RS-XX8000-DVB-TX-MIB: View SNMP OID List / Download MIB

VENDOR: ROHDE N SCHWARZ


 Home MIB: RS-XX8000-DVB-TX-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, RS-XX8000-COMMON-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
     rsXx8000DvbTx 1.3.6.1.4.1.2566.127.1.2.167.4
Xx8000 DVB transmitter.
         rsXx8000DvbTxObjs 1.3.6.1.4.1.2566.127.1.2.167.4.1
             commandsTxTable 1.3.6.1.4.1.2566.127.1.2.167.4.1.1 no-access
This table contains important commands for the transmitter.
                 commandsTxEntry 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1 no-access
An entry for a designated transmitter and device.
                     cmdTxResetSumFault 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.1 trigger read-write
Reset all faults (in all modules) of the transmitter. You reset a designated transmitter (NetCCU, Exciters, Outputstages). An equivalent would be pressing RESET at this transmitters frontpanel. A GET will always return idle(1). A SET idle(1) will return NO_ERROR without doing anything.
                     cmdTxParametersetLoad 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.2 integer32 read-write
This loads the desired parameter set.
                     cmdTxParametersetSave 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.3 integer32 read-write
This saves the current settings to a designated parameter set.
                     cmdTxParametersetReSave 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.4 trigger read-write
This saves the changes to the current parameter set.
                     cmdTxOperationModeProgram 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.5 switchonoff read-write
This switches the program path of the transmitter on/off.
                     cmdTxOperationModeReserve 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.6 switchonoff read-write
This switches the reserve path of the transmitter on/off.
                     cmdTxOpModeExcAutomatic 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.7 switchonoff read-write
This switches the exciter automatic on/off.
                     cmdTxOpModeOstAutomatic 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.8 switchonoff read-write
This switches the outputstage automatic on/off. This paramter is only available for systems with an automatic output switch.
                     cmdTxPreselectExciter 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.9 indexab read-write
This sets exciterA or exciterB to program path (antenna) of the transmitter.
                     cmdTxPreselectOutputstage 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.10 integer read-write
This sets - outputstageA or - outputstageB or - both to program path (antenna) of the transmitter, or it sets both to dummyload. The settings bothToAntenna(3) and bothToDummyLoad(4) are only settable for ActiveReserve systems. This paramter is only available for systems with an automatic output switch. Enumeration: 'outputstageA': 1, 'bothToDummyLoad': 4, 'bothToAntenna': 3, 'outputstageB': 2.
                     cmdTxDelayTimeExcAutomatic 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.11 integer32 read-write
This sets the exciter automatic delay time.
                     cmdTxDelayTimeOstAutomatic 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.12 integer32 read-write
This sets the outputstage automatic delay time. This paramter is only available for systems with an automatic output switch.
                     cmdTxRfSwitch 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.13 integer read-write
RF switch for single-ended systems. Enumeration: 'dummyLoad': 2, 'antenna': 1.
                     cmdTxSystemMode 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.15 tvstandard read-write
This object gives you the possibility of switching the TV standard of a whole system with NetCCU with only one command. Not applicable for N+1 or NTx systems. The value 'test' cannot be written.
                     cmdTxProgramExciterPrio 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.20 switchonoff read-write
Enables/Disables priority usage of program exciter
                     cmdTxChangeOver 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.21 trigger read-write
Performs a change over
                     cmdTxSwitchPosition 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.22 integer read-only
Shows the actual switch position. The program exciter is connected to input 1 (RF IN 1), the control exciter is connected to input 2 (RF IN 2) of the base amplifier. Enumeration: 'controlExcOnAmp': 2, 'programExcOnAmp': 3, 'undefined': 1.
                     cmdDeviceIdx 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.30 indexab no-access
This column is used to show parameters for both exiters, if you have dualdrive transmitters.
                     cmdExcOpModeInputAutomatic 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.31 switchonoff read-write
Activates/deactivates the input automatic. If input automatic is active and a loss of input signal is detected on the current input the reserve input will be used instead.
                     cmdExcPreselectInput 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.32 integer read-write
This sets the preselection of a transmitters input. Enumeration: 'input2': 2, 'input1': 1.
                     cmdExcMode 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.33 integer read-write
Switch between DVB-T and DVB-H. Enumeration: 'dvbH': 2, 'dvbT': 1.
                     cmdExcNetworkMode 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.34 integer read-write
Switch between Single Frequency Networks (SFN) and Multiple Frequency Networks (MFN). Enumeration: 'sfn': 2, 'mfn': 1.
                     cmdExcTPSSource 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.35 integer read-write
Transmitted TPS parameters can be adjusted manually inside the transmitter or automatically via MIP from the SFN adaptor. Enumeration: 'mip': 2, 'manualPresets': 1.
                     cmdExcEnableCellID 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.36 switchonoff read-write
This enables the Cell ID insertion. The length indicator will be adjusted.
                     cmdExcTxAddress 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.37 integer32 read-write
This is the unique address of the transmitter to reference specific settings in the MIP.
                     cmdExcTxAutomatic 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.38 switchonoff read-write
This enables Tx specific parameters from the MIP data caroussel (e.g. time offset, frequency offset).
                     cmdExcInputAutoSwitch 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.39 switchonoff read-write
Activates/deactivates the input automatic. If input automatic is active and a loss of input signal is detected on the current input the reserve input will be used instead. This object is deprecated. It's recommended to use cmdExcOpModeInputAutomatic instead.
                     cmdExcInputSeamless 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.40 switchonoff read-write
If the datastreams on both inputs are syncronised a seamless switch is possible. With this parameter the seamless switch can be suppressed to enable a check of the input automatic.
                     cmdExcInputPriority 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.41 integer read-write
Equal: There are no differences between both inputs. If a failure on the current input is detected it will be switched to the reserve input. It stays there until the reserve shows a failure. Prior: Whenever possible a certain input shall be used. If a failure is detected the reserve will be used as short as possible. Enumeration: 'prior': 2, 'equal': 1.
                     cmdExcInputCheckTimeForward 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.42 integer32 read-write
This time has to elapse before the current input switches to the reserve input.
                     cmdExcInputCheckTimeSwitchback 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.43 integer32 read-write
This time has to elapse before the automatic switches back from the reserve to a preselected input. This value has no effect if the priority is set to equal.
                     cmdExcInputMuteOnFail 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.44 integer read-write
If a loss of input signal is detected, the exciter mutes. Enumeration: 'noMute': 2, 'mute': 1.
                     cmdExcInputManualPreseletionHP1 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.45 integer read-write
The data format of the input can be detected automatically or can be set manually to ASI or SMPTE. Enumeration: 'smpte': 3, 'auto': 1, 'asi': 2.
                     cmdExcInputManualPreseletionHP2 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.46 integer read-write
The data format of the input can be detected automatically or can be set manually to ASI or SMPTE. Enumeration: 'smpte': 3, 'auto': 1, 'asi': 2.
                     cmdExcInputManualPreseletionLP1 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.47 integer read-write
The data format of the input can be detected automatically or can be set manually to ASI or SMPTE. Enumeration: 'smpte': 3, 'auto': 1, 'asi': 2.
                     cmdExcInputManualPreseletionLP2 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.48 integer read-write
The data format of the input can be detected automatically or can be set manually to ASI or SMPTE. Enumeration: 'smpte': 3, 'auto': 1, 'asi': 2.
                     cmdExcTPSManualBandwidth 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.49 integer read-write
The bandwidth used by the RF channel. Enumeration: 'mhz8': 4, 'mhz5': 1, 'mhz7': 3, 'mhz6': 2.
                     cmdExcTPSManualFFTLength 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.50 integer read-write
The used FFT length (depends on the DVB network). Enumeration: 'k2': 1, 'k8': 2, 'k4': 3.
                     cmdExcTPSManualGuardInterval 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.51 integer read-write
The Guard interval affects the error correction in multipath receiving situations. A long Guard Interval reduces the amount of payload data. Enumeration: 'oneOf8': 3, 'oneOf16': 2, 'oneOf4': 4, 'oneOf32': 1.
                     cmdExcTPSManualConstellation 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.52 integer read-write
This parameter sets the modulation mode. Enumeration: 'qpsk': 1, 'qam16': 2, 'qam64': 3.
                     cmdExcTPSManualAlpha 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.53 integer read-write
An alpha greater than noHierarchy(1) enables the hierarchical coding mode. Enumeration: 'four': 4, 'noHierarchy': 1, 'two': 3, 'one': 2.
                     cmdExcTPSManualCellID 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.54 integer32 read-write
Via Cell ID the receiver knows the current network.
                     cmdExcTPSManualInterleaver 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.55 integer read-write
Enables the bit interleaver for hierarchical coding Enumeration: 'nat': 2, 'indepth': 1.
                     cmdExcTPSManualCoderateHP 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.56 integer read-write
The Code Rate sets the ratio between payload and error correction information. Enumeration: 'fiveOf6': 4, 'oneOf2': 1, 'sevenOf8': 5, 'threeOf4': 3, 'twoOf3': 2.
                     cmdExcTPSManualCoderateLP 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.57 integer read-write
The Code Rate sets the ratio between payload and error correction information. Enumeration: 'fiveOf6': 4, 'oneOf2': 1, 'sevenOf8': 5, 'threeOf4': 3, 'twoOf3': 2.
                     cmdExcTPSManualTimeSlicingHP 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.58 switchonoff read-write
Enables the time slicing for hierarchical coding.
                     cmdExcTPSManualTimeSlicingLP 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.59 switchonoff read-write
Enables the time slicing for hierarchical coding.
                     cmdExcTPSManualFECHP 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.60 switchonoff read-write
Enables the forward error correction (FEC) for hierarchical coding.
                     cmdExcTPSManualFECLP 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.61 switchonoff read-write
Enables the forward error correction (FEC) for hierarchical coding.
                     cmdExcSFNStaticDelay 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.62 floatingpoint read-write
A constant adjustable delay for tuning a SFN (-999999.9 ... 999999.9).
