SHE-ADSL-MIB: View SNMP OID List / Download MIB

VENDOR: SIEMENS


 Home MIB: SHE-ADSL-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 sheAdslMib 1.3.6.1.4.1.231.7.1.2.1.6
The MIB module to describe ADSL product. The MIB module that provides objects that are proprietary and extension to ADSL- LINE-MIB.The MIB includes the following Tables. 1.) adslLineTable 2.) adslAtucPhysTable 3.) adslAturPhysTable 4.) adslAtucChanTable 5.) adslAturChanTable 6.) adslAtucPerfDataTable 7.) adslAtucIntervalTable 8.) adslAtucChanPerfDataTable 9.) adslAturChanPerfDataTable 10.) adslAtucChanIntervalTable 11.) adslAturChanIntervalTable 12.) adslLineConfProfileTable 13.) adslLineConfExtnProfileTable 13.) adslLineAlarmConfProfileTable 14.) adslVccTpTable 15.) adslRfiMaskTable
     sheAdslMibObjects 1.3.6.1.4.1.231.7.1.2.1.6.1
         sheAdslLineMIB 1.3.6.1.4.1.231.7.1.2.1.6.1.1
             sheDslSystemParamGroup 1.3.6.1.4.1.231.7.1.2.1.6.1.1.1
                 sheDslSystemDslType 1.3.6.1.4.1.231.7.1.2.1.6.1.1.1.1 shedslsystemtype read-only
This object identifies the firmware to be downloaded. adsl(1), sdsl(2), shdsl(3)
                 sheDslSystemLineCodingType 1.3.6.1.4.1.231.7.1.2.1.6.1.1.1.2 shedslsystemlinecodingtype read-only
This object indicates ADSL line code type. other(1), dmt(2), cap(3), qam(4)
                 sheDslSystemLineTxCfg 1.3.6.1.4.1.231.7.1.2.1.6.1.1.1.3 shedslsystemtxcfgtype read-only
This object indicates transmission capabilities with which the DSL system is configured. unused(0), etsi(1), q9921PotsNonOverlapped(2), q9921PotsOverlapped(3), q9921IsdnNonOverlapped(4), q9921IsdnOverlapped(5), q9921TcmIsdnNonOverlapped(6), q9921TcmIsdnOverlapped(7), q9922PotsNonOverlapped(8), q9922PotsOverlapped(9), q9922TcmIsdnNonOverlapped(10), q9922TcmIsdnOverlapped(11), q9922TcmIsdnSymmetric(12), adslPlusPotsNonOverlapped(13)
             sheDslSystemParamControl 1.3.6.1.4.1.231.7.1.2.1.6.1.1.2
                 sheDslSystemParamControlRequest 1.3.6.1.4.1.231.7.1.2.1.6.1.1.2.1 sheadslcontrolrequesttype read-write
setDslSystemLineTxCfg: sheDslSystemParamControlLineTxCfg
                 sheDslSystemParamControlStatus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.2.2 shecontrolstatustype read-only
The status of a user command.
                 sheDslSystemParamControlTimer 1.3.6.1.4.1.231.7.1.2.1.6.1.1.2.3 gauge32 read-only
The maximum wait time for the manager for a long running user command.
                 sheDslSystemParamControlReqResult 1.3.6.1.4.1.231.7.1.2.1.6.1.1.2.4 sheadslcontrolrequestresulttype read-only
The result of the last user command.
                 sheDslSystemParamControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.6.1.1.2.5 unsigned32 read-only
The time stamp of the last command (end of command).
                 sheDslSystemParamControlLineTxCfg 1.3.6.1.4.1.231.7.1.2.1.6.1.1.2.6 shedslsystemtxcfgtype read-write
This object indicates transmission capabilities with which the DSL system is configured.
             sheAdslSystemCapabilityGroup 1.3.6.1.4.1.231.7.1.2.1.6.1.1.3
                 sheAdslCapabilityLineTxCap 1.3.6.1.4.1.231.7.1.2.1.6.1.1.3.1 shedslsystemtxcfgtype read-only
This bitmap specifies all transmission modes, which the ATU-C is capable of supporting. Right now support for Annex A (q9921PotsNonOverlapped(2) and q9921PotsOverlapped(3)) is present. This value depends on the DSL PHY firmware present on Columbia MND unused(0), etsi(1), q9921PotsNonOverlapped(2), q9921PotsOverlapped(3), q9921IsdnNonOverlapped(4), q9921IsdnOverlapped(5), q9921TcmIsdnNonOverlapped(6), q9921TcmIsdnOverlapped(7), q9922PotsNonOverlapped(8), q9922PotsOverlapped(9), q9922TcmIsdnNonOverlapped(10), q9922TcmIsdnOverlapped(11), q9922TcmIsdnSymmetric(12), adslPlusPotsNonOverlapped(13)
             sheAdslLineConfProfileTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4 no-access
This table contains information on the ADSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the ADSL line.
                 sheAdslLineConfProfileEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1 no-access
Each entry consists of a list of parameters that represents the configuration of an ADSL modem. `Dynamic' profiles are implemented. A default profile will always exist. This profile's name will be set to `DEFVAL' and its parameters will be set to vendor specific values, unless otherwise specified in this document.
                     sheAdslLineConfProfileIndex 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.1 integer32 read-only
The table index.
                     sheAdslLineConfProfileName 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.2 snmpadminstring read-only
This object is used by the line configuration table in order to identify a row of this table. Dynamic profiles are implemented. The profile name is user specified. Also, the system will always provide a default profile whose name is `DEFVAL' for Annex A and DEFVAL_ISDN fpr Annex B card's (both Adsl2+). Special characters are not allowed, like: space : ?
                     sheAdslLineConfProfileAtucConfRateMode 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.3 sheadsllineconfratemodetype read-only
Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information. fixed(1), adaptAtStartup(2), adaptAtRuntime(3)
                     sheAdslLineConfProfileAtucConfRateChanRatio 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.4 integer read-only
Configured allocation ratio of excess transmit bandwidth between fast and interleaved channels. Only applies when two channel mode and rate adaptive DSL are supported. A ratio of 20% means, that 20 % of the available data rate (in access of the minimum rate summend over all bearer channels) will be assigned to the fast channel and 80% to the interleaved channel. Only valid if sheAdslLineConfExtnProfileLineType is set to dualLatency mode.
                     sheAdslLineConfProfileAtucConfTargetSnrMgn 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.5 integer read-only
Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.
                     sheAdslLineConfProfileAtucConfMaxSnrMgn 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.6 integer read-only
Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation.
                     sheAdslLineConfProfileAtucConfMinSnrMgn 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.7 integer read-only
Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or shut down.
                     sheAdslLineConfProfileAtucConfDownshiftSnrMgn 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.8 integer read-only
Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that adaptAtRuntime mode is not present, the value will be 'don't care'.
                     sheAdslLineConfProfileAtucConfUpshiftSnrMgn 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.9 integer read-only
Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that adaptAtRuntime mode is not present, the value will be 'don't care'.
                     sheAdslLineConfProfileAtucConfMinUpshiftTime 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.10 integer read-only
Minimum time that the current margin is above UpshiftSnrMgn before an upshift occurs. In the case that adaptAtRuntime mode is not present, the value will be 'don't care'.
                     sheAdslLineConfProfileAtucConfMinDownshiftTime 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.11 integer read-only
Minimum time that the current margin is below DownshiftSnrMgn before a downshift occurs. In the case that adaptAtRuntime mode is not present, the value will be 'don't care'.
                     sheAdslLineConfProfileAtucChanConfFastMinTxRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.12 unsigned32 read-only
Configured Minimum Transmit rate for `Fast' channels, in kbps. See adslAtucConfRateChanRatio for information regarding RADSL mode and ATUR transmit rate for ATUC receive rates. Only multiples of 32 will be configured.
                     sheAdslLineConfProfileAtucChanConfInterleaveMinTxRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.13 unsigned32 read-only
Configured Minimum Transmit rate for `Interleave' channels, in kbps. See adslAtucConfRateChanRatio for information regarding RADSL mode and see ATUR transmit rate for receive rates. Only multiples of 32 will be configured.
                     sheAdslLineConfProfileAtucChanConfFastMaxTxRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.14 unsigned32 read-only
Configured Maximum Transmit rate for `Fast' channels, in kbps. See adslAtucConfRateChanRatio for information regarding RADSL mode and see ATUR transmit rate for ATUC receive rates. Only multiples of 32 will be configured.
                     sheAdslLineConfProfileAtucChanConfInterleaveMaxTxRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.15 unsigned32 read-only
Configured Maximum Transmit rate for `Interleave' channels, in kbps. See adslAtucConfRateChanRatio for information regarding RADSL mode and ATUR transmit rate for ATUC receive rates. Only multiples of 32 will be configured.
                     sheAdslLineConfProfileAtucChanConfMaxInterleaveDelay 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.16 integer read-only
Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency.
                     sheAdslLineConfProfileAturConfRateMode 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.17 sheadsllineconfratemodetype read-only
Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information. fixed(1), adaptAtStartup(2), adaptAtRuntime(3)
                     sheAdslLineConfProfileAturConfRateChanRatio 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.18 integer read-only
Configured allocation ratio of excess transmit bandwidth between fast and interleaved channels. Only applies when two channel mode and rate adaptive DSL are supported. A ratio of 20% means, that 20 % of the available data rate (in access of the minimum rate summend over all bearer channels) will be assigned to the fast channel and 80% to the interleaved channel. Only valid if sheAdslLineConfExtnProfileLineType is set to dualLatency mode.
                     sheAdslLineConfProfileAturConfTargetSnrMgn 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.19 integer read-only
Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.
                     sheAdslLineConfProfileAturConfMaxSnrMgn 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.20 integer read-only
Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation.
                     sheAdslLineConfProfileAturConfMinSnrMgn 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.21 integer read-only
Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or shut down.
                     sheAdslLineConfProfileAturConfDownshiftSnrMgn 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.22 integer read-only
Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that adaptAtRuntime mode is not present, the value will be 'don't care'.
                     sheAdslLineConfProfileAturConfUpshiftSnrMgn 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.23 integer read-only
Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that adaptAtRuntime mode is not present, the value will be 'don't care'.
                     sheAdslLineConfProfileAturConfMinUpshiftTime 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.24 integer read-only
Minimum time that the current margin is above UpshiftSnrMgn before an upshift occurs. In the case that adaptAtRuntime mode is not present, the value will be 'don't care'.
                     sheAdslLineConfProfileAturConfMinDownshiftTime 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.25 integer read-only
Minimum time that the current margin is below DownshiftSnrMgn before a downshift occurs. In the case that adaptAtRuntime mode is not present, the value will be 'don't care'.
                     sheAdslLineConfProfileAturChanConfFastMinTxRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.26 unsigned32 read-only
Configured Minimum Transmit rate for `Fast' channels, in kbps. See adslAturConfRateChanRatio for information regarding RADSL mode and ATUC transmit rate for ATUR receive rates. Only multiples of 32 will be configured.
                     sheAdslLineConfProfileAturChanConfInterleaveMinTxRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.27 unsigned32 read-only
Configured Minimum Transmit rate for `Interleave' channels, in kbps. See adslAturConfRateChanRatio for information regarding RADSL mode and ATUC transmit rate for ATUR receive rates. Only multiples of 32 will be configured.
                     sheAdslLineConfProfileAturChanConfFastMaxTxRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.28 unsigned32 read-only
Configured Maximum Transmit rate for `Fast' channels, in kbps. See adslAturConfRateChanRatio for information regarding RADSL mode and ATUC transmit rate for ATUR receive rates. Only multiples of 32 will be configured.
                     sheAdslLineConfProfileAturChanConfInterleaveMaxTxRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.29 unsigned32 read-only
Configured Maximum Transmit rate for `Interleave' channels, in kbps. See adslAturConfRateChanRatio for information regarding RADSL mode and see ATUC transmit rate for ATUR receive rates. Only multiples of 32 will be configured.
                     sheAdslLineConfProfileAturChanConfMaxInterleaveDelay 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.30 integer read-only
Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency.
                     sheAdslLineConfProfileTrellis 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.31 sheadsllinetrellismodetype read-only
Indicates if Trelliscoding is enabled or not. If TrellisCoding is used is indicated in sheAdslLineTable and depence also on the Atur-Capabilities. The NE will not accept setting trellisOff. It is automatically controlled by firmware and will be switched off if ATU-R will not support this.
                     sheAdslLineConfProfileAtucConfPwrMgmtL0Time 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.32 integer read-only
This parameter represents the minimum time (in seconds) between an exit from the L2 state and the next entry into the L2 state. It ranges from 0 to 255 seconds. Only valid for Adsl2 and Adsl2Plus.
                     sheAdslLineConfProfileAtucConfPwrMgmtL2Time 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.33 integer read-only
This parameter represents the minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 State. It ranges from 0 to 255 seconds. Only valid for Adsl2 and Adsl2Plus.
                     sheAdslLineConfProfileAtucConfPwrMgmtL2ATPR 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.34 integer read-only
This parameter represents the maximum aggregate transmit power reduction (in dB) that can be performed through a single Power Trim in the L2 state. It ranges from 0 dB/10 to 310 dB/10. Only valid for Adsl2 and Adsl2Plus.
                     sheAdslLineConfProfileAtucConfPwrMgmtL2Rate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.35 integer read-only
This parameter specifies the minimum net data rate during the low power state (L2). The data rate is coded in bit/s, and can range from 0x1F40 (8000) bps to 0xFA000 (1024000) bps. Only valid for Adsl2 and Adsl2Plus.
                     sheAdslLineConfProfileAtucConfPwrMgmtMode 1.3.6.1.4.1.231.7.1.2.1.6.1.1.4.1.36 sheadslpwrmgmtmodetype read-only
Which ADSL Power Management state is enabled. Only valid for Adsl2 and Adsl2Plus.
             sheAdslLineConfProfileControl 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5
                 sheAdslLineConfProfileControlRequest 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.1 sheadslcontrolrequesttype read-write
The different Controltypes for profile creation could be used to select predefined values for the supported standard. createAdslLineConfProfile (Adsl2PlusAnnexA) createAdslLineConfProfileAnnexA createAdslLineConfProfileAnnexB createAdslLineConfProfileAdsl2PlusAnnexB createAdslLineConfProfileAdsl2AnnexI createAdslLineConfProfileAdsl2AnnexJ createAdslLineConfProfileAdsl2PlusAnnexI createAdslLineConfProfileAdsl2PlusAnnexJ createAdslLineConfProfileAdsl2AnnexM createAdslLineConfProfileAdsl2PlusAnnexM sheAdslLineConfProfileControlName ... modifyAdslLineConfProfile sheAdslLineConfProfileControlIndex sheAdslLineConfProfileControlName ... deleteAdslLineConfProfile sheAdslLineConfProfileControlIndex sheAdslLineConfProfileControlName New with R2.8: createAdslLineConfProfileAdsl2PlusDynamic sheAdslLineConfProfileControlName
                 sheAdslLineConfProfileControlIndex 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.2 integer32 read-write
Index of the configured table-entry. Needed for modify or delete.
                 sheAdslLineConfProfileControlStatus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.3 shecontrolstatustype read-only
The status of a user command.
                 sheAdslLineConfProfileControlTimer 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.4 gauge32 read-only
The maximum wait time for the manager for a long running user command.
                 sheAdslLineConfProfileControlReqResult 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.5 sheadslcontrolrequestresulttype read-only
The result of the last user command.
                 sheAdslLineConfProfileControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.6 unsigned32 read-only
The time stamp of the last command (end of command).
                 sheAdslLineConfProfileControlName 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.7 snmpadminstring read-write
Descriptional name.
                 sheAdslLineConfProfileControlAtucConfRateMode 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.8 sheadsllineconfratemodetype read-write
Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information.
                 sheAdslLineConfProfileControlAtucConfRateChanRatio 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.9 integer read-write
Configured allocation ratio of excess transmit bandwidth between fast and interleaved channels. Only applies when two channel mode and rate adaptive DSL are supported. A ratio of 20% means, that 20 % of the available data rate (in access of the minimum rate summend over all bearer channels) will be assigned to the fast channel and 80% to the interleaved channel. Only valid if sheAdslLineConfExtnProfileLineType is set to dualLatency mode.
                 sheAdslLineConfProfileControlAtucConfTargetSnrMgn 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.10 integer read-write
Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.
                 sheAdslLineConfProfileControlAtucConfMaxSnrMgn 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.11 integer read-write
Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation.
                 sheAdslLineConfProfileControlAtucConfMinSnrMgn 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.12 integer read-write
Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or shut down.
                 sheAdslLineConfProfileControlAtucConfDownshiftSnrMgn 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.13 integer read-write
Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that RADSL mode is not present, the value will be `0'.
                 sheAdslLineConfProfileControlAtucConfUpshiftSnrMgn 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.14 integer read-write
Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that RADSL is not present, the value will be `0'.
                 sheAdslLineConfProfileControlAtucConfMinUpshiftTime 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.15 integer read-write
Minimum time that the current margin is above UpshiftSnrMgn before an upshift occurs. In the case that RADSL is not present, the value will be `0'.
                 sheAdslLineConfProfileControlAtucConfMinDownshiftTime 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.16 integer read-write
Minimum time that the current margin is below DownshiftSnrMgn before a downshift occurs. In the case that RADSL mode is not present, the value will be `0'.
                 sheAdslLineConfProfileControlAtucChanConfFastMinTxRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.17 unsigned32 read-write
Configured Minimum Transmit rate for `Fast' channels, in kbps. See adslAtucConfRateChanRatio for information regarding RADSL mode and ATUR transmit rate for ATUC receive rates. Only multiples of 32 will be configured.
                 sheAdslLineConfProfileControlAtucChanConfInterleaveMinTxRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.18 unsigned32 read-write
Configured Minimum Transmit rate for `Interleave' channels, in kbps. See adslAtucConfRateChanRatio for information regarding RADSL mode and see ATUR transmit rate for receive rates. Only multiples of 32 will be configured.
                 sheAdslLineConfProfileControlAtucChanConfFastMaxTxRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.19 unsigned32 read-write
Configured Maximum Transmit rate for `Fast' channels, in kbps. See adslAtucConfRateChanRatio for information regarding RADSL mode and see ATUR transmit rate for ATUC receive rates. Only multiples of 32 will be configured.
                 sheAdslLineConfProfileControlAtucChanConfInterleaveMaxTxRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.20 unsigned32 read-write
Configured Maximum Transmit rate for `Interleave' channels, in kbps. See adslAtucConfRateChanRatio for information regarding RADSL mode and ATUR transmit rate for ATUC receive rates. Only multiples of 32 will be configured.
                 sheAdslLineConfProfileControlAtucChanConfMaxInterleaveDelay 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.21 integer read-write
Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency.
                 sheAdslLineConfProfileControlAturConfRateMode 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.22 sheadsllineconfratemodetype read-write
Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information.
                 sheAdslLineConfProfileControlAturConfRateChanRatio 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.23 integer read-write
Configured allocation ratio of excess transmit bandwidth between fast and interleaved channels. Only applies when two channel mode and rate adaptive DSL are supported. A ratio of 20% means, that 20 % of the available data rate (in access of the minimum rate summend over all bearer channels) will be assigned to the fast channel and 80% to the interleaved channel. Only valid if sheAdslLineConfExtnProfileLineType is set to dualLatency mode.
                 sheAdslLineConfProfileControlAturConfTargetSnrMgn 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.24 integer read-write
Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization.
                 sheAdslLineConfProfileControlAturConfMaxSnrMgn 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.25 integer read-write
Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operation.
                 sheAdslLineConfProfileControlAturConfMinSnrMgn 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.26 integer read-write
Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that is not possible the modem will attempt to re-initialize or shut down.
                 sheAdslLineConfProfileControlAturConfDownshiftSnrMgn 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.27 integer read-write
Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the case that RADSL mode is not present, the value will be `0'.
                 sheAdslLineConfProfileControlAturConfUpshiftSnrMgn 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.28 integer read-write
Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the case that RADSL is not present, the value will be `0'.
                 sheAdslLineConfProfileControlAturConfMinUpshiftTime 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.29 integer read-write
Minimum time that the current margin is above UpshiftSnrMgn before an upshift occurs. In the case that RADSL is not present, the value will be `0'.
                 sheAdslLineConfProfileControlAturConfMinDownshiftTime 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.30 integer read-write
Minimum time that the current margin is below DownshiftSnrMgn before a downshift occurs. In the case that RADSL mode is not present, the value will be `0'.
                 sheAdslLineConfProfileControlAturChanConfFastMinTxRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.31 unsigned32 read-write
Configured Minimum Transmit rate for `Fast' channels, in kbps. See adslAturConfRateChanRatio for information regarding RADSL mode and ATUC transmit rate for ATUR receive rates. Only multiples of 32 will be configured.
                 sheAdslLineConfProfileControlAturChanConfInterleaveMinTxRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.32 unsigned32 read-write
Configured Minimum Transmit rate for `Interleave' channels, in kbps. See adslAturConfRateChanRatio for information regarding RADSL mode and ATUC transmit rate for ATUR receive rates. Only multiples of 32 will be configured.
                 sheAdslLineConfProfileControlAturChanConfFastMaxTxRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.33 unsigned32 read-write
Configured Maximum Transmit rate for `Fast' channels, in kbps. See adslAturConfRateChanRatio for information regarding RADSL mode and ATUC transmit rate for ATUR receive rates. Only multiples of 32 will be configured.
                 sheAdslLineConfProfileControlAturChanConfInterleaveMaxTxRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.34 unsigned32 read-write
Configured Maximum Transmit rate for `Interleave' channels, in kbps. See adslAturConfRateChanRatio for information regarding RADSL mode and see ATUC transmit rate for ATUR receive rates. Only multiples of 32 will be configured.
                 sheAdslLineConfProfileControlAturChanConfMaxInterleaveDelay 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.35 integer read-write
Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency.
                 sheAdslLineConfProfileControlTrellis 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.36 sheadsllinetrellismodetype read-write
Indicates if Trelliscoding is enabled or not. If TrellisCoding is used is indicated in sheAdslLineTable and depence also on the Atur-Capabilities. Do not touch!
                 sheAdslLineConfProfileControlAtucConfPwrMgmtL0Time 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.37 integer read-write
This parameter represents the minimum time (in seconds) between an exit from the L2 state and the next entry into the L2 state. It ranges from 0 to 255 seconds. Only valid for Adsl2 and Adsl2Plus.
                 sheAdslLineConfProfileControlAtucConfPwrMgmtL2Time 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.38 integer read-write
This parameter represents the minimum time (in seconds) between an Entry into the L2 state and the first Power Trim in the L2 state and between two consecutive Power Trims in the L2 State. It ranges from 0 to 255 seconds. Only valid for Adsl2 and Adsl2Plus.
                 sheAdslLineConfProfileControlAtucConfPwrMgmtL2ATPR 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.39 integer read-write
This parameter represents the maximum aggregate transmit power reduction (in dB) that can be performed through a single Power Trim in the L2 state. It ranges from 0 dB/10 to 310 dB/10. Only valid for Adsl2 and Adsl2Plus.
                 sheAdslLineConfProfileControlAtucConfPwrMgmtL2Rate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.40 integer read-write
This parameter specifies the minimum net data rate during the low power state (L2). The data rate is coded in bit/s, and can range from 0x1F40 (8000) bps to 0xFA000 (1024000) bps. Only valid for Adsl2 and Adsl2Plus.
                 sheAdslLineConfProfileControlAtucConfPwrMgmtMode 1.3.6.1.4.1.231.7.1.2.1.6.1.1.5.41 sheadslpwrmgmtmodetype read-write
Which ADSL Power Management state is enabled. Only valid for Adsl2 and Adsl2Plus.
             sheAdslLineConfExtnProfileTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6 no-access
This table contains information on the ADSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the ADSL line.
                 sheAdslLineConfExtnProfileEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1 no-access
Each entry consists of a list of parameters that represents the configuration of an ADSL modem. The index is used from the sheAdslLineConfProfileTable.
