RS366-OPT-MIB: View SNMP OID List / Download MIB

VENDOR: CODEX


 Home MIB: RS366-OPT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 codex 1.3.6.1.4.1.449
         cdxProductSpecific 1.3.6.1.4.1.449.2
             cdx6500 1.3.6.1.4.1.449.2.1
                 cdx6500Configuration 1.3.6.1.4.1.449.2.1.2
                     cdx6500CfgProtocolGroup 1.3.6.1.4.1.449.2.1.2.1
                         cdx6500PCTPortProtocolGroup 1.3.6.1.4.1.449.2.1.2.1.1
                             cdx6500PPCTRS366PortTable 1.3.6.1.4.1.449.2.1.2.1.1.21 no-access
A list of RS366 Port configuration entries.
                                   cdx6500PPCTRS366PortEntry 1.3.6.1.4.1.449.2.1.2.1.1.21.1 no-access
An RS366 Configuration Table entry. Each entry contains the configuration parameters for a single RS366 port.
                                       cdx6500RS366CfgPortNumber 1.3.6.1.4.1.449.2.1.2.1.1.21.1.1 integer read-only
Port Number.
                                       cdx6500RS366CfgADataPortNumber 1.3.6.1.4.1.449.2.1.2.1.1.21.1.2 integer read-only
Associated Data Port Number
                                       cdx6500RS366CfgContXferMode 1.3.6.1.4.1.449.2.1.2.1.1.21.1.3 integer read-only
modeEon - Transfer control after end of number digit detected. modeEbt - Transfer control after maximum address digits accumulated and answerback tone is received. newvalModeNull - same functionality as 'modeNull', new enumeration added for RFC1155 compatibility. Enumeration: 'modenull': 0, 'modeebt': 2, 'modeeon': 1, 'newvalmodenull': 50.
                                       cdx6500RS366CfgMaxAddrDigits 1.3.6.1.4.1.449.2.1.2.1.1.21.1.4 integer read-only
Number of digits required to transfer control in EBT mode. This parameter is not required in EON mode and it is set to 15 irrespective of the user entry.
                                       cdx6500RS366CfgMaxRespTime 1.3.6.1.4.1.449.2.1.2.1.1.21.1.5 integer read-only
Maximum EIA response time in seconds before a timeout can occur. sec0 - Indicates response time out should be disabled. sec32 - Maximum EIA response time is 32 seconds. sec48 - Maximum EIA response time is 48 seconds. sec96 - Maximum EIA response time is 96 seconds. newvalSec0 - same functionality as 'sec0', new enumeration added for RFC1155 compatibility. Enumeration: 'newvalSec0': 50, 'sec0': 0, 'sec32': 32, 'sec48': 48, 'sec96': 96.
                                       cdx6500RS366CfgElectricalInterfaceType 1.3.6.1.4.1.449.2.1.2.1.1.21.1.6 integer read-only
Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 - X.21 Electrical Interface Type NONE - Electrically disabled Enumeration: 'none': 5, 'x21': 4, 'v35': 2, 'v36': 3, 'v24': 1.
                                       cdx6500RS366CfgV24ElectricalInterfaceOption 1.3.6.1.4.1.449.2.1.2.1.1.21.1.7 integer read-only
Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal Enumeration: 'tm': 2, 'ri': 1.
                                       cdx6500RS366CfgHighSpeedElectricalInterfaceOption 1.3.6.1.4.1.449.2.1.2.1.1.21.1.8 integer read-only
Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable Enumeration: 'none': 1, 'xover': 2.
                 cdx6500Statistics 1.3.6.1.4.1.449.2.1.3
                     cdx6500StatProtocolGroup 1.3.6.1.4.1.449.2.1.3.1
                         cdx6500PSTPortProtocolGroup 1.3.6.1.4.1.449.2.1.3.1.1
                             cdx6500PPSTRS366PortTable 1.3.6.1.4.1.449.2.1.3.1.1.22 no-access
A list of RS366 Port statistics.
                                   cdx6500PPSTRS366PortEntry 1.3.6.1.4.1.449.2.1.3.1.1.22.1 no-access
An RS366 Statistics Table entry. Each entry contains the statistics for a single RS366 port.
                                       cdx6500RS366StatPortNumber 1.3.6.1.4.1.449.2.1.3.1.1.22.1.1 integer read-only
Port Number.
                                       cdx6500RS366StatPortStatus 1.3.6.1.4.1.449.2.1.3.1.1.22.1.2 displaystring read-only
Enabled or Disabled.
                                       cdx6500RS366StatPortState 1.3.6.1.4.1.449.2.1.3.1.1.22.1.3 displaystring read-only
Port State.
                                       cdx6500RS366StatDataNum 1.3.6.1.4.1.449.2.1.3.1.1.22.1.4 integer read-only
Data Port Number.
                                       cdx6500RS366StatTotalCalls 1.3.6.1.4.1.449.2.1.3.1.1.22.1.5 integer read-only
Number of calls made.
                                       cdx6500RS366StatFailedCalls 1.3.6.1.4.1.449.2.1.3.1.1.22.1.6 integer read-only
Number of failed calls.
                                       cdx6500RS366StatTotalTimeouts 1.3.6.1.4.1.449.2.1.3.1.1.22.1.7 integer read-only
Number of protocol time-outs.
                                       cdx6500RS366StatTotalIllegalDigits 1.3.6.1.4.1.449.2.1.3.1.1.22.1.8 integer read-only
Number of illegal digits received.
                                       cdx6500RS366StatPortConnected 1.3.6.1.4.1.449.2.1.3.1.1.22.1.9 displaystring read-only
Connected to Data Port.
                 cdx6500Controls 1.3.6.1.4.1.449.2.1.4