SHIVA-SLOT-MIB: View SNMP OID List / Download MIB

VENDOR: SHIVA CORPORATION


 Home MIB: SHIVA-SLOT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, SHIVA-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 internalSlotTable 1.3.6.1.4.1.166.1.18.1 no-access
A table of internal slots.
     internalSlotEntry 1.3.6.1.4.1.166.1.18.1.1 no-access
Internal slot parameters.
         internalSlotIndex 1.3.6.1.4.1.166.1.18.1.1.1 integer read-only
Slot number for this slot in the server. The range is (1..1) for a NetModem, (1..8) for a LanRover, and (1..11) for a LanRover Access Switch.
         internalSlotType 1.3.6.1.4.1.166.1.18.1.1.2 integer read-only
Internal slot class. This is the generic type of the device in the slot. Enumeration: 'wan': 21, 'lan': 22, 'dmc': 23, 'bri-': 8, 'usart': 7, 'uart': 3, 'unknown': 2, 'shiva-16-v34-modem-card': 25, 'bri-st': 6, 'uartcard': 24, 'switched56': 5, 'modem': 4, 'cp': 20, 'empty': 1.
         internalSlotName 1.3.6.1.4.1.166.1.18.1.1.3 displaystring read-only
Internal slot name. This is the name of the device in the slot.
         internalSlotFirmRev 1.3.6.1.4.1.166.1.18.1.1.4 displaystring read-only
Internal slot firmware revision.
         internalSlotHWRev 1.3.6.1.4.1.166.1.18.1.1.5 displaystring read-only
Internal slot hardware/datapump revision. It is the hardware revision for all values of internalSlotType except modem, where it is the datapump version.
         internalSlotStatus 1.3.6.1.4.1.166.1.18.1.1.6 integer read-write
Internal slot status. Writing the value to init(2) will re-initialize the device. Enumeration: 'needscode': 5, 'adminbusy': 8, 'admindown': 7, 'unknown': 1, 'downloader': 6, 'dead': 4, 'init': 2, 'alive': 3.
         internalSlotNumLines 1.3.6.1.4.1.166.1.18.1.1.7 integer read-only
Number of lines or channels supported on this internal slot.
         internalSlotSwitch 1.3.6.1.4.1.166.1.18.1.1.8 integer read-only
ISDN switch type on this slot, if internalSlotType is bri-st or bri-u. Otherwise 0. Enumeration: 'fetex150': 16, 'itr6': 13, 'ess5': 5, 'ess4': 4, 'ins64': 14, 'unknown': 1, 'nat1': 10, 'dms250': 3, 'vn6': 8, 'cr22': 9, 'vn3': 7, 'vn2': 6, 'nat2': 11, 'btnr191': 17, 'dms100': 2, 'austel': 15, 'euro': 12.
         internalSlotDchanStat 1.3.6.1.4.1.166.1.18.1.1.9 integer read-only
ISDN D channel status, if internalSlotType is bri-st or bri-u. Otherwise 0. Enumeration: 'invalidprofile': 8, 'unknown': 1, 'layer2-active': 4, 'dead': 2, 'layer1-active': 3, 'userid-assigned': 6, 'q931-active': 7, 'tei-assigned': 5.
         internalSlotCardType 1.3.6.1.4.1.166.1.18.1.1.10 integer read-only
The specific type of card in this slot. Note that for the pri-isa cards that 'pri' refers to the manufacturer (Primary Rate Inc., now part of Xircom). Similarly, 'shiva' and 'fujitsu' refer to card manufacturers in the context of this enumeration. Enumeration: 'bri-': 8, 'ibm-token-ring': 20, 'pri-isa48': 13, 'shiva-pci32': 29, 'netaccess-pci8b': 43, 'shiva-ethernet-v1': 16, 'shiva-dmc1256k': 30, 'v34-flash-modem': 24, 'v34-modem': 4, 'shiva-ethernet-10-100': 27, 'shiva-hdmc-v90': 50, 'v32bis-modem': 3, 'sync-async': 6, 'unknown': 2, 'shiva-pci-dser': 31, 'shiva-pci48': 21, 'pri-isa32': 12, 'bri-st': 7, 'shiva-pci64': 22, 'none': 1, 'shiva-pci24': 28, 'pri-isa8b': 18, 'shiva-68060-cp': 10, 'async': 5, 'shiva-dmc-v1': 15, 'fujistu-ethernet': 17, 'v90-flash-modem': 44, 'shiva-16-v34-modem': 32, 'pri-isa64': 14, 'shiva-pci96': 23, 'pri-isa24': 11, 'pri-generic': 19, 'shiva-68040-cp': 9.