                     sheAdslLineConfExtnProfileParametricTestInputFile 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.1 displaystring read-only
Indicates Name of the Input file from which to take the Mask Array Size, lower and upper mask Array. Null string means no file is specified. Functionality is not supported!
                     sheAdslLineConfExtnProfileRsIntCorrectionUp 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.2 sheadsllineconfrsintcorrectiontype read-only
Sets the correction time for the upstream-interleaved buffer. RS can also be disabled. The Default Value for ADSL+ is 3. value125us(3), value250us(4), value500us(5), value1ms(6), value2ms(7), value4ms(8), disable(15)
                     sheAdslLineConfExtnProfileLineType 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.3 sheadslconflinetype read-only
This parameter provisions the DSL physical entity at start-up by defining whether and how the line will be channelized, i.e. which channel type(s) are supported. Defined values are: fastOnly(2) -- only fast channel exists (singleLatency) interleavedOnly(3) -- only interleaved channel exists (singleLatency, default) fastAndInterleaved(5) -- both fast and interleaved channels (dualLatency) exist In case of dualLatency (mode 5), the parameter's sheAdslLineConfProfileAtucConfRateChanRatio and sheAdslLineConfProfileAturConfRateChanRatio configures the bandwith distribution. IMPORTANT NOTE: The configuration of dualLatency mode is only available for NE releases up R2.5!! The modification is only possible for profiles, which are NOT IN USE!
                     sheAdslLineConfExtnProfileTxEndBin 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.4 integer read-only
Highest bin number allowed for Tx signal. The Range & default for ADSL+ is 0x06 - 0x1ff respectively. NE will not accept any changes and use always default value! Ne will select the correct values depending on the configuration of the following values: - AnnexType - DmtConfMode - AdvertisedCapability New with R2.8: If the used annexType was set to 'dynamic', no values of Tx/Rx bins could be set here, because this will be done by the IU depending on the used HW and choosen standard. The profile configuration will be set to value 65535 (0xffff) which means 'autoSelect'.
                     sheAdslLineConfExtnProfileTxStartBin 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.5 integer read-only
Lowest bin number allowed for Tx signal.The Range for ADSL+ is 0x06 - 0x1ff. The Default for Annex B is 58 respectively. For AnnexA it is 32. NE will not accept any changes and use always default value! Ne will select the correct values depending on the configuration of the following values: - AnnexType - DmtConfMode - AdvertisedCapability New with R2.8: If the used annexType was set to 'dynamic', no values of Tx/Rx bins could be set here, because this will be done by the IU depending on the used HW and choosen standard. The profile configuration will be set to value 65535 (0xffff) which means 'autoSelect'.
                     sheAdslLineConfExtnProfileMaxBitsPerBin 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.6 integer read-only
Maximum Rx number of bits per bin. NE will not accept any changes and use always default value!
                     sheAdslLineConfExtnProfileRxStartBin 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.7 integer read-only
Lowest bin number allowed for Rx signal. Default value for AnnexA is 6 and 32 for AnnexB. NE will not accept any changes and use always default value! Ne will select the correct values depending on the configuration of the following values: - AnnexType - DmtConfMode - AdvertisedCapability New with R2.8: If the used annexType was set to 'dynamic', no values of Tx/Rx bins could be set here, because this will be done by the IU depending on the used HW and choosen standard. The profile configuration will be set to value 65535 (0xffff) which means 'autoSelect'.
                     sheAdslLineConfExtnProfileRxEndBin 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.8 integer read-only
Highest bin number allowed for Rx signal. Default Value for AnnexA is 31 and 57 for AnnexB. NE will not accept any changes and use always default value! Ne will select the correct values depending on the configuration of the following values: - AnnexType - DmtConfMode - AdvertisedCapability New with R2.8: If the used annexType was set to 'dynamic', no values of Tx/Rx bins could be set here, because this will be done by the IU depending on the used HW and choosen standard. The profile configuration will be set to value 65535 (0xffff) which means 'autoSelect'.
                     sheAdslLineConfExtnProfileRxBinAdjust 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.9 sheadsllineconfextnprofilerxbinadjusttype read-only
Employs Rx Start/End bin settings. NE will not accept any changes and use always default value!
                     sheAdslLineConfExtnProfileTriggerMode 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.10 sheadsllineconftriggermodetype read-only
Indicates the Type of event that triggers fast retrain. disable(0), locCrc(1), rmtCrc(2), snrInc(4), snrDec(8) NE will not accept any changes and use always default value!
                     sheAdslLineConfExtnProfileAdi2x 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.11 sheadsllineconfextnprofileadi2xtype read-only
For non standard compliant ADI CPE. NE will not accept any changes and use always default value!
                     sheAdslLineConfExtnProfileStandard 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.12 sheadsllineconfstandardtype read-only
Preferred standard compliance. Outcome is dependent upon standard support of the remote unit.GlobespanVirata High Speed ADSL DMT (ADSL+) applications only. t1413(0), gLite(1), gDmt(2), multiMode(4), adsl2(26), adsl2_plus(27), readsl2(28), adsl2_auto(29), adsl2_plus_auto(30), adsl2adsl2PlusOnly(31) New with R2.8: If the used annexType was set to 'dynamic', the standardTypes 't1413', 'gLite', 'gDmt' and 'readsl2' could NOT be used. 'adsl2_plus_auto' should be the prefered use in that case!
                     sheAdslLineConfExtnProfileInitiate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.13 sheadsllineconfinitiatetype read-only
Specifies which end initiates startup. It is also used to send a C-tone to the remote unit. waitPn(0), ctone(1), initiatePn(128) NE will not accept any changes and use always default value!
                     sheAdslLineConfExtnProfileTxPowerAttenuation 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.14 sheadsllineconfattenuationtype read-only
Specifies value of Tx power attenuation. value0(0)...value21(21)
                     sheAdslLineConfExtnProfileCodingGain 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.15 sheadsllineconfgaintype read-only
Sets the coding gain in dB increments. gain0(0), gain1(4096), gain2(8192), gain3(12288), gain4(16384), gain5(20480), gain6(24576), gain7(28672), auto(65280) NE will not accept any changes and use always default value!
                     sheAdslLineConfExtnProfileRsFastOvrhdDown 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.16 sheadsllineconfrsfastovrhdtype read-only
Sets the percentage overhead for the downstream-fast buffer. ovrHd50(1), ovrHd25(2), ovrHd12(3), ovrHd6(4), ovrHd3(5), ovrHd1(7), disable(15) NE will not accept any changes and use always default value!
                     sheAdslLineConfExtnProfileIntCorrectionDown 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.17 sheadsllineconfrsintcorrectiontype read-only
This parameter sets the correction time for the downstream interleaved buffer. RS can also be disabled. value125us(3), value250us(4), value500us(5), value1ms(6), value2ms(7), value4ms(8), disable(15)
                     sheAdslLineConfExtnProfileRsFastOvrhdUp 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.18 sheadsllineconfrsfastovrhdtype read-only
Sets the percentage overhead for the upstream-fast buffer. ovrHd50(1), ovrHd25(2), ovrHd12(3), ovrHd6(4), ovrHd3(5), ovrHd1(7), disable(15) NE will not accept any changes and use always default value!
                     sheAdslLineConfExtnProfileDrStby 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.19 sheadsllineconfenabletype read-only
Provides the ability to disable power to the line driver. disable(0), enable(1) NE will not accept any changes and use always default value!
                     sheAdslLineConfExtnProfileExpandedExchange 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.20 sheadsllineconfexpandedexchangetype read-only
This object is used to Enable/Disable EES. disable(0), enable(1) NE will not accept any changes and use always default value!
                     sheAdslLineConfExtnProfileEscapeFastRetrainEnable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.21 sheadsllineconfenabletype read-only
This object is used to Enable/ Disable escape to the fast retrain capability. disable(0), enable(1) NE will not accept any changes and use always default value!
                     sheAdslLineConfExtnProfileFastRetrainEnable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.22 sheadsllineconfenablespecial3type read-only
This object is used to Enable/ Disable the fast retrain capability. disable(32768), enable(0) NE will not accept any changes and use always default value!
                     sheAdslLineConfExtnProfileBitSwap 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.23 sheadsllineconfenablespecial2type read-only
This object is used to Enable/Disable bit swapping. enable(32768), disable(0)
                     sheAdslLineConfExtnProfileNtr 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.24 sheadsllineconfntrtype read-only
This object is used to Enable/ Disable NTR on a per chip basis.
                     sheAdslLineConfExtnProfileAnnexType 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.25 sheadsllineconfannextype read-only
This parameter is set as per annex compliance of the code release. GlobespanVirata High Speed ADSL DMT (ADSL+) applications only. annexA(0), annexB(1), highSpeed(2), annexAdsl2(5), annexI(10), annexJ(11), annexM(12) New with R2.8: dynamic(50) If the used annexType was set to 'dynamic', such a profile could be assigned to any type of supported ADSL IU. The IU will select the supported annex himself, depending on HW restrictions and line parameters. This selection made additional restrictions to the following parameters: - tx/rx start and end bin usage - profile Standard - profile AdvertisedCapabilities - profileLineDmtConfMode
                     sheAdslLineConfExtnProfileAlctlUsVer 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.26 sheadsllineconfextnprofilealctlusvertype read-only
This object is used for T1.413 demo purposes only. NE will not accept any changes and use always default value!
                     sheAdslLineConfExtnProfileUseCustomBin 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.27 sheadsllineconfenablespecial2type read-only
This object is used to Enable/ Disable user selection of bin-usage defined in sheAdslLineConfExtnProfileDnBinUsage. disable(0), enable(32768)
                     sheAdslLineConfExtnProfileDnBinUsage 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.28 octet string read-only
The parameter where a 1 in bit position indicates usage of corresponding bin, whereas a 0 disables usage of corresponding bin.
                     sheAdslLineConfExtnProfileMaxDCo 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.29 sheadsllineconfintdephttype read-only
This object is used to indicate Maximum interleaving depth supported by the customer's hardware. value64(0), value128(4096), value256(8192)
                     sheAdslLineConfExtnProfileFullRetrain 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.30 sheadsllineconfenablespecial3type read-only
This object is used to Indicate enable/disable of auto retrain capability. enable(0), disable(32768) NE will not accept any changes and use always default value!
                     sheAdslLineConfExtnProfileAdvertisedCapabilities 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.31 sheadsllineconfadvertisedcapabilitiestype read-only
Controls if the CO will attempt to startup using alternate standards if the CPE does not support ADSL+. New with R2.8: If the used annexType was set to 'dynamic', this parameter should be set to 'disabled' or 'adslPlus'. All other values will not work with the intended set of dynamic annexType selection by IU.
                     sheAdslLineConfExtnProfilePsdMaskType 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.32 sheadsllineconfpsdmasktype read-only
Selects the PSD mask option to be used.
                     sheAdslLineConfExtnProfileLineDmtConfMode 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.33 sheadsllineconflinedmtconfmodetype read-only
Selects if there is overlap or no overlap of bins. Overlapping is only supported by non ISDN profiles and will change the setting for TxStartBin accordingly!!. New with R2.8: If the used annexType was set to 'dynamic', this parameter should be set to 'fdmMode' only. Other values will not work with the intended set of dynamic annexType selection by IU.
                     sheAdslLineConfExtnProfileEraseProfiles 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.34 sheadsllineconfenablespecial2type read-only
Enables/Disables the ability to erase all fast retrain profiles at startup. disable(0), enable(32768)
                     sheAdslLineConfExtnProfileRsMemory 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.35 sheadsllineconfrsmemorytype read-only
Indicates whether customer's Hardware should use external RS RAM. Could not be configured and depends only on the used card type.
                     sheAdslLineConfExtnProfileParamHybridLossTestStart 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.36 integer read-only
Indicates Start bin for range of bins to be measured.
                     sheAdslLineConfExtnProfileParamHybridLossTestEnd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.37 integer read-only
Indicates End bin for range of bins to be measured.
                     sheAdslLineConfExtnProfileConfMinInp 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.38 sheadslconfmininptype read-only
New ADSL2+ parameter. The user configures the duration of impulse noise the system should withstand. This parameter configures the value for downstream direction.
                     sheAdslLineConfExtnProfileRfiBandMask 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.39 octet string read-only
BitMask for sheAdslRfiBandIndex. Configured RFI bands are used for this profile.
                     sheAdslLineConfExtnProfileUpstreamPsdMaskSelection 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.40 sheadsllineconfupstreampsdmaskselectiontype read-only
Selects the PSD mask option to be used. This parameter is used only for annexes J and M of ITU-T Recs. G.992-3 and G.992.5 Other profiles will ignore the configured value and use per default the value noSelection(0).
                     sheAdslLineConfExtnProfileMaxNomPsdDs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.41 integer read-only
The maximum nominal transmit PSD in the downstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. (physical values are -60 to -30 dBm/Hz).
                     sheAdslLineConfExtnProfileMaxNomAtpDs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.42 gauge32 read-only
The maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.1 dBm (physical values are 0 to 25.5 dBm).
                     sheAdslLineConfExtnProfilePsdMaskDs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.43 octet string read-only
The downstream PSD mask applicable at the U-C2 reference point. This parameter is used only for G.992.5 and it may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask defined in G.992.5. This is a string of 32 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1. Octets 3-5 - Same, for a 2nd breakpoint. Octets 6-8 - Same, for a 3rd breakpoint. This architecture continues until octets 94-95, which are associated with a 32nd breakpoint. Each subcarrier index is an unsigned number in the range 1 and NSCds. Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are in the range 0 to 190 (0 to -95dBm/Hz). But the range of start-bin and end-bin is in range 0 to 195 (0 to -97.5dBm/Hz). Two break points (6 byte) are reserved for start sub-carrier index and end sub-carrier index. So the range of size is 6 up to 96. When the number of breakpoints is less than 32, all remaining octets are set to the value 0. Note that the content of this object should be correlated with the sub-carriers mask and with the RFI setup.
                     sheAdslLineConfExtnProfilePSDMASKdsEnable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.44 sheadsllineconfenabletype read-only
User custom PSD mask-related parameter used by the ATU-C to use user custom PSD mask. (Not available for ADSL but ADSL2 and ADSL2plus ).
                     sheAdslLineConfExtnProfileConfMinInpUs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.6.1.45 sheadslconfmininptype read-only
New ADSL2+ parameter. The user configures the duration of impulse noise the system should withstand. This parameter configures the value for upstream direction.
             sheAdslLineConfExtnProfileControl 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7
                 sheAdslLineConfExtnProfileControlRequest 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.1 sheadslcontrolrequesttype read-write
modifyAdslLineConfExtnProfile sheAdslLineConfExtnProfileControlIndex sheAdslLineConfExtnProfileControlName ...
                 sheAdslLineConfExtnProfileControlIndex 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.2 integer32 read-write
Index of the table entry to be configured. Needed for modify.
                 sheAdslLineConfExtnProfileControlStatus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.3 shecontrolstatustype read-only
The status of a user command.
                 sheAdslLineConfExtnProfileControlTimer 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.4 gauge32 read-only
The maximum wait time for the manager for a long running user command.
                 sheAdslLineConfExtnProfileControlReqResult 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.5 sheadslcontrolrequestresulttype read-only
The result of the last user command.
                 sheAdslLineConfExtnProfileControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.6 unsigned32 read-only
The time stamp of the last command (end of command).
                 sheAdslLineConfExtnProfileControlName 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.7 snmpadminstring read-write
Descriptional name. The name used during configuration of this profile is equal to the name of the sheAdslLineConfProfile with the identical index.
                 sheAdslLineConfExtnProfileControlParametricTestInputFile 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.8 displaystring read-write
Indicates Name of the Input file from which to take the Mask Array Size, lower and upper mask Array. Null string means no file is specified.
                 sheAdslLineConfExtnProfileControlRsIntCorrectionUp 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.9 sheadsllineconfrsintcorrectiontype read-write
Sets the correction time for the upstream-interleaved buffer. RS can also be disabled. The Default Value for ADSL+ is 3.
                 sheAdslLineConfExtnProfileControlLineType 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.10 sheadslconflinetype read-write
This parameter provisions the DSL physical entity at start-up by defining whether and how the line will be channelized, i.e. which channel type(s) are supported. Defined values are: fastOnly(2) -- only fast channel exists (singleLatency) interleavedOnly(3) -- only interleaved channel exists (singleLatency, default) fastAndInterleaved(5) -- both fast and interleaved channels (dualLatency) exist In case of dualLatency (mode 5), the parameter's sheAdslLineConfProfileAtucConfRateChanRatio and sheAdslLineConfProfileAturConfRateChanRatio configures the bandwith distribution. IMPORTANT NOTE: The configuration of dualLatency mode is only available for NE releases up R2.5!! The modification is only possible for profiles, which are NOT IN USE!
                 sheAdslLineConfExtnProfileControlTxEndBin 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.11 integer read-write
Highest bin number allowed for Tx signal. The Range & default for ADSL+ is 0x06 - 0x1ff respectively. NE will not accept any changes and use always default value! Ne will select the correct values depending on the configuration of the following values: - AnnexType - DmtConfMode - AdvertisedCapability
                 sheAdslLineConfExtnProfileControlTxStartBin 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.12 integer read-write
Lowest bin number allowed for Tx signal.The Range for ADSL+ is 0x06 - 0x1ff. NE will not accept any changes and use always default value! Ne will select the correct values depending on the configuration of the following values: - AnnexType - DmtConfMode - AdvertisedCapability
                 sheAdslLineConfExtnProfileControlMaxBitsPerBin 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.13 integer read-write
Maximum Rx number of bits per bin. NE will not accept any changes and use always default value!
                 sheAdslLineConfExtnProfileControlRxStartBin 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.14 integer read-write
Lowest bin number allowed for Rx signal. NE will not accept any changes and use always default value! Ne will select the correct values depending on the configuration of the following values: - AnnexType - DmtConfMode - AdvertisedCapability
                 sheAdslLineConfExtnProfileControlRxEndBin 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.15 integer read-write
Highest bin number allowed for Rx signal. NE will not accept any changes and use always default value! Ne will select the correct values depending on the configuration of the following values: - AnnexType - DmtConfMode - AdvertisedCapability
                 sheAdslLineConfExtnProfileControlRxBinAdjust 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.16 sheadsllineconfextnprofilerxbinadjusttype read-write
Employs Rx Start/End bin settings. NE will not accept any changes and use always default value!
                 sheAdslLineConfExtnProfileControlTriggerMode 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.17 sheadsllineconftriggermodetype read-write
Indicates the Type of event that triggers fast retrain. NE will not accept any changes and use always default value!
                 sheAdslLineConfExtnProfileControlAdi2x 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.18 sheadsllineconfextnprofileadi2xtype read-write
For non standard compliant ADI CPE. NE will not accept any changes and use always default value!
                 sheAdslLineConfExtnProfileControlStandard 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.19 sheadsllineconfstandardtype read-write
Preferred standard compliance. Outcome is dependent upon standard support of the remote unit.GlobespanVirata High Speed ADSL DMT (ADSL+) applications only. New with R2.8: If the used annexType was set to 'dynamic', the standardTypes 't1413', 'gLite', 'gDmt' and 'readsl2' could NOT be used. 'adsl2_plus_auto' should be the prefered use in that case!
                 sheAdslLineConfExtnProfileControlInitiate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.20 sheadsllineconfinitiatetype read-write
Specifies which end initiates startup. It is also used to send a C-tone to the remote unit. NE will not accept any changes and use always default value!
                 sheAdslLineConfExtnProfileControlTxPowerAttenuation 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.21 sheadsllineconfattenuationtype read-write
Specifies value of Tx power attenuation.
                 sheAdslLineConfExtnProfileControlCodingGain 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.22 sheadsllineconfgaintype read-write
Sets the coding gain in dB increments. NE will not accept any changes and use always default value!
                 sheAdslLineConfExtnProfileControlRsFastOvrhdDown 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.23 sheadsllineconfrsfastovrhdtype read-write
Sets the percentage overhead for the downstream-fast buffer. NE will not accept any changes and use always default value!
                 sheAdslLineConfExtnProfileControlIntCorrectionDown 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.24 sheadsllineconfrsintcorrectiontype read-write
This parameter sets the correction time for the downstream interleaved buffer.RS can also be disabled.
                 sheAdslLineConfExtnProfileControlRsFastOvrhdUp 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.25 sheadsllineconfrsfastovrhdtype read-write
Sets the percentage overhead for the upstream-fast buffer. NE will not accept any changes and use always default value!
                 sheAdslLineConfExtnProfileControlDrStby 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.26 sheadsllineconfenabletype read-write
Provides the ability to disable power to the line driver. NE will not accept any changes and use always default value!
                 sheAdslLineConfExtnProfileControlExpandedExchange 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.27 sheadsllineconfexpandedexchangetype read-write
This object is used to Enable/Disable EES. NE will not accept any changes and use always default value!
                 sheAdslLineConfExtnProfileControlEscapeFastRetrainEnable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.28 sheadsllineconfenabletype read-write
This object is used to Enable/ Disable escape to the fast retrain capability. NE will not accept any changes and use always default value!
                 sheAdslLineConfExtnProfileControlFastRetrainEnable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.29 sheadsllineconfenablespecial3type read-write
This object is used to Enable/ Disable the fast retrain capability. NE will not accept any changes and use always default value!
                 sheAdslLineConfExtnProfileControlBitSwap 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.30 sheadsllineconfenablespecial2type read-write
This object is used to Enable/Disable bit swapping.
                 sheAdslLineConfExtnProfileControlNtr 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.31 sheadsllineconfntrtype read-write
This object is used to Enable/ Disable NTR on a per chip basis.
                 sheAdslLineConfExtnProfileControlAnnexType 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.32 sheadsllineconfannextype read-write
This parameter is set as per annex compliance of the code release. GlobespanVirata High Speed ADSL DMT (ADSL+) applications only. New with R2.8: dynamic(50) If the used annexType was set to 'dynamic', such a profile could be assigned to any type of supported ADSL IU. The IU will select the supported annex himself, depending on HW restrictions and line parameters. This selection made additional restrictions to the following parameters: - tx/rx start and end bin usage - profile Standard - profile AdvertisedCapabilities - profileLineDmtConfMode
                 sheAdslLineConfExtnProfileControlAlctlUsVer 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.33 sheadsllineconfextnprofilealctlusvertype read-write
This object is used for T1.413 demo purposes only. NE will not accept any changes and use always default value!
                 sheAdslLineConfExtnProfileControlUseCustomBin 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.34 sheadsllineconfenablespecial2type read-write
This object is used to Enable/ Disable user selection on which of the 256 bins will be enabled for downstream transmission.
                 sheAdslLineConfExtnProfileControlDnBinUsage 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.35 octet string read-write
The parameter where a 1 in bit position indicates usage of corresponding bin,whereas a 0 disables usage of corresponding bin.
                 sheAdslLineConfExtnProfileControlMaxDCo 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.36 sheadsllineconfintdephttype read-write
This object is used to indicate Maximum interleaving depth supported by the customer's hardware.
                 sheAdslLineConfExtnProfileControlFullRetrain 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.37 sheadsllineconfenablespecial3type read-write
This object is used to Indicate enable/disable of auto retrain capability. NE will not accept any changes and use always default value!
                 sheAdslLineConfExtnProfileControlAdvertisedCapabilities 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.38 sheadsllineconfadvertisedcapabilitiestype read-write
Controls if the CO will attempt to startup using alternate standards if the CPE does not support ADSL+. New with R2.8: If the used annexType was set to 'dynamic', this parameter should be set to 'disabled' or 'adslPlus'. All other values will not work with the intended set of dynamic annexType selection by IU.
                 sheAdslLineConfExtnProfileControlPsdMaskType 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.39 sheadsllineconfpsdmasktype read-write
Selects the PSD mask option to be used.
