SHIVA-L2F-MIB: View SNMP OID List / Download MIB

VENDOR: SHIVA CORPORATION


 Home MIB: SHIVA-L2F-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, SHIVA-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 l2fNetworkAccessServer 1.3.6.1.4.1.166.1.26.1
 l2fHomeGateway 1.3.6.1.4.1.166.1.26.2
     l2fHGConf 1.3.6.1.4.1.166.1.26.2.1
         l2fHGConfEnabled 1.3.6.1.4.1.166.1.26.2.1.1 integer read-only
Whether L2F Home Gateway functionality is enabled on this system. Enumeration: 'disabled': 2, 'enabled': 1.
         l2fHGConfMaximumCalls 1.3.6.1.4.1.166.1.26.2.1.2 integer read-only
The maximum number of incoming L2F calls that may be active on this Home Gateway at any one time. Any attempt to create a call in excess if this number will be rejected.
         l2fHGConfUDPEnabled 1.3.6.1.4.1.166.1.26.2.1.3 integer read-only
Whether L2F Home Gateway functionality is enabled over the UDP protocol on port 1701 on this system. Enumeration: 'disabled': 2, 'enabled': 1.
         l2fHGConfNASDefined 1.3.6.1.4.1.166.1.26.2.1.4 integer read-only
Indicates the number of peer NASs which have been configured on this Home Gateway. This value represents the number of NAS entries in the configuration table (ie. number of VPDNInterface sections).
         l2fHGConfInactivityRetries 1.3.6.1.4.1.166.1.26.2.1.5 integer read-only
Indicates the number of times this Home Gateway will send L2F_ECHO packets without receiving a response, that is, an L2F_ECHO_REPLY from the NAS peer before determining the tunnel is no longer active.
         l2fHGConfInactivityRetryPeriod 1.3.6.1.4.1.166.1.26.2.1.6 integer read-only
Indicates the number seconds that must elapse since the last NAS peer packet was received by this Home Gateway before an L2F_ECHO packet is generated.
         l2fHGConfTunnelTable 1.3.6.1.4.1.166.1.26.2.1.8 no-access
Table of configuration information for each incoming VPDN tunnel. The table is indexed by NAS name.
             l2fHGConfTunnelEntry 1.3.6.1.4.1.166.1.26.2.1.8.1 no-access
Configuration information for a particular VPDN tunnel.
                 l2fHGConfTunnelNASName 1.3.6.1.4.1.166.1.26.2.1.8.1.1 displaystring read-only
Name of NAS that we are configured to receive L2F tunnel connections from. Although this name may match the peer's DNS host name, it is not required to. This name corresponds to the PeerName entry in the associated VPDNInterface section.
                 l2fHGConfTunnelHGName 1.3.6.1.4.1.166.1.26.2.1.8.1.2 displaystring read-only
Name of Home Gateway registered on this tunnel.
                 l2fHGConfTunnelSectionNumber 1.3.6.1.4.1.166.1.26.2.1.8.1.3 integer read-only
ID that identifies this tunnel in the configuration table.
                 l2fHGConfTunnelEnabled 1.3.6.1.4.1.166.1.26.2.1.8.1.4 integer read-only
Indicates if this VPDN tunnel is enabled or not. Enumeration: 'disabled': 2, 'enabled': 1.
     l2fHGStat 1.3.6.1.4.1.166.1.26.2.2
         l2fHGStatCurrentCalls 1.3.6.1.4.1.166.1.26.2.2.1 integer read-only
Current number of incoming L2F client calls to this Home Gateway. Cannot ever be greater than l2fHGConfMaximumCalls.
         l2fHGStatPeakCalls 1.3.6.1.4.1.166.1.26.2.2.2 integer read-only
Peak number of incoming L2F client calls to this Home Gateway. Cannot ever be greater than l2fHGConfMaximumCalls.
         l2fHGStatTotalCalls 1.3.6.1.4.1.166.1.26.2.2.3 counter read-only
Total number of incoming L2F client calls to this Home Gateway over time.
