SCHLEIFENBAUER-DATABUS-MIB: View SNMP OID List / Download MIB

VENDOR: SCHLEIFENBAUER PRODUCTS BV


 Home MIB: SCHLEIFENBAUER-DATABUS-MIB
Download as:   
SCHLEIFENBAUER-SMI, SNMPv2-CONF, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 schleifenbauerDatabusMIB 1.3.6.1.4.1.31034.12.1
This MIB describes the SNMP functions of network enabled databus devices. Copyright (c) 2016 by Schleifenbauer Holding BV
     sdbMIBNotifications 1.3.6.1.4.1.31034.12.1.0
         sdbDevSsDeviceStatusCodeChanged 1.3.6.1.4.1.31034.12.1.0.1
Device status code changed. OBJECTS { sdbDevSsDeviceStatusCode }
         sdbDevSsTemperatureAlertDetected 1.3.6.1.4.1.31034.12.1.0.2
Temperature alert detected. Internal temperature alert: OBJECTS { sdbDevSsTemperatureAlert, sdbDevMsIntTemperature, sdbDevMsIntTemperaturePeak } External analog temperature alert: OBJECTS { sdbDevSsTemperatureAlert, sdbDevMsExtTemperature, sdbDevMsExtTemperaturePeak } External digital temperature alert: OBJECTS { sdbDevSsTemperatureAlert, sdbDevSnsValue }
         sdbDevSsInputCurrentAlertDetected 1.3.6.1.4.1.31034.12.1.0.3
Input current alert detected. OBJECTS { sdbDevSsInputCurrentAlert, sdbDevInActualCurrent }
         sdbDevSsOutletCurrentAlertDetected 1.3.6.1.4.1.31034.12.1.0.4
Outlet current alert detected. OBJECTS { sdbDevSsOutletCurrentAlert, sdbDevOutMtActualCurrent }
         sdbDevSsInputVoltageAlertDetected 1.3.6.1.4.1.31034.12.1.0.5
Input voltage alert detected. OBJECTS { sdbDevSsInputVoltageAlert, sdbDevInActualVoltage }
         sdbDevSsOutletCurrentDropAlertDetected 1.3.6.1.4.1.31034.12.1.0.6
Outlet current drop alert detected. OBJECTS { sdbDevSsOutletCurrentDropAlert, sdbDevOutMtActualCurrent }
         sdbDevSsInputCurrentDropAlertDetected 1.3.6.1.4.1.31034.12.1.0.7
Input current drop alert detected. OBJECTS { sdbDevSsInputCurrentDropAlert, sdbDevInActualCurrent }
         sdbDevSsSensorChangeAlertDetected 1.3.6.1.4.1.31034.12.1.0.8
Sensor channel change alert detected. OBJECTS { sdbDevSsSensorChangeAlert }
         sdbMgmtStsRingStateChanged 1.3.6.1.4.1.31034.12.1.0.9
Ring state changed. Ring state changded to open: OBJECTS { sdbMgmtStsRingState, sdbMgmtStsRingBreachIndex } Ring state changded to closed: OBJECTS { sdbMgmtStsRingState }
         sdbDevSsOutletVoltageDropAlertDetected 1.3.6.1.4.1.31034.12.1.0.10
Outlet voltage drop alert detected. OBJECTS { sdbDevSsOutletVoltageDropAlert, sdbDevOutMtActualVoltage }
     sdbMIBObjects 1.3.6.1.4.1.31034.12.1.1
         sdbMgmt 1.3.6.1.4.1.31034.12.1.1.1
             sdbMgmtStatus 1.3.6.1.4.1.31034.12.1.1.1.1
                 sdbMgmtStsDevices 1.3.6.1.4.1.31034.12.1.1.1.1.1 integer32 read-only
The number of devices on the databus.
                 sdbMgmtStsAddressableDevices 1.3.6.1.4.1.31034.12.1.1.1.1.2 integer32 read-only
The number of devices on the databus addressable by snmp.
                 sdbMgmtStsNewDevices 1.3.6.1.4.1.31034.12.1.1.1.1.3 integer32 read-only
The number of new devices on the databus.
                 sdbMgmtStsDuplicateDevices 1.3.6.1.4.1.31034.12.1.1.1.1.4 integer32 read-only
The number of duplicate devices on the databus.