                     cmdExcSFNDeviationTime 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.63 integer32 read-write
Leap In Time. This parameter sets the deviation in time when a readjustment of the dynamic delay is necessary.
                     cmdExcFrequency 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.64 integer32 read-write
This is the RF frequency.
                     cmdExcReferenceSource 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.65 integer read-write
The Source of the reference signal. The value internGPS is not valid for SX800. Enumeration: 'extern5Mhz': 2, 'extern1PPS': 4, 'intern': 1, 'internGPS': 5, 'extern10Mhz': 3.
                     cmdExcMuteOnPPSFail 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.66 integer read-write
Select the behaviour if the external second pulse is not available. Enumeration: 'off': 1, 'onlyAtStartup': 2, 'afterFailDelayTime': 3.
                     cmdExcMuteOnReferenceFail 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.67 integer read-write
Select the behaviour if the external reference is not available. Enumeration: 'off': 1, 'onlyAtStartup': 2, 'afterFailDelayTime': 3.
                     cmdExcRefFailDelayTime 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.68 integer32 read-write
Adjusts the time after the RF will be muted in case of a reference problem. Zero hours means react immediately.
                     cmdExcTypeLossOfInput 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.69 integer read-write
If the input signal is lost, either a warning or a fault can be generated. If you select fault here, a switchover to the reserve exciter will be executed when input signal is lost. Enumeration: 'fault': 2, 'warning': 1.
                     cmdExcRfOutput 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.70 switchonoff read-write
Turns on/switches off the output signal. This switch takes the same effect as the switch on the frontpanel of the exciter.
                     cmdExcRfOutputRegulation 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.71 switchonoff read-write
Turns on/switches off the automatic output level regulation.
                     cmdExcRfOutputManualRfLevel 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.72 floatingpoint read-write
Adjusts the RF level (0.0 ... 100.0). The value relates to an attenuation of 0 dB.
                     cmdExcRfOutputAttenuation 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.73 integer32 read-write
Activates internal attenuators to reduce the output level of the exciter. Adjustable in steps of 3 dB only.
                     cmdExcRfOutputRfSlope 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.74 floatingpoint read-write
Adjusts a slope in the RF signal (-50.0 ... 50.0).
                     cmdExcRfOutputModulationSlope 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.75 floatingpoint read-write
Modulation slope (-50.0 ... 50.0).
                     cmdExcRfIqAdjustStart 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.77 integer read-write
Starts the automatic IQ adjustment. It works for the current used local 1 frequency and lasts up to 5 minutes. In this time the output will be muted. During the adjustment no transmitter parameter shall be changed. Break will stop the automatic immediately. The IQ modulator looses its adjustment! Read values mean idle(1) and started(2). Enumeration: 'break': 1, 'start': 2.
                     cmdExcRfIqAdjustTestsignal 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.78 switchonoff read-write
Generates a test signal to adjust the IQ modulation. It is necessary to disconnect the rf-cable to the output stages.
                     cmdExcRfIqAdjustBiasCoarseI 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.79 integer32 read-write
Adjusts the offset for I in huge steps.
                     cmdExcRfIqAdjustBiasCoarseQ 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.80 integer32 read-write
Adjusts the offset for Q in huge steps.
                     cmdExcRfIqAdjustBiasFineI 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.81 integer32 read-write
Adjusts the offset for I in small steps.
                     cmdExcRfIqAdjustBiasFineQ 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.82 integer32 read-write
Adjusts the offset for Q in small steps.
                     cmdExcRfIqAdjustGainI 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.83 integer32 read-write
Adjusts the gain for I in small steps.
                     cmdExcRfIqAdjustGainQ 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.84 integer32 read-write
Adjusts the gain for Q in small steps.
                     cmdExcRfIqAdjustPhase 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.85 floatingpoint read-write
Adjusts the phase between I and Q (-14.000 ... 14.000).
                     cmdExcInput1Source 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.86 inputsource read-write
Source for input 1.
                     cmdExcInput2Source 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.87 inputsource read-write
Source for input 2.
                     cmdExcInpAutoReadyAfterChangeOv 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.88 switchonoff read-write
Input automatic ready after change over.
                     cmdExcInputFailDelayTime 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.89 integer32 read-write
The time between detecting a loss of input signal and displaying a failure.
                     cmdExcTransmitterType 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.90 integer read-write
the TV standard of the transmitter The transmitter is rebooted automatically when the TV standard is changed. Signal processing is also switched over. Enumeration: 'atv': 1, 'atsc': 3, 'dvb': 2.
                     cmdExcTimeScheduler 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.91 switchonoff read-write
If on, the time scheduler controls the tx type. When switching on the scheduler it may instantly set the correct TV standard and reboot the device.
                     cmdExcMuteCondition 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.92 integer read-write
When notBeforeSyncLoss(2) is selected, it relativizes the cmdExcInputMuteOnFail setting mute(1): If a DVB receiver is the last valid input, an existing transport stream, even if it is faulty shall not be muted. Only for SLx/Sx801 Enumeration: 'notBeforeSyncLoss': 2, 'onAllFaults': 1.
                     cmdExcRfWarningLimit 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.97 floatingpoint read-write
Warning limit for the RF control. min: -15.0, max: 0.0
                     cmdExcRfFailLimit 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.98 floatingpoint read-write
Fault limit for the RF control. min: -15.0, max: 0.0
                     cmdExcOutputPower 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.99 floatingpoint read-write
amplifier output power 0 ... 400 W
                     cmdOstRefVoltageVision 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.100 floatingpoint read-write
This adjusts the output power of the amplifier. This value is settable with maximal 1 position after point (example 11.2).
                     cmdOstMaxOutletTempThreshold 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.101 integer32 read-write
This sets the threshold for the outlet temperature.
                     cmdExcMonitoringOutput 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.110 integer read-write
Selects which signal appears at the monitoring output. Enumeration: 'kHz1': 4, 'pulse1PPS': 5, 'off': 1, 'reference10MHz': 2, 'generated1PPS': 3.
                     cmdExcOcxoAdjust 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.111 integer32 read-write
Adjusts the frequency of the internal 10 MHz reference. This value only takes effect if the reference source 'internal' is selected.
                     cmdExcExpectInputReserve 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.112 switchonoff read-write
If on(1) the warning txExcInputReseveMissing will be generated in case second input is missing.
                     cmdExcEnablePcrReset 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.113 switchonoff read-write
Enables/disables daily PCR resets. This option is valid only in MFN operation. The reset time is given in cmdExcTimeForDailyPcrReset.
                     cmdExcTimeForDailyPcrReset 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.114 timeofday read-write
Sets the time of day for daily PCR reset.
                     cmdExcFailDelayMode 1.3.6.1.4.1.2566.127.1.2.167.4.1.1.1.115 faildelaymode read-write
Condition when the fail delay time is used.
             summaryInfo 1.3.6.1.4.1.2566.127.1.2.167.4.1.2
                 summaryFaultTx 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.1 truthvalue read-only
This indicates a summary fault of the transmitter. true(1) --> summary fault false(2) --> no summary fault There is a fault of at least one module (e.g. Exciter) which causes this summary fault. An equivalent would be the LED Fault at the transmitters frontpanel.
                 summaryWarningTx 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.2 truthvalue read-only
This indicates a summary warning of the transmitter. true(1) --> summary warning false(2) --> no summary warning There is a fault of at least one module (e.g. Exciter) which causes this summary warning. An equivalent would be the LED Warning at the transmitters frontpanel.
                 localModeTx 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.3 truthvalue read-only
This indicates the local/remote-mode of the transmitter. true(1) --> local false(2) --> remote The transmitter is eigther in local-mode or in remote-mode. For security reasons it is not possible to set this value! An equivalent would the LED Local at the transmitters frontpanel.
                 rfOnTx 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.4 truthvalue read-only
The RF is present for the corresponding transmitter.
                 forwardPower 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.5 floatingpoint read-only
The measured forwarded power [W] of the transmitter. For Active Reserve systems it is the sum of both outputstages.
                 reflectedPower 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.6 floatingpoint read-only
The measured reflected power [W] of the transmitter. For Active Reserve systems it is the sum of both outputstages. Not available for lowpower systems.
                 summaryFaultExcA 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.7 truthvalue read-only
This indicates a summary fault of exciter.
                 summaryFaultOstA 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.8 truthvalue read-only
This indicates a summary fault of outputstage.
                 summaryFaultExcB 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.9 truthvalue read-only
This indicates a summary fault of exciter.
                 summaryFaultOstB 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.10 truthvalue read-only
This indicates a summary fault of outputstage.
                 exciterAutomaticReady 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.11 truthvalue read-only
The Exciter Automatic is Ready. In case of any fault on one exciter, there will be a switchover to the other exciter.
                 exciterAutomaticChanged 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.12 truthvalue read-only
The Exciter Automatic has changed. There was a fault on one exciter which lead to this changeover.
                 exciterAutomaticFault 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.13 truthvalue read-only
The Exciter Automatic is faulty. In case of any fault on one exciter, there will be no switchover to the other exciter, because of this fault.
                 outputstageAutomaticReady 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.14 truthvalue read-only
The Outputstage Automatic is Ready. In case of any fault on one outputstage, there will be a switchover to the other outputstage. This paramter is only available for systems with an automatic output switch.
                 outputstageAutomaticChanged 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.15 truthvalue read-only
The Outputstage Automatic has changed. There was a fault on one outputstage which lead to this changeover. This paramter is only available for systems with an automatic output switch.
                 outputstageAutomaticFault 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.16 truthvalue read-only
The Outputstage Automatic is faulty. In case of any fault on one outputstage, there will be no switchover to the other outputstage, because of this fault. This paramter is only available for systems with an automatic output switch.
                 noConnectionExcA 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.17 truthvalue read-only
No Connection between NetCCU and Exciter.
                 noConnectionOstA 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.18 truthvalue read-only
No Connection between NetCCU and Outputstage.
                 noConnectionExcB 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.19 truthvalue read-only
No Connection between NetCCU and Exciter.
                 noConnectionOstB 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.20 truthvalue read-only
No Connection between NetCCU and Outputstage.
                 activeExcA 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.21 truthvalue read-only
ExciterA is currently active.
