RUCKUS-DEVICE-MIB: View SNMP OID List / Download MIB

VENDOR: RUCKUS WIRELESS


 Home MIB: RUCKUS-DEVICE-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ruckusDeviceMIB 1.3.6.1.4.1.25053.1.1.4.1
Ruckus device management mib.
     ruckusDeviceObjects 1.3.6.1.4.1.25053.1.1.4.1.1
         ruckusDeviceInfo 1.3.6.1.4.1.25053.1.1.4.1.1.1
             ruckusDeviceName 1.3.6.1.4.1.25053.1.1.4.1.1.1.1 displaystring read-write
Specifies name of the device. Show the same value as model name.
             ruckusDeviceReboot 1.3.6.1.4.1.25053.1.1.4.1.1.1.2 truthvalue read-write
Setting this object to true(1) would cause to reboot the device. Always returns false(2) on read.
             ruckusDeviceRebootWithDefaults 1.3.6.1.4.1.25053.1.1.4.1.1.1.3 truthvalue read-write
This allows the product to revert to factory defaults.
             ruckusDeviceCountryCode 1.3.6.1.4.1.25053.1.1.4.1.1.1.4 ruckuscountrycode read-write
Specifies the country code. Example ISO country codes: CA,US,HK,IL,CN,JP,TW.
             ruckusDeviceGPS 1.3.6.1.4.1.25053.1.1.4.1.1.1.5 displaystring read-write
Specifies GPS coordinates of the device. (e.g. 37.3881,-122.0258)
             ruckusDeviceNEId 1.3.6.1.4.1.25053.1.1.4.1.1.1.6 displaystring read-write
NE Id.
             ruckusDeviceLocation 1.3.6.1.4.1.25053.1.1.4.1.1.1.10 displaystring read-write
Location of the device. Show the intstallation position.
         ruckusDeviceTrapInfo 1.3.6.1.4.1.25053.1.1.4.1.1.2
             ruckusDeviceTrapDestination 1.3.6.1.4.1.25053.1.1.4.1.1.2.1 octet string read-write
Specifies primary trap destination IPv6 or IPv4 address.
             ruckusDeviceTrapDestination2 1.3.6.1.4.1.25053.1.1.4.1.1.2.2 octet string read-write
Specifies secondary trap destination IPv6 or IPv4 address.
         ruckusDeviceIPInfo 1.3.6.1.4.1.25053.1.1.4.1.1.3
             ruckusDevicePrimaryDNS 1.3.6.1.4.1.25053.1.1.4.1.1.3.1 ipaddress read-write
Specifies primary DNS IP address.
             ruckusDeviceSecondaryDNS 1.3.6.1.4.1.25053.1.1.4.1.1.3.2 ipaddress read-write
Specifies secondary DNS IP address.
             ruckusDevicePrimaryDNSIPV6 1.3.6.1.4.1.25053.1.1.4.1.1.3.3 octet string read-write
Specifies primary DNS IPV6 address.
             ruckusDeviceSecondaryDNSIPV6 1.3.6.1.4.1.25053.1.1.4.1.1.3.4 octet string read-write
Specifies secondary DNS IPV6 address.
         ruckusDeviceWanInfo 1.3.6.1.4.1.25053.1.1.4.1.1.4
             ruckusDeviceWanTable 1.3.6.1.4.1.25053.1.1.4.1.1.4.1 no-access
Specifies each wan table.
                 ruckusDeviceWanEntry 1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1 no-access
Specifies each wan entry.
                     ruckusDeviceWanIPAddrMode 1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.1 integer read-write
Specifies how the wan gets its IP address. none - bridging static - Statically assigned IP address dhcp - Using DHCP protocol pppoe - Using PPPoE protocol when ipaddr mode from dhcp to static,the relative nodes should be set together , including:ruckusDeviceWanIPAddr,ruckusDeviceWanNetmask,ruckusDeviceWanGateway Enumeration: 'dhcp': 3, 'none': 1, 'static': 2, 'pppoe': 4.
                     ruckusDeviceWanIPAddr 1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.2 ipaddress read-write
This is writable only if the ruckusDeviceWanIPAddrMode is set to static(2).
                     ruckusDeviceWanName 1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.3 displaystring read-only
Specifies the name of the wan interface.
                     ruckusDeviceWanNetmask 1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.4 ipaddress read-write
Specifies the ip address mask if the ruckusDeviceWanIPAddrMode is set to static(2).
                     ruckusDeviceWanGateway 1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.5 ipaddress read-write
Specifies the gateway ipaddr if the ruckusDeviceWanIPAddrMode is set to static(2).
                     ruckusDeviceWanIPVersion 1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.8 integer read-write
Specifies the system ip version,ipv4 or ipv6 or dualstack. ipv4 - only support IPV4 ipv6 - only support IPV6 dualstack - support IPV4 and IPV6 Enumeration: 'dualstack': 3, 'ipv4': 1, 'ipv6': 2.
                     ruckusDeviceWanIPV6AddrMode 1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.10 integer read-write
Specifies how the wan gets its IPV6 address. auto-configuration - auto get ipv6 address by RFC about IPV6 static - Statically assigned IPV6 address when ipv6addr mode from auto-configuration to static,the relative nodes should be set together , including:ruckusDeviceWanIPV6Addr,ruckusDeviceWanIPV6PrefixLen,ruckusDeviceWanIPV6Gateway Enumeration: 'static': 2, 'auto-configuration': 1.
                     ruckusDeviceWanIPV6Addr 1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.11 octet string read-write
This is writable only if the ruckusDeviceWanIPAddrMode is set to static(2).
                     ruckusDeviceWanIPV6PrefixLen 1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.12 integer read-write
Specifies the ip v6 address prefix length if the ruckusDeviceWanIPV6AddrMode is set to static(2).
                     ruckusDeviceWanIPV6Gateway 1.3.6.1.4.1.25053.1.1.4.1.1.4.1.1.13 octet string read-write
Specifies the gateway ipv6 address if the ruckusDeviceWanIPV6AddrMode is set to static(2).
     ruckusDeviceEvents 1.3.6.1.4.1.25053.1.1.4.1.2