                 sdbMgmtStsRingState 1.3.6.1.4.1.31034.12.1.1.1.1.5 integer read-only
If the device is in a bridge-like mode, this will indicate the actual state of the databus. Enumeration: 'open': 0, 'closed': 1.
                 sdbMgmtStsRingBreachIndex 1.3.6.1.4.1.31034.12.1.1.1.1.6 integer32 read-only
Indicates the breach index if the current state of the data bus is open. If the data bus is closed this has no meaning.
             sdbMgmtControl 1.3.6.1.4.1.31034.12.1.1.1.2
                 sdbMgmtCtrlScan 1.3.6.1.4.1.31034.12.1.1.1.2.1 integer read-write
Perform a bus scan. To verify if scanning is completed the value of this object can be read. During the bus scan the value remains 1. When the bus scan completed the value will be 0. Enumeration: 'idle': 0, 'scan': 1.
                 sdbMgmtCtrlRenumberAllFromN 1.3.6.1.4.1.31034.12.1.1.1.2.2 integer32 read-write
Renumber all devices on the databus. If set to 0 all units will be set to 0. If set to another value, all units will be numbered in sequence starting from the value set.
                 sdbMgmtCtrlRenumberZeros 1.3.6.1.4.1.31034.12.1.1.1.2.3 integer read-write
Renumber all devices on the databus having address 0. Renumbering will be done in sequence. The sequence starts with the highest address found on the databus. Enumeration: 'idle': 0, 'renumber': 1.
                 sdbMgmtCtrlDevicesTable 1.3.6.1.4.1.31034.12.1.1.1.2.4 no-access
A table containing information of devices connected to the databus. The number of entries is given by the value of sdbMgmtStsDevices.
                     sdbMgmtCtrlDevicesEntry 1.3.6.1.4.1.31034.12.1.1.1.2.4.1 no-access
Information entry containing objects of a particular databus device.
                         sdbMgmtCtrlDevIndex 1.3.6.1.4.1.31034.12.1.1.1.2.4.1.1 integer32 no-access
A unique value for each device. Its value ranges between 1 and the value of sdbMgmtStsDevices with a maximum of 255. The value for each device will remain constant until the next scan is performed.
                         sdbMgmtCtrlDevUnitAddress 1.3.6.1.4.1.31034.12.1.1.1.2.4.1.2 integer32 read-write
User defined address. This will be used for addressing the device on the databus.
                         sdbMgmtCtrlDevHardwareAddress 1.3.6.1.4.1.31034.12.1.1.1.2.4.1.3 displaystring read-only
Hardware serial number. This cannot be changed. It can be used as backup unit address. format as 3 unsigned ints separated by dashes: int - int - int
                         sdbMgmtCtrlDevIsNew 1.3.6.1.4.1.31034.12.1.1.1.2.4.1.4 integer read-only
Indication if the device is new on the databus. Enumeration: 'yes': 1, 'no': 0.
                         sdbMgmtCtrlDevIsDuplicate 1.3.6.1.4.1.31034.12.1.1.1.2.4.1.5 integer read-only
Indication if the device is conflicting with another device on the databus. Enumeration: 'yes': 1, 'no': 0.
         sdbDevice 1.3.6.1.4.1.31034.12.1.1.2
             sdbDevIdentification 1.3.6.1.4.1.31034.12.1.1.2.1
                 sdbDevIdTable 1.3.6.1.4.1.31034.12.1.1.2.1.1 no-access
A table containing identification information of devices connected to the databus. The number of entries is given by the value of sdbMgmtStsAddressableDevices.
                     sdbDevIdEntry 1.3.6.1.4.1.31034.12.1.1.2.1.1.1 no-access
Information entry containing information objects of a particular databus device.
                         sdbDevIdSPDMVersion 1.3.6.1.4.1.31034.12.1.1.2.1.1.1.1 integer32 read-only
Data model version.
                         sdbDevIdFirmwareVersion 1.3.6.1.4.1.31034.12.1.1.2.1.1.1.2 integer32 read-only
The firmware revision number.
                         sdbDevIdBuildNumber 1.3.6.1.4.1.31034.12.1.1.2.1.1.1.3 displaystring read-only
Date and time the firmware was built.
