SONOMASYSTEMS-SONOMA-ATM-E3-MIB: View SNMP OID List / Download MIB

VENDOR: SONOMA SYSTEMS


 Home MIB: SONOMASYSTEMS-SONOMA-ATM-E3-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, SONOMASYSTEMS-SONOMA-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 sonomaE3ATMAdapterGroup 1.3.6.1.4.1.2926.25.7.3
     atmE3ConfGroup 1.3.6.1.4.1.2926.25.7.3.1
         atmE3ConfPhyTable 1.3.6.1.4.1.2926.25.7.3.1.1 no-access
A table of physical layer configuration for the E3 interface
             atmE3ConfPhyEntry 1.3.6.1.4.1.2926.25.7.3.1.1.1 no-access
A entry in the table, containing information about the physical layer of a E3 interface
                 atmE3ConfPhysIndex 1.3.6.1.4.1.2926.25.7.3.1.1.1.1 integer read-only
The physical interface index.
                 atmE3ConfFraming 1.3.6.1.4.1.2926.25.7.3.1.1.1.2 integer read-only
Indicates the type of framing supported. Enumeration: 'framingE3': 2.
                 atmE3ConfInsGFCBits 1.3.6.1.4.1.2926.25.7.3.1.1.1.3 integer read-write
Enable/disable the insertion of GFC bits. Enumeration: 'disabled': 2, 'enabled': 1.
                 atmE3ConfSerBipolarIO 1.3.6.1.4.1.2926.25.7.3.1.1.1.4 integer read-write
Enable/disable bipolar serial I/O. Enumeration: 'disabled': 2, 'enabled': 1.
                 atmE3ConfPayloadScrambling 1.3.6.1.4.1.2926.25.7.3.1.1.1.5 integer read-write
Enable/disable payload scrambling. Enumeration: 'disabled': 2, 'enabled': 1.
                 atmE3ConfOverheadProcessing 1.3.6.1.4.1.2926.25.7.3.1.1.1.6 integer read-write
Enable/disable Overhead processing. Enumeration: 'disabled': 2, 'enabled': 1.
                 atmE3ConfHDB3Encoding 1.3.6.1.4.1.2926.25.7.3.1.1.1.7 integer read-write
Enable/disable HDB3 (High Density Bipolar 3) Encoding. Enumeration: 'disabled': 2, 'enabled': 1.
                 atmE3ConfLoopback 1.3.6.1.4.1.2926.25.7.3.1.1.1.8 integer read-write
This object is used to modify the state of internal loopback.... Enumeration: 'disabled': 1, 'internal': 2, 'external': 3.
                 atmE3ConfCableLength 1.3.6.1.4.1.2926.25.7.3.1.1.1.9 integer read-write
Configure for the length of the cable. Enumeration: 'greaterThan225Feet': 2, 'notGreaterThan225Feet': 1.
                 atmE3ConfInternalEqualizer 1.3.6.1.4.1.2926.25.7.3.1.1.1.10 integer read-write
Configure to use or bypass the internal equalizer. Enumeration: 'use': 1, 'bypass': 2.
                 atmE3ConfFillerCells 1.3.6.1.4.1.2926.25.7.3.1.1.1.11 integer read-write
This parameter indicates the type of filler cells to send when there are no data cells. Enumeration: 'idle': 2, 'unassigned': 1.
                 atmE3ConfGenerateClock 1.3.6.1.4.1.2926.25.7.3.1.1.1.12 integer read-write
Enable/disable clock generation. Enumeration: 'disabled': 2, 'enabled': 1.
     atmE3StatsGroup 1.3.6.1.4.1.2926.25.7.3.2
         atmE3StatsTable 1.3.6.1.4.1.2926.25.7.3.2.1 no-access
A table of physical layer statistics information for the E3 interface
             atmE3StatsEntry 1.3.6.1.4.1.2926.25.7.3.2.1.1 no-access
A entry in the table, containing information about the physical layer of a E3 interface
                 atmE3StatsPhysIndex 1.3.6.1.4.1.2926.25.7.3.2.1.1.1 integer read-only
The physical interface index.
