SHE-MELT-MIB: View SNMP OID List / Download MIB

VENDOR: SIEMENS


 Home MIB: SHE-MELT-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 sheMelt 1.3.6.1.4.1.231.7.1.2.1.24
Definition of MELT (metallic line testing) feature control commands and results. New supported with R3.7M.
       sheMeltTestRequestObjects 1.3.6.1.4.1.231.7.1.2.1.24.1
           sheMeltTestParameter 1.3.6.1.4.1.231.7.1.2.1.24.1.1
               sheMeltTestParameterFreq1 1.3.6.1.4.1.231.7.1.2.1.24.1.1.1 shemelttestfrequencytype read-only
This parameter contains the used frequency 1 for MELT impedance/admittance test.
           sheMeltTestRequestStateTable 1.3.6.1.4.1.231.7.1.2.1.24.1.2 no-access
Each entry in this table contains the testing status of each IfIndex. Only indeces of MELT feature supporting interfaces are listed in this table!
               sheMeltTestRequestStateEntry 1.3.6.1.4.1.231.7.1.2.1.24.1.2.1 no-access
An entry in sheMeltTestRequestIfTable.
                   sheMeltTestRequestIfState 1.3.6.1.4.1.231.7.1.2.1.24.1.2.1.1 shemelttestrequestifstatetype read-only
The MELT status of this interface. Only one port of one IU could be under test at time. Ports on different IU's could be under test at the same time. Check the corresponding sheMeltTestRequestIuState for this precondition. NOTE: Wetting current injection will be autonomously interrupted, if MELT or testTone insertion is started (WC configuration himself via sheXdslMib or sheShdslMib) for this interface as long as the test is running. Forgetting to stop test tone insertion will inhibit wetting current!
                   sheMeltTestRequestIuState 1.3.6.1.4.1.231.7.1.2.1.24.1.2.1.2 shemelttestrequestiustatetype read-only
The MELT status of IU where this interface is located on. Every port must know whether this IU is under melt test already or not, in order to decide if the melt test request on this port can be accepted. Only one port of one IU could be under test at time. Ports on different IU's could be under test at the same time.
                   sheMeltTestRequestTestToneIndex 1.3.6.1.4.1.231.7.1.2.1.24.1.2.1.3 shemelttesttoneindextype read-only
This parameter points on a valid entry of sheMeltTestToneTable. These configuration is needed for test tone insertion on this line. One default profile with index 1 will always exist and is assigned per default to each line!
           sheMeltTestRequestStateControl 1.3.6.1.4.1.231.7.1.2.1.24.1.3
               sheMeltTestRequestControlReq 1.3.6.1.4.1.231.7.1.2.1.24.1.3.1 shemeltcontrolreqtype read-write
setMeltTestParameters (1): sheMeltTestRequestControlParameterFreq1 startMeltTest (2): sheMeltTestRequestControlIndex stopMeltTest (3): sheMeltTestRequestControlIndex activateTestTone (4): sheMeltTestRequestControlIndex deactivateTestTone (5): sheMeltTestRequestControlIndex setMeltTestRequestTestToneIndex (8): sheMeltTestRequestControlIndex sheMeltTestRequestControlTestToneIndex
               sheMeltTestRequestControlIndex 1.3.6.1.4.1.231.7.1.2.1.24.1.3.2 interfaceindex read-write
The interface index of the DSL central PPTP which should be configured.
               sheMeltTestRequestControlStatus 1.3.6.1.4.1.231.7.1.2.1.24.1.3.3 shecontrolstatustype read-only
The status of a control request.
               sheMeltTestRequestControlTimer 1.3.6.1.4.1.231.7.1.2.1.24.1.3.4 unsigned32 read-only
The maximum wait time for the manager for a long running user command.
               sheMeltTestRequestControlReqResult 1.3.6.1.4.1.231.7.1.2.1.24.1.3.5 shemeltcontrolreqresulttype read-only
The result of the last user command.
               sheMeltTestRequestControlReqTimeStamp 1.3.6.1.4.1.231.7.1.2.1.24.1.3.6 unsigned32 read-only
The time stamp of the last command (end of command).
