SIEMENS-PN-MIB: View SNMP OID List / Download MIB

VENDOR: SIEMENS


 Home MIB: SIEMENS-PN-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 sni 1.3.6.1.4.1.231
         siemensUnits 1.3.6.1.4.1.231.7
             pn 1.3.6.1.4.1.231.7.2
                 hicomMib 1.3.6.1.4.1.231.7.2.1
This is the MIB for Siemens 300 Hicom PBX and UNITY systems. It includes topology and system management, alarm management and hard/software management.
                     hicomControl 1.3.6.1.4.1.231.7.2.1.0
                         hicomProxyName 1.3.6.1.4.1.231.7.2.1.0.1 displaystring read-only
Name of the Hicom proxy agent.
                         hicomAgentVersion 1.3.6.1.4.1.231.7.2.1.0.2 displaystring read-only
Version of the Hicom proxy agent.
                         hicomMIBVersion 1.3.6.1.4.1.231.7.2.1.0.3 displaystring read-only
MIB Version of the Hicom proxy agent.
                     hicomSystem 1.3.6.1.4.1.231.7.2.1.1
                         hicomNumHicoms 1.3.6.1.4.1.231.7.2.1.1.1 integer32 read-only
The number of Hicom systems managed by this agent.
                         hicomSystemChanges 1.3.6.1.4.1.231.7.2.1.1.2 counter32 read-only
When a change (SET) is made on hicomSysTable or hicomForeignSysTable, the variable is incremented by one.
                         hicomSysTable 1.3.6.1.4.1.231.7.2.1.1.3 no-access
The table of Hicom systems.
                             hicomSysEntry 1.3.6.1.4.1.231.7.2.1.1.3.1 no-access
Each entry describes a Hicom system.
                                 hicomSysPabxId 1.3.6.1.4.1.231.7.2.1.1.3.1.1 integer32 read-only
Unique identifier of a Hicom system.
                                 hicomSysConNo 1.3.6.1.4.1.231.7.2.1.1.3.1.2 displaystring read-only
Customer contract number.
                                 hicomSysEstabl 1.3.6.1.4.1.231.7.2.1.1.3.1.3 integer32 read-only
Contract (2.-3.)
                                 hicomSysPosNo 1.3.6.1.4.1.231.7.2.1.1.3.1.4 displaystring read-only
Contract (10.-14)
                                 hicomSysMnemonic 1.3.6.1.4.1.231.7.2.1.1.3.1.5 displaystring read-only
Mnemonic name of the Hicom system.
                                 hicomSysCustName 1.3.6.1.4.1.231.7.2.1.1.3.1.6 displaystring read-only
Name of the service technician.
                                 hicomSysCbCode 1.3.6.1.4.1.231.7.2.1.1.3.1.7 displaystring read-only
Call back
                                 hicomSysTelNo 1.3.6.1.4.1.231.7.2.1.1.3.1.8 displaystring read-only
Call number of the customer.
                                 hicomSysCutOver 1.3.6.1.4.1.231.7.2.1.1.3.1.9 displaystring read-only
CutOver date for Hicom.
                                 hicomSysClnr 1.3.6.1.4.1.231.7.2.1.1.3.1.11 displaystring read-only
Call number of the Hicom service.
                                 hicomSysPabxNo 1.3.6.1.4.1.231.7.2.1.1.3.1.12 displaystring read-only
Chdmain pabx-no field.
                                 hicomSysLocation 1.3.6.1.4.1.231.7.2.1.1.3.1.13 displaystring read-only
Location of the Hicom system.
                                 hicomSysRemark 1.3.6.1.4.1.231.7.2.1.1.3.1.14 displaystring read-only
Optional remarks.
                                 hicomSysSwLic 1.3.6.1.4.1.231.7.2.1.1.3.1.15 displaystring read-only
Software licence number.
                                 hicomSysSysType 1.3.6.1.4.1.231.7.2.1.1.3.1.16 displaystring read-only
Type of equipment.
                                 hicomSysApsPa 1.3.6.1.4.1.231.7.2.1.1.3.1.17 displaystring read-only
Chdmain aps-pa field.
                                 hicomSysTimeStamp 1.3.6.1.4.1.231.7.2.1.1.3.1.26 integer32 read-only
Chdmain timstamp field.
                                 hicomSysDescription 1.3.6.1.4.1.231.7.2.1.1.3.1.34 displaystring read-only
Chdmain longname field.
                                 hicomSysVersion 1.3.6.1.4.1.231.7.2.1.1.3.1.39 displaystring read-only
Installed version of the Hicom system.
                                 hicomSysCustomerSpecific 1.3.6.1.4.1.231.7.2.1.1.3.1.44 displaystring read-only
Chdmain customer-specific field.
                                 hicomSysStreetAddress 1.3.6.1.4.1.231.7.2.1.1.3.1.45 displaystring read-only
Chdmain street-address field.
                                 hicomSysLineType 1.3.6.1.4.1.231.7.2.1.1.3.1.46 displaystring read-only
Chdmain line-type field.
                                 hicomSysProduct 1.3.6.1.4.1.231.7.2.1.1.3.1.48 displaystring read-only
Chdmain product field.
                                 hicomSysCustomerContact 1.3.6.1.4.1.231.7.2.1.1.3.1.49 displaystring read-only
Chdmain customer-contact field.
                                 hicomSysServiceDistrict 1.3.6.1.4.1.231.7.2.1.1.3.1.50 displaystring read-only
Chdmain service-district field.
                                 hicomSysCustomerContract 1.3.6.1.4.1.231.7.2.1.1.3.1.51 displaystring read-only
Chdmain customer-contract field.
                                 hicomSysTimeOfLastFm 1.3.6.1.4.1.231.7.2.1.1.3.1.53 integer32 read-only
Chdmain time-of-last-fm field.
                                 hicomSysHicomSwVersion 1.3.6.1.4.1.231.7.2.1.1.3.1.55 displaystring read-only
Chdmain hicom-sw-version field.
                                 hicomSysEndWarranty 1.3.6.1.4.1.231.7.2.1.1.3.1.58 displaystring read-only
Chdmain end-warranty field.
                                 hicomSysBatteryType 1.3.6.1.4.1.231.7.2.1.1.3.1.61 displaystring read-only
Chdmain battery-type field.
                                 hicomSysBatteryCapac 1.3.6.1.4.1.231.7.2.1.1.3.1.62 displaystring read-only
Chdmain battery-capacity field.
                                 hicomSysInterface 1.3.6.1.4.1.231.7.2.1.1.3.1.63 displaystring read-only
Chdmain interface field.
                                 hicomSysSystemRoomTel 1.3.6.1.4.1.231.7.2.1.1.3.1.64 displaystring read-only
Chdmain system-room-tel field.
                                 hicomSysNoType 1.3.6.1.4.1.231.7.2.1.1.3.1.71 displaystring read-only
Network Object icon default display name.
                                 hicomSysCustServer 1.3.6.1.4.1.231.7.2.1.1.3.1.72 displaystring read-only
Network Object ID (mnemonic) of the Network Manager Unity A&S server.
                                 hicomSysCustNoid 1.3.6.1.4.1.231.7.2.1.1.3.1.73 displaystring read-only
NOId (mnemonic) of the uploaded NO (H300) in customer server.
                                 hicomSysNoName 1.3.6.1.4.1.231.7.2.1.1.3.1.74 displaystring read-only
Network Object icon default display name.
                                 hicomSysRemarkCd 1.3.6.1.4.1.231.7.2.1.1.3.1.75 displaystring read-only
remarks to customer data.
                                 hicomSysHSystemRelease 1.3.6.1.4.1.231.7.2.1.1.3.1.76 displaystring read-only
Sachnummer of resident SWU (switching unit) APS (Anlagen Programm System).
                                 hicomSysHcmAmolang 1.3.6.1.4.1.231.7.2.1.1.3.1.77 displaystring read-only
AMO language 1=de 2=en .
                                 hicomSysRemarkCon 1.3.6.1.4.1.231.7.2.1.1.3.1.78 displaystring read-only
Remarks to contract data.
                                 hicomSysIpAddress 1.3.6.1.4.1.231.7.2.1.1.3.1.79 displaystring read-only
IP address or DNS entry of Hicom/Network Object.
                                 hicomSysRemarkCom 1.3.6.1.4.1.231.7.2.1.1.3.1.80 displaystring read-only
Remarks to communication.
                                 hicomSysMsvProgNum 1.3.6.1.4.1.231.7.2.1.1.3.1.81 integer32 read-only
This Hicom number is needed for MSVx connectivity over dial up or leased lines, generated.
                                 hicomSysMsvRegNum 1.3.6.1.4.1.231.7.2.1.1.3.1.82 integer32 read-only
This region number is needed for MSVx connectivity over dial up or leased lines, generated (Teilnetz Id).
                                 hicomSysHcEquipNr1 1.3.6.1.4.1.231.7.2.1.1.3.1.83 displaystring read-only
First part of the hicom equipment number, SP(Systemprogramm) Sachnummer 1.
                                 hicomSysHcEquipNr2 1.3.6.1.4.1.231.7.2.1.1.3.1.84 displaystring read-only
Secon part of the hicom equipment number, SP(Systemprogramm) Sachnummmer 2.
                                 hicomSysDaUrl 1.3.6.1.4.1.231.7.2.1.1.3.1.85 displaystring read-only
URL for Web based DA application.
                                 hicomSysHcmCorrState 1.3.6.1.4.1.231.7.2.1.1.3.1.86 displaystring read-only
Correction State of the Hicom (Patches/APS).
                                 hicomSysNodeNo 1.3.6.1.4.1.231.7.2.1.1.3.1.100 integer32 read-only
Node number of the Hicom system.
                                 hicomSysLang 1.3.6.1.4.1.231.7.2.1.1.3.1.101 integer read-only
Configured system language. Enumeration: 'german': 2, 'undef': 1, 'english': 3.
                                 hicomSysMgrNetId 1.3.6.1.4.1.231.7.2.1.1.3.1.102 octet string read-write
Identifier of the customer network. The field is set and maintained by the manager application.
                                 hicomSysMgrSubNetId 1.3.6.1.4.1.231.7.2.1.1.3.1.103 octet string read-write
Identifier of the customer's sub-network. The field is set and maintained by the manager application.
                                 hicomSysMgrPhysNetId 1.3.6.1.4.1.231.7.2.1.1.3.1.104 octet string read-write
Identifier of a customer's physical network. The field is set and maintained by the manager application.
                                 hicomSysMgrFlags 1.3.6.1.4.1.231.7.2.1.1.3.1.105 integer32 read-write
Private flags of manager application. The field is set and maintained by the manager application.