                 sheAdslLineConfExtnProfileControlLineDmtConfMode 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.40 sheadsllineconflinedmtconfmodetype read-write
Selects if there is overlap or no overlap of bins. Overlapping is only supported by non ISDN profiles and will change the setting for TxStartBin accordingly!!. New with R2.8: If the used annexType was set to 'dynamic', this parameter should be set to 'fdmMode' only. Other values will not work with the intended set of dynamic annexType selection by IU.
                 sheAdslLineConfExtnProfileControlEraseProfiles 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.41 sheadsllineconfenablespecial2type read-write
Enables/Disables the ability to erase all fast retrain profiles at startup.
                 sheAdslLineConfExtnProfileControlParamHybridLossTestStart 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.43 integer read-write
Indicates Start bin for range of bins to be measured.
                 sheAdslLineConfExtnProfileControlParamHybridLossTestEnd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.44 integer read-write
Indicates End bin for range of bins to be measured.
                 sheAdslLineConfExtnProfileControlConfMinInp 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.45 sheadslconfmininptype read-write
Look at table.
                 sheAdslLineConfExtnProfileControlRfiBandMask 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.46 octet string read-write
BitMask for sheAdslRfiBandIndex in sheAdslRfiBandTable.
                 sheAdslLineConfExtnProfileControlUpstreamPsdMaskSelection 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.47 sheadsllineconfupstreampsdmaskselectiontype read-write
This configuration parameter defines which upstream PSD mask is enabled. This parameter is used only for annexes J and M of ITU-T Recs. G.992-3 and G.992.5
                 sheAdslLineConfExtnProfileControlMaxNomPsdDs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.48 integer read-write
The maximum nominal transmit PSD in the downstream direction during initialization and Showtime. It ranges from -600 to -300 units of 0.1 dBm/Hz. (physical values are -60 to -30 dBm/Hz).
                 sheAdslLineConfExtnProfileControlMaxNomAtpDs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.49 gauge32 read-write
The maximum nominal aggregate transmit power in the downstream direction during initialization and Showtime. It ranges from 0 to 255 units of 0.1 dBm (physical values are 0 to 25.5 dBm).
                 sheAdslLineConfExtnProfileControlPsdMaskDs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.50 octet string read-write
The downstream PSD mask applicable at the U-C2 reference point. This parameter is used only for G.992.5 and it may impose PSD restrictions (breakpoints) in addition to the Limit PSD mask defined in G.992.5. This is a string of 32 pairs of values in the following structure: Octets 0+1 - Index of 1st sub-carrier used in the context of a first breakpoint. Octet 2 - The PSD reduction for the sub-carrier indicated in octets 0 and 1. Octets 3-5 - Same, for a 2nd breakpoint. Octets 6-8 - Same, for a 3rd breakpoint. This architecture continues until octets 94-95, which are associated with a 32nd breakpoint. Each subcarrier index is an unsigned number in the range 1 and NSCds. Each PSD reduction value is in the range 0 (0dBm/Hz) to 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are in the range 0 to 190 (0 to -95dBm/Hz). But the range of start-bin and end-bin is in range 0 to 195 (0 to -97.5dBm/Hz). Two break points (6 byte) are reserved for start sub-carrier index and end sub-carrier index. So the range of size is 6 up to 96. When the number of breakpoints is less than 32, all remaining octets are set to the value 0. Note that the content of this object should be correlated with the sub-carriers mask and with the RFI setup.
                 sheAdslLineConfExtnProfileControlPSDMASKdsEnable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.51 sheadsllineconfenabletype read-write
User custom PSD mask-related parameter used by the ATU-C to use user custom PSD mask. (Not available for ADSL but ADSL2 and ADSL2plus ).
                 sheAdslLineConfExtnProfileControlPSDMASKdsRequestResult 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.52 sheadslcontrolpsdmaskdsrequestresulttype read-only
The result of the last psd commmand
                 sheAdslLineConfExtnProfileControlConfMinInpUs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.7.53 sheadslconfmininptype read-write
Look at table.
             sheAdslLineTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.8 no-access
This table includes common attributes describing both ends of the line. It is required for all ADSL physical interfaces. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94).
                 sheAdslLineEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.8.1 no-access
An entry in adslLineTable.
                     sheAdslLineCoding 1.3.6.1.4.1.231.7.1.2.1.6.1.1.8.1.1 adsllinecodingtype read-only
Specifies the ADSL coding type used on this line.
                     sheAdslLineType 1.3.6.1.4.1.231.7.1.2.1.6.1.1.8.1.2 sheadslconflinetype read-only
Shows the type of ADSL physical line entity that exists, by defining whether and how the line is channelized. If the line is channelized, the value will be other than noChannel(1). This object shows which channel type(s) are currently supported. This values are possible: no channels exist (maybe line is not accessible) fast channel exists only (singleLatency) interleaved channel exists only (singleLatency) fast and interleaved channel exist (dualLatency)
                     sheAdslLineSpecific 1.3.6.1.4.1.231.7.1.2.1.6.1.1.8.1.3 variablepointer read-only
OID instance in vendor-specific MIB. The Instance may be used to determine shelf/slot/port of the ATUC interface in a DSLAM.
                     sheAdslLineConfProfile 1.3.6.1.4.1.231.7.1.2.1.6.1.1.8.1.4 snmpadminstring read-only
The value of this object identifies the row in the ADSL Line Configuration Profile Table, which applies for this ADSL line, and channels if applicable. A 'DEFVAL' profile will always be exist and set per default.
                     sheAdslLineAlarmConfProfile 1.3.6.1.4.1.231.7.1.2.1.6.1.1.8.1.6 snmpadminstring read-only
The value of this object identifies the row in the ADSL Line Alarm Configuration Profile Table, which applies to this ADSL line, and channels if applicable. A 'DEFAULT' profile will always be exist and set.
                     sheAdslLineAction 1.3.6.1.4.1.231.7.1.2.1.6.1.1.8.1.7 sheadsllineactiontype read-only
This object indicates parameter that allows actions on a per line basis. These actions include abort, startup, and tests.
                     sheAdslLineLineDmtTrellis 1.3.6.1.4.1.231.7.1.2.1.6.1.1.8.1.8 sheadsllinetrellismodetype read-only
Parameter that indicates whether trellis coding has been enabled or disabled. Trellis coding should always be enabled for its clear performance advantage. trellisOn(1), trellisOff(2)
                     sheAdslLineUtopiaL2RxAddr 1.3.6.1.4.1.231.7.1.2.1.6.1.1.8.1.9 integer read-only
This object indicates UTOPIA Level 2 Rx address for a line.
                     sheAdslLineUtopiaL2TxAddr 1.3.6.1.4.1.231.7.1.2.1.6.1.1.8.1.10 integer read-only
This object indicates UTOPIA Level 2 Tx address for a line.
                     sheAdslLineClockType 1.3.6.1.4.1.231.7.1.2.1.6.1.1.8.1.12 sheadsllineclocktype read-only
This object indicates parameter to set use of either crystal or oscillator.
                     sheAdslLineAtucCapability 1.3.6.1.4.1.231.7.1.2.1.6.1.1.8.1.13 sheadslatuxcapabilitytype read-only
The capability of co-side. Be aware that multiple bits could be set! Each bit set to 1 means, that the corresponding standart is supported.
                     sheAdslLineAturCapability 1.3.6.1.4.1.231.7.1.2.1.6.1.1.8.1.14 sheadslatuxcapabilitytype read-only
The capability of remote-side. Only available if line has trained - otherwise 0. Be aware that multiple bits could be set! Each bit set to 1 means, that the corresponding standart is supported.
                     sheAdslLineAtuActualCapability 1.3.6.1.4.1.231.7.1.2.1.6.1.1.8.1.15 sheadslatuxcapabilitytype read-only
The actual used capability of the line. Only available if line has trained - otherwise 0. Each bit set to 1 means, that the corresponding standart is supported.
                     sheAdslLinePwrMgmtPMSF 1.3.6.1.4.1.231.7.1.2.1.6.1.1.8.1.16 sheadslpwrmgmtpmsftype read-only
This object indicates the action that forces a change in the line state of power management. (Not available for ADSL G992.1) Valid values: pmsfL0ToL2StateForce(1) -> testmode, set running line to L2 power safe mode pmsfL2ToL0StateForce(3) -> switch back line from L2 power safe mode to full power L0 state The transitions pmsfL3ToL0StateForce (unlock) and pmsfL3StateForce (lock) should always be done via ifAdminState setting.
                     sheAdslLineDeltConfLDSF 1.3.6.1.4.1.231.7.1.2.1.6.1.1.8.1.17 sheadsllinedeltconfldsftype read-only
DELT-related parameter used by the ATU-C to force the line into loop diagnostics mode. (Not available for ADSL but ADSL2 and ADSL2plus ).
                     sheAdslLineRfiBandMask 1.3.6.1.4.1.231.7.1.2.1.6.1.1.8.1.18 octet string read-only
BitMask for used sheAdslRfiBandIndex. A Bit-Position correspond's with an index in sheAdslRfiBandTable and mark configured RFI bands they are used for this profile.
                     sheAdslLineDpboProfile 1.3.6.1.4.1.231.7.1.2.1.6.1.1.8.1.19 snmpadminstring read-only
The value of this object identifies the row in the AdslLineDpboProfile Table, which applies for this ADSL line. No 'DEFVAL' profile will exist. Per default no profile is assigned!
             sheAdslLineControl 1.3.6.1.4.1.231.7.1.2.1.6.1.1.9
                 sheAdslLineControlRequest 1.3.6.1.4.1.231.7.1.2.1.6.1.1.9.1 sheadslcontrolrequesttype read-write
modifyAdslLineEntry: sheAdslLineControlIndex sheAdslLineControlConfProfile sheAdslLineControlAction modifyAdslLineAlarmConfProfileEntry: sheAdslLineControlIndex sheAdslLineControlAlarmConfProfile forceAdslLinePwrMgmtState: vheAdslLineControlIndex sheAdslLineControlPwrMgmtPMSF modifyAdslLineDeltConfEntry: sheAdslLineControlIndex sheAdslLineControlDeltConfLDSF modifyAdslLineRfiBandMask: sheAdslLineControlIndex sheAdslLineControlRfiBandMask ##New for SHR R2.6 setAdslLineDpboProfileEntry: sheAdslLineControlIndex sheAdslLineControlDpboProfile
                 sheAdslLineControlIndex 1.3.6.1.4.1.231.7.1.2.1.6.1.1.9.2 integer32 read-write
IfIndex of the configured adsl-interface.
                 sheAdslLineControlStatus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.9.3 shecontrolstatustype read-only
The status of a user command.
                 sheAdslLineControlTimer 1.3.6.1.4.1.231.7.1.2.1.6.1.1.9.4 gauge32 read-only
The maximum wait time for the manager for a long running user command.
                 sheAdslLineControlReqResult 1.3.6.1.4.1.231.7.1.2.1.6.1.1.9.5 sheadslcontrolrequestresulttype read-only
The result of the last user command.
                 sheAdslLineControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.6.1.1.9.6 unsigned32 read-only
The time stamp of the last command (end of command).
                 sheAdslLineControlConfProfile 1.3.6.1.4.1.231.7.1.2.1.6.1.1.9.7 snmpadminstring read-write
The value of this object identifies the row in the ADSL Line Configuration Profile Table, (adslLineConfProfileTable), which applies for this ADSL line, and channels if applicable. For the used `dynamic' mode, in the case which the configuration profile has not been set, the value will be set to `DEFVAL'.
                 sheAdslLineControlAlarmConfProfile 1.3.6.1.4.1.231.7.1.2.1.6.1.1.9.9 snmpadminstring read-write
The value of this object identifies the row in the ADSL Line Alarm Configuration Profile Table, (adslLineAlarmConfProfileTable), which applies to this ADSL line, and channels if applicable. For the used `dynamic' mode, in the case which the alarm profile has not been set, the value will be set to `DEFVAL'.
                 sheAdslLineControlAction 1.3.6.1.4.1.231.7.1.2.1.6.1.1.9.10 sheadsllineactiontype read-write
This object indicates parameter that allows actions on a per line basis. These actions include abort, startup, and tests.
                 sheAdslLineControlPwrMgmtPMSF 1.3.6.1.4.1.231.7.1.2.1.6.1.1.9.11 sheadslpwrmgmtpmsftype read-write
Force a change in the line state of power management. (Not available for ADSL G992.1) Valid values: pmsfL0ToL2StateForce(1) -> testmode, set running line to L2 power safe mode pmsfL2ToL0StateForce(3) -> switch back line from L2 power safe mode to full power L0 state The transitions pmsfL3ToL0StateForce (unlock) and pmsfL3StateForce (lock) should always be done via ifAdminState setting.
                 sheAdslLineControlDeltConfLDSF 1.3.6.1.4.1.231.7.1.2.1.6.1.1.9.12 sheadsllinedeltconfldsftype read-write
DELT-related parameter used by the ATU-C to force the line into loop diagnostics mode. (Not available for ADSL but ADSL2 and ADSL2plus ).
                 sheAdslLineControlRfiBandMask 1.3.6.1.4.1.231.7.1.2.1.6.1.1.9.13 octet string read-write
BitMask for sheAdslRfiBandIndex in sheAdslRfiBandTable.
                 sheAdslLineControlDpboProfile 1.3.6.1.4.1.231.7.1.2.1.6.1.1.9.14 snmpadminstring read-write
The value of this object identifies the row in the AdslLineDpboProfile Table, which applies for this ADSL line.
             sheAdslAtucPhysTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10 no-access
This table provides one row for each ATUC. Each row contains the Physical Layer Parameters table for that ATUC. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94).
                   sheAdslAtucPhysEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1 no-access
An entry in the adslAtucPhysTable.
                       sheAdslAtucPhysInvSerialNumber 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.1 snmpadminstring read-only
The vendor specific string that identifies the vendor equipment.
                       sheAdslAtucPhysInvVendorID 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.2 snmpadminstring read-only
The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters.
                       sheAdslAtucPhysInvVersionNumber 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.3 snmpadminstring read-only
The vendor specific version number sent by this ATU as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[10] and expressed as readable characters.
                       sheAdslAtucPhysCurrSnrMgn 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.4 integer read-only
Noise Margin as seen by this ATU with respect to its received signal in tenth dB.
                       sheAdslAtucPhysCurrAtn 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.5 gauge32 read-only
Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU.
                       sheAdslAtucPhysCurrStatus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.6 sheadsllinecurrentstatustype read-only
Indicates current state of the ATUC line. This is a bit-map of possible conditions. The various bit positions are: 0 noDefect There no defects on the line 1 lossOfFraming ATUC failure due to not receiving valid frame. 2 lossOfSignal ATUC failure due to not receiving signal. 3 lossOfPower ATUC failure due to loss of power. Note: the Agent may still function. 4 lossOfSignalQuality Loss of Signal Quality is declared when the Noise Margin falls below the Minimum Noise Margin, or the bit-error-rate exceeds 10^-7. 5 lossOfLink ATUC failure due to inability to link with ATUR. 6 dataInitFailure ATUC failure during initialization due to bit errors corrupting startup exchange data. 7 configInitFailure ATUC failure during initialization due to peer ATU not able to support requested configuration 8 protocolInitFailure ATUC failure during initialization due to incompatible protocol used by the peer ATU. 9 noPeerAtuPresent ATUC failure during initialization due to no activation sequence detected from peer ATU. This is intended to supplement ifOperStatus.
                       sheAdslAtucPhysCurrOutputPwr 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.7 integer read-only
Measured total output power transmitted by this ATU. This is the measurement that was reported during the last activation sequence.
                       sheAdslAtucPhysCurrAttainableRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.8 gauge32 read-only
Indicates the maximum currently attainable data rate by the ATU. This value will be equal or greater than the current line rate.
                       sheAdslAtucPhysOpState 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.9 sheadsllineopstatetype read-only
This object indicates the operational state of the ATU. Values include idle,handshake, training, Delt mode (loop diagnostic mode), etc. idle(0), data(1), bootUpLoad(8), handshake(16), training(24), framerSync(26), fastRetrainInProg(27), llTest(128), dlTest(131), txTest(132), atmLpTest(133), discovery(46), deltTraining(139), delt(140)
                       sheAdslAtucPhysActualStd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.10 sheadsllineconfstandardtype read-only
This object provides actual ATU-C configuration based on outcome of negotiation with ATU-R. In this case, the parameter provides actual standard used for the connection.
                       sheAdslAtucPhysBertError 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.11 unsigned32 read-only
This object indicates the No. of bit errors detected during BERT.
                       sheAdslAtucPhysTxAtmCellCounter 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.12 counter32 read-only
This object Provides transmit ATM cell counter.
                       sheAdslAtucPhysRxAtmCellCounter 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.13 unsigned32 read-only
This object Provides receive ATM cell counter.
                       sheAdslAtucPhysStartProgress 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.14 unsigned32 read-only
This object provides current detailed start up information to be used for debugging.
                       sheAdslAtucPhysIdleBertError 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.15 unsigned32 read-only
Number of bit errors.
                       sheAdslAtucPhysIdleBertCells 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.16 unsigned32 read-only
Number of idle cells.
                       sheAdslAtucPhysBertSync 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.17 sheadslatucphysbertsynctype read-only
Indicates if the Signal is in Sync or not.
                       sheAdslAtucPhysParametricTestResult 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.18 sheadslatucphysparametrictestresulttype read-only
Indicates the Result of the Parametric Test conducted on the Xcvr.
                       sheAdslAtucPwrMgmtState 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.19 sheadslpwrmgmtstatetype read-only
Line Power Management State. (Not valid for ADSL G992.1)
                       sheAdslAtucPhysDeltHLINSCus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.20 unsigned32 read-only
DELT-related parameter that provides the scale factor to be applied to the upstream Hlin(f) values. Only available after a loop diagnostic procedure. (Not available for ADSL but ADSL2 & ADSL2plus).
                       sheAdslAtucPhysDeltHLINpsus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.21 octet string read-only
DELT-related parameter that provides an array of complex upstream Hlin(f) values in linear scale. Every two octects refer to one element in this array of octets. (Not available for ADSL but ADSL2 & ADSL2plus). This parameter is an array of complex upstream Hlin(f) values in linear scale. Each array entry represents the Hlin(f = i*HLINGus* delta(f)) value for a particular subcarrier group index i, ranging from 0 to MIN(NSCus - 1,511). The Hlin(f) is represented as ((scale/2(exp15))*((a(i) + j*b(i))/2(exp15))), with scale being coded as a 16-bit unsigned integer and, a(i) and b(i) coded as 16-bit 2s complement signed integers in the (-2(exp15) + 1) to (+2(exp15) - 1) range. A special value a(i) = b(i) = -2(exp15) indicates that no measurement could be done for this subcarrier group because it is out of the passband or that the attenuation is out of range to be represented. This parameter is only available after a loop diagnostic procedure.
                       sheAdslAtucPhysDeltHLOGMTus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.22 unsigned32 read-only
DELT-related parameter that provides the number of symbols used to measure the upstream Hlog(f). (Not available for ADSL but ADSL2 & ADSL2plus).
                       sheAdslAtucPhysDeltHLOGpsus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.23 octet string read-only
DELT-related parameter that provides an array of real upstream Hlog(f) values in dB. (Not available for ADSL but ADSL2 & ADSL2plus). This parameter is an array of real upstream Hlog(f) values in dB. Each array entry represents the real Hlog(f = i*HLOGGus* delta(f)) value for a particular subcarrier group sub-carrier index i, ranging from 0 to MIN(NSCus - 1,511). The real Hlog(f) value is represented as (6 - m(i)/10), with m(i) 10-bit unsigned integer in the 0 to 1022 range. A special value m = 1023 indicates that no measurement could be done for this subcarrier group because it is out of the passband or that the attenuation is out of range to be represented.
                       sheAdslAtucPhysDeltQLNMTus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.24 unsigned32 read-only
DELT-related parameter that provides the number of symbols used to measure the upstream QLN(f) values. (Not available for ADSL but ADSL2 & ADSL2plus).
                       sheAdslAtucPhysDeltQLNpsus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.25 octet string read-only
DELT-related parameter that provides an array of real upstream QLN(f) values in dBm/Hz. Every two octects refer to one element in this array of octets. (Not available for ADSL but ADSL2 & ADSL2plus) This parameter is an array of real upstream QLN(f) values in dBm/Hz. Each array entry represents the QLN(f = i*QLNGus* delta(f)) value for a particular subcarrier group index i, ranging from 0 to MIN(NSCus - 1,511). The QLN(f) is represented as (-23 - n(i)/2), with n(i) an 8-bit unsigned integer in the 0 to 254 range. A special value n(i) = 255 indicates that no measurement could be done for this subcarrier group because it is out of the passband or that the noise PSD is out of range to be represented.
                       sheAdslAtucPhysActState 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.26 sheadsllineactstatetype read-only
This object indicates the result of the ATU's line activation. Values include no error etc.
                       sheAdslAtucPhysCurrentBinStatus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.27 octet string read-only
This parameter represent the current bin status of used subcarriers. Each octet map to the corresponding bin.
                       sheAdslAtucPhysCurrentBinBitLoading 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.28 octet string read-only
This parameter represent the current used bit loading per bin in upstream direction. Each octet map to the corresponding bin.
                       sheAdslAtucPhysDeltSNRMTus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.29 unsigned32 read-only
DELT-related parameter that provides the number of symbols used to measure the upstream SNR(f) values. (Not available for ADSL and ADSL2plus) It is represented as a 16-bit unsigned value. After a loop diagnostic procedure, this parameter shall contain the number of symbols used to generate the associate parameter. It should correspond to the value specified in the Recommendation (e.g., the number of symbols in 1 s time interval for G.992.3).
                       sheAdslAtucPhysDeltDMTBinSNRus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.30 octet string read-only
DELT-related parameter that provides an array of real upstream SNR(f) values in dB (Not available for ADSL and ADSL2plus) It is coded in the same way as the related downstream parameter.
                       sheAdslAtucPhysDeltLastTxState 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.31 sheadslphysatucdeltlasttxstatetype read-only
DELT-related parameter that provides last successful transmitted initialization state by the ATU-C. (Not available for ADSL and ADSL2plus) Initialization states are defined in the individual ADSL Recommendations and are counted from 0 (if G.994.1 is used) or 1 (if G.994.1 is not used) up to Showtime. This parameter must be interpreted along with the ADSL Transmission System. This parameter is available only when, after a failed full initialization, the line diagnostics procedures are activated on the line. Line diagnostics procedures can be activated by the operator of the system (through the Line State Forced line configuration parameter) or autonomously by the ATU-C or ATU-R.
                       sheAdslAtucPhysDeltSATNus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.10.1.32 unsigned32 read-only
DELT-related parameter that provides the uptream signal attenuation (length = 4 bytes). (Not available for ADSL and ADSL2plus). This parameter is the measured difference in dB in the total power transmitted by the ATU-R and the total power received by the ATU-C over all subcarriers during showtime. The upstream line attenuation ranges from 0 to +127 dB with 0.1 dB steps. A special value indicates the line attenuation is out of range to be represented. NOTE: During showtime, only a subset of the subcarriers may be transmitted by the ATU-R, as compared to diagnostics mode and initialization. Therefore, the upstream Signal attenuation may be significantly lower than the upstream Line attenuation.
             sheAdslAtucChanTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.11 no-access
This table provides one row for each ATUC channel.
                   sheAdslAtucChanEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.11.1 no-access
An entry in the adslAtucChanTable. This table is only supported by NE releases smaller then R2.5 (NO dualLatency support)!!
                       sheAdslAtucChanInterleaveDelay 1.3.6.1.4.1.231.7.1.2.1.6.1.1.11.1.1 gauge32 read-only
Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency. In the case where the ifType is Fast(125), use noSuchObject.
                       sheAdslAtucChanCurrTxRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.11.1.2 gauge32 read-only
Actual transmit rate on this channel.
                       sheAdslAtucChanPrevTxRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.11.1.3 gauge32 read-only
The rate at the time of the last adslAtucRateChangeTrap event. It is also set at initialization to prevent a trap being sent. Rate changes less than adslAtucThresh(*)RateDown or less than adslAtucThresh(*)RateUp will not cause a trap or cause this object to change. (*) == Fast or Interleave. See AdslLineAlarmConfProfileEntry.
                       sheAdslAtucChanCrcBlockLength 1.3.6.1.4.1.231.7.1.2.1.6.1.1.11.1.4 gauge32 read-only
Indicates the length of the channel data-block on which the CRC operates. Refer to Line Code Specific MIBs, [11] and [12] for more information.
                       sheAdslAtucChanCurrAtmStatus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.11.1.5 sheadsllineatmstatus read-only
indicates an ncd or lcd failure if the counter surpasses 127. If neither ATM counter surpasses 127, the return value will be 'NoAtmDefect'. noAtmDefect(0), noCellDeleniation(1), lossOfCellDeleniation(2)
                       sheAdslAtucChanRsSymbols 1.3.6.1.4.1.231.7.1.2.1.6.1.1.11.1.6 unsigned32 read-only
Indicates number of DMT symbols per Reed-Solomon code word (S) in the downstream direction. Note that S is not restricted to interleaved mode only. Even in fast mode, S is a valid constant value and is equal to 1.
                       sheAdslAtucChanRsDepth 1.3.6.1.4.1.231.7.1.2.1.6.1.1.11.1.7 unsigned32 read-only
Indicates interleaving depth (D) in the downstream direction. Note that D is not restricted to interleaved mode only. Even in fast mode, D is a valid constant value and is equal to 1.
                       sheAdslAtucChanRsRedundancy 1.3.6.1.4.1.231.7.1.2.1.6.1.1.11.1.8 unsigned32 read-only
Indicates number of redundant bytes (R) per Reed-Solomon code in the downstream direction.
             sheAdslAtucPerfDataTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12 no-access
This table provides one row for each ATUC. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94).
                   sheAdslAtucPerfDataEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1 no-access
An entry in adslAtucPerfDataTable.
                       sheAdslAtucPerfDataLofs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.1 counter32 read-only
Count of the number of Loss of Framing failures since agent reset.
                       sheAdslAtucPerfDataLoss 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.2 counter32 read-only
Count of the number of Loss of Signal failures since agent reset.
                       sheAdslAtucPerfDataLols 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.3 counter32 read-only
Count of the number of Loss of Link failures since agent reset.
                       sheAdslAtucPerfDataLprs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.4 counter32 read-only
Count of the number of Loss of Power failures since agent reset.
                       sheAdslAtucPerfDataESs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.5 counter32 read-only
Count of the number of Errored Seconds since agent reset. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.
                       sheAdslAtucPerfDataInits 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.6 counter32 read-only
Count of the line initialization attempts since agent reset. Includes both successful and failed attempts.
                       sheAdslAtucPerfDataStatFastR 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.7 gauge32 read-only
The value of this object indicates the count of fast retrains.
                       sheAdslAtucPerfDataStatFailedFastR 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.8 gauge32 read-only
The value of this object indicates the count of failed fast retrains.
                       sheAdslAtucPerfDataStatSesL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.9 gauge32 read-only
The value of this object indicates the count of severely errored second line.
                       sheAdslAtucPerfDataStatUasL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.10 gauge32 read-only
The value of this object indicates the count of unavailable errored seconds.
                       sheAdslAtucPerfDataValidIntervals 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.11 integer read-only
The number of previous 15-minute intervals in the interval table for which data was collected. Given that is the maximum # of intervals supported. The value will be unless the measurement was (re-)started within the last (*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
                       sheAdslAtucPerfDataInvalidIntervals 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.12 integer read-only
The number of intervals in the range from 0 to the value of adslAtucPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
                       sheAdslAtucPerfDataCurr15MinTimeElapsed 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.13 adslperftimeelapsed read-only
Total elapsed seconds in this interval.
                       sheAdslAtucPerfDataCurr15MinLofs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.14 perfcurrentcount read-only
Count of seconds in the current 15 minute interval when there was Loss of Framing.
                       sheAdslAtucPerfDataCurr15MinLoss 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.15 perfcurrentcount read-only
Count of seconds in the current 15 minute interval when there was Loss of Signal.
                       sheAdslAtucPerfDataCurr15MinLols 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.16 perfcurrentcount read-only
Count of seconds in the current 15 minute interval when there was Loss of Link.
                       sheAdslAtucPerfDataCurr15MinLprs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.17 perfcurrentcount read-only
Count of seconds in the current 15 minute interval when there was Loss of Power.
                       sheAdslAtucPerfDataCurr15MinESs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.18 perfcurrentcount read-only
Count of Errored Seconds in the current 15 minute interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.
                       sheAdslAtucPerfDataCurr15MinInits 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.19 perfcurrentcount read-only
Count of the line initialization attempts in the current 15 minute interval. Includes both successful and failed attempts.
                       sheAdslAtucPerfDataCurr15MinFastR 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.20 gauge32 read-only
Count of seconds in the current 15 minute interval when there was fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.1
                       sheAdslAtucPerfDataCurr15MinFailedFastR 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.21 gauge32 read-only
Count of seconds in the current 15 minute interval when there was failed fast retrains. REFERENCE ITU G.997.1 Section 7.4.15.2
                       sheAdslAtucPerfDataCurr15MinSesL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.22 gauge32 read-only
Count of seconds in the current 15 minute interval when there was severely errored seconds. REFERENCE ITU G.997.1 Section 7.2.1.1.7
                       sheAdslAtucPerfDataCurr15MinUasL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.23 gauge32 read-only
Count of seconds in the current 15 minute interval when there was count for unavailable errored seconds. REFERENCE ITU G.997.1 Section 7.2.1.1.9
                       sheAdslAtucPerfDataCurr1DayTimeElapsed 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.24 adslperftimeelapsed read-only
Number of seconds that have elapsed since the beginning of the current 1-day interval.
                       sheAdslAtucPerfDataCurr1DayLofs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.25 adslperfcurrdaycount read-only
Count of the number of seconds when there was Loss of Framing during the current day as measured by adslAtucPerfCurr1DayTimeElapsed.
                       sheAdslAtucPerfDataCurr1DayLoss 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.26 adslperfcurrdaycount read-only
Count of the number of seconds when there was Loss of Signal during the current day as measured by adslAtucPerfCurr1DayTimeElapsed.
                       sheAdslAtucPerfDataCurr1DayLols 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.27 adslperfcurrdaycount read-only
Count of the number of seconds when there was Loss of Link during the current day as measured by adslAtucPerfCurr1DayTimeElapsed.
                       sheAdslAtucPerfDataCurr1DayLprs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.28 adslperfcurrdaycount read-only
Count of the number of seconds when there was Loss of Power during the current day as measured by adslAtucPerfCurr1DayTimeElapsed.
                       sheAdslAtucPerfDataCurr1DayESs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.29 adslperfcurrdaycount read-only
Count of Errored Seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.
                       sheAdslAtucPerfDataCurr1DayInits 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.30 adslperfcurrdaycount read-only
Count of the line initialization attempts in the day as measured by adslAtucPerfCurr1DayTimeElapsed. Includes both successful and failed attempts.
                       sheAdslAtucPerfDataCurr1DayFastR 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.31 gauge32 read-only
Count of the number of seconds when there was fast retrains during the current day as measured by adslAtucPerfCurr1Day TimeElapsed. REFERENCE ITU G.997.1 Section 7.4.15.1
                       sheAdslAtucPerfDataCurr1DayFailedFastR 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.32 gauge32 read-only
Count of the number of seconds when there was failed fast retrains during the current day as measured by adslAtucPerfCurr1Day TimeElapsed.REFERENCE ITU G.997.1 Section 7.4.15.2
                       sheAdslAtucPerfDataCurr1DaySesL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.33 gauge32 read-only
Count of the number of seconds when there was Severely Errored Seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. REFERENCE ITU G.997.1 Section 7.2.1.1.7
                       sheAdslAtucPerfDataCurr1DayUasL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.34 gauge32 read-only
Count of the number of seconds when there was Unavailable Errored Seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. REFERENCE ITU G.997.1 Section 7.2.1.1.9
                       sheAdslAtucPerfDataPrev1DayTimeElapsed 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.35 gauge32 read-only
Total elapsed seconds in this interval in seconds.
                       sheAdslAtucPerfDataPrev1DayMoniSecs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.36 integer read-only
The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected for any reason.
                       sheAdslAtucPerfDataPrev1DayLofs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.37 adslperfprevdaycount read-only
Count of seconds in the interval when there was Loss of Framing within the most recent previous 1-day period.
                       sheAdslAtucPerfDataPrev1DayLoss 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.38 adslperfprevdaycount read-only
Count of seconds in the interval when there was Loss of Signal within the most recent previous 1-day period.
                       sheAdslAtucPerfDataPrev1DayLols 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.39 adslperfprevdaycount read-only
Count of seconds in the interval when there was Loss of Link within the most recent previous 1-day period.
                       sheAdslAtucPerfDataPrev1DayLprs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.40 adslperfprevdaycount read-only
Count of seconds in the interval when there was Loss of Power within the most recent previous 1-day period.
                       sheAdslAtucPerfDataPrev1DayESs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.41 adslperfprevdaycount read-only
Count of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.
                       sheAdslAtucPerfDataPrev1DayInits 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.42 adslperfprevdaycount read-only
Count of the line initialization attempts in the most recent previous 1-day period. Includes both successful and failed attempts.
                       sheAdslAtucPerfDataPrev1DayFastR 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.43 gauge32 read-only
Count of seconds in the interval when there was fast retrains within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.4.15.1
                       sheAdslAtucPerfDataPrev1DayFailedFastR 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.44 gauge32 read-only
Count of seconds in the interval when there was failed fast retrains within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.4.15.2
                       sheAdslAtucPerfDataPrev1DaySesL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.45 gauge32 read-only
Count of seconds in the interval when there was severely errored seconds within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.2.1.1.7
                       sheAdslAtucPerfDataPrev1DayUasL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.12.1.46 gauge32 read-only
Count of seconds in the interval when there was unavailable errored seconds within the most recent previous 1 day period. REFERENCE ITU G.997.1 Section 7.2.1.1.9
             sheAdslAtucIntervalTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.13 no-access
This table provides one row for each ATUC performance data collection interval. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94).
                   sheAdslAtucIntervalEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.13.1 no-access
An entry in the adslAtucIntervalTable.
                       sheAdslAtucIntervalNumber 1.3.6.1.4.1.231.7.1.2.1.6.1.1.13.1.1 integer read-only
Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional.
                       sheAdslAtucIntervalValidData 1.3.6.1.4.1.231.7.1.2.1.6.1.1.13.1.2 truthvalue read-only
This variable indicates if the data for this interval is valid.
                       sheAdslAtucIntervalEndTime 1.3.6.1.4.1.231.7.1.2.1.6.1.1.13.1.3 unsigned32 read-only
This variable indicates the time of storing this interval.
                       sheAdslAtucIntervalLofs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.13.1.4 perfintervalcount read-only
Count of seconds in the interval when there was Loss of Framing.
                       sheAdslAtucIntervalLoss 1.3.6.1.4.1.231.7.1.2.1.6.1.1.13.1.5 perfintervalcount read-only
Count of seconds in the interval when there was Loss of Signal.
                       sheAdslAtucIntervalLols 1.3.6.1.4.1.231.7.1.2.1.6.1.1.13.1.6 perfintervalcount read-only
Count of seconds in the interval when there was Loss of Link.
                       sheAdslAtucIntervalLprs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.13.1.7 perfintervalcount read-only
Count of seconds in the interval when there was Loss of Power.
                       sheAdslAtucIntervalESs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.13.1.8 perfintervalcount read-only
Count of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.
                       sheAdslAtucIntervalInits 1.3.6.1.4.1.231.7.1.2.1.6.1.1.13.1.9 perfintervalcount read-only
Count of the line initialization attempts during the interval. Includes both successful and failed attempts.
                       sheAdslAtucIntervalFastR 1.3.6.1.4.1.231.7.1.2.1.6.1.1.13.1.10 gauge32 read-only
This variable indicates Count of seconds in the interval when there was Fast Retrains.
                       sheAdslAtucIntervalFailedFastR 1.3.6.1.4.1.231.7.1.2.1.6.1.1.13.1.11 gauge32 read-only
This variable indicates Count of seconds in the interval when there was Failed Fast Retrains.
                       sheAdslAtucIntervalSesL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.13.1.12 gauge32 read-only
This variable indicates Count of seconds in the interval when there was severely errored seconds.
                       sheAdslAtucIntervalUasL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.13.1.13 gauge32 read-only
This variable indicates Count of seconds in the interval when there was unavailable errored seconds.
             sheAdslAtucChanPerfDataTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14 no-access
This table provides one row for each ATUC channel.
                   sheAdslAtucChanPerfDataEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1 no-access
An entry in adslAtucChanPerfDataTable. This table is only supported by NE releases smaller then R2.5 (NO dualLatency support)!!
                       sheAdslAtucChanPerfDataTimeElapsed 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.1 gauge32 read-only
Total elapsed seconds in this interval.
                       sheAdslAtucChanPerfDataReceivedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.2 counter32 read-only
Count of all encoded blocks received on this channel since agent reset.
                       sheAdslAtucChanPerfDataTransmittedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.3 counter32 read-only
Count of all encoded blocks transmitted on this channel since agent reset.
                       sheAdslAtucChanPerfDataCorrectedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.4 counter32 read-only
Count of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data.
                       sheAdslAtucChanPerfDataUncorrectBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.5 counter32 read-only
Count of all blocks received with uncorrectable errors since agent reset.
                       sheAdslAtucChanPerfDataNcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.6 gauge32 read-only
Count of no cell delineation(ncd) on this channel.
                       sheAdslAtucChanPerfDataOcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.7 gauge32 read-only
Count of out of cell delineation (ocd) on this channel.
                       sheAdslAtucChanPerfDataHec 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.8 gauge32 read-only
Header error check counter(hec) on this channel.
                       sheAdslAtucChanPerfDataValidIntervals 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.9 integer read-only
The number of previous 15-minute intervals in the interval table for which data was collected. Given that is the maximum # of intervals supported. The value will be unless the measurement was (re-)started within the last (*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
                       sheAdslAtucChanPerfDataInvalidIntervals 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.10 integer read-only
The number of intervals in the range from 0 to the value of adslAtucChanPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
                       sheAdslAtucChanPerfDataCurr15MinTimeElapsed 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.11 adslperftimeelapsed read-only
Total elapsed seconds in this interval.
                       sheAdslAtucChanPerfDataCurr15MinReceivedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.12 perfcurrentcount read-only
Count of all encoded blocks received on this channel within the current 15 minute interval.
                       sheAdslAtucChanPerfDataCurr15MinTransmittedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.13 perfcurrentcount read-only
Count of all encoded blocks transmitted on this channel within the current 15 minute interval.
                       sheAdslAtucChanPerfDataCurr15MinCorrectedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.14 perfcurrentcount read-only
Count of all blocks received with errors that were corrected on this channel within the current 15 minute interval.
                       sheAdslAtucChanPerfDataCurr15MinUncorrectBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.15 perfcurrentcount read-only
Count of all blocks received with uncorrectable errors on this channel within the current 15 minute interval.
                       sheAdslAtucChanPerfDataCurr15MinNcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.16 gauge32 read-only
Count of no cell delineation(ncd) on this channel within the current 15 minute time interval.
                       sheAdslAtucChanPerfDataCurr15MinOcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.17 gauge32 read-only
Count of out of cell delineation (ocd) on this channel within the current 15 minute time interval.
                       sheAdslAtucChanPerfDataCurr15MinHec 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.18 gauge32 read-only
Header error check counter(hec) on this channel within the current 15 minute time interval.
                       sheAdslAtucChanPerfDataCurr1DayTimeElapsed 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.19 adslperftimeelapsed read-only
Number of seconds that have elapsed since the beginning of the current 1-day interval.
                       sheAdslAtucChanPerfDataCurr1DayReceivedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.20 adslperfcurrdaycount read-only
Count of all encoded blocks received on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed.
                       sheAdslAtucChanPerfDataCurr1DayTransmittedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.21 adslperfcurrdaycount read-only
Count of all encoded blocks transmitted on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed.
                       sheAdslAtucChanPerfDataCurr1DayCorrectedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.22 adslperfcurrdaycount read-only
Count of all blocks received with errors that were corrected on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed.
                       sheAdslAtucChanPerfDataCurr1DayUncorrectBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.23 adslperfcurrdaycount read-only
Count of all blocks received with uncorrectable errors on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed.
                       sheAdslAtucChanPerfDataCurr1DayNcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.24 gauge32 read-only
Count of no cell delineation (ncd) on this channel within the current 1 day time interval.
                       sheAdslAtucChanPerfDataCurr1DayOcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.25 gauge32 read-only
Count of out of cell delineation (ocd) on this channel within the current 1 day time interval.
                       sheAdslAtucChanPerfDataCurr1DayHec 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.26 gauge32 read-only
Header error check counter (hec) on this channel within the current 1 day time interval.
                       sheAdslAtucChanPerfDataPrev1DayMoniSecs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.27 integer read-only
The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected for any reason.
                       sheAdslAtucChanPerfDataPrev1DayReceivedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.28 adslperfprevdaycount read-only
Count of all encoded blocks received on this channel within the most recent previous 1-day period.
                       sheAdslAtucChanPerfDataPrev1DayTransmittedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.29 adslperfprevdaycount read-only
Count of all encoded blocks transmitted on this channel within the most recent previous 1-day period.
                       sheAdslAtucChanPerfDataPrev1DayCorrectedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.30 adslperfprevdaycount read-only
Count of all blocks received with errors that were corrected on this channel within the most recent previous 1-day period.
                       sheAdslAtucChanPerfDataPrev1DayUncorrectBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.31 adslperfprevdaycount read-only
Count of all blocks received with uncorrectable errors on this channel within the most recent previous 1-day period.
                       sheAdslAtucChanPerfDataPrev1DayNcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.32 gauge32 read-only
Count of no cell delineation (ncd) on this channel within the most recent previous 1-day period.
                       sheAdslAtucChanPerfDataPrev1DayOcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.33 gauge32 read-only
Count of out of cell delineation (ocd) on this channel within the most recent previous 1-day period.
                       sheAdslAtucChanPerfDataPrev1DayHec 1.3.6.1.4.1.231.7.1.2.1.6.1.1.14.1.34 gauge32 read-only
Header error check counter(hec) on this channel within the most recent previous 1-day period.
             sheAdslAtucChanIntervalTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.15 no-access
This table provides one row for each ATUC channel's performance data collection interval.
                   sheAdslAtucChanIntervalEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.15.1 no-access
An entry in the adslAtucIntervalTable. This table is only supported by NE releases smaller then R2.5 (NO dualLatency support)!!
                       sheAdslAtucChanIntervalNumber 1.3.6.1.4.1.231.7.1.2.1.6.1.1.15.1.1 integer read-only
Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional.
                       sheAdslAtucChanIntervalValidData 1.3.6.1.4.1.231.7.1.2.1.6.1.1.15.1.2 truthvalue read-only
This variable indicates if the data for this interval is valid.
                       sheAdslAtucChanIntervalEndTime 1.3.6.1.4.1.231.7.1.2.1.6.1.1.15.1.3 unsigned32 read-only
This variable indicates the time of storing this interval.
                       sheAdslAtucChanIntervalReceivedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.15.1.4 perfintervalcount read-only
Count of all encoded blocks received on this channel during this interval.
                       sheAdslAtucChanIntervalTransmittedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.15.1.5 perfintervalcount read-only
Count of all encoded blocks transmitted on this channel during this interval.
                       sheAdslAtucChanIntervalCorrectedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.15.1.6 perfintervalcount read-only
Count of all blocks received with errors that were corrected on this channel during this interval.
                       sheAdslAtucChanIntervalUncorrectBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.15.1.7 perfintervalcount read-only
Count of all blocks received with uncorrectable errors on this channel during this interval.
                       sheAdslAtucChanIntervalNcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.15.1.8 counter32 read-only
Indicates count of no cell delineation on this channel for this interval.
                       sheAdslAtucChanIntervalOcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.15.1.9 counter32 read-only
Indicates count of out cell delineation on this channel for this interval.
                       sheAdslAtucChanIntervalHec 1.3.6.1.4.1.231.7.1.2.1.6.1.1.15.1.10 counter32 read-only
Indicates Header error check counter on this channel during this interval.
             sheAdslAturPhysTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.16 no-access
This table provides one row for each ATUR Each row contains the Physical Layer Parameters table for that ATUR. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94).
                   sheAdslAturPhysEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.16.1 no-access
An entry in the adslAturPhysTable.
                       sheAdslAturPhysInvSerialNumber 1.3.6.1.4.1.231.7.1.2.1.6.1.1.16.1.1 snmpadminstring read-only
The vendor specific string that identifies the vendor equipment.
                       sheAdslAturPhysInvVendorID 1.3.6.1.4.1.231.7.1.2.1.6.1.1.16.1.2 snmpadminstring read-only
The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters.
                       sheAdslAturPhysInvVersionNumber 1.3.6.1.4.1.231.7.1.2.1.6.1.1.16.1.3 snmpadminstring read-only
The vendor specific version number sent by this ATU as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[10] and expressed as readable characters.
                       sheAdslAturPhysCurrSnrMgn 1.3.6.1.4.1.231.7.1.2.1.6.1.1.16.1.4 integer read-only
Noise Margin as seen by this ATU with respect to its received signal in tenth dB.
                       sheAdslAturPhysCurrAtn 1.3.6.1.4.1.231.7.1.2.1.6.1.1.16.1.5 gauge32 read-only
Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU.
                       sheAdslAturPhysCurrStatus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.16.1.6 sheadsllinecurrentstatustype read-only
Indicates current state of the ATUR line. This is a bit-map of possible conditions. Due to the isolation of the ATUR when line problems occur, many state conditions like loss of power, loss of quality signal, and initialization errors, can not be determined. While trouble shooting ATUR, also use object, adslAtucCurrStatus. The various bit positions are: 0 noDefect There no defects on the line 1 lossOfFraming ATUR failure due to not receiving valid frame 2 lossOfSignal ATUR failure due to not receiving signal 3 lossOfPower ATUR failure due to loss of power 4 lossOfSignalQuality Loss of Signal Quality is declared when the Noise Margin falls below the Minimum Noise Margin, or the bit-error-rate exceeds 10^-7. This is intended to supplement ifOperStatus.
                       sheAdslAturPhysCurrOutputPwr 1.3.6.1.4.1.231.7.1.2.1.6.1.1.16.1.7 integer read-only
Measured total output power transmitted by this ATU. This is the measurement that was reported during the last activation sequence.
                       sheAdslAturPhysCurrAttainableRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.16.1.8 gauge32 read-only
Indicates the maximum currently attainable data rate by the ATU. This value will be equal or greater than the current line rate.
                       sheAdslAturPhysConfig 1.3.6.1.4.1.231.7.1.2.1.6.1.1.16.1.9 octet string read-only
This object provides the upstream and downstream ATU-R configuration data (EOC - read 5 sec after data mode).
                       sheAdslAturPhysDeltHLINSCds 1.3.6.1.4.1.231.7.1.2.1.6.1.1.16.1.10 unsigned32 read-only
DELT-related parameter that provides the scale factor to be applied to the downstream Hlin(f) values. (Not available for ADSL but ADSL2 & ADSL2plus).