                 activeOstA 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.22 truthvalue read-only
OutputstageA is currently active.
                 activeExcB 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.23 truthvalue read-only
ExciterB is currently active.
                 activeOstB 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.24 truthvalue read-only
OutputstageB is currently active.
                 forwardPowerOstA 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.25 floatingpoint read-only
The measured forwarded power [W] of the OutputstageA.
                 reflectedPowerOstA 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.26 floatingpoint read-only
The measured reflected power [W] of the OutputstageA. Not available for lowpower systems.
                 forwardPowerOstB 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.27 floatingpoint read-only
The measured forwarded power [W] of the OutputstageB.
                 reflectedPowerOstB 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.28 floatingpoint read-only
The measured reflected power [W] of the OutputstageB. Not available for lowpower systems.
                 powerSupply 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.29 floatingpoint read-only
Monitoring value of the output voltages of the power supply.
                 additionalPowerSupply 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.30 truthvalue read-only
Shows whether the NetCCU has an additional (external) power supply.
                 internalPowerSupply 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.31 floatingpoint read-only
Monitoring value of the output voltages of the internal power supply.
                 externalPowerSupply 1.3.6.1.4.1.2566.127.1.2.167.4.1.2.32 floatingpoint read-only
Monitoring value of the output voltages of the external power supply.
             detailedInfo 1.3.6.1.4.1.2566.127.1.2.167.4.1.3
                 excInputTable 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.2 no-access
A table for more detailed information about the exciter. These values are all read-only. For settings, refer to commands.
                     excInputEntry 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.2.1 no-access
An entry for a designated input channel.
                         excInputExcIdx 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.2.1.1 indexab no-access
The index for exciterA (and exciterB if there are DualDrive systems).
                         excInputChannelIdx 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.2.1.2 integer32 no-access
The index for the different input channels.
                         excInputChannelName 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.2.1.3 integer read-only
This is the logical name for the index for the different input channels. Enumeration: 'hp2': 2, 'hp1': 1, 'lp2': 4, 'activeHP': 5, 'lp1': 3, 'activeLP': 6.
                         excInputConnected 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.2.1.4 truthvalue read-only
The input channel is connected.
                         excInputSeamless 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.2.1.5 truthvalue read-only
The input channel is in seamless mode.
                         excInputPreselected 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.2.1.6 truthvalue read-only
The input channel is the preselected.
                         excInputActive 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.2.1.7 truthvalue read-only
The input channel is active.
                         excInputMipFail 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.2.1.8 truthvalue read-only
Input channel MIP fail.
                         excInputBandwidth 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.2.1.9 integer read-only
The bandwidth used by the input channel. Enumeration: 'mhz8': 4, 'mhz5': 1, 'mhz7': 3, 'mhz6': 2.
                         excInputFFTLength 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.2.1.10 integer read-only
The used FFT length (depends on the DVB network). Enumeration: 'k2': 1, 'k8': 2, 'k4': 3.
                         excInputGuardInterval 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.2.1.11 integer read-only
The Guard interval affects the error correction in multipath receiving situations. A long Guard Interval reduces the amount of payload data. Enumeration: 'oneOf8': 3, 'oneOf16': 2, 'oneOf4': 4, 'oneOf32': 1.
                         excInputConstellation 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.2.1.12 integer read-only
This parameter sets the modulation mode. Enumeration: 'qpsk': 1, 'qam16': 2, 'qam64': 3.
                         excInputAlpha 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.2.1.13 integer read-only
An alpha greater than zero enables the hierarchical coding mode. Enumeration: 'four': 4, 'noHierarchy': 1, 'two': 3, 'one': 2.
                         excInputCellID 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.2.1.14 integer32 read-only
Via Cell ID the receiver knows the current network.
                         excInputInterleaver 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.2.1.15 integer read-only
Enables the bit interleaver for hierarchical coding Enumeration: 'nat': 2, 'indepth': 1.
                         excInputCodeRate 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.2.1.16 integer read-only
Coderate can be set separately for HP and LP channel. Enumeration: 'fiveOf6': 4, 'oneOf2': 1, 'sevenOf8': 5, 'threeOf4': 3, 'twoOf3': 2.
                         excInputPacketLength 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.2.1.17 integer32 read-only
The Packet length for the channel.
                         excInputMeasuredDatarate 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.2.1.18 integer32 read-only
The measured datarate of the input.
                         excInputRequiredDatarate 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.2.1.19 integer32 read-only
The required datarate of the input.
                         excInputMaximumDelay 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.2.1.20 integer32 read-only
Period of time between the signal leaving the play-out center (MIP inserter) and its regular transmission at the antenna. This delay is set in the MIP inserter and serves as a basis for all the transmitters in the SFN.
                 ostTable 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3 no-access
The table of racks.
                     ostEntry 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1 no-access
A row (an entry) for one rack.
                         ostIdx 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.1 indexab no-access
The dedicated outputstage (A/B).
                         ostRackIdx 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.2 indexrack no-access
The rack number (1..10).
                         ostRackInletTemperature 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.3 floatingpoint read-only
The inlet temperature.
                         ostRackOutletTemperature 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.4 floatingpoint read-only
The outlet temperature.
                         ostRackAuxPowerSupply 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.5 floatingpoint read-only
Control voltage of auxiliary power supply of the designated rack. The value should be between 11.1 to 13.2 V.
                         ostRackAmpIdx 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.400 indexamplifier no-access
Amplifier Index
                         ostRackAmpI1A 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.401 floatingpoint read-only
The power amplifier module current (I_1A).
                         ostRackAmpI2A 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.402 floatingpoint read-only
The power amplifier module current (I_2A).
                         ostRackAmpI3A 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.403 floatingpoint read-only
The power amplifier module current (I_3A).
                         ostRackAmpI4A 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.404 floatingpoint read-only
The power amplifier module current (I_4A).
                         ostRackAmpI1B 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.405 floatingpoint read-only
The power amplifier module current (I_1B).
                         ostRackAmpI2B 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.406 floatingpoint read-only
The power amplifier module current (I_2B).
                         ostRackAmpI3B 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.407 floatingpoint read-only
The power amplifier module current (I_3B).
                         ostRackAmpI4B 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.408 floatingpoint read-only
The power amplifier module current (I_4B).
                         ostRackAmpIDrv 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.409 floatingpoint read-only
The driver module current (I_DRV).
                         ostRackAmpUDc 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.410 floatingpoint read-only
The power amplifier supply voltage.
                         ostRackAmpIDc 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.411 floatingpoint read-only
The power amplifier supply current.
                         ostRackAmpUDcControl 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.412 floatingpoint read-only
The power supply control voltage.
                         ostRackAmpUReg 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.413 floatingpoint read-only
The power amplifier AGC voltage.
                         ostRackAmpPowerA 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.414 floatingpoint read-only
The voltage power detector A.
                         ostRackAmpPowerB 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.415 floatingpoint read-only
The voltage power detector B.
                         ostRackAmpPowerOut 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.416 floatingpoint read-only
The voltage forward power detector.
                         ostRackAmpPowerReflection 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.417 floatingpoint read-only
The voltage reflected power detector.
                         ostRackAmpPowerReference 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.418 floatingpoint read-only
The reference voltage for output power.
                         ostRackAmpDeltaPhase 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.419 floatingpoint read-only
The measured phase delta for output power.
                         ostRackAmpCmdDeltaPhase 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.3.1.420 floatingpoint read-write
The phase delta setting for output power. The range is -50.0% to 50.0%.
                 exciterStatusTable 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.20 no-access
Exciter status values.
                       exciterStatusEntry 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.20.1 no-access
A row (an entry) for one exciter.
                           excStatusExcIdx 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.20.1.3 indexab no-access
The dedicated exciter (A/B).
                           excStatusRfOutputAgcRegulation 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.20.1.4 floatingpoint read-only
Shows the operating point of the RF regulator. The shown value should be around 50 per cent.
                           excStatusRfIqAdjustAuto 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.20.1.5 integer read-only
Automatic I/Q-Adjust. Enumeration: 'adjusted': 3, 'notAdjusted': 1, 'inProgress': 2.
                           excStatusRfIqAdjustLO1Frequency 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.20.1.6 floatingpoint read-only
Modulator LO1.
                           excStatusNominalPower 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.20.1.7 integer32 read-write
Description.
                           excStatusVSWR 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.20.1.9 floatingpoint read-only
Voltage Standing Wave Ratio
                           excStatusSfnDelayProcessing 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.20.1.13 floatingpoint read-only
The Minimum signal transmit time through the exciter. This delay depends on the DVB transmission parameters.
                           excStatusSfnDelayDynamic 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.20.1.14 floatingpoint read-only
The period of time by which signal processing is artificially delayed so that the desired time of transmission is obtained.
                           excStatusSfnDelayNetwork 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.20.1.15 floatingpoint read-only
The signal propagation time between the play-out center (MIP inserter) and the exciter input. This delay depends on the transmission path used.
                           excStatusSfnDelayTxOffset 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.20.1.16 floatingpoint read-only
An individual transmitter specific delay. It can be adjusted via data carousel of the SFN adapter. It is true for a specific transmitter address.
                           excStatusSfnDelayMaximum 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.20.1.17 floatingpoint read-only
The period of time between the signal leaving the play-out center (MIP inserter) and its regular transmission at the antenna. This delay is set in the MIP inserter and serves as a basis for all the transmitters in the SFN.
                           excStatusSfnDelayTotal 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.20.1.18 floatingpoint read-only
The actual signal transit time through the exciter. This is derived from the sum of static-, dynamic-, offset- and processing delay.
                           excStatusAmplifierControl 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.20.1.20 integer read-only
Amplifier control status Enumeration: 'on': 1, 'off': 2.
                           excStatusReqDataRateHP 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.20.1.30 integer32 read-only
Required data rate on HP input with respect to the current TPS settings.
                           excStatusReqDataRateLP 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.20.1.31 integer32 read-only
Required data rate on LP input with respect to the current TPS settings.
