SALIX-DS1-MIB: View SNMP OID List / Download MIB

VENDOR: SALIX TECHNOLOGIES


 Home MIB: SALIX-DS1-MIB
Download as:   
SNMPv2-CONF, ENTITY-MIB, SNMPv2-SMI, SALIX-MIB, ATM-FORUM-M4-MIB, HOST-RESOURCES-MIB, DS1-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 salixDsx1MIB 1.3.6.1.4.1.2158.2.7
The MIB describing objects relating to DS1 interfaces, specifically items that augment objects from the DS1-MIB
     salixDsx1MIBObjects 1.3.6.1.4.1.2158.2.7.1
         salixDsx1ConfigTable 1.3.6.1.4.1.2158.2.7.1.1 no-access
The SALIX DS1 config table This table augments the dsx1ConfigTable defined in the DS1 MIB.
             salixDsx1ConfigEntry 1.3.6.1.4.1.2158.2.7.1.1.1 no-access
An entry in the SALIX DS1 config table. This entry containts SALIX specific DS1 configuration objects
                 salixDsx1ContinuityTestType 1.3.6.1.4.1.2158.2.7.1.1.1.1 integer read-write
The type of continuity test that should be setup. An entry exists for every DS1 in the system. This object is consulted when IPDC is requested to setup a continuity test. Since this value is specified in SGCP, it is not consulted if the SGCP protocol is used. Writing to this value has the effect that it changes the continuity test type for any subsequently setup continuity tests. Any tests currently in progress are not effected by changing this object. Enumeration: 'transponder': 2, 'loopback': 1.
                 salixDsx1DChannelPresent 1.3.6.1.4.1.2158.2.7.1.1.1.2 truthvalue read-write
An indication of whether channel 24 of the DS1 is reserved for D channel signaling.
                 salixDsx1AutoInitiateState 1.3.6.1.4.1.2158.2.7.1.1.1.3 truthvalue read-write
An indication of whether the D channel data link control (layer 2) should be initiated automatically during DS1 initialization or brought up on demand. This attribute is only relevant if salixDsx1DChannelPresent is 'true'.
                 salixDsx1DChannelMode 1.3.6.1.4.1.2158.2.7.1.1.1.4 integer read-write
An indication of whether the D Channel (if present) on the given DS1 should be configured as 'user mode' or as 'network mode'. This attributes is only used if the salixDsx1DChannelPresent field is set to 'true' Enumeration: 'networkMode': 2, 'userMode': 1.
                 salixDsx1RobbedBitSignalling 1.3.6.1.4.1.2158.2.7.1.1.1.5 integer read-write
An indication of whether the 'ABCD' bits of the DS0s in the DS1 should be configured for robbed bit signalling. Enumeration: 'offHook': 2, 'none': 0, 'onHook': 1, 'ringing': 3.
                 salixDsx1TDMEchoCancellation 1.3.6.1.4.1.2158.2.7.1.1.1.7 integer read-write
An indication of whether echo cancellation should be applied to the DS0s in the DS1. echoCancel16ms - 16 millisecond echo cancellation tail length echoCancel32ms - 32 millisecond echo cancellation tail length echoCancel63ms - 63 millisecond echo cancellation tail length Enumeration: 'echoCancel32ms': 2, 'none': 0, 'echoCancel63ms': 3, 'echoCancel16ms': 1.
     salixDsx1MIBTraps 1.3.6.1.4.1.2158.2.7.2
         salixDsx1MIBTrapPrefix 1.3.6.1.4.1.2158.2.7.2.0
     salixDsx1MIBCompliance 1.3.6.1.4.1.2158.2.7.3
         salixDs1Groups 1.3.6.1.4.1.2158.2.7.3.1
             salixDs1Group 1.3.6.1.4.1.2158.2.7.3.1.1
Salix DS1 Objects Group
         salixDs1Compliances 1.3.6.1.4.1.2158.2.7.3.2
             salixDs1Compliance 1.3.6.1.4.1.2158.2.7.3.2.1
The basic implementation requirements for the SALIX-DS1-MIB.