SCSPATMARP-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: SCSPATMARP-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 scspAtmarpMIB 1.3.6.1.3.2002
This module defines a portion of the management information base (MIB) for managing Server Cache Synchronizatio protocol applied to ATMARP servers.
           scspAtmarpObjects 1.3.6.1.3.2002.1
               scspAtmarpServerGroupTable 1.3.6.1.3.2002.1.1 no-access
The objects defined in this table are used to for the management of SCSP server groups with application to IP over ATM operation (Classic IP). These objects SHOULD be used along with the protocol independent part objects to support the management of the SCSP protocol applied to synchronizing the atmarp servers in a LIS. There is one entry in this table for each server group. In the case of IP over ATM, each server group corresponds to a Logical IP Subnet.
                   scspAtmarpServerGroupEntry 1.3.6.1.3.2002.1.1.1 no-access
Information about SCSP server group running IP over ATM operation. This table is indexed by scspServerGroupID and scspServerGroupPID. The two indeces point to a corresponding entry in the scspServerGroupTable.
                       scspAtmarpServerGroupNetMask 1.3.6.1.3.2002.1.1.1.1 ipaddress read-only
The subnet mask associated with this Server Group.
                       scspAtmarpServerGroupSubnetAddr 1.3.6.1.3.2002.1.1.1.2 ipaddress read-only
The IP subnet address associated with this Server Group.
                       scspAtmarpServerGroupRowStatus 1.3.6.1.3.2002.1.1.1.3 rowstatus read-only
This object allows Atmarp Server Group Table entries to be created and deleted from the scspAtmarpServerGroupTable. Note that scspAtmarpServerGroupTable entry creation and deletion is coupled with scspServerGroupTable entry creation and deletion. A scspAtmarpServerGroupTable entry cannot be created until its corresponding scspServerGroupTable entry is created. When a scspServerGroupTable entry is deleted, it also removes the corresponding scspAtmarpServerGroupTable entry.
               scspAtmarpLSTable 1.3.6.1.3.2002.1.2 no-access
The objects defined in this table are used to for the management of the Atmarp Local server in a SCSP server group for IP over ATM operation. These objects SHOULD be used along with the protocol independent part objects to support the management of the SCSP protocol applied to synchronizing the IP over ATM servers.
                   scspAtmarpLSEntry 1.3.6.1.3.2002.1.2.1 no-access
Information about Atmarp Local Server in a SCSP server group. This table is indexed by scspServerGroupID, scspServerGroupPID, and scspLSID. The three indeces point to a corresponding entry in the scspLSTable.
                       scspAtmarpLSLSIPAddr 1.3.6.1.3.2002.1.2.1.1 ipaddress read-only
The IP address of the Atmarp Local Server. Since an Atmarp server does not have to be assigned an IP address, this object is optional.
                       scspAtmarpLSLSAtmAddr 1.3.6.1.3.2002.1.2.1.2 atmaddr read-only
The ATM address of the Atmarp Local Server.
                       scspAtmarpLSRowStatus 1.3.6.1.3.2002.1.2.1.3 rowstatus read-only
This object allows Atmarp Local Server Table entries to be created and deleted from the scspAtmarpLSTable. Note that scspAtmarpLSTable entry creation and deletion is coupled with scspLSTable entry creation and deletion. A scspAtmarpLSTable entry cannot be created until its corresponding scspLSTable entry is created. When a scspLSTable entry is deleted, it also removes the corresponding scspAtmarpLSTable entry.
               scspAtmarpPeerTable 1.3.6.1.3.2002.1.3 no-access
The objects defined in this table are used to for the management of the ATMARP sever peers.
                   scspAtmarpPeerEntry 1.3.6.1.3.2002.1.3.1 no-access
Information about each peer ATMARP server participated in the scsp Server group. The table is indexed by scspServerGroupID, scspServerGroupPID, and scspAtmarpPeerIndex.
                       scspAtmarpPeerIndex 1.3.6.1.3.2002.1.3.1.1 integer32 read-only
The table index of the peer Atmarp server table.
                       scspAtmarpPeerIPAddr 1.3.6.1.3.2002.1.3.1.2 ipaddress read-only
The IP address of the peer Atmarp server. Since an Atmarp server does not have to be assigned an IP address, this object is optional.
                       scspAtmarpPeerAtmAddr 1.3.6.1.3.2002.1.3.1.3 atmaddr read-only
The ATM address of the Peer. If SVC is used between LS and Peer, Peer's ATM address should be valid. However, if PVC is used instead SVC, the Peer's ATM address may be a Null OCTET STRING.
                       scspAtmarpPeerVCType 1.3.6.1.3.2002.1.3.1.4 atmconnkind read-only
The type of the virtual circuit between LS and Peer.
                       scspAtmarpPeerVPI 1.3.6.1.3.2002.1.3.1.5 scspvpiinteger read-only
The VPI value for the virtual circuit between LS and Peer.
