SINGLE-IP-MIB: View SNMP OID List / Download MIB

VENDOR: D-LINK


 Home MIB: SINGLE-IP-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, DLINK-ID-REC-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 swSingleIPMIB 1.3.6.1.4.1.171.12.8
The Single IP management MIB.
     swSingleIPMgmt 1.3.6.1.4.1.171.12.8.1
         swSingleIPInfo 1.3.6.1.4.1.171.12.8.1.1
             swSingleIPVersion 1.3.6.1.4.1.171.12.8.1.1.1 displaystring read-only
This object indicates the version of single IP management supported in the system.
             swSingleIPCapability 1.3.6.1.4.1.171.12.8.1.1.2 displaystring read-only
This object indicates the capability of the switch system.
             swSingleIPPlatform 1.3.6.1.4.1.171.12.8.1.1.3 displaystring read-only
This object indicates the platform of the switch system.
         swSingleIPCtrl 1.3.6.1.4.1.171.12.8.1.2
             swSingleIPAdmin 1.3.6.1.4.1.171.12.8.1.2.1 integer read-write
This object indicates Single IP management is enabled or disabled on the system. Enumeration: 'disabled': 2, 'other': 1, 'enabled': 3.
             swSingleIPRoleState 1.3.6.1.4.1.171.12.8.1.2.2 integer read-write
This object indicates the role state of the switch system. Enumeration: 'cs': 1, 'cas': 2, 'ms': 3.
             swSingleIPHoldtime 1.3.6.1.4.1.171.12.8.1.2.3 integer read-write
This object indicate the holdtime of the switch in second . default value is 180 , maximum value is 255 , minimum value is 100.
             swSingleIPTimeInterval 1.3.6.1.4.1.171.12.8.1.2.4 integer read-write
This object indicate the time interval of the switch in second to periodical send out Single IP protocol control packet. default value is 60 , maximum value is 120 , minimum value is 30 . The swSingleIPTimeInterval will always <= swSingleIPHoldtime/2
         swSingleIPMSTable 1.3.6.1.4.1.171.12.8.1.3 no-access
This table contain information of member switchs which belong to the single IP management group . A member will be joined into the group by row creation . Before a switch joined into a group as a member switch , it must exist in the candidate table list .
             swSingleIPMSEntry 1.3.6.1.4.1.171.12.8.1.3.1 no-access
A list of information about member switchs belongs to the single IP management group.
                 swSingleIPMSID 1.3.6.1.4.1.171.12.8.1.3.1.1 integer read-only
The ID of the member switch. When create a SwSingleIPMSEntry entry, this object should fill a value between 1 to 32, but will not be used during create process(Note: The MS-ID is assigned by SingleIP engine). The value of this object will be the correct member ID when query/read.
                 swSingleIPMSDeviceName 1.3.6.1.4.1.171.12.8.1.3.1.2 displaystring read-only
Specifies that the name of switch .
                 swSingleIPMSMacAddr 1.3.6.1.4.1.171.12.8.1.3.1.3 macaddress read-only
This object Specifies the MAC address of the member switch.
                 swSingleIPMSFirmwareVer 1.3.6.1.4.1.171.12.8.1.3.1.4 displaystring read-only
Specifies the firmware version of the switch .
                 swSingleIPMSCapability 1.3.6.1.4.1.171.12.8.1.3.1.5 displaystring read-only
Specifies the Capability of the switch .
                 swSingleIPMSPlatform 1.3.6.1.4.1.171.12.8.1.3.1.6 displaystring read-only
Specifies the platform of the switch .
                 swSingleIPMSHoldtime 1.3.6.1.4.1.171.12.8.1.3.1.7 integer read-only
Specifies the holdtime of Single IP management ptotocol send by this member switch .
                 swSingleIPMSCasSource 1.3.6.1.4.1.171.12.8.1.3.1.8 integer read-only
Specifies the CaS id when create MS entry. The object is used only when create swSingleIPMSEntry. The value always shows 0.
