SIAE-SOFT-MIB: View SNMP OID List / Download MIB

VENDOR: SIAE MICROELETTRONICA S.P.A.


 Home MIB: SIAE-SOFT-MIB
Download as:   
SNMPv2-CONF, SIAE-TREE-MIB, SIAE-ALARM-MIB, SNMPv2-SMI, SIAE-EQUIP-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
     softwareDownloadStatusTrap 1.3.6.1.4.1.3373.1103.0.701
This event is generated by ALFOHD-NE when the status of download is changed. The data passed with the event are: 1) equipIpSnmpAgentAddress 2) softwareDownloadStatus
 software 1.3.6.1.4.1.3373.1103.7
Maintenance of software releases loaded on SIAE equiment.
     softwareMibVersion 1.3.6.1.4.1.3373.1103.7.1 integer read-only
Numerical version of this module. The string version of this MIB have the following format: XX.YY.ZZ so, for example, the value 1 should be interpreted as 00.00.01 and the value 10001 should be interpreted as 01.00.01.
     softwareEquipmentReleaseBench1 1.3.6.1.4.1.3373.1103.7.2 displaystring read-only
ASCII string identifying the equipment release present in Bench1.
     softwareEquipmentReleaseBench1Status 1.3.6.1.4.1.3373.1103.7.3 integer read-only
Status of the bench 1 software. Enumeration: 'loaded': 2, 'running': 3, 'notLoaded': 1.
     softwareEquipmentReleaseBench2 1.3.6.1.4.1.3373.1103.7.4 displaystring read-only
ASCII string identifying the equipment release present in Bench2.
     softwareEquipmentReleaseBench2Status 1.3.6.1.4.1.3373.1103.7.5 integer read-only
Status of the bench 2 software. Enumeration: 'loaded': 2, 'running': 3, 'notLoaded': 1.
     softwareIpAddressDwlServer 1.3.6.1.4.1.3373.1103.7.6 ipaddress read-write
Ip address of the SNMP manager connected from which the Software is downloaded, if the leaf softwareRemoteIpAddressDwlServer is set '0.0.0.0'.
     softwareGosipAddressDwlServer 1.3.6.1.4.1.3373.1103.7.7 octet string read-write
GOSIP address of the remote element from which the Software is downloaded.
     softwareDownloadfile 1.3.6.1.4.1.3373.1103.7.8 displaystring read-write
CEM or LOM Directory and name of the descriptor file. The files with the SW code must be present in the same directory.
     softwareActionRequest 1.3.6.1.4.1.3373.1103.7.9 integer32 read-write
This Integer is a bit string with each bit when set has the following meaning: BIT 0 - Download request BIT 1 - Abort Download request BIT 2 - Bench switch request BIT 4 - Partial download BIT 5 - Forced Download BIT 6 - Implicit Activation BIT 7 - Delete bench not running BIT 8 - ODU FW download (whitout activation) BIT 9 - ODU FW activation BIT 10 - IDU FPGA download (whitout activation) BIT 11 - IDU FPGA activation The bit 4...6 enable/disable the different options on download request.
     softwareDownloadStatus 1.3.6.1.4.1.3373.1103.7.10 integer read-only
Status of SW download operation. Enumeration: 'completed': 2, 'downloading': 1, 'perifDownloading': 4, 'interrupted': 3, 'configurationDownloading': 5.
     softwareUnitTable 1.3.6.1.4.1.3373.1103.7.11 no-access
Table with Software records concerning units within the equipment.
           softwareUnitRecord 1.3.6.1.4.1.3373.1103.7.11.1 no-access
Software record.
               softwareUnitId 1.3.6.1.4.1.3373.1103.7.11.1.1 integer32 read-only
This object is used as Index of the softwareUnit Table and also identifies the unit in the equipment.
               softwareElementId 1.3.6.1.4.1.3373.1103.7.11.1.2 integer32 read-only
This object is used as Index of the softwareUnit Table and also identifies the SW programmable element in the specified unit.
               softwareType 1.3.6.1.4.1.3373.1103.7.11.1.3 integer read-only
Format type. Enumeration: 'image-FPGA': 2, 's-record': 1, 'volatile': 3.
               softwareUnitReleaseBench1 1.3.6.1.4.1.3373.1103.7.11.1.4 displaystring read-only
ASCII string identifying the software release present in the programmable element of specified unit bench 1.
               softwareUnitReleaseBench2 1.3.6.1.4.1.3373.1103.7.11.1.5 displaystring read-only
ASCII string identifying the software release present in the programmable element of specified unit bench 2.
               softwareUnitActualRelease 1.3.6.1.4.1.3373.1103.7.11.1.6 displaystring read-only
ASCII string identifying the software release actually present in the programmable element of specified unit.
     softwareDownloadStatusTrapNotification 1.3.6.1.4.1.3373.1103.7.12 integer read-write
Enables/disables the trap generation on download status change. Enumeration: 'trapDisable': 1, 'trapEnable': 2, 'trapEnableWithACK': 34.
     softwareRemoteIpAddressDwlServer 1.3.6.1.4.1.3373.1103.7.13 ipaddress read-write
Ip address of the remote Server from which the Software is downloaded, different from SNMP manager connected IpAddress. It is used if different from '0.0.0.0'. After each download procedure the leaf is set to '0.0.0.0'.