SONOMASYSTEMS-SONOMA-ATM-IMA-MIB: View SNMP OID List / Download MIB

VENDOR: SONOMA SYSTEMS


 Home MIB: SONOMASYSTEMS-SONOMA-ATM-IMA-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 sonomaImaATMAdapterGroup 1.3.6.1.4.1.2926.25.7.7
     atmImaGroupObjects 1.3.6.1.4.1.2926.25.7.7.1
         imaGroupNumber 1.3.6.1.4.1.2926.25.7.7.1.1 integer read-only
The number of IMA groups configured on this system.
         imaGroupTable 1.3.6.1.4.1.2926.25.7.7.1.2 no-access
The IMA Group Configuration table.
             imaGroupEntry 1.3.6.1.4.1.2926.25.7.7.1.2.1 no-access
An entry in the IMA Group table.
                 imaGroupIndex 1.3.6.1.4.1.2926.25.7.7.1.2.1.1 integer read-only
A unique value for the IMA Group.
                 imaGroupRowStatus 1.3.6.1.4.1.2926.25.7.7.1.2.1.2 integer read-write
This object identifies the IMA Group's administrative status. It is used to enable and disable a group. Enumeration: 'disabled': 2, 'enabled': 1.
                 imaGroupIfIndex 1.3.6.1.4.1.2926.25.7.7.1.2.1.3 integer read-only
This object identifies the logical interface number ('ifIndex') assigned to this IMA group, and is used to identify corresponding rows in the Interfaces MIB. Note that re-initialization of the management agent may cause a client's 'imaGroupIfIndex' to change.
                 imaGroupNeState 1.3.6.1.4.1.2926.25.7.7.1.2.1.4 integer read-only
The current operational state of the near-end IMA Group State Machine. Enumeration: 'configAbortIncompatibleSymmetry': 5, 'notConfigured': 1, 'startUpAck': 3, 'startUp': 2, 'configAbortUnsupportedM': 4, 'operational': 9, 'insufficientLinks': 7, 'configAbortOther': 6, 'blocked': 8.
                 imaGroupFeState 1.3.6.1.4.1.2926.25.7.7.1.2.1.5 integer read-only
The current operational state of the far-end IMA Group State Machine. Enumeration: 'configAbortIncompatibleSymmetry': 5, 'notConfigured': 1, 'startUpAck': 3, 'startUp': 2, 'configAbortUnsupportedM': 4, 'operational': 9, 'insufficientLinks': 7, 'configAbortOther': 6, 'blocked': 8.
                 imaGroupFailureStatus 1.3.6.1.4.1.2926.25.7.7.1.2.1.6 integer read-only
The current failure status of the IMA group (the reason why the GTSM is in the down state. Enumeration: 'startUpNe': 2, 'insufficientLinksFe': 9, 'blockedFe': 11, 'otherFailure': 12, 'noFailure': 1, 'invalidMValueNe': 4, 'failedAssymetricFe': 7, 'blockedNe': 10, 'startUpFe': 3, 'insufficientLinksNe': 8, 'invalidMValueFe': 5, 'failedAssymetricNe': 6.
                 imaGroupSymmetry 1.3.6.1.4.1.2926.25.7.7.1.2.1.7 integer read-write
Symmetry of the IMA group. Enumeration: 'symmetricOperation': 1, 'asymmetricConfiguration': 3, 'asymmetricOperation': 2.
                 imaGroupMinNumTxLinks 1.3.6.1.4.1.2926.25.7.7.1.2.1.8 integer read-write
Minimum number of transmit links required to be Active for the IMA group to be in the Up state.
                 imaGroupMinNumRxLinks 1.3.6.1.4.1.2926.25.7.7.1.2.1.9 integer read-write
Minimum number of receive links required to be Active for the IMA group to be in the Up state.
                 imaGroupNeTxClkMode 1.3.6.1.4.1.2926.25.7.7.1.2.1.10 integer read-write
Transmit clocking mode used by the near-end IMA group. Enumeration: 'itc': 2, 'ctc': 1.
                 imaGroupFeTxClkMode 1.3.6.1.4.1.2926.25.7.7.1.2.1.11 integer read-only
Transmit clocking mode used by the far-end IMA group. Enumeration: 'itc': 2, 'ctc': 1.
                 imaGroupTxTimingRefLink 1.3.6.1.4.1.2926.25.7.7.1.2.1.12 integer read-write
The ifIndex of the transmit timing reference link to be used by the near-end for IMA data cell clock recovery from the ATM layer.
