RPHY-NDF-NDR-MIB: View SNMP OID List / Download MIB

VENDOR: CISCO


 Home MIB: RPHY-NDF-NDR-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, INET-ADDRESS-MIB, CISCO-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rphyNdfNdrMIB 1.3.6.1.4.1.9.9.857
description
         rphyNdfNdrMIBNotifs 1.3.6.1.4.1.9.9.857.0
             rphyNdfNdrMIBEventName 1.3.6.1.4.1.9.9.857.0.1
Test Notifiation Type
         rphyNdfNdrMIBObjects 1.3.6.1.4.1.9.9.857.1
             docsRphyRpdDevNdfCfgTable 1.3.6.1.4.1.9.9.857.1.1 no-access
This table provides OOB NDF channel's status and configuration information, for example channel frequency, width, poweradjust, admin status etc. This table also allows to enable or disable the NDF channel's admin status.
                 docsRphyRpdDevNdfCfgEntry 1.3.6.1.4.1.9.9.857.1.1.1 no-access
Each entry contains status and configuration information for a single NDF Channel.
                     docsRphyRpdDevNdfUniqueId 1.3.6.1.4.1.9.9.857.1.1.1.1 macaddress no-access
This key attribute specifies a globally unique 6-byte identifier for the RPD. By convention, an RPD SHOULD use the MAC address of the lowest numbered Ethernet port facing the CIN.
                     docsRphyRpdDevNdfRfPort 1.3.6.1.4.1.9.9.857.1.1.1.2 unsigned32 no-access
This key attribute reports the RPD RF port number carrying this NDF channel.
                     docsRphyRpdDevNdfRfChannel 1.3.6.1.4.1.9.9.857.1.1.1.3 unsigned32 no-access
This key attribute reports the NDF channel number.
                     docsRphyRpdDevNdfEnable 1.3.6.1.4.1.9.9.857.1.1.1.4 truthvalue read-write
This attribute indicates whether the NDF stream is enabled or disabled. Also, using this attribute NDF stream can be enabled or disabled.
                     docsRphyRpdDevNdfDstIPAddr 1.3.6.1.4.1.9.9.857.1.1.1.5 inetaddress read-only
This attribute reports the Group IP address of the RPD multicast NDF stream. When this filed is 0.0.0.0 or 0::0 (::) then the NDF stream is a unicast NDF stream.
                     docsRphyRpdDevNdfSrcIPAddr 1.3.6.1.4.1.9.9.857.1.1.1.6 inetaddress read-only
This attribute reports the IP address of the transmitter of the L2TP stream.
                     docsRphyRpdDevNdfSessionId 1.3.6.1.4.1.9.9.857.1.1.1.7 unsigned32 read-only
This attribute reports the L2TP session ID of the NDF stream.
                     docsRphyRpdDevNdfFrequency 1.3.6.1.4.1.9.9.857.1.1.1.8 unsigned32 read-only
This attribute reports the center frequency of the NDF channel.
                     docsRphyRpdDevNdfBandwidth 1.3.6.1.4.1.9.9.857.1.1.1.9 unsigned32 read-only
This attribute reports the bandwidth of the NDF channel. Channel widths supported for NDF are- Mode 0 : 80000Hz, Mode 1 : 160000Hz, Mode 2 : 320000Hz, Mode 3 : 640000Hz, Mode 4 : 1280000Hz, Mode 5 : 2560000Hz, Mode 6 : 5120000Hz, Mode 7 : 25600000Hz.
                     docsRphyRpdDevNdfPowerAdjust 1.3.6.1.4.1.9.9.857.1.1.1.10 integer32 read-only
This attribute specifies power level adjustment for the NDF channel relative to the base power level configured for the DS RF port.
                     docsRphyRpdDevNdfRfMute 1.3.6.1.4.1.9.9.857.1.1.1.11 truthvalue read-only
This attribute reports the current state of the RF output of the NDF channel. When Rf-mute is set to TRUE, the output RF signal is off. Similarly, when Rf-mute is set to FALSE, the output RF signal is active.
                     docsRphyRpdDevNdfIsUnicast 1.3.6.1.4.1.9.9.857.1.1.1.12 truthvalue read-only
This attribute indicates whether the NDF stream is unicast or multicast. When Group-IP filed is 0.0.0.0 or 0::0 (::) then the NDF stream is a unicast NDF stream.
                     docsRphyRpdDevNdfRpdStatus 1.3.6.1.4.1.9.9.857.1.1.1.13 octet string read-only
This attribute reports the string describing the current status of the RPD i.e 'Online' or 'Offline'. For config modify to take effect, the RPD status shoud be 'Online'.
                     docsRphyRpdDevNdfRpdInPktCount 1.3.6.1.4.1.9.9.857.1.1.1.14 counter64 read-only
This attribute reports the number of packets received by the RPD on a given NDF stream. RPD status should be 'Online' to get the actual input packets count.
                     docsRphyRpdDevNdfRpdOutPktCount 1.3.6.1.4.1.9.9.857.1.1.1.15 counter64 read-only
This attribute reports the number of packets transmitted by the RPD. RPD status should be 'Online' to get the actual output packets count.
