SLE-MPLS-TP-TUNNEL-MIB: View SNMP OID List / Download MIB

VENDOR: DASAN CO.,LTD.


 Home MIB: SLE-MPLS-TP-TUNNEL-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 sleMpls 1.3.6.1.4.1.6296.101.16
SLE MPLS.
       sleMplsTpTunnel 1.3.6.1.4.1.6296.101.16.14
Copyright (C) The Internet Society (2004). The initial version of this MIB module was published in RFC 3812. For full legal notices see the RFC itself or see: http://www.ietf.org/copyrights/ianamib.html This MIB module contains managed object definitions for MPLS Traffic Engineering (TE) as defined in: 1. Extensions to RSVP for LSP Tunnels, Awduche et al, RFC 3209, December 2001 2. Constraint-Based LSP Setup using LDP, Jamoussi (Editor), RFC 3212, January 2002 3. Requirements for Traffic Engineering Over MPLS, Awduche, D., Malcolm, J., Agogbua, J., O'Dell, M., and J. McManus, [RFC2702], September 1999
             sleMplsTpTunnelCfg 1.3.6.1.4.1.6296.101.16.14.1
                 sleMplsTpTunnelCfgInfoTable 1.3.6.1.4.1.6296.101.16.14.1.1 no-access
The mplsTunnelTable allows new MPLS tunnels to be created between an LSR and a remote endpoint, and existing tunnels to be reconfigured or removed. Note that only point-to-point tunnel segments are supported, although multipoint-to-point and point- to-multipoint connections are supported by an LSR acting as a cross-connect. Each MPLS tunnel can thus have one out-segment originating at this LSR and/or one in-segment terminating at this LSR.
                     sleMplsTpTunnelCfgInfoEntry 1.3.6.1.4.1.6296.101.16.14.1.1.1 no-access
An entry in this table represents an MPLS tunnel. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signalling protocol. Whenever a new entry is created with mplsTunnelIsIf set to true(1), then a corresponding entry is created in ifTable as well (see RFC 2863). The ifType of this entry is mplsTunnel(150). A tunnel entry needs to be uniquely identified across a MPLS network. Indices mplsTunnelIndex and mplsTunnelInstance uniquely identify a tunnel on the LSR originating the tunnel. To uniquely identify a tunnel across an MPLS network requires index mplsTunnelIngressLSRId. The last index mplsTunnelEgressLSRId is useful in identifying all instances of a tunnel that terminate on the same egress LSR.
                         sleMplsTpTunnelCfgInfoIndex 1.3.6.1.4.1.6296.101.16.14.1.1.1.1 unsigned32 no-access
A unique value which identify an entry in this table.
                         sleMplsTpTunnelCfgInfoName 1.3.6.1.4.1.6296.101.16.14.1.1.1.2 octet string read-only
The canonical name assigned to the tunnel. This name can be used to refer to the tunnel on the LSR's console port. If mplsTunnelIsIf is set to true then the ifName of the interface corresponding to this tunnel should have a value equal to mplsTunnelName. Also see the description of ifName in RFC 2863.
                         sleMplsTpTunnelCfgInfoId 1.3.6.1.4.1.6296.101.16.14.1.1.1.3 unsigned32 read-only
Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by reading mplsTunnelIndexNext. When the MPLS signalling protocol is rsvp(2) this value SHOULD be equal to the value signaled in the Tunnel Id of the Session object. When the MPLS signalling protocol is crldp(3) this value SHOULD be equal to the value signaled in the LSP ID.
                         sleMplsTpTunnelCfgInfoSrcIdType 1.3.6.1.4.1.6296.101.16.14.1.1.1.4 integer read-only
This object is used to set the ietf or itut type. Enumeration: 'ietf': 1, 'itut': 2.
                         sleMplsTpTunnelCfgInfoSrcGId 1.3.6.1.4.1.6296.101.16.14.1.1.1.5 unsigned32 read-only
This Object is used to display the GlobalID of IETF
                         sleMplsTpTunnelCfgInfoSrcCc 1.3.6.1.4.1.6296.101.16.14.1.1.1.6 mplsccid read-only
This Object is used to display the Source CC-ID of ITUT
                         sleMplsTpTunnelCfgInfoSrcIcc 1.3.6.1.4.1.6296.101.16.14.1.1.1.7 mplsiccid read-only
This Object is used to set the Source ICC-ID of ITUT
                         sleMplsTpTunnelCfgInfoSrcNodeId 1.3.6.1.4.1.6296.101.16.14.1.1.1.8 ipaddress read-only
This Object is used to display the Source Node ID of IETF and ITUT
                         sleMplsTpTunnelCfgInfoDestIdType 1.3.6.1.4.1.6296.101.16.14.1.1.1.9 integer read-only
This object is used to set the ietf or itut type. Enumeration: 'ietf': 1, 'itut': 2.