                                 hicomSysDiscTimeOutEvnt 1.3.6.1.4.1.231.7.2.1.1.3.1.106 integer read-write
Acceptable maximum time interval (unit is hours) not getting an event from the hicom system. E1: (DiscTimeOutEvnt < t1 - t2) t1 = current Time t2 = Time of last Event If the expression E1 becomes true a discovery operation will started for the hicom. DiscTimeOutEvnt shall be set greater or equal to 24 hours. The field is set and maintained by the manager application.
                                 hicomSysDiscAgedData 1.3.6.1.4.1.231.7.2.1.1.3.1.107 integer read-write
Acceptable maximum time interval (unit is hours) since last discovery date and current event date. E2: (DiscAgedData < t1 - t2) t1 = current Event Time t2 = time last discovery succeeded If the expression E2 becomes true a discovery operation will started for the hicom. DiscAgedData shall be set greater or equal to 168 hours (7 days). The field is set and maintained by the manager application.
                                 hicomSysDiscComType 1.3.6.1.4.1.231.7.2.1.1.3.1.108 integer read-write
Identifies the communication interface between DMS and Hicom. Enumeration: 'online': 2, 'addBatchJob': 1.
                                 hicomSysAgentFlags 1.3.6.1.4.1.231.7.2.1.1.3.1.109 integer32 read-write
Private flags of the Agent. The field is set and maintained by the manager/agent application.
                         hicomSysSubagentLastMsgNo 1.3.6.1.4.1.231.7.2.1.1.4 integer32 read-only
The last message, warning or error number issued by the Alarm subagent.
                         hicomSysSubagentLastMsgText 1.3.6.1.4.1.231.7.2.1.1.5 displaystring read-only
The last message, warning or error text issued by the Alarm subagent.
                         hicomForeignSysTable 1.3.6.1.4.1.231.7.2.1.1.6 no-access
The table describes foreign systems connected to the Hicom network. The content of the table is created and maintained by the manager application.
                             hicomForeignSysEntry 1.3.6.1.4.1.231.7.2.1.1.6.1 no-access
Each entry describes a foreing system connected to the Hicom network.
                                 hicomForSysPhysNetId 1.3.6.1.4.1.231.7.2.1.1.6.1.1 octet string no-access
Physical net identification of the foreign system.
                                 hicomForSysNodeNo 1.3.6.1.4.1.231.7.2.1.1.6.1.2 integer32 no-access
Node number (physical net) of the foreign system.
                                 hicomForSysName 1.3.6.1.4.1.231.7.2.1.1.6.1.3 octet string read-only
Name of the foreign system.
                                 hicomForSysNetId 1.3.6.1.4.1.231.7.2.1.1.6.1.4 octet string read-only
Identifier of the network to which the foreign system belongs.
                                 hicomForSysSubNetId 1.3.6.1.4.1.231.7.2.1.1.6.1.5 octet string read-only
Identifier of the sub network to which the foreign system belongs.
                                 hicomForSysProvNetId 1.3.6.1.4.1.231.7.2.1.1.6.1.6 octet string read-only
Net identifier of the provider network the foreign system belongs to.
                                 hicomForSysProvSubNetId 1.3.6.1.4.1.231.7.2.1.1.6.1.7 octet string read-only
Subnet identifier of the provider network the foreign system belongs to.
                                 hicomForSysRowStat 1.3.6.1.4.1.231.7.2.1.1.6.1.8 rowstatus read-only
Setting a non-existing RowStat variable to 'createAndGo', creates a new row. If creation was successful, the row gets the status 'active'. Variables of an 'active' row can be read and modified. Setting RowStat to 'destroy' effects the deletion of the row.
                     hicomAlarms 1.3.6.1.4.1.231.7.2.1.2
                         hicomAlarmsChanges 1.3.6.1.4.1.231.7.2.1.2.1 counter32 read-only
Is incremented when an alarm SET or RESET trap has been sent by the agent.
                         hicomAlTable 1.3.6.1.4.1.231.7.2.1.2.2 no-access
The table of all Hicom alarms.
                             hicomAlEntry 1.3.6.1.4.1.231.7.2.1.2.2.1 no-access
Each entry describes a Hicom alarm in detail.
                                 hicomAlFilter 1.3.6.1.4.1.231.7.2.1.2.2.1.1 alarmfilterstates read-only
Alarm filter status.
                                 hicomAlStatus 1.3.6.1.4.1.231.7.2.1.2.2.1.2 integer read-only
Status of an alarm. Enumeration: 'reset': 1, 'set': 2.
                                 hicomAlPabxId 1.3.6.1.4.1.231.7.2.1.2.2.1.3 integer32 read-only
Unique identifier of a Hicom system.
                                 hicomAlGroup 1.3.6.1.4.1.231.7.2.1.2.2.1.4 integer32 read-only
Group identifier of a Hicom alarm.
                                 hicomAlSubId 1.3.6.1.4.1.231.7.2.1.2.2.1.5 integer32 read-only
Sub-identifier of a Hicom alarm within its group.
                                 hicomAlPriority 1.3.6.1.4.1.231.7.2.1.2.2.1.6 alarmpriorities read-only
Priority of a Hicom alarm.
                                 hicomAlAbsMod 1.3.6.1.4.1.231.7.2.1.2.2.1.7 displaystring read-only
Hicom module detecting the Hicom alarm.
                                 hicomAlTimDat 1.3.6.1.4.1.231.7.2.1.2.2.1.8 integer32 read-only
Date and time of the Hicom alarm.
                                 hicomAlName 1.3.6.1.4.1.231.7.2.1.2.2.1.9 displaystring read-only
Name of the Hicom alarm.
                                 hicomAlReset 1.3.6.1.4.1.231.7.2.1.2.2.1.10 integer read-write
This variable can be set to reset a Hicom alarm. Enumeration: 'finok': 4, 'init': 1, 'busy': 3, 'finerr': 5, 'error': 2.
                                 hicomAlTimOldDat 1.3.6.1.4.1.231.7.2.1.2.2.1.11 integer32 read-only
Date and time of the previous set of this Hicom alarm.
                                 hicomAlArrivalTimDat 1.3.6.1.4.1.231.7.2.1.2.2.1.12 integer32 read-only
Unity A&S Date and time of the arrival of this Hicom alarm.
                         hicomAlFiltConfTable 1.3.6.1.4.1.231.7.2.1.2.3 no-access
The table of configured Hicom alarm filters.
                             hicomAlFiltConfEntry 1.3.6.1.4.1.231.7.2.1.2.3.1 no-access
Each entry specifies a filter for a certain type of Hicom alarm.
                                 hicomAlFiltConfPabxId 1.3.6.1.4.1.231.7.2.1.2.3.1.1 integer32 no-access
Unique identifier of a Hicom system.
                                 hicomAlFiltConfGroup 1.3.6.1.4.1.231.7.2.1.2.3.1.2 integer32 no-access
Group identifier of a Hicom alarm.
                                 hicomAlFiltConfSubId 1.3.6.1.4.1.231.7.2.1.2.3.1.3 integer32 no-access
Sub-identifier of a Hicom alarm within its group.
                                 hicomAlFiltConfPriority 1.3.6.1.4.1.231.7.2.1.2.3.1.4 alarmpriorities no-access
Priority of a Hicom alarm.
                                 hicomAlFiltConfSwitch 1.3.6.1.4.1.231.7.2.1.2.3.1.5 alarmfilterstates read-only
Specifies whether filtering for this alarm is switched ON or OFF. If set to ON, no trap will be generated in case the alarm is being SET or RESET.
                                 hicomAlFiltConfRowStat 1.3.6.1.4.1.231.7.2.1.2.3.1.6 rowstatus read-only
Setting a non-existing RowStat variable to 'createAndGo', creates a new row. If creation was successful, the row gets the status 'active'. Variables of an 'active' row can be read and modified. Setting RowStat to 'destroy' effects the deletion of the row.
                         hicomAlarmSubagentLastMsgNo 1.3.6.1.4.1.231.7.2.1.2.4 integer32 read-only
The last message, warning or error number issued by the Alarm subagent.
                         hicomAlarmSubagentLastMsgText 1.3.6.1.4.1.231.7.2.1.2.5 displaystring read-only
The last message, warning or error text issued by the Alarm subagent.
                         hicomAlMirrorUploadTable 1.3.6.1.4.1.231.7.2.1.2.6 no-access
The table to start an Alarm Upload
                             hicomAlMirrorUploadEntry 1.3.6.1.4.1.231.7.2.1.2.6.1 no-access
Each entry describes a Hicom alarm in detail.
                                 hicomAlMirrorUploadPabxId 1.3.6.1.4.1.231.7.2.1.2.6.1.1 integer32 read-only
Unique identifier of a Hicom system.
                                 hicomAlMirrorUploadMnemonic 1.3.6.1.4.1.231.7.2.1.2.6.1.2 displaystring read-only
Mnemonic name of the Hicom system.
                                 hicomAlMirrorUploadState 1.3.6.1.4.1.231.7.2.1.2.6.1.3 integer read-write
Status of the AlarmMirror upload done (1), error (2), busy (3) Enumeration: 'busy': 3, 'done': 1, 'error': 2.
                                 hicomAlMirrorUploadStartTimDat 1.3.6.1.4.1.231.7.2.1.2.6.1.4 displaystring read-only
Last successful initiation of an AlarmMirror upload.
                                 hicomAlMirrorUploadErrorTimDat 1.3.6.1.4.1.231.7.2.1.2.6.1.5 displaystring read-only
Last unsuccessful initiation of an AlarmMirror upload.
                     hicomErrors 1.3.6.1.4.1.231.7.2.1.3
                         hicomErrorTable 1.3.6.1.4.1.231.7.2.1.3.1 no-access
The table of Hicom errors.
                             hicomErrorEntry 1.3.6.1.4.1.231.7.2.1.3.1.1 no-access
Each entry describes a Hicom error.
                                 hicomErrorPabxId 1.3.6.1.4.1.231.7.2.1.3.1.1.1 integer32 read-only
Internal identifier of a Hicom system.
                                 hicomErrorAlGroup 1.3.6.1.4.1.231.7.2.1.3.1.1.2 integer32 read-only
Hicom alarm group this error belongs to.
                                 hicomErrorAlSubId 1.3.6.1.4.1.231.7.2.1.3.1.1.3 integer32 read-only
Hicom alarm number within the hicomErrorAlGroup this error belongs to.
                                 hicomErrorSerialNo 1.3.6.1.4.1.231.7.2.1.3.1.1.4 integer32 read-only
Internal serial number of a Hicom error.
                                 hicomErrorMsgId 1.3.6.1.4.1.231.7.2.1.3.1.1.5 displaystring read-only
Identifier of the Hicom error.
                                 hicomErrorPriority 1.3.6.1.4.1.231.7.2.1.3.1.1.6 displaystring read-only
Priority of the Hicom error.
                                 hicomErrorAction 1.3.6.1.4.1.231.7.2.1.3.1.1.7 displaystring read-only
Required Hicom system action.