                 swSingleIPMSPassword 1.3.6.1.4.1.171.12.8.1.3.1.9 octet string read-only
Specifies the Cas password when create MS entry. The object is used only when create swSingleIPMSEntry. The value always shows zero length string.
                 swSingleIPMSRowStatus 1.3.6.1.4.1.171.12.8.1.3.1.10 rowstatus read-only
This object indicates the status of this entry. Create means set CaS to MS, and DESTROY means set MS to CaS
         swSingleIPCaSTable 1.3.6.1.4.1.171.12.8.1.4 no-access
This table contain information of candidate switchs. This table is a read only table list ,all information about candidate switchs will maintain automatically by Single IP topology discovery protocol .
             swSingleIPCaSEntry 1.3.6.1.4.1.171.12.8.1.4.1 no-access
A list of information about candidate switchs belongs to the single IP management group.
                 swSingleIPCaSID 1.3.6.1.4.1.171.12.8.1.4.1.1 integer read-only
The ID of the candidate switchs in the LAN learned by the command switch .
                 swSingleIPCaSDeviceName 1.3.6.1.4.1.171.12.8.1.4.1.2 displaystring read-only
Specifies that the name of switch .
                 swSingleIPCaSMacAddr 1.3.6.1.4.1.171.12.8.1.4.1.3 macaddress read-only
This object Specifies the MAC address of the candidate switch.
                 swSingleIPCaSFirmwareVer 1.3.6.1.4.1.171.12.8.1.4.1.4 displaystring read-only
Specifies the firmware version of the switch .
                 swSingleIPCaSCapability 1.3.6.1.4.1.171.12.8.1.4.1.5 displaystring read-only
Specifies the Capability of the switch .
                 swSingleIPCaSPlatform 1.3.6.1.4.1.171.12.8.1.4.1.6 displaystring read-only
Specifies the platform of the switch .
                 swSingleIPCaSHoldtime 1.3.6.1.4.1.171.12.8.1.4.1.7 integer read-only
Specifies the holdtime of Single IP management ptotocol send by this candidate switch .
         swSingleIPGroupTable 1.3.6.1.4.1.171.12.8.1.5 no-access
This table contain information of Single IP manaement groups learned by the Command switch . This table is a read only table list ,all information about Single IP groups will maintain automatically by Single IP topology discovery protocol .
             swSingleIPGroupEntry 1.3.6.1.4.1.171.12.8.1.5.1 no-access
A list of information about single IP management groups.
                 swSingleIPGroupMacAddr 1.3.6.1.4.1.171.12.8.1.5.1.1 macaddress read-only
This object Specifies the MAC address of the command switch.
                 swSingleIPGroupName 1.3.6.1.4.1.171.12.8.1.5.1.2 displaystring read-only
Specifies that the name of the Single IP management group .
                 swSingleIPGroupDeviceName 1.3.6.1.4.1.171.12.8.1.5.1.3 displaystring read-only
Specifies that the name of command switch of the group .
                 swSingleIPGroupMSNumber 1.3.6.1.4.1.171.12.8.1.5.1.4 integer read-only
Specifies the member switch number of the group .
                 swSingleIPGroupFirmwareVer 1.3.6.1.4.1.171.12.8.1.5.1.5 displaystring read-only
Specifies the firmware version of the switch .
                 swSingleIPGroupCapability 1.3.6.1.4.1.171.12.8.1.5.1.6 displaystring read-only
Specifies the Capability of the switch .
                 swSingleIPGroupPlatform 1.3.6.1.4.1.171.12.8.1.5.1.7 displaystring read-only
Specifies the platform of the switch .
                 swSingleIPGroupHoldtime 1.3.6.1.4.1.171.12.8.1.5.1.8 integer read-only
Specifies the holdtime of Single IP management ptotocol send by this command switch .
         swSingleIPNeighborTable 1.3.6.1.4.1.171.12.8.1.6 no-access
This table contain information of Single IP manaement Neighbors learned by the switch . This table is a read only table list ,all information about Single IP Neighbors will maintain automatically by Single IP topology protocol .