                         sleMplsTpTunnelCfgInfoDestGId 1.3.6.1.4.1.6296.101.16.14.1.1.1.10 unsigned32 read-only
This Object is used to set the Destination GlobalID of IETF
                         sleMplsTpTunnelCfgInfoDestCc 1.3.6.1.4.1.6296.101.16.14.1.1.1.11 mplsccid read-only
This Object is used to display the Destination CC-ID of ITUT
                         sleMplsTpTunnelCfgInfoDestIcc 1.3.6.1.4.1.6296.101.16.14.1.1.1.12 mplsiccid read-only
This Object is used to set the Destination ICC-ID of ITUT
                         sleMplsTpTunnelCfgInfoDestNodeId 1.3.6.1.4.1.6296.101.16.14.1.1.1.13 ipaddress read-only
This Object is used to display the Destination Node ID of IETF and ITUT
                         sleMplsTpTunnelCfgInfoMode 1.3.6.1.4.1.6296.101.16.14.1.1.1.14 integer read-only
This object is used to set the Tunnel Mode Enumeration: 'bidirectional': 2, 'none': 0, 'associate': 4, 'unidirectional': 1, 'corouted': 3.
                         sleMplsTpTunnelCfgInfoFwdInLabel 1.3.6.1.4.1.6296.101.16.14.1.1.1.15 mplslabel read-only
This object is used to display the Forward In Label. The lable range is 0 to 1048575. Here 0 to 15 are reserved labels. User allowed range is 16 to 1048575.. The default value 1048576 is invalid label
                         sleMplsTpTunnelCfgInfoFwdInIfIndex 1.3.6.1.4.1.6296.101.16.14.1.1.1.16 interfaceindexorzero read-only
This object is used to set the Forward IN Interface index
                         sleMplsTpTunnelCfgInfoFwdOperation 1.3.6.1.4.1.6296.101.16.14.1.1.1.17 integer read-only
This object is used to set the Forward Ilm OPeration . Enumeration: 'push': 1, 'none': 0, 'swap': 3, 'pop': 2.
                         sleMplsTpTunnelCfgInfoFwdOutLabel 1.3.6.1.4.1.6296.101.16.14.1.1.1.18 mplslabel read-only
This object is used to display the Forward In Label. The lable range is 0 to 1048575. Here 0 to 15 are reserved labels. User allowed range is 16 to 1048575. The default value 1048576 is invalid label
                         sleMplsTpTunnelCfgInfoFwdOutIfIndex 1.3.6.1.4.1.6296.101.16.14.1.1.1.19 interfaceindexorzero read-only
This object is used to set the Forward OUT Interface index
                         sleMplsTpTunnelCfgInfoFwdOutMac 1.3.6.1.4.1.6296.101.16.14.1.1.1.20 macaddress read-only
This object is used to display the Forward OUT MAC ADDRESS
                         sleMplsTpTunnelCfgInfoRevInLabel 1.3.6.1.4.1.6296.101.16.14.1.1.1.21 mplslabel read-only
This object is used to display the Forward In Label. The lable range is 0 to 1048575. Here 0 to 15 are reserved labels. User allowed range is 16 to 1048575. The default value 1048576 is invalid label
                         sleMplsTpTunnelCfgInfoRevInIfIndex 1.3.6.1.4.1.6296.101.16.14.1.1.1.22 interfaceindexorzero read-only
This object is used to set the Reverse IN Interface index
                         sleMplsTpTunnelCfgInfoRevOperation 1.3.6.1.4.1.6296.101.16.14.1.1.1.23 integer read-only
This object is used to set the Reverse Ilm OPeration . Enumeration: 'push': 1, 'none': 0, 'swap': 3, 'pop': 2.
                         sleMplsTpTunnelCfgInfoRevOutLabel 1.3.6.1.4.1.6296.101.16.14.1.1.1.24 mplslabel read-only
This object is used to display the Forward In Label. The lable range is 0 to 1048575. Here 0 to 15 are reserved labels. User allowed range is 16 to 1048575. The default value 1048576 is invalid label
                         sleMplsTpTunnelCfgInfoRevOutIfIndex 1.3.6.1.4.1.6296.101.16.14.1.1.1.25 interfaceindexorzero read-only
This object is used to set the Reverse OUT Interface index
                         sleMplsTpTunnelCfgInfoRevOutMac 1.3.6.1.4.1.6296.101.16.14.1.1.1.26 macaddress read-only
This object is used to display the Forward OUT MAC ADDRESS .