         l2fHGStatCallsOverMax 1.3.6.1.4.1.166.1.26.2.2.4 counter read-only
Number of incoming L2F client calls to this Home Gateway that were rejected because they were in excess of l2fHGConfMaximumCalls.
         l2fHGStatCallsResourceFailure 1.3.6.1.4.1.166.1.26.2.2.5 counter read-only
Number of incoming L2F client calls to this Home Gateway that were rejected because of miscellaneous resource allocation failures.
         l2fHGStatCallsAuthFailed 1.3.6.1.4.1.166.1.26.2.2.6 counter read-only
Number of incoming L2F client calls to this Home Gateway that were rejected because of authentication or permission failures for the user.
         l2fHGStatCurrentTunnels 1.3.6.1.4.1.166.1.26.2.2.7 integer read-only
Current number of incoming L2F Network Access Server peer tunnels to this Home Gateway.
         l2fHGStatPeakTunnels 1.3.6.1.4.1.166.1.26.2.2.8 integer read-only
Peak number of incoming L2F Network Access Server peer tunnels to this Home Gateway at any given time.
         l2fHGStatTotalTunnels 1.3.6.1.4.1.166.1.26.2.2.9 counter read-only
Total number of incoming L2F Network Access Server peer tunnels to this Home Gateway.
         l2fHGStatTunnelNoName 1.3.6.1.4.1.166.1.26.2.2.10 counter read-only
Number of incoming L2F Network Access Server peer tunnels to this Home Gateway that were rejected because the NAS name was unknown.
         l2fHGStatTunnelAuthFail 1.3.6.1.4.1.166.1.26.2.2.11 counter read-only
Number of incoming L2F Network Access Server peer tunnels to this Home Gateway that were rejected because the NAS credentials could not be authenticated.
         l2fHGStatTunnelResourceFailure 1.3.6.1.4.1.166.1.26.2.2.12 counter read-only
Number of incoming L2F Network Access Server peer tunnels to this Home Gateway that were rejected because of a miscellaneous resource allocation failure.
         l2fHGPeerTable 1.3.6.1.4.1.166.1.26.2.2.13 no-access
This is a table of every L2F NAS tunnel peer that has ever contacted this Home Gateway. This table is indexed by the ifIndex of the 'primary' ifTable entry for the tunnels for this peer. This information will remain in the system until the next system restart.
               l2fHGPeerEntry 1.3.6.1.4.1.166.1.26.2.2.13.1 no-access
Status and counter information about this particular NAS tunnel peer.
                   l2fHGPeerIfIndex 1.3.6.1.4.1.166.1.26.2.2.13.1.1 integer read-only
The ifIndex of the primary (permanent) ifTable entry for tunnels from this peer. This value is used to access the NAS peer entry in the l2fHGPeerTable.
                   l2fHGPeerEnabled 1.3.6.1.4.1.166.1.26.2.2.13.1.2 integer read-only
Indicates if this particular NAS peer is configured to create tunnels with this Home Gateway. Enumeration: 'disabled': 2, 'enabled': 1.
                   l2fHGPeerNASName 1.3.6.1.4.1.166.1.26.2.2.13.1.3 displaystring read-only
Name of the peer NAS server. The NAS name is also the index into the l2fHGConfTunnelTable for this NAS peer.
                   l2fHGPeerCurrentTunnels 1.3.6.1.4.1.166.1.26.2.2.13.1.4 integer read-only
Current number of incoming tunnels from this NAS.
                   l2fHGPeerPeakTunnels 1.3.6.1.4.1.166.1.26.2.2.13.1.5 counter read-only
The maximum number of incoming tunnels from this NAS peer at any one time.
                   l2fHGPeerTotalTunnels 1.3.6.1.4.1.166.1.26.2.2.13.1.6 counter read-only
Total number of incoming tunnels that have been created from this NAS. In this context, tunnels are equivalent to the Client ID (CLID).