                         sdbDevIdSalesOrderNumber 1.3.6.1.4.1.31034.12.1.1.2.1.1.1.4 displaystring read-only
SP sales order number.
                         sdbDevIdProductId 1.3.6.1.4.1.31034.12.1.1.2.1.1.1.5 displaystring read-only
SP product id.
                         sdbDevIdSerialNumber 1.3.6.1.4.1.31034.12.1.1.2.1.1.1.6 displaystring read-only
SP serial number.
                         sdbDevIdHardwareAddress 1.3.6.1.4.1.31034.12.1.1.2.1.1.1.7 displaystring read-only
Hardware serial number. This can not be changed. It can be used as backup unit address. Format as 3 unsigned ints separated by dashes (-) e.g. 12345-54321-00000
                         sdbDevIdMacAddress 1.3.6.1.4.1.31034.12.1.1.2.1.1.1.8 displaystring read-only
The MAC address. This can not be changed. It represents an 802 MAC address as if it were transmitted least significant bit first. Format as six groups of 2 hexadecimal digits separated by colons (:) e.g. D0:22:12:B0:00:00
                         sdbDevIdUnitAddress 1.3.6.1.4.1.31034.12.1.1.2.1.1.1.9 integer32 read-write
User defined address. This will be used for addressing the device on the databus.
                         sdbDevIdName 1.3.6.1.4.1.31034.12.1.1.2.1.1.1.10 displaystring read-write
User configurable device name or identifier.
                         sdbDevIdLocation 1.3.6.1.4.1.31034.12.1.1.2.1.1.1.11 displaystring read-write
User configurable device location identifier.
                         sdbDevIdVanityTag 1.3.6.1.4.1.31034.12.1.1.2.1.1.1.12 displaystring read-write
Characters to be displayed as vanity text in display.
                         sdbDevIdIndex 1.3.6.1.4.1.31034.12.1.1.2.1.1.1.13 integer32 no-access
A unique value for each device. Its value represents the unit address of the device and is used to address individual devices in the tree. The value for each device will remain constant until the next scan is performed.
             sdbDevConfiguration 1.3.6.1.4.1.31034.12.1.1.2.2
                 sdbDevCfTable 1.3.6.1.4.1.31034.12.1.1.2.2.1 no-access
A table containing configuration information of devices connected to the databus. The number of entries is given by the value of sdbMgmtStsAddressableDevices.
                     sdbDevCfEntry 1.3.6.1.4.1.31034.12.1.1.2.2.1.1 no-access
Configuration entry containing configuration objects of a particular databus device.
                         sdbDevCfPhases 1.3.6.1.4.1.31034.12.1.1.2.2.1.1.1 integer32 read-only
Number of phases for input metering.
                         sdbDevCfOutletsTotal 1.3.6.1.4.1.31034.12.1.1.2.2.1.1.2 integer32 read-only
Total number of outlets including hardwired without switch/metered modules.
                         sdbDevCfOutletsSwitched 1.3.6.1.4.1.31034.12.1.1.2.2.1.1.3 integer32 read-only
Number of switched outlets. If outlet numbering is non-contiguous its the highest outlet number.
                         sdbDevCfOutletsMetered 1.3.6.1.4.1.31034.12.1.1.2.2.1.1.4 integer32 read-only
Number of metered outlets. If outlet numbering is non-contiguous its the highest outlet number.
                         sdbDevCfSensors 1.3.6.1.4.1.31034.12.1.1.2.2.1.1.5 integer32 read-only
The number sensors.
                         sdbDevCfMaximumLoad 1.3.6.1.4.1.31034.12.1.1.2.2.1.1.6 integer32 read-only
Maximum rated load of device per phase
             sdbDevSystemStatus 1.3.6.1.4.1.31034.12.1.1.2.3
                 sdbDevSsTable 1.3.6.1.4.1.31034.12.1.1.2.3.1 no-access
A table containing system status information of devices connected to the databus. The number of entries is given by the value of sdbMgmtStsAddressableDevices.
                     sdbDevSsEntry 1.3.6.1.4.1.31034.12.1.1.2.3.1.1 no-access
System status entry containing system status objects of a particular databus device.
