ROUTING6-MIB: View SNMP OID List / Download MIB

VENDOR: QUANTA COMPUTER INC.


 Home MIB: ROUTING6-MIB
Download as:   
SNMPv2-CONF, OSPFV3-MIB, OSPF-MIB, SNMPv2-SMI, QUANTA-SWITCH-MIB, SNMPv2-TC, IPV6-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 routingIpv6 1.3.6.1.4.1.7244.2.30
The Quanta Private MIB for FastPath Ipv6 Routing
       agentIpv6Group 1.3.6.1.4.1.7244.2.30.1
           agentIpv6RoutingMode 1.3.6.1.4.1.7244.2.30.1.1 integer read-write
Administratively enables/disables ipv6 unicast routing on the switch. Enumeration: 'enable': 1, 'disable': 2.
           agentIpv6InterfaceTable 1.3.6.1.4.1.7244.2.30.1.2 no-access
               agentIpv6InterfaceEntry 1.3.6.1.4.1.7244.2.30.1.2.1 no-access
                   agentIpv6InterfaceIfIndex 1.3.6.1.4.1.7244.2.30.1.2.1.1 integer32 read-only
The IfIndex associated with this instance.
                   agentIpv6InterfaceMtuValue 1.3.6.1.4.1.7244.2.30.1.2.1.2 unsigned32 read-write
Configures the MTU value for this interface.If it is not yet configured, retrieving the value of this object results in a zero value. Setting the value zero to this object effectively un-configures the MTU.
                   agentIpv6InterfaceDadTransmits 1.3.6.1.4.1.7244.2.30.1.2.1.3 integer32 read-write
Configures the dad transmits value for this interface.
                   agentIpv6InterfaceLinkLocalOnly 1.3.6.1.4.1.7244.2.30.1.2.1.4 integer read-write
When enabled, interface is capable of ipv6 operation without a global address. In this case, an eui-64 based link-local address is used. Enumeration: 'enable': 1, 'disable': 2.
                   agentIpv6InterfaceIcmpUnreachables 1.3.6.1.4.1.7244.2.30.1.2.1.5 integer read-write
If this object is enable, it indicates that ICMPv6 unreachables can be sent on this interface. Enumeration: 'enable': 1, 'disable': 2.
                   agentIpv6InterfaceAutoconfig 1.3.6.1.4.1.7244.2.30.1.2.1.6 integer read-write
If this object is enabled, it indicates that the IPv6 address is automatically generated using IPv6 stateless address auto configuration. Enumeration: 'enable': 1, 'disable': 2.
                   agentIpv6InterfaceDhcpClient 1.3.6.1.4.1.7244.2.30.1.2.1.7 integer read-write
If this object is enabled, the interface uses DHCPv6 Client protocol to acquire an IPv6 address. Enumeration: 'enable': 1, 'disable': 2.
           agentIpv6RouterAdvertisementTable 1.3.6.1.4.1.7244.2.30.1.3 no-access
There is no global administrative flag for router advertisement. The global routing flag (agentIpv6RoutingMode) will be used for this purpose. If routing is disabled, router advertisement is disabled as well.
               agentIpv6RouterAdvertisementEntry 1.3.6.1.4.1.7244.2.30.1.3.1 no-access
                   agentIpv6RouterAdvertisementIfIndex 1.3.6.1.4.1.7244.2.30.1.3.1.1 integer32 read-only
Interface Number to configure Router Advertisement on.
                   agentIpv6RouterAdvertisementSuppressMode 1.3.6.1.4.1.7244.2.30.1.3.1.2 integer read-write
Enable or disable router advertisement suppression on the interface. Enumeration: 'enable': 1, 'disable': 2.
                   agentIpv6RouterAdvertisementMaxAdvertisementInterval 1.3.6.1.4.1.7244.2.30.1.3.1.3 integer32 read-write
Maximum time allowed between sending router advertisements from the interface. (Max * 0.75 >= Min)
                   agentIpv6RouterAdvertisementMinAdvertisementInterval 1.3.6.1.4.1.7244.2.30.1.3.1.4 integer32 read-write
Mimimum time allowed between sending router advertisements from the interface. (Max * 0.75 >= Min)
                   agentIpv6RouterAdvertisementAdvertisementLifetime 1.3.6.1.4.1.7244.2.30.1.3.1.5 integer32 read-write
Value of lifetime field of router advertisement sent from the interface. This value must be greater than or equal to agentIpv6RouterAdvertisementMaxAdvertisementInterval.
                   agentIpv6RouterAdvertisementNbrSolicitInterval 1.3.6.1.4.1.7244.2.30.1.3.1.6 unsigned32 read-write
Value of retrans time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval. The valid value range is 1000..4294967295
                   agentIpv6RouterAdvertisementReachableTime 1.3.6.1.4.1.7244.2.30.1.3.1.7 integer32 read-write
Value of reachable time field of router advertisement sent from the interface. A value of 0 means this router does not specifiy the interval.
                   agentIpv6RouterAdvertisementManagedFlag 1.3.6.1.4.1.7244.2.30.1.3.1.8 integer read-write
Value of managed config field of router advertisement sent from the interface. Enumeration: 'enable': 1, 'disable': 2.
                   agentIpv6RouterAdvertisementOtherFlag 1.3.6.1.4.1.7244.2.30.1.3.1.9 integer read-write
Value of other config field of router advertisement sent from the interface. Enumeration: 'enable': 1, 'disable': 2.