                 imaGroupRxTimingRefLink 1.3.6.1.4.1.2926.25.7.7.1.2.1.13 integer read-only
The ifIndex of the receive timing reference link to be used by near-end for IMA data cell clock recovery toward the ATM layer.
                 imaGroupLastChange 1.3.6.1.4.1.2926.25.7.7.1.2.1.14 integer read-only
The time-of-day the IMA group last changed operational state (i.e., value of imaNeGroupState changed).
                 imaGroupTxImaId 1.3.6.1.4.1.2926.25.7.7.1.2.1.15 integer read-write
The IMA ID currently in use by the near-end IMA function.
                 imaGroupRxImaId 1.3.6.1.4.1.2926.25.7.7.1.2.1.16 integer read-only
The IMA ID currently in use by the far-end IMA function.
                 imaGroupTxFrameLength 1.3.6.1.4.1.2926.25.7.7.1.2.1.17 integer read-write
The frame length to be used by the IMA group in the transmit direction. Can only be set when the IMA group is startup. Enumeration: 'm128': 128, 'm64': 64, 'm32': 32, 'm256': 256.
                 imaGroupRxFrameLength 1.3.6.1.4.1.2926.25.7.7.1.2.1.18 integer read-only
Value of IMA frame length as received from remote IMA function. Enumeration: 'm128': 128, 'm64': 64, 'm32': 32, 'm256': 256.
                 imaGroupDiffDelayMax 1.3.6.1.4.1.2926.25.7.7.1.2.1.19 integer read-write
The maximum number of milliseconds of delay differential among the links that will be tolerated on this interface.
                 imaGroupLeastDelayLink 1.3.6.1.4.1.2926.25.7.7.1.2.1.20 integer read-only
The ifIndex of the link configured in the IMA group which has the smallest link propagation delay. This value has meaning only if at least 1 link has been configured in the IMA group.
                 imaGroupDiffDelayMaxObs 1.3.6.1.4.1.2926.25.7.7.1.2.1.21 integer read-only
The latest maximum differential delay observed (in milliseconds), i.e. between the links having the least and most link propagation delay, among the receive links that are currently configured in the IMA group.
                 imaGroupAlphaValue 1.3.6.1.4.1.2926.25.7.7.1.2.1.22 integer read-write
This indicates the 'alpha' value used to specify the number of consecutive invalid ICP cells to be detected before moving to the IMA HUNT state.
                 imaGroupBetaValue 1.3.6.1.4.1.2926.25.7.7.1.2.1.23 integer read-write
This indicates the 'beta' value used to specify the number of consecutive errored ICP cells to be detected before moving to the IMA HUNT state.
                 imaGroupGammaValue 1.3.6.1.4.1.2926.25.7.7.1.2.1.24 integer read-write
This indicates the 'gamma' value used to specify the number of consecutive valid ICP cells to be detected before moving to the IMA SYNC state from the PRESYNC state.
                 imaGroupRunningSecs 1.3.6.1.4.1.2926.25.7.7.1.2.1.25 integer read-only
The amount of time (in seconds) since this IMA group has been in operation (up or down).
                 imaGroupUnavailSecs 1.3.6.1.4.1.2926.25.7.7.1.2.1.26 integer read-only
Count of one second intervals where the IMA Group Traffic State Machine is Down.
                 imaGroupNeNumFailures 1.3.6.1.4.1.2926.25.7.7.1.2.1.27 integer read-only
The number of times a near-end group failure (Config-Abort, Insufficient-Links) has been reported since power-up or reboot.
                 imaGroupFeNumFailures 1.3.6.1.4.1.2926.25.7.7.1.2.1.28 integer read-only
The number of times a far-end group failure (Config-Abort-FE, Insufficient-Links-FE, Blocked-FE) has been reported since power-up or reboot. This is an optional attribute.
                 imaGroupTxAvailCellRate 1.3.6.1.4.1.2926.25.7.7.1.2.1.29 integer read-only
The current cell rate (truncated value in cells per second) provided by this IMA group in the transmit direction, considering all the transmit links in the Active state.
                 imaGroupRxAvailCellRate 1.3.6.1.4.1.2926.25.7.7.1.2.1.30 integer read-only
The current cell rate (truncated value in cells per second) provided by this IMA group in the receive direction, considering all the receive links in the Active state.
