SHIVA-AT-MIB: View SNMP OID List / Download MIB

VENDOR: SHIVA CORPORATION


 Home MIB: SHIVA-AT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, SHIVA-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 tRTMPEntryTimeouts 1.3.6.1.4.1.166.4.2.1 integer read-only
The number of entries which were removed from routing table because the aging algorithm indicated that they were invalid.
 tRTMPEntryDeletes 1.3.6.1.4.1.166.4.2.2 integer read-only
The number of entries which were removed from the routing table for any reason other than aging, for instance, due to a command from a Network Management station.
 tRTMPEntryEqualReplaces 1.3.6.1.4.1.166.4.2.3 integer read-only
The number of entries whose route was replaced by another route with the same hop count.
 tRTMPEntryBetterReplaces 1.3.6.1.4.1.166.4.2.4 integer read-only
The number of entries whose route was replaced by another route with a lower hop count.
 tRTMPEntryAdds 1.3.6.1.4.1.166.4.2.5 integer read-only
The number of new entries which have been added to the table.
 tRTMPZeroCounters 1.3.6.1.4.1.166.4.2.6 integer read-write
Writing this variable causes all the RTMP variables in this group to be set to zero. Enumeration: 'zero': 1.
 tZIPDeletes 1.3.6.1.4.1.166.4.2.7 integer read-only
The number of Zones which have been deleted from the Zone Table.
 tZIPAdds 1.3.6.1.4.1.166.4.2.8 integer read-only
The number of Zones which have been added to the Zone Table.
 tZIPZeroCounters 1.3.6.1.4.1.166.4.2.9 integer read-write
Writing this variable causes all the ZIP variables in this group to be set to zero. Enumeration: 'zero': 1.
 tAARPClearCache 1.3.6.1.4.1.166.4.2.10 integer read-write
Writing this variable clears the AARP Cache. Enumeration: 'clear': 1.
 tKIPRoutesValid 1.3.6.1.4.1.166.4.2.11 integer read-write
This variable can be used to force KIP to reacquire its configuration information. Enumeration: 'valid': 1, 'invalid': 2.
 tNBPDeviceObject 1.3.6.1.4.1.166.4.2.12 octet string read-only
The NBP name used to advertise this device's primary NVE on the LAN interface.
 tNBPDeviceType 1.3.6.1.4.1.166.4.2.13 octet string read-only
The NBP type used to advertise this device's primary NVE on the LAN interface.
 tNBPDeviceZone 1.3.6.1.4.1.166.4.2.14 octet string read-only
The zone in which this device registers its primary NVE on the LAN interface.
 tNBPDeviceSocket 1.3.6.1.4.1.166.4.2.15 integer read-only
The DDP socket number used by the device in NBP Responses for its primary NVE registered on the LAN interface.
 tATDialinNetwork 1.3.6.1.4.1.166.4.2.16 octet string read-only
The AppleTalk network number in which AppleTalk dialin users appear. When tATDialInPacketDeliveryMode is routing(1) this value corresponds to the configured dialin network number. When tATDialInPacketDeliveryMode is endNodeForwarding(2) this value corresponds to the network number of the LAN interface. Note that when endNodeForwarding(2) it is possible that not all dialin clients have addresses on this network because there may not have been enough available node ids to obtain addresses for all of the clients. In this case another network in the extended range of the LAN interface may be used for the remaining clients' addresses. Ideally this should be a table of clients with their dialin addresses.
 tATDialinZone 1.3.6.1.4.1.166.4.2.17 octet string read-only
The zone with which tATDialinNetwork is associated.
 tATRoutingMode 1.3.6.1.4.1.166.4.2.18 integer read-only
The routing behavior of this device for AppleTalk. If the device is configured as conformingRouter(1) or seedRouter(2) then it will behave as an AppleTalk router on the LAN interface, and will route packets to all interfaces. If it is a conformingRouter(1) then it will learn its configuration for the LAN interface from other routers on that interface's directly-connected network. If it is a seedRouter(2) then it will use the configured LAN interface parameters. If the device is configured as endNode(3) it will behave as an AppleTalk endnode on the LAN interface. other(4) is provided in the event a value is returned which does not match any of the other enumerated values. It is not expected that this will happen. Enumeration: 'endNode': 3, 'other': 4, 'conformingRouter': 1, 'seedRouter': 2.
 tATDialinPacketDeliveryMode 1.3.6.1.4.1.166.4.2.19 integer read-only
The method used to deliver packets to and from Appletalk dialin clients. If the device is configured as routing(1) it will use routing tables to deliver packets to and from dialin clients, which will be homed on an internal virtual interface (port). Technically, the value routing(1) is only valid if the device is acting as a router (the value of tATRoutingMode is conformingRouter(1) or seedRouter(2)). If the device is configured to use endNodeForwarding(2) then it will obtain addresses for dialin users in the LAN network range, and will defend those addresses. Packets to and from dialin clients will be forwarded. Technically the device may be configured as endNodeForwarding(2) when tATRoutingMode is any of: conformingRouter(1), seedRouter(2), or endNode(3). other(3) is provided in the event a value is returned which does not match any of the other enumerated values. It is not expected that this will happen. Enumeration: 'other': 3, 'endNodeForwarding': 2, 'routing': 1.
 tRTMPEntryTotal 1.3.6.1.4.1.166.4.2.20 integer read-only
The number of network (range) entries in the device's RTMP Table. This value is not cleared by the tRTMPZeroCounters switch.
 tZoneTotal 1.3.6.1.4.1.166.4.2.21 integer read-only
The number of AppleTalk zones for which the device has learned one or more associated nets or net ranges. This value is not cleared by the tZIPZeroCounters switch.