                           excStatusFailDelay 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.20.1.40 faildelaystatus read-only
Shows whether the fail delay time is qualified.
                 exciterPrecorrectionTable 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.21 no-access
Exciter status values.
                       exciterPrecorrectionEntry 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.21.1 no-access
A row (an entry) for one exciter.
                           excPrecExcIdx 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.21.1.3 indexab no-access
The dedicated exciter (A/B).
                           excPrecLinCorrection 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.21.1.4 switchonoff read-write
Switches on/turns off the linear precorrector.
                           excPrecLinAutomaticADE 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.21.1.5 integer read-write
Enables /disables the automatic precorrector. To get the ADE in work linear precorrection has to be switched on. Enumeration: 'automatic': 2, 'adaptive': 3, 'manual': 1.
                           excPrecLinMaxAmplitudeRipple 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.21.1.6 floatingpoint read-write
Sets te maximum ripple for automatic amplitude correction (0.0 ... 2.0).
                           excPrecLinMaxGroupDelayRipple 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.21.1.7 integer32 read-write
Sets the maximum ripple for automatic group delay correction.
                           excPrecLinAmplitudeRipple 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.21.1.8 floatingpoint read-only
Shows the current amplitude ripple.
                           excPrecLinGroupDelayRipple 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.21.1.9 integer32 read-only
Shows the current group delay ripple.
                           excPrecLinInputLevel 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.21.1.10 integer read-only
Shows the state of the feedback signal from the measurement point between output stage and antenna. Enumeration: 'tooHigh': 1, 'ok': 2, 'tooLow': 3, 'failure': 4.
                           excPrecLinAutomatic 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.21.1.11 integer read-only
Shows if the automatic precorrector works properly. Enumeration: 'disabled': 1, 'active': 2, 'calculate': 3, 'measure': 4.
                           excPrecNonlinCorrection 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.21.1.12 switchonoff read-write
Switches on/turns off the nonlinear precorrector.
                           excPrecNonlinAutomaticADE 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.21.1.13 integer read-write
Enables /disables the automatic precorrector. To get the ADE in work nonlinear precorrection has to be switched on. Enumeration: 'automatic': 2, 'adaptive': 3, 'manual': 1.
                           excPrecNonlinThresholdShoulders 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.21.1.14 floatingpoint read-write
The target shoulder distance for ADE (0.0 ... 40.0).
                           excPrecNonlinShoulderLeft 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.21.1.15 floatingpoint read-only
Displays the current measurement for the left handed shoulder distance.
                           excPrecNonlinShoulderRight 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.21.1.16 floatingpoint read-only
Displays the current measurement of the right handed shoulder.
                           excPrecNonlinInputLevel 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.21.1.17 integer read-only
Shows the state of the feedback signal from the measurement point between output stage and antenna. Enumeration: 'tooHigh': 1, 'ok': 2, 'tooLow': 3, 'failure': 4.
                           excPrecNonlinAutomatic 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.21.1.18 integer read-only
Shows if the automatic precorrector works properly. Enumeration: 'disabled': 1, 'active': 2, 'calculate': 3, 'measure': 4.
                           excPrecUserState 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.21.1.100 equalizercalibrationstate read-only
status of the user precorrection settings
                           excPrecFactoryState 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.21.1.101 equalizercalibrationstate read-only
status of the factory precorrection settings
                           excPrecRestoreCurrentSettings 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.21.1.102 integer read-write
restores current factory precorrection setting Enumeration: 'start': 2, 'stop': 1.
                           excPrecRestoreAllSettings 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.21.1.103 integer read-write
restores all factory precorrection settings Enumeration: 'start': 2, 'stop': 1.
                 configurationTable 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.30 no-access
Table for Type Configuration parameters.
                       configurationEntry 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.30.1 no-access
An entry for the Type Configuration parameters.
                           configTvStandardIdx 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.30.1.3 tvstandard no-access
The index for the TV standard.
                           configTvStandardName 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.30.1.5 tvstandard read-only
The name of the TV standard as a text.
                           configRxFrequency 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.30.1.6 integer32 read-write
The input frequency for input 1.
                           configFrequency 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.30.1.7 integer32 read-write
The output frequency for input 1.
                           configPower 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.30.1.8 floatingpoint read-write
The output power (0.0 ... 2500.0) for input 1.
                           configInputSource 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.30.1.9 inputsource read-write
The source for input 1.
                 timeSchedulerTable 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.31 no-access
Table for Time Scheduler parameters.
                       timeSchedulerEntry 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.31.1 no-access
An entry in the table for the Time Scheduler parameters. A row in this table is created by setting the value of schedulerRowStatus to 'createAndGo' or 'createAndWait'. A row in this table is deleted by setting the value of schedulerRowStatus to 'destroy'.
                           schedulerDateTimeIdx 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.31.1.3 dateandtime no-access
The DateAndTime index. Note: Deci-seconds different from 0 and UTC values are ignored. The index is implemented as a Fixed length string of 8 components. The last component (Deci-seconds) is always 0. Example: The DateTime of 2008-9-15,17:45:30.0 has the index: 7.216.9.15.17.45.30.0
                           schedulerRowStatus 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.31.1.5 rowstatus read-only
This object is used to create and delete rows in the timeSchedulerTable.
                           schedulerEvent 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.31.1.6 integer read-only
The event type. Enumeration: 'daily': 1, 'once': 2.
                           schedulerDateTime 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.31.1.7 dateandtime read-only
The start date and the time of a daily or one-time event.
                           schedulerTvStandard 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.31.1.8 tvstandard read-only
The TV standard.
                 configuration2Table 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.32 no-access
Table for Type Configuration parameters of input 2.
                       configuration2Entry 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.32.1 no-access
An entry for the Type Configuration parameters of input 2.
                           config2TvStandardName 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.32.1.5 tvstandard read-only
The name of the TV standard as a text.
                           config2RxFrequency 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.32.1.6 integer32 read-write
The input frequency for input 2.
                           config2Frequency 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.32.1.7 integer32 read-write
The output frequency for input 2.
                           config2Power 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.32.1.8 floatingpoint read-write
The output power (0.0 ... 2500.0) for input 2.
                           config2InputSource 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.32.1.9 inputsource read-write
The source for input 2.
                 productInfoTable 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.100 no-access
The table for product typeplates.
                         productInfoEntry 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.100.1 no-access
A row (an entry) for one typeplate.
                             prodInfoModuleIdx 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.100.1.1 prodinfomodulenametv no-access
The module index.
                             prodInfoDeviceIdx 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.100.1.2 indexab no-access
The dedicated device (A/B).
                             prodInfoRackIdx 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.100.1.3 indexrack no-access
The rack number (1..10).
                             prodInfoAmpIdx 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.100.1.4 indexamplifier no-access
Amplifier Index
                             prodInfoModuleName 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.100.1.5 prodinfomodulenametv read-only
The name of the module as a text.
                             prodInfoSerialNumber 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.100.1.6 readablestring read-only
The serial number of the subdevice.
                             prodInfoIdentNumberSW 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.100.1.7 readablestring read-only
The Rohde&Schwarz identification number of the software, for example 2094.2090.02.
                             prodInfoVersionNumberSW 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.100.1.8 readablestring read-only
The Rohde&Schwarz revision number of the software, for example 1.2.1.
                             prodInfoIdentNumberHW 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.100.1.9 readablestring read-only
The Rohde&Schwarz identification number of the hardware, for example 2095.8007.02 (NetCCU).
                             prodInfoVersionNumberHW 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.100.1.10 readablestring read-only
The Rohde&Schwarz revision number (product index) of the hardware, for example 03.03.
                             productInfoProductDateHW 1.3.6.1.4.1.2566.127.1.2.167.4.1.3.100.1.11 dateandtime read-only
The Rohde&Schwarz production date of the hardware,
             logbook 1.3.6.1.4.1.2566.127.1.2.167.4.1.4
                 netCCUNumberOfEntries 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.1 logbookmaxentrynumber read-only
The number of entries in logbook.
                 netCCULogbookClear 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.2 trigger read-write
Clear the logbook. idle(1) --> ready clear(2) --> do clear now A GET will always return idle(1). A SET idle(1) will return NO_ERROR without doing anything.
                 netCCULogbookTable 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.3 no-access
NetCCU logbook table.
                     netCCULogbookEntry 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.3.1 no-access
This is a entry in the logbook.
                         netCCULogbookEntryIdx 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.3.1.1 logbookmaxentrynumber no-access
This is an increasing number from 1 to maximum. It is used as an index column for SNMP.
                         netCCULogbookEntryNbr 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.3.1.2 logbookmaxentrynumber read-only
This is the number of the logbook entry. It is an decreasing number from maximum down to 1.
                         netCCULogbookType 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.3.1.3 eventclass read-only
Can either be Fault, Warning or State.
                         netCCULogbookSlope 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.3.1.4 logbookentryslope read-only
Either set (event raises) or reset (event disappears)
                         netCCULogbookMessage 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.3.1.5 logbookentrymessagesnetccu read-only
See RS-XX8000-COMMON-MIB - TextualConvention - LogbookEntryMessagesNetCCU for details.
                         netCCULogbookDateTime 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.3.1.6 dateandtime read-only
netCCULogbookDateTime
                 exciterANumberOfEntries 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.4 logbookmaxentrynumber read-only
The number of entries in logbook.
                 exciterALogbookClear 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.5 trigger read-write
Clear the logbook. idle(1) --> ready clear(2) --> do clear now A GET will always return idle(1). A SET idle(1) will return NO_ERROR without doing anything.
                 exciterALogbookTable 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.6 no-access
ExciterA logbook table.
                     exciterALogbookEntry 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.6.1 no-access
This is a entry in the logbook.
                         excALogbookEntryIdx 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.6.1.1 logbookmaxentrynumber no-access
This is an increasing number from 1 to maximum. It is used as an index column for SNMP.
                         excALogbookEntryNbr 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.6.1.2 logbookmaxentrynumber read-only
This is the number of the logbook entry. It is an decreasing number from maximum down to 1.
                         excALogbookType 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.6.1.3 eventclass read-only
Can either be Fault, Warning or State.