                 imaGroupNumTxCfgLnks 1.3.6.1.4.1.2926.25.7.7.1.2.1.31 integer read-only
The number of links that are configured to transmit in this IMA group.
                 imaGroupNumRxCfgLnks 1.3.6.1.4.1.2926.25.7.7.1.2.1.32 integer read-only
The number of links that are configured to receive in this IMA group.
                 imaGroupNumTxActLnks 1.3.6.1.4.1.2926.25.7.7.1.2.1.33 integer read-only
The number of links which are configured to transmit and are currently Active in this IMA group.
                 imaGroupNumRxActLnks 1.3.6.1.4.1.2926.25.7.7.1.2.1.34 integer read-only
The number of links which are configured to receive and are currently Active in this IMA group.
                 imaGroupTestLinkIfIndex 1.3.6.1.4.1.2926.25.7.7.1.2.1.35 integer read-write
This object is used to designate an interface as the Test Link. A value of -1 specifies that the implementation may choose the Test Link. In this case, the implementation may also choose the value of 'imaGroupTestPattern'.
                 imaGroupTestPattern 1.3.6.1.4.1.2926.25.7.7.1.2.1.36 integer read-write
The value of this object is used to specify the test pattern in an IMA group loopback operation. A value in the range 0 to 255 designates a specific pattern. A value of -1 specifies that the implementation may choose the value. In this case, the implementation may also choose the value of 'imaGroupTestLinkIfIndex'.
                 imaGroupTestProcStatus 1.3.6.1.4.1.2926.25.7.7.1.2.1.37 integer read-write
This object is used to enable or disable the Test Pattern Procedure, and to note whether at least one link failed the test. The test is started by setting operating(2) status. If any link should fail the test, the IMA will set the status to linkfail(3). The linkfail(3) state will persist until either the disabled(1) state is set or until no instance of imaLinkTestProcStatus has the value linkfail(3). Only the values disabled(1) and operating(2) may be written. Writing the operating(2) value will not cause clearing of the linkfail(3) state. Enumeration: 'disabled': 1, 'linkFail': 3, 'operating': 2.
     atmImaLinkObjects 1.3.6.1.4.1.2926.25.7.7.2
         imaLinkTable 1.3.6.1.4.1.2926.25.7.7.2.1 no-access
The IMA group Link Status and Configuration table.
             imaLinkEntry 1.3.6.1.4.1.2926.25.7.7.2.1.1 no-access
An entry in the IMA Group Link table.
                 imaLinkIfIndex 1.3.6.1.4.1.2926.25.7.7.2.1.1.1 integer read-only
This corresponds to the 'ifIndex' of the MIB-II interface on which this link is established. This object also corresponds to the logical number ('ifIndex') assigned to this IMA link.
                 imaLinkRowStatus 1.3.6.1.4.1.2926.25.7.7.2.1.1.2 integer read-write
The imaLinkRowStatus object allows create, change and delete operations on imaLinkTable entries. To create a new conceptual row (or instance) of the imaLinkTable, imaLinkRowStatus must be set to 'createAndWait' or 'createAndGo.' A successful set of the object imaLinkGroupIndex must be performed before the RowStatus of this new row can transition to the 'Active' state. The imaLinkGroupIndex provides the association between a physical IMA link to an IMA group. To change (modify) an imaLinkTable entry, the imaLinkRowStatus object must be set to 'notInService'. Only then can the conceptual row be changed. Setting object imaLinkGroupIndex to a different value has the effect of changing the association between a physical IMA link and an IMA group. To place the link 'in group', the imaLinkRowStatus object is set to 'Active'. While the row is not in 'Active' state, both the Transmit and Receive IMA state machines are in the 'Not In Group' state. To remove (delete) an imaLinkTable entry from this table, set this object to 'destroy.' A network manager may elect to perform a delete operation followed immediately by a create operation instead of a modify operation. The net effect of the delete/create is to re-instantiate (reset) agent counters defined in this table. Enumeration: 'disabled': 2, 'enabled': 1.
                 imaLinkGroupIndex 1.3.6.1.4.1.2926.25.7.7.2.1.1.3 integer read-write
The value which identifies the IMA group (imaGroupIndex) of which this link is a member. Enumeration: 'none': 2, 'imaGroup-1': 1.
                 imaLinkNeTxState 1.3.6.1.4.1.2926.25.7.7.2.1.1.4 integer read-only
The current state of the near-end transmit link. Enumeration: 'unusableFailed': 6, 'usable': 7, 'unusableMisconnected': 4, 'unusableNoGivenReason': 2, 'unusableFault': 3, 'unusableBlocked': 5, 'active': 8, 'notInGroup': 1.
