S5-ETHERNET-TRAP-MIB: View SNMP OID List / Download MIB

VENDOR: SYNOPTICS


 Home MIB: S5-ETHERNET-TRAP-MIB
Download as:   
SNMPv2-CONF, S5-SWITCH-BAYSECURE-MIB, S5-ETHERNET-COMMON-MIB, SNMPv2-SMI, S5-ETH-REDUNDANT-LINKS-MIB, S5-ROOT-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 s5EthernetTrapMib 1.3.6.1.4.1.45.1.6.2.1.0
5000 Ethernet Trap MIB Copyright 1993-2009 Nortel Networks, Inc. All rights reserved. This Nortel Networks SNMP Management Information Base Specification (Specification) embodies Nortel Networks' confidential and proprietary intellectual property. Nortel Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS,' and Nortel Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
     s5EtrSbsMacTableFull 1.3.6.1.4.1.45.1.6.2.1.0.1
This trap is sent when the mac-security address table is filled.
     s5EtrSbsMacTableClearedForPort 1.3.6.1.4.1.45.1.6.2.1.0.2
This trap is sent when the mac-security address table is cleared for a particular port.
     s5EtrSbsMacTableCleared 1.3.6.1.4.1.45.1.6.2.1.0.3
This trap is sent when the mac-security address table is cleared for all ports.
     s5EtrSbsMacRemoved 1.3.6.1.4.1.45.1.6.2.1.0.4
This trap is sent when a mac address is removed from the mac-security address table.
     s5EtrNewSbsMacAccessViolation 1.3.6.1.4.1.45.1.6.2.1.0.5
This trap is sent when the switch device detects a Mac_address based security violation on a port set by s5SbsSecurityAction defined in s5sbs100.mib. This trap is sent only once when the condition is first detected. The following values are returned: s5SbsViolationStatusBrdIndx...the Board number on which a security violation was seen. s5SbsViolationStatusPortIndx...the Port number on which a security violation was seen. s5SbsViolationStatusMACIndx...the mac address triggers this violation
     s5EtrNewMgmAccessViolation 1.3.6.1.4.1.45.1.6.2.1.0.6
This trap is sent when the switch device detects a management access violation on the switch. This trap is sent only once when the condition is first detected. The following values are returned: s5SbsMgmViolationType.....WEB access violation or telnet access violation or SNMP access violation. s5SbsMgmViolationIpAddress...the invalid IP address.
     s5EtrNewPortManualPart 1.3.6.1.4.1.45.1.6.2.1.0.7
A port was manually partitioned (wrapped). This trap is sent once when the port is initially partitioned. The following values are returned: s5EnPortPartStatus.....the partition status of the port, with the instance identifying the board and the port. s5EnPortJabberStatus...the jabber status of the DTE(s) connected to the port, with the instance identifying the board and the port.
     s5EtrNewPortAutoPart 1.3.6.1.4.1.45.1.6.2.1.0.8
A port was auto partitioned (wrapped). This trap is sent only once when the condition is first detected. The following values are returned: s5EnPortPartStatus.....the partition status of the port, with the instance identifying the board and the port. s5EnPortJabberStatus...the jabber status of the DTE(s) connected to the port, with the instance identifying the board and the port.
     s5EtrNewPortDteJabbering 1.3.6.1.4.1.45.1.6.2.1.0.9
An ethernet DTE started jabbering. This trap is sent only once when the condition is first detected. The following values are returned: s5EnPortJabberStatus...the jabber status of the DTE(s) connected to the port, with the instance identifying the board and the port.
     s5EtrNewRedPortFailure 1.3.6.1.4.1.45.1.6.2.1.0.10
A port that is in a redundant pair developed a fault. This trap is sent once when the condition is first detected. For all objects returned in the trap, the instance identifies the board and the port index. The following values are returned: s5EnRedPortOperStatus.........The status of the port. The value will distinguish between a local fault, a remote fault, and a missing board. s5EnRedPortCompanionBrdNum....The index of the slot containing the board of the other port in the redundant pair. s5EnRedPortCompanionPortNum...The index of the other port in the redundant pair. s5EnPortPartStatus, s5EnPortLinkStatus and s5EnPortJabberStatus..........These values may help determine the cause of the local fault.