                                 hicomErrorAbsMod 1.3.6.1.4.1.231.7.2.1.3.1.1.8 displaystring read-only
Hicom module detecting the error.
                                 hicomErrorEvent 1.3.6.1.4.1.231.7.2.1.3.1.1.9 displaystring read-only
Description of the Hicom error.
                                 hicomErrorSubevent 1.3.6.1.4.1.231.7.2.1.3.1.1.10 displaystring read-only
Subdescription of the Hicom error.
                                 hicomErrorCardRef 1.3.6.1.4.1.231.7.2.1.3.1.1.11 displaystring read-only
Reference to a Hicom board.
                                 hicomErrorBoardVersion 1.3.6.1.4.1.231.7.2.1.3.1.1.12 displaystring read-only
Version of that board.
                                 hicomErrorFwType 1.3.6.1.4.1.231.7.2.1.3.1.1.13 displaystring read-only
Firmware of that board.
                                 hicomErrorTimDat 1.3.6.1.4.1.231.7.2.1.3.1.1.14 integer32 read-only
Date and time of the Hicom error.
                                 hicomErrorOrigText 1.3.6.1.4.1.231.7.2.1.3.1.1.15 displaystring read-only
Original message text of the Hicom error.
                     hicomAlConf 1.3.6.1.4.1.231.7.2.1.4
                         hicomAlConfig 1.3.6.1.4.1.231.7.2.1.4.1
                             hicomAlConfTable 1.3.6.1.4.1.231.7.2.1.4.1.1 no-access
The table of the Hicom alarm configuration.
                                 hicomAlConfEntry 1.3.6.1.4.1.231.7.2.1.4.1.1.1 no-access
Each entry describes the configuration of a Hicom alarm.
                                     hicomAlConfPabxId 1.3.6.1.4.1.231.7.2.1.4.1.1.1.1 integer32 read-only
Unique identifier of the Hicom system.
                                     hicomAlConfAlGroup 1.3.6.1.4.1.231.7.2.1.4.1.1.1.2 integer32 read-only
Group identifier of a Hicom alarm.
                                     hicomAlConfAlSubId 1.3.6.1.4.1.231.7.2.1.4.1.1.1.3 integer32 read-only
Internal group identifier of a Hicom alarm.
                                     hicomAlConfName 1.3.6.1.4.1.231.7.2.1.4.1.1.1.4 displaystring read-only
Name of the Hicom alarm.
                                     hicomAlConfThreshold1 1.3.6.1.4.1.231.7.2.1.4.1.1.1.5 integer32 read-only
Threshold 'minor' related Hicom errors.
                                     hicomAlConfThreshold2 1.3.6.1.4.1.231.7.2.1.4.1.1.1.6 integer32 read-only
Threshold 'major' for related Hicom errors.
                                     hicomAlConfTime1 1.3.6.1.4.1.231.7.2.1.4.1.1.1.7 integer32 read-only
Interval for the minor threshold.
                                     hicomAlConfTime2 1.3.6.1.4.1.231.7.2.1.4.1.1.1.8 integer32 read-only
Interval for the major threshold.
                                     hicomAlConfTimeH 1.3.6.1.4.1.231.7.2.1.4.1.1.1.9 integer32 read-only
Threshold interval for device alarms. Unit of Threshold is hours.
                                     hicomAlConfBase 1.3.6.1.4.1.231.7.2.1.4.1.1.1.10 integer32 read-only
Base value for thresholds in percent.
                             hicomAlConfPersonTable 1.3.6.1.4.1.231.7.2.1.4.1.2 no-access
The table for the alarm configuration of personal (VIP) Hicom alarms.
                                 hicomAlConfPersonEntry 1.3.6.1.4.1.231.7.2.1.4.1.2.1 no-access
Each entry contains an extension number for which a VIP alarm is configured.
                                     hicomAlConfPersonPabxId 1.3.6.1.4.1.231.7.2.1.4.1.2.1.1 integer32 read-only
Unique identifier of the Hicom system.
                                     hicomAlConfPersonAlGroup 1.3.6.1.4.1.231.7.2.1.4.1.2.1.2 integer32 read-only
Group identifier of the Hicom alarm.
                                     hicomAlConfPersonAlSubId 1.3.6.1.4.1.231.7.2.1.4.1.2.1.3 integer32 read-only
Internal group identifier of the Hicom alarm.
                                     hicomAlConfPersonExtNo 1.3.6.1.4.1.231.7.2.1.4.1.2.1.4 displaystring read-only
Extension number.
                             hicomAlConfTargetTable 1.3.6.1.4.1.231.7.2.1.4.1.3 no-access
The table of the alarm configuration of Hicom target alarms.
                                 hicomAlConfTargetEntry 1.3.6.1.4.1.231.7.2.1.4.1.3.1 no-access
Each entry describes a trunk for which a target alarm is configured.
                                     hicomAlConfTargetPabxId 1.3.6.1.4.1.231.7.2.1.4.1.3.1.1 integer32 read-only
Unique identifier of the Hicom system.
                                     hicomAlConfTargetAlGroup 1.3.6.1.4.1.231.7.2.1.4.1.3.1.2 integer32 read-only
Group identifier of the Hicom alarm.
                                     hicomAlConfTargetAlSubId 1.3.6.1.4.1.231.7.2.1.4.1.3.1.3 integer32 read-only
Internal group identifier of the Hicom alarm.
                                     hicomAlConfTargetLtg 1.3.6.1.4.1.231.7.2.1.4.1.3.1.4 integer32 read-only
Line Trunk Group of the trunk.
                                     hicomAlConfTargetLtu 1.3.6.1.4.1.231.7.2.1.4.1.3.1.5 integer32 read-only
Line Trunk Unit of the trunk.
                                     hicomAlConfTargetSlot 1.3.6.1.4.1.231.7.2.1.4.1.3.1.6 integer32 read-only
Slot of the trunk.
                                     hicomAlConfTargetTrunkNo 1.3.6.1.4.1.231.7.2.1.4.1.3.1.7 integer32 read-only
Trunk number.
                         hicomErrAlConfInfo 1.3.6.1.4.1.231.7.2.1.4.2
                             hicomErrAlConfSubagentLastMsgNo 1.3.6.1.4.1.231.7.2.1.4.2.1 integer32 read-only
The last message, warning or error number issued by the Error/Alarm config subagent.
                             hicomErrAlConfSubagentLastMsgText 1.3.6.1.4.1.231.7.2.1.4.2.2 displaystring read-only
The last message, warning or error text issued by the Error/Alarm config subagent.
                             hicomErrAlConfResultData 1.3.6.1.4.1.231.7.2.1.4.2.3 integer32 read-write
Is used for agent internal communication. Contains the PabxId of a Hicom for which the last discovery process was conveyed. Is SET by the discovery agent and indicates the availability of new discovered data. The new data is to be incorporated by the subagent into the subagent's data base.
                         hicomAlConfDiscovery 1.3.6.1.4.1.231.7.2.1.4.3
                             hicomAlConfChanges 1.3.6.1.4.1.231.7.2.1.4.3.1 counter32 read-only
Indicates changes in the hicomAlConfig group.
                             hicomAlConfDiscovTable 1.3.6.1.4.1.231.7.2.1.4.3.2 no-access
This table contains information about the alarm configuration discoveries for each managed Hicom.
                                 hicomAlConfDiscovEntry 1.3.6.1.4.1.231.7.2.1.4.3.2.1 no-access
Each entry describes the alarm configuration discovery for a specific hicom.
                                     hicomAlConfDiscovPabxId 1.3.6.1.4.1.231.7.2.1.4.3.2.1.1 integer32 read-only
Unique identifier of the Hicom being discovered.
                                     hicomAlConfDiscovPabxMnemonic 1.3.6.1.4.1.231.7.2.1.4.3.2.1.2 displaystring read-only
Name of the Hicom.
                                     hicomAlConfDiscovStatus 1.3.6.1.4.1.231.7.2.1.4.3.2.1.3 discoverystates read-write
Status of the alarm configuration discovery process.
                                     hicomAlConfDiscovMode 1.3.6.1.4.1.231.7.2.1.4.3.2.1.4 discoverymodes read-write
Mode of the alarm configuration discovery process.
                                     hicomAlConfDiscovTimDat 1.3.6.1.4.1.231.7.2.1.4.3.2.1.5 displaystring read-only
Date and time of the last successful discovery.
                                     hicomAlConfDiscovErrTimDat 1.3.6.1.4.1.231.7.2.1.4.3.2.1.6 displaystring read-only
Date and time of the last failed discovery.
                     hicomSoft 1.3.6.1.4.1.231.7.2.1.5
                         hicomSoftAps 1.3.6.1.4.1.231.7.2.1.5.1
                             hicomSoftApsTable 1.3.6.1.4.1.231.7.2.1.5.1.1 no-access
The table of installed Hicom software systems.
                                 hicomSoftApsEntry 1.3.6.1.4.1.231.7.2.1.5.1.1.1 no-access
Each entry describes a Hicom software system.
                                     hicomSoftApsPabxId 1.3.6.1.4.1.231.7.2.1.5.1.1.1.1 integer32 read-only
Unique identifier of the Hicom system.
                                     hicomSoftApsID 1.3.6.1.4.1.231.7.2.1.5.1.1.1.2 octet string read-only
Identifier of the software package.
                                     hicomSoftApsPartNo 1.3.6.1.4.1.231.7.2.1.5.1.1.1.3 displaystring read-only
Siemens part number of the software package.
                             hicomSoftPatchTable 1.3.6.1.4.1.231.7.2.1.5.1.2 no-access
The table of installed Hicom software patches.
                                 hicomSoftPatchEntry 1.3.6.1.4.1.231.7.2.1.5.1.2.1 no-access
Each entry describes a software patch.
                                     hicomSoftPatchPabxId 1.3.6.1.4.1.231.7.2.1.5.1.2.1.1 integer32 read-only
Unique identifier of the Hicom system.
                                     hicomSoftPatchNo 1.3.6.1.4.1.231.7.2.1.5.1.2.1.2 octet string read-only
Identifier of the software patch.
                                     hicomSoftPatchHWMod 1.3.6.1.4.1.231.7.2.1.5.1.2.1.3 displaystring read-only
Identification of a hardware module the patch is for.
                                     hicomSoftPatchActType 1.3.6.1.4.1.231.7.2.1.5.1.2.1.4 displaystring read-only
Activation state of patch.
                                     hicomSoftPatchGroup 1.3.6.1.4.1.231.7.2.1.5.1.2.1.5 displaystring read-only
Group identifier of a patch.
                         hicomSoftInfo 1.3.6.1.4.1.231.7.2.1.5.2
                             hicomSoftSubagentLastMsgNo 1.3.6.1.4.1.231.7.2.1.5.2.1 integer32 read-only
The last message, warning or error number issued by the Software subagent.