                   l2fHGPeerCurrentClients 1.3.6.1.4.1.166.1.26.2.2.13.1.7 integer read-only
Current number of clients that have established a session on this tunnel.
                   l2fHGPeerPeakClients 1.3.6.1.4.1.166.1.26.2.2.13.1.8 counter read-only
The maximum number of clients which have established a session on this tunnel at any one time.
                   l2fHGPeerTotalClients 1.3.6.1.4.1.166.1.26.2.2.13.1.9 counter read-only
The total number of clients that have established a session on this tunnel since the tunnel was created.
                   l2fHGPeerTunnelAuthFailed 1.3.6.1.4.1.166.1.26.2.2.13.1.10 counter read-only
Number of tunnels rejected by this Home Gateway because NAS secret incorrect.
                   l2fHGPeerTunnelMiscFailed 1.3.6.1.4.1.166.1.26.2.2.13.1.11 counter read-only
Number of tunnels that failed to open for other reasons.
                   l2fHGPeerTunnelKeepAliveFailed 1.3.6.1.4.1.166.1.26.2.2.13.1.12 counter read-only
Number of tunnels torn down by this Home Gateway due to failure of keep-alive monitoring. In the context of this variable, the keep-alive mechanism is an exchange of L2F_ECHO (sent by the HG) and L2F_ECHO_REPLY (sent by NAS) packets.
                   l2fHGPeerTunnelProtocolViolations 1.3.6.1.4.1.166.1.26.2.2.13.1.13 counter read-only
Number of tunnels torn down by the Home Gateway due to protocol violations.
                   l2fHGPeerTunnelLastCloseTime 1.3.6.1.4.1.166.1.26.2.2.13.1.14 timeticks read-only
The value of sysUpTime at the time a tunnel from this NAS peer last closed. This is only an interesting number if l2fHGPeerCurrentTunnels is zero. It is kept here because the ifEntry for the tunnels are volatile, and go away when they close. Therefore, one cannot determine this information by looking at ifLastChange.
         l2fHGTunnelTable 1.3.6.1.4.1.166.1.26.2.2.14 no-access
Table consisting of all of the currently active NAS tunnels. This table augments the ifTable. Each row in this table has a row in the ifTable of ifType 'propVirtual'. The table is indexed by l2fHGTunnelCLID. Note that rows in this table come and go as the tunnels open and close.
               l2fHGTunnelEntry 1.3.6.1.4.1.166.1.26.2.2.14.1 no-access
Information concerning a particular active NAS tunnel.
                   l2fHGTunnelCLID 1.3.6.1.4.1.166.1.26.2.2.14.1.1 integer read-only
The local client identifier for this tunnel.
                   l2fHGTunnelPeerCLID 1.3.6.1.4.1.166.1.26.2.2.14.1.2 integer read-only
The NAS peer's client identifier for this tunnel.
                   l2fHGTunnelHGName 1.3.6.1.4.1.166.1.26.2.2.14.1.3 displaystring read-only
This Home Gateway's name.
                   l2fHGTunnelNASName 1.3.6.1.4.1.166.1.26.2.2.14.1.4 displaystring read-only
The name of the NAS peer on this tunnel.
                   l2fHGTunnelReceiveChecksum 1.3.6.1.4.1.166.1.26.2.2.14.1.5 integer read-only
Indicates if the NAS peer will be generating checksums for the L2F payload received by this Home Gateway. Enumeration: 'disabled': 2, 'enabled': 1.
                   l2fHGTunnelGenerateChecksum 1.3.6.1.4.1.166.1.26.2.2.14.1.6 integer read-only
Indicates if this Home Gateway will be generating checksums for the L2F payload sent to the NAS peer. Enumeration: 'disabled': 2, 'enabled': 1.
                   l2fHGTunnelIfIndex 1.3.6.1.4.1.166.1.26.2.2.14.1.7 integer read-only
The ifIndex of this tunnel in the ifTable.
