SAF-INTEGRAE-MIB: View SNMP OID List / Download MIB

VENDOR: SAF TEHNIKA


 Home MIB: SAF-INTEGRAE-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 integraE 1.3.6.1.4.1.7571.100.1.1.7.9
SAF Integra-E device management base
     integraEtimestamp 1.3.6.1.4.1.7571.100.1.1.7.9.1 dateandtime read-only
Last data update time
     integraEradio 1.3.6.1.4.1.7571.100.1.1.7.9.2
         integraEradioTxPower 1.3.6.1.4.1.7571.100.1.1.7.9.2.1 integer32 read-write
Output power of radio transmitter
         integraEradioTxFrequency 1.3.6.1.4.1.7571.100.1.1.7.9.2.2 integer32 read-write
Frequency of radio transmitter
         integraEradioRxLevel 1.3.6.1.4.1.7571.100.1.1.7.9.2.3 integer32 read-only
Level of the received signal
         integraEradioSide 1.3.6.1.4.1.7571.100.1.1.7.9.2.4 integer read-only
Radio side: Low/High Enumeration: 'high': 1, 'low': 2, 'error': 3.
         integraEradioTxMute 1.3.6.1.4.1.7571.100.1.1.7.9.2.5 integer read-only
Status of 'Tx mute' 1 - Tx is muted, 2 - Tx is not muted. 3 - Status information unavailable Enumeration: 'on': 1, 'off': 2, 'error': 3.
         integraEradioDuplexShift 1.3.6.1.4.1.7571.100.1.1.7.9.2.6 integer32 read-only
Utilized duplex shift in kHz
         integraEradioRxFrequency 1.3.6.1.4.1.7571.100.1.1.7.9.2.7 integer32 read-only
Frequency of radio receiver
         integraEradioTemperature 1.3.6.1.4.1.7571.100.1.1.7.9.2.8 fixeddiv10 read-only
Radio module temperature
         integraEradioTxMuteDuration 1.3.6.1.4.1.7571.100.1.1.7.9.2.9 integer32 read-write
Time remaning for Tx to be muted in seconds. To turn mute on send number of seconds between 10 and MAX. To turn mute off send 0. GET will retrieve remaining duration for mute or 0 if Tx mute is turned off.
         integraEradioRangesTable 1.3.6.1.4.1.7571.100.1.1.7.9.2.10 no-access
Network interface port status data.
               integraEradioRangeEntry 1.3.6.1.4.1.7571.100.1.1.7.9.2.10.1 no-access
An entry containing network physical port status info.
                   integraEradioRangeEntryIndex 1.3.6.1.4.1.7571.100.1.1.7.9.2.10.1.1 integer32 read-only
A unique value, greater than zero, for each range entry. Starts with 1 and is equal to a number of all range parameters.
                   integraEradioRangeDescr 1.3.6.1.4.1.7571.100.1.1.7.9.2.10.1.2 displaystring read-only
'Minimal' and 'maximal' labels
                   integraEradioRangeTxPower 1.3.6.1.4.1.7571.100.1.1.7.9.2.10.1.3 integer32 read-only
Output power ranges for radio transmitter
                   integraEradioRangeTxFrequency 1.3.6.1.4.1.7571.100.1.1.7.9.2.10.1.4 integer32 read-only
Frequency ranges for radio transmitter
         integraEradioPLL 1.3.6.1.4.1.7571.100.1.1.7.9.2.11 integer read-only
PLL state of local-oscillator generator Enumeration: 'ok': 2, 'error': 1.
         integraEradioRxLevelState 1.3.6.1.4.1.7571.100.1.1.7.9.2.12 integer read-only
Received signal level state Enumeration: 'high': 3, 'ok': 1, 'low': 2, 'error': 4.
         integraEradioAtpcState 1.3.6.1.4.1.7571.100.1.1.7.9.2.13 integer read-only
ATPC state Enumeration: 'on': 2, 'off': 1, 'unknown': 3.
