SHIVA-LOG-MIB: View SNMP OID List / Download MIB

VENDOR: SHIVA CORPORATION


 Home MIB: SHIVA-LOG-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, SHIVA-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 logCount 1.3.6.1.4.1.166.1.6.1 integer read-only
The number of entries currently in the message log buffer.
 logTrapPriority 1.3.6.1.4.1.166.1.6.2 integer read-write
Enables or disables the generation of logNewMessage Traps of a priority numerically equal or lower than the value of this variable. Enumeration: 'info': 8, 'notice': 7, 'err': 5, 'alert': 3, 'disabled': 1, 'crit': 4, 'emerg': 2, 'debug': 9, 'warning': 6.
 logBufferTable 1.3.6.1.4.1.166.1.6.3 no-access
A list of message log entries.
     logBufferEntry 1.3.6.1.4.1.166.1.6.3.1 no-access
An entry in the message log. Entries are indexed by counting integers. Since the earliest messages are dropped from the log when it overflows, the first row in the table is not necessarily row 1. Therefore, a Get-Next request should be issued to determine the index of the first row.
         logBufferSequence 1.3.6.1.4.1.166.1.6.3.1.1 integer read-only
Ordinal position in the Log Buffer.
         logBufferPriority 1.3.6.1.4.1.166.1.6.3.1.2 integer read-only
The priority of the log message. Enumeration: 'info': 8, 'notice': 7, 'not-possible': 1, 'err': 5, 'alert': 3, 'crit': 4, 'emerg': 2, 'debug': 9, 'warning': 6.
         logBufferFacility 1.3.6.1.4.1.166.1.6.3.1.3 integer read-only
The Facility which generated the log message. Enumeration: 'audit': 13, 'default': 1, 'config': 17, 'system': 16, 'atalk': 10, 'init': 8, 'fileIO': 22, 'dialout': 19, 'dnet': 11, 'serial': 18, 'nw': 12, 'callControl': 21, 'inet': 9, 'ltl': 20.
         logBufferTimeOfDay 1.3.6.1.4.1.166.1.6.3.1.4 integer read-only
The time of day at which the message is logged. This is expressed in seconds.
         logBufferTimeStamp 1.3.6.1.4.1.166.1.6.3.1.5 timeticks read-only
The time the message was generated, measured in number of ticks since the device started.
         logBufferText 1.3.6.1.4.1.166.1.6.3.1.6 displaystring read-only
The text of the log message.
         logBufferPort 1.3.6.1.4.1.166.1.6.3.1.7 displaystring read-only
The Serial Port associated the log message. Only valid when logBufferFacility is audit(13).
         logBufferUser 1.3.6.1.4.1.166.1.6.3.1.8 displaystring read-only
The User associated the log message. Only valid when logBufferFacility is audit(13).
 logSavePriority 1.3.6.1.4.1.166.1.6.4 integer read-write
This variable indicates the lowest (numerically highest) priority message (as indicated by logBufferPriority) which will be save in the logBufferTable. Enumeration: 'info': 8, 'none': 1, 'err': 5, 'notice': 7, 'alert': 3, 'crit': 4, 'emerg': 2, 'debug': 9, 'warning': 6.
 logClear 1.3.6.1.4.1.166.1.6.5 integer read-write
Indicates whether the log buffer is non-empty. Clears the log buffer when written with clear(2). Enumeration: 'notClear': 1, 'clear': 2.
   logNewMessage 1.3.6.1.4.1.166.2.30.1
This trap is generated when an new message of priority at or higher than logTrapPriority is generated, and SNMP trapping is enabled.