                       sheAdslAturPhysDeltHLINpsds 1.3.6.1.4.1.231.7.1.2.1.6.1.1.16.1.11 octet string read-only
DELT-related parameter that provides an array of complex downstream Hlin(f) values in linear scale. Every two octects refer to one element in this array of octets. (Not available for ADSL but ADSL2 & ADSL2plus). This parameter is an array of complex downstream Hlin(f) values in linear scale. Each array entry represents the Hlin(f = i*HLINGds* delta(f)) value for a particular subcarrier group index i, ranging from 0 to MIN(NSCds - 1,511). The Hlin(f) is represented as ((scale/2(exp15))*((a(i) + j*b(i))/2(exp15))), with scale being coded as a 16-bit unsigned integer and, a(i) and b(i) coded as 16-bit 2s complement signed integers in the (-2(exp15) + 1) to (+2(exp15) - 1) range. A special value a(i) = b(i) = -2(exp15) indicates that no measurement could be done for this subcarrier group because it is out of the passband or that the attenuation is out of range to be represented. This parameter is only available after a loop diagnostic procedure.
                       sheAdslAturPhysDeltHLOGMTds 1.3.6.1.4.1.231.7.1.2.1.6.1.1.16.1.12 unsigned32 read-only
DELT-related parameter that provides the number of symbols used to measure the downstream Hlog(f). (Not available for ADSL but ADSL2 & ADSL2plus).
                       sheAdslAturPhysDeltHLOGpsds 1.3.6.1.4.1.231.7.1.2.1.6.1.1.16.1.13 octet string read-only
DELT-related parameter that provides an array of real downstream Hlog(f) values in dB. (Not available for ADSL but ADSL2 & ADSL2plus). This parameter is an array of real downstream Hlog(f) values in dB. Each array entry represents the real Hlog(f = i*HLOGGds* delta(f)) value for a particular subcarrier group sub-carrier index i, ranging from 0 to MIN(NSCds - 1,511). The real Hlog(f) value is represented as (6 - m(i)/10), with m(i) 10-bit unsigned integer in the 0 to 1022 range. A special value m = 1023 indicates that no measurement could be done for this subcarrier group because it is out of the passband or that the attenuation is out of range to be represented.
                       sheAdslAturPhysDeltQLNMTds 1.3.6.1.4.1.231.7.1.2.1.6.1.1.16.1.14 unsigned32 read-only
DELT-related parameter that provides the number of symbols used to measure the downstream QLN(f) values. (Not available for ADSL but ADSL2 & ADSL2plus).
                       sheAdslAturPhysDeltQLNpsds 1.3.6.1.4.1.231.7.1.2.1.6.1.1.16.1.15 octet string read-only
DELT-related parameter that provides an array of real downstream QLN(f) values in dBm/Hz. Every two octects refer to one element in this array of octets. (Not available for ADSL but ADSL2 & ADSL2plus). This parameter is an array of real downstream QLN(f) values in dBm/Hz. Each array entry represents the QLN(f = i*QLNGds* delta(f)) value for a particular subcarrier group index i, ranging from 0 to MIN(NSCds - 1,511). The QLN(f) is represented as (-23 - n(i)/2), with n(i) an 8-bit unsigned integer in the 0 to 254 range. A special value n(i) = 255 indicates that no measurement could be done for this subcarrier group because it is out of the passband or that the noise PSD is out of range to be represented.
                       sheAdslAturPhysCurrentBinBitLoading 1.3.6.1.4.1.231.7.1.2.1.6.1.1.16.1.16 octet string read-only
This parameter represent the current used bit loading per bin in downstream direction. Each octet map to the corresponding bin.
                       sheAdslAturPhysDeltSNRMTds 1.3.6.1.4.1.231.7.1.2.1.6.1.1.16.1.17 unsigned32 read-only
DELT-related parameter that provides the number of symbols used to measure the downstream SNR(f) values. (Not available for ADSL and ADSL2plus) It is represented as a 16-bit unsigned value. After a loop diagnostic procedure, this parameter shall contain the number of symbols used to generate the associate parameter. It should correspond to the value specified in the Recommendation (e.g., the number of symbols in 1 s time interval for G.992.3).
                       sheAdslAturPhysDeltDMTBinSNRds 1.3.6.1.4.1.231.7.1.2.1.6.1.1.16.1.18 octet string read-only
DELT-related parameter that provides an array of real downstream SNR(f) values in dB (Not available for ADSL and ADSL2plus) Each array entry represents the SNR(f = i*f) value for a particular subcarrier index i, ranging from 0 to NSCds C 1. The SNR(f) is represented as (C32 + snr(i)/2), with snr(i) an 8-bit unsigned integer in the 0 to 254 range. A special value snr(i) = 255 indicates that no measurement could be done for the subcarrier because it is out of the passband or that the noise PSD is out of range to be represented.
                       sheAdslAturPhysDeltLastTxState 1.3.6.1.4.1.231.7.1.2.1.6.1.1.16.1.19 sheadslphysaturdeltlasttxstatetype read-only
DELT-related parameter that provides last successful transmitted initialization state by the ATU-R. (Not available for ADSL and ADSL2plus) Initialization states are defined in the individual ADSL Recommendations and are counted from 0 (if G.994.1 is used) or 1 (if G.994.1 is not used) up to Showtime. This parameter must be interpreted along with the ADSL Transmission System. This parameter is available only when, after a failed full initialization, the line diagnostics procedures are activated on the line. Line diagnostics procedures can be activated by the operator of the system (through the Line State Forced line configuration parameter) or autonomously by the ATU-C or ATU-R.
                       sheAdslAturPhysDeltSATNds 1.3.6.1.4.1.231.7.1.2.1.6.1.1.16.1.20 unsigned32 read-only
DELT-related parameter that provides the downtream signal attenuation (length = 4 bytes). (Not available for ADSL and ADSL2plus). This parameter is the measured difference in the total power transmitted by the ATU-C and the total power received by the ATU-R over all subcarriers during showtime. The downstream line attenuation ranges from 0 to +127 dB with 0.1 dB steps. A special value indicates the line attenuation is out of range to be represented. NOTE: During showtime, only a subset of the subcarriers may be transmitted by the ATU-C, as compared to diagnostics mode and initialization. Therefore, the downstream Signal attenuation may be significantly lower than the downstream Line attenuation.
             sheAdslAturChanTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.17 no-access
This table provides one row for each ATUR channel.
                   sheAdslAturChanEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.17.1 no-access
An entry in the adslAturChanTable. This table is only supported by NE releases smaller then R2.5 (NO dualLatency support)!!
                       sheAdslAturChanInterleaveDelay 1.3.6.1.4.1.231.7.1.2.1.6.1.1.17.1.1 gauge32 read-only
Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency. In the case where the ifType is Fast(125), use noSuchObject.
                       sheAdslAturChanCurrTxRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.17.1.2 gauge32 read-only
Actual transmit rate on this channel.
                       sheAdslAturChanPrevTxRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.17.1.3 gauge32 read-only
The rate at the time of the last adslAturRateChangeTrap event. It is also set at initialization to prevent a trap being sent. Rate changes less than adslAturThresh(*)RateDown or less than adslAturThresh(*)RateUp will not cause a trap or cause this object to change. (*) == Fast or Interleave. See AdslLineAlarmConfProfileEntry.
                       sheAdslAturChanCrcBlockLength 1.3.6.1.4.1.231.7.1.2.1.6.1.1.17.1.4 gauge32 read-only
Indicates the length of the channel data-block on which the CRC operates. Refer to Line Code Specific MIBs, [11] and [12] for more information.
                       sheAdslAturChanCurrAtmStatus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.17.1.5 sheadsllineatmstatus read-only
This object indicates an ncd or lcd failure if the counter surpasses 127. If neither ATM counter surpasses 127, the return value will be NoAtmDefect. noAtmDefect(0), noCellDeleniation(1), lossOfCellDeleniation(2)
                       sheAdslAturChanRsSymbols 1.3.6.1.4.1.231.7.1.2.1.6.1.1.17.1.6 unsigned32 read-only
This object indicates number of DMT symbols per Reed- Solomon code word (S) in the upstream direction Note that S is not restricted to interleaved mode only. Even in fast mode, S is a valid constant value and is equal to 1.
                       sheAdslAturChanRsDepth 1.3.6.1.4.1.231.7.1.2.1.6.1.1.17.1.7 unsigned32 read-only
This object indicates interleaving depth (D) in the upstream direction Note that D is not restricted to interleaved mode only. Even in fast mode, D is a valid constant value and is equal to 1.
                       sheAdslAturChanRsRedundancy 1.3.6.1.4.1.231.7.1.2.1.6.1.1.17.1.8 unsigned32 read-only
This object indicates number of redundant bytes (R) per Reed-Solomon code in the upstream direction.
             sheAdslAturPerfDataTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18 no-access
This table provides one row for each ATUR. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94).
                   sheAdslAturPerfDataEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1 no-access
An entry in adslAturPerfDataTable.
                       sheAdslAturPerfDataLofs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.1 counter32 read-only
Count of the number of Loss of Framing failures since agent reset.
                       sheAdslAturPerfDataLoss 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.2 counter32 read-only
Count of the number of Loss of Signal failures since agent reset.
                       sheAdslAturPerfDataLprs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.3 counter32 read-only
Count of the number of Loss of Power failures since agent reset.
                       sheAdslAturPerfDataESs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.4 counter32 read-only
Count of the number of Errored Seconds since agent reset. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.
                       sheAdslAturPerfDataStatSesL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.5 counter32 read-only
The value of this object reports the count of severely errored second-line since the last agent reset.
                       sheAdslAturPerfDataStatUasL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.6 counter32 read-only
The value of this object reports the count of unavailable seconds-line since the last agent reset.
                       sheAdslAturPerfDataValidIntervals 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.7 integer read-only
The number of previous 15-minute intervals in the interval table for which data was collected. Given that is the maximum # of intervals supported. The value will be unless the measurement was (re-)started within the last (*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
                       sheAdslAturPerfDataInvalidIntervals 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.8 integer read-only
The number of intervals in the range from 0 to the value of adslAturPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
                       sheAdslAturPerfDataCurr15MinTimeElapsed 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.9 adslperftimeelapsed read-only
Total elapsed seconds in this interval.
                       sheAdslAturPerfDataCurr15MinLofs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.10 perfcurrentcount read-only
Count of seconds in the current 15 minute interval when there was Loss of Framing.
                       sheAdslAturPerfDataCurr15MinLoss 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.11 perfcurrentcount read-only
Count of seconds in the current 15 minute interval when there was Loss of Signal.
                       sheAdslAturPerfDataCurr15MinLprs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.12 perfcurrentcount read-only
Count of seconds in the current 15 minute interval when there was Loss of Power.
                       sheAdslAturPerfDataCurr15MinESs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.13 perfcurrentcount read-only
Count of Errored Seconds in the current 15 minute interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.
                       sheAdslAturPerfDataCurr15MinSesL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.14 perfcurrentcount read-only
For the current 15-minute interval, adslAturPerfCurr15MinSesL reports the current number of seconds during which there have been severely errored seconds-line.
                       sheAdslAturPerfDataCurr15MinUasL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.15 perfcurrentcount read-only
For the current 15-minute interval, adslAturPerfCurr15MinUasL reports the current number of seconds during which there have been available seconds-line.
                       sheAdslAturPerfDataCurr1DayTimeElapsed 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.16 adslperftimeelapsed read-only
Number of seconds that have elapsed since the beginning of the current 1-day interval.
                       sheAdslAturPerfDataCurr1DayLofs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.17 adslperfcurrdaycount read-only
Count of the number of seconds when there was Loss of Framing during the current day as measured by adslAturPerfCurr1DayTimeElapsed.
                       sheAdslAturPerfDataCurr1DayLoss 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.18 adslperfcurrdaycount read-only
Count of the number of seconds when there was Loss of Signal during the current day as measured by adslAturPerfCurr1DayTimeElapsed.
                       sheAdslAturPerfDataCurr1DayLprs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.19 adslperfcurrdaycount read-only
Count of the number of seconds when there was Loss of Power during the current day as measured by adslAturPerfCurr1DayTimeElapsed.
                       sheAdslAturPerfDataCurr1DayESs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.20 adslperfcurrdaycount read-only
Count of Errored Seconds during the current day as measured by adslAturPerfCurr1DayTimeElapsed. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.
                       sheAdslAturPerfDataCurr1DaySesL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.21 adslperfcurrdaycount read-only
For the current day as measured by adslAturPerfCurr1DayTimeElapsed [RFC2662], adslAturPerfCurr1DaySesL reports the number of seconds during which there have been severely errored seconds-line.
                       sheAdslAturPerfDataCurr1DayUasL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.22 adslperfcurrdaycount read-only
For the current day as measured by adslAturPerfCurr1DayTimeElapsed [RFC2662], adslAturPerfCurr1DayUasL reports the number of seconds during which there have been unavailable seconds-line.
                       sheAdslAturPerfDataPrev1DayMoniSecs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.23 integer read-only
The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected for any reason.
                       sheAdslAturPerfDataPrev1DayLofs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.24 adslperfprevdaycount read-only
Count of seconds in the interval when there was Loss of Framing within the most recent previous 1-day period.
                       sheAdslAturPerfDataPrev1DayLoss 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.25 adslperfprevdaycount read-only
Count of seconds in the interval when there was Loss of Signal within the most recent previous 1-day period.
                       sheAdslAturPerfDataPrev1DayLprs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.26 adslperfprevdaycount read-only
Count of seconds in the interval when there was Loss of Power within the most recent previous 1-day period.
                       sheAdslAturPerfDataPrev1DayESs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.27 adslperfprevdaycount read-only
Count of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.
                       sheAdslAturPerfDataPrev1DaySesL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.28 adslperfprevdaycount read-only
For the previous day, adslAturPerfPrev1DaySesL reports the number of seconds during which there were severely errored seconds-line.
                       sheAdslAturPerfDataPrev1DayUasL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.18.1.29 adslperfprevdaycount read-only
For the previous day, adslAturPerfPrev1DayUasL reports the number of seconds during which there were severely errored seconds-line.
             sheAdslAturIntervalTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.19 no-access
This table provides one row for each ATUR performance data collection interval. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94).
                   sheAdslAturIntervalEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.19.1 no-access
An entry in the adslAturIntervalTable.
                       sheAdslAturIntervalNumber 1.3.6.1.4.1.231.7.1.2.1.6.1.1.19.1.1 integer read-only
Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional.
                       sheAdslAturIntervalValidData 1.3.6.1.4.1.231.7.1.2.1.6.1.1.19.1.2 truthvalue read-only
This variable indicates if the data for this interval is valid.
                       sheAdslAturIntervalEndTime 1.3.6.1.4.1.231.7.1.2.1.6.1.1.19.1.3 unsigned32 read-only
This variable indicates the time of storing this interval.
                       sheAdslAturIntervalLofs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.19.1.4 perfintervalcount read-only
Count of seconds in the interval when there was Loss of Framing.
                       sheAdslAturIntervalLoss 1.3.6.1.4.1.231.7.1.2.1.6.1.1.19.1.5 perfintervalcount read-only
Count of seconds in the interval when there was Loss of Signal.
                       sheAdslAturIntervalLprs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.19.1.6 perfintervalcount read-only
Count of seconds in the interval when there was Loss of Power.
                       sheAdslAturIntervalESs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.19.1.7 perfintervalcount read-only
Count of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more los or sef defects.
                       sheAdslAturIntervalSesL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.19.1.8 perfintervalcount read-only
For the each interval, adslAturIntervalSesL reports the number of seconds during which there have been severely errored seconds-line.
                       sheAdslAturIntervalUasL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.19.1.9 perfintervalcount read-only
For the each interval, adslAturIntervalUasL reports the number of seconds during which there have been unavailable seconds-line.
             sheAdslAturChanPerfDataTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20 no-access
This table provides one row for each ATUR channel.
                   sheAdslAturChanPerfDataEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1 no-access
An entry in adslAturChanPerfDataTable. This table is only supported by NE releases smaller then R2.5 (NO dualLatency support)!!
                       sheAdslAturChanPerfDataReceivedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.1 counter32 read-only
Count of all encoded blocks received on this channel since agent reset.
                       sheAdslAturChanPerfDataTransmittedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.2 counter32 read-only
Count of all encoded blocks transmitted on this channel since agent reset.
                       sheAdslAturChanPerfDataCorrectedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.3 counter32 read-only
Count of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data.
                       sheAdslAturChanPerfDataUncorrectBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.4 counter32 read-only
Count of all blocks received with uncorrectable errors since agent reset.
                       sheAdslAturChanPerfDataExtnNcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.5 gauge32 read-only
Number of packets with no cell delineation(NCD) error on this channel.
                       sheAdslAturChanPerfDataExtnHec 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.6 gauge32 read-only
Number of packets with Header error check (HEC) error on this channel.
                       sheAdslAturChanPerfDataPerfValidIntervals 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.7 integer read-only
The number of previous 15-minute intervals in the interval table for which data was collected. Given that is the maximum # of intervals supported. The value will be unless the measurement was (re-)started within the last (*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
                       sheAdslAturChanPerfDataPerfInvalidIntervals 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.8 integer read-only
The number of intervals in the range from 0 to the value of adslAturChanPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
                       sheAdslAturChanPerfDataCurr15MinTimeElapsed 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.9 adslperftimeelapsed read-only
Total elapsed seconds in this interval. A full interval is 900 seconds.
                       sheAdslAturChanPerfDataCurr15MinReceivedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.10 perfcurrentcount read-only
Count of all encoded blocks received on this channel within the current 15 minute interval.
                       sheAdslAturChanPerfDataCurr15MinTransmittedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.11 perfcurrentcount read-only
Count of all encoded blocks transmitted on this channel within the current 15 minute interval.
                       sheAdslAturChanPerfDataCurr15MinCorrectedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.12 perfcurrentcount read-only
Count of all blocks received with errors that were corrected on this channel within the current 15 minute interval.
                       sheAdslAturChanPerfDataCurr15MinUncorrectBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.13 perfcurrentcount read-only
Count of all blocks received with uncorrectable errors on this channel within the current 15 minute interval.
                       sheAdslAturChanPerfDataExtnCurr15MinNcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.14 gauge32 read-only
Number of packets with no cell delineation(NCD) error on this channel within the current 15 minute time interval.
                       sheAdslAturChanPerfDataExtnCurr15MinHec 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.15 gauge32 read-only
Number of packets with Header error check (HEC) error on this channel within the current 15 minute time interval.
                       sheAdslAturChanPerfDataCurr1DayTimeElapsed 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.16 adslperftimeelapsed read-only
Number of seconds that have elapsed since the beginning of the current 1-day interval.
                       sheAdslAturChanPerfDataCurr1DayReceivedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.17 adslperfcurrdaycount read-only
Count of all encoded blocks received on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed.
                       sheAdslAturChanPerfDataCurr1DayTransmittedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.18 adslperfcurrdaycount read-only
Count of all encoded blocks transmitted on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed.
                       sheAdslAturChanPerfDataCurr1DayCorrectedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.19 adslperfcurrdaycount read-only
Count of all blocks received with errors that were corrected on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed.
                       sheAdslAturChanPerfDataCurr1DayUncorrectBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.20 adslperfcurrdaycount read-only
Count of all blocks received with uncorrectable errors on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed.
                       sheAdslAturChanPerfDataExtnCurr1DayNcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.21 gauge32 read-only
Number of packets with no cell delineation (NCD) error on this channel within the current 1 day time interval.
                       sheAdslAturChanPerfDataExtnCurr1DayHec 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.22 gauge32 read-only
Number of packets with Header error check (HEC) error on this channel within the current 1 day time interval.
                       sheAdslAturChanPerfDataPrev1DayMoniSecs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.23 integer read-only
The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected for any reason.
                       sheAdslAturChanPerfDataPrev1DayReceivedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.24 adslperfprevdaycount read-only
Count of all encoded blocks received on this channel within the most recent previous 1-day period.
                       sheAdslAturChanPerfDataPrev1DayTransmittedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.25 adslperfprevdaycount read-only
Count of all encoded blocks transmitted on this channel within the most recent previous 1-day period.
                       sheAdslAturChanPerfDataPrev1DayCorrectedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.26 adslperfprevdaycount read-only
Count of all blocks received with errors that were corrected on this channel within the most recent previous 1-day period.
                       sheAdslAturChanPerfDataPrev1DayUncorrectBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.27 adslperfprevdaycount read-only
Count of all blocks received with uncorrectable errors on this channel within the most recent previous 1-day period.
                       sheAdslAturChanPerfDataExtnPrev1DayNcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.28 gauge32 read-only
Number of packets with no cell delineation (NCD) error on this channel within the most recent previous period.
                       sheAdslAturChanPerfDataExtnPrev1DayHec 1.3.6.1.4.1.231.7.1.2.1.6.1.1.20.1.29 gauge32 read-only
Number of packets with Header error check (HEC) error on this channel within the most recent previous period.
             sheAdslAturChanIntervalTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.21 no-access
This table provides one row for each ATUR channel's performance data collection interval.
                   sheAdslAturChanIntervalEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.21.1 no-access
An entry in the adslAturIntervalTable. This table is only supported by NE releases smaller then R2.5 (NO dualLatency support)!!
                       sheAdslAturChanIntervalNumber 1.3.6.1.4.1.231.7.1.2.1.6.1.1.21.1.1 integer read-only
Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional.
                       sheAdslAturChanIntervalValidData 1.3.6.1.4.1.231.7.1.2.1.6.1.1.21.1.2 truthvalue read-only
This variable indicates if the data for this interval is valid.
                       sheAdslAturChanIntervalEndTime 1.3.6.1.4.1.231.7.1.2.1.6.1.1.21.1.3 unsigned32 read-only
This variable indicates the time of storing this interval.
                       sheAdslAturChanIntervalReceivedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.21.1.4 perfintervalcount read-only
Count of all encoded blocks received on this channel during this interval.
                       sheAdslAturChanIntervalTransmittedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.21.1.5 perfintervalcount read-only
Count of all encoded blocks transmitted on this channel during this interval.
                       sheAdslAturChanIntervalCorrectedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.21.1.6 perfintervalcount read-only
Count of all blocks received with errors that were corrected on this channel during this interval.
                       sheAdslAturChanIntervalUncorrectBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.21.1.7 perfintervalcount read-only
Count of all blocks received with uncorrectable errors on this channel during this interval.
                       sheAdslAturChanIntervalNcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.21.1.8 gauge32 read-only
Indicates count of no cell delineation on this channel for this interval.
                       sheAdslAturChanIntervalHec 1.3.6.1.4.1.231.7.1.2.1.6.1.1.21.1.9 gauge32 read-only
Indicates Header error check counter on this channel during this interval.
             sheAdslLineAlarmConfProfileTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22 no-access
This table contains information on the ADSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure the modem for a physical line
                   sheAdslLineAlarmConfProfileEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1 no-access
Each entry consists of a list of parameters that represents the configuration of an ADSL modem. 'Dynamic' profiles are implemented. A default profile will always exist. This profile's name will be set to `DEFVAL' and its parameters will be set to vendor specific values, unless otherwise specified in this document.
                       sheAdslLineAlarmConfProfileIndex 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.1 integer32 read-only
Tableindex.
                       sheAdslLineAlarmConfProfileName 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.2 snmpadminstring read-only
This object is used by the line alarm configuration table in order to identify a row of this table. Dynamic profiles are implemented. The profile name is user specified. The system will always provide a default profile whose name is `DEFVAL'. This characters are not allowed: space : ? leading numbers
                       sheAdslLineAlarmConfProfileOpStateTrapEnable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.3 truthvalue read-only
Enables and disables the OpStateChangeTrap.
                       sheAdslLineAlarmConfProfileAtucThreshFastRateUp 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.4 unsigned32 read-only
Applies to `Fast' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value of this object. A value of `0' will disable the trap.
                       sheAdslLineAlarmConfProfileAtucThreshInterleaveRateUp 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.5 unsigned32 read-only
Applies to `Interleave' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value of this object. A value of `0' will disable the trap.
                       sheAdslLineAlarmConfProfileAtucThreshFastRateDown 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.6 unsigned32 read-only
Applies to `Fast' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate minus the value of this object. A value of `0' will disable the trap.
                       sheAdslLineAlarmConfProfileAtucThreshInterleaveRateDown 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.7 unsigned32 read-only
Applies to `Interleave' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when:ChanCurrTxRate <= ChanPrevTxRate minus the value of this object. A value of `0' will disable the trap.