         integraEradioAtpcUpdatePeriod 1.3.6.1.4.1.7571.100.1.1.7.9.2.14 integer32 read-only
ATPC update period
         integraEradioAtpcRxLevelMin 1.3.6.1.4.1.7571.100.1.1.7.9.2.15 integer32 read-only
ATPC Minimal level of the received signal
         integraEradioAtpcRxLevelMax 1.3.6.1.4.1.7571.100.1.1.7.9.2.16 integer32 read-only
ATPC Maximal level of the received signal
     integraEmodem 1.3.6.1.4.1.7571.100.1.1.7.9.3
         integraEmodemAcquireStatus 1.3.6.1.4.1.7571.100.1.1.7.9.3.1 integer read-only
This is the current status of modem data acquire when queried modem status. For detailed info use modemAcquireLastStatusDetails. Enumeration: 'acquireLocked': 2, 'acquireInProgress': 1, 'acquireFailed': 3.
         integraEmodemNormalizedMse 1.3.6.1.4.1.7571.100.1.1.7.9.3.2 fixeddiv10 read-only
Current normalized MSE value
         integraEmodemFECload 1.3.6.1.4.1.7571.100.1.1.7.9.3.3 fixeddiv10 read-only
Decoder stress or FEC load value
         integraEmodemFEClocked 1.3.6.1.4.1.7571.100.1.1.7.9.3.4 integer read-only
FEC locked status Enumeration: 'unknown': 3, 'yes': 2, 'no': 1.
         integraEmodemAcquireLastStatusDetails 1.3.6.1.4.1.7571.100.1.1.7.9.3.5 integer read-only
This is the last status of successfull or unsuccessful modem data acquire Enumeration: 'acquireMSEerror': 5, 'acquireLocked': 1, 'acquireSweep': 4, 'acquireSMerror': 13, 'acquireStopped': 12, 'acquireBITerror': 6.
         integraEmodemTemperature 1.3.6.1.4.1.7571.100.1.1.7.9.3.6 fixeddiv10 read-only
Modem DSP temperature
         integraEmodemBandwidth 1.3.6.1.4.1.7571.100.1.1.7.9.3.7 integer32 read-only
Signal bandwidth
         integraEmodemModulation 1.3.6.1.4.1.7571.100.1.1.7.9.3.8 displaystring read-only
Modulation (preferred)
         integraEmodemRxModulation 1.3.6.1.4.1.7571.100.1.1.7.9.3.9 displaystring read-only
Current (actual) Rx Modulation
         integraEmodemTxModulation 1.3.6.1.4.1.7571.100.1.1.7.9.3.10 displaystring read-only
Current (actual) Tx Modulation
         integraEmodemRxCapacity 1.3.6.1.4.1.7571.100.1.1.7.9.3.11 integer32 read-only
Rx ethernet capacity in kilobits per second
         integraEmodemTxCapacity 1.3.6.1.4.1.7571.100.1.1.7.9.3.12 integer32 read-only
Tx ethernet capacity in kilobits per second
         integraEmodemACMBengine 1.3.6.1.4.1.7571.100.1.1.7.9.3.13 integer read-only
ACMB engine status Enumeration: 'disabled': 2, 'enabled': 1, 'error': 3.
         integraEmodemCarrierOffset 1.3.6.1.4.1.7571.100.1.1.7.9.3.14 integer32 read-only
Modem carrier offset
         integraEmodemCountTime 1.3.6.1.4.1.7571.100.1.1.7.9.3.15 counter64 read-only
Modem performance count time
         integraEmodemErroredBlock 1.3.6.1.4.1.7571.100.1.1.7.9.3.16 counter64 read-only
Modem performance errored blocks
         integraEmodemErroredSecond 1.3.6.1.4.1.7571.100.1.1.7.9.3.17 counter64 read-only
Modem performance errored seconds
         integraEmodemSeverelyErroredSecond 1.3.6.1.4.1.7571.100.1.1.7.9.3.18 counter64 read-only
Modem performance severely errored seconds
         integraEmodemBackgroundBlockError 1.3.6.1.4.1.7571.100.1.1.7.9.3.19 counter64 read-only
Modem performance background block errors
         integraEmodemTotalBlockNumber 1.3.6.1.4.1.7571.100.1.1.7.9.3.20 counter64 read-only
Modem performance total block number
         integraEmodemErroredSecondRatio 1.3.6.1.4.1.7571.100.1.1.7.9.3.21 displaystring read-only
