test tone. The minimum detect time is specified in milliseconds, with a default time of 45 ms.
                       sonusCktServProfileCttMinReleaseTime 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.10 integer32 read-write
For ISUP service profiles, specifies the minimum time to detect that the continuity test tone has been removed and is no longer present. The minimum release time is specified in milliseconds, with a default time of 25 ms.
                       sonusCktServProfileCapability 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.11 integer read-write
Specifies the data capabilities for the circuit. This parameter specifies whether voice only, circuit mode data only, or both voice and circuit mode data can be supported by the circuit. Enumeration: 'voiceOrCircuitModeData': 3, 'circuitModeData': 2, 'voiceOnly': 1.
                       sonusCktServProfileDataRestrictedCfg 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.12 integer read-write
Specifies whether the circuit may support 64 Kbit/s unrestricted data, or if the circuit supports 56 Kbit/s restricted data. Enumeration: 'restricted': 2, 'unrestricted': 1.
                       sonusCktServProfileDtmfProfileName 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.13 sonusnamereference read-write
The name of DTMF profile associated with this circuit service profile.
                       sonusCktServProfileRowStatus 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.14 rowstatus read-write
                       sonusCktServProfileInterworkingXfrCap 1.3.6.1.4.1.2879.2.2.2.1.12.2.1.15 integer read-write
The transfer capability for audio calls when interworking with CAS. The default transfer capability is speech. Enumeration: 'speech': 1, 'audio31Khz': 2.
         sonusPktServProfile 1.3.6.1.4.1.2879.2.2.2.1.13
               sonusPktServProfileNextIndex 1.3.6.1.4.1.2879.2.2.2.1.13.1 integer32 read-only
The next valid index to use when creating an entry in the sonusPktServProfileTable.
               sonusPktServProfileTable 1.3.6.1.4.1.2879.2.2.2.1.13.2 no-access
This table specifies the packet service profile list for the node.
                   sonusPktServProfileEntry 1.3.6.1.4.1.2879.2.2.2.1.13.2.1 no-access
                       sonusPktServProfileIndex 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.1 integer32 read-only
Identifies the target packet service profile entry.
                       sonusPktServProfileState 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.2 integer read-write
The administrative state of this packet service profile entry. Enumeration: 'disabled': 1, 'enabled': 2.
                       sonusPktServProfileName 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.3 sonusname read-write
The user name of this packet service profile.
                       sonusPktServProfileDestProtocol 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.4 integer read-write
Specifies the Packet Destination Protocal used. GSX - uses Sonus GSX-GSX MCS protocol. h323 - uses H.323 protocol. Enumeration: 'gsx': 1, 'h323': 2.
                       sonusPktServProfilePrfdAudioEncoding 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.5 integer read-write
The preferred audio encoding method to be performed on the packet data received from, and destined to the IP network. The possible options are: G.711, G.711 with Silence Suppression, G.729A and G.729A+B. The default encoding method is G.711. For G.711, the law is determined by Circuit Service Profile. Enumeration: 'g711': 1, 'g711ss': 2, 'g729a': 4, 'g729ab': 5.
                       sonusPktServProfilePrfdFramesPerPacket 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.6 integer32 read-write
Specifies the Preferred Audio Encoding Packet Size in milliseconds. For G.711 encoding mode, valid values range from 10 ms to 40 ms, in increments of 5 ms. The default value for G.711 is 10 ms. For G.729 encoding mode, valid values from 10 ms to 40 ms, in increments of 10 ms. The default value for G.729 is 20 ms.
                       sonusPktServProfileDefFramesPerPacket 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.7 integer32 read-write
Specifies the default Audio Encoding Packet Size in milliseconds. For G.711 encoding mode, valid values range from 10 ms to 40 ms, in increments of 5 ms. The default value for G.711 is 10 ms. For G.729 encoding mode, valid values from 10 ms to 40 ms, in increments of 10 ms. The default value for G.729 is 20 ms.
                       sonusPktServProfileDefAudioEnable 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.8 integer read-write
Specifies whether or not to allow default Audio (G.711). If enabled, allow use of G.711 if preferred audio resource is not available. If disabled, Do not use of G.711 if preferred audio resource is not available and the call is disconnected. Enumeration: 'disabled': 1, 'enabled': 2.
                       sonusPktServProfileSilenceFactor 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.9 integer32 read-write
Specifies percentage of call time that silence is expected.
                       sonusPktServProfileVInitPlayoutBufDelay 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.10 integer32 read-write
This value defines the size of the initial playout bufferrequired to absorb the maximum expected voice packet delay across the network. Range from 1 ms to 50 ms, in increments of 1 ms.