                             hicomSoftSubagentLastMsgText 1.3.6.1.4.1.231.7.2.1.5.2.2 octet string read-only
The last message, warning or error text issued by the Software subagent.
                             hicomSoftResultData 1.3.6.1.4.1.231.7.2.1.5.2.3 integer32 read-write
Is used for agent internal communication. Contains the PabxId of a Hicom for which the last discovery process was conveyed. Is SET by the discovery agent and indicates the availability of new discovered data. The new data is to be incorporated by the subagent into the subagent's data base.
                         hicomSoftDiscovery 1.3.6.1.4.1.231.7.2.1.5.3
                             hicomSoftChanges 1.3.6.1.4.1.231.7.2.1.5.3.1 counter32 read-only
Indicates changes in the hicomSoft group.
                             hicomSoftDiscovTable 1.3.6.1.4.1.231.7.2.1.5.3.2 no-access
This table contains information about the software discoveries for each managed Hicom.
                                 hicomSoftDiscovEntry 1.3.6.1.4.1.231.7.2.1.5.3.2.1 no-access
Each entry describes the software discovery for a specific hicom.
                                     hicomSoftDiscovPabxId 1.3.6.1.4.1.231.7.2.1.5.3.2.1.1 integer32 read-only
Unique identifier of the Hicom being discovered.
                                     hicomSoftDiscovPabxMnemonic 1.3.6.1.4.1.231.7.2.1.5.3.2.1.2 displaystring read-only
Name of the Hicom.
                                     hicomSoftDiscovStatus 1.3.6.1.4.1.231.7.2.1.5.3.2.1.3 discoverystates read-write
Status of the software discovery process.
                                     hicomSoftDiscovMode 1.3.6.1.4.1.231.7.2.1.5.3.2.1.4 discoverymodes read-write
Mode of the software discovery process.
                                     hicomSoftDiscovTimDat 1.3.6.1.4.1.231.7.2.1.5.3.2.1.5 displaystring read-only
Date and time of the last successful software discovery.
                                     hicomSoftDiscovErrTimDat 1.3.6.1.4.1.231.7.2.1.5.3.2.1.6 displaystring read-only
Date and time of the last failed software discovery.
                     hicomHard 1.3.6.1.4.1.231.7.2.1.6
                         hicomCabinets 1.3.6.1.4.1.231.7.2.1.6.1
                             hicomCabTable 1.3.6.1.4.1.231.7.2.1.6.1.1 no-access
The table of installed hicom cabinets.
                                 hicomCabEntry 1.3.6.1.4.1.231.7.2.1.6.1.1.1 no-access
Each entry describes a hicom cabinet.
                                     hicomCabPabxId 1.3.6.1.4.1.231.7.2.1.6.1.1.1.1 integer32 read-only
Unique identifier of the Hicom to which the cabinet belongs.
                                     hicomCabAddr 1.3.6.1.4.1.231.7.2.1.6.1.1.1.2 octet string read-only
Unique identifier of the cabinet within the Hicom.
                                     hicomCabType 1.3.6.1.4.1.231.7.2.1.6.1.1.1.3 displaystring read-only
Short name of cabinet type.
                                     hicomCabPartNo 1.3.6.1.4.1.231.7.2.1.6.1.1.1.4 displaystring read-only
Siemens part number of the cabinet.
                                     hicomCabNumShelves 1.3.6.1.4.1.231.7.2.1.6.1.1.1.5 integer32 read-only
The number of shelves in a cabinet.
                             hicomFrameTable 1.3.6.1.4.1.231.7.2.1.6.1.2 no-access
The table of installed Hicom frames.
                                 hicomFrameEntry 1.3.6.1.4.1.231.7.2.1.6.1.2.1 no-access
Each entry describes one Hicom frame.
                                     hicomFramePabxId 1.3.6.1.4.1.231.7.2.1.6.1.2.1.1 integer32 read-only
Unique identifier of the Hicom to which a frame belongs.
                                     hicomFrameCabAddr 1.3.6.1.4.1.231.7.2.1.6.1.2.1.2 octet string read-only
Identifier of the cabinet to which a frame belongs.
                                     hicomFrameMntLevel 1.3.6.1.4.1.231.7.2.1.6.1.2.1.3 integer32 read-only
Mounting level of the frame in a cabinet.
                                     hicomFrameType 1.3.6.1.4.1.231.7.2.1.6.1.2.1.4 displaystring read-only
Short name of frame type.
                                     hicomFramePartNo 1.3.6.1.4.1.231.7.2.1.6.1.2.1.5 displaystring read-only
Siemens part number for this frame type.
                                     hicomFramePID1 1.3.6.1.4.1.231.7.2.1.6.1.2.1.6 displaystring read-only
Processor identification - control part A.
                                     hicomFramePID2 1.3.6.1.4.1.231.7.2.1.6.1.2.1.7 displaystring read-only
Processor identification - control part B.
                                     hicomFramePID3 1.3.6.1.4.1.231.7.2.1.6.1.2.1.8 displaystring read-only
Processor identification.
                                     hicomFrameLTU 1.3.6.1.4.1.231.7.2.1.6.1.2.1.9 integer32 read-only
If the shelf houses a LTU, this is the LTU's number.
                                     hicomFrameIpAddr 1.3.6.1.4.1.231.7.2.1.6.1.2.1.10 displaystring read-only
IP-Adress related to a Local Sysytem (LS).
                         hicomPeripherals 1.3.6.1.4.1.231.7.2.1.6.2
                             hicomPeriphTable 1.3.6.1.4.1.231.7.2.1.6.2.1 no-access
The table of installed devices: disks, tapes etc.
                                 hicomPeriphEntry 1.3.6.1.4.1.231.7.2.1.6.2.1.1 no-access
Each entry describes a device.
                                     hicomPeriphPabxId 1.3.6.1.4.1.231.7.2.1.6.2.1.1.1 integer32 read-only
Unique identifier of the Hicom to which the peripheral device belongs.
                                     hicomPeriphContrID 1.3.6.1.4.1.231.7.2.1.6.2.1.1.2 integer32 read-only
Identifier of the controller the device is connected to.
                                     hicomPeriphModule 1.3.6.1.4.1.231.7.2.1.6.2.1.1.3 octet string read-only
Identifier of the related sever module: A1, C1, V1-V3 or T1-T3.
                                     hicomPeriphType 1.3.6.1.4.1.231.7.2.1.6.2.1.1.4 displaystring read-only
Abbreviation of the device type: HD, FT, CT ...
                                     hicomPeriphSSNo 1.3.6.1.4.1.231.7.2.1.6.2.1.1.5 displaystring read-only
Product identification.
                                     hicomPeriphSize 1.3.6.1.4.1.231.7.2.1.6.2.1.1.6 integer32 read-only
Capacity (MB) of the storage medium.
                                     hicomPeriphGran 1.3.6.1.4.1.231.7.2.1.6.2.1.1.7 integer32 read-only
Sector size of the medium.
                         hicomBoards 1.3.6.1.4.1.231.7.2.1.6.3
                             hicomCDSMTable 1.3.6.1.4.1.231.7.2.1.6.3.1 no-access
The table of hicom CDSM boards.
                                 hicomCDSMEntry 1.3.6.1.4.1.231.7.2.1.6.3.1.1 no-access
Each entry describes one hardware board.
                                     hicomCDSMPabxId 1.3.6.1.4.1.231.7.2.1.6.3.1.1.1 integer32 read-only
Identifier of the Hicom to which the Board belongs.
                                     hicomCDSMCabAddr 1.3.6.1.4.1.231.7.2.1.6.3.1.1.2 octet string read-only
Identifier of the cabinet to which the board belongs.
                                     hicomCDSMMntLevel 1.3.6.1.4.1.231.7.2.1.6.3.1.1.3 integer32 read-only
Mounting level of the frame containing the board.
                                     hicomCDSMSlotAddr 1.3.6.1.4.1.231.7.2.1.6.3.1.1.4 integer32 read-only
Slot address for the board within its frame.
                                     hicomCDSMPartNo 1.3.6.1.4.1.231.7.2.1.6.3.1.1.5 displaystring read-only
Siemens part number of the installed board.
                                     hicomCDSMCode 1.3.6.1.4.1.231.7.2.1.6.3.1.1.6 displaystring read-only
Short name of the board.
                                     hicomCDSMVers 1.3.6.1.4.1.231.7.2.1.6.3.1.1.7 integer32 read-only
Version number of the board.
                                     hicomCDSMFirmware 1.3.6.1.4.1.231.7.2.1.6.3.1.1.8 displaystring read-only
Firmware version installed on the board.
                             hicomCDSUTable 1.3.6.1.4.1.231.7.2.1.6.3.2 no-access
The table of hicom CDSU boards.
                                 hicomCDSUEntry 1.3.6.1.4.1.231.7.2.1.6.3.2.1 no-access
Each entry describes one CDSU Board.
                                     hicomCDSUPabxId 1.3.6.1.4.1.231.7.2.1.6.3.2.1.1 integer32 read-only
The identifier of the Hicom to which the board belongs.
                                     hicomCDSUCabAddr 1.3.6.1.4.1.231.7.2.1.6.3.2.1.2 octet string read-only
Identifier of the cabinet to which the board belongs.
                                     hicomCDSUMntLevel 1.3.6.1.4.1.231.7.2.1.6.3.2.1.3 integer32 read-only
Mounting level of the frame containing the board.
                                     hicomCDSUSlotAddr 1.3.6.1.4.1.231.7.2.1.6.3.2.1.4 integer32 read-only
Slot address for the board within its frame.
                                     hicomCDSUPartNo 1.3.6.1.4.1.231.7.2.1.6.3.2.1.5 displaystring read-only
Siemens part number of the installed board.
                                     hicomCDSUCode 1.3.6.1.4.1.231.7.2.1.6.3.2.1.6 displaystring read-only
Short name of the board.
                                     hicomCDSUVers 1.3.6.1.4.1.231.7.2.1.6.3.2.1.7 integer32 read-only
Version number of the board.
                                     hicomCDSUFirmware 1.3.6.1.4.1.231.7.2.1.6.3.2.1.8 displaystring read-only
Firmware version installed on the board.
                             hicomBCSMTable 1.3.6.1.4.1.231.7.2.1.6.3.3 no-access
The table of hicom BCSM boards.
                                 hicomBCSMEntry 1.3.6.1.4.1.231.7.2.1.6.3.3.1 no-access
Each entry describes one HW board.
                                     hicomBCSMPabxId 1.3.6.1.4.1.231.7.2.1.6.3.3.1.1 integer32 read-only
The identifier of the Hicom to which the board belongs.
                                     hicomBCSMMod 1.3.6.1.4.1.231.7.2.1.6.3.3.1.2 octet string read-only
Identifier of the module to which the board belongs.
                                     hicomBCSMSlotAddr 1.3.6.1.4.1.231.7.2.1.6.3.3.1.3 integer32 read-only
Address of slot containing the board.