Modem performance errored second ratio
         integraEmodemSeverelyErroredSecondRatio 1.3.6.1.4.1.7571.100.1.1.7.9.3.22 displaystring read-only
Modem performance severely errored second ratio
         integraEmodemBackgroundBlockErrorRatio 1.3.6.1.4.1.7571.100.1.1.7.9.3.23 displaystring read-only
Modem performance background block error ratio
         integraEmodemUptime 1.3.6.1.4.1.7571.100.1.1.7.9.3.24 counter64 read-only
Modem performance : uptime
         integraEmodemUnavailtime 1.3.6.1.4.1.7571.100.1.1.7.9.3.25 counter64 read-only
Modem performance : unavailtime
         integraEmodemModulationACMBmin 1.3.6.1.4.1.7571.100.1.1.7.9.3.26 displaystring read-only
Minimal modulation for ACMB enabled profile
         integraEmodemModulationACMBmax 1.3.6.1.4.1.7571.100.1.1.7.9.3.27 displaystring read-only
Maximal modulation for ACMB enabled profile
     integraEsystem 1.3.6.1.4.1.7571.100.1.1.7.9.4
         integraEsysCPUtemperature 1.3.6.1.4.1.7571.100.1.1.7.9.4.2 fixeddiv10 read-only
System CPU temperature
         integraEsysLicenseExpire 1.3.6.1.4.1.7571.100.1.1.7.9.4.3 gauge32 read-only
License expires after number of seconds. In the case of -1, check licenseGenStatus status
         integraEsysLicenseGenStatus 1.3.6.1.4.1.7571.100.1.1.7.9.4.4 integer read-only
License General status. Enumeration: 'expired': 2, 'unlimitedTime': 4, 'ok': 1, 'unknown': 3.
         integraEsysPSUvoltage 1.3.6.1.4.1.7571.100.1.1.7.9.4.5 integer32 read-only
Power voltage in mV
         integraEsysPSUcurrent 1.3.6.1.4.1.7571.100.1.1.7.9.4.6 integer32 read-only
Power current in mA
         integraEsysPSUpower 1.3.6.1.4.1.7571.100.1.1.7.9.4.7 integer32 read-only
Power consumption in mW
         integraEsysBoardTemperature 1.3.6.1.4.1.7571.100.1.1.7.9.4.8 fixeddiv10 read-only
System temperature
         integraEsysFreeMemory 1.3.6.1.4.1.7571.100.1.1.7.9.4.9 fixeddiv10 read-only
System free memory
         integraEsysCPUidle 1.3.6.1.4.1.7571.100.1.1.7.9.4.10 fixeddiv10 read-only
System CPU idle
         integraEsysDeviceType 1.3.6.1.4.1.7571.100.1.1.7.9.4.11 displaystring read-only
Device type name
         integraEsysDeviceSerial 1.3.6.1.4.1.7571.100.1.1.7.9.4.12 displaystring read-only
Device serial number
         integraEsysDeviceProductModel 1.3.6.1.4.1.7571.100.1.1.7.9.4.13 displaystring read-only
Device product model code
         integraEsysFanError 1.3.6.1.4.1.7571.100.1.1.7.9.4.14 bits read-only
Device fan 1 error status Bits: 'fan1': 1, 'unknown': 3, 'no': 0.
         integraEsysXADCtemperature 1.3.6.1.4.1.7571.100.1.1.7.9.4.15 fixeddiv10 read-only
XADC Temperature
         integraEsysVCCint 1.3.6.1.4.1.7571.100.1.1.7.9.4.16 fixeddiv20 read-only
Vcc INT
         integraEsysVCCaux 1.3.6.1.4.1.7571.100.1.1.7.9.4.17 fixeddiv20 read-only
Vcc AUX
         integraEsysVCCbram 1.3.6.1.4.1.7571.100.1.1.7.9.4.18 fixeddiv20 read-only
Vcc BRAM
         integraEsysVCCpint 1.3.6.1.4.1.7571.100.1.1.7.9.4.19 fixeddiv20 read-only
Vcc PINT
         integraEsysVCCpaux 1.3.6.1.4.1.7571.100.1.1.7.9.4.20 fixeddiv20 read-only
Vcc PAUX
         integraEsysVCCoddr 1.3.6.1.4.1.7571.100.1.1.7.9.4.21 fixeddiv20 read-only
Vcc ODDR
         integraEsysXadc6v0AvddMdmAna 1.3.6.1.4.1.7571.100.1.1.7.9.4.22 fixeddiv20 read-only
XADC_6V0_AVDD_M - Modem Analog
         integraEsysXadc1v0AvddSwAna 1.3.6.1.4.1.7571.100.1.1.7.9.4.23 fixeddiv20 read-only
XADC_1V0_AVDD_S - Switch Analog