                         sleMplsTpTunnelCfgInfoState 1.3.6.1.4.1.6296.101.16.14.1.1.1.27 integer read-only
This object is to display status of the tunnel. Enumeration: 'down': 2, 'up': 1.
                         sleMplsTpTunnelCfgInfoRole 1.3.6.1.4.1.6296.101.16.14.1.1.1.28 integer read-only
This object is to display Role of the tunnel. Enumeration: 'source': 0, 'transist': 1, 'destination': 2.
                         sleMplsTpTunnelCfgInfoAssociateTnlName 1.3.6.1.4.1.6296.101.16.14.1.1.1.29 octet string read-only
This object to display associate of reverse tunnel.
                         sleMplsTpTunnelCfgInfoDescription 1.3.6.1.4.1.6296.101.16.14.1.1.1.30 octet string read-only
Description.
                         sleMplsTpTunnelCfgInfoHlspRole 1.3.6.1.4.1.6296.101.16.14.1.1.1.31 integer read-only
This object is used to set the Hlsp Tunnel. whether the tunnel is Server or client. server (1) :- To set the Server Tunnel client(2) :- To set the Client Tunnel . Enumeration: 'client': 2, 'server': 1.
                         sleMplsTpTunnelCfgInfoHlspServerTunnelName 1.3.6.1.4.1.6296.101.16.14.1.1.1.32 octet string read-only
This object is used to set the server TunnelName, when sleMplsTpTunnelCfgControlHlspOption as a client .
                         sleMplsTpTunnelCfgInfoQosPolicyName 1.3.6.1.4.1.6296.101.16.14.1.1.1.33 octet string read-only
This object is used to set the Qos Policy name.
                 sleMplsTpTunnelCfgControl 1.3.6.1.4.1.6296.101.16.14.1.2
                     sleMplsTpTunnelCfgControlRequest 1.3.6.1.4.1.6296.101.16.14.1.2.1 integer read-write
This object holds the possible read-write columns that can be modified in the Tunnel table. For each read-write column of Tunnel table, a Set Operation controlvalue is added in this object. Enumeration: 'unsetIlmSwap': 10, 'setDescription': 12, 'setNhlfe': 4, 'unsetHlspServerLsp': 15, 'createMplsTpTunnelEntry': 1, 'setTunnelQosPolicyName': 17, 'setMplsTpTunnelMode': 3, 'unsetNhlfe': 8, 'setIlmSwap': 6, 'deleteMplsTpTunnelEntry': 2, 'unsetIlmPop': 9, 'setHlspServerLsp': 13, 'setAssociateTunnel': 7, 'unsetHlspClientLsp': 16, 'unsetTunnelQosPolicyName': 18, 'setIlmPop': 5, 'setHlspClientLsp': 14, 'unsetAssociateTunnel': 11.
                     sleMplsTpTunnelCfgControlStatus 1.3.6.1.4.1.6296.101.16.14.1.2.2 slecontrolstatustype read-only
This object displays the status of the configuration done.
                     sleMplsTpTunnelCfgControlTimer 1.3.6.1.4.1.6296.101.16.14.1.2.3 gauge32 read-write
This object is based on the SLE style where a timer is configured for every control table.
                     sleMplsTpTunnelCfgControlTimeStamp 1.3.6.1.4.1.6296.101.16.14.1.2.4 timeticks read-only
This object specifies the time at which the configuration is done.
                     sleMplsTpTunnelCfgControlReqResult 1.3.6.1.4.1.6296.101.16.14.1.2.5 slecontrolrequestresulttype read-only
The standard result of the SET operation is stored here.
                     sleMplsTpTunnelCfgControlName 1.3.6.1.4.1.6296.101.16.14.1.2.6 octet string read-write
The canonical name assigned to the tunnel. This name can be used to refer to the tunnel on the LSR's console port. If mplsTunnelIsIf is set to true then the ifName of the interface corresponding to this tunnel should have a value equal to SlemplsTunnelName. Also see the description of ifName in RFC 2863.
                     sleMplsTpTunnelCfgControlId 1.3.6.1.4.1.6296.101.16.14.1.2.7 unsigned32 read-write
This object is used to set the tunnel Id .