             swSingleIPNeighborEntry 1.3.6.1.4.1.171.12.8.1.6.1 no-access
A list of information about single IP management Neighbors.
                 swSingleIPNBReceivedPort 1.3.6.1.4.1.171.12.8.1.6.1.1 integer read-only
Specifies the received port of the Neighbor switch.
                 swSingleIPNBMacAddr 1.3.6.1.4.1.171.12.8.1.6.1.2 macaddress read-only
This object Specifies the MAC address of the Neighbor switch.
                 swSingleIPNBRoleState 1.3.6.1.4.1.171.12.8.1.6.1.3 integer read-only
This object Specifies the role state of the Neighbor switch. Enumeration: 'member': 3, 'candidate': 2, 'commander': 1.
     singleIPMSNotify 1.3.6.1.4.1.171.12.8.6
         singleIPMSNotifyPrefix 1.3.6.1.4.1.171.12.8.6.0
             swSingleIPMSColdStart 1.3.6.1.4.1.171.12.8.6.0.11
Commander switch will send swSingleIPMSColdStart notification to indicated host when its Member generate cold start notification.
             swSingleIPMSWarmStart 1.3.6.1.4.1.171.12.8.6.0.12
Commander switch will send swSingleIPMSWarmStart notification to indicated host when its Member generate warm start notification.
             swSingleIPMSLinkDown 1.3.6.1.4.1.171.12.8.6.0.13
Commander switch will send swSingleIPMSLinkDown notification to indicated host when its Member generate link down notification.
             swSingleIPMSLinkUp 1.3.6.1.4.1.171.12.8.6.0.14
If Commander switch will send swSingleIPMSLinkUp notification to indicated host when its Member generate link up notification.
             swSingleIPMSAuthFail 1.3.6.1.4.1.171.12.8.6.0.15
Commander switch will send swSingleIPMSAuthFail notification to indicated host when it Member generate authentation failure notification.
             swSingleIPMSnewRoot 1.3.6.1.4.1.171.12.8.6.0.16
Commander switch will send swSingleIPMSnewRoot notification to indicated host when it Member generate new root notification.
             swSingleIPMSTopologyChange 1.3.6.1.4.1.171.12.8.6.0.17
Commander switch will send swSingleIPMSTopologyChange notification to indicated host when it Member generate topology chnage notification.
             swSingleIPMSrisingAlarm 1.3.6.1.4.1.171.12.8.6.0.18
Commander switch will send swSingleIPMSrisingAlarm notification to indicated host when it Member generate rising Alarm notification.
             swSingleIPMSfallingAlarm 1.3.6.1.4.1.171.12.8.6.0.19
Commander switch will send swSingleIPMSfallingAlarm notification to indicated host when it Member generate falling Alarm notification.
             swSingleIPMSmacNotification 1.3.6.1.4.1.171.12.8.6.0.20
Commander switch will send swSingleIPMSmacNotification notification to indicated host when it Member generate mac addresses variation notification.
             swSingleIPMSPortTypeChange 1.3.6.1.4.1.171.12.8.6.0.21
Commander switch will send swSingleIPMSPortTypeChange notification to indicated host when it Member generate port type change notification.
             swSingleIPMSPowerStatusChg 1.3.6.1.4.1.171.12.8.6.0.22
Commander switch will send swSingleIPMSPowerStatusChg notification to indicated host when it Member generate Power Status change notification.
             swSingleIPMSPowerFailure 1.3.6.1.4.1.171.12.8.6.0.23
Commander switch will send swSingleIPMSPowerFailure notification to indicated host when it Member generate Power Failure notification.
             swSingleIPMSPowerRecover 1.3.6.1.4.1.171.12.8.6.0.24
Commander switch will send swSingleIPMSPowerRecover notification to indicated host when it Member generate Power Recover notification.
         singleIPNotifyBidings 1.3.6.1.4.1.171.12.8.6.1
             swSingleIPMSTrapMessage 1.3.6.1.4.1.171.12.8.6.1.1 octet string read-only
The string that member switch sent.