                 imaLinkNeRxState 1.3.6.1.4.1.2926.25.7.7.2.1.1.5 integer read-only
The current state of the near-end receive link. Enumeration: 'unusableFailed': 6, 'usable': 7, 'unusableMisconnected': 4, 'unusableNoGivenReason': 2, 'unusableFault': 3, 'unusableBlocked': 5, 'active': 8, 'notInGroup': 1.
                 imaLinkFeTxState 1.3.6.1.4.1.2926.25.7.7.2.1.1.6 integer read-only
The current state of the far-end transmit link as reported via ICP cells. Enumeration: 'unusableFailed': 6, 'usable': 7, 'unusableMisconnected': 4, 'unusableNoGivenReason': 2, 'unusableFault': 3, 'unusableBlocked': 5, 'active': 8, 'notInGroup': 1.
                 imaLinkFeRxState 1.3.6.1.4.1.2926.25.7.7.2.1.1.7 integer read-only
The current state of the far-end receive link as reported via ICP cells. Enumeration: 'unusableFailed': 6, 'usable': 7, 'unusableMisconnected': 4, 'unusableNoGivenReason': 2, 'unusableFault': 3, 'unusableBlocked': 5, 'active': 8, 'notInGroup': 1.
                 imaLinkNeRxFailureStatus 1.3.6.1.4.1.2926.25.7.7.2.1.1.8 integer read-only
The current link failure status of the near-end receive link. Enumeration: 'farEndRxLinkUnusable': 9, 'fault': 7, 'farEndTxLinkUnusable': 8, 'lodsFailure': 4, 'noFailure': 1, 'misConnected': 5, 'lifFailure': 3, 'imaLinkFailure': 2, 'blocked': 6.
                 imaLinkFeRxFailureStatus 1.3.6.1.4.1.2926.25.7.7.2.1.1.9 integer read-only
The current link failure status of the far-end receive link as reported via ICP cells. Enumeration: 'farEndRxLinkUnusable': 9, 'fault': 7, 'farEndTxLinkUnusable': 8, 'lodsFailure': 4, 'noFailure': 1, 'misConnected': 5, 'lifFailure': 3, 'imaLinkFailure': 2, 'blocked': 6.
                 imaLinkTxLid 1.3.6.1.4.1.2926.25.7.7.2.1.1.10 integer read-only
The outgoing LID used currently on the link by the local end. This value has meaning only if the link belongs to an IMA group.
                 imaLinkRxLid 1.3.6.1.4.1.2926.25.7.7.2.1.1.11 integer read-only
The incoming LID used currently on the link by the remote end as reported via ICP cells. This value has meaning only if the link belongs to an IMA group.
                 imaLinkRelDelay 1.3.6.1.4.1.2926.25.7.7.2.1.1.12 integer read-only
The latest measured delay on this link relative to the link, in the same IMA group, with the least delay.
                 imaLinkImaViolations 1.3.6.1.4.1.2926.25.7.7.2.1.1.13 integer read-only
ICP violations: count of errored, invalid or missing ICP cells during non-SES-IMA condition.
                 imaLinkOifAnomalies 1.3.6.1.4.1.2926.25.7.7.2.1.1.14 integer read-only
The number of OIF anomalies during non-SES-IMA condition at the near-end. This is an optional attribute.
                 imaLinkNeSevErroredSec 1.3.6.1.4.1.2926.25.7.7.2.1.1.15 integer read-only
Count of one second intervals containing several IV-IMA, or one or more link defects (e.g., LOS, OOF/LOF, AIS, LCD), LIF, LODS defects during non-UAS-IMA condition.
                 imaLinkFeSevErroredSec 1.3.6.1.4.1.2926.25.7.7.2.1.1.16 integer read-only
Count of one second intervals containing one or more RDI-IMA defects.
                 imaLinkNeUnavailSec 1.3.6.1.4.1.2926.25.7.7.2.1.1.17 integer read-only
Count of unavailable seconds at near-end: unavailability begins at the onset of 10 contiguous SES-IMA and ends at the onset of 10 contiguous seconds with no SES-IMA.
                 imaLinkFeUnavailSec 1.3.6.1.4.1.2926.25.7.7.2.1.1.18 integer read-only
Count of unavailable seconds at far-end: unavailability begins at the onset of 10 contiguous SES-IMA-FE and ends at the onset of 10 contiguous seconds with no SES-IMA-FE.