                                     hicomBCSMConfBoard 1.3.6.1.4.1.231.7.2.1.6.3.3.1.4 displaystring read-only
Siemens part number of the configured board.
                                     hicomBCSMCode 1.3.6.1.4.1.231.7.2.1.6.3.3.1.5 displaystring read-only
Short name of the board.
                                     hicomBCSMInstBoard 1.3.6.1.4.1.231.7.2.1.6.3.3.1.6 displaystring read-only
Siemens part number of the installed board. This information may in fact differ from that in hicomBCSMConfBoard.
                                     hicomBCSMVers 1.3.6.1.4.1.231.7.2.1.6.3.3.1.7 integer32 read-only
Version number of the board.
                                     hicomBCSMFirmware 1.3.6.1.4.1.231.7.2.1.6.3.3.1.8 displaystring read-only
Firmware version installed on the board.
                                     hicomBCSMStatus 1.3.6.1.4.1.231.7.2.1.6.3.3.1.9 displaystring read-only
State of the board: INS, READY ...
                             hicomBCSUTable 1.3.6.1.4.1.231.7.2.1.6.3.4 no-access
The table of hicom BCSU boards.
                                 hicomBCSUEntry 1.3.6.1.4.1.231.7.2.1.6.3.4.1 no-access
Each entry describes one HW board.
                                     hicomBCSUPabxId 1.3.6.1.4.1.231.7.2.1.6.3.4.1.1 integer32 read-only
The identifier of the Hicom to which the board belongs.
                                     hicomBCSULTG 1.3.6.1.4.1.231.7.2.1.6.3.4.1.2 integer32 read-only
Identifier of the LTG to which the LTU belongs.
                                     hicomBCSULTU 1.3.6.1.4.1.231.7.2.1.6.3.4.1.3 integer32 read-only
Identifier of the LTU to which the board belongs.
                                     hicomBCSUSlotAddr 1.3.6.1.4.1.231.7.2.1.6.3.4.1.4 integer32 read-only
Address of slot containing the board.
                                     hicomBCSUConfBoard 1.3.6.1.4.1.231.7.2.1.6.3.4.1.5 displaystring read-only
Siemens part number of the configured board.
                                     hicomBCSUCode 1.3.6.1.4.1.231.7.2.1.6.3.4.1.6 displaystring read-only
Short name of the board.
                                     hicomBCSUInstBoard 1.3.6.1.4.1.231.7.2.1.6.3.4.1.7 displaystring read-only
Siemens part number of the installed board. This information may in fact differ from that in hicomBCSMConfBoard.
                                     hicomBCSUVers 1.3.6.1.4.1.231.7.2.1.6.3.4.1.8 integer32 read-only
Version number of the board.
                                     hicomBCSUFirmware 1.3.6.1.4.1.231.7.2.1.6.3.4.1.9 displaystring read-only
Firmware version installed on the board.
                                     hicomBCSUStatus 1.3.6.1.4.1.231.7.2.1.6.3.4.1.10 displaystring read-only
State of the board: INS, READY ...
                         hicomHWInfo 1.3.6.1.4.1.231.7.2.1.6.4
                             hicomHardSubagentLastMsgNo 1.3.6.1.4.1.231.7.2.1.6.4.1 integer32 read-only
The last message, warning or error number issued by the Hardware subagent.
                             hicomHardSubagentLastMsgText 1.3.6.1.4.1.231.7.2.1.6.4.2 octet string read-only
The last message, warning or error text issued by the Hardware subagent.
                             hicomHardSubagentResultData 1.3.6.1.4.1.231.7.2.1.6.4.3 integer32 read-write
Is used for agent internal communication. Contains the PabxId of a Hicom for which the last discovery process was conveyed. Is SET by the discovery agent and indicates the availability of new discovered data. The new data is to be incorporated by the subagent into the subagent's data base.
                         hicomHWDiscovery 1.3.6.1.4.1.231.7.2.1.6.5
                             hicomHWChanges 1.3.6.1.4.1.231.7.2.1.6.5.1 counter32 read-only
Indicates the number of finished hardware discoveries - corresponds to the number of hicomHWDiscovXXX traps sent out.
                             hicomHWDiscovTable 1.3.6.1.4.1.231.7.2.1.6.5.2 no-access
The table describing the status concerning discovery of HW information.
                                 hicomHWDiscovEntry 1.3.6.1.4.1.231.7.2.1.6.5.2.1 no-access
Each entry describes the status of the discovery process for a specific hicom.
                                     hicomHWDiscovPabxId 1.3.6.1.4.1.231.7.2.1.6.5.2.1.1 integer32 read-only
Unique identifier of the Hicom being discovered.
                                     hicomHWDiscovPabxMnemonic 1.3.6.1.4.1.231.7.2.1.6.5.2.1.2 displaystring read-only
Name of the Hicom system.
                                     hicomHWDiscovStatus 1.3.6.1.4.1.231.7.2.1.6.5.2.1.3 discoverystates read-write
Status of HW discovery process. A Manager may initiate a discovery by setting this variable to value busy. The other values are set by the agent.
                                     hicomHWDiscovMode 1.3.6.1.4.1.231.7.2.1.6.5.2.1.4 discoverymodes read-write
Mode of discovery process.
                                     hicomHWDiscovTimDat 1.3.6.1.4.1.231.7.2.1.6.5.2.1.5 displaystring read-only
Date and time (year, month, day, hour, minute, second) the last successful discovery action was performed for the Hicom.
                                     hicomHWDiscovErrTimDat 1.3.6.1.4.1.231.7.2.1.6.5.2.1.6 displaystring read-only
Date and time (year, month, day, hour, minute, second) the last failed discovery action was performed for the Hicom.
                     hicomTopo 1.3.6.1.4.1.231.7.2.1.7
                         hicomTrunkGrp 1.3.6.1.4.1.231.7.2.1.7.1
                             hicomTrunkGrpTable 1.3.6.1.4.1.231.7.2.1.7.1.1 no-access
The table of trunk groups.
                                 hicomTrunkGrpEntry 1.3.6.1.4.1.231.7.2.1.7.1.1.1 no-access
Each entry describes a Hicom trunk group.
                                     hicomTrunkGrpPabxId 1.3.6.1.4.1.231.7.2.1.7.1.1.1.1 integer32 read-only
Unique identifier of the Hicom system.
                                     hicomTrunkGrpNo 1.3.6.1.4.1.231.7.2.1.7.1.1.1.2 integer32 read-only
Identifier Trunk Group.
                                     hicomTrunkGrpNNodeNo 1.3.6.1.4.1.231.7.2.1.7.1.1.1.3 integer32 read-write
Number of neighbour node. Value to be delivered by manager.
                                     hicomTrunkGrpVNodeNo 1.3.6.1.4.1.231.7.2.1.7.1.1.1.4 integer32 read-only
Derived from source SNodeNo of trunk table.
                                     hicomTrunkGrpTrunkType 1.3.6.1.4.1.231.7.2.1.7.1.1.1.5 trunktypes read-only
Type of the trunk group.
                                     hicomTrunkGrpMaxNo 1.3.6.1.4.1.231.7.2.1.7.1.1.1.6 integer32 read-only
The maximum number of trunks a trunk groupp may contain.
                                     hicomTrunkGrpName 1.3.6.1.4.1.231.7.2.1.7.1.1.1.7 displaystring read-only
Name of the trunk group.
                                     hicomTrunkGrpDevice 1.3.6.1.4.1.231.7.2.1.7.1.1.1.8 displaystring read-only
Type of device.
                                     hicomTrunkGrpAlarms 1.3.6.1.4.1.231.7.2.1.7.1.1.1.9 octet string read-only
Octet string contains configured AlSubIds (0 up to 519) of related Pabx und trunkgroup. The hicomTrunkGrpAlarms string is 65 octets long. AlSubId '0' is set, if (hicomTrunkGrpAlarms[0] AND 0x01) evaluates to true. AlSubId '7' is set, if (hicomTrunkGrpAlarms[0] AND 0x80) evaluates to true. AlSubId '8' is set, if (hicomTrunkGrpAlarms[1] AND 0x01) evaluates to true etc.
                         hicomTrunk 1.3.6.1.4.1.231.7.2.1.7.2
                             hicomTrunkTable 1.3.6.1.4.1.231.7.2.1.7.2.1 no-access
The table of trunks.
                                 hicomTrunkEntry 1.3.6.1.4.1.231.7.2.1.7.2.1.1 no-access
Each entry describes a Hicom trunk.
                                     hicomTrunkPabxId 1.3.6.1.4.1.231.7.2.1.7.2.1.1.1 integer32 read-only
Identifier of the Hicom.
                                     hicomTrunkType 1.3.6.1.4.1.231.7.2.1.7.2.1.1.2 trunktypes read-only
Type of trunk.
                                     hicomTrunkTrunkGrpNo 1.3.6.1.4.1.231.7.2.1.7.2.1.1.3 integer32 read-only
Identifier of the related Trunk Group.
                                     hicomTrunkLtg 1.3.6.1.4.1.231.7.2.1.7.2.1.1.4 integer32 read-only
Identifier of the related line trunk group.
                                     hicomTrunkLtu 1.3.6.1.4.1.231.7.2.1.7.2.1.1.5 integer32 read-only
Identifier of the related line trunk unit.
                                     hicomTrunkSlot 1.3.6.1.4.1.231.7.2.1.7.2.1.1.6 integer32 read-only
Identification of slot within a frame.
                                     hicomTrunkNo 1.3.6.1.4.1.231.7.2.1.7.2.1.1.7 integer32 read-only
Number of trunk within a trunk group.
                                     hicomTrunkChannelGrp 1.3.6.1.4.1.231.7.2.1.7.2.1.1.8 integer32 read-only
Identification of an aggregate of B-channels.
                                     hicomTrunkSNodeNo 1.3.6.1.4.1.231.7.2.1.7.2.1.1.9 integer32 read-only
Virtual number of the source node of a connection.
                                     hicomTrunkStatOp 1.3.6.1.4.1.231.7.2.1.7.2.1.1.10 integer read-only
The operational state of a trunk. Enumeration: 'yes': 2, 'no': 1.
                                     hicomTrunkAlSubId 1.3.6.1.4.1.231.7.2.1.7.2.1.1.11 integer32 read-only
Assigned alarm referring to a specific target.
                                     hicomTrunkChannels 1.3.6.1.4.1.231.7.2.1.7.2.1.1.12 octet string read-only
List of chanels in a trunk group. Base64 coded.
                                     hicomTrunkDevice 1.3.6.1.4.1.231.7.2.1.7.2.1.1.13 displaystring read-only
Type of device / connection.
                                     hicomTrunkName 1.3.6.1.4.1.231.7.2.1.7.2.1.1.14 displaystring read-only
Name of the trunk.