         internalSlotBusType 1.3.6.1.4.1.166.1.18.1.1.11 integer read-only
Type of bus connector(s) available in this internal slot. Enumeration: 'none': 1, 'pci': 3, 'mic': 2, 'pci-isa': 4.
         internalSlotCardBusType 1.3.6.1.4.1.166.1.18.1.1.12 integer read-only
The type of bus connector on the card in this internal slot. Enumeration: 'isa': 4, 'pci': 3, 'none': 1, 'mic': 2.
 slotLineTable 1.3.6.1.4.1.166.1.18.2 no-access
A table of internal slots and lines, allowing cross-referencing between physical (slot/line) and logical (ifIndex) addressing.
     slotLineEntry 1.3.6.1.4.1.166.1.18.2.1 no-access
Internal slot and line data.
         slSlot 1.3.6.1.4.1.166.1.18.2.1.1 integer read-only
The slot number of the slot that this line or unit is in.
         slLine 1.3.6.1.4.1.166.1.18.2.1.2 integer read-only
The line (or unit) within a slot that this line (or unit) is.
         slType 1.3.6.1.4.1.166.1.18.2.1.3 integer read-only
Type of entity in this slot/line or slot/unit. Enumeration: 'v32bis-modem': 3, 'v34-dmc-modem': 5, 'token-ring': 10, 'sync': 2, 't1': 7, 'bri': 9, 'async': 1, 'ethernet': 6, 'v90-dmc-modem': 12, 'e1': 8, 'high-speed-sync': 11, 'v34-modem': 4.
         slIfIndex 1.3.6.1.4.1.166.1.18.2.1.4 integer read-only
The ifIndex of the entry in the ifTable in the RFC1213-MIB (MIB-II) that represents this entity.
         slAdminType 1.3.6.1.4.1.166.1.18.2.1.5 integer read-only
This bitmap describes the administrative capabilities of each line, and is the sum of the capabilities. Set any bits that are appropriate. Enumeration: 'down': 2, 'gracefuldown': 8, 'testing': 4, 'up': 1.
         slAdminStatus 1.3.6.1.4.1.166.1.18.2.1.6 integer read-write
The desired state of the interface. The testing(3) state indicates that no operational packets can be passed. When a managed system initializes, all interfaces start in the down(2) state. As a result of either explicit management action or per configuration information retained by the managed system, callWanInterfaceAdminStatus is then changed to either the up(1) or testing(3) states (or remains in the down(2) state) Use gracefuldown(4) to cause the system to wait for all timeslots on the wan interface to go down before bringing down the wan interface. Enumeration: 'down': 2, 'gracefuldown': 4, 'testing': 3, 'up': 1.
         slOperStatus 1.3.6.1.4.1.166.1.18.2.1.7 integer read-only
The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. If slAdminStatus is down(2) then slOperStatus should be down(2). If slAdminStatus is changed to up(1) then slOperStatus should change to up(1) if the interface is ready to transmit and receive network traffic; it should change to dormant(5) if the interface is waiting for external actions (such as a serial line waiting for an incomming connection); it should remain in the down(2) state if and only if there is a fault that prevents if from going to the up(1) state. Enumeration: 'down': 2, 'unknown': 4, 'testing': 3, 'up': 1, 'dormant': 5.