                         sdbDevSsDeviceStatusCode 1.3.6.1.4.1.31034.12.1.1.2.3.1.1.1 integer32 read-only
Returns an internal status or error code. A value of 0 means OK. If not 0 it can be any of the following codes. Multiple status codes can be active at the same time. The value will be the sum of the active status codes. 1 = alert flagged 2 = settings(s) initialized 4 = power-on reset 8 = external reset 16 = watchdog timer caused reset 32 = brownout detected 64 = controller error 128 = slave module was reset
                         sdbDevSsTemperatureAlert 1.3.6.1.4.1.31034.12.1.1.2.3.1.1.2 integer32 read-only
An alert has been raised due to temperature exceeding treshhold. 0 = no alert 1 = internal temperature sensor 2 = external temperature sensor
                         sdbDevSsInputCurrentAlert 1.3.6.1.4.1.31034.12.1.1.2.3.1.1.3 integer32 read-only
An alert has been raised due to current exceeding treshhold. The value indicates the exceeding phase. 0 = no alert.
                         sdbDevSsOutletCurrentAlert 1.3.6.1.4.1.31034.12.1.1.2.3.1.1.4 integer32 read-only
An alert has been raised due to current exceeding treshhold. The value indicates the exceeding outlet. 0 = no alert.
                         sdbDevSsInputVoltageAlert 1.3.6.1.4.1.31034.12.1.1.2.3.1.1.5 integer32 read-only
An alert has been raised due to a voltage dip. The value indicates the dipped phase. 0 = no alert.
                         sdbDevSsOutletCurrentDropAlert 1.3.6.1.4.1.31034.12.1.1.2.3.1.1.6 integer32 read-only
An alert has been raised due to the current of a metered outlet suddenly dropping to near zero, possibly indicating a blown fuse. The value indicates the dropped outlet. 0 = no alert.
                         sdbDevSsInputCurrentDropAlert 1.3.6.1.4.1.31034.12.1.1.2.3.1.1.7 integer32 read-only
An alert has been raised due to the current of a metered input suddenly dropping to near zero, possibly indicating a blown fuse. The value indicates the dropped phase. 0 = no alert.
                         sdbDevSsSensorChangeAlert 1.3.6.1.4.1.31034.12.1.1.2.3.1.1.8 integer32 read-only
An alert has been raised due to a change in the number of sensors. The value indicates the previous amount of sensors.
                         sdbDevSsOutletVoltageDropAlert 1.3.6.1.4.1.31034.12.1.1.2.3.1.1.9 integer32 read-only
An alert has been raised due to voltage drop on this outlet. The value indicates the first failed outlet.
             sdbDevReset 1.3.6.1.4.1.31034.12.1.1.2.4
                 sdbDevRsTable 1.3.6.1.4.1.31034.12.1.1.2.4.1 no-access
A table providing reset capabilities to devices connected to the databus. The number of entries is given by the value of sdbMgmtStsAddressableDevices.
                     sdbDevRsEntry 1.3.6.1.4.1.31034.12.1.1.2.4.1.1 no-access
Reset entry providing reset objects of a particular databus device.
                         sdbDevRsReboot 1.3.6.1.4.1.31034.12.1.1.2.4.1.1.1 integer read-write
Warm reboot/reset of device controller. NOTE: this will have NO effect on outlet status! Enumeration: 'idle': 0, 'reboot': 1.
                         sdbDevRsResetAlerts 1.3.6.1.4.1.31034.12.1.1.2.4.1.1.2 integer read-write
Reset all alert signals and device status code. Enumeration: 'reset': 1, 'idle': 0.
                         sdbDevRsZeroInputKWhSubtotal 1.3.6.1.4.1.31034.12.1.1.2.4.1.1.3 integer read-write
Reset of all input kWh subtotal counters to zero. Enumeration: 'idle': 0, 'zero': 1.
                         sdbDevRsZeroOutletKWhSubtotal 1.3.6.1.4.1.31034.12.1.1.2.4.1.1.4 integer read-write
Reset of all outlet kWh subtotal counter to zero. Enumeration: 'idle': 0, 'zero': 1.