                         hicomTopoInfo 1.3.6.1.4.1.231.7.2.1.7.3
                             hicomTopoSubagentLastMsgNo 1.3.6.1.4.1.231.7.2.1.7.3.1 integer32 read-only
The last message, warning or error number issued by the Topology subagent.
                             hicomTopoSubagentLastMsgText 1.3.6.1.4.1.231.7.2.1.7.3.2 octet string read-only
The last message, warning or error text issued by the Topology subagent.
                             hicomTopoSubagentResultData 1.3.6.1.4.1.231.7.2.1.7.3.3 integer32 read-write
Is used for agent internal communication. Contains the PabxId of a Hicom for which the last discovery process was conveyed. Is SET by the discovery agent and indicates the availability of new discovered data. The new data is to be incorporated by the subagent into the subagent's data base.
                         hicomTopoDiscovery 1.3.6.1.4.1.231.7.2.1.7.4
                             hicomTopoChanges 1.3.6.1.4.1.231.7.2.1.7.4.1 counter32 read-only
Indicates number of hardware discoveries - corresponds to TopoDiscovery traps sent out.
                             hicomTopoDiscovTable 1.3.6.1.4.1.231.7.2.1.7.4.2 no-access
The table describing the status concerning discovery of topology information.
                                 hicomTopoDiscovEntry 1.3.6.1.4.1.231.7.2.1.7.4.2.1 no-access
An entry in the hicomTopoDiscovTable. Each entry describes the status of the discovery process for a specific hicom.
                                     hicomTopoDiscovPabxId 1.3.6.1.4.1.231.7.2.1.7.4.2.1.1 integer32 read-only
Unique identifier of the Hicom being discovered.
                                     hicomTopoDiscovPabxMnemonic 1.3.6.1.4.1.231.7.2.1.7.4.2.1.2 displaystring read-only
Name of the Hicom system.
                                     hicomTopoDiscovStatus 1.3.6.1.4.1.231.7.2.1.7.4.2.1.3 discoverystates read-write
Status of Topo discovery process. A manager initiates discovery by setting the variable to 'busy'. The agent will set the other values.
                                     hicomTopoDiscovMode 1.3.6.1.4.1.231.7.2.1.7.4.2.1.4 discoverymodes read-write
Mode of discovery process.
                                     hicomTopoDiscovTimDat 1.3.6.1.4.1.231.7.2.1.7.4.2.1.5 displaystring read-only
Date and time (year, month, day, hour, minute, second) the last successful discovery action was performed for the Hicom.
                                     hicomTopoDiscovErrTimDat 1.3.6.1.4.1.231.7.2.1.7.4.2.1.6 displaystring read-only
Date and time (year, month, day, hour, minute, second) the last failed discovery action was performed for the Hicom.
                         hicomKntop 1.3.6.1.4.1.231.7.2.1.7.5
                             hicomKntopTable 1.3.6.1.4.1.231.7.2.1.7.5.1 no-access
The table of kntop.
                                 hicomKntopEntry 1.3.6.1.4.1.231.7.2.1.7.5.1.1 no-access
Each entry describes a connection between two Hicoms.
                                     hicomKntopPabxId 1.3.6.1.4.1.231.7.2.1.7.5.1.1.1 integer32 read-only
Identifier of the Hicom.
                                     hicomKntopLtg 1.3.6.1.4.1.231.7.2.1.7.5.1.1.2 integer32 read-only
Identifier of the related line trunk group.
                                     hicomKntopLtu 1.3.6.1.4.1.231.7.2.1.7.5.1.1.3 integer32 read-only
Identifier of the related line trunk unit.
                                     hicomKntopSlot 1.3.6.1.4.1.231.7.2.1.7.5.1.1.4 integer32 read-only
Identification of slot within a frame.
                                     hicomKntopSatznr 1.3.6.1.4.1.231.7.2.1.7.5.1.1.5 integer32 read-only
Number of trunk within a trunk group.
                                     hicomKntopBKanalGrp 1.3.6.1.4.1.231.7.2.1.7.5.1.1.6 integer32 read-only
Identification of an aggregate of B-channels.
                                     hicomKntopPNodeIndex 1.3.6.1.4.1.231.7.2.1.7.5.1.1.7 integer32 read-only
Entry Index of the Partner Node.
                                     hicomKntopPLtg 1.3.6.1.4.1.231.7.2.1.7.5.1.1.8 integer32 read-only
Target Identifier of the related line trunk group.
                                     hicomKntopPLtu 1.3.6.1.4.1.231.7.2.1.7.5.1.1.9 integer32 read-only
Target Identifier of the related line trunk unit.
                                     hicomKntopPSlot 1.3.6.1.4.1.231.7.2.1.7.5.1.1.10 integer32 read-only
Target Identification of slot within a frame.
                                     hicomKntopPSatznr 1.3.6.1.4.1.231.7.2.1.7.5.1.1.11 integer32 read-only
Target Number of trunk within a trunk group.
                                     hicomKntopPBKanalGrp 1.3.6.1.4.1.231.7.2.1.7.5.1.1.12 integer32 read-only
Target Identification of an aggregate of B-channels.
                                     hicomKntopPNodeNo 1.3.6.1.4.1.231.7.2.1.7.5.1.1.13 integer32 read-only
Node number of the target node of the connection.
                                     hicomKntopBunr 1.3.6.1.4.1.231.7.2.1.7.5.1.1.14 integer32 read-only
Buendelnumber of the PEN
                     hicomSQL 1.3.6.1.4.1.231.7.2.1.8
                         hicomSQLsessionIdGenerator 1.3.6.1.4.1.231.7.2.1.8.1 testandincr read-write
hicomSQLsessionIdGenerator is used to create and assign unique SQL session identifiers to concurrent manager applications. hicomSQLsessionIdGenerator shall be used in accordance to the semantics of TestAndIncr specified in Textual Conventions (RFC1903). A GET on hicomSQLsessionIdGenerator returns a new SQL session ID. This value shall be confirmed/claimed by a manager application by setting the hicomSQLsessionIdGenerator variable to the value which was returned by the previous GET. If the SET on hicomSQLsessionIdGenerator succeeds (error status 'noError' is returned), the SQL session ID value is uniquely assigned to the requesting manager application. Further, the agent did create a corresponding entry in the hicomSQLsessionTable having hicomSQLsessionId set to the SQL session ID value used with the SET. If the SET on hicomSQLsessionIdGenerator fails (error status 'inconsistenValue' is returned) the same value was read by another manager and this one just claimed his SQL session ID by performing successfully a SET. In this case no entry is created in the hicomSQLsessionTable. To get and claim a unique SQL session ID, the manager application has to redo the GET and SET operation cycle on hicomSQLsessionIdGenerator. NOTE: using this and other hicomSQL objects is reserved for Siemens internal use ONLY. No documentation on this interface is available for customers.
                         hicomSQLsessionTable 1.3.6.1.4.1.231.7.2.1.8.2 no-access
This table describes all currently active SQL sessions. An entry is generated after a new session ID is read and claimed by a manager application (see hicomSQLsessionIdGenerator). An entry is deleted from the table when its timeout (see hicomSQLsessionTimeout) - which is restarted with each access on hicomSQLresultData - expires. The state of a new created entry initially is idle(1). The manager must then SET hicomSQLsessionStatement and hicomSQLsessionWhereClause, optionally may set hicomSQLsessionTimeout, and then SET hicomSQLsessionState to run(2). The completion of a session will be indicated to the manager via a hicomSQLsessionFinished trap.
                             hicomSQLsessionEntry 1.3.6.1.4.1.231.7.2.1.8.2.1 no-access
An entry in the hicomSQLsessionTable.
                                 hicomSQLsessionId 1.3.6.1.4.1.231.7.2.1.8.2.1.1 integer32 read-only
Unique identifier of the SQL session.
                                 hicomSQLsessionState 1.3.6.1.4.1.231.7.2.1.8.2.1.2 integer read-write
Indicates current state of the SQL session: idle: entry/session has been created by the agent and has to be initialized by the manager. run: to be set by the manager to initiate the execution of the SQL query. error: execution of the SQL query resulted in an error valid: execution of the SQL query was successful. Transitions: idle -> run -> {valid, error} Enumeration: 'idle': 1, 'valid': 5, 'run': 2, 'error': 4.
                                 hicomSQLsessionStatement 1.3.6.1.4.1.231.7.2.1.8.2.1.3 integer32 read-write
Selects the predefined SQL statement for this session.
                                 hicomSQLsessionWhereClause 1.3.6.1.4.1.231.7.2.1.8.2.1.4 displaystring read-write
The WHERE clause to be used for this SQL statement.
                                 hicomSQLsessionTimeout 1.3.6.1.4.1.231.7.2.1.8.2.1.5 integer read-write
Maximum time interval between any two succeeding retrievals to the result data of the session. If no access is made to the to the result data of the session within SQLsessionTimeout, the session and the related result data will be erased. SQLSessionTimeout is messured in seconds.
                                 hicomSQLsessionResultSize 1.3.6.1.4.1.231.7.2.1.8.2.1.6 integer32 read-only
The result of a SQL query is stored in result file. hicomSQLsessionResultSize specifies the size in number of octets of the result file.
                                 hicomSQLsessionResultNoLines 1.3.6.1.4.1.231.7.2.1.8.2.1.7 integer32 read-only
The result of a SQL query is stored in result file. hicomSQLsessionResultNoLines specifies the number of lines in the result file.
                         hicomSQLresultTable 1.3.6.1.4.1.231.7.2.1.8.3 no-access
This table contains the results of finished SQL sessions.
                             hicomSQLresultEntry 1.3.6.1.4.1.231.7.2.1.8.3.1 no-access
An entry in the hicomSQLresultTable.
                                 hicomSQLresultId 1.3.6.1.4.1.231.7.2.1.8.3.1.1 integer32 read-only
Session ID to which these results belong.
                                 hicomSQLresultBlockNo 1.3.6.1.4.1.231.7.2.1.8.3.1.2 integer32 read-only
Identifier of the data block to be returned from the result file. The result file is logically segmented in blocks of 256 octets. Data from the result file is read by GET in block units. Each GET will return one block specified by BlockNo. A GET on BlockNo '0' will return octet 0 to 255 of the result file and a GET on BlockNo '1' octet 256 to 511 etc. If the first or last block is smaller then 256 octets, then a corresponding smaller hicomSQLresultData block will be returned.
                                 hicomSQLresultData 1.3.6.1.4.1.231.7.2.1.8.3.1.3 displaystring read-only
Requested block of result data.
                         hicomSQLinfo 1.3.6.1.4.1.231.7.2.1.8.4
                             hicomSQLSubagentLastMsgNo 1.3.6.1.4.1.231.7.2.1.8.4.1 integer32 read-only
The last message, warning or error number issued by the SQL subagent.