                       sonusPktServProfileFaxRelay 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.11 integer read-write
If never is specified, Fax Relay is not used regardless of the audio encoding method. If useIfCompressedAudio is specified, Fax Relay is used if the compressed resource is available. If always is specified, Fax Relay is used regardless of the audio encoding method. Enumeration: 'always': 2, 'never': 0, 'useIfCompressedAudio': 1.
                       sonusPktServProfileDtmfRelay 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.12 integer read-write
If never is specified, DTMF Relay is not used regardless of the audio encoding method. If useIfCompressedAudio is specified, DTMF Relay is used if the compressed resource is available. If always is specified, DTMF Relay is used regardless of the audio encoding method. Enumeration: 'always': 2, 'never': 0, 'useIfCompressedAudio': 1.
                       sonusPktServProfileFallbackHandling 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.13 integer read-write
This specifies the behavior when a compressed codec call needs to revert to G.711 (e.g., to pass modem data) and there is no bandwidth available. Enumeration: 'disconnet': 1, 'continue': 2.
                       sonusPktServProfileTosValue 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.14 integer32 read-write
Specifies the Type Of Service (TOS) parameters to be provided in the IP header for voice packets. The TOS value is specified as an 8-bit hex value 0x00-0xFF allowing complete flexibility with respect to the contents of the TOS byte.
                       sonusPktServProfileDInitPlayoutBufDelay 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.15 integer32 read-write
This value defines the size of the initial playout buffer required to absorb the maximum expected data packet delay across the network. Range from 5 ms to 50 ms, in increments of 1 ms. The default value is 50 ms.
                       sonusPktServProfileDataRtpPayloadType 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.16 integer32 read-write
Specifies the RTP payload type to be included in the RTP header of the data packet
                       sonusPktServProfileRowStatus 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.17 rowstatus read-write
                       sonusPktServProfileG711SendSidPackets 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.18 integer read-write
Specifies whether sending SID packets is enabled. This applies only if preferred audio encoding is G.711 with silence suppression. Enumeration: 'disabled': 1, 'enabled': 2.
                       sonusPktServProfileG711SidRtpPayloadType 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.19 integer32 read-write
Specifies G.711 SID RTP payload type. This applies only if preferred audio encoding is G.711 with silence suppression. Range 0 to 127.
                       sonusPktServProfileSidHeartbeat 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.20 integer read-write
Specifies whether sending SID heartbeat packets is enabled. This applies if preferred audio encoding is either G.711 with silence suppression or G.729A+B. Enumeration: 'disabled': 1, 'enabled': 2.
                       sonusPktServProfileRtcp 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.21 integer read-write
Specifies whether RTCP is enabled for the call. Enumeration: 'disabled': 1, 'enabled': 2.
                       sonusPktServProfilePacketLossThreshold 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.22 integer32 read-write
Specifies the RTCP packet loss threshold in packets/100,000. 0 means no detection. Requires RTCP to be enabled.
                       sonusPktServProfilePacketLossAction 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.23 integer read-write
Specifies the action taken when the packet loss threshold is exceeded. Requires RTCP to be enabled. Enumeration: 'none': 0, 'trapAndDisconnect': 3, 'trap': 1.
                       sonusPktServProfileRtpPeerAbsenceAction 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.24 integer read-write
Specifies the action taken when the RTP peer is detected to be absent (due to lack of RTP and RTCP packets). Requires RTCP to be enabled. Enumeration: 'none': 0, 'trapAndDisconnect': 3, 'trap': 1.
                       sonusPktServProfileDtmfRelayOutOfBand 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.25 integer read-write
Specifies whether out of band DTMF relay is enabled. This applies if DTMF relay is configured as useIfCompressedAudio or always . Enumeration: 'disabled': 1, 'enabled': 2.
                       sonusPktServProfileDtmfRelayRemoveDigits 1.3.6.1.4.1.2879.2.2.2.1.13.2.1.26 integer read-write
Specifies whether removing DTMF digits from the media stream is enabled. This applies if DTMF relay is configured as useIfCompressedAudio or always . Enumeration: 'disabled': 1, 'enabled': 2.
         sonusDisconnectTreatmentObjects 1.3.6.1.4.1.2879.2.2.2.1.14
               sonusDiscTreatProfile 1.3.6.1.4.1.2879.2.2.2.1.14.1
                   sonusDiscTreatProfileNextIndex 1.3.6.1.4.1.2879.2.2.2.1.14.1.1 integer32 read-only
The next valid index to use when creating an entry in the sonusDiscTreatProfileTable.
                   sonusDiscTreatProfileTable 1.3.6.1.4.1.2879.2.2.2.1.14.1.2 no-access
This table contains Disconnect Treatment Profiles for the node.
                       sonusDiscTreatProfileEntry 1.3.6.1.4.1.2879.2.2.2.1.14.1.2.1 no-access
                           sonusDiscTreatProfileIndex 1.3.6.1.4.1.2879.2.2.2.1.14.1.2.1.1 integer32 no-access
Identifies the Disconnect Treatment Profile.