                         excALogbookSlope 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.6.1.4 logbookentryslope read-only
Either set (event raises) or reset (event disappears)
                         excALogbookMessage 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.6.1.5 logbookentrymessagesexctv read-only
See RS-XX8000-COMMON-MIB - TextualConvention for details.
                         excALogbookDateTime 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.6.1.6 dateandtime read-only
The time of the logbook entry.
                 outputstageANumberOfEntries 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.7 logbookmaxentrynumber read-only
The number of entries in logbook.
                 outputstageALogbookClear 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.8 trigger read-write
Clear the logbook. idle(1) --> ready clear(2) --> do clear now A GET will always return idle(1). A SET idle(1) will return NO_ERROR without doing anything.
                 outputstageALogbookTable 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.9 no-access
OutputstageA logbook table.
                     outputstageALogbookEntry 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.9.1 no-access
This is a entry in the logbook.
                         ostALogbookEntryIdx 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.9.1.1 logbookmaxentrynumber no-access
This is an increasing number from 1 to maximum. It is used as an index column for SNMP.
                         ostALogbookEntryNbr 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.9.1.2 logbookmaxentrynumber read-only
This is the number of the logbook entry. It is an decreasing number from maximum down to 1.
                         ostALogbookType 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.9.1.3 eventclass read-only
Can either be Fault, Warning or State.
                         ostALogbookSlope 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.9.1.4 logbookentryslope read-only
Either set (event raises) or reset (event disappears)
                         ostALogbookMessage 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.9.1.5 logbookentrymessagesost read-only
See RS-XX8000-COMMON-MIB - TextualConvention for details.
                         ostALogbookDateTime 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.9.1.6 dateandtime read-only
The time of the logbook entry.
                 exciterBNumberOfEntries 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.10 logbookmaxentrynumber read-only
The number of entries in logbook.
                 exciterBLogbookClear 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.11 trigger read-write
Clear the logbook. idle(1) --> ready clear(2) --> do clear now A GET will always return idle(1). A SET idle(1) will return NO_ERROR without doing anything.
                 exciterBLogbookTable 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.12 no-access
ExciterB logbook table.
                       exciterBLogbookEntry 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.12.1 no-access
This is a entry in the logbook.
                           excBLogbookEntryIdx 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.12.1.1 logbookmaxentrynumber no-access
This is an increasing number from 1 to maximum. It is used as an index column for SNMP.
                           excBLogbookEntryNbr 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.12.1.2 logbookmaxentrynumber read-only
This is the number of the logbook entry. It is an decreasing number from maximum down to 1.
                           excBLogbookType 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.12.1.3 eventclass read-only
Can either be Fault, Warning or State.
                           excBLogbookSlope 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.12.1.4 logbookentryslope read-only
Either set (event raises) or reset (event disappears)
                           excBLogbookMessage 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.12.1.5 logbookentrymessagesexctv read-only
See RS-XX8000-COMMON-MIB - TextualConvention for details.
                           excBLogbookDateTime 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.12.1.6 dateandtime read-only
The time of the logbook entry.
                 outputstageBNumberOfEntries 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.13 logbookmaxentrynumber read-only
The number of entries in logbook.
                 outputstageBLogbookClear 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.14 trigger read-write
Clear the logbook. idle(1) --> ready clear(2) --> do clear now A GET will always return idle(1). A SET idle(1) will return NO_ERROR without doing anything.
                 outputstageBLogbookTable 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.15 no-access
OutputstageB logbook table.
                       outputstageBLogbookEntry 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.15.1 no-access
This is a entry in the logbook.
                           ostBLogbookEntryIdx 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.15.1.1 logbookmaxentrynumber no-access
This is an increasing number from 1 to 128. It is used as an index column for SNMP.
                           ostBLogbookEntryNbr 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.15.1.2 logbookmaxentrynumber read-only
This is the number of the logbook entry. It is an decreasing number from max 128 down to 1.
                           ostBLogbookType 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.15.1.3 eventclass read-only
Can either be Fault, Warning or State.
                           ostBLogbookSlope 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.15.1.4 logbookentryslope read-only
Either set (event raises) or reset (event disappears)
                           ostBLogbookMessage 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.15.1.5 logbookentrymessagesost read-only
See RS-XX8000-COMMON-MIB - TextualConvention for details.
                           ostBLogbookDateTime 1.3.6.1.4.1.2566.127.1.2.167.4.1.4.15.1.6 dateandtime read-only
The time of the logbook entry.
             rfProbesTable 1.3.6.1.4.1.2566.127.1.2.167.4.1.5 no-access
This table contains all commands for the RF probes.
                 rfProbesEntry 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1 no-access
An entry for a designated transmitter and device.
                     rfProbesNetCCURfProbe1 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.1 floatingpoint read-only
Current voltage on RF Probe 1.
                     rfProbesNetCCURfProbe2 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.2 floatingpoint read-only
Current voltage on RF Probe 2.
                     rfProbesAntFwdNominal 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.3 floatingpoint read-write
This sets the nominal value [W] of the transmitter (to antenna).
                     rfProbesAntFwdWarningLimit 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.4 floatingpoint read-write
This sets the warning limit for the transmitters RF control (to antenna).
                     rfProbesAntFwdFailLimit 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.5 floatingpoint read-write
This sets the fault limit for the transmitters RF control (to antenna).
                     rfProbesAntFwdDelayTimeRfFail 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.6 integer32 read-write
This sets the delay time for the RF Fail control (to antenna).
                     rfProbesAntFwdSetOffset 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.7 trigger read-write
This triggers Set Offset.
                     rfProbesAntFwdSetGain 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.8 trigger read-write
This triggers Set Gain.
                     rfProbesAntReflWarningLimit 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.9 floatingpoint read-write
This sets the warning limit for the transmitters reflection control (to antenna).
                     rfProbesAntReflSetOffset 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.10 trigger read-write
This triggers Set Offset.
                     rfProbesAntReflSetGain 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.11 trigger read-write
This triggers Set Gain.
                     rfProbesDLFwdNominal 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.12 floatingpoint read-write
This sets the nominal value [W] of the transmitter (to dummyload).
                     rfProbesDLFwdWarningLimit 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.13 floatingpoint read-write
This sets the warning limit for the transmitters RF control (to dummyload).
                     rfProbesDLFwdFailLimit 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.14 floatingpoint read-write
This sets the fault limit for the transmitters RF control (to dummyload).
                     rfProbesDLFwdDelayTimeRfFail 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.15 integer32 read-write
This sets the delay time for the RF Fail control (to dummyload).
                     rfProbesDLFwdSetOffset 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.16 trigger read-write
This triggers Set Offset.
                     rfProbesDLFwdSetGain 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.17 trigger read-write
This triggers Set Gain.
                     rfProbesDLReflWarningLimit 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.18 floatingpoint read-write
This sets the warning limit for the transmitters reflection control (to dummyload).
                     rfProbesDLReflSetOffset 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.19 trigger read-write
This triggers Set Offset.
                     rfProbesDLReflSetGain 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.20 trigger read-write
This triggers Set Gain.
                     rfProbesOstIdx 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.21 indexab no-access
The dedicated outputstage (A/B).
                     rfProbesOstFwdNominal 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.22 floatingpoint read-write
This sets the nominal value [W] of the outputstage.
                     rfProbesOstFwdWarningLimit 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.23 floatingpoint read-write
This sets the warning limit for the outputstage RF control.
                     rfProbesOstFwdFailLimit 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.24 floatingpoint read-write
This sets the fault limit for the outputstage RF control.
                     rfProbesOstFwdDelayTimeRfFail 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.25 integer32 read-write
This sets the delay time for the outputstage RF Fail control.
                     rfProbesOstFwdSetOffset 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.26 trigger read-write
This triggers Set Offset.
                     rfProbesOstFwdSetGain 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.27 trigger read-write
This triggers Set Gain.
                     rfProbesOstReflWarningLimit 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.28 floatingpoint read-write
This sets the warning limit for the outputstage reflection control.
                     rfProbesOstReflSetOffset 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.29 trigger read-write
This triggers Set Offset.
                     rfProbesOstReflSetGain 1.3.6.1.4.1.2566.127.1.2.167.4.1.5.1.30 trigger read-write
This triggers Set Gain.
             rackTable 1.3.6.1.4.1.2566.127.1.2.167.4.1.6 no-access
This table contains important commands for the racks.
                 rackEntry 1.3.6.1.4.1.2566.127.1.2.167.4.1.6.1 no-access
An entry for a designated rack or rack's rf probe.
                     ostDeviceIdx 1.3.6.1.4.1.2566.127.1.2.167.4.1.6.1.2 indexab no-access
The index to address outputstageA and outputstageB.
                     rackIdx 1.3.6.1.4.1.2566.127.1.2.167.4.1.6.1.3 indexrack no-access
The index to address the racks.
                     rackRfProbeIdx 1.3.6.1.4.1.2566.127.1.2.167.4.1.6.1.4 integer no-access
The index to address forward and reflected RF probes. For not RF probe parameters this index is always 1. Enumeration: 'forward': 1, 'reflected': 2.
                     amplifiersPerRack 1.3.6.1.4.1.2566.127.1.2.167.4.1.6.1.6 integer32 read-only
The number of amplifiers of a rack.
                     rackRfEventSignalling 1.3.6.1.4.1.2566.127.1.2.167.4.1.6.1.7 truthvalue read-write
This configures whether to signal rf events or not.
                     rackReferenceVoltage 1.3.6.1.4.1.2566.127.1.2.167.4.1.6.1.8 floatingpoint read-write
This parameter controls the reference voltage (31.0 ... 100.0).
                     amplifiersPowerSupply 1.3.6.1.4.1.2566.127.1.2.167.4.1.6.1.9 floatingpoint read-write
This parameter controls the power supplies of the amplifier within the rack (31.0 ... 100.0).
                     rackGeneralPurposeInput 1.3.6.1.4.1.2566.127.1.2.167.4.1.6.1.10 integer read-write
Setting of the general purpose input behaviour. Enumeration: 'unused': 1, 'doorOpen': 2, 'extCoolingWarning': 3, 'extCoolingFault': 4.