               sheMeltTestRequestControlTestToneIndex 1.3.6.1.4.1.231.7.1.2.1.24.1.3.7 shemelttesttoneindextype read-write
look at table
               sheMeltTestRequestControlParameterFreq1 1.3.6.1.4.1.231.7.1.2.1.24.1.3.8 shemelttestfrequencytype read-write
Look at basic parameter group.
       sheMeltTestToneObjects 1.3.6.1.4.1.231.7.1.2.1.24.2
           sheMeltTestToneTable 1.3.6.1.4.1.231.7.1.2.1.24.2.1 no-access
Each entry in this table contains a set of parameters for test tone generation. These entries could be assigned to each interface. One default entry exist which could NOT be modified or deleted!
               sheMeltTestToneEntry 1.3.6.1.4.1.231.7.1.2.1.24.2.1.1 no-access
An entry in sheMeltTestToneTable.
                   sheMeltTestToneIndex 1.3.6.1.4.1.231.7.1.2.1.24.2.1.1.1 shemelttesttoneindextype read-only
This parameter is index of sheMeltTestToneTable. This configuration is needed for test tone insertion on the line. One default profile with index 1 will always exist and is assigned per default to each line!
                   sheMeltTestToneFreq1 1.3.6.1.4.1.231.7.1.2.1.24.2.1.1.2 shemelttesttonefrequencytype read-only
The test tone frequency 1 of test tone set.
                   sheMeltTestToneFreq2 1.3.6.1.4.1.231.7.1.2.1.24.2.1.1.3 shemelttesttonefrequencytype read-only
The test tone frequency 2 of test tone set.
                   sheMeltTestToneLevel 1.3.6.1.4.1.231.7.1.2.1.24.2.1.1.4 shemelttestsignalleveltype read-only
The test tone level of test tone set.
           sheMeltTestToneControl 1.3.6.1.4.1.231.7.1.2.1.24.2.2
               sheMeltTestToneControlReq 1.3.6.1.4.1.231.7.1.2.1.24.2.2.1 shemeltcontrolreqtype read-write
createMeltTestToneEntry (10): (index will autonomously generated by NE) sheMeltTestToneControlFreq1 sheMeltTestToneControlFreq2 sheMeltTestToneControlLevel modifyMeltTestToneEntry (11): sheMeltTestToneControlIndex sheMeltTestToneControlFreq1 sheMeltTestToneControlFreq2 sheMeltTestToneControlLevel deleteMeltTestToneEntry (12): sheMeltTestToneControlIndex
               sheMeltTestToneControlIndex 1.3.6.1.4.1.231.7.1.2.1.24.2.2.2 shemelttesttoneindextype read-write
The table index of the TestToneTable which should be configured. Default tone-set 1 could not be modified or deleted!
               sheMeltTestToneControlStatus 1.3.6.1.4.1.231.7.1.2.1.24.2.2.3 shecontrolstatustype read-only
The status of a control request.
               sheMeltTestToneControlTimer 1.3.6.1.4.1.231.7.1.2.1.24.2.2.4 unsigned32 read-only
The maximum wait time for the manager for a long running user command.
               sheMeltTestToneControlReqResult 1.3.6.1.4.1.231.7.1.2.1.24.2.2.5 shemeltcontrolreqresulttype read-only
The result of the last user command.
               sheMeltTestToneControlReqTimeStamp 1.3.6.1.4.1.231.7.1.2.1.24.2.2.6 unsigned32 read-only
The time stamp of the last command (end of command).
               sheMeltTestToneControlFreq1 1.3.6.1.4.1.231.7.1.2.1.24.2.2.7 shemelttesttonefrequencytype read-write
look at table
               sheMeltTestToneControlFreq2 1.3.6.1.4.1.231.7.1.2.1.24.2.2.8 shemelttesttonefrequencytype read-write
look at table
               sheMeltTestToneControlLevel 1.3.6.1.4.1.231.7.1.2.1.24.2.2.9 shemelttestsignalleveltype read-write
look at table
       sheMeltTestResultObjects 1.3.6.1.4.1.231.7.1.2.1.24.3
           sheMeltTestResultTable 1.3.6.1.4.1.231.7.1.2.1.24.3.1 no-access
Each entry in this table contains the testing results of each IfIndex. Only indeces of MELT feature supporting interfaces are listed in this table!
