SAF-ALARM-MIB: View SNMP OID List / Download MIB

VENDOR: SAF TEHNIKA


 Home MIB: SAF-ALARM-MIB
Download as:   
SNMPv2-CONF, ALARM-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, IANA-ITU-ALARM-TC-MIB, ITU-ALARM-TC-MIB, SAF-ENTERPRISE, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 safAlarmMIB 1.3.6.1.4.1.7571.100.118
The MIB module describes a solution to SAF Tehnika equipment alarms and to store the current list of active alarms. Copyright (C) SAF Tehnika, 2007-2012.
         safAlarmNotifications 1.3.6.1.4.1.7571.100.118.0
             safAlarmActiveState 1.3.6.1.4.1.7571.100.118.0.2
An instance of the alarm indicated.
             safAlarmActiveTState 1.3.6.1.4.1.7571.100.118.0.3
An instance of the alarm indicated.
             safAlarmClearState 1.3.6.1.4.1.7571.100.118.0.4
An instance of the clear alarm.
         safAlarmObjects 1.3.6.1.4.1.7571.100.118.1
             safAlarmActive 1.3.6.1.4.1.7571.100.118.1.1
                 safAlarmActiveLastChanged 1.3.6.1.4.1.7571.100.118.1.1.1 timeticks read-only
The value of sysUpTime at the time of the last creation, deletion or modification of an entry in the safAlarmTable(s).
                 safAlarmActiveTable 1.3.6.1.4.1.7571.100.118.1.1.2 no-access
Alarm table.
                     safAlarmActiveEntry 1.3.6.1.4.1.7571.100.118.1.1.2.1 no-access
Entries of alarm table.
                         safAlarmActiveIndex 1.3.6.1.4.1.7571.100.118.1.1.2.1.1 unsigned32 no-access
An integer that acts as an alarm Id to uniquely identify each alarm within the alarm list.
                         safAlarmActiveManagedObj 1.3.6.1.4.1.7571.100.118.1.1.2.1.2 object identifier read-only
Object, which raises an alarm. Indicates specific object, which raises an alarm. This should refer to interfaces or Object class and instance.
                         safAlarmActiveDateAndTime 1.3.6.1.4.1.7571.100.118.1.1.2.1.3 dateandtime read-only
Alarm date and time.
                         safAlarmActiveEventType 1.3.6.1.4.1.7571.100.118.1.1.2.1.4 ianaitueventtype read-only
Alarm type in accordance with IANA.
                         safAlarmActiveProbableCause 1.3.6.1.4.1.7571.100.118.1.1.2.1.5 safalarmprobablecause read-only
This parameter defines further qualification as to the probable cause of the alarm. Probable cause values for notifications shall be indicated in te behaviour clause of the object class definition. This parameter defines standard probables causes that have wide applicability across managed object classes.
                         safAlarmActivePerceivedSeverity 1.3.6.1.4.1.7571.100.118.1.1.2.1.6 safperceivedseverity read-only
ITU perceived severity values.
                         safAlarmActiveThresholdTrigered 1.3.6.1.4.1.7571.100.118.1.1.2.1.7 integer32 read-only
The identifier of the threshold attribute that caused the notification.
                         safAlarmActiveThresholdValue 1.3.6.1.4.1.7571.100.118.1.1.2.1.8 integer32 read-only
The value of the gauge or counter which crossed the threshold. This may be different from the threshold value if, for example, the gauge may only take on descrete values.
                         safAlarmActiveThresholdTTrigered 1.3.6.1.4.1.7571.100.118.1.1.2.1.9 displaystring read-only
                         safAlarmActiveThresholdTValue 1.3.6.1.4.1.7571.100.118.1.1.2.1.10 displaystring read-only
                         safAlarmActiveAdditionalText 1.3.6.1.4.1.7571.100.118.1.1.2.1.11 snmpadminstring read-only
Alarm information interpreted in user friendly text. For example, 'Ethernet interface'.
                 safAlarmActiveLastChangedDateAndTime 1.3.6.1.4.1.7571.100.118.1.1.3 dateandtime read-only
The value of Date and Time when the last creation, deletion or modification of an entry in the safAlarmTable(s).
         safAlarmConformance 1.3.6.1.4.1.7571.100.118.3
             safAlarmGroups 1.3.6.1.4.1.7571.100.118.3.2
                 safAlarmActiveGroup 1.3.6.1.4.1.7571.100.118.3.2.1
Active Alarm list group.
                 safAlarmNotificationsGroup 1.3.6.1.4.1.7571.100.118.3.2.2
The collection of notifications that can be used to alarms for faults.
                 safAlarmNotificationsGroup1 1.3.6.1.4.1.7571.100.118.3.2.3
The collection of notifications that can be used to alarms for faults.