         integraEsysXadc1v0AvddMdmAna 1.3.6.1.4.1.7571.100.1.1.7.9.4.24 fixeddiv20 read-only
XADC_1V0_AVDD_M - Modem Analog
         integraEsysXadc1v0DvddMdmDig 1.3.6.1.4.1.7571.100.1.1.7.9.4.25 fixeddiv20 read-only
XADC_1V0_DVDD_M - Modem Digital
         integraEsysXadc1v0CoreMdmDig 1.3.6.1.4.1.7571.100.1.1.7.9.4.26 fixeddiv20 read-only
XADC_1V0_CORE_M - Modem Digital
         integraEsysXadc2v5EnvAdcAvddMdmAna 1.3.6.1.4.1.7571.100.1.1.7.9.4.27 fixeddiv20 read-only
XADC_2V5_ENVADC_AVDD - Modem Analog
         integraEsysXadc1v0CoreSwDig 1.3.6.1.4.1.7571.100.1.1.7.9.4.28 fixeddiv20 read-only
XADC_1V0_CORE_S - Switch Digital
         integraEsysXadc5v0IqAvddMdmAna 1.3.6.1.4.1.7571.100.1.1.7.9.4.29 fixeddiv20 read-only
XADC_5V0_IQ_AVDD - Modem Analog
         integraEsysXadc2v5WbDacClAvddMdmAna 1.3.6.1.4.1.7571.100.1.1.7.9.4.30 fixeddiv20 read-only
XADC_2V5_WBDAC_CL_AVDD - Modem Analog
         integraEsysXadc1v2VccPhyDig 1.3.6.1.4.1.7571.100.1.1.7.9.4.31 fixeddiv20 read-only
XADC_1V2_VCC - PHY Digital
         integraEsysXadc4v6AfeDacAvddMdmAna 1.3.6.1.4.1.7571.100.1.1.7.9.4.32 fixeddiv20 read-only
XADC_4V6_AFE_DAC_AVDD - Modem Analog
         integraEsysXadc2v5WbDacAvddMdmAna 1.3.6.1.4.1.7571.100.1.1.7.9.4.33 fixeddiv20 read-only
XADC_2V5_WBDAC_AVDD - Modem Analog
         integraEsysXadc2v5VccSysDig 1.3.6.1.4.1.7571.100.1.1.7.9.4.34 fixeddiv20 read-only
XADC_2V5_VCC - System Digital
         integraEsysXadc3v3VccSysDig 1.3.6.1.4.1.7571.100.1.1.7.9.4.35 fixeddiv20 read-only
XADC_3V3_VCC - System Digital
         integraEsysXadc1v5Ddr3Sw 1.3.6.1.4.1.7571.100.1.1.7.9.4.36 fixeddiv20 read-only
XADC_1V5_DDR3_S - Switch DDR3
         integraEsysXadc2v5WbAdcAvddMdmAna 1.3.6.1.4.1.7571.100.1.1.7.9.4.37 fixeddiv20 read-only
XADC_2V5_WBADC_AVDD - Modem Analog
         integraEsysXadc2v5WbDacPllAvddMdmAna 1.3.6.1.4.1.7571.100.1.1.7.9.4.38 fixeddiv20 read-only
XADC_2V5_WBDAC_PLL_AVDD - Modem Analog
     integraEethernet 1.3.6.1.4.1.7571.100.1.1.7.9.5
         integraEifStatusTable 1.3.6.1.4.1.7571.100.1.1.7.9.5.1 no-access
Network interface port status data.
             integraEifPortEntry 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1 no-access
An entry containing network physical port status info.
                 integraEifPortStatIndex 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.1 integer32 read-only
A unique value, greater than zero, for each physical network interface. It is recommended that values are assigned contiguously starting from 1.
                 integraEifPortStatDescr 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.2 displaystring read-only
Physical network interface description. LAN1 is electrical, LAN2 and LAN3 are SFP and WAN is radio port.
                 integraEifPortType 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.3 ianaiftype read-only
The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
                 integraEifPortMtu 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.4 integer32 read-only
Maximum transmission unit value in bytes.
                 integraEifPortHighSpeed 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.5 gauge32 read-only
Link speed in 1 000 000 * bits per second.
                 integraEifPortPhysAddress 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.6 physaddress read-only
The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length.