               sheMeltTestResultEntry 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1 no-access
An entry in sheMeltTestResultTable.
                   sheMeltTestResultState 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.1 shemelttestresultstatetype read-only
The MELT result status of this interface.
                   sheMeltTestResultTimeStamp 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.2 unsigned32 read-only
Timestamp of last executed MELT.
                   sheMeltTestResultCapacityAB 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.3 shemelttestresultcapacitytype read-only
The MELT result for capacity a-wire - b-wire (ring - tip).
                   sheMeltTestResultCapacityABValid 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.4 shemelttestresultvalidtype read-only
The valid information for capacitytest a-wire - b-wire, if sheMeltTestResultState = testSucceeded.
                   sheMeltTestResultCapacityAE 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.5 shemelttestresultcapacitytype read-only
The MELT result for capacity a-wire - E (ring - earth).
                   sheMeltTestResultCapacityAEValid 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.6 shemelttestresultvalidtype read-only
The valid information for capacitytest a-wire - earth, if sheMeltTestResultState = testSucceeded.
                   sheMeltTestResultCapacityBE 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.7 shemelttestresultcapacitytype read-only
The MELT result for capacity b-wire - E (tip - earth).
                   sheMeltTestResultCapacityBEValid 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.8 shemelttestresultvalidtype read-only
The valid information for capacitytest b-wire - earth, if sheMeltTestResultState = testSucceeded.
                   sheMeltTestResultResistanceAB 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.9 shemelttestresultresistancetype read-only
The MELT result for resistance a-wire - b-wire (ring - tip). Note: The NMS should be able to show the values also in kOhms or MOhms for better readability.
                   sheMeltTestResultResistanceABValid 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.10 shemelttestresultvalidtype read-only
The valid information for resistancetest a-wire - b-wire, if sheMeltTestResultState = testSucceeded.
                   sheMeltTestResultResistanceBA 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.11 shemelttestresultresistancetype read-only
The MELT result for resistance b-wire - a-wire (tip - ring). Note: The NMS should be able to show the values also in kOhms or MOhms for better readability.
                   sheMeltTestResultResistanceBAValid 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.12 shemelttestresultvalidtype read-only
The valid information for resistancetest b-wire - a-wire, if sheMeltTestResultState = testSucceeded.
                   sheMeltTestResultResistanceAE 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.13 shemelttestresultresistancetype read-only
The MELT result for resistance a-wire - E (ring - earth). Note: The NMS should be able to show the values also in kOhms or MOhms for better readability.
                   sheMeltTestResultResistanceAEValid 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.14 shemelttestresultvalidtype read-only
The valid information for resistancetest a-wire - earth, if sheMeltTestResultState = testSucceeded.
                   sheMeltTestResultResistanceBE 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.15 shemelttestresultresistancetype read-only
The MELT result for resistance b-wire - E (tip - earth). Note: The NMS should be able to show the values also in kOhms or MOhms for better readability.
                   sheMeltTestResultResistanceBEValid 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.16 shemelttestresultvalidtype read-only
The valid information for resistancetest b-wire - earth, if sheMeltTestResultState = testSucceeded.
                   sheMeltTestResultForeignVoltageDcAB 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.17 shemelttestresultdcvoltagetype read-only
The MELT result for foreign voltage DC a-wire - b-wire (ring - tip).
                   sheMeltTestResultForeignVoltageDcABValid 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.18 shemelttestresultvalidtype read-only
The valid information for foreignDcVoltagetest a-wire - b-wire, if sheMeltTestResultState = testSucceeded.
                   sheMeltTestResultForeignVoltageDcAE 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.19 shemelttestresultdcvoltagetype read-only
The MELT result for foreign voltage DC a-wire - E (ring - earth).
                   sheMeltTestResultForeignVoltageDcAEValid 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.20 shemelttestresultvalidtype read-only
The valid information for foreignDcVoltagetest a-wire - earth, if sheMeltTestResultState = testSucceeded.
                   sheMeltTestResultForeignVoltageDcBE 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.21 shemelttestresultdcvoltagetype read-only
The MELT result for foreign voltage DC b-wire - E (tip - earth).