                             hicomSQLSubagentLastMsgText 1.3.6.1.4.1.231.7.2.1.8.4.2 octet string read-only
The last message, warning or error text issued by the SQL subagent.
                     hicomDiscov 1.3.6.1.4.1.231.7.2.1.9
                         hicomDiscovTable 1.3.6.1.4.1.231.7.2.1.9.1 no-access
This table contains information about the master discoveries for each managed Hicom. Starting a master discoveries will lead to the individual discoveries being started. The termination of these discoveries will be signalled through their respective traps.
                             hicomDiscovEntry 1.3.6.1.4.1.231.7.2.1.9.1.1 no-access
Each entry describes the master discovery for a specific hicom.
                                 hicomDiscovPabxId 1.3.6.1.4.1.231.7.2.1.9.1.1.1 integer32 read-only
Unique identifier of the Hicom being discovered.
                                 hicomDiscovPabxMnemonic 1.3.6.1.4.1.231.7.2.1.9.1.1.2 displaystring read-only
Name of the Hicom.
                                 hicomDiscovStatus 1.3.6.1.4.1.231.7.2.1.9.1.1.3 discoverystates read-write
Status of master discovery process.
                                 hicomDiscovMode 1.3.6.1.4.1.231.7.2.1.9.1.1.4 discoverymodes read-write
Mode of master discovery process.
                                 hicomDiscovTimDat 1.3.6.1.4.1.231.7.2.1.9.1.1.5 displaystring read-only
Date and time of the last successful discovery.
                                 hicomDiscovErrTimDat 1.3.6.1.4.1.231.7.2.1.9.1.1.6 displaystring read-only
Date and time of the last failed discovery.
                         hicomDiscInfo 1.3.6.1.4.1.231.7.2.1.9.2
                             hicomDiscSubagentLastMsgNo 1.3.6.1.4.1.231.7.2.1.9.2.1 integer32 read-only
The last message, warning or error number issued by the discovery subagent.
                             hicomDiscSubagentLastMsgText 1.3.6.1.4.1.231.7.2.1.9.2.2 octet string read-only
The last message, warning or error text issued by the discovery subagent.
                     hicomMibConformance 1.3.6.1.4.1.231.7.2.1.20
                           hicomMibGroups 1.3.6.1.4.1.231.7.2.1.20.1
                               hicomCntrlTree 1.3.6.1.4.1.231.7.2.1.20.1.0
                                   hicomControlGroup 1.3.6.1.4.1.231.7.2.1.20.1.0.1
Conformance statement of the hicomControlGroup.
                               hicomSysTree 1.3.6.1.4.1.231.7.2.1.20.1.1
                                   hicomSystemGroup 1.3.6.1.4.1.231.7.2.1.20.1.1.1
Conformance statement of the hicomSystemGroup.
                               hicomAlarmTree 1.3.6.1.4.1.231.7.2.1.20.1.2
                                   hicomAlarmsGroup 1.3.6.1.4.1.231.7.2.1.20.1.2.1
Conformance statement of the hicomAlarmsGroup.
                                   hicomAlMirrorUploadGroup 1.3.6.1.4.1.231.7.2.1.20.1.2.2
Conformance statement of the hicomAlMirrorUploadGroup.
                               hicomErrorTree 1.3.6.1.4.1.231.7.2.1.20.1.3
                                   hicomErrorGroup 1.3.6.1.4.1.231.7.2.1.20.1.3.1
Conformance statement for hicomErrorGroup.
                               hicomAlConfTree 1.3.6.1.4.1.231.7.2.1.20.1.4
                                   hicomAlConfigGroup 1.3.6.1.4.1.231.7.2.1.20.1.4.1
Conformance statement for hicomAlConfigGroup.
                                   hicomErrAlConfInfoGroup 1.3.6.1.4.1.231.7.2.1.20.1.4.2
Conformance statement for hicomErrAlConfInfoGroup.
                                   hicomAlConfDiscoveryGroup 1.3.6.1.4.1.231.7.2.1.20.1.4.3
Conformance statement for hicomAlConfDiscoveryGroup.
                               hicomSoftTree 1.3.6.1.4.1.231.7.2.1.20.1.5
                                   hicomSoftGroup 1.3.6.1.4.1.231.7.2.1.20.1.5.1
Conformance statement for hicomSoftGroup.
                                   hicomSoftInfoGroup 1.3.6.1.4.1.231.7.2.1.20.1.5.2
Conformance statement for hicomSoftInfoGroup.
                                   hicomSoftDiscoveryGroup 1.3.6.1.4.1.231.7.2.1.20.1.5.3
Conformance statement for hicomSoftDiscoveryGroup.
                               hicomHardTree 1.3.6.1.4.1.231.7.2.1.20.1.6
                                   hicomCabinetsGroup 1.3.6.1.4.1.231.7.2.1.20.1.6.1
Conformance statement for hicomCabinetsGroup.
                                   hicomPeriperalsGroup 1.3.6.1.4.1.231.7.2.1.20.1.6.2
Conformance statement for hicomPeriperalsGroup.
                                   hicomBoardsGroup 1.3.6.1.4.1.231.7.2.1.20.1.6.3
Conformance statement for hicomBoardsGroup.
                                   hicomHWInfoGroup 1.3.6.1.4.1.231.7.2.1.20.1.6.4
Conformance statement for hicomHWInfoGroup.
                                   hicomHWDiscoveryGroup 1.3.6.1.4.1.231.7.2.1.20.1.6.5
Conformance statement for hicomHWDiscoveryGroup.
                               hicomTopoTree 1.3.6.1.4.1.231.7.2.1.20.1.7
                                   hicomTrunkGrpGroup 1.3.6.1.4.1.231.7.2.1.20.1.7.1
Conformance statement for hicomTrunkGrpGroup.
                                   hicomTrunkGroup 1.3.6.1.4.1.231.7.2.1.20.1.7.2
Conformance statement for hicomTrunkGroup.
                                   hicomTopoInfoGroup 1.3.6.1.4.1.231.7.2.1.20.1.7.3
Conformance statement for hicomTopoInfoGroup.
                                   hicomTopoDiscoveryGroup 1.3.6.1.4.1.231.7.2.1.20.1.7.4
Conformance statement for hicomTopoDiscoveryGroup.
                                   hicomKntopGroup 1.3.6.1.4.1.231.7.2.1.20.1.7.5
Conformance statement for hicomKntopTable.
                               hicomSQLtree 1.3.6.1.4.1.231.7.2.1.20.1.8
                                   hicomSQLsessionGroup 1.3.6.1.4.1.231.7.2.1.20.1.8.1
Conformance statement for hicomSQLsessionGroup.
                                   hicomSQLresultGroup 1.3.6.1.4.1.231.7.2.1.20.1.8.2
Conformance statement for hicomSQLresultGroup.
                                   hicomSQLinfoGroup 1.3.6.1.4.1.231.7.2.1.20.1.8.3
Conformance statement for hicomSQLinfoGroup.
                               hicomDiscovTree 1.3.6.1.4.1.231.7.2.1.20.1.9
                                   hicomDiscovGroup 1.3.6.1.4.1.231.7.2.1.20.1.9.1
Conformance statement for hicomDiscovGroup.
                                   hicomDiscInfoGroup 1.3.6.1.4.1.231.7.2.1.20.1.9.2
Conformance statement for hicomDiscinfoGroup.
                     hicomTrapGroup 1.3.6.1.4.1.231.7.2.1.21
                           hicomTrapVariables 1.3.6.1.4.1.231.7.2.1.21.1
                               hicomSystemTrapVariables 1.3.6.1.4.1.231.7.2.1.21.1.1
                               hicomAlarmTrapVariables 1.3.6.1.4.1.231.7.2.1.21.1.2
                                   hicomAlTrpSysPabxId 1.3.6.1.4.1.231.7.2.1.21.1.2.1 integer32 no-access
Unique identifier of a Hicom system.
                                   hicomAlTrpSysMnemonic 1.3.6.1.4.1.231.7.2.1.21.1.2.2 displaystring no-access
Mnemonic name of the Hicom system.
                               hicomErrorTrapVariables 1.3.6.1.4.1.231.7.2.1.21.1.3
                                   hicomErrTrpPabxId 1.3.6.1.4.1.231.7.2.1.21.1.3.1 integer32 no-access
Unique identifier of a Hicom system.
                                   hicomErrTrpMnemonic 1.3.6.1.4.1.231.7.2.1.21.1.3.2 displaystring no-access
Mnemonic name of the Hicom system.
                               hicomSWTrapVariables 1.3.6.1.4.1.231.7.2.1.21.1.4
                                   hicomSWTrpPabxId 1.3.6.1.4.1.231.7.2.1.21.1.4.1 integer32 no-access
Unique identifier of a Hicom system.
                                   hicomSWTrpPabxMnemonic 1.3.6.1.4.1.231.7.2.1.21.1.4.2 displaystring no-access
Mnemonic name of the Hicom system.
                               hicomAlConfTrapVariables 1.3.6.1.4.1.231.7.2.1.21.1.5
                               hicomHWTrapVariables 1.3.6.1.4.1.231.7.2.1.21.1.6
                                   hicomHWTrpPabxId 1.3.6.1.4.1.231.7.2.1.21.1.6.1 integer32 no-access
Unique identifier of a Hicom system.
                                   hicomHWTrpPabxMnemonic 1.3.6.1.4.1.231.7.2.1.21.1.6.2 displaystring no-access
Mnemonic name of the Hicom system.
                               hicomTopoTrapVariables 1.3.6.1.4.1.231.7.2.1.21.1.7
                                   hicomTopoTrpPabxId 1.3.6.1.4.1.231.7.2.1.21.1.7.1 integer32 no-access
Unique identifier of a Hicom system.
                                   hicomTopoTrpPabxMnemonic 1.3.6.1.4.1.231.7.2.1.21.1.7.2 displaystring no-access
Mnemonic name of the Hicom system.
                               hicomSQLTrapVariables 1.3.6.1.4.1.231.7.2.1.21.1.8
                               hicomDiscTrapVariables 1.3.6.1.4.1.231.7.2.1.21.1.9
                                   hicomEDTrpPabxId 1.3.6.1.4.1.231.7.2.1.21.1.9.1 integer32 no-access
Unique identifier of a Hicom system.
                                   hicomEDTrpPabxMnemonic 1.3.6.1.4.1.231.7.2.1.21.1.9.2 displaystring no-access
Mnemonic name of the Hicom system.
                           hicomTraps 1.3.6.1.4.1.231.7.2.1.21.2
                               hicomSystemTraps 1.3.6.1.4.1.231.7.2.1.21.2.1
                                   internalMessageSystemSubagent 1.3.6.1.4.1.231.7.2.1.21.2.1.0
An internalMessage trap contains an informational message generated by the subagent.
                                   internalWarningSystemSubagent 1.3.6.1.4.1.231.7.2.1.21.2.1.1
An internalWarning trap contains a warning message generated by a subagent.