                     rackOnOff 1.3.6.1.4.1.2566.127.1.2.167.4.1.6.1.20 switchonoff read-write
This switches the rack on/off.
                     rfProbePresent 1.3.6.1.4.1.2566.127.1.2.167.4.1.6.1.50 truthvalue read-only
If the RF probe of this rack is present.
                     rfProbeConfigurationLabel 1.3.6.1.4.1.2566.127.1.2.167.4.1.6.1.51 readablestring read-write
Name for the measured signal on RF Probe.
                     rfProbeConfigurationNominalValue 1.3.6.1.4.1.2566.127.1.2.167.4.1.6.1.52 integer32 read-write
The nominal value of the measured signal.
                     rfProbeThresholdRfFailLimit 1.3.6.1.4.1.2566.127.1.2.167.4.1.6.1.55 floatingpoint read-write
Fault limit for the RF control (-20.0 ... 0.0).
                     rfProbeThresholdTimeoutRfFailCtr 1.3.6.1.4.1.2566.127.1.2.167.4.1.6.1.56 integer32 read-write
Timeout for RF Fail Control.
                     rfProbeThresholdWarningLimit 1.3.6.1.4.1.2566.127.1.2.167.4.1.6.1.57 floatingpoint read-write
Warning limit for the RF control (-20.0 ... 0.0). For reflected probes: Warning limit for the reflection control. This limit is added to the fault limit to generate the real warning limit; e.g. the fault limit is -17.0dB and the warning limit is -3.0dB, so the warning is active on a reflected power higher than -20.0 dB.
                     rfProbeCalibrationGain 1.3.6.1.4.1.2566.127.1.2.167.4.1.6.1.60 floatingpoint read-only
Measured value of gain calibration.
                     rfProbeCalibrationOffset 1.3.6.1.4.1.2566.127.1.2.167.4.1.6.1.61 floatingpoint read-only
Measured value of offset calibration.
                     rfProbeCalibrationSetGain 1.3.6.1.4.1.2566.127.1.2.167.4.1.6.1.62 trigger read-write
Sets the gain calibration.
                     rfProbeCalibrationSetOffset 1.3.6.1.4.1.2566.127.1.2.167.4.1.6.1.63 trigger read-write
Sets the offset calibration.
                     rfProbeMeasuredValue 1.3.6.1.4.1.2566.127.1.2.167.4.1.6.1.65 floatingpoint read-only
Measured forward/reflected power of antenna signal.
             sx801AmplifierTable 1.3.6.1.4.1.2566.127.1.2.167.4.1.7 no-access
Amplifier status values for SX801 amplifiers.
                 sx801AmplifierEntry 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1 no-access
A row (an entry) for one amplifier.
                     sx801AmpIdx 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.1 indexamplifier no-access
The amplifier index.
                     sx801AmpRfOut 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.2 sx801amplifierstate read-only
Shows if the amplifier generates an RF or not. off(1): The amplifier output is switched off e.g. because the amplifier gets no input signal or the transmitter has been switched off warning(2): There is an RF but its level is less than the RF warning limit. ok(3): The RF level is greater than the RF warning limit.
                     sx801AmpRfIn 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.3 sx801amplifierstate read-only
Displays the state of the amplifier input. off(1): no input signal detected warning(2): the level of the input signal is too low or too high. ok(3): input signal is OK.
                     sx801AmpReflection 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.4 integer read-only
A reflection on RF output of this Amplifier module has been detected. This leads to a reduction of output power of the amplifier. Enumeration: 'unknown': 3, 'warning': 2, 'off': 1, 'fault': 4.
                     sx801AmpOn 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.5 integer read-only
Shows if the amplifier has been switched on by the control unit. Enumeration: 'on': 3, 'off': 1, 'unknown': 4.
                     sx801AmpAC 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.6 sx801amplifierstate read-only
Shows the state of primary voltage of the power supply.
                     sx801AmpCommunication 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.7 integer read-only
Displays if the CAN communication between amplifier and Sx801 is working or not. Enumeration: 'unknown': 2, 'off': 1, 'ok': 3, 'fault': 4.
                     sx801AmpTransistor 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.8 sx801amplifierstate read-only
A transistor fail is displayed here. For further information please see the amplifiers service menue.
                     sx801AmpDriver 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.9 sx801amplifierstate read-only
Shows a failure if one of the internal driver transistors does not work properly. For further information please see the amplifiers service menue.
                     sx801AmpTemperature 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.10 sx801amplifierstate read-only
Shows a fault if the temperature of amplifier module is too high.
                     sx801AmpBlower 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.11 sx801amplifierstate read-only
Displays the state of the internal blowers.
                     sx801AmpRegulation 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.12 sx801amplifierstate read-only
Shows a fault if the amplifier is not able to control its output power.
                     sx801AmpUpdate 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.13 truthvalue read-only
Firmware update is in progress. This will be started automatically during a software update procedure of the transmitter.
                     sx801Supply1Temperature 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.14 sx801amplifierstate read-only
Shows a fault if the temperature of power supply one is too high.
                     sx801Supply2Temperature 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.15 sx801amplifierstate read-only
Shows a fault if the temperature of power supply two is too high.
                     sx801SupplyRTemperature 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.16 sx801amplifierstate read-only
Shows a fault if the temperature of the reserve power supply is too high.
                     sx801Supply1DC 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.17 sx801amplifierstate read-only
Shows a fault if the output voltage of power supply one is not ok.
                     sx801Supply2DC 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.18 sx801amplifierstate read-only
Shows a fault if the output voltage of power supply two is not ok.
                     sx801SupplyRDC 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.19 sx801amplifierstate read-only
Shows a fault if the output voltage of the reserve power supply is not ok.
                     sx801AmpValueI1 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.50 floatingpoint read-only
The internal current from transistor pair 1.
                     sx801AmpValueI2 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.51 floatingpoint read-only
The internal current from transistor pair 2.
                     sx801AmpValueI3 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.52 floatingpoint read-only
The internal current from transistor pair 3.
                     sx801AmpValueI4 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.53 floatingpoint read-only
The internal current from transistor pair 4.
                     sx801AmpValueIPre 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.54 floatingpoint read-only
The internal current from preamplifier.
                     sx801AmpValueIDrv1 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.55 floatingpoint read-only
The internal current from driver transistor pair 1.
                     sx801AmpValueIDrv2 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.56 floatingpoint read-only
The internal current from driver transistor pair 2.
                     sx801AmpValuePowerOut 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.57 floatingpoint read-only
The base value in Volt to calculate the output power of this amplifier module.
                     sx801AmpValueReflection 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.58 floatingpoint read-only
The base value in Volt for detection of reflections.
                     sx801AmpValueVRef 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.59 floatingpoint read-only
The internal reference voltage to set the output power.
                     sx801AmpValueVReg 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.60 floatingpoint read-only
The internal value for output power regulation.
                     sx801AmpValueTemperature 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.61 floatingpoint read-only
The internal temperature of Amplifier. In case of L-band amplifier, the shown temperature is valid only, if the amplifier is switched on.
                     sx801AmpValueMonAtt 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.62 floatingpoint read-only
The attenuation of monitoring output on the front of the amplifier module (Amp RF Mon).
                     sx801AmpValueVAux1 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.63 floatingpoint read-only
The voltage power detector 1.
                     sx801AmpValueVAux2 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.64 floatingpoint read-only
The voltage power detector 2.
                     sx801Supply1ValuePwr 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.65 floatingpoint read-only
The power supply one control voltage.
                     sx801Supply2ValuePwr 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.66 floatingpoint read-only
The power supply two control voltage.
                     sx801Supply1ValueDc 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.67 floatingpoint read-only
The internal supply voltage of transistor path two. In systems with two power supplies this value is equal to the output voltage of supply one.
                     sx801Supply2ValueDc 1.3.6.1.4.1.2566.127.1.2.167.4.1.7.1.68 floatingpoint read-only
The internal supply voltage of transistor path two. In systems with two power supplies this value is equal to the output voltage of supply two.
         rsXx8000DvbTxEvents 1.3.6.1.4.1.2566.127.1.2.167.4.3
             eventTx 1.3.6.1.4.1.2566.127.1.2.167.4.3.2
                 eventsTxV2 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0
Compatibility to SMIv1.
                     txSummaryFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.1
Transmitter Summary Fault
                     txSummaryWarning 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.2
Transmitter Summary Warning
                     txLocal 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.3
Transmitter Local/Remote
                     txRfOn 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.4
Transmitter RF On/Off
                     txRfOk 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.5
Transmitter RF Ok / Not OK
                     txParamSetSubDeviceDiffers 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.6
Parameterset of subdevice is different. The currently loaded parameterset is inconsistent because a subdevice (e.g. an exciter) has a different configuration than expected. To correct this, save settings to the current or save a complete new.
                     txParamSetValuesChanged 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.7
Value Of Current Parameterset Changed. The currently loaded parameterset is inconsistent because there were changes happening since the load/save of it. To correct this, save settings to the current or save a complete new.
                     txRfLoopProgram 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.8
NetCCU Loop Program
                     txRfLoopReserve 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.9
NetCCU Loop Reserve
                     txRfWarning 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.10
NetCCU RF Warning
                     txReflectionWarning 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.11
NetCCU Reflection Warning
                     txNetCCUFanFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.12
NetCCU Fan Fault. This is valid, if Fan Control is switched on (see menu NetCCU Setup - Common).
                     txNetCCUPowerSupply 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.13
NetCCU Power Supply
                     txRfFail 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.14
NetCCU RF Fail
                     txReflectionFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.15
NetCCU Reflection Fault
                     txNetCCUBoardTemperatureFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.16
NetCCU Board Temperature Fault deprecated: this information is now handled as a warning (txNetCCUBoardTemperatureWarning)
                     txNetCCUNoConnectionToExcA 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.17
NetCCU Connection To ExciterA Faulty
                     txNetCCUNoConnectionToOstA 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.18
NetCCU Connection To OutputstageA Faulty
                     txNetCCUNoConnectionToExcB 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.19
NetCCU Connection To ExciterB Faulty
                     txNetCCUNoConnectionToOstB 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.20
NetCCU Connection To OutputstageB Faulty
                     txAutomaticExcReady 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.21
Exciter Automatic Ready.