                         sdbDevRsResetPeaksAndDips 1.3.6.1.4.1.31034.12.1.1.2.4.1.1.5 integer read-write
Reset all peak and dip values to zero. Enumeration: 'reset': 1, 'idle': 0.
             sdbDevSettings 1.3.6.1.4.1.31034.12.1.1.2.5
                 sdbDevStTable 1.3.6.1.4.1.31034.12.1.1.2.5.1 no-access
A table containing setting information of devices connected to the databus. The number of entries is given by the value of sdbMgmtStsAddressableDevices.
                     sdbDevStEntry 1.3.6.1.4.1.31034.12.1.1.2.5.1.1 no-access
Setting entry containing settings objects of a particular databus device.
                         sdbDevStAutoResetAlerts 1.3.6.1.4.1.31034.12.1.1.2.5.1.1.2 integer32 read-write
Auto reset alerts configuration. If set to 0 the auto reset alerts feature is disabled. If set to a value greater then 0, the auto reset alerts feature is enabled and alerts will get cleared after the configured amount of seconds since the last alert condition have passed.
                         sdbDevStExtendedNames 1.3.6.1.4.1.31034.12.1.1.2.5.1.1.3 integer read-write
Use original or longer names for inputs, outlets and sensors. Enumeration: 'disabled': 0, 'enabled': 1.
                         sdbDevStPeakDuration 1.3.6.1.4.1.31034.12.1.1.2.5.1.1.4 millisecond read-write
Amount of ms a current peak should last before an alert is raised.
                         sdbDevStFixedOutletDelay 1.3.6.1.4.1.31034.12.1.1.2.5.1.1.5 millisecond read-write
Minimal delay between two successive relay switches in milliseconds. Minimal delay is 100 ms. Will always be respected!
                         sdbDevStPowerSaverMode 1.3.6.1.4.1.31034.12.1.1.2.5.1.1.6 second read-write
Set backlight on time in seconds. 0 keeps display always on. Note that keeping the backlight on may decrease luminosity over time.
                         sdbDevStOutletPowerUpMode 1.3.6.1.4.1.31034.12.1.1.2.5.1.1.7 integer read-write
Behaviour of outlets on power-up. Enumeration: 'sameState': 1, 'sameStateDelayed': 2, 'off': 0.
                         sdbDevStMaximumTemperature 1.3.6.1.4.1.31034.12.1.1.2.5.1.1.8 integer32 read-write
Maximum temperature threshold An alert will be generated whenever the temperature is above this value. Zero means disabled.
                         sdbDevStDisplayOrientation 1.3.6.1.4.1.31034.12.1.1.2.5.1.1.9 integer read-write
Display orientation. Enumeration: 'verticalDisplayOnTop': 1, 'verticalDisplayUpsideDown': 2, 'noDisplay': 0, 'horizontalDisplayAtRight': 4, 'horizontalDisplayAtLeft': 3.
                         sdbDevStLocalAlertReset 1.3.6.1.4.1.31034.12.1.1.2.5.1.1.10 integer read-write
Allow alerts to be reset locally on device by pushing one of the buttons. Enumeration: 'allowed': 1, 'notAllowed': 0.
                         sdbDevStCurrentDropDetection 1.3.6.1.4.1.31034.12.1.1.2.5.1.1.11 integer read-write
Enables the current drop detection function. Enumeration: 'inputsAndOutlets': 3, 'outletsOnly': 2, 'off': 0, 'inputsOnly': 1.
             sdbDevInput 1.3.6.1.4.1.31034.12.1.1.2.6
                 sdbDevInTable 1.3.6.1.4.1.31034.12.1.1.2.6.1 no-access
A table containing information of inputs of devices connected to the databus.
                     sdbDevInEntry 1.3.6.1.4.1.31034.12.1.1.2.6.1.1 no-access
Inputs entry containing objects of an input of a particular databus device. Note that this table has two indexes. sdbDevIdIndex to identify a particular device and sdbDevInIndex to identify a particular input of the device identified by sdbDevIdIndex.
                         sdbDevInIndex 1.3.6.1.4.1.31034.12.1.1.2.6.1.1.1 integer32 no-access
A unique value for each input. Its value ranges between 1 and the value of sdbDevCfPhases.
                         sdbDevInKWhTotal 1.3.6.1.4.1.31034.12.1.1.2.6.1.1.2 kilowatthour read-only
Total kWh value of an input. This value can not be reset.
                         sdbDevInKWhSubtotal 1.3.6.1.4.1.31034.12.1.1.2.6.1.1.3 kilowatthour read-only
Subtotal kWh value of an input. This value can be reset.