             docsRphyRpdDevNdrCfgTable 1.3.6.1.4.1.9.9.857.1.2 no-access
This table provides OOB NDR channel's status and configuration information, for example channel frequency, width, poweradjust, admin status etc. This table also allows to enable or disable the NDR channel's admin status.
                 docsRphyRpdDevNdrCfgEntry 1.3.6.1.4.1.9.9.857.1.2.1 no-access
Each entry contains status and configuration information for a single NDR Channel.
                     docsRphyRpdDevNdrUniqueId 1.3.6.1.4.1.9.9.857.1.2.1.1 macaddress no-access
This key attribute specifies a globally unique 6-byte identifier for the RPD. By convention, an RPD SHOULD use the MAC address of the lowest numbered Ethernet port facing the CIN.
                     docsRphyRpdDevNdrRfPort 1.3.6.1.4.1.9.9.857.1.2.1.2 unsigned32 no-access
This key attribute reports the RPD RF port number
                     docsRphyRpdDevNdrRfChannel 1.3.6.1.4.1.9.9.857.1.2.1.3 unsigned32 no-access
This key attribute reports the NDR channel number.
                     docsRphyRpdDevNdrEnable 1.3.6.1.4.1.9.9.857.1.2.1.4 truthvalue read-write
This attribute indicates whether the NDR stream is enabled or disabled. Also, using this attribute NDR stream can be enabled or disabled.
                     docsRphyRpdDevNdrDstIPAddr 1.3.6.1.4.1.9.9.857.1.2.1.5 inetaddress read-only
This attribute reports the IP address of the receiver of the NDR L2TP stream.
                     docsRphyRpdDevNdrSrcIPAddr 1.3.6.1.4.1.9.9.857.1.2.1.6 inetaddress read-only
This attribute reports the IP address of the RPD transmitting the L2TP stream.
                     docsRphyRpdDevNdrSessionId 1.3.6.1.4.1.9.9.857.1.2.1.7 unsigned32 read-only
This attribute reports the L2TP session ID of the NDR stream.
                     docsRphyRpdDevNdrFrequency 1.3.6.1.4.1.9.9.857.1.2.1.8 unsigned32 read-only
This attribute reports the center frequency of the NDR channel.
                     docsRphyRpdDevNdrBandwidth 1.3.6.1.4.1.9.9.857.1.2.1.9 unsigned32 read-only
This attribute reports the bandwidth of the NDR channel.Channel widths supported for NDR are- Mode 0 : 80000Hz, Mode 1 : 160000Hz, Mode 2 : 320000Hz, Mode 3 : 640000Hz, Mode 4 : 1280000Hz, Mode 5 : 2560000Hz, Mode 6 : 5120000Hz.
                     docsRphyRpdDevNdrMtuSize 1.3.6.1.4.1.9.9.857.1.2.1.10 unsigned32 read-only
This attribute reports the Maximum Transmission Unit or maximum packet size for the L2TP stream.
                     docsRphyRpdDevNdrPhb 1.3.6.1.4.1.9.9.857.1.2.1.11 unsigned32 read-only
This attribute reports the DSCP QOS value configured for a L2TP packets. Default PHB is 0x0 means Best-Effort packet delivery.
                     docsRphyRpdDevNdrPowerAdjust 1.3.6.1.4.1.9.9.857.1.2.1.12 integer32 read-only
This attribute represents the desired target receive power level adjust for the selected NDR channel from the base target power reference level specified for the corresponding US RF port. The value represents power spectral density and is specified in units of TenthdB per 1.6 MHz of equivalent RF spectrum. The channel’s target receive power is computed by adding the value of this attribute to the value of base target power reference level for the corresponding RF port. This object specifies the commanded input power level for the NDR channel as specified in [R-OOB].
                     docsRphyRpdDevNdrRpdStatus 1.3.6.1.4.1.9.9.857.1.2.1.13 octet string read-only
This attribute reports the string describing the current status of the RPD i.e 'Online' or 'Offline'. For config modify to take effect, the RPD status shoud be 'Online'.
                     docsRphyRpdDevNdrRpdInPktCount 1.3.6.1.4.1.9.9.857.1.2.1.14 counter64 read-only
This attribute reports the number of packets received by the RPD on a given NDR stream. RPD status should be 'Online' to get the actual input packets count.
                     docsRphyRpdDevNdrRpdOutPktCount 1.3.6.1.4.1.9.9.857.1.2.1.15 counter64 read-only
This attribute reports the number of packets transmitted by the RPD. RPD status should be 'Online' to get the actual output packets count.
         rphyNdfNdrMIBConform 1.3.6.1.4.1.9.9.857.2
             rphyNdfNdrMIBCompliances 1.3.6.1.4.1.9.9.857.2.1
                 rphyNdfNdrMIBCompliance 1.3.6.1.4.1.9.9.857.2.1.1
This is a default module-compliance containing default object groups.
             rphyNdfNdrMIBGroups 1.3.6.1.4.1.9.9.857.2.2
                 rphyNdfNdrMIBMainObjectGroup 1.3.6.1.4.1.9.9.857.2.2.1
The is a test group.
                 rphyNdfNdrMIBNotificationGroup 1.3.6.1.4.1.9.9.857.2.2.2
The is a test group.