                   sheMeltTestResultForeignVoltageDcBEValid 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.22 shemelttestresultvalidtype read-only
The valid information for foreignDcVoltagetest b-wire - earth, if sheMeltTestResultState = testSucceeded.
                   sheMeltTestResultForeignVoltageAcAB 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.23 shemelttestresultacvoltagetype read-only
The MELT result for foreign voltage AC a-wire - b-wire (ring - tip).
                   sheMeltTestResultForeignVoltageAcABValid 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.24 shemelttestresultvalidtype read-only
The valid information for foreignAcVoltage test a-wire - b-wire, if sheMeltTestResultState = testSucceeded.
                   sheMeltTestResultForeignVoltageAcAE 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.25 shemelttestresultacvoltagetype read-only
The MELT result for foreign voltage AC a-wire - E (ring - earth).
                   sheMeltTestResultForeignVoltageAcAEValid 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.26 shemelttestresultvalidtype read-only
The valid information for foreignAcVoltagetest a-wire - earth, if sheMeltTestResultState = testSucceeded.
                   sheMeltTestResultForeignVoltageAcBE 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.27 shemelttestresultacvoltagetype read-only
The MELT result for foreign voltage AC b-wire - E (tip - earth).
                   sheMeltTestResultForeignVoltageAcBEValid 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.28 shemelttestresultvalidtype read-only
The valid information for foreignAcVoltagetest b-wire - earth, if sheMeltTestResultState = testSucceeded.
                   sheMeltTestResultForeignVoltageAcFrequencyAB 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.29 shemelttestresultacvoltagefrequencytype read-only
The MELT result for foreign voltage AC frequency a-wire - b-wire (ring - tip).
                   sheMeltTestResultForeignVoltageAcFrequencyABValid 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.30 shemelttestresultvalidtype read-only
The valid information for foreignAcVoltageFrequency test a-wire - b-wire, if sheMeltTestResultState = testSucceeded.
                   sheMeltTestResultForeignVoltageAcFrequencyAE 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.31 shemelttestresultacvoltagefrequencytype read-only
The MELT result for foreign voltage AC frequency a-wire - earth (ring - earth).
                   sheMeltTestResultForeignVoltageAcFrequencyAEValid 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.32 shemelttestresultvalidtype read-only
The valid information for foreignAcVoltageFrequency test a-wire - earth, if sheMeltTestResultState = testSucceeded.
                   sheMeltTestResultForeignVoltageAcFrequencyBE 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.33 shemelttestresultacvoltagefrequencytype read-only
The MELT result for foreign voltage AC frequency b-wire - earth (tip - earth).
                   sheMeltTestResultForeignVoltageAcFrequencyBEValid 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.34 shemelttestresultvalidtype read-only
The valid information for foreignAcVoltageFrequency test b-wire - earth, if sheMeltTestResultState = testSucceeded.
                   sheMeltTestResultForeignCurrentAB 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.35 shemelttestresultforeigncurrenttype read-only
The MELT result for foreign current test a-wire - b-wire (ring - tip).
                   sheMeltTestResultForeignCurrentABValid 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.36 shemelttestresultvalidtype read-only
The valid information for foreignCurrenttest a-wire - b-wire, if sheMeltTestResultState = testSucceeded.
                   sheMeltTestResultForeignCurrentAE 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.37 shemelttestresultforeigncurrenttype read-only
The MELT result for foreign current test a-wire - E (ring - earth).
                   sheMeltTestResultForeignCurrentAEValid 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.38 shemelttestresultvalidtype read-only
The valid information for foreignCurrenttest a-wire - earth, if sheMeltTestResultState = testSucceeded.
                   sheMeltTestResultForeignCurrentBE 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.39 shemelttestresultforeigncurrenttype read-only
The MELT result for foreign current test b-wire - E (tip - earth).
                   sheMeltTestResultForeignCurrentBEValid 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.40 shemelttestresultvalidtype read-only
The valid information for foreignCurrenttest b-wire - earth, if sheMeltTestResultState = testSucceeded.
                   sheMeltTestResultConductanceAB 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.41 shemelttestresultconductancetype read-only
The MELT result for conductance test a-wire - b-wire (ring - tip).