                         sdbDevInPowerFactor 1.3.6.1.4.1.31034.12.1.1.2.6.1.1.4 decipercent read-only
Power factor of input. The power factor of an AC power system is defined as the ratio of the real or active power to the apparent power and is a number between 0 and 1. This value is expressed as a percentage between 0% and 100%.
                         sdbDevInActualCurrent 1.3.6.1.4.1.31034.12.1.1.2.6.1.1.5 deciampere read-only
Actual apparent, RMS current.
                         sdbDevInPeakCurrent 1.3.6.1.4.1.31034.12.1.1.2.6.1.1.6 deciampere read-only
Peak apparent, RMS current. Highest value since last reset of the alerts.
                         sdbDevInActualVoltage 1.3.6.1.4.1.31034.12.1.1.2.6.1.1.7 decivolt read-only
The actual voltage.
                         sdbDevInMinVoltage 1.3.6.1.4.1.31034.12.1.1.2.6.1.1.8 decivolt read-only
RMS voltage dip. Lowest value since reset of alerts.
                         sdbDevInPowerVoltAmpere 1.3.6.1.4.1.31034.12.1.1.2.6.1.1.9 integer32 read-only
Calculated apparent power.
                         sdbDevInPowerWatt 1.3.6.1.4.1.31034.12.1.1.2.6.1.1.10 integer32 read-only
Calculated real power.
                         sdbDevInMaxAmps 1.3.6.1.4.1.31034.12.1.1.2.6.1.1.11 deciampere read-write
Maximum current per input phase. Should last at least sdbDevStPeakDuration ms before triggering an alert.
                         sdbDevInCTRatio 1.3.6.1.4.1.31034.12.1.1.2.6.1.1.12 integer32 read-write
The multiplier to use for the input CTs.
                         sdbDevInName 1.3.6.1.4.1.31034.12.1.1.2.6.1.1.13 displaystring read-write
User configurable naming of inputs or phases.
                         sdbDevInZeroKWhSubtotal 1.3.6.1.4.1.31034.12.1.1.2.6.1.1.14 integer read-write
Reset input kWh subtotal counter of a single input to zero. Enumeration: 'idle': 0, 'zero': 1.
             sdbDevOutlet 1.3.6.1.4.1.31034.12.1.1.2.7
                 sdbDevOutTable 1.3.6.1.4.1.31034.12.1.1.2.7.1 no-access
A table containing information of outlets of devices connected to the databus.
                     sdbDevOutEntry 1.3.6.1.4.1.31034.12.1.1.2.7.1.1 no-access
Outlets entry containing objects of an outlet of a particular databus device. Note that this table has two indexes. sdbDevIdIndex to identify a particular device and sdbDevOutIndex to identify a particular outlet of the device identified by sdbDevIdIndex.
                         sdbDevOutIndex 1.3.6.1.4.1.31034.12.1.1.2.7.1.1.1 integer32 no-access
A unique value for each outlet. Its value ranges between 1 and the value of sdbDevCfOutletsTotal.
                         sdbDevOutName 1.3.6.1.4.1.31034.12.1.1.2.7.1.1.2 displaystring read-write
User configurable naming of individual outlets.
                 sdbDevOutMtTable 1.3.6.1.4.1.31034.12.1.1.2.7.2 no-access
A table containing information of metered outlets of devices connected to the databus.
                     sdbDevOutMtEntry 1.3.6.1.4.1.31034.12.1.1.2.7.2.1 no-access
Metered outlets entry containing objects of a metered outlet of a particular databus device. Note that this table has two indexes. sdbDevIdIndex to identify a particular device and sdbDevOutMtIndex to identify a particular outlet of the device identified by sdbDevIdIndex.
                         sdbDevOutMtIndex 1.3.6.1.4.1.31034.12.1.1.2.7.2.1.1 integer32 no-access
A unique value for each outlet. Its value ranges between 1 and the value of sdbDevCfOutletsMetered.
                         sdbDevOutMtKWhTotal 1.3.6.1.4.1.31034.12.1.1.2.7.2.1.2 kilowatthour read-only
Total kWh value of an outlet. This value can not be reset.
                         sdbDevOutMtKWhSubtotal 1.3.6.1.4.1.31034.12.1.1.2.7.2.1.3 kilowatthour read-only
Subotal kWh value of an outlet. This value can be reset.