                 imaLinkNeTxUnusableSec 1.3.6.1.4.1.2926.25.7.7.2.1.1.19 integer read-only
Tx Unusable seconds: count of Unusable seconds at the near end Tx LSM.
                 imaLinkNeRxUnusableSec 1.3.6.1.4.1.2926.25.7.7.2.1.1.20 integer read-only
Rx Unusable seconds: count of Unusable seconds at the near end Rx LSM.
                 imaLinkFeTxUnusableSec 1.3.6.1.4.1.2926.25.7.7.2.1.1.21 integer read-only
Tx Unusable seconds at far-end: count of seconds with Unusable indications from the far-end Tx LSM.
                 imaLinkFeRxUnusableSec 1.3.6.1.4.1.2926.25.7.7.2.1.1.22 integer read-only
Rx Unusable seconds at far-end: count of seconds with Unusable indications from the far-end Rx LSM.
                 imaLinkNeTxNumFailures 1.3.6.1.4.1.2926.25.7.7.2.1.1.23 integer read-only
The number of times a near-end transmit failure alarm condition has been entered on this link.
                 imaLinkNeRxNumFailures 1.3.6.1.4.1.2926.25.7.7.2.1.1.24 integer read-only
The number of times a near-end receive failure alarm condition has been entered on this link (i.e., LIF, LODS, Mis-Connected, RDI-IMA).
                 imaLinkFeTxNumFailures 1.3.6.1.4.1.2926.25.7.7.2.1.1.25 integer read-only
The number of times a far-end transmit failure alarm condition has been entered on this link. This is an optional attribute.
                 imaLinkFeRxNumFailures 1.3.6.1.4.1.2926.25.7.7.2.1.1.26 integer read-only
The number of times a far-end receive failure alarm condition has been entered on this link (i.e., LIF, LODS, Mis-Connected, RDI-IMA). This is an optional attribute.
                 imaLinkTxStuffs 1.3.6.1.4.1.2926.25.7.7.2.1.1.27 integer read-only
Counts of stuff events inserted in the transmit direction. This is an optional attribute.
                 imaLinkRxStuffs 1.3.6.1.4.1.2926.25.7.7.2.1.1.28 integer read-only
Counts of stuff events detected in the receive direction. This is an optional attribute.
                 imaLinkRxTestPattern 1.3.6.1.4.1.2926.25.7.7.2.1.1.29 integer read-only
This object identifies the test pattern received in the ICP Cell (octet 17) on the link during the IMA Test Pattern Procedure. This value then may be compared to the transmitted test pattern.
                 imaLinkTestProcStatus 1.3.6.1.4.1.2926.25.7.7.2.1.1.30 integer read-only
This value indicates the current state of the Test Pattern Procedure. If the value is disabled(1), the test is not running. A value of operating(2) means the test is running and no error has been found on this interface. A value of linkfail(3) means an error has been detected o this link during the test. Once an error occurs, the linkfail(3) value is latched until either this object is read or until the imaGroupTestProcStatus is moved to disabled(1). Once read, if the error no longer persists, a subsequent read will report the value operating(2). Enumeration: 'disabled': 1, 'linkFail': 3, 'operating': 2.
                 imaLinkNumber 1.3.6.1.4.1.2926.25.7.7.2.1.1.31 integer read-only
This corresponds to the link number on the IMA Group.
     atmImaDs1Objects 1.3.6.1.4.1.2926.25.7.7.3
         imaDs1Table 1.3.6.1.4.1.2926.25.7.7.3.1 no-access
A table of physical layer configuration for the DS1 interface
             imaDs1Entry 1.3.6.1.4.1.2926.25.7.7.3.1.1 no-access
A entry in the table, containing information about the physical layer of a DS1 interface
                 imaDs1Index 1.3.6.1.4.1.2926.25.7.7.3.1.1.1 integer read-only
The physical interface index.
                 imaDs1GroupIndex 1.3.6.1.4.1.2926.25.7.7.3.1.1.2 integer read-only
The IMA Group's interface index.
                 imaDs1ConfLoopback 1.3.6.1.4.1.2926.25.7.7.3.1.1.3 integer read-write
This object is used to modify the state of internal loopback.... Enumeration: 'local': 4, 'none': 1, 'line': 3, 'payload': 2.
