SMC-AGENT-MIB: View SNMP OID List / Download MIB

VENDOR: SMC


 Home MIB: SMC-AGENT-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 smc 1.3.6.1.4.1.202
         smcDosWs 1.3.6.1.4.1.202.2
             smcDosWsPcTyp 1.3.6.1.4.1.202.2.1 displaystring read-only
Make and model of the PC. This may have to be entered in the configuration disk file. It may or may not be detectable via signature strings in the BIOS.
             smcDosWsPcProc 1.3.6.1.4.1.202.2.2 displaystring read-only
This is a text string showing the processor type and indicating whether a math coprocessor exists, e.g. '80286 w/math coprocessor'.
             smcDosWsPcBios 1.3.6.1.4.1.202.2.3 displaystring read-only
This is a text signature string identifying the PC bios, e.g. 'Phoenix 80386SX ROM BIOS PLUS Version 1.10'.
             smcDosWsPcRam 1.3.6.1.4.1.202.2.4 displaystring read-only
This is a text string listing the PC's ram configuration, base, EMS, XMS, e.g. '640K base, 1024K EMS, 3072K XMS'.
             smcDosWsPcDisk 1.3.6.1.4.1.202.2.5 displaystring read-only
This is a text string listing the PC's disk configuration, number and size of drives, e.g. '1.25M Fpy, 1.44M Fpy, 79M HD'.
             smcDosWsPcVideo 1.3.6.1.4.1.202.2.6 displaystring read-only
This is a text string listing the PC's video interface type and monitor type, e.g. 'VGA Color'.
             smcDosWsPcIo 1.3.6.1.4.1.202.2.7 displaystring read-only
This is a text string listing the parallel and serial ports installed on the PC, e.g. 'LPT1, COM1, COM2'.
             smcDosWsDosVer 1.3.6.1.4.1.202.2.8 displaystring read-only
This is a text string listing the version of DOS, e.g. 'DOS 3.3'.
             smcDosWsDrvId 1.3.6.1.4.1.202.2.9 displaystring read-only
This is the signature string from the network driver. It is similar to the string that is displayed by the NetWare server MONITOR nlm.
             smcDosWsNicBasIo 1.3.6.1.4.1.202.2.10 displaystring read-only
This is the I/O base address of the adapter card.
             smcDosWsNicIrq 1.3.6.1.4.1.202.2.11 displaystring read-only
This is the adapter IRQ number.
             smcDosWsNicRam 1.3.6.1.4.1.202.2.12 displaystring read-only
This is the adapter card packet ram address.
             smcDosWsNodId 1.3.6.1.4.1.202.2.13 macaddress read-only
This is the adapter card 48 bit node ID.
             smcDosWsIpAdr 1.3.6.1.4.1.202.2.14 ipaddress read-only
This is the IP address of the PC. The agent takes this information from a configuration disk file. If the PC is also running a TCP/IP stack, it is up to the installer to specify in the agent configuration file the same IP address that the PC's TCP/IP stack has.
             smcDosWsComment 1.3.6.1.4.1.202.2.15 displaystring read-write
This is a text string which is set from a configuration disk file that contains comments about the PC that the network manager feels is meaningful. For example 'Motherboard replaced 3 times in the last year'.
             smcDosWsPcDate 1.3.6.1.4.1.202.2.16 displaystring read-only
This shows the current date set into the PC to alert the network manager of potential problems with software that decides configuration currency based on file dates and times.
             smcDosWsPcTime 1.3.6.1.4.1.202.2.17 displaystring read-only
This shows the current time set into the PC to alert the network manager of potential problems with software that decides configuration currency based on file dates and times. Note that because of polling times this time may be erratic within a window of a few seconds.
             smcDosWsRst 1.3.6.1.4.1.202.2.18 integer read-write
This variable always reports value = 1. Setting it to 2 results in an adapter reset, after which it will contain value = 1 again.
             smcDosWsProtoMix 1.3.6.1.4.1.202.2.19 displaystring read-only
This text string reports the most frequent transport protocols and their approximate percentages of traffic load.
             smcDosWsRcvPkts 1.3.6.1.4.1.202.2.20 counter read-only
Number of packets received by the workstation
             smcDosWsXmtPkts 1.3.6.1.4.1.202.2.21 counter read-only
Number of packets sent by the workstation
             smcDosWsDrvSpcTable 1.3.6.1.4.1.202.2.22 no-access
                   smcDosWsDrvSpcEntry 1.3.6.1.4.1.202.2.22.1 no-access
                       smcDosWsDrvSpcId 1.3.6.1.4.1.202.2.22.1.1 integer read-only
Number of Driver Specific entry. 1 for first entry, 2 for second entry, etc.
                       smcDosWsDrvSpcTxt 1.3.6.1.4.1.202.2.22.1.2 displaystring read-only
Textual name of driver specific diagnostic counter
                       smcDosWsDrvSpcCnt 1.3.6.1.4.1.202.2.22.1.3 counter read-only
Numeric value of driver specific diagnostic counter
             smcDosWsTrapDestTable 1.3.6.1.4.1.202.2.23 no-access
                   smcDosWsTrapDestEntry 1.3.6.1.4.1.202.2.23.1 no-access
                       smcDosWsTrapId 1.3.6.1.4.1.202.2.23.1.1 integer read-only
Number of Trap Destination entry. 1 for first entry, 2 for second entry, etc.
                       smcDosWsTrapDstAdr 1.3.6.1.4.1.202.2.23.1.2 ipaddress read-write
This is an IP address to which alerts (traps) should be sent when significant events occur.
                       smcDosWsTrapDstPro 1.3.6.1.4.1.202.2.23.1.3 integer read-write
This is a code indicating the protocol to use when sending alerts. 1 means disabled, i.e. the corresponding smcDosWsTrapDstAdr variable is not really intended to receive traps. 2 means use TCP/IP protocol. 3,4,5,6 mean use IPX protocol using Ethernet II, RAW 802.2, 802.2 SNAP or 802.3 physical layer.
             smcDosWsApiTrap 1.3.6.1.4.1.202.2.24 displaystring read-only
This is a string set by external applications which use the PC Agent API to send an SNMP trap