                     txAutomaticExcChanged 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.22
Exciter Automatic Changed.
                     txAutomaticExcFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.23
Exciter Automatic Fault.
                     txAutomaticOstReady 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.24
Outputstage Automatic Ready. This paramter is only available for systems with an automatic output switch.
                     txAutomaticOstChanged 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.25
Outputstage Automatic Changed. This paramter is only available for systems with an automatic output switch.
                     txAutomaticOstFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.26
Outputstage Automatic Fault. This paramter is only available for systems with an automatic output switch.
                     txNetCCUBoardTemperatureWarning 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.27
NetCCU Board Temperature Warning
                     txInternalPowerSupplyWarning 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.30
NetCCU internal Power Supply warning
                     txExternalPowerSupplyWarning 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.31
NetCCU external (additional) Power Supply warning
                     txModeSwitchOverStarted 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.35
Switch over of TX mode started.
                     txModeSwitchOverEnded 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.36
Switch over of TX mode ended.
                     txModeInconsistent 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.37
An inconsistency in configuration of TX mode was detected. The CCU and exiter configurations are incompatible.
                     txModeSwitchOverFailed 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.38
Switch over of TX mode failed. Please check whether the configurations of CCU and exciter are correct.
                     txExcSummaryFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.100
Exciter Summary Fault
                     txExcSummaryWarning 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.101
Exciter Summary Warning
                     txExcLocal 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.102
Exciter Local/Remote
                     txExcRfOk 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.104
Exciter RF Ok
                     txExcInputNoConnectHP1 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.105
Exciter Input HP1 has no connected input signal
                     txExcInputNoConnectLP1 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.106
Exciter Input LP1 has no connected input signal
                     txExcInputNoConnectHP2 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.107
Exciter Input HP2 has no connected input signal
                     txExcInputNoConnectLP2 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.108
Exciter Input LP2 has no connected input signal
                     txExcInputActiveHP1 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.109
Exciter Input HP1 is active
                     txExcInputActiveLP1 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.110
Exciter Input LP1 is active
                     txExcInputActiveHP2 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.111
Exciter Input HP2 is active
                     txExcInputActiveLP2 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.112
Exciter Input LP2 is active
                     txExcOn 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.113
Exciter On
                     txExcRfOn 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.114
Exciter RF On
                     txExcNoInput 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.115
Exciter has no valid input signal.
                     txExcRfLoop 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.116
Exciter RF loop
                     txExcRfFail 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.117
Exciter RF Fail
                     txExcSelfTest 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.118
Exciter hardware self test
                     txExcOutputOpen 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.119
Exciter output open
                     txExcBoardTemperatureWarning 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.120
Exciter Board Temperature
                     txExcFanWarning 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.121
Exciter has one faulty fan
                     txExcFanFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.122
Both exciter fans are faulty.
                     txExcFifoWarning 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.123
Exciter Fifo
                     txExcTestSignal 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.124
Exciter Testsignal Active
                     txExcSFNDelay 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.125
Exciter SFN Delay Fault
                     txExcWrongDatarate 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.126
Exciter Wrong Datarate
                     txExcMute 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.127
Exciter Mute
                     txExcPPSFail 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.128
Exciter PPS Fail
                     txExcReferenceFail 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.129
Exciter Reference Fail
                     txExcMIPFail 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.130
Exciter MIP Fail
                     txExcInputAutomaticSwitchReady 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.131
Input automatic is ready.
                     txExcInputAutomaticChangedOver 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.132
Input automatic changed over.
                     txExcInputReseveMissing 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.133
Missing input, or automatic switching enabled with only one input present. Disable automatic switching or press reset fault to remove this warning. Monitoring of a second input will start automatically if two input signals have been detected. This event will be generated only if cmdExcExpectInputReserve is set to on(1).
                     txOstSummaryFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.200
Outputstage Summary Fault
                     txOstSummaryWarning 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.201
Outputstage Summary Warning
                     txOstRfOn 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.202
Outputstage RF On
                     txOstRfOk 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.203
Outputstage RF Ok
                     txOstNoInput 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.204
Outputstage no input signal
                     txOstRfWarning 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.205
Outputstage RF Warning
                     txOstReflectionWarning 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.206
Outputstage Reflection Warning
                     txOstRackWarning 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.207
Outputstage Rack Warning. At least one rack has an error pending.
                     txOstCoolingWarning 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.208
Outputstage Cooling Warning
                     txOstRfFail 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.209
Outputstage RF Fail
                     txOstReflectionFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.210
Outputstage Reflection Fault
                     txOstACFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.211
Outputstage AC Fault
                     txOstCoolingFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.212
Outputstage Cooling Fault
                     txOstCommFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.213
Outputstage Communication Fault
                     txRackSumFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.300
Summary Fault at a designated rack. This event automatically leads to txOstRackWarning.
                     txRackSumWarning 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.301
Summary Warning at a designated rack.
                     txRackOn 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.302
The designated racks operation mode is on.
                     txRackGpiWarning 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.303
A warning on the general purpose input occurred. This depends on the current configuration of the GPI. (See:Rack Setup/Rack Controller)
                     txRackFan1Fault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.304
The designated rack signals a fault of fan 1.
                     txRackFan2Fault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.305
The designated rack signals a fault of fan 2.
                     txRackCoolingSumWarning 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.306
The designated rack signals a summary cooling warning.
                     txRackAmplifierSumFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.307
The designated rack signals at least one faulty amplifier.
                     txRackNoLink 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.308
No communication to the designated rack.
                     txRackGpiFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.309
A fault on the general purpose input occurred. This depends on the current configuration of the GPI. (See:Rack Setup/Rack Controller)
                     txRackTemperatureFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.310
The designated rack signals a temperature fault - temperature too high.
                     txRackACFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.311
The designated rack signals an AC (phase) fault.
                     txRackCoolingSumFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.312
The designated rack signals a summary cooling fault.
                     txRackTempFaultAbs1 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.313
The designated rack signals a temperature fault of absorber 1.
                     txRackTempFaultAbs2 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.314
The designated rack signals a temperature fault of absorber 2.
                     txRackDCFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.315
The designated rack signals a DC fault.
                     txRackRfOn 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.318
RF power is on.
                     txRackRfOk 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.319
RF power is ok.
                     txRackRfWarning 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.320
RF power decreased the warning threshold.
                     txRackRfFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.321
RF output power decreased the fault threshold.
                     txRackReflectionWarning 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.322
The reflected power increased the warning threshold
                     txRackReflectionFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.323
The reflected power increased the fault threshold.
                     txRackProbeNotCalibrated 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.330
At least one probe is not calibrated.
                     txRackTemperatureWarning 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.331
Rack temperature exceeded the warning threshold.
                     txRackOvervoltProtectWarning 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.335
Overvoltage protection is out of order.
                     txAmpSumFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.400
The designated amplifier signals summary fault.
                     txAmpSumWarning 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.401
The designated amplifier signals summary warning.
                     txAmpPowerOn 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.402
The designated amplifiers power is on.
                     txAmpDCOk 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.403
The designated amplifiers DC is ok.
                     txAmpACOk 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.404
The designated amplifiers AC is ok.
                     txAmpRfInFail 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.405
The designated amplifier signals RF input fail.
                     txAmpRfFail 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.406
The designated amplifier signals RF fail.
                     txAmpReflectionFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.407
The designated amplifier signals a reflection fault.
                     txAmpTemperatureFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.408
The designated amplifier signals a temperature fault - temperature is too high.
                     txAmpTransistorFault 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.0.409
The designated amplifier signals at least one faulty transistor.
                 eventsTxTable 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.1 no-access
This table contains necessary information for handling alarms. For each alarm you have the following information: - name (get), - mask to enable/disable sending out (set/get), - priority (set/get) and - the current state (get only).
                     eventsTxEntry 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.1.1 no-access
An event entry always consists of its indexes (used for addressing within redundancy systems) and 3 values: - name: an enumerated list of all possible notifications - mask: the corresponding mask (enable/disable) - priority: the corresponding priority (value in range 0..255) - event: the event itself (active/inactive)
                         eventTxABIdx 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.1.1.1 integer no-access
The value for the module A (exciterA, outputstageA) or B (exciterB, outputstageB) for alarms. This is a helper column and therefore not-accessible. Enumeration: 'a': 1, 'b': 2.
                         eventTxRackIdx 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.1.1.2 integer32 no-access
The number of the designated rack. This is a helper column and therefore not-accessible.
                         eventTxAmpIdx 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.1.1.3 integer32 no-access
The number of the designated amplifier. This is a helper column and therefore not-accessible.
                         eventTxNameIdx 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.1.1.4 eventmaxentrynumber no-access
The event number as integer. This is a helper column and therefore not-accessible.