                   l2fHGTunnelPeerIndex 1.3.6.1.4.1.166.1.26.2.2.14.1.8 integer read-only
This is the index into the l2fHGPeerTable. This index should be identical to the value in l2fHGTunnelIfIndex. However, if it is not, then this indicates that the NAS peer (using the same NAS name) has created multiple tunnels to this Home Gateway.
                   l2fHGTunnelTransport 1.3.6.1.4.1.166.1.26.2.2.14.1.9 integer read-only
The underlying transport interface which this tunnel is communicating with the NAS peer. Enumeration: 'x25': 4, 'unknown': 1, 'udp': 2, 'framerelay': 3.
                   l2fHGTunnelIpAddress 1.3.6.1.4.1.166.1.26.2.2.14.1.10 ipaddress read-only
The IP address of the NAS peer. This value is non-zero if this tunnel is operating over UDP. Refer to l2fHGTunnelTransport to determine which transport this tunnel is communicating over.
                   l2fHGTunnelCurrentState 1.3.6.1.4.1.166.1.26.2.2.14.1.13 integer read-only
Current tunnel state. These are the primary states that have been defined for the Home Gateway side in the L2F internet draft. Enumeration: 'close1': 6, 'undefined': 1, 'start0': 2, 'start1': 3, 'open1': 4, 'open2': 5.
                   l2fHGTunnelCurrentClients 1.3.6.1.4.1.166.1.26.2.2.14.1.14 integer read-only
Current number of clients accessing this tunnel.
                   l2fHGTunnelPeakClients 1.3.6.1.4.1.166.1.26.2.2.14.1.15 counter read-only
Peak number of clients accessing this tunnel at any given point in time.
                   l2fHGTunnelTotalClients 1.3.6.1.4.1.166.1.26.2.2.14.1.16 counter read-only
Total number of clients that have communicated over this tunnel while the tunnel was active.
                   l2fHGTunnelMaxLinkInactivity 1.3.6.1.4.1.166.1.26.2.2.14.1.17 integer read-only
The maximum amount of time that can elapse (in seconds) since the last NAS peer packet was received before this Home Gateway will tear down the tunnel.
                   l2fHGTunnelCurrentLinkInactivity 1.3.6.1.4.1.166.1.26.2.2.14.1.18 integer read-only
The amount of time that has elapsed (in seconds) since the last NAS peer packet was received. When the Home Gateway has not heard from the NAS peer in a period of time, it will generate L2F_ECHO packets to determine if the NAS is still alive. Once the inactivity reaches l2fHGTunnelMaxLinkInactivity, the Home Gateway will tear down the link.
                   l2fHGTunnelSequenceErrors 1.3.6.1.4.1.166.1.26.2.2.14.1.19 counter read-only
The number of L2F control packets that were received on this tunnel, by this Home Gateway out of sequence.
                   l2fHGTunnelEchoSent 1.3.6.1.4.1.166.1.26.2.2.14.1.20 counter read-only
Number of L2F_ECHO packets sent. This typically occurs when this Home Gateway has not received any data from the NAS peer over a period of time on this tunnel.
                   l2fHGTunnelEchoReceived 1.3.6.1.4.1.166.1.26.2.2.14.1.21 counter read-only
Number of L2F_ECHO packets received. The NAS peer will send this packet to determine if this Home Gateway is still alive.
                   l2fHGTunnelEchoReplySent 1.3.6.1.4.1.166.1.26.2.2.14.1.22 counter read-only
Number of L2F_ECHO_REPLY packets sent. The Home Gateway sends this packets in response to the L2F_ECHO packet sent by the NAS peer.
                   l2fHGTunnelEchoReplyReceived 1.3.6.1.4.1.166.1.26.2.2.14.1.23 counter read-only
Number of L2F_ECHO_REPLY packets received. The NAS peer sends this packet in response to the L2F_ECHO packet sent by this Home Gateway.