                 integraEifPortAdminStatus 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.7 integer read-only
Desired state of network interfaces. Interfaces can be enabled(1), disabled(2), unknown(3) (no info received). Enumeration: 'disabled': 2, 'unknown': 3, 'enabled': 1.
                 integraEifPortOperStatus 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.8 integer read-only
Actual state of interfaces. Link can be up(1), down(2) or in unknown(3) state. Enumeration: 'down': 2, 'unknown': 3, 'up': 1.
                 integraEifPortLastChange 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.9 timeticks read-only
This parameter value is always 0 at the moment.
                 integraEifPortAutoneg 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.10 integer read-only
Auto-negotiation status. Unknown means no info was received. Enumeration: 'disabled': 2, 'unknown': 3, 'enabled': 1.
                 integraEifPortDuplex 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.11 integer read-only
Duplex status for the interface. Enumeration: 'unknown': 3, 'full': 1, 'half': 2.
                 integraEifPortSyncEthActive 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.12 integer read-only
Synchronous Ethernet status. Can be active(1) or inactive(0). Enumeration: 'on': 1, 'off': 0.
                 integraEifPortSyncEthPrio 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.13 integer32 read-only
Synchronous Ethernet priority.
                 integraEifPortFlowControl 1.3.6.1.4.1.7571.100.1.1.7.9.5.1.1.14 integer read-only
Flow control status. Enumeration: 'disabled': 2, 'unknown': 3, 'enabled': 1.
         integraEifStatisticsTable 1.3.6.1.4.1.7571.100.1.1.7.9.5.2 no-access
Network interface port statistics data.
             integraEifPortStcEntry 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1 no-access
An entry containing network physical port statistics counter data.
                 integraEifPortStcIndex 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.1 integer32 read-only
A unique value, greater than zero, for each physical network interface. It is recommended that values are assigned contiguously starting from 1.
                 integraEifPortStcDescr 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.2 displaystring read-only
Physical network interface description. LAN1 is electrical, LAN2 and LAN3 are SFP, WAN is radio port and MNG is internal management interface.
                 integraEifTimePassed 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.3 timeticks read-only
Statistics collection time.
                 integraEifIngressPackets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.4 counter64 read-only
Packets that ingress on the port.
                 integraEifIngressBytes 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.5 counter64 read-only
Bytes that ingress on the port.
                 integraEifEgressPackets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.6 counter64 read-only
Packets that egress on the port.
                 integraEifEgressBytes 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.7 counter64 read-only
Bytes that egress on the port.
                 integraEifEtherStatsMulticastPkts 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.8 counter64 read-only
The total number of good packets (both received and transmitted) that were directed to a multicast address. Note that this number does not include packets directed to the broadcast address.
                 integraEifEtherStatsBroadcastPkts 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.9 counter64 read-only
The total number of good packets (both received and transmitted) that were directed to the broadcast address. Note that this does not include multicast packets.
                 integraEifEtherStatsPkts64Octets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.10 counter64 read-only
The total number of packets (including bad packets) (both received and transmitted) that were 64 octets in length (excluding framing bits but including FCS octets).
                 integraEifEtherStatsPkts65to127Octets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.11 counter64 read-only
The total number of packets (including bad packets) (both received and transmitted) that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraEifEtherStatsPkts128to255Octets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.12 counter64 read-only
The total number of packets (including bad packets) (both received and transmitted) that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraEifEtherStatsPkts256to511Octets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.13 counter64 read-only
The total number of packets (including bad packets) (both received and transmitted) that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraEifEtherStatsPkts512to1023Octets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.14 counter64 read-only
The total number of packets (including bad packets) (both received and transmitted) that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraEifEtherStatsPkts1024to1518Octets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.15 counter64 read-only
The total number of packets (including bad packets) (both received and transmitted) that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraEifEtherStatsOversizePkts 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.16 counter64 read-only
The number of packets (both received and transmitted) that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.
                 integraEifEtherRxOversizePkts 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.17 counter64 read-only
The number of packets received that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.
                 integraEifEtherTxOversizePkts 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.18 counter64 read-only
The number of packets transmitted that were longer than 1518 octets (excluding framing bits but including FCS octets) but were otherwise well formed.
                 integraEifEtherStatsOctets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.19 counter64 read-only
Total number of octets of data (including those in bad packets) both received and transmitted.
                 integraEifEtherStatsPkts 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.20 counter64 read-only
Total number of packets (including bad packets) both received and transmitted.