                         sdbDevOutMtPowerFactor 1.3.6.1.4.1.31034.12.1.1.2.7.2.1.4 decipercent read-only
Power factor of outlet. The power factor of an AC power system is defined as the ratio of the real or active power to the apparent power and is a number between 0 and 1. This number is expressed as a percentage between 0% and 100%.
                         sdbDevOutMtActualCurrent 1.3.6.1.4.1.31034.12.1.1.2.7.2.1.5 deciampere read-only
Actual apparent, RMS current.
                         sdbDevOutMtPeakCurrent 1.3.6.1.4.1.31034.12.1.1.2.7.2.1.6 deciampere read-only
Peak apparent, RMS current. Highest value since last reset of the alerts.
                         sdbDevOutMtActualVoltage 1.3.6.1.4.1.31034.12.1.1.2.7.2.1.7 decivolt read-only
Actual voltage on outlet.
                         sdbDevOutMtMaxAmps 1.3.6.1.4.1.31034.12.1.1.2.7.2.1.8 deciampere read-write
Maximum current per outlet. Should last at least sdbDevStPeakDuration ms before triggering an alert.
                         sdbDevOutMtCTRatio 1.3.6.1.4.1.31034.12.1.1.2.7.2.1.9 integer32 read-write
The multiplier to use for the outlet CTs.
                         sdbDevOutMtPowerVoltAmpere 1.3.6.1.4.1.31034.12.1.1.2.7.2.1.10 integer32 read-only
Calculated apparent power.
                         sdbDevOutMtPowerWatt 1.3.6.1.4.1.31034.12.1.1.2.7.2.1.11 integer32 read-only
Calculated real power.
                 sdbDevOutSwTable 1.3.6.1.4.1.31034.12.1.1.2.7.3 no-access
A table containing information of switched outlets of devices connected to the databus.
                     sdbDevOutSwEntry 1.3.6.1.4.1.31034.12.1.1.2.7.3.1 no-access
Switched outlets entry containing objects of a switched outlet of a particular databus device. Note that this table has two indexes. sdbDevIdIndex to identify a particular device and sdbDevOutSwIndex to identify a particular outlet of the device identified by sdbDevIdIndex.
                         sdbDevOutSwIndex 1.3.6.1.4.1.31034.12.1.1.2.7.3.1.1 integer32 no-access
A unique value for each outlet. Its value ranges between 1 and the value of sdbDevCfOutletsSwitched.
                         sdbDevOutSwCurrentState 1.3.6.1.4.1.31034.12.1.1.2.7.3.1.2 integer read-write
The actual state of the outlet relay. Note that Writing is only effective after setting sdbDevOutSwUnlock. Enumeration: 'on': 1, 'off': 0.
                         sdbDevOutSwScheduled 1.3.6.1.4.1.31034.12.1.1.2.7.3.1.3 integer read-only
A one indicates pending activity; the switch delay has not yet expired. Enumeration: 'scheduled': 1, 'idle': 0.
                         sdbDevOutSwUnlock 1.3.6.1.4.1.31034.12.1.1.2.7.3.1.4 integer read-write
Switching and rebooting is unlocked for 10 seconds by writing a 1. Enumeration: 'locked': 0, 'unlocked': 1.
                         sdbDevOutSwIndividualOutletDelay 1.3.6.1.4.1.31034.12.1.1.2.7.3.1.5 second read-write
Delay before an individual outlet switches on at power-up.
                         sdbDevOutSwReboot 1.3.6.1.4.1.31034.12.1.1.2.7.3.1.6 integer read-write
Reboot outlet relay if current state is on and outlet is unlocked; The outlet will be turned on after 10 seconds. Enumeration: 'idle': 0, 'reboot': 1.
             sdbDevSensor 1.3.6.1.4.1.31034.12.1.1.2.8
                 sdbDevMeasuresTable 1.3.6.1.4.1.31034.12.1.1.2.8.1 no-access
A table containing information of temperatures of devices connected to the databus.
                     sdbDevMeasuresEntry 1.3.6.1.4.1.31034.12.1.1.2.8.1.1 no-access
Device measures entry containing temperature information objects of a particular databus device.