                           sonusDiscTreatProfileName 1.3.6.1.4.1.2879.2.2.2.1.14.1.2.1.2 sonusname read-write
The user name of this Disconnect Treatment Profile.
                           sonusDiscTreatProfileRowStatus 1.3.6.1.4.1.2879.2.2.2.1.14.1.2.1.3 rowstatus read-write
               sonusDiscTreatmentAdmnTable 1.3.6.1.4.1.2879.2.2.2.1.14.2 no-access
                   sonusDiscTreatmentAdmnEntry 1.3.6.1.4.1.2879.2.2.2.1.14.2.1 no-access
                       sonusDiscTreatmentProfileIndex 1.3.6.1.4.1.2879.2.2.2.1.14.2.1.1 integer32 no-access
Identifies the Disconnect Treatment Profile to which this entry belongs.
                       sonusDiscTreatmentIndex 1.3.6.1.4.1.2879.2.2.2.1.14.2.1.2 integer32 no-access
Identifies the target Disconnect Treatment entry.
                       sonusDiscTreatmentReason 1.3.6.1.4.1.2879.2.2.2.1.14.2.1.3 integer32 read-only
Disconnect Reason Code.
                       sonusDiscTreatmentSigSeqProfileName 1.3.6.1.4.1.2879.2.2.2.1.14.2.1.4 sonusnamereference read-write
For given Disconnect Treatment Profile and Disconnect Reason Code, execute this Disconnect SSP.
                       sonusDiscTreatmentRowStatus 1.3.6.1.4.1.2879.2.2.2.1.14.2.1.5 rowstatus read-write
               sonusDiscSspGroupAdmn 1.3.6.1.4.1.2879.2.2.2.1.14.3
                   sonusDiscSspNextIndex 1.3.6.1.4.1.2879.2.2.2.1.14.3.1 integer32 read-only
The next valid index to use when creating a new sonusDiscSspGroupAdmnEntry
                   sonusDiscSspAdmnTable 1.3.6.1.4.1.2879.2.2.2.1.14.3.2 no-access
                       sonusDiscSspAdmnEntry 1.3.6.1.4.1.2879.2.2.2.1.14.3.2.1 no-access
                           sonusDiscSigSeqProfileIndex 1.3.6.1.4.1.2879.2.2.2.1.14.3.2.1.1 integer32 no-access
Identifies the target Disconnect Signal Sequence Profile.
                           sonusDiscSigSeqProfileName 1.3.6.1.4.1.2879.2.2.2.1.14.3.2.1.2 sonusname read-write
The user name of this Disconnect Signal Sequence Profile.
                           sonusDiscSigSeqProfileRowStatus 1.3.6.1.4.1.2879.2.2.2.1.14.3.2.1.3 rowstatus read-write
               sonusDiscSigSeqAdmnTable 1.3.6.1.4.1.2879.2.2.2.1.14.4 no-access
                   sonusDiscSigSeqAdmnEntry 1.3.6.1.4.1.2879.2.2.2.1.14.4.1 no-access
                       sonusDiscSigSequenceProfileIndex 1.3.6.1.4.1.2879.2.2.2.1.14.4.1.1 integer32 no-access
                       sonusDiscSigSequenceIndex 1.3.6.1.4.1.2879.2.2.2.1.14.4.1.2 integer32 no-access
                       sonusDiscSigSequencePosition 1.3.6.1.4.1.2879.2.2.2.1.14.4.1.3 integer32 read-write
                       sonusDiscSigSequenceToken 1.3.6.1.4.1.2879.2.2.2.1.14.4.1.4 integer read-write
Enumeration: 'delay': 9, 'clear': 16, 'playAnn': 8, 'playTone': 7, 'exec': 17.
                       sonusDiscSigSequenceParam1 1.3.6.1.4.1.2879.2.2.2.1.14.4.1.5 displaystring read-write
                       sonusDiscSigSequenceParam2 1.3.6.1.4.1.2879.2.2.2.1.14.4.1.6 displaystring read-write
                       sonusDiscSigSequenceAdminState 1.3.6.1.4.1.2879.2.2.2.1.14.4.1.7 sonusadminstate read-write
                       sonusDiscSigSequenceRowStatus 1.3.6.1.4.1.2879.2.2.2.1.14.4.1.8 rowstatus read-write
         sonusTestCall 1.3.6.1.4.1.2879.2.2.2.1.15
               sonusTestCallNextIndex 1.3.6.1.4.1.2879.2.2.2.1.15.1 integer32 read-only
The next valid index to use when creating an entry in the sonusTestCallAdmnTable
               sonusTestCallAdmnTable 1.3.6.1.4.1.2879.2.2.2.1.15.2 no-access
This table specifies the test call list for the node.