                     sleMplsTpTunnelCfgControlSrcIdType 1.3.6.1.4.1.6296.101.16.14.1.2.8 integer read-write
This object is used to set the ietf or itut type. Enumeration: 'ietf': 1, 'itut': 2.
                     sleMplsTpTunnelCfgControlSrcGId 1.3.6.1.4.1.6296.101.16.14.1.2.9 unsigned32 read-write
This object is used to set the source Global-Id for IETF .
                     sleMplsTpTunnelCfgControlSrcCc 1.3.6.1.4.1.6296.101.16.14.1.2.10 mplsccid read-write
This object is used to set the source CC-ID for ITUT.
                     sleMplsTpTunnelCfgControlSrcIcc 1.3.6.1.4.1.6296.101.16.14.1.2.11 mplsiccid read-write
This object is used to set the Source ICC-ID for ITUT.
                     sleMplsTpTunnelCfgControlSrcNodeId 1.3.6.1.4.1.6296.101.16.14.1.2.12 ipaddress read-write
This object is used to set the Source Node-Id for IETF and ITUT
                     sleMplsTpTunnelCfgControlDestIdType 1.3.6.1.4.1.6296.101.16.14.1.2.13 integer read-write
This object is used to set the ietf or itut type. Enumeration: 'ietf': 1, 'itut': 2.
                     sleMplsTpTunnelCfgControlDestGId 1.3.6.1.4.1.6296.101.16.14.1.2.14 unsigned32 read-write
This object is used to set the Destination Global-Id for IETF .
                     sleMplsTpTunnelCfgControlDestCc 1.3.6.1.4.1.6296.101.16.14.1.2.15 mplsccid read-write
This object is used to set the Destination CC-ID for ITUT.
                     sleMplsTpTunnelCfgControlDestIcc 1.3.6.1.4.1.6296.101.16.14.1.2.16 mplsiccid read-write
This object is used to set the Destination ICC-ID for ITUT.
                     sleMplsTpTunnelCfgControlDestNodeId 1.3.6.1.4.1.6296.101.16.14.1.2.17 ipaddress read-write
This object is used to set the Destination NodeID for IETF and ITUT.
                     sleMplsTpTunnelCfgControlMode 1.3.6.1.4.1.6296.101.16.14.1.2.18 integer read-write
This object is used to set the Tunnel mode . Enumeration: 'bidirectional': 2, 'unidirectional': 1.
                     sleMplsTpTunnelCfgControlPath 1.3.6.1.4.1.6296.101.16.14.1.2.19 integer read-write
This object is used to Set the forward path and reverse path tunnel. Enumeration: 'forwardPath': 1, 'reversePath': 2.
                     sleMplsTpTunnelCfgControlInLabel 1.3.6.1.4.1.6296.101.16.14.1.2.20 mplslabel read-write
This object is used to set the Inlabel.
                     sleMplsTpTunnelCfgControlInInterface 1.3.6.1.4.1.6296.101.16.14.1.2.21 interfaceindexorzero read-write
This object is used to set the Ininterface index.
                     sleMplsTpTunnelCfgControlOperation 1.3.6.1.4.1.6296.101.16.14.1.2.22 integer read-write
This object is used to set the operation of Tuunel Enumeration: 'push': 1, 'swap': 3, 'pop': 2.
                     sleMplsTpTunnelCfgControlOutLabel 1.3.6.1.4.1.6296.101.16.14.1.2.23 mplslabel read-write
This object is used to set the outlabel.
                     sleMplsTpTunnelCfgControlOutInterface 1.3.6.1.4.1.6296.101.16.14.1.2.24 interfaceindexorzero read-write
This object is used to set the outerinterface index.
                     sleMplsTpTunnelCfgControlOutMacAddress 1.3.6.1.4.1.6296.101.16.14.1.2.25 macaddress read-write
This object is used to Set the Out MacAddress .
                     sleMplsTpTunnelCfgControlAssociateTnlName 1.3.6.1.4.1.6296.101.16.14.1.2.26 octet string read-write
This object is used to Associated Forward tunnel and reverse tunnel with reverse tunnel name .
                     sleMplsTpTunnelCfgControlDescription 1.3.6.1.4.1.6296.101.16.14.1.2.27 octet string read-write
Description.
                     sleMplsTpTunnelCfgControlHlspSeverTunnelName 1.3.6.1.4.1.6296.101.16.14.1.2.28 octet string read-write
This object is used to set the server Tunnel name for associating server and client.
                     sleMplsTpTunnelCfgControlQosPolicyName 1.3.6.1.4.1.6296.101.16.14.1.2.29 octet string read-write
This object is used to set the Qos Policy name.