                 integraEifEtherStatsTXNoErrors 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.21 counter64 read-only
Number of packets that were transmitted without errors.
                 integraEifEtherStatsRXNoErrors 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.22 counter64 read-only
Number of packets that were received without errors.
                 integraEifEtherStatsPkts1519to1522Octets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.23 counter64 read-only
The total number of packets (including bad packets) (both received and transmitted) that were between 1519 and 1522 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraEifIfInOctets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.24 counter64 read-only
Total number of octets of data (including those in bad packets) that were received.
                 integraEifIfOutOctets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.25 counter64 read-only
Total number of octets of data (including those in bad packets) that were transmitted.
                 integraEifDot1dTpPortInFrames 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.26 counter64 read-only
The number of frames that have been received by this port from its segment.
                 integraEifDot1dTpPortOutFrames 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.27 counter64 read-only
The number of frames that have been transmitted by this port to its segment.
                 integraEifReceivedPkts64Octets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.28 counter64 read-only
Total number of received packets that were 64 octets in length (excluding framing bits but including FCS octets).
                 integraEifTransmittedPkts64Octets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.29 counter64 read-only
Total number of transmitted packets that were 64 octets in length (excluding framing bits but including FCS octets).
                 integraEifReceivedPkts65to127Octets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.30 counter64 read-only
Total number of received packets that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraEifTransmittedPkts65to127Octets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.31 counter64 read-only
Total number of transmitted packets that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraEifReceivedPkts128to255Octets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.32 counter64 read-only
Total number of received packets that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraEifTransmittedPkts128to255Octets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.33 counter64 read-only
Total number of transmitted packets that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraEifReceivedPkts256to511Octets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.34 counter64 read-only
Total number of received packets that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraEifTransmittedPkts256to511Octets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.35 counter64 read-only
Total number of transmitted packets that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraEifReceivedPkts512to1023Octets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.36 counter64 read-only
Total number of received packets that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraEifTransmittedPkts512to1023Octets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.37 counter64 read-only
Total number of transmitted packets that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraEifReceivedPkts1024to1518Octets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.38 counter64 read-only
Total number of received packets that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraEifTransmittedPkts1024to1518Octets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.39 counter64 read-only
Total number of transmitted packets that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                 integraEifIfInBroadcastPkts 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.40 counter64 read-only
The total number of received good packets that were directed to the broadcast address. Note that this does not include multicast packets.
                 integraEifIfOutBroadcastPkts 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.41 counter64 read-only
The total number of transmitted good packets that were directed to the broadcast address. Note that this does not include multicast packets.
                 integraEifIfInMulticastPkts 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.42 counter64 read-only
The total number of received good packets that were directed to a multicast address. Note that this number does not include broadcast packets.
                 integraEifIfOutMulticastPkts 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.43 counter64 read-only
The total number of transmitted good packets that were directed to a multicast address. Note that this number does not include broadcast packets.
                 integraEifDot3InPauseFrames 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.44 counter64 read-only
A count of MAC Control frames received on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode.
                 integraEifDot3OutPauseFrames 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.45 counter64 read-only
A count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode.
                 integraEifEtherStatsUndersizePkts 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.46 counter64 read-only
The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
                 integraEifEtherStatsFragments 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.47 counter64 read-only
The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for etherStatsFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits.
                 integraEifEtherStatsCRCAlignErrors 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.48 counter64 read-only
The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                 integraEifEtherStatsJabbers 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.49 counter64 read-only
The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
                 integraEifIngressBPS 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.50 integer32 read-only
Ingoing data transfer rate in bytes per second.
                 integraEifIngressPPS 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.51 integer32 read-only
Ingoing data transfer rate in packets per second.
                 integraEifEgressBPS 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.52 integer32 read-only
Outgoing data transfer rate in bytes per second.
                 integraEifEgressPPS 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.53 integer32 read-only
Outgoing data transfer rate in packets per second.
                 integraEifAllCoSQoutPackets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.54 counter64 read-only
All CoSQ outgoing packets.
                 integraEifAllCoSQoutBytes 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.55 counter64 read-only
All CoSQ outgoing bytes.
                 integraEifAllCoSQdroppedPackets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.56 counter64 read-only
All CoSQ dropped packets.
                 integraEifAllCoSQdroppedBytes 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.57 counter64 read-only
All CoSQ dropped bytes.
                 integraEifProcessedRxPackets 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.58 counter64 read-only
Processed received packets.