                 imaDs1ConfTxClockSelect 1.3.6.1.4.1.2926.25.7.7.3.1.1.4 integer read-write
Configure the transmit clock. Enumeration: 'internal': 1, 'recovered': 2.
                 imaDs1ConfLineCode 1.3.6.1.4.1.2926.25.7.7.3.1.1.5 integer read-only
Configure the line coding method. Enumeration: 'ami': 2, 'b8zs': 1.
                 imaDs1ConfFrameFormat 1.3.6.1.4.1.2926.25.7.7.3.1.1.6 integer read-only
Configure the framing format. Enumeration: 'esf': 2, 'sf': 1.
                 imaDs1ConfCableLength 1.3.6.1.4.1.2926.25.7.7.3.1.1.7 integer read-write
Configure the cable length. Enumeration: 'short-haul-533-655-FT': 5, 'short-haul-266-399-FT': 3, 'long-haul-0-0-dB': 6, 'short-haul-0-133-FT': 1, 'long-haul-15-0-dB': 8, 'short-haul-133-266-FT': 2, 'short-haul-399-533-FT': 4, 'long-haul-22-5-dB': 9, 'long-haul-7-5-dB': 7.
                 imaDs1ConfTxTimingRefLink 1.3.6.1.4.1.2926.25.7.7.3.1.1.8 integer read-only
The ifIndex of the transmit timing reference link to be used by the near-end for IMA data cell clock recovery from the ATM layer.
                 imaDs1ConfScramble 1.3.6.1.4.1.2926.25.7.7.3.1.1.9 integer read-only
The cells are scrambled / de-scrambled on the line. Enumeration: 'on': 1, 'off': 2.
                 imaDs1StatsNoSignals 1.3.6.1.4.1.2926.25.7.7.3.1.1.10 counter read-only
No signal error counter.
                 imaDs1StatsAISDetects 1.3.6.1.4.1.2926.25.7.7.3.1.1.11 counter read-only
AIS Detect counter.
                 imaDs1StatsYelAlarmCount 1.3.6.1.4.1.2926.25.7.7.3.1.1.12 counter read-only
A count of the number of Yellow Alarms.
                 imaDs1StatsLCVErrors 1.3.6.1.4.1.2926.25.7.7.3.1.1.13 counter read-only
LCV (Line Code Violation) error counter.
                 imaDs1StatsPCVErrors 1.3.6.1.4.1.2926.25.7.7.3.1.1.14 counter read-only
PCV (Path Code Violation) error counter.
                 imaDs1StatsMOSErrors 1.3.6.1.4.1.2926.25.7.7.3.1.1.15 counter read-only
Multiframe out of sync error counter.
                 imaDs1StatsSyncLossCount 1.3.6.1.4.1.2926.25.7.7.3.1.1.16 counter read-only
Sync Loss counter.
                 imaDs1StatsHECErrors 1.3.6.1.4.1.2926.25.7.7.3.1.1.17 counter read-only
HEC error counter.
                 imaDs1StatsSignalLoss 1.3.6.1.4.1.2926.25.7.7.3.1.1.18 integer read-only
Signal loss indication. Enumeration: 'false': 2, 'true': 1.
                 imaDs1StatsAISDetect 1.3.6.1.4.1.2926.25.7.7.3.1.1.19 integer read-only
AIS indication. Enumeration: 'false': 2, 'true': 1.
                 imaDs1StatsYellowAlarm 1.3.6.1.4.1.2926.25.7.7.3.1.1.20 integer read-only
Yellow Alarm indication. Enumeration: 'false': 2, 'true': 1.
                 imaDs1StatsSyncLoss 1.3.6.1.4.1.2926.25.7.7.3.1.1.21 integer read-only
Loss of sync indication. Enumeration: 'false': 2, 'true': 1.
                 imaDs1StatsTxClockLoss 1.3.6.1.4.1.2926.25.7.7.3.1.1.22 integer read-only
Loss of transmit clock indication. Enumeration: 'false': 2, 'true': 1.
                 imaDs1StatsErrSec 1.3.6.1.4.1.2926.25.7.7.3.1.1.23 counter read-only
Count of Errored Seconds.
                 imaDs1StatsLineErrSec 1.3.6.1.4.1.2926.25.7.7.3.1.1.24 counter read-only
Count of Line Errored Seconds.
                 imaDs1StatsErrFreeSec 1.3.6.1.4.1.2926.25.7.7.3.1.1.25 counter read-only
Count of Error Free Seconds.