                 atmE3StatsNoSignals 1.3.6.1.4.1.2926.25.7.3.2.1.1.2 counter read-only
No signal error counter.
                 atmE3StatsNoE3Frames 1.3.6.1.4.1.2926.25.7.3.2.1.1.3 counter read-only
No E3 frames error counter.
                 atmE3StatsFrameErrors 1.3.6.1.4.1.2926.25.7.3.2.1.1.4 counter read-only
A count of the number of Frames in error.
                 atmE3StatsHECErrors 1.3.6.1.4.1.2926.25.7.3.2.1.1.5 counter read-only
HEC (Header Error Check) error counter.
                 atmE3StatsEMErrors 1.3.6.1.4.1.2926.25.7.3.2.1.1.6 counter read-only
EM (error monitoring) error counter.
                 atmE3StatsFeBlockErrors 1.3.6.1.4.1.2926.25.7.3.2.1.1.7 counter read-only
Far End Block error counter.
                 atmE3StatsBpvErrors 1.3.6.1.4.1.2926.25.7.3.2.1.1.8 counter read-only
Bipolar Violation error counter.
                 atmE3StatsPayloadTypeMismatches 1.3.6.1.4.1.2926.25.7.3.2.1.1.9 counter read-only
Payload Type Mismatches error counter.
                 atmE3StatsTimingMarkers 1.3.6.1.4.1.2926.25.7.3.2.1.1.10 counter read-only
Timing Markers error counter.
                 atmE3StatsAISDetects 1.3.6.1.4.1.2926.25.7.3.2.1.1.11 counter read-only
AIS (Alarm Indication Signal) detect counter.
                 atmE3StatsRDIDetects 1.3.6.1.4.1.2926.25.7.3.2.1.1.12 counter read-only
RDI (Remote Defect Indication) error counter.
                 atmE3StatsSignalLoss 1.3.6.1.4.1.2926.25.7.3.2.1.1.13 integer read-only
Signal loss indication. Enumeration: 'false': 2, 'true': 1.
                 atmE3StatsFrameLoss 1.3.6.1.4.1.2926.25.7.3.2.1.1.14 integer read-only
Frame loss indication. Enumeration: 'false': 2, 'true': 1.
                 atmE3StatsSyncLoss 1.3.6.1.4.1.2926.25.7.3.2.1.1.15 integer read-only
Synchronization loss counter. Enumeration: 'false': 2, 'true': 1.
                 atmE3StatsOutOfCell 1.3.6.1.4.1.2926.25.7.3.2.1.1.16 integer read-only
ATM out-of-cell delineation. Enumeration: 'false': 2, 'true': 1.
                 atmE3StatsFIFOOverflow 1.3.6.1.4.1.2926.25.7.3.2.1.1.17 integer read-only
ATM FIFO overflow. Enumeration: 'false': 2, 'true': 1.
                 atmE3StatsPayloadTypeMismatch 1.3.6.1.4.1.2926.25.7.3.2.1.1.18 integer read-only
The Payload Type Mismatch state. Enumeration: 'false': 2, 'true': 1.
                 atmE3StatsTimingMarker 1.3.6.1.4.1.2926.25.7.3.2.1.1.19 integer read-only
The Timing Marker state. Enumeration: 'false': 2, 'true': 1.
                 atmE3StatsAISDetect 1.3.6.1.4.1.2926.25.7.3.2.1.1.20 integer read-only
The AIS (Alarm Indication Signal) state. Enumeration: 'false': 2, 'true': 1.
                 atmE3StatsRDIDetect 1.3.6.1.4.1.2926.25.7.3.2.1.1.21 integer read-only
RDI (Remote Defect Indication) state. Enumeration: 'false': 2, 'true': 1.
                 atmE3StatsClearCounters 1.3.6.1.4.1.2926.25.7.3.2.1.1.22 integer read-write
Clear all counters in this group ONLY. Enumeration: 'false': 2, 'true': 1.