                         eventTxName 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.1.1.5 integer read-only
The event number as integer and the value as readable text. The enumeration correlates with the notifications under eventsTxV2. Enumeration: 'txRackRfFault': 321, 'txExternalPowerSupplyWarning': 31, 'txRackNoLink': 308, 'txModeSwitchOverFailed': 38, 'txRackProbeNotCalibrated': 330, 'txRfFail': 14, 'txOstSummaryFault': 200, 'txExcFifoWarning': 123, 'txOstCoolingWarning': 208, 'txInternalPowerSupplyWarning': 30, 'txAmpDCOk': 403, 'txOstRfFail': 209, 'txExcTestSignal': 124, 'txExcInputActiveLP1': 110, 'txNetCCUNoConnectionToExcB': 19, 'txNetCCUNoConnectionToExcA': 17, 'txRackAmplifierSumFault': 307, 'txRackTempFaultAbs2': 314, 'txExcLocal': 102, 'txRackTempFaultAbs1': 313, 'txAmpTemperatureFault': 408, 'txRackDCFault': 315, 'txRackCoolingSumFault': 312, 'txAutomaticOstChanged': 25, 'txNetCCUNoConnectionToOstB': 20, 'txAutomaticOstFault': 26, 'txNetCCUNoConnectionToOstA': 18, 'txAmpPowerOn': 402, 'txRackGpiWarning': 303, 'txAmpTransistorFault': 409, 'txRackCoolingSumWarning': 306, 'txExcSelfTest': 118, 'txExcOn': 113, 'txExcPPSFail': 128, 'txOstRfWarning': 205, 'txOstSummaryWarning': 201, 'txExcRfFail': 117, 'txReflectionFault': 15, 'txExcNoInput': 115, 'txSummaryFault': 1, 'txAmpRfFail': 406, 'txRfOn': 4, 'txRfOk': 5, 'txExcInputActiveHP2': 111, 'txExcInputActiveHP1': 109, 'txRackSumWarning': 301, 'txExcBoardTemperatureWarning': 120, 'txExcRfOk': 104, 'txExcFanWarning': 121, 'txAutomaticExcChanged': 22, 'txExcFanFault': 122, 'txExcInputReseveMissing': 133, 'txRfWarning': 10, 'txModeSwitchOverEnded': 36, 'txAmpSumWarning': 401, 'txNetCCUFanFault': 12, 'txExcInputAutomaticChangedOver': 132, 'txParamSetValuesChanged': 7, 'txNetCCUBoardTemperatureFault': 16, 'txAmpSumFault': 400, 'txExcWrongDatarate': 126, 'txOstNoInput': 204, 'txModeInconsistent': 37, 'txRackReflectionFault': 323, 'txRackGpiFault': 309, 'txRackSumFault': 300, 'txOstRfOk': 203, 'txOstRfOn': 202, 'txRackOn': 302, 'txExcReferenceFail': 129, 'txExcSummaryWarning': 101, 'txExcRfOn': 114, 'txRackFan1Fault': 304, 'txAutomaticExcFault': 23, 'txRackTemperatureFault': 310, 'txReflectionWarning': 11, 'txExcMIPFail': 130, 'txExcOutputOpen': 119, 'txExcInputActiveLP2': 112, 'txRackRfOn': 318, 'txRackRfOk': 319, 'txOstACFault': 211, 'txRfLoopProgram': 8, 'txAmpReflectionFault': 407, 'txRackRfWarning': 320, 'txExcInputNoConnectHP2': 107, 'txExcInputNoConnectHP1': 105, 'txExcMute': 127, 'txOstRackWarning': 207, 'txRackTemperatureWarning': 331, 'txAmpRfInFail': 405, 'txParamSetSubDeviceDiffers': 6, 'txAutomaticExcReady': 21, 'txRackFan2Fault': 305, 'txExcSFNDelay': 125, 'txOstCommFault': 213, 'txNetCCUBoardTemperatureWarning': 27, 'txLocal': 3, 'txRackACFault': 311, 'txRackReflectionWarning': 322, 'txExcRfLoop': 116, 'txExcSummaryFault': 100, 'txExcInputNoConnectLP2': 108, 'txExcInputNoConnectLP1': 106, 'txAmpACOk': 404, 'txOstCoolingFault': 212, 'txOstReflectionWarning': 206, 'txOstReflectionFault': 210, 'txRfLoopReserve': 9, 'txModeSwitchOverStarted': 35, 'txAutomaticOstReady': 24, 'txSummaryWarning': 2, 'txRackOvervoltProtectWarning': 335, 'txExcInputAutomaticSwitchReady': 131, 'txNetCCUPowerSupply': 13.
                         eventTxMask 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.1.1.6 eventmask read-write
See TextualConvention for details.
                         eventTxPriority 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.1.1.7 eventpriority read-write
See TextualConvention for details.
                         eventTxEvent 1.3.6.1.4.1.2566.127.1.2.167.4.3.2.1.1.8 eventstate read-only
See TextualConvention for details.
         rsXx8000DvbTxConf 1.3.6.1.4.1.2566.127.1.2.167.4.5
             rsXx8000DvbTxGroups 1.3.6.1.4.1.2566.127.1.2.167.4.5.1
                 groupEvents 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.1
This group includes all OIDs for event handling.
                 groupTxCommon 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.2
Group for common transmitter objects
                 groupEventsTxCommon 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.3
This group includes all alarm OIDs that are common for all reserve concepts.
                 groupDualDrive 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.4
This group includes additional objects for reserve concepts DualDrive (NetCCU + 2 * exciter + outputstage) and Active/Passive Reserve (NetCCU + 2 * exciter + 2 * outputstage)
                 groupEventsDualDrive 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.5
This group includes additional events for reserve concepts DualDrive (NetCCU + 2 * exciter + outputstage) and Active/Passive Reserve (NetCCU + 2 * exciter + 2 * outputstage)
                 groupPowerReserve 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.6
This group includes additional objects for reserve concept Active/Passive Reserve (NetCCU + 2 * exciter + 2 * outputstage) For more details, refer to manual.
                 groupEventsPowerReserve 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.7
This group includes additional events for reserve concept Active/Passive Reserve (NetCCU + 2 * exciter + 2 * outputstage) For more details, refer to manual.
                 groupCommonMP 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.8
additional objects for medium/high power
                 groupEventsCommonMP 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.9
additional events for medium/high power
                 groupCommonNetCCU 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.10
additional objects for transmitters with NetCCU
                 groupEventsCommonNetCCU 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.11
additional events for transmitters with NetCCU
                 groupOstBLogbook 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.12
objects of logbook for output stage B
                 groupSumProbe 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.14
objects that are available only when sum probe exists
                 groupProductInfo 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.18
This group includes all OIDs for device product information.
                 groupAmpMeasureValues 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.19
This group includes all OIDs amplifier measure values. Practically, these information are not important to customers, they are needed in manufactory.
                 groupEventsAmplifier 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.20
events from the amplifier (medium/high power only)
                 groupRfProbes 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.21
This group includes all OIDs regarding RF Probes.
                 groupDummyLoadRF 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.22
This group includes all object types regarding probes from dummy load. The object types in this group are defined only when a dummy load measure point exists. This can occur in reserve concept active reserve only.
                 groupExcCommon 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.23
Group for common exciter objects
                 groupExcAdditionalSx800 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.24
Additional exciter objects for the Sx800
                 groupExcAdditionalSLx 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.25
Additional exciter objects for the SLx and the Sx801
                 groupEventsExciter 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.26
events from the exciter
                 groupExciterStatus 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.27
Group for exciterStatusTable.
                 groupExciterPrecorrection 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.28
Group for exciterPrecorrectionTable.
                 groupSLx 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.29
object types that are relevant for SLx devices only
                 groupObjectsACU 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.30
objects from ACU
                 groupIndependentRacks 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.31
object types that are relevant for NX variants with independent racks only
                 groupObjectsRE 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.32
object types for the re-equip kit
                 groupEventsControlExciter 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.34
additional events in case Sx801 is control exciter
                 groupEventsAdditionalPowerSupply 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.35
Events that are available only when additionalPowerSupply is true.
                 groupObjsAdditionalPowerSupply 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.36
Objects that are available only when additionalPowerSupply is true.
                 groupObjectsControlExciter 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.37
additional objects in case Sx801 is control exciter
                 groupObjectsSingleEnded 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.38
Group for objects in case of SingleTx or DualDrive.
                 groupObjectsSx801Amplifier 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.39
Objects for Sx801/SA801 amplifier status.
                 groupObsoleted 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.99
obsoleted or deprecated objects
                 groupEventsObsoleted 1.3.6.1.4.1.2566.127.1.2.167.4.5.1.100
obsoleted or deprecated events
             rsXx8000DvbTxCompl 1.3.6.1.4.1.2566.127.1.2.167.4.5.3
                 rsXx8000DVBSingleTxMP 1.3.6.1.4.1.2566.127.1.2.167.4.5.3.1
Reserve concept SingleTransmitter for Medium Power.
                 rsXx8000DVBDualDriveMP 1.3.6.1.4.1.2566.127.1.2.167.4.5.3.2
Reserve concept DualDrive for Medium Power.
                 rsXx8000DVBPowerReserveMP 1.3.6.1.4.1.2566.127.1.2.167.4.5.3.3
Reserve concept Active/Passive Reserve for Medium Power.
                 rsXx8000DVBSingleTxLP 1.3.6.1.4.1.2566.127.1.2.167.4.5.3.5
Reserve concept Low Power SingleTransmitter with NetCCU, meaning there is a NetCCU and a LowPower exciter with one or more (to the exciter) connected amplifiers.
                 rsXx8000DVBDualDriveLP 1.3.6.1.4.1.2566.127.1.2.167.4.5.3.6
Reserve concept DualDrive for Low Power.
                 rsXx8000DVBPowerReserveLP 1.3.6.1.4.1.2566.127.1.2.167.4.5.3.7
Reserve concept Active/Passive Reserve for Low Power.
                 rsXx8000DVBSingleTxLPNoNetCCU 1.3.6.1.4.1.2566.127.1.2.167.4.5.3.9
Reserve concept Low Power SingleTransmitter without NetCCU, meaning there is only a LowPower exciter with one or more (to the exciter) connected amplifiers.
                 rsXx8000DVBSLx 1.3.6.1.4.1.2566.127.1.2.167.4.5.3.10
SLx device
                 rsXx8000DVBExciterOnly 1.3.6.1.4.1.2566.127.1.2.167.4.5.3.11
DVB Exciter of 8000 series in a 7000 environment or Program Exciter in a Sx801 Backup Exciter environment.
                 rsXx8000DVBSx801ControlExciter 1.3.6.1.4.1.2566.127.1.2.167.4.5.3.12
Sx801 as control exciter
 rsXx8000DvbTxMibModule 1.3.6.1.4.1.2566.149.1.163.3
This MIB defines transmitting systems from Rohde & Schwarz. Use this MIB if your system meets the following requirements: - series XX8000 (NetCCU800), - DVB, - transmitter reserve concept SingleTx, DualDrive, Active Reserve or Passive Reserve. The following MIBs are related to this: - RS-COMMON-MIB - mandatory for this MIB - RS-XX8000-COMMON-MIB - mandatory for this MIB