                       sheAdslLineAlarmConfProfileAtucInitFailureTrapEnable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.8 truthvalue read-only
Enables and disables the InitFailureTrap. This object is defaulted disable(2).
                       sheAdslLineAlarmConfProfileAtucThresh15MinLofs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.9 integer read-only
The number of Loss of Frame Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLofsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
                       sheAdslLineAlarmConfProfileAtucThresh15MinLoss 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.10 integer read-only
The number of Loss of Signal Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLossThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
                       sheAdslLineAlarmConfProfileAtucThresh15MinLols 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.11 integer read-only
The number of Loss of Link Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLolsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
                       sheAdslLineAlarmConfProfileAtucThresh15MinLprs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.12 integer read-only
The number of Loss of Power Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLprsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
                       sheAdslLineAlarmConfProfileAtucThresh15MinESs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.13 integer read-only
The number of Errored Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfESsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
                       sheAdslLineAlarmConfProfileAtucThresh15MinSesL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.14 integer read-only
The number of Severe errored seconds encountered by an ADSL interface within any giving 15 minutes performance data collection period, which cause the SNMP agend to send an adslAtucPerfSesLTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
                       sheAdslLineAlarmConfProfileAtucThresh15MinUasL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.15 integer read-only
The number of Unavailable seconds encountered by an ADSL interface within any giving 15 minutes performance data collection period, which cause the SNMP agend to send an adslAtucPerfUasLTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
                       sheAdslLineAlarmConfProfileAtucThresh15MinFailFastR 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.16 integer read-only
The number of failed retrains encountered by an ADSL interface within any giving 15 minutes performance data collection period, which cause the SNMP agent to send an adslAtucFailedFastRTrap. Not supported yet!
                       sheAdslLineAlarmConfProfileAturThreshFastRateUp 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.17 unsigned32 read-only
Applies to `Fast' channels only. Configured change in rate causing an adslAturRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value of this object. A value of `0' will disable the trap.
                       sheAdslLineAlarmConfProfileAturThreshInterleaveRateUp 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.18 unsigned32 read-only
Applies to `Interleave' channels only. Configured change in rate causing an adslAturRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value of this object. A value of `0' will disable the trap.
                       sheAdslLineAlarmConfProfileAturThreshFastRateDown 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.19 unsigned32 read-only
Applies to `Fast' channels only. Configured change in rate causing an adslAturRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate minus the value of this object. A value of `0' will disable the trap.
                       sheAdslLineAlarmConfProfileAturThreshInterleaveRateDown 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.20 unsigned32 read-only
Applies to `Interleave' channels only. Configured change in rate causing an adslAturRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate minus the value of this object. A value of `0' will disable the trap.
                       sheAdslLineAlarmConfProfileAturThresh15MinLofs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.21 integer read-only
The number of Loss of Frame Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfLofsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
                       sheAdslLineAlarmConfProfileAturThresh15MinLoss 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.22 integer read-only
The number of Loss of Signal Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfLossThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
                       sheAdslLineAlarmConfProfileAturThresh15MinLprs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.23 integer read-only
The number of Loss of Power Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfLprsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
                       sheAdslLineAlarmConfProfileAturThresh15MinESs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.24 integer read-only
The number of Errored Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfESsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
                       sheAdslLineAlarmConfProfileAturThresh15MinSesL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.25 integer read-only
The number of Severe errored seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfSesLThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
                       sheAdslLineAlarmConfProfileAturThresh15MinUasL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.22.1.26 integer read-only
The number of Unavailable seconds encountered by an ADSL interface within any giving 15 minutes performance data collection period, which cause the SNMP agend to send an adslAturPerfUasLTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
             sheAdslLineAlarmConfProfileControl 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23
                   sheAdslLineAlarmConfProfileControlRequest 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.1 sheadslcontrolrequesttype read-write
createAdslLineAlarmConfProfile: sheAdslLineAlarmConfProfileControlName ... modifyAdslLineAlarmConfProfile: sheAdslLineAlarmConfProfileControlIndex sheAdslLineAlarmConfProfileControlName ... deleteAdslLineAlarmConfProfile: sheAdslLineAlarmConfProfileControlIndex sheAdslLineAlarmConfProfileControlName
                   sheAdslLineAlarmConfProfileControlIndex 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.2 integer32 read-write
Index of the table entry to be configured. Needed for modify or delete.
                   sheAdslLineAlarmConfProfileControlStatus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.3 shecontrolstatustype read-only
The status of a user command.
                   sheAdslLineAlarmConfProfileControlTimer 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.4 gauge32 read-only
The maximum wait time for the manager for a long running user command.
                   sheAdslLineAlarmConfProfileControlReqResult 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.5 sheadslcontrolrequestresulttype read-only
The result of the last user command.
                   sheAdslLineAlarmConfProfileControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.6 unsigned32 read-only
The time stamp of the last command (end of command).
                   sheAdslLineAlarmConfProfileControlName 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.7 snmpadminstring read-write
Descriptional name.
                   sheAdslLineAlarmConfProfileControlOpStateTrapEnable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.8 truthvalue read-write
Enables and disables the LineStateTrap.
                   sheAdslLineAlarmConfProfileControlAtucThreshFastRateUp 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.9 unsigned32 read-write
Applies to `Fast' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value of this object. A value of `0' will disable the trap.
                   sheAdslLineAlarmConfProfileControlAtucThreshInterleaveRateUp 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.10 unsigned32 read-write
Applies to `Interleave' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value of this object. A value of `0' will disable the trap.
                   sheAdslLineAlarmConfProfileControlAtucThreshFastRateDown 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.11 unsigned32 read-write
Applies to `Fast' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate minus the value of this object. A value of `0' will disable the trap.
                   sheAdslLineAlarmConfProfileControlAtucThreshInterleaveRateDown 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.12 unsigned32 read-write
Applies to `Interleave' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate minus the value of this object. A value of `0' will disable the trap.
                   sheAdslLineAlarmConfProfileControlAtucInitFailureTrapEnable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.13 truthvalue read-write
Enables and disables the InitFailureTrap. This object is defaulted disable(2).
                   sheAdslLineAlarmConfProfileControlAtucThresh15MinLofs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.14 integer read-write
The number of Loss of Frame Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLofsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
                   sheAdslLineAlarmConfProfileControlAtucThresh15MinLoss 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.15 integer read-write
The number of Loss of Signal Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLossThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
                   sheAdslLineAlarmConfProfileControlAtucThresh15MinLols 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.16 integer read-write
The number of Loss of Link Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLolsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
                   sheAdslLineAlarmConfProfileControlAtucThresh15MinLprs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.17 integer read-write
The number of Loss of Power Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfLprsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
                   sheAdslLineAlarmConfProfileControlAtucThresh15MinESs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.18 integer read-write
The number of Errored Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfESsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
                   sheAdslLineAlarmConfProfileControlAtucThresh15MinSesL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.19 integer read-write
The number of Errored Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfSesLThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
                   sheAdslLineAlarmConfProfileControlAtucThresh15MinUasL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.20 integer read-write
The number of Errored Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAtucPerfUasLThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
                   sheAdslLineAlarmConfProfileControlAtucThresh15MinFailFastR 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.21 integer read-write
The number of failed retrains encountered by an ADSL interface within any giving 15 minutes performance data collection period, which cause the SNMP agent to send an adslAtucFailedFastRTrap.
                   sheAdslLineAlarmConfProfileControlAturThreshFastRateUp 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.22 unsigned32 read-write
Applies to `Fast' channels only. Configured change in rate causing an adslAturRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value of this object. A value of `0' will disable the trap.
                   sheAdslLineAlarmConfProfileControlAturThreshInterleaveRateUp 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.23 unsigned32 read-write
Applies to `Interleave' channels only. configured change in rate causing an adslAturRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus the value of this object. A value of `0' will disable the trap.
                   sheAdslLineAlarmConfProfileControlAturThreshFastRateDown 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.24 unsigned32 read-write
Applies to `Fast' channels only. Configured change in rate causing an adslAturRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate minus the value of this object. A value of `0' will disable the trap.
                   sheAdslLineAlarmConfProfileControlAturThreshInterleaveRateDown 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.25 unsigned32 read-write
Applies to `Interleave' channels only. Configured change in rate causing an adslAturRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate minus the value of this object. A value of `0' will disable the trap.
                   sheAdslLineAlarmConfProfileControlAturThresh15MinLofs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.26 integer read-write
The number of Loss of Frame Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfLofsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
                   sheAdslLineAlarmConfProfileControlAturThresh15MinLoss 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.27 integer read-write
The number of Loss of Signal Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfLossThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
                   sheAdslLineAlarmConfProfileControlAturThresh15MinLprs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.28 integer read-write
The number of Loss of Power Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfLprsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
                   sheAdslLineAlarmConfProfileControlAturThresh15MinESs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.29 integer read-write
The number of Errored Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfESsThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
                   sheAdslLineAlarmConfProfileControlAturThresh15MinSesL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.30 integer read-write
The number of Errored Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfSesLThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
                   sheAdslLineAlarmConfProfileControlAturThresh15MinUasL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.23.31 integer read-write
The number of Errored Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to send an adslAturPerfUasLThreshTrap. One trap will be sent per interval per interface. A value of `0' will disable the trap.
             sheAdslNotifications 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24
                   sheAdslAtucTraps 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.1
                       sheAdslAtucPerfLofsThreshTrap 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.1.1
Loss of Framing 15-minute interval threshold reached.
                       sheAdslAtucPerfLossThreshTrap 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.1.2
Loss of Signal 15-minute interval threshold reached.
                       sheAdslAtucPerfLolsThreshTrap 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.1.3
Loss of Link 15-minute interval threshold reached.
                       sheAdslAtucPerfLprsThreshTrap 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.1.4
Loss of Power 15-minute interval threshold reached.
                       sheAdslAtucPerfESsThreshTrap 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.1.5
Errored Second 15-minute interval threshold reached.
                       sheAdslAtucRateChangeTrap 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.1.6
The ATUCs transmit rate has changed (RADSL mode only)
                       sheAdslAtucStatusTrap 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.1.7
ATUC initialization failed. See sheAdslAtucPhysCurrStatus for potential reasons.
                       sheAdslAtucFailedFastRThreshTrap 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.1.8
Failed Fast Retrains 15-minute threshold reached.
                       sheAdslAtucPerfSesLThreshTrap 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.1.9
Severely errored seconds-line 15-minute threshold reached.
                       sheAdslAtucPerfUasLThreshTrap 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.1.10
Unavailable seconds-line 15-minute threshold reached.
                       sheAdslLineStateTrap 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.1.11
The operational line state was changed. This trap will be enabled/disabled over the value of sheLineAlarmConfProfileOpStateTrapEnable.
                       sheAdslAtucPerfLol 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.1.12
This alarm informs the link between the line card and modem is disconnected for unidentied reason, not dying gasp.
                       sheAdslAtucPerfLpr 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.1.13
This alarm informs the link between the line card and modem is disconnected for dying gasp.
                       sheAdslAtucPerfLos 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.1.14
An LOS failure is declared after 2.5 +(-) 0.5 s of contiguous LOS defect, or, if LOS defect is present when the criteria for LOF failure declaration have been met (see LOF definition below). A LOS failure is cleared after 10 +(-) 0.5 s of no LOS defect.
                       sheAdslAtucPerfLof 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.1.15
An LOF failure is declared after 2.5 +(-) 0.5 s of contiguous SEF defect, except when an LOS defect or failure is present (see LOS definition above). A LOF failure is cleared when LOS failure is declared, or after 10 +(-) 0.5 s of no SEF defect.
                       sheAdslLineActStateTrap 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.1.16
The line activation command was sent to Line card system
                       sheAdslInitFailTrap 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.1.17
The init fail trap, trap will only send if a initialication was detected. This trap could be enabled/disabled over the value of sheLineAlarmConfProfileInitFailTrapEnable.
                   sheAdslAturTraps 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.2
                       sheAdslAturRateChangeTrap 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.2.1
The ATURs transmit rate has changed (RADSL mode only)
                       sheAdslAturPerfLofsThreshTrap 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.2.2
Loss of Framing 15-minute interval threshold reached.
                       sheAdslAturPerfLossThreshTrap 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.2.3
Loss of Signal 15-minute interval threshold reached.
                       sheAdslAturPerfLprsThreshTrap 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.2.4
Loss of Power 15-minute interval threshold reached.
                       sheAdslAturPerfESsThreshTrap 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.2.5
Errored Second 15-minute interval threshold reached.
                       sheAdslAturPerfSesLThreshTrap 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.2.6
Severely errored seconds-line 15-minute threshold reached.
                       sheAdslAturPerfUasLThreshTrap 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.2.7
Unavailable seconds-line 15-minute threshold reached.
                       sheAdslAturStatusTrap 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.2.8
ATUC initialization failed. See sheAdslAtucPhysCurrStatus for potential reasons.
                       sheAdslAturPerfLos 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.2.9
An LOS failure is declared after 2.5 +(-) 0.5 s of contiguous LOS defect, or, if LOS defect is present when the criteria for LOF failure declaration have been met (see LOF definition below). A LOS failure is cleared after 10 +(-) 0.5 s of no LOS defect..
                       sheAdslAturPerfLof 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.2.10
An LOF failure is declared after 2.5 +(-) 0.5 s of contiguous SEF defect, except when an LOS defect or failure is present (see LOS definition above). A LOF failure is cleared when LOS failure is declared, or after 10 +(-) 0.5 s of no SEF defect.
                   sheAdslConfigurationTraps 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.3
                       sheAdslLineConfProfileCreated 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.3.2
Configuration notification.
                       sheAdslLineConfProfileModified 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.3.3
Configuration notification.
                       sheAdslLineConfProfileDeleted 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.3.4
Configuration notification.
                       sheAdslLineConfExtnProfileModified 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.3.6
Configuration notification.
                       sheAdslLineAlarmConfProfileCreated 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.3.8
Configuration notification.
                       sheAdslLineAlarmConfProfileModified 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.3.9
Configuration notification.
                       sheAdslLineAlarmConfProfileDeleted 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.3.10
Configuration notification.
                       sheAdslLineConfigurationModified 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.3.11
Configuration notification.
                       sheAdslLinePerfCounterCleared 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.3.12
performance counter cleared
                       sheAdslLineConfProfileReqResult 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.3.13
Configuration notification for long running command - Result-Trap.
                       sheAdslLineConfExtnProfileReqResult 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.3.14
Configuration notification for long running command - Result-Trap.
                       sheAdslLineAlarmConfProfileReqResult 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.3.15
Configuration notification for long running command - Result-Trap.
                       sheAdslLineDpboProfileCreated 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.3.16
Configuration notification.
                       sheAdslLineDpboProfileModified 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.3.17
Configuration notification.
                       sheAdslLineDpboProfileDeleted 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.3.18
Configuration notification.
                       sheAdslLineDpboProfileReqResult 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.3.19
Configuration notification for long running command - Result-Trap.
                       sheAdslLineDpboProfileSetReqResult 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.3.20
Configuration notification for long running command - Result-Trap.
                       sheAdslLineDpboProfileSetModified 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.3.21
Configuration notification.
                       sheAdslLineInpValueTruncatedInto2 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.3.22
INP value was truncated into 2 because of the limitation of Conexant.
                   sheAdslLineAlarmTraps 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.4
                       sheAdslLineAlarmLOS 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.4.1
ATUC failure due to not receiving signal
                       sheAdslLineAlarmLOF 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.4.2
ATUC failure due to not receiving valid frame.
                       sheAdslLineAlarmLOL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.4.3
ATUC failure due to inability to link with xTUR
                       sheAdslLineAlarmLPR 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.4.4
ATUR failure due to loss of power
                       sheAdslLineAlarmIMNR 1.3.6.1.4.1.231.7.1.2.1.6.1.1.24.4.5
Loss of Signal Quality is declared when the Noise Margin falls below the Minimum Noise Margin, or the bit-error-rate exceeds 10^-7. Detected by Atuc-side.
             sheAdslVccTpTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.25 no-access
The VccTp-Table.
                   sheAdslVccTpEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.25.1 no-access
This table contains the VccTp-Configurations. There will be one entry for every adsl-interface available per default. This default entry should never be deleted.
                       sheAdslVccTpIndex 1.3.6.1.4.1.231.7.1.2.1.6.1.1.25.1.1 integer32 read-only
Index for that table. The index will follow this rule: VccTpIndex = (VccTpSubLayerIndex << 4) + VccTpNumber
                       sheAdslVccTpSubLayerIndex 1.3.6.1.4.1.231.7.1.2.1.6.1.1.25.1.2 interfaceindex read-only
ifIndex of the underlaying adsl-interface.
                       sheAdslVccTpNumber 1.3.6.1.4.1.231.7.1.2.1.6.1.1.25.1.3 integer32 read-only
This is the logical number of VccTP on the corresponding interface. Maximum value is 8.
                       sheAdslVccTpVpi 1.3.6.1.4.1.231.7.1.2.1.6.1.1.25.1.4 integer32 read-only
The VPI - Value.
                       sheAdslVccTpVci 1.3.6.1.4.1.231.7.1.2.1.6.1.1.25.1.5 integer32 read-only
The Vci - Value.
                       sheAdslVccTpOamLevel 1.3.6.1.4.1.231.7.1.2.1.6.1.1.25.1.6 sheadsloamleveltype read-only
The OAM level for loop test on VP/VC level. Valid: f5 (for VC).
                       sheAdslVccTpLoopTest 1.3.6.1.4.1.231.7.1.2.1.6.1.1.25.1.7 sheadsloamlooptesttype read-only
The type of loop test . For EndToEnd loop test loop location ID is FF..FF.
                       sheAdslVccTpLoopTestResult 1.3.6.1.4.1.231.7.1.2.1.6.1.1.25.1.8 sheadslvcctplooptestresulttype read-only
Possible values: segSuccess(0), segFailure(1), endToEndSuccess(2), endToEndFailure(3), aborted(4), progress(5), notAvailable(65535)
                       sheAdslVccTpLoopLocId 1.3.6.1.4.1.231.7.1.2.1.6.1.1.25.1.9 octet string read-only
Test cell loopback location. It is an identifier known by the crafts person identifying a ATM node in the ATM network. For EndToEnd loop test the default value is valid.
                       sheAdslVccTpAlarmSeverityIndex 1.3.6.1.4.1.231.7.1.2.1.6.1.1.25.1.10 shealarmsevprofileindex read-only
Index to the AlarmSeverityProfileTable. Defines the actual AlarmSeverities for all alarms per VccTp.
                       sheAdslVccTpEgressQosClass 1.3.6.1.4.1.231.7.1.2.1.6.1.1.25.1.11 sheadslatmqostype read-only
Egress Qos Type
                       sheAdslVccTpEgressPeakCellRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.25.1.12 unsigned32 read-only
Valid when sheAdslVccTpEgressQosClass is not unshaped
                       sheAdslVccTpEgressSustainedCellRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.25.1.13 unsigned32 read-only
Valid when sheAdslVccTpEgressQosClass is shapingRtVbr or shapingNrtVbr
                       sheAdslVccTpEgressMaxBurstSize 1.3.6.1.4.1.231.7.1.2.1.6.1.1.25.1.14 unsigned32 read-only
Valid when sheAdslVccTpEgressQosClass is shapingRtVbr or shapingNrtVbr
                       sheAdslVccTpEgressWeight 1.3.6.1.4.1.231.7.1.2.1.6.1.1.25.1.15 integer32 read-only
Valid only when sheAdslVccTpEgressQosClass is unshaped.
                       sheAdslVccTpIngressSustainedCellRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.25.1.16 unsigned32 read-only
GFR scr for ingress policing
                       sheAdslVccTpIngressMaxBurstSize 1.3.6.1.4.1.231.7.1.2.1.6.1.1.25.1.17 unsigned32 read-only
GFR mbs for ingress policing
                       sheAdslVccTpAdminState 1.3.6.1.4.1.231.7.1.2.1.6.1.1.25.1.18 sheadslenabletype read-only
Enable/disable single VccTp. Default value is enabled.
                       sheAdslVccTpOrl 1.3.6.1.4.1.231.7.1.2.1.6.1.1.25.1.19 unsigned32 read-only
The output rate limiting value. This value is only valid for the default VccTp-entry's with VccTp-Number 1. All other will show a 0 and could not be modified.
                       sheAdslVccTpUsedDslChannel 1.3.6.1.4.1.231.7.1.2.1.6.1.1.25.1.20 sheadslconflinetype read-only
This attribute defines the usage of a dsl bearer channel by this VccTp. The availability of dsl channels depends on the configuration of the underlaying adsl line (VccTpSublayerIndex points to this line). Valid values for configuration: fastOnly(2) - only in dualLatency mode available interleavedOnly(3) - only in dualLatency mode available If singleLatency mode is used on the underlaying dslInterface, the port will select the available channel for all existing VccTP's automaticaly. Note: Depending on the used AdslLineProfile configuration, the following scenarios are possible: 1. default state: ->line uses interleaved channel only ->VccTp's uses always the available channel. ->A modification of sheAdslVccTpUsedDslChannel will be rejected! 2. modify line profile ->line uses fast channel only ->VccTp's uses always the available channel. ->CXU send notifications. ->A modification of sheAdslVccTpUsedDslChannel will be rejected! 3. modify line profile ->line uses dualLatency ->VccTp's uses the same channel as before. 4. modify VccTp entry ->line uses dualLatency ->the slected VccTp uses fast or interleaved channel only according to the configuration. ->A setting of value fastOrInterleaved(4) will be rejected. 5. modify line profile ->line goes back to use interleaved channel only ->VccTp's uses the interleaved channel ->notification will be send if a change is needed.
                       sheAdslVccTpEncapsulation 1.3.6.1.4.1.231.7.1.2.1.6.1.1.25.1.21 sheadslatmencaptype read-only
Used encapsulation type over AAL5 for this VccTp.
             sheAdslVccTpControl 1.3.6.1.4.1.231.7.1.2.1.6.1.1.26
                   sheAdslVccTpControlRequest 1.3.6.1.4.1.231.7.1.2.1.6.1.1.26.1 sheadslcontrolrequesttype read-write
createAdslVccTp: sheAdslVccTpControlSubLayerIndex sheAdslVccTpControlVpi sheAdslVccTpControlVci deleteAdslVccTp: sheAdslVccTpControlIndex modifyAdslVccTp: sheAdslVccTpControlIndex sheAdslVccTpControlVpi sheAdslVccTpControlVci sheAdslVccTpControlAlarmSeverityIndex modifyAdslVccTpLoopTest: sheAdslVccTpControlIndex sheAdslVccTpControlLoopTest modifyAdslVccTpEgressShaping: sheAdslVccTpControlIndex sheAdslVccTpControlEgressQosClass sheAdslVccTpControlEgressPeakCellRate sheAdslVccTpControlEgressSustainedCellRate sheAdslVccTpControlEgressMaxBurstSize sheAdslVccTpControlEgressWeight modifyAdslVccTpIngressPolicing: sheAdslVccTpControlIndex sheAdslVccTpControlIngressSustainedCellRate sheAdslVccTpControlIngressMaxBurstSize modifyAdslVccTpAdminState: sheAdslVccTpControlIndex sheAdslVccTpControlAdminState modifyAdslVccTpOrl: sheAdslVccTpControlIndex sheAdslVccTpControlOrl Only in dualLatency mode possible!! modifyAdslVccTpUsedDslChannel: sheAdslVccTpControlIndex sheAdslVccTpControlUsedDslChannel ## New for R2.6 deleteAdslVccTpPerformanceCounters: sheAdslVccTpControlIndex modifyAdslVccTpEncap: sheAdslVccTpControlIndex sheAdslVccTpControlEncapsulation
                   sheAdslVccTpControlIndex 1.3.6.1.4.1.231.7.1.2.1.6.1.1.26.2 integer32 read-write
Index of the Table-entry to be configured.
                   sheAdslVccTpControlStatus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.26.3 shecontrolstatustype read-only
The status of a user command.