                   sheMeltTestResultConductanceABValid 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.42 shemelttestresultvalidtype read-only
The valid information for conductancetest a-wire - b-wire, if sheMeltTestResultState = testSucceeded.
                   sheMeltTestResultConductanceAE 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.43 shemelttestresultconductancetype read-only
The MELT result for conductance test a-wire - earth (ring - earth).
                   sheMeltTestResultConductanceAEValid 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.44 shemelttestresultvalidtype read-only
The valid information for conductancetest a-wire - earth, if sheMeltTestResultState = testSucceeded.
                   sheMeltTestResultConductanceBE 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.45 shemelttestresultconductancetype read-only
The MELT result for conductance test b-wire - earth (tip - earth).
                   sheMeltTestResultConductanceBEValid 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.46 shemelttestresultvalidtype read-only
The valid information for conductancetest b-wire - earth, if sheMeltTestResultState = testSucceeded.
                   sheMeltTestResultSusceptanceAB 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.47 shemelttestresultconductancetype read-only
The MELT result for susceptance test a-wire - b-wire (ring - tip).
                   sheMeltTestResultSusceptanceABValid 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.48 shemelttestresultvalidtype read-only
The valid information for susceptancetest a-wire - b-wire, if sheMeltTestResultState = testSucceeded.
                   sheMeltTestResultSusceptanceAE 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.49 shemelttestresultconductancetype read-only
The MELT result for susceptance test a-wire - earth (ring - earth).
                   sheMeltTestResultSusceptanceAEValid 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.50 shemelttestresultvalidtype read-only
The valid information for susceptancetest a-wire - earth, if sheMeltTestResultState = testSucceeded.
                   sheMeltTestResultSusceptanceBE 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.51 shemelttestresultconductancetype read-only
The MELT result for susceptance test b-wire - earth (tip - earth).
                   sheMeltTestResultSusceptanceBEValid 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.52 shemelttestresultvalidtype read-only
The valid information for susceptancetest b-wire - earth, if sheMeltTestResultState = testSucceeded.
                   sheMeltTestResultCheckPPA 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.53 shemelttestresultcheckppatype read-only
The MELT result for PPA test.
                   sheMeltTestResultCheckSplitter 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.54 shemelttestresultchecktype read-only
The MELT result for Splitter test.
                   sheMeltTestResultCheckIAD 1.3.6.1.4.1.231.7.1.2.1.24.3.1.1.55 shemelttestresultchecktype read-only
The MELT result for IAD test.
       sheMeltNotifications 1.3.6.1.4.1.231.7.1.2.1.24.10
             sheMeltTestRequestParametersModified 1.3.6.1.4.1.231.7.1.2.1.24.10.1
The MELT testparameters are modified.
             sheMeltTestRequestStateModified 1.3.6.1.4.1.231.7.1.2.1.24.10.2
The MELT state of an interface was modified by command or by NE.
             sheMeltTestRequestIfTestToneIndexModified 1.3.6.1.4.1.231.7.1.2.1.24.10.3
The used test tone set of an interface (assignment interface - test tone index) was modified.
             sheMeltTestToneEntryCreated 1.3.6.1.4.1.231.7.1.2.1.24.10.4
Configuration trap for new created MELT testTone set.
             sheMeltTestToneEntryModified 1.3.6.1.4.1.231.7.1.2.1.24.10.5
Configuration trap for modified MELT testTone set.
             sheMeltTestToneEntryDeleted 1.3.6.1.4.1.231.7.1.2.1.24.10.6
Configuration trap for delete a MELT testTone set.
       sheMeltConformance 1.3.6.1.4.1.231.7.1.2.1.24.100
               sheMeltCompliances 1.3.6.1.4.1.231.7.1.2.1.24.100.1
                   sheMeltMibCompliance 1.3.6.1.4.1.231.7.1.2.1.24.100.1.1
Description.
               sheMeltGroups 1.3.6.1.4.1.231.7.1.2.1.24.100.2
                   sheMeltGroup 1.3.6.1.4.1.231.7.1.2.1.24.100.2.1
                   sheMeltControlGroup 1.3.6.1.4.1.231.7.1.2.1.24.100.2.2
Description.
                   sheMeltNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.24.100.2.3