SL-SECU-MIB: View SNMP OID List / Download MIB

VENDOR: PACKETLIGHT NETWORKS LTD.


 Home MIB: SL-SECU-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, SL-MAIN-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 slSecuMib 1.3.6.1.4.1.4515.1.3.24
This security module. This mib is used to configure the firewall.
       slSecuGen 1.3.6.1.4.1.4515.1.3.24.1
           slSecuFirewallEnable 1.3.6.1.4.1.4515.1.3.24.1.1
General Enable/Disable of the firewall operation.
       slSecuSelect 1.3.6.1.4.1.4515.1.3.24.2
           slSecuSelectTable 1.3.6.1.4.1.4515.1.3.24.2.1
The security protocol selection table.
               slSecuSelectEntry 1.3.6.1.4.1.4515.1.3.24.2.1.1
An entry in the security selection table.
                   slSecuSelectType 1.3.6.1.4.1.4515.1.3.24.2.1.1.1
The secutity protocol type
                   slSecuSelectPort 1.3.6.1.4.1.4515.1.3.24.2.1.1.2
The corresponding port number of the protocol. Port number 0 is used when not applicable/available.
                   slSecuSelectEnable 1.3.6.1.4.1.4515.1.3.24.2.1.1.3
True - Enables the firewall for the corresponding protocol. False - Dsables the firewall for the corresponding protocol. When enabled the firewall blocks the protocol.
       slSecuWl 1.3.6.1.4.1.4515.1.3.24.3
           slSecuWlTable 1.3.6.1.4.1.4515.1.3.24.3.1
This white list table.
               slSecuWlEntry 1.3.6.1.4.1.4515.1.3.24.3.1.1
A particular IP address.
                   slSecuWlIp 1.3.6.1.4.1.4515.1.3.24.3.1.1.1
The IP address to allow
                   slSecuWlMask 1.3.6.1.4.1.4515.1.3.24.3.1.1.2
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the slSecuWlIp field.
                   slSecuWlStatus 1.3.6.1.4.1.4515.1.3.24.3.1.1.3
The row status variable, used according to row installation and removal conventions.
       slSecuEncryption 1.3.6.1.4.1.4515.1.3.24.4
           slSecuEncryptionTable 1.3.6.1.4.1.4515.1.3.24.4.1
The encryption table. This table has an entry per transponder.
               slSecuEncryptionEntry 1.3.6.1.4.1.4515.1.3.24.4.1.1
This entry is used to control the necryption per transponder.
                   slSecuEncryptionIfIndex 1.3.6.1.4.1.4515.1.3.24.4.1.1.1
The Interface Index of the uplink port.
                   slSecuEncryptionEnable 1.3.6.1.4.1.4515.1.3.24.4.1.1.2
Enable/Disable the encryption on this uplink.
                   slSecuEncryptionStatus 1.3.6.1.4.1.4515.1.3.24.4.1.1.3
The state of the encryption finite state machine.
                   slSecuEncryptionForceInit 1.3.6.1.4.1.4515.1.3.24.4.1.1.4
Writing this valiable forces init to the encryption state machine.
                   slSecuEncryptionPreShared 1.3.6.1.4.1.4515.1.3.24.4.1.1.5
The pre-shared secret. Either the pre-shared key, or the shared secret to avoid Mitm when using DH public key exchange.
                   slSecuEncryptionKeyExchangePeriod 1.3.6.1.4.1.4515.1.3.24.4.1.1.6
The Key Exchage Period, specified in minutes. The value 0 means to perform the key exchange only once at link establishment.