                                   internalErrorSystemSubagent 1.3.6.1.4.1.231.7.2.1.21.2.1.2
An internalError trap contains an error message generated by a subagent. After issuing this trap, the agent terminates.
                                   addHicom 1.3.6.1.4.1.231.7.2.1.21.2.1.10
An addHicom trap signifies that a new hicom has been added to network.
                                   deleteHicom 1.3.6.1.4.1.231.7.2.1.21.2.1.11
A deleteHicom trap signifies that a hicom has been removed from the network.
                                   changeConfig 1.3.6.1.4.1.231.7.2.1.21.2.1.12
A changeConfig trap indicates that some change other than adding or removing a Hicom has been made to the network.
                               hicomAlarmTraps 1.3.6.1.4.1.231.7.2.1.21.2.2
                                   internalMessageAlarmSubagent 1.3.6.1.4.1.231.7.2.1.21.2.2.0
An internalMessage trap contains an informational message generated by the subagent.
                                   internalWarningAlarmSubagent 1.3.6.1.4.1.231.7.2.1.21.2.2.1
An internalWarning trap contains a warning message generated by a subagent.
                                   internalErrorAlarmSubagent 1.3.6.1.4.1.231.7.2.1.21.2.2.2
An internalError trap contains an error message generated by a subagent. After issuing this trap, the agent terminates.
                                   hicomAlResetInitFailed 1.3.6.1.4.1.231.7.2.1.21.2.2.20
A hicomAlResetInitFailed trap signifies that the initialization of an alarm reset has failed.
                                   hicomAlUploadMirrorFailed 1.3.6.1.4.1.231.7.2.1.21.2.2.22
A hicomAlUploadMirrorFailed trap signifies that the initialization of an alarm reset has failed.
                                   hicomAlarmOnMajor 1.3.6.1.4.1.231.7.2.1.21.2.2.30
A hicomAlarmOnMajor trap is sent when a major alarm is set.
                                   hicomAlarmOffMajor 1.3.6.1.4.1.231.7.2.1.21.2.2.31
A hicomAlarmOffMajor trap is sent when a major alarm is reset.
                                   hicomAlarmOnMinor 1.3.6.1.4.1.231.7.2.1.21.2.2.32
A hicomAlarmOnMinor trap is sent when a minor alarm is set.
                                   hicomAlarmOffMinor 1.3.6.1.4.1.231.7.2.1.21.2.2.33
A hicomAlarmOffMinor trap is sent when a major alarm is reset.
                                   hicomAlarmOnDevice 1.3.6.1.4.1.231.7.2.1.21.2.2.34
A hicomAlarmOnDevice trap is sent when a device alarm is set.
                                   hicomAlarmOffDevice 1.3.6.1.4.1.231.7.2.1.21.2.2.35
A hicomAlarmOffDevice trap is sent when a device alarm is reset.
                               hicomErrorTraps 1.3.6.1.4.1.231.7.2.1.21.2.3
                                   internalMessageErrAlConfSubagent 1.3.6.1.4.1.231.7.2.1.21.2.3.0
An internalMessage trap contains an informational message generated by the subagent.
                                   internalWarningErrAlConfSubagent 1.3.6.1.4.1.231.7.2.1.21.2.3.1
An internalWarning trap contains a warning message generated by a subagent.
                                   internalErrorErrAlConfSubagent 1.3.6.1.4.1.231.7.2.1.21.2.3.2
An internalError trap contains an error message generated by a subagent. After issuing this trap, the agent terminates.
                                   hicomAlConfDiscovSucc 1.3.6.1.4.1.231.7.2.1.21.2.3.10
A hicomAlConfDiscovSucc trap indicates the successful termination of a discovery process. hicomAlConfDiscovPabxId indicates the Pbx involved.
                                   hicomAlConfDiscovErr 1.3.6.1.4.1.231.7.2.1.21.2.3.11
A hicomAlConfDiscovErr trap signifies the unsuccessful termination of a discovery process. hicomAlConfDiscovPabxId indicates the Pbx involved.
                                   hicomAlConfDiscovBusy 1.3.6.1.4.1.231.7.2.1.21.2.3.19
A hicomAlConfDiscovBusy trap signifies that a alarm conf discovery process is running. hicomAlConfDiscovPabxId indicates the Pbx involved.
                                   hicomErrorMsg 1.3.6.1.4.1.231.7.2.1.21.2.3.20
A Hicom error message trap contains information extracted from a Hicom error message
                               hicomAlConfTraps 1.3.6.1.4.1.231.7.2.1.21.2.4
                               hicomSWTraps 1.3.6.1.4.1.231.7.2.1.21.2.5
                                   internalMessageSWSubagent 1.3.6.1.4.1.231.7.2.1.21.2.5.0
An internalMessage trap contains an informational message generated by the subagent.
                                   internalWarningSWSubagent 1.3.6.1.4.1.231.7.2.1.21.2.5.1
An internalWarning trap contains a warning message generated by a subagent.
                                   internalErrorSWSubagent 1.3.6.1.4.1.231.7.2.1.21.2.5.2
An internalError trap contains an error message generated by a subagent. After issuing this trap, the agent terminates.
                                   hicomSoftDiscovSucc 1.3.6.1.4.1.231.7.2.1.21.2.5.10
A hicomSoftDiscovSucc trap indicates the successful termination of a discovery process. hicomSoftDiscovPabxId indicates the Pbx involved.
                                   hicomSoftDiscovErr 1.3.6.1.4.1.231.7.2.1.21.2.5.11
A hicomSoftDiscovErr trap signifies the unsuccessful termination of a discovery process. hicomSoftDiscovPabxId indicates the Pbx involved.
                                   hicomSoftDiscovBusy 1.3.6.1.4.1.231.7.2.1.21.2.5.19
A hicomSoftDiscovBusy trap signifies that a sw discovery process is running. hicomSoftDiscovPabxId indicates the Pbx involved.
                               hicomHWTraps 1.3.6.1.4.1.231.7.2.1.21.2.6
                                   internalMessageHWSubagent 1.3.6.1.4.1.231.7.2.1.21.2.6.0
An internalMessage trap contains an informational message generated by the subagent.
                                   internalWarningHWSubagent 1.3.6.1.4.1.231.7.2.1.21.2.6.1
An internalWarning trap contains a warning message generated by a subagent.
                                   internalErrorHWSubagent 1.3.6.1.4.1.231.7.2.1.21.2.6.2
An internalError trap contains an error message generated by a subagent. After issuing this trap, the agent terminates.
                                   hicomHWDiscovSucc 1.3.6.1.4.1.231.7.2.1.21.2.6.10
A hicomHWDiscovSucc trap signifies the successful termination of a discovery request / process. hicomHWDiscovPabxId: indicates the Pbx involved.
                                   hicomHWDiscovErr 1.3.6.1.4.1.231.7.2.1.21.2.6.11
A hicomHWDiscovErr trap signifies the unsuccessful termination of a discovery request / process. hicomHWDiscovPabxId: indicates the Pbx involved.
                                   hicomHWDiscovBusy 1.3.6.1.4.1.231.7.2.1.21.2.6.19
A hicomHWDiscovBusy trap signifies that a hw discovery process is running. hicomHWDiscovPabxId: indicates the Pbx involved.
                               hicomTopoTraps 1.3.6.1.4.1.231.7.2.1.21.2.7
                                   internalMessageTopoSubagent 1.3.6.1.4.1.231.7.2.1.21.2.7.0
An internalMessage trap contains an informational message generated by the subagent.
                                   internalWarningTopoSubagent 1.3.6.1.4.1.231.7.2.1.21.2.7.1
An internalWarning trap contains a warning message generated by a subagent.
                                   internalErrorTopoSubagent 1.3.6.1.4.1.231.7.2.1.21.2.7.2
An internalError trap contains an error message generated by a subagent. After issuing this trap, the agent terminates.
                                   hicomTopoDiscovSucc 1.3.6.1.4.1.231.7.2.1.21.2.7.10
A hicomTopoDiscovSucc trap signifies the successful termination of a discovery process. hicomTopoDiscovPabxId: indicates the Pbx involved.
                                   hicomTopoDiscovErr 1.3.6.1.4.1.231.7.2.1.21.2.7.11
A hicomTopoDiscovErr trap signifies the unsuccessful termination of a discovery process. hicomTopoDiscovPabxId: indicates the Pbx involved.
                                   hicomTopoDiscovBusy 1.3.6.1.4.1.231.7.2.1.21.2.7.19
A hicomTopoDiscovBusy trap signifies that a topo discovery process is running. hicomTopoDiscovPabxId: indicates the Pbx involved.
                               hicomSQLTraps 1.3.6.1.4.1.231.7.2.1.21.2.8
                                   internalMessageSQLSubagent 1.3.6.1.4.1.231.7.2.1.21.2.8.0
An internalMessage trap contains an informational message generated by the subagent.
                                   internalWarningSQLSubagent 1.3.6.1.4.1.231.7.2.1.21.2.8.1
An internalWarning trap contains a warning message generated by a subagent.
                                   internalErrorSQLSubagent 1.3.6.1.4.1.231.7.2.1.21.2.8.2
An internalError trap contains an error message generated by a subagent. After issuing this trap, the agent terminates.
                                   hicomSQLsessionFinished 1.3.6.1.4.1.231.7.2.1.21.2.8.20
A hicomSQLsessionFinished trap indicates the completion of an SQL query. If hicomSQLsessionState indicates an error in the query, hicomSQLsessionResultLines will contain the SQL error code instead of the number of resulting lines. In this case, no entry in the hicomSQLresultTable will be created.
                               hicomDiscTraps 1.3.6.1.4.1.231.7.2.1.21.2.9
                                   internalMessageDiscSubagent 1.3.6.1.4.1.231.7.2.1.21.2.9.0
An internalMessage trap contains an informational message generated by the subagent.
                                   internalWarningDiscSubagent 1.3.6.1.4.1.231.7.2.1.21.2.9.1
An internalWarning trap contains a warning message generated by a subagent.
                                   internalErrorDiscSubagent 1.3.6.1.4.1.231.7.2.1.21.2.9.2
An internalError trap contains an error message generated by a subagent. After issuing this trap, the agent terminates.
                                   hicomErrDeleteSucc 1.3.6.1.4.1.231.7.2.1.21.2.9.10
A hicomErrDeleteSucc trap indicates the successful termination of an Error Message Delete process. hicomErrDeletePabxId indicates the Pbx involved.
                                   hicomErrDeleteErr 1.3.6.1.4.1.231.7.2.1.21.2.9.11
A hicomErrDeleteErr trap signifies the unsuccessful termination of an Error Message Delete process. hicomErrDeletePabxId indicates the Pbx involved.
                                   hicomErrDeleteBusy 1.3.6.1.4.1.231.7.2.1.21.2.9.19
A hicomErrDeleteBusy trap signifies that an Error Message Delete process is running. hicomErrDeletePabxId indicates the Pbx involved.