                         sdbDevMsIntTemperature 1.3.6.1.4.1.31034.12.1.1.2.8.1.1.1 decicelsius read-only
Actual internal device temperature in deg C
                         sdbDevMsExtTemperature 1.3.6.1.4.1.31034.12.1.1.2.8.1.1.2 decicelsius read-only
Actual external device temperature sensor in deg C.
                         sdbDevMsIntTemperaturePeak 1.3.6.1.4.1.31034.12.1.1.2.8.1.1.3 decicelsius read-only
Peak internal device temperature since last reset of alerts.
                         sdbDevMsExtTemperaturePeak 1.3.6.1.4.1.31034.12.1.1.2.8.1.1.4 decicelsius read-only
Peak external device temperature since last reset of alerts.
                 sdbDevSnsTable 1.3.6.1.4.1.31034.12.1.1.2.8.2 no-access
A table containing information of sensors of devices connected to the databus.
                     sdbDevSnsEntry 1.3.6.1.4.1.31034.12.1.1.2.8.2.1 no-access
Sensors entry containing objects of a sensor of a particular databus device. Note that this table has two indexes. sdbDevIdIndex to identify a particular device and sdbDevSnsIndex to identify a particular sensor of the device identified by sdbDevIdIndex.
                         sdbDevSnsIndex 1.3.6.1.4.1.31034.12.1.1.2.8.2.1.1 integer32 no-access
A unique value for each sensor. Its value ranges between 1 and the value of sdbDevCfSensors.
                         sdbDevSnsType 1.3.6.1.4.1.31034.12.1.1.2.8.2.1.2 displaystring read-only
Type of connected sensor. T = Temperature (C) H = Humidity (%) I = dry switch contact
                         sdbDevSnsValue 1.3.6.1.4.1.31034.12.1.1.2.8.2.1.3 decivalue read-only
Value of connected sensor
                         sdbDevSnsName 1.3.6.1.4.1.31034.12.1.1.2.8.2.1.4 displaystring read-write
User definable name for sensors.
     sdbMIBConformance 1.3.6.1.4.1.31034.12.1.2
         sdbMIBCompliances 1.3.6.1.4.1.31034.12.1.2.1
             sdbMIBCompliance 1.3.6.1.4.1.31034.12.1.2.1.1
The requirements for conformance to the SCHLEIFENBAUER-DATABUS-MIB.
         sdbMIBGroups 1.3.6.1.4.1.31034.12.1.2.2
             sdbMIBNotificationGroup 1.3.6.1.4.1.31034.12.1.2.2.1
A collection of notifications.
             sdbMIBDevIdGroup 1.3.6.1.4.1.31034.12.1.2.2.3
A collection of objects providing identification information about the device.
             sdbMIBDevCfGroup 1.3.6.1.4.1.31034.12.1.2.2.4
A collection of objects providing configuration information about the device.
             sdbMIBDevSsGroup 1.3.6.1.4.1.31034.12.1.2.2.5
A collection of objects providing status information about the device.
             sdbMIBDevRsGroup 1.3.6.1.4.1.31034.12.1.2.2.6
Groups resettable attributes op the device.
             sdbMIBDevStGroup 1.3.6.1.4.1.31034.12.1.2.2.7
A collection of objects providing the actual settings about the device.
             sdbMIBDevInGroup 1.3.6.1.4.1.31034.12.1.2.2.8
A collection of objects providing the actual input measurements of the device.
             sdbMIBDevOutGroup 1.3.6.1.4.1.31034.12.1.2.2.9
A collection of objects providing the actual outlet measurements of the device.
             sdbMIBDevOutMtGroup 1.3.6.1.4.1.31034.12.1.2.2.10
A collection of objects providing the actual outlet measurements of the device.
             sdbMIBDevOutSwGroup 1.3.6.1.4.1.31034.12.1.2.2.11
A collection of objects providing the actual outlet measurements of the device.
             sdbMIBDevSensorGroup 1.3.6.1.4.1.31034.12.1.2.2.12
A collection of objects providing the actual environmental measurements of the device.
             sdbMIBMgmtStatusGroup 1.3.6.1.4.1.31034.12.1.2.2.13
A collection of objects providing management status information about the databus.
             sdbMIBMgmtControlGroup 1.3.6.1.4.1.31034.12.1.2.2.14
A collection of objects providing management control information about the databus.