                 integraEifProcessedRxBytes 1.3.6.1.4.1.7571.100.1.1.7.9.5.2.1.59 counter64 read-only
Processed received bytes.
         integraEifLspPortAdminState 1.3.6.1.4.1.7571.100.1.1.7.9.5.3 integer read-only
LSP port status. Enumeration: 'disabled': 1, 'unknown': 4, 'backup': 3, 'lsp': 2.
         integraEifLspPortList 1.3.6.1.4.1.7571.100.1.1.7.9.5.4 bits read-only
LSP port status. Bits: 'none': 0, 'lan3': 3, 'lan2': 2, 'lan1': 1.
         integraEifLspPortStatus 1.3.6.1.4.1.7571.100.1.1.7.9.5.5 integer read-only
LSP port status. Enumeration: 'lspPortOK': 1, 'unknown': 6, 'lspPortDownBlockedByLSP': 2, 'backupLinkActive': 4, 'backupNoLink': 3, 'backupLinkReady': 5.
     integraEexecuteConfig 1.3.6.1.4.1.7571.100.1.1.7.9.6 integer read-write
This object can only be set to 1. It initiates new running configuration applying using values, that have been set before. Setting it when no new changes are available will do nothing and return an error. GET will return 0 if there were no errors, while executing configuration or will return a bitmask, that shows which SET requests have failed. Those failed requests will be shown bit wise from LSB as follows: BIT0 radioTxMuteDuration BIT1 radioTxFrequency BIT2 radioTxPower Enumeration: 'execute': 1.
     integraEneedStore 1.3.6.1.4.1.7571.100.1.1.7.9.7 integer read-only
This object shows if there is unsaved, but executed (running) configuration. Unsaved changes will be lost after device reboot. Unsaved entities are shown bit wise, starting from LSB as follows: BIT0 Aggregation BIT1 Event log BIT2 Modem BIT3 Network BIT4 Performance BIT5 Radio BIT6 SNMP BIT7 Synchronous Ethernet BIT8 System Enumeration: 'no': 0.
     integraEstoreConfig 1.3.6.1.4.1.7571.100.1.1.7.9.8 integer read-write
This object can only be set to 1. It initiates saving of running configuration. It will only work if there are unsaved, but executed (running) changes (configuration). Setting it when no new running configuration is available will do nothing and return an error. Enumeration: 'store': 1.
     integraEnetCfg 1.3.6.1.4.1.7571.100.1.1.7.9.9
         integraEnetCfgIPaddress 1.3.6.1.4.1.7571.100.1.1.7.9.9.1 displaystring read-write
Local IP address
         integraEnetCfgIPmask 1.3.6.1.4.1.7571.100.1.1.7.9.9.2 displaystring read-write
Local IP mask
         integraEnetCfgIPgateway 1.3.6.1.4.1.7571.100.1.1.7.9.9.3 displaystring read-write
IP gateway Send '0' or '255.255.255.255' to clear.
         integraEnetCfgRemoteIPaddress 1.3.6.1.4.1.7571.100.1.1.7.9.9.4 displaystring read-only
Remote IP address
     integraEConformance 1.3.6.1.4.1.7571.100.1.1.7.9.10
           integraECompliances 1.3.6.1.4.1.7571.100.1.1.7.9.10.1
               integraECompliance 1.3.6.1.4.1.7571.100.1.1.7.9.10.1.1
The compliance statement for SNMP engine which implements the SAF Tehnika Integra-E device.
           integraEGroups 1.3.6.1.4.1.7571.100.1.1.7.9.10.2
               integraEMiscGroup 1.3.6.1.4.1.7571.100.1.1.7.9.10.2.1
misc data
               integraERadioGroup 1.3.6.1.4.1.7571.100.1.1.7.9.10.2.2
Radio group.
               integraEModemGroup 1.3.6.1.4.1.7571.100.1.1.7.9.10.2.3
Modem group.
               integraESystemGroup 1.3.6.1.4.1.7571.100.1.1.7.9.10.2.4
System group.
               integraEEthernetGeneralGroup 1.3.6.1.4.1.7571.100.1.1.7.9.10.2.5
A collection to objects, providing info applicable to all network interfaces.
               integraEEthernetMiiPortGroup 1.3.6.1.4.1.7571.100.1.1.7.9.10.2.6
A collection of objects, providing info applicable only to MII group interfaces.