                       scspAtmarpPeerVCI 1.3.6.1.3.2002.1.3.1.6 scspvciinteger read-only
The VCI value for the virtual circuit between LS and Peer.
                       scspAtmarpPeerDCSID 1.3.6.1.3.2002.1.3.1.7 octet string read-only
The DCS ID for this peer. When the peer tabel is created, DCS ID may not have been discovered. Tt is set to a Null string. It will be update when the DCS ID associated with this peer (ATM address) is discovered.
                       scspAtmarpPeerRowStatus 1.3.6.1.3.2002.1.3.1.8 rowstatus read-only
This object allows Atmarp Peer table entries to be created and deleted from the scspAtmarpPeerTable. Note that scspAtmarpPeerTable entry is created when a peer is configured loaclly or when a peer not previously configured connects to LS.
               scspAtmarpHFSMTable 1.3.6.1.3.2002.1.4 no-access
The objects defined in this table are used to for the management of the HFSM between the LS and the DCS.
                   scspAtmarpHFSMEntry 1.3.6.1.3.2002.1.4.1 no-access
Information about SCSP HFSM session between the LS and its HFSMs. The table is indexed by scspServerGroupID, scspServerGroupPID, and scspAtmarpPeerIndex.
                       scspHFSMHFSMState 1.3.6.1.3.2002.1.4.1.1 scsphfsmstatetype read-only
The current state of the Hello Finite State Machine. The allowable states are: down(1), waiting(2), uniConn(3), biConn(4).
                       scspHFSMHelloIn 1.3.6.1.3.2002.1.4.1.2 counter32 read-only
The number of 'Hello' messages received from this HFSM.
                       scspHFSMHelloOut 1.3.6.1.3.2002.1.4.1.3 counter32 read-only
The number of 'Hello' messages sent from LS to this HFSM.
                       scspHFSMHelloInvalidIn 1.3.6.1.3.2002.1.4.1.4 counter32 read-only
The number of invalid 'Hello' messages received from this HFSM. Possible message errors include: Hello message when the HFSM is in 'Down' state; Hello message is too short to contain the number of Receiver ID records specified in the header, etc. Other common errors include failed authentication if applicable, errors in the message fields, etc.
                       scspHFSMHelloInterval 1.3.6.1.3.2002.1.4.1.5 integer32 read-only
This object contains the value for HelloInterval with the associated HFSM. It is the time (in seconds) between sending of consecutive Hello messages from the HFSM.
                       scspHFSMDeadFactor 1.3.6.1.3.2002.1.4.1.6 integer32 read-only
This object contains the value for DeadFactor with this associated server. The DeadFactor along with HelloInterval are contained in 'Hello' messages sent from this HFSM. If 'Hello' messages are not received from this HFSM within the time out interval 'HelloInterval*DeadFactor' (in seconds), then the HFSM MUST be considered to be stalled.
                       scspHFSMFamilyID 1.3.6.1.3.2002.1.4.1.7 integer32 read-only
The family ID is used to refer an aggregate of Protocol ID/SGID pairs. Only a single HFSM is run for all Protocol ID/SGID pairs assigned to a Family ID. When the HFSM is not shared by an aggregate of Protocol ID/SGID pairs, this object should be set to 0.
                       scspAtmarpHFSMRowStatus 1.3.6.1.3.2002.1.4.1.8 rowstatus read-only
This object allows Atmarp HFSM table entries to be created and deleted from the scspAtmarpHFSMTable. Note that scspAtmarpHFSMTable entry creation and deletion is closely coupled with scspHFSMTable entry creation. A scspAtmarpHFSMTable entry cannot be created until its corresponding scspHFSMTable entry is created. When a scspHFSMTable entry is deleted, it also removes the corresponding scspAtmarpHFSMTable entry.
           scspAtmarpNotifications 1.3.6.1.3.2002.2
               scspHFSMDown 1.3.6.1.3.2002.2.1
The Hello Finite State Machine associated with this LS/DCS pair enters 'Down' state.
               scspHFSMWaiting 1.3.6.1.3.2002.2.2
The Hello Finite State Machine associated with this LS/DCS pair enters 'Waiting' state.
               scspHFSMBiConn 1.3.6.1.3.2002.2.3
The Hello Finite State Machine associated with this LS/DCS pair enters 'Bidirectional connection' state.
           scspAtmarpConformance 1.3.6.1.3.2002.3
               scspAtmarpCompliances 1.3.6.1.3.2002.3.1
                   scspAtmarpCompliance 1.3.6.1.3.2002.3.1.1
The compliance statement for entities that are required for the management of SCSP when applied to ATMARP servers.
               scspAtmarpGroups 1.3.6.1.3.2002.3.2
                   scspAtmarpGroup 1.3.6.1.3.2002.3.2.1
This group is mandatory when Atmarp is the client/server protocol running SCSP.