     s5EtrNewRedBadRemCfgDetected 1.3.6.1.4.1.45.1.6.2.1.0.11
This trap is sent periodically when the NMM detects a remoteOperStatus of invalid on a port set for redundancy. The instance identifies the board and port index. The following values are returned: s5EnRedPortRemoteOperStatus.....The value of the received signal from the remote port. s5EnRedPortRedundMode...the redundancy mode of the port.
     s5EtrMacAddressTablesThresholdReached 1.3.6.1.4.1.45.1.6.2.1.0.12
A s5EtrMacAddressTablesThresholdReached trap signifies that the MAC address tables threshold is reached.
 s5EtrPortAutoPart 1.3.6.1.4.1.45.1.6.2.1.1
A port was auto partitioned (wrapped). This trap is sent only once when the condition is first detected. The following values are returned: s5EnPortPartStatus.....the partition status of the port, with the instance identifying the board and the port. s5EnPortJabberStatus...the jabber status of the DTE(s) connected to the port, with the instance identifying the board and the port.
 s5EtrPortDteJabbering 1.3.6.1.4.1.45.1.6.2.1.2
An ethernet DTE started jabbering. This trap is sent only once when the condition is first detected. The following values are returned: s5EnPortJabberStatus...the jabber status of the DTE(s) connected to the port, with the instance identifying the board and the port.
 s5EtrRedPortFailure 1.3.6.1.4.1.45.1.6.2.1.3
A port that is in a redundant pair developed a fault. This trap is sent once when the condition is first detected. For all objects returned in the trap, the instance identifies the board and the port index. The following values are returned: s5EnRedPortOperStatus.........The status of the port. The value will distinguish between a local fault, a remote fault, and a missing board. s5EnRedPortCompanionBrdNum....The index of the slot containing the board of the other port in the redundant pair. s5EnRedPortCompanionPortNum...The index of the other port in the redundant pair. s5EnPortPartStatus, s5EnPortLinkStatus and s5EnPortJabberStatus..........These values may help determine the cause of the local fault.
 s5EtrRedBadRemCfgDetected 1.3.6.1.4.1.45.1.6.2.1.4
This trap is sent periodically when the NMM detects a remoteOperStatus of invalid on a port set for redundancy. The instance identifies the board and port index. The following values are returned: s5EnRedPortRemoteOperStatus.....The value of the received signal from the remote port. s5EnRedPortRedundMode...the redundancy mode of the port.
 s5EtrSbsMacAccessViolation 1.3.6.1.4.1.45.1.6.2.1.5
This trap is sent when the switch device detects a Mac_address based security violation on a port set by s5SbsSecurityAction defined in s5sbs100.mib. This trap is sent only once when the condition is first detected. The following values are returned: s5SbsViolationStatusBrdIndx...the Board number on which a security violation was seen. s5SbsViolationStatusPortIndx...the Port number on which a security violation was seen. s5SbsViolationStatusMACIndx...the mac address triggers this violation
 s5EtrMgmAccessViolation 1.3.6.1.4.1.45.1.6.2.1.6
This trap is sent when the switch device detects a management access violation on the switch. This trap is sent only once when the condition is first detected. The following values are returned: s5SbsMgmViolationType.....WEB access violation or telnet access violation or SNMP access violation. s5SbsMgmViolationIpAddress...the invalid IP address.
 s5EtrPortManualPart 1.3.6.1.4.1.45.1.6.2.1.7
A port was manually partitioned (wrapped). This trap is sent once when the port is initially partitioned. The following values are returned: s5EnPortPartStatus.....the partition status of the port, with the instance identifying the board and the port. s5EnPortJabberStatus...the jabber status of the DTE(s) connected to the port, with the instance identifying the board and the port.