                   sonusTestCallAdmnEntry 1.3.6.1.4.1.2879.2.2.2.1.15.2.1 no-access
                       sonusTestCallAdmnIndex 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.1 integer32 read-only
Identifies the target test call entry.
                       sonusTestCallAdmnState 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.2 integer read-write
The administrative state of this test call entry. Enumeration: 'disabled': 0, 'enabled': 1.
                       sonusTestCallAdmnName 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.3 sonusname read-write
The user name of this test call.
                       sonusTestCallAdmnEndPointShelf 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.4 integer32 read-write
A 32-bit integer identifying the shelf of the end point
                       sonusTestCallAdmnEndPointSlot 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.5 integer32 read-write
A 32-bit integer identifying the slot of the end point
                       sonusTestCallAdmnEndPointPort 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.6 integer32 read-write
Port index of end point.
                       sonusTestCallAdmnEndPointChannel 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.7 integer32 read-write
Indicates the DS0 channel of the end point.
                       sonusTestCallAdmnRowStatus 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.8 rowstatus read-write
                       sonusTestCallAdmnType 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.9 integer read-write
The circuit type for this test call. Enumeration: 'play': 1, 'listen': 0.
                       sonusTestCallAdmnPower 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.10 integer32 read-write
The power in dBm of the tone to play.
                       sonusTestCallAdmnFrequency 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.11 integer32 read-write
The frequency in Hz of the tone to play or listen for.
                       sonusTestCallAdmnStatPower 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.12 integer32 read-write
The dBm of the tone received in LISTEN mode.
                       sonusTestCallAdmnStatPowerTenths 1.3.6.1.4.1.2879.2.2.2.1.15.2.1.13 integer32 read-write
The tenths of dBm of the tone received in LISTEN mode.
         sonusTestCallStatTable 1.3.6.1.4.1.2879.2.2.2.1.16 no-access
The Manual Call Stat Table
               sonusTestCallStatEntry 1.3.6.1.4.1.2879.2.2.2.1.16.1 no-access
An entry in the Manual Call Stat Table
                   sonusTestCallStatIndex 1.3.6.1.4.1.2879.2.2.2.1.16.1.1 integer32 read-only
The index for target test call.
                   sonusTestCallStatCallId 1.3.6.1.4.1.2879.2.2.2.1.16.1.2 integer32 read-only
The call identifier(GCID) assigned to this test call
                   sonusTestCallStatState 1.3.6.1.4.1.2879.2.2.2.1.16.1.3 displaystring read-only
The status of the test call
                   sonusTestCallStatTime 1.3.6.1.4.1.2879.2.2.2.1.16.1.4 displaystring read-only
Displays the Date/time the connection was created
         sonusTestCallActionObjects 1.3.6.1.4.1.2879.2.2.2.1.17
               sonusTestCallGcid 1.3.6.1.4.1.2879.2.2.2.1.17.1 integer32 read-write
The call identifier for a call to be deleted
               sonusTestCallAction 1.3.6.1.4.1.2879.2.2.2.1.17.2 integer read-write
The action that should be taken on the call Enumeration: 'none': 1, 'delete': 2.
     sonusNodeResourcesMIBNotifications 1.3.6.1.4.1.2879.2.2.2.2
         sonusNodeResourcesMIBNotificationsPrefix 1.3.6.1.4.1.2879.2.2.2.2.0
             sonusNodeResourcesCallAdmissionSuspendedNotification 1.3.6.1.4.1.2879.2.2.2.2.0.1
This trap indicates that call admission into the GSX has been suspended. Information provided by this trap includes the reason why call admission has been suspended.
             sonusNodeResourcesCallAdmissionEnabledNotification 1.3.6.1.4.1.2879.2.2.2.2.0.2
This trap indicates that call admission into the GSX has been enabled. Information provided by this trap includes the reason why call admission has been enabled.
             sonusNodeResourcesCallTraceHitNotification 1.3.6.1.4.1.2879.2.2.2.2.0.3
This trap indicates that call trace filter had a hit. Information provided by this trap includes the called number and the calling number.
         sonusNodeResourcesMIBNotificationsObjects 1.3.6.1.4.1.2879.2.2.2.2.1
             sonusCallAdmissionChangeReason 1.3.6.1.4.1.2879.2.2.2.2.1.1 displaystring read-only
The reason why the call admission control state has changes.