         l2fHGClientTable 1.3.6.1.4.1.166.1.26.2.2.15 no-access
This table contains status information concerning the clients' currently operating over tunnels connected to this Home Gateway. This table is indexed by the Client ID (CLID) and the non-zero MID. This table augments the ifTable. Each row in this table has a corresponding row in the ifTable of ifType 'propVirtual'.
               l2fHGClientEntry 1.3.6.1.4.1.166.1.26.2.2.15.1 no-access
Status information for a particular client operating over a tunnel connected to this Home Gateway.
                   l2fHGClientCLID 1.3.6.1.4.1.166.1.26.2.2.15.1.1 integer read-only
Local Client Identifier for the NAS tunnel underlying this entry. This is one of the two indexes used to access this entry in the table.
                   l2fHGClientMID 1.3.6.1.4.1.166.1.26.2.2.15.1.2 integer read-only
The Multiplex ID which identifies a particular connection within the tunnel. This is one of the two indexes used to access this entry in the table.
                   l2fHGClientPeerCLID 1.3.6.1.4.1.166.1.26.2.2.15.1.3 integer read-only
Peer Client Identifier for the NAS tunnel underlying this entry.
                   l2fHGClientTunnelState 1.3.6.1.4.1.166.1.26.2.2.15.1.4 integer read-only
Current client state. These are the primary states that have been defined for the Home Gateway side in the L2F internet draft. Enumeration: 'close2': 5, 'close3': 6, 'close1': 4, 'undefined': 1, 'start0': 2, 'open1': 3.
                   l2fHGClientIfIndex 1.3.6.1.4.1.166.1.26.2.2.15.1.5 integer read-only
The ifIndex of the NAS peer tunnel (L2F client connection) in the ifTable.
                   l2fHGClientOpenName 1.3.6.1.4.1.166.1.26.2.2.15.1.6 displaystring read-only
The name received from the client in the L2F_OPEN_NAME option.
                   l2fHGClientReqLcp0 1.3.6.1.4.1.166.1.26.2.2.15.1.7 octet string read-only
Specifies a copy of the initial LCP CONFIGURE-REQUEST packet sent from the PPP client, as sent by the NAS to the HG in the L2F_REQ_LCP0 option. This request may contain options that were negotiated away by the NAS. The information starts after the length field in the LCP header, and contains LCP options only.
                   l2fHGClientAckLcp1 1.3.6.1.4.1.166.1.26.2.2.15.1.8 octet string read-only
Specifies a copy of the closing LCP CONFIGURE-ACK packet sent by the PPP client, as sent by the NAS to the HG in the L2F_ACK_LCP1 option. The information starts after the length field in the LCP header, and contains LCP options only.
                   l2fHGClientAckLcp2 1.3.6.1.4.1.166.1.26.2.2.15.1.9 octet string read-only
Specifies a copy of the closing LCP CONFIGURE-ACK packet sent to the PPP client, as sent by the NAS to the HG in the L2F_ACK_LCP2 option. The information starts after the length field in the LCP header, and contains LCP options only.
                   l2fHGClientOpenType 1.3.6.1.4.1.166.1.26.2.2.15.1.10 integer read-only
Specifies the type of authentication the NAS exchanged with the client in detecting the client's claimed identification. Enumeration: 'slip-textual': 1, 'ppp-pap': 3, 'ppp-none': 4, 'slip-none': 5, 'ppp-chap': 2.
                   l2fHGClientSequenceEnabled 1.3.6.1.4.1.166.1.26.2.2.15.1.11 integer read-only
Indicates if sequenced packet delivery is enabled for DATA packets. Sequenced packets allow the receiver to determine if a packet is a duplicate or is out of order. Some PPP protocols assume that PPP will never re-order packets, so enabling L2F data sequencing protects against re-ordering between the NAS and HG network. Enumeration: 'disabled': 2, 'enabled': 1.
                   l2fHGClientSequenceErrors 1.3.6.1.4.1.166.1.26.2.2.15.1.12 counter read-only
If sequenced packet delivery is enabled for DATA packets (see l2fHGClientSequenceEnabled), this value indicates how many packets were received out of sequence.