                   sheAdslVccTpControlTimer 1.3.6.1.4.1.231.7.1.2.1.6.1.1.26.4 gauge32 read-only
The maximum wait time for the manager for a long running user command.
                   sheAdslVccTpControlReqResult 1.3.6.1.4.1.231.7.1.2.1.6.1.1.26.5 sheadslcontrolrequestresulttype read-only
The result of the last user command.
                   sheAdslVccTpControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.6.1.1.26.6 unsigned32 read-only
The time stamp of the last command (end of command).
                   sheAdslVccTpControlSubLayerIndex 1.3.6.1.4.1.231.7.1.2.1.6.1.1.26.7 interfaceindex read-write
Description.
                   sheAdslVccTpControlVpi 1.3.6.1.4.1.231.7.1.2.1.6.1.1.26.9 integer32 read-write
Vpi
                   sheAdslVccTpControlVci 1.3.6.1.4.1.231.7.1.2.1.6.1.1.26.10 integer32 read-write
Vci
                   sheAdslVccTpControlLoopTest 1.3.6.1.4.1.231.7.1.2.1.6.1.1.26.11 sheadsloamlooptesttype read-write
Actual LoopTest-Value. Only None or endToEnd will be accepted.
                   sheAdslVccTpControlAlarmSeverityIndex 1.3.6.1.4.1.231.7.1.2.1.6.1.1.26.12 shealarmsevprofileindex read-write
Index of the used AlarmSeverityProfile.
                   sheAdslVccTpControlEgressQosClass 1.3.6.1.4.1.231.7.1.2.1.6.1.1.26.13 sheadslatmqostype read-write
Egress QoS Type.
                   sheAdslVccTpControlEgressPeakCellRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.26.14 unsigned32 read-write
Valid when sheAdslVccTpEgressQosClass is not unshaped
                   sheAdslVccTpControlEgressSustainedCellRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.26.15 unsigned32 read-write
Valid when sheAdslVccTpEgressQosClass is shapingRtVbr or shapingNrtVbr
                   sheAdslVccTpControlEgressMaxBurstSize 1.3.6.1.4.1.231.7.1.2.1.6.1.1.26.16 unsigned32 read-write
Valid when sheAdslVccTpEgressQosClass is shapingRtVbr or shapingNrtVbr
                   sheAdslVccTpControlEgressWeight 1.3.6.1.4.1.231.7.1.2.1.6.1.1.26.17 integer32 read-write
Valid only when sheAdslVccTpEgressQosClass is unshaped.
                   sheAdslVccTpControlIngressSustainedCellRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.26.18 unsigned32 read-write
GFR scr for ingress policing
                   sheAdslVccTpControlIngressMaxBurstSize 1.3.6.1.4.1.231.7.1.2.1.6.1.1.26.19 unsigned32 read-write
GFR mbs for ingress policing
                   sheAdslVccTpControlAdminState 1.3.6.1.4.1.231.7.1.2.1.6.1.1.26.20 sheadslenabletype read-write
look at table
                   sheAdslVccTpControlOrl 1.3.6.1.4.1.231.7.1.2.1.6.1.1.26.21 unsigned32 read-write
look at table
                   sheAdslVccTpControlUsedDslChannel 1.3.6.1.4.1.231.7.1.2.1.6.1.1.26.22 sheadslconflinetype read-write
This attribute defines the usage of a dsl bearer channel by this VccTp. The availability of dsl channels depends on the configuration of the underlaying adsl line (VccTpSublayerIndex points to this line). Valid values for configuration: fastOnly(2) - only in dualLatency mode available interleavedOnly(3) - only in dualLatency mode available In singleLatency mode , no configuration is possible.
                   sheAdslVccTpControlEncapsulation 1.3.6.1.4.1.231.7.1.2.1.6.1.1.26.23 sheadslatmencaptype read-write
Encapsulation type over AAL5.
             sheAdslVccTpNotifications 1.3.6.1.4.1.231.7.1.2.1.6.1.1.27
                   sheAdslVccTpCreated 1.3.6.1.4.1.231.7.1.2.1.6.1.1.27.1
Configuration notification.
                   sheAdslVccTpModified 1.3.6.1.4.1.231.7.1.2.1.6.1.1.27.2
Configuration notification.
                   sheAdslVccTpDeleted 1.3.6.1.4.1.231.7.1.2.1.6.1.1.27.3
Configuration notification.
                   sheAdslVccRDIAlarm 1.3.6.1.4.1.231.7.1.2.1.6.1.1.27.4
RDI detected.
                   sheAdslVccAISAlarm 1.3.6.1.4.1.231.7.1.2.1.6.1.1.27.5
AIS detected.
                   sheAdslVccTpConfigurationFailed 1.3.6.1.4.1.231.7.1.2.1.6.1.1.27.6
Notification in case of failed VccTp-Configuration.
                   sheAdslVccTpChangedEgressShaping 1.3.6.1.4.1.231.7.1.2.1.6.1.1.27.7
ATM egress shaping paramters were changed.
                   sheAdslVccTpChangedIngressPolicing 1.3.6.1.4.1.231.7.1.2.1.6.1.1.27.8
ATM ingress policing paramters were changed.
                   sheAdslVccTpAdminStateChanged 1.3.6.1.4.1.231.7.1.2.1.6.1.1.27.9
Configuration notification.
                   sheAdslVccTpOrlChanged 1.3.6.1.4.1.231.7.1.2.1.6.1.1.27.10
Configuration trap.
                   sheAdslVccTpUsedDslChannelChanged 1.3.6.1.4.1.231.7.1.2.1.6.1.1.27.11
Modification trap.
                   sheAdslVccTpPerformanceCountersCleared 1.3.6.1.4.1.231.7.1.2.1.6.1.1.27.12
Configuration notification.
                   sheAdslVccTpEncapsulationChanged 1.3.6.1.4.1.231.7.1.2.1.6.1.1.27.13
Configuration notification.
             sheAdslRfiBandTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.29 no-access
The RFI Band Table.
                   sheAdslRfiBandEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.29.1 no-access
This table contains RFI band configuration. For more details, refer ITU-T G.992.5 and ITU-T G.997.1.
                       sheAdslRfiBandIndex 1.3.6.1.4.1.231.7.1.2.1.6.1.1.29.1.1 integer32 read-only
Table Index, automatically generated when the table is created. This is used as Bit mask index of sheAdslLineConfExtnProfileRfiBandMask
                       sheAdslRfiBandName 1.3.6.1.4.1.231.7.1.2.1.6.1.1.29.1.2 octet string read-only
A descriptional name for the RFI band. Special characters are not allowed, like: space : ?
                       sheAdslRfiBandStartTone 1.3.6.1.4.1.231.7.1.2.1.6.1.1.29.1.3 integer32 read-only
The start subcarrier index belonging to breakpoint:[ti;ti+1], corresponding to the low level of notch.
                       sheAdslRfiBandStopTone 1.3.6.1.4.1.231.7.1.2.1.6.1.1.29.1.4 integer32 read-only
The stop subcarrier index belonging to breakpoint:[ti;ti+1], corresponding to the low level of notch.
             sheAdslRfiBandControl 1.3.6.1.4.1.231.7.1.2.1.6.1.1.30
                   sheAdslRfiBandControlRequest 1.3.6.1.4.1.231.7.1.2.1.6.1.1.30.1 sheadslcontrolrequesttype read-write
createAdslRfiBand: sheAdslRfiBandControlName sheAdslRfiBandControlStartTone sheAdslRfiBandControlStopTone deleteAdslRfiBand: sheAdslRfiBandControlIndex
                   sheAdslRfiBandControlIndex 1.3.6.1.4.1.231.7.1.2.1.6.1.1.30.2 integer32 read-write
Index of the Table-entry to be configured.
                   sheAdslRfiBandControlStatus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.30.3 shecontrolstatustype read-only
The status of a user command.
                   sheAdslRfiBandControlTimer 1.3.6.1.4.1.231.7.1.2.1.6.1.1.30.4 gauge32 read-only
The maximum wait time for the manager for a long running user command.
                   sheAdslRfiBandControlReqResult 1.3.6.1.4.1.231.7.1.2.1.6.1.1.30.5 sheadslcontrolrequestresulttype read-only
The result of the last user command.
                   sheAdslRfiBandControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.6.1.1.30.6 unsigned32 read-only
The time stamp of the last command (end of command).
                   sheAdslRfiBandControlName 1.3.6.1.4.1.231.7.1.2.1.6.1.1.30.7 octet string read-write
A descriptional name for the RFI band.
                   sheAdslRfiBandControlStartTone 1.3.6.1.4.1.231.7.1.2.1.6.1.1.30.8 integer32 read-write
The start subcarrier index belonging to breakpoint:[ti;ti+1], corresponding to the low level of notch.
                   sheAdslRfiBandControlStopTone 1.3.6.1.4.1.231.7.1.2.1.6.1.1.30.9 integer32 read-write
The stop subcarrier index belonging to breakpoint:[ti;ti+1], corresponding to the low level of notch.
             sheAdslRfiBandNotifications 1.3.6.1.4.1.231.7.1.2.1.6.1.1.31
                   sheAdslRfiBandCreated 1.3.6.1.4.1.231.7.1.2.1.6.1.1.31.1
When an ADSL RFI Band is created, it occurs.
                   sheAdslRfiBandDeleted 1.3.6.1.4.1.231.7.1.2.1.6.1.1.31.2
When an ADSL RFI Band is removed, it occurs.
             sheAdslAtucPsdRefMasks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.32
                   sheAdslAtucPsdRefMaskAdsl2AnnexA 1.3.6.1.4.1.231.7.1.2.1.6.1.1.32.1 octet string read-only
< PSD reference mask data format description > PSD mask can be described with a set of breakpoints. Breakpoint is a pair of tone index and PSD level. Number of maximum breakpoint is 32. All variable in this format is network byte order (big endian). < Data field of PSD reference mask > Breakpoint# tone index : tone index for breakpoint. Valid range is 1~255 for sheAdslAtucPsdRefMaskAdsl2AnnexA, sheAdslAtucPsdRefMaskAdsl2AnnexB and sheAdslAtucPsdRefMaskAnnexL, 1-511 for sheAdslAtucPsdRefMaskAdsl2plusAnnexA and sheAdslAtucPsdRefMaskAdsl2plusAnnexB. Breakpoint# PSD level : According to ITU-T G.997.1, the PSD maks level shall be coded as an unsigned integer represening PSD levels 0dBm/Hz (coded as 0) to -127.5 dBm/Hz (coded as 255), in the steps of 0.5dBm/Hz, with valid range 0 to -95dBm/Hz. So Valid value range is 0~190. Tone index of first breakpoint should be 1. Tone index of last valid breakpoint should be 255 in case of Adsl2AnnexA, Adsl2AnnexB, AnnexL. And should be 511 for Adsl2plusAnnexA, Adsl2plusAnnexB case Breakpoint should be alligned with increasing tone order. < PSD Reference mask data format (Maximum 128 bytes) > Breakpoint1 tone index (2bytes) Breakpoint1 PSD level (1bytes) Breakpoint2 tone index (2bytes) Breakpoint2 PSD level (1bytes) Breakpoint3 tone index (2bytes) Breakpoint3 PSD level (1bytes) Breakpoint32 tone index (2bytes) Breakpoint32 PSD level (1bytes)
                   sheAdslAtucPsdRefMaskAdsl2AnnexB 1.3.6.1.4.1.231.7.1.2.1.6.1.1.32.2 octet string read-only
Refer to the sheAdslAtucPsdRefMaskAdsl2AnnexA description.
                   sheAdslAtucPsdRefMaskAdsl2plusAnnexA 1.3.6.1.4.1.231.7.1.2.1.6.1.1.32.3 octet string read-only
Refer to the sheAdslAtucPsdRefMaskAdsl2AnnexA description.
                   sheAdslAtucPsdRefMaskAdsl2plusAnnexB 1.3.6.1.4.1.231.7.1.2.1.6.1.1.32.4 octet string read-only
Refer to the sheAdslAtucPsdRefMaskAdsl2AnnexA description.
                   sheAdslAtucPsdRefMaskAnnexL 1.3.6.1.4.1.231.7.1.2.1.6.1.1.32.5 octet string read-only
Refer to the sheAdslAtucPsdRefMaskAdsl2AnnexA description
             sheAdslAtucDualChanTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.33 no-access
This table provides one row for each ATUC channel. Only supported by NE R2.5 and higher.
                   sheAdslAtucDualChanEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.33.1 no-access
An entry in the adslAtucChanTable. New table only supported by NE releases up R2.5. Indexed by ifIndex - ChanType.
                       sheAdslAtucDualChanInterleaveDelay 1.3.6.1.4.1.231.7.1.2.1.6.1.1.33.1.1 gauge32 read-only
Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency. In the case where the ifType is Fast(125), use noSuchObject.
                       sheAdslAtucDualChanCurrTxRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.33.1.2 gauge32 read-only
Actual transmit rate on this channel.
                       sheAdslAtucDualChanPrevTxRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.33.1.3 gauge32 read-only
The rate at the time of the last adslAtucRateChangeTrap event. It is also set at initialization to prevent a trap being sent. Rate changes less than adslAtucThresh(*)RateDown or less than adslAtucThresh(*)RateUp will not cause a trap or cause this object to change. (*) == Fast or Interleave. See AdslLineAlarmConfProfileEntry.
                       sheAdslAtucDualChanCrcBlockLength 1.3.6.1.4.1.231.7.1.2.1.6.1.1.33.1.4 gauge32 read-only
Indicates the length of the channel data-block on which the CRC operates. Refer to Line Code Specific MIBs, [11] and [12] for more information.
                       sheAdslAtucDualChanCurrAtmStatus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.33.1.5 sheadsllineatmstatus read-only
indicates an ncd or lcd failure if the counter surpasses 127. If neither ATM counter surpasses 127, the return value will be 'NoAtmDefect'. noAtmDefect(0), noCellDeleniation(1), lossOfCellDeleniation(2)
                       sheAdslAtucDualChanRsSymbols 1.3.6.1.4.1.231.7.1.2.1.6.1.1.33.1.6 unsigned32 read-only
Indicates number of DMT symbols per Reed-Solomon code word (S) in the downstream direction. Note that S is not restricted to interleaved mode only. Even in fast mode, S is a valid constant value and is equal to 1.
                       sheAdslAtucDualChanRsDepth 1.3.6.1.4.1.231.7.1.2.1.6.1.1.33.1.7 unsigned32 read-only
Indicates interleaving depth (D) in the downstream direction. Note that D is not restricted to interleaved mode only. Even in fast mode, D is a valid constant value and is equal to 1.
                       sheAdslAtucDualChanRsRedundancy 1.3.6.1.4.1.231.7.1.2.1.6.1.1.33.1.8 unsigned32 read-only
Indicates number of redundant bytes (R) per Reed-Solomon code in the downstream direction.
                       sheAdslAtucDualChanType 1.3.6.1.4.1.231.7.1.2.1.6.1.1.33.1.9 sheadslchanneltype read-only
Explains the type of channel entry interleaved or fast! (1) interleaved channel (2) fast channel
             sheAdslAturDualChanTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.34 no-access
This table provides one row for each ATUR channel. Only supported by NE R2.5 and higher.
                   sheAdslAturDualChanEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.34.1 no-access
An entry in the adslAturChanTable. New table only supported by NE releases up R2.5. Indexed by ifIndex - ChanType.
                       sheAdslAturDualChanInterleaveDelay 1.3.6.1.4.1.231.7.1.2.1.6.1.1.34.1.1 gauge32 read-only
Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input bytes at the interleaver input and their placement in the bit stream at the interleaver output. Larger numbers provide greater separation between consecutive input bytes in the output bit stream allowing for improved impulse noise immunity at the expense of payload latency. In the case where the ifType is Fast(125), use noSuchObject.
                       sheAdslAturDualChanCurrTxRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.34.1.2 gauge32 read-only
Actual transmit rate on this channel.
                       sheAdslAturDualChanPrevTxRate 1.3.6.1.4.1.231.7.1.2.1.6.1.1.34.1.3 gauge32 read-only
The rate at the time of the last adslAturRateChangeTrap event. It is also set at initialization to prevent a trap being sent. Rate changes less than adslAturThresh(*)RateDown or less than adslAturThresh(*)RateUp will not cause a trap or cause this object to change. (*) == Fast or Interleave. See AdslLineAlarmConfProfileEntry.
                       sheAdslAturDualChanCrcBlockLength 1.3.6.1.4.1.231.7.1.2.1.6.1.1.34.1.4 gauge32 read-only
Indicates the length of the channel data-block on which the CRC operates. Refer to Line Code Specific MIBs, [11] and [12] for more information.
                       sheAdslAturDualChanCurrAtmStatus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.34.1.5 sheadsllineatmstatus read-only
This object indicates an ncd or lcd failure if the counter surpasses 127. If neither ATM counter surpasses 127, the return value will be NoAtmDefect. noAtmDefect(0), noCellDeleniation(1), lossOfCellDeleniation(2)
                       sheAdslAturDualChanRsSymbols 1.3.6.1.4.1.231.7.1.2.1.6.1.1.34.1.6 unsigned32 read-only
This object indicates number of DMT symbols per Reed- Solomon code word (S) in the upstream direction Note that S is not restricted to interleaved mode only. Even in fast mode, S is a valid constant value and is equal to 1.
                       sheAdslAturDualChanRsDepth 1.3.6.1.4.1.231.7.1.2.1.6.1.1.34.1.7 unsigned32 read-only
This object indicates interleaving depth (D) in the upstream direction Note that D is not restricted to interleaved mode only. Even in fast mode, D is a valid constant value and is equal to 1.
                       sheAdslAturDualChanRsRedundancy 1.3.6.1.4.1.231.7.1.2.1.6.1.1.34.1.8 unsigned32 read-only
This object indicates number of redundant bytes (R) per Reed-Solomon code in the upstream direction.
                       sheAdslAturDualChanType 1.3.6.1.4.1.231.7.1.2.1.6.1.1.34.1.9 sheadslchanneltype read-only
Explains the type of channel entry interleaved or fast! (1) interleaved channel (2) fast channel
             sheAdslAtucDualChanPerfDataTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35 no-access
This table provides one row for each ATUC channel. Only supported by NE R2.5 and higher.
                   sheAdslAtucDualChanPerfDataEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1 no-access
An entry in adslAtucChanPerfDataTable. New table only supported by NE releases up R2.5. Indexed by ifIndex - ChanType.
                       sheAdslAtucDualChanPerfDataTimeElapsed 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.1 gauge32 read-only
Total elapsed seconds in this interval.
                       sheAdslAtucDualChanPerfDataReceivedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.2 counter32 read-only
Count of all encoded blocks received on this channel since agent reset.
                       sheAdslAtucDualChanPerfDataTransmittedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.3 counter32 read-only
Count of all encoded blocks transmitted on this channel since agent reset.
                       sheAdslAtucDualChanPerfDataCorrectedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.4 counter32 read-only
Count of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data.
                       sheAdslAtucDualChanPerfDataUncorrectBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.5 counter32 read-only
Count of all blocks received with uncorrectable errors since agent reset.
                       sheAdslAtucDualChanPerfDataNcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.6 gauge32 read-only
Count of no cell delineation(ncd) on this channel.
                       sheAdslAtucDualChanPerfDataOcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.7 gauge32 read-only
Count of out of cell delineation (ocd) on this channel.
                       sheAdslAtucDualChanPerfDataHec 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.8 gauge32 read-only
Header error check counter(hec) on this channel.
                       sheAdslAtucDualChanPerfDataValidIntervals 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.9 integer read-only
The number of previous 15-minute intervals in the interval table for which data was collected. Given that is the maximum # of intervals supported. The value will be unless the measurement was (re-)started within the last (*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
                       sheAdslAtucDualChanPerfDataInvalidIntervals 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.10 integer read-only
The number of intervals in the range from 0 to the value of adslAtucChanPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
                       sheAdslAtucDualChanPerfDataCurr15MinTimeElapsed 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.11 adslperftimeelapsed read-only
Total elapsed seconds in this interval.
                       sheAdslAtucDualChanPerfDataCurr15MinReceivedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.12 perfcurrentcount read-only
Count of all encoded blocks received on this channel within the current 15 minute interval.
                       sheAdslAtucDualChanPerfDataCurr15MinTransmittedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.13 perfcurrentcount read-only
Count of all encoded blocks transmitted on this channel within the current 15 minute interval.
                       sheAdslAtucDualChanPerfDataCurr15MinCorrectedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.14 perfcurrentcount read-only
Count of all blocks received with errors that were corrected on this channel within the current 15 minute interval.
                       sheAdslAtucDualChanPerfDataCurr15MinUncorrectBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.15 perfcurrentcount read-only
Count of all blocks received with uncorrectable errors on this channel within the current 15 minute interval.
                       sheAdslAtucDualChanPerfDataCurr15MinNcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.16 gauge32 read-only
Count of no cell delineation(ncd) on this channel within the current 15 minute time interval.
                       sheAdslAtucDualChanPerfDataCurr15MinOcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.17 gauge32 read-only
Count of out of cell delineation (ocd) on this channel within the current 15 minute time interval.
                       sheAdslAtucDualChanPerfDataCurr15MinHec 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.18 gauge32 read-only
Header error check counter(hec) on this channel within the current 15 minute time interval.
                       sheAdslAtucDualChanPerfDataCurr1DayTimeElapsed 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.19 adslperftimeelapsed read-only
Number of seconds that have elapsed since the beginning of the current 1-day interval.
                       sheAdslAtucDualChanPerfDataCurr1DayReceivedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.20 adslperfcurrdaycount read-only
Count of all encoded blocks received on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed.
                       sheAdslAtucDualChanPerfDataCurr1DayTransmittedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.21 adslperfcurrdaycount read-only
Count of all encoded blocks transmitted on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed.
                       sheAdslAtucDualChanPerfDataCurr1DayCorrectedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.22 adslperfcurrdaycount read-only
Count of all blocks received with errors that were corrected on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed.
                       sheAdslAtucDualChanPerfDataCurr1DayUncorrectBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.23 adslperfcurrdaycount read-only
Count of all blocks received with uncorrectable errors on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed.
                       sheAdslAtucDualChanPerfDataCurr1DayNcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.24 gauge32 read-only
Count of no cell delineation (ncd) on this channel within the current 1 day time interval.
                       sheAdslAtucDualChanPerfDataCurr1DayOcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.25 gauge32 read-only
Count of out of cell delineation (ocd) on this channel within the current 1 day time interval.
                       sheAdslAtucDualChanPerfDataCurr1DayHec 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.26 gauge32 read-only
Header error check counter (hec) on this channel within the current 1 day time interval.
                       sheAdslAtucDualChanPerfDataPrev1DayMoniSecs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.27 integer read-only
The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected for any reason.
                       sheAdslAtucDualChanPerfDataPrev1DayReceivedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.28 adslperfprevdaycount read-only
Count of all encoded blocks received on this channel within the most recent previous 1-day period.
                       sheAdslAtucDualChanPerfDataPrev1DayTransmittedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.29 adslperfprevdaycount read-only
Count of all encoded blocks transmitted on this channel within the most recent previous 1-day period.
                       sheAdslAtucDualChanPerfDataPrev1DayCorrectedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.30 adslperfprevdaycount read-only
Count of all blocks received with errors that were corrected on this channel within the most recent previous 1-day period.
                       sheAdslAtucDualChanPerfDataPrev1DayUncorrectBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.31 adslperfprevdaycount read-only
Count of all blocks received with uncorrectable errors on this channel within the most recent previous 1-day period.
                       sheAdslAtucDualChanPerfDataPrev1DayNcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.32 gauge32 read-only
Count of no cell delineation (ncd) on this channel within the most recent previous 1-day period.
                       sheAdslAtucDualChanPerfDataPrev1DayOcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.33 gauge32 read-only
Count of out of cell delineation (ocd) on this channel within the most recent previous 1-day period.