                 imaDs1StatsBurstErrSec 1.3.6.1.4.1.2926.25.7.7.3.1.1.26 counter read-only
Count of Bursty Errored Seconds.
                 imaDs1StatsSevErrSec 1.3.6.1.4.1.2926.25.7.7.3.1.1.27 counter read-only
Count of Severely Errored Seconds.
                 imaDs1StatsConSevErrSec 1.3.6.1.4.1.2926.25.7.7.3.1.1.28 counter read-only
Count of Consecutive Severely Errored Seconds.
                 imaDs1StatsFailedSignal 1.3.6.1.4.1.2926.25.7.7.3.1.1.29 counter read-only
Count of Failed Signal conditions.
                 imaDs1StatsUnavailSec 1.3.6.1.4.1.2926.25.7.7.3.1.1.30 counter read-only
Count of unavailable secondss.
                 imaDs1StatsSevErrFramSec 1.3.6.1.4.1.2926.25.7.7.3.1.1.31 counter read-only
Count of Severely Errored Framing Seconds.
                 imaDs1StatsClearCounters 1.3.6.1.4.1.2926.25.7.7.3.1.1.32 integer read-write
Clear all counters in this group ONLY. Enumeration: 'false': 2, 'true': 1.
                 imaDs1DebugAddr 1.3.6.1.4.1.2926.25.7.7.3.1.1.33 integer read-write
PCI Phy address for DS1 port register.
                 imaDs1DebugReadValue 1.3.6.1.4.1.2926.25.7.7.3.1.1.34 integer read-write
Value read from DS1 port register.
                 imaDs1DebugWriteValue 1.3.6.1.4.1.2926.25.7.7.3.1.1.35 integer read-write
Value written to DS1 port register.
                 imaDs1DebugRead 1.3.6.1.4.1.2926.25.7.7.3.1.1.36 integer read-write
Read or Write of DS1 port register (TRUE = READ).
                 imaDs1PortNumber 1.3.6.1.4.1.2926.25.7.7.3.1.1.37 integer read-only
The port number on the IMA.
     atmImaE1Objects 1.3.6.1.4.1.2926.25.7.7.4
         imaE1Table 1.3.6.1.4.1.2926.25.7.7.4.1 no-access
A table of physical layer configuration for the E1 interface
             imaE1Entry 1.3.6.1.4.1.2926.25.7.7.4.1.1 no-access
A entry in the table, containing information about the physical layer of a E1 interface
                 imaE1Index 1.3.6.1.4.1.2926.25.7.7.4.1.1.1 integer read-only
The physical interface index.
                 imaE1GroupIndex 1.3.6.1.4.1.2926.25.7.7.4.1.1.2 integer read-only
The IMA Group's interface index.
                 imaE1ConfLoopback 1.3.6.1.4.1.2926.25.7.7.4.1.1.3 integer read-write
This object is used to modify the state of internal loopback.... Enumeration: 'disabled': 1, 'internal': 2, 'external': 3.
                 imaE1ConfTxClockSelect 1.3.6.1.4.1.2926.25.7.7.4.1.1.4 integer read-write
Configure the transmit clock. Enumeration: 'internal': 1, 'recovered': 2.
                 imaE1ConfLineCode 1.3.6.1.4.1.2926.25.7.7.4.1.1.5 integer read-only
Configure the line coding method. Enumeration: 'ami': 2, 'hdb3': 1.
                 imaE1ConfFrameFormat 1.3.6.1.4.1.2926.25.7.7.4.1.1.6 integer read-only
Configure the framing format. Enumeration: 'crc4-enabled': 1, 'crc4-disabled': 2.
                 imaE1ConfCableLength 1.3.6.1.4.1.2926.25.7.7.4.1.1.7 integer read-write
Configure Long or Short Haul. Enumeration: 'long-haul-75': 3, 'short-haul': 1, 'long-haul': 2.
                 imaE1ConfTxTimingRefLink 1.3.6.1.4.1.2926.25.7.7.4.1.1.8 integer read-only
The ifIndex of the transmit timing reference link to be used by the near-end for IMA data cell clock recovery from the ATM layer.
                 imaE1ConfScramble 1.3.6.1.4.1.2926.25.7.7.4.1.1.9 integer read-only
The cells are scrambled / de-scrambled on the line. Enumeration: 'on': 1, 'off': 2.
                 imaE1StatsNoSignals 1.3.6.1.4.1.2926.25.7.7.4.1.1.10 counter read-only
No signal error counter.