                       sheAdslAtucDualChanPerfDataPrev1DayHec 1.3.6.1.4.1.231.7.1.2.1.6.1.1.35.1.34 gauge32 read-only
Header error check counter(hec) on this channel within the most recent previous 1-day period.
             sheAdslAturDualChanPerfDataTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36 no-access
This table provides one row for each ATUR channel. Only supported by NE R2.5 and higher.
                   sheAdslAturDualChanPerfDataEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1 no-access
An entry in adslAturChanPerfDataTable. New table only supported by NE releases up R2.5. Indexed by ifIndex - ChanType.
                       sheAdslAturDualChanPerfDataReceivedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.1 counter32 read-only
Count of all encoded blocks received on this channel since agent reset.
                       sheAdslAturDualChanPerfDataTransmittedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.2 counter32 read-only
Count of all encoded blocks transmitted on this channel since agent reset.
                       sheAdslAturDualChanPerfDataCorrectedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.3 counter32 read-only
Count of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data.
                       sheAdslAturDualChanPerfDataUncorrectBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.4 counter32 read-only
Count of all blocks received with uncorrectable errors since agent reset.
                       sheAdslAturDualChanPerfDataExtnNcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.5 gauge32 read-only
Number of packets with no cell delineation(NCD) error on this channel.
                       sheAdslAturDualChanPerfDataExtnHec 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.6 gauge32 read-only
Number of packets with Header error check (HEC) error on this channel.
                       sheAdslAturDualChanPerfDataPerfValidIntervals 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.7 integer read-only
The number of previous 15-minute intervals in the interval table for which data was collected. Given that is the maximum # of intervals supported. The value will be unless the measurement was (re-)started within the last (*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases (e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
                       sheAdslAturDualChanPerfDataPerfInvalidIntervals 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.8 integer read-only
The number of intervals in the range from 0 to the value of adslAturChanPerfValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
                       sheAdslAturDualChanPerfDataCurr15MinTimeElapsed 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.9 adslperftimeelapsed read-only
Total elapsed seconds in this interval. A full interval is 900 seconds.
                       sheAdslAturDualChanPerfDataCurr15MinReceivedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.10 perfcurrentcount read-only
Count of all encoded blocks received on this channel within the current 15 minute interval.
                       sheAdslAturDualChanPerfDataCurr15MinTransmittedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.11 perfcurrentcount read-only
Count of all encoded blocks transmitted on this channel within the current 15 minute interval.
                       sheAdslAturDualChanPerfDataCurr15MinCorrectedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.12 perfcurrentcount read-only
Count of all blocks received with errors that were corrected on this channel within the current 15 minute interval.
                       sheAdslAturDualChanPerfDataCurr15MinUncorrectBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.13 perfcurrentcount read-only
Count of all blocks received with uncorrectable errors on this channel within the current 15 minute interval.
                       sheAdslAturDualChanPerfDataExtnCurr15MinNcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.14 gauge32 read-only
Number of packets with no cell delineation(NCD) error on this channel within the current 15 minute time interval.
                       sheAdslAturDualChanPerfDataExtnCurr15MinHec 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.15 gauge32 read-only
Number of packets with Header error check (HEC) error on this channel within the current 15 minute time interval.
                       sheAdslAturDualChanPerfDataCurr1DayTimeElapsed 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.16 adslperftimeelapsed read-only
Number of seconds that have elapsed since the beginning of the current 1-day interval.
                       sheAdslAturDualChanPerfDataCurr1DayReceivedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.17 adslperfcurrdaycount read-only
Count of all encoded blocks received on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed.
                       sheAdslAturDualChanPerfDataCurr1DayTransmittedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.18 adslperfcurrdaycount read-only
Count of all encoded blocks transmitted on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed.
                       sheAdslAturDualChanPerfDataCurr1DayCorrectedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.19 adslperfcurrdaycount read-only
Count of all blocks received with errors that were corrected on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed.
                       sheAdslAturDualChanPerfDataCurr1DayUncorrectBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.20 adslperfcurrdaycount read-only
Count of all blocks received with uncorrectable errors on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed.
                       sheAdslAturDualChanPerfDataExtnCurr1DayNcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.21 gauge32 read-only
Number of packets with no cell delineation (NCD) error on this channel within the current 1 day time interval.
                       sheAdslAturDualChanPerfDataExtnCurr1DayHec 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.22 gauge32 read-only
Number of packets with Header error check (HEC) error on this channel within the current 1 day time interval.
                       sheAdslAturDualChanPerfDataPrev1DayMoniSecs 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.23 integer read-only
The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the interval duration except in a situation where performance monitoring data could not be collected for any reason.
                       sheAdslAturDualChanPerfDataPrev1DayReceivedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.24 adslperfprevdaycount read-only
Count of all encoded blocks received on this channel within the most recent previous 1-day period.
                       sheAdslAturDualChanPerfDataPrev1DayTransmittedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.25 adslperfprevdaycount read-only
Count of all encoded blocks transmitted on this channel within the most recent previous 1-day period.
                       sheAdslAturDualChanPerfDataPrev1DayCorrectedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.26 adslperfprevdaycount read-only
Count of all blocks received with errors that were corrected on this channel within the most recent previous 1-day period.
                       sheAdslAturDualChanPerfDataPrev1DayUncorrectBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.27 adslperfprevdaycount read-only
Count of all blocks received with uncorrectable errors on this channel within the most recent previous 1-day period.
                       sheAdslAturDualChanPerfDataExtnPrev1DayNcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.28 gauge32 read-only
Number of packets with no cell delineation (NCD) error on this channel within the most recent previous period.
                       sheAdslAturDualChanPerfDataExtnPrev1DayHec 1.3.6.1.4.1.231.7.1.2.1.6.1.1.36.1.29 gauge32 read-only
Number of packets with Header error check (HEC) error on this channel within the most recent previous period.
             sheAdslAtucDualChanIntervalTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.37 no-access
This table provides one row for each ATUC channel's performance data collection interval. Only supported by NE R2.5 and higher.
                   sheAdslAtucDualChanIntervalEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.37.1 no-access
An entry in the adslAtucIntervalTable. New table only supported by NE releases up R2.5. Indexed by ifIndex - ChanType - IntervalNumber.
                       sheAdslAtucDualChanIntervalNumber 1.3.6.1.4.1.231.7.1.2.1.6.1.1.37.1.1 integer read-only
Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional.
                       sheAdslAtucDualChanIntervalValidData 1.3.6.1.4.1.231.7.1.2.1.6.1.1.37.1.2 truthvalue read-only
This variable indicates if the data for this interval is valid.
                       sheAdslAtucDualChanIntervalEndTime 1.3.6.1.4.1.231.7.1.2.1.6.1.1.37.1.3 unsigned32 read-only
This variable indicates the time of storing this interval.
                       sheAdslAtucDualChanIntervalReceivedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.37.1.4 perfintervalcount read-only
Count of all encoded blocks received on this channel during this interval.
                       sheAdslAtucDualChanIntervalTransmittedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.37.1.5 perfintervalcount read-only
Count of all encoded blocks transmitted on this channel during this interval.
                       sheAdslAtucDualChanIntervalCorrectedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.37.1.6 perfintervalcount read-only
Count of all blocks received with errors that were corrected on this channel during this interval.
                       sheAdslAtucDualChanIntervalUncorrectBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.37.1.7 perfintervalcount read-only
Count of all blocks received with uncorrectable errors on this channel during this interval.
                       sheAdslAtucDualChanIntervalNcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.37.1.8 counter32 read-only
Indicates count of no cell delineation on this channel for this interval.
                       sheAdslAtucDualChanIntervalOcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.37.1.9 counter32 read-only
Indicates count of out cell delineation on this channel for this interval.
                       sheAdslAtucDualChanIntervalHec 1.3.6.1.4.1.231.7.1.2.1.6.1.1.37.1.10 counter32 read-only
Indicates Header error check counter on this channel during this interval.
             sheAdslAturDualChanIntervalTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.38 no-access
This table provides one row for each ATUR channel's performance data collection interval. Only supported by NE R2.5 and higher.
                   sheAdslAturDualChanIntervalEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.38.1 no-access
An entry in the adslAturIntervalTable. New table only supported by NE releases up R2.5. Indexed by ifIndex - ChanType - IntervalNumber.
                       sheAdslAturDualChanIntervalNumber 1.3.6.1.4.1.231.7.1.2.1.6.1.1.38.1.1 integer read-only
Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional.
                       sheAdslAturDualChanIntervalValidData 1.3.6.1.4.1.231.7.1.2.1.6.1.1.38.1.2 truthvalue read-only
This variable indicates if the data for this interval is valid.
                       sheAdslAturDualChanIntervalEndTime 1.3.6.1.4.1.231.7.1.2.1.6.1.1.38.1.3 unsigned32 read-only
This variable indicates the time of storing this interval.
                       sheAdslAturDualChanIntervalReceivedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.38.1.4 perfintervalcount read-only
Count of all encoded blocks received on this channel during this interval.
                       sheAdslAturDualChanIntervalTransmittedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.38.1.5 perfintervalcount read-only
Count of all encoded blocks transmitted on this channel during this interval.
                       sheAdslAturDualChanIntervalCorrectedBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.38.1.6 perfintervalcount read-only
Count of all blocks received with errors that were corrected on this channel during this interval.
                       sheAdslAturDualChanIntervalUncorrectBlks 1.3.6.1.4.1.231.7.1.2.1.6.1.1.38.1.7 perfintervalcount read-only
Count of all blocks received with uncorrectable errors on this channel during this interval.
                       sheAdslAturDualChanIntervalNcd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.38.1.8 gauge32 read-only
Indicates count of no cell delineation on this channel for this interval.
                       sheAdslAturDualChanIntervalHec 1.3.6.1.4.1.231.7.1.2.1.6.1.1.38.1.9 gauge32 read-only
Indicates Header error check counter on this channel during this interval.
             sheAdslLineDpboProfileTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.39 no-access
The Dpbo Profile Table. Support with SHE R2.6 RP2.
                   sheAdslLineDpboProfileEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.39.1 no-access
This table contains DPBO profile configuration. For more details, refer ITU-T G.997.1 chapter 7.3.1.2.13.
                       sheAdslLineDpboProfileIndex 1.3.6.1.4.1.231.7.1.2.1.6.1.1.39.1.1 integer32 read-only
Table Index, automatically generated when the table entry is created.
                       sheAdslLineDpboProfileName 1.3.6.1.4.1.231.7.1.2.1.6.1.1.39.1.2 octet string read-only
This object is used by the line configuration table in order to identify a row of this table for Dpbo profile assign. Special characters are not allowed, like: space : ?
                       sheAdslLineDpboProfileEsel 1.3.6.1.4.1.231.7.1.2.1.6.1.1.39.1.3 unsigned32 read-only
This configuration parameter defines the assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility point (cabinet), that may also host remotely located DSL that is subject to spectrally shaped downstream power backoff depending on this length. For this parameter the electrical length is defined as the loss (in dB) of an equivalent length of hypothetical cable at a reference frequency defined by the network operator or in spectrum management regulations. All values which can be represented by the format are valid values. If this value is zero, the DPBO in this section shall be disabled. If this value is not zero and sheAdslLineDpboProfileEselMin is not 512 (disabled EselMin), sheAdslLineDpboProfileEsel >= sheAdslLineDpboProfileEselMin is required!
                       sheAdslLineDpboProfileEselMin 1.3.6.1.4.1.231.7.1.2.1.6.1.1.39.1.4 unsigned32 read-only
This configuration parameter defines the minimum assumed electrical length of cables (E-side cables) connecting exchange based DSL services to a remote flexibility point (cabinet), that may also host remotely located DSL that is subject to spectrally shaped downstream power backoff depending on this length. For this parameter the electrical length is defined as the loss (in dB) of an equivalent length of hypothetical cable at a reference frequency defined by the network operator or in spectrum management regulations. All values which can be represented by the format are valid values. Default: sheAdslLineDpboProfileEselMin = 512 If this value is not 512 (disabled) and sheAdslLineDpboProfileEsel is not zero (DPBO disabled), sheAdslLineDpboProfileEsel >= sheAdslLineDpboProfileEselMin is required!
                       sheAdslLineDpboProfileMus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.39.1.5 unsigned32 read-only
DPBOMUS defines the assumed Minimum Usable receive Signal PSD (in dBm/Hz) for exchange based services, used to modify parameter DPBOFMAX defined below. All values which can be represented by the format are valid values: 0 = 0 dBm/Hz .. -127.5 dBm/Hz (coded as 255).
                       sheAdslLineDpboProfileMof 1.3.6.1.4.1.231.7.1.2.1.6.1.1.39.1.6 unsigned32 read-only
DPBOMOF (mask overall floor) defines the absolut minimum of the used PSD mask (in dBm/Hz) for exchange based services. All values which can be represented by the format are valid values: 0 = 0 dBm/Hz .. -127.5 dBm/Hz (coded as 255). Note: Not longer supported!
                       sheAdslLineDpboProfileFMin 1.3.6.1.4.1.231.7.1.2.1.6.1.1.39.1.7 unsigned32 read-only
DPBO shall be applied in the range starting at DPBOFMIN and should be configured as an subcarrier index. The range of valid values is from 1 to 512.
                       sheAdslLineDpboProfileFMax 1.3.6.1.4.1.231.7.1.2.1.6.1.1.39.1.8 unsigned32 read-only
The maximum subcarrier at which DPBO may be applied is DPBOFMAX. The range of valid values is from 1 to 512.
                       sheAdslLineDpboProfileEpsd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.39.1.9 octet string read-only
Used PSD mask that is assumed to be permitted at the exchange. The set of breakpoints can be represented as [(t1, PSD1),(t2, PSD2), .. , (tN, PSDN)]. The subcarrier index (tN) shall be coded as an unsigned integer (16 bit, range 1..512). The MIB PSD mask level (PSDN) shall be coded as an unsigned integer (16 bit) representing the MIB PSD mask levels 0 dBm/Hz (coded as 0) to -127.5 dBm/Hz (coded as 255), in steps of 0.5 dBm/Hz. The maximum number of breakpoints for DPBOEPSD is 16. If less then maximum breakpoints will be defined, all used breakpoints should be configured in a consecutive way without spaces (t1 - t2 - t3.. and not t1 - t5 - t7..). The default value should be set according PSD settings for ADSL2+. Subcarrier PSD 59 -36.5 256 -36.5 314 -42 376 -46.5 499 -47.5
                       sheAdslLineDpboProfileEScmA 1.3.6.1.4.1.231.7.1.2.1.6.1.1.39.1.10 unsigned32 read-only
This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that are used to estimate the frequency dependent loss of E-side cables calculated from the DPBOESEL parameter using the formula: ESCM(f) = (DPBOESCMA + DPBOESCMB*sqrt(f) + DPBOESCMC*f )*DPBOESCL Where ESCM is expressed in dB and f is expressed in MHz. DPBOESCMA, DPBOESCMB, DPBOESCMC shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in step of 2^-8. All values are valid.
                       sheAdslLineDpboProfileEScmB 1.3.6.1.4.1.231.7.1.2.1.6.1.1.39.1.11 unsigned32 read-only
This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that are used to estimate the frequency dependent loss of E-side cables calculated from the DPBOESEL parameter using the formula: ESCM(f) = (DPBOESCMA + DPBOESCMB*sqrt(f) + DPBOESCMC*f )*DPBOESCL Where ESCM is expressed in dB and f is expressed in MHz. DPBOESCMA, DPBOESCMB, DPBOESCMC shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in step of 2^-8. All values are valid.
                       sheAdslLineDpboProfileEScmC 1.3.6.1.4.1.231.7.1.2.1.6.1.1.39.1.12 unsigned32 read-only
This configuration parameter defines a cable model in terms of three scalars DPBOESCMA, DPBOESCMB and DPBOESCMC that are used to estimate the frequency dependent loss of E-side cables calculated from the DPBOESEL parameter using the formula: ESCM(f) = (DPBOESCMA + DPBOESCMB*sqrt(f) + DPBOESCMC*f )*DPBOESCL Where ESCM is expressed in dB and f is expressed in MHz. DPBOESCMA, DPBOESCMB, DPBOESCMC shall be coded as unsigned integers representing a scalar value from -1 (coded as 0) to 1.5 (coded as 640) in step of 2^-8. All values are valid.
             sheAdslLineDpboProfileControl 1.3.6.1.4.1.231.7.1.2.1.6.1.1.40
                   sheAdslLineDpboProfileControlRequest 1.3.6.1.4.1.231.7.1.2.1.6.1.1.40.1 sheadslcontrolrequesttype read-write
createAdslLineDpboProfile: sheAdslLineDpboProfileControlName sheAdslLineDpboProfileControlEsel sheAdslLineDpboProfileControlEselMin sheAdslLineDpboProfileControlMus sheAdslLineDpboProfileControlMof sheAdslLineDpboProfileControlFMin sheAdslLineDpboProfileControlFMax sheAdslLineDpboProfileControlEpsd sheAdslLineDpboProfileControlEScmA sheAdslLineDpboProfileControlEScmB sheAdslLineDpboProfileControlEScmC modifyAdslLineDpboProfile: sheAdslLineDpboProfileControlIndex sheAdslLineDpboProfileControlEsel sheAdslLineDpboProfileControlEselMin sheAdslLineDpboProfileControlMus sheAdslLineDpboProfileControlMof sheAdslLineDpboProfileControlFMin sheAdslLineDpboProfileControlFMax sheAdslLineDpboProfileControlEpsd sheAdslLineDpboProfileControlEScmA sheAdslLineDpboProfileControlEScmB sheAdslLineDpboProfileControlEScmC deleteAdslLineDpboProfile sheAdslLineDpboProfileControlIndex
                   sheAdslLineDpboProfileControlIndex 1.3.6.1.4.1.231.7.1.2.1.6.1.1.40.2 integer32 read-write
Index of the Table-entry to be configured.
                   sheAdslLineDpboProfileControlStatus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.40.3 shecontrolstatustype read-only
The status of a user command.
                   sheAdslLineDpboProfileControlTimer 1.3.6.1.4.1.231.7.1.2.1.6.1.1.40.4 gauge32 read-only
The maximum wait time for the manager for a long running user command.
                   sheAdslLineDpboProfileControlReqResult 1.3.6.1.4.1.231.7.1.2.1.6.1.1.40.5 sheadslcontrolrequestresulttype read-only
The result of the last user command.
                   sheAdslLineDpboProfileControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.6.1.1.40.6 unsigned32 read-only
The time stamp of the last command (end of command).
                   sheAdslLineDpboProfileControlName 1.3.6.1.4.1.231.7.1.2.1.6.1.1.40.7 octet string read-write
A descriptional name for the Dpbo profile.
                   sheAdslLineDpboProfileControlEsel 1.3.6.1.4.1.231.7.1.2.1.6.1.1.40.8 unsigned32 read-write
look at table
                   sheAdslLineDpboProfileControlEselMin 1.3.6.1.4.1.231.7.1.2.1.6.1.1.40.9 unsigned32 read-write
look at table
                   sheAdslLineDpboProfileControlMus 1.3.6.1.4.1.231.7.1.2.1.6.1.1.40.10 unsigned32 read-write
look at table
                   sheAdslLineDpboProfileControlMof 1.3.6.1.4.1.231.7.1.2.1.6.1.1.40.11 unsigned32 read-write
look at table Note: Not longer supported!
                   sheAdslLineDpboProfileControlFMin 1.3.6.1.4.1.231.7.1.2.1.6.1.1.40.12 unsigned32 read-write
look at table
                   sheAdslLineDpboProfileControlFMax 1.3.6.1.4.1.231.7.1.2.1.6.1.1.40.13 unsigned32 read-write
look at table
                   sheAdslLineDpboProfileControlEpsd 1.3.6.1.4.1.231.7.1.2.1.6.1.1.40.14 octet string read-write
look at table.
                   sheAdslLineDpboProfileControlEScmA 1.3.6.1.4.1.231.7.1.2.1.6.1.1.40.15 unsigned32 read-write
look at table.
                   sheAdslLineDpboProfileControlEScmB 1.3.6.1.4.1.231.7.1.2.1.6.1.1.40.16 unsigned32 read-write
look at table.
                   sheAdslLineDpboProfileControlEScmC 1.3.6.1.4.1.231.7.1.2.1.6.1.1.40.17 unsigned32 read-write
look at table.
             sheAdslVccTpPerformanceTable 1.3.6.1.4.1.231.7.1.2.1.6.1.1.41 no-access
The VccTpPerformance-Table.
                   sheAdslVccTpPerformanceEntry 1.3.6.1.4.1.231.7.1.2.1.6.1.1.41.1 no-access
This table contains the VccTpPerformance-Counters. These are free running counters. The counters could be deleted with command deleteAdslVccTpPerformanceCounters via sheAdslVccTpControl-Group.
                       sheAdslVccTpIngressUnicastPackets 1.3.6.1.4.1.231.7.1.2.1.6.1.1.41.1.1 counter32 read-only
Ingress Unicast Packet Counter for this VccTp.
                       sheAdslVccTpIngressMulticastPackets 1.3.6.1.4.1.231.7.1.2.1.6.1.1.41.1.2 counter32 read-only
Ingress Multicast Packet Counter for this VccTp.
                       sheAdslVccTpIngressBroadcastPackets 1.3.6.1.4.1.231.7.1.2.1.6.1.1.41.1.3 counter32 read-only
Ingress Broadcast Packet Counter for this VccTp.
                       sheAdslVccTpIngressDiscardPackets 1.3.6.1.4.1.231.7.1.2.1.6.1.1.41.1.4 counter32 read-only
Ingress Discard Packet Counter for this VccTp.
                       sheAdslVccTpEgressUnicastPackets 1.3.6.1.4.1.231.7.1.2.1.6.1.1.41.1.5 counter32 read-only
Egress Unicast Packet Counter for this VccTp.
                       sheAdslVccTpEgressMulticastPackets 1.3.6.1.4.1.231.7.1.2.1.6.1.1.41.1.6 counter32 read-only
Egress Multicast Packet Counter for this VccTp.
                       sheAdslVccTpEgressBroadcastPackets 1.3.6.1.4.1.231.7.1.2.1.6.1.1.41.1.7 counter32 read-only
Egress Broadcast Packet Counter for this VccTp.
                       sheAdslVccTpEgressDiscardPackets 1.3.6.1.4.1.231.7.1.2.1.6.1.1.41.1.8 counter32 read-only
Egress Discard Packet Counter for this VccTp.
             sheAdslConformance 1.3.6.1.4.1.231.7.1.2.1.6.1.1.100
                     sheAdslCompliances 1.3.6.1.4.1.231.7.1.2.1.6.1.1.100.1
                         sheAdslCompliance 1.3.6.1.4.1.231.7.1.2.1.6.1.1.100.1.1
Description.
                     sheAdslGroups 1.3.6.1.4.1.231.7.1.2.1.6.1.1.100.2
                         sheAdslVccTpGroup 1.3.6.1.4.1.231.7.1.2.1.6.1.1.100.2.1
Description.
                         sheAdslVccTpControlGroup 1.3.6.1.4.1.231.7.1.2.1.6.1.1.100.2.2
Description.
                         sheAdslVccTpNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.6.1.1.100.2.3
Description.
                         sheAdslGroup 1.3.6.1.4.1.231.7.1.2.1.6.1.1.100.2.4
Description.
                         sheAdslControlGroup 1.3.6.1.4.1.231.7.1.2.1.6.1.1.100.2.5
Description.
                         sheAdslNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.6.1.1.100.2.6
Description.
                         sheAdslDualChanGroup 1.3.6.1.4.1.231.7.1.2.1.6.1.1.100.2.7
Description.
                         sheAdslObsoleteGroup 1.3.6.1.4.1.231.7.1.2.1.6.1.1.100.2.9
Description.
                         sheAdslObsoleteNotificationGroup 1.3.6.1.4.1.231.7.1.2.1.6.1.1.100.2.10
Description.