                 imaE1StatsRAIDetects 1.3.6.1.4.1.2926.25.7.7.4.1.1.11 counter read-only
RAI Detect counter.
                 imaE1StatsFASErrors 1.3.6.1.4.1.2926.25.7.7.4.1.1.12 counter read-only
FAS (Frame Alignment Signal) error counter.
                 imaE1StatsCVErrors 1.3.6.1.4.1.2926.25.7.7.4.1.1.13 counter read-only
CV (Code Violation) error counter.
                 imaE1StatsCRCErrors 1.3.6.1.4.1.2926.25.7.7.4.1.1.14 counter read-only
CRC4 error counter.
                 imaE1StatsEBitErrors 1.3.6.1.4.1.2926.25.7.7.4.1.1.15 counter read-only
E-Bit (FEBE) error counter.
                 imaE1StatsSyncLossCount 1.3.6.1.4.1.2926.25.7.7.4.1.1.16 counter read-only
Sync Loss counter.
                 imaE1StatsHECErrors 1.3.6.1.4.1.2926.25.7.7.4.1.1.17 counter read-only
HEC error counter.
                 imaE1StatsSignalLoss 1.3.6.1.4.1.2926.25.7.7.4.1.1.18 integer read-only
Signal loss indication. Enumeration: 'false': 2, 'true': 1.
                 imaE1StatsRAIDetect 1.3.6.1.4.1.2926.25.7.7.4.1.1.19 integer read-only
RAI indication. Enumeration: 'false': 2, 'true': 1.
                 imaE1StatsSyncLoss 1.3.6.1.4.1.2926.25.7.7.4.1.1.20 integer read-only
Loss of sync indication. Enumeration: 'false': 2, 'true': 1.
                 imaE1StatsTxClockLoss 1.3.6.1.4.1.2926.25.7.7.4.1.1.21 integer read-only
Loss of transmit clock indication. Enumeration: 'false': 2, 'true': 1.
                 imaE1StatsErrSec 1.3.6.1.4.1.2926.25.7.7.4.1.1.22 counter read-only
Count of Errored Seconds.
                 imaE1StatsLineErrSec 1.3.6.1.4.1.2926.25.7.7.4.1.1.23 counter read-only
Count of Line Errored Seconds.
                 imaE1StatsErrFreeSec 1.3.6.1.4.1.2926.25.7.7.4.1.1.24 counter read-only
Count of Error Free Seconds.
                 imaE1StatsBurstErrSec 1.3.6.1.4.1.2926.25.7.7.4.1.1.25 counter read-only
Count of Bursty Errored Seconds.
                 imaE1StatsSevErrSec 1.3.6.1.4.1.2926.25.7.7.4.1.1.26 counter read-only
Count of Severely Errored Seconds.
                 imaE1StatsConSevErrSec 1.3.6.1.4.1.2926.25.7.7.4.1.1.27 counter read-only
Count of Consecutive Severely Errored Seconds.
                 imaE1StatsFailedSignal 1.3.6.1.4.1.2926.25.7.7.4.1.1.28 counter read-only
Count of Failed Signal conditions.
                 imaE1StatsUnavailSec 1.3.6.1.4.1.2926.25.7.7.4.1.1.29 counter read-only
Count of unavailable secondss.
                 imaE1StatsSevErrFramSec 1.3.6.1.4.1.2926.25.7.7.4.1.1.30 counter read-only
Count of Severely Errored Framing Seconds.
                 imaE1StatsClearCounters 1.3.6.1.4.1.2926.25.7.7.4.1.1.31 integer read-write
Clear all counters in this group ONLY. Enumeration: 'false': 2, 'true': 1.
                 imaE1DebugAddr 1.3.6.1.4.1.2926.25.7.7.4.1.1.32 integer read-write
PCI Phy address for E1 port register.
                 imaE1DebugReadValue 1.3.6.1.4.1.2926.25.7.7.4.1.1.33 integer read-write
Value read from E1 port register.
                 imaE1DebugWriteValue 1.3.6.1.4.1.2926.25.7.7.4.1.1.34 integer read-write
Value written to E1 port register.
                 imaE1DebugRead 1.3.6.1.4.1.2926.25.7.7.4.1.1.35 integer read-write
Read or Write of E1 port register (TRUE = READ).
                 imaE1PortNumber 1.3.6.1.4.1.2926.25.7.7.4.1.1.36 integer read-only
The port number on the IMA.