           agentIpv6AddrPrefixTable 1.3.6.1.4.1.7244.2.30.1.4 no-access
The list of IPv6 address prefixes of IPv6 interfaces.
               agentIpv6AddrPrefixEntry 1.3.6.1.4.1.7244.2.30.1.4.1 no-access
An interface entry containing objects of a particular IPv6 address prefix.
                   agentIpv6AddrPrefix 1.3.6.1.4.1.7244.2.30.1.4.1.1 ipv6addressprefix no-access
The prefix associated with the this interface.
                   agentIpv6AddrPrefixLength 1.3.6.1.4.1.7244.2.30.1.4.1.2 integer no-access
The length of the prefix (in bits).
                   agentIpv6AddrPrefixOnLinkFlag 1.3.6.1.4.1.7244.2.30.1.4.1.3 truthvalue read-write
This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise.
                   agentIpv6AddrPrefixAutonomousFlag 1.3.6.1.4.1.7244.2.30.1.4.1.4 truthvalue read-write
Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a local interface address). If false(2), it is not used to autoconfigure a local interface address.
                   agentIpv6AddrPrefixAdvPreferredLifetime 1.3.6.1.4.1.7244.2.30.1.4.1.5 unsigned32 read-write
It is the length of time in seconds that this prefix will remain preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected.
                   agentIpv6AddrPrefixAdvValidLifetime 1.3.6.1.4.1.7244.2.30.1.4.1.6 unsigned32 read-write
It is the length of time in seconds that this prefix will remain valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should not appear as the destination or source address of a packet.
           agentIpv6AddrTable 1.3.6.1.4.1.7244.2.30.1.5 no-access
The table of addressing information relevant to this node's interface addresses.
               agentIpv6AddrEntry 1.3.6.1.4.1.7244.2.30.1.5.1 no-access
The addressing information for one of this node's interface addresses.
                   agentIpv6AddrAddress 1.3.6.1.4.1.7244.2.30.1.5.1.1 ipv6address no-access
The IPv6 address to which this entry's addressing information pertains.
                   agentIpv6AddrPfxLength 1.3.6.1.4.1.7244.2.30.1.5.1.2 integer read-only
The length of the prefix (in bits) associated with the IPv6 address of this entry.
                   agentIpv6AddrEui64Flag 1.3.6.1.4.1.7244.2.30.1.5.1.3 truthvalue read-only
This object has the value 'true(1)', if this address uses and eui-64 generated interface identifier and the value 'false(2)' otherwise.
                   agentIpv6AddrStatus 1.3.6.1.4.1.7244.2.30.1.5.1.4 rowstatus read-only
Creates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given interface. The agentIpv6NetMask object must be set during creation. destroy(6) - Removes the associated address from the interface.
           agentIpv6StaticRouteTable 1.3.6.1.4.1.7244.2.30.1.6 no-access
IPv6 Static Routing table. This table contains an entry for each valid IPv6 static unicast route that can be used for packet forwarding determination.
               agentIpv6StaticRouteEntry 1.3.6.1.4.1.7244.2.30.1.6.1 no-access
A routing entry.
                   agentIpv6StaticRouteDest 1.3.6.1.4.1.7244.2.30.1.6.1.1 ipv6addressprefix no-access
The destination IPv6 address of this route. This object may not take a Multicast address value.
                   agentIpv6StaticRoutePfxLength 1.3.6.1.4.1.7244.2.30.1.6.1.2 integer no-access
Indicates the prefix length of the destination address.
                   agentIpv6StaticRouteIfIndex 1.3.6.1.4.1.7244.2.30.1.6.1.3 ipv6ifindexorzero no-access
The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ipv6IfIndex. For routes with global address next hop this value can be zero.
                   agentIpv6StaticRouteNextHop 1.3.6.1.4.1.7244.2.30.1.6.1.4 ipv6address no-access
The address of the next system en route.
                   agentIpv6StaticRoutePreference 1.3.6.1.4.1.7244.2.30.1.6.1.5 integer read-only
The routing preference metric for this route. A lower value is more preferred.
                   agentIpv6StaticRouteStatus 1.3.6.1.4.1.7244.2.30.1.6.1.6 rowstatus read-only
Creates a new entry in the Address table. Allowed values are: createAndGo(4) - Creates an entry in this table. destroy(6) - Removes the associated route from the interface.
           agentIpv6ServicePortGroup 1.3.6.1.4.1.7244.2.30.1.7
               agentIpv6ServicePortPrefixTable 1.3.6.1.4.1.7244.2.30.1.7.1 no-access
IPv6 Service Port Prefix Table. This table contains an entry for each valid IPv6 prefix configured on the Service Port.
                   agentIpv6ServicePortPrefixEntry 1.3.6.1.4.1.7244.2.30.1.7.1.1 no-access
An IPv6 Service Port Prefix entry.
                       agentIpv6ServicePortPrefixIndex 1.3.6.1.4.1.7244.2.30.1.7.1.1.1 unsigned32 no-access
The index of the Ipv6 Prefix Address configured on the Service Port. Removal of a row will cause index values to be reassigned.
                       agentIpv6ServicePortPrefix 1.3.6.1.4.1.7244.2.30.1.7.1.1.2 ipv6address read-only
The Ipv6 Prefix Address configured on the Service Port.
                       agentIpv6ServicePortPrefixLength 1.3.6.1.4.1.7244.2.30.1.7.1.1.3 unsigned32 read-only
The length of the IPv6 Prefix Address.
               agentIpv6ServicePortDefaultRouterTable 1.3.6.1.4.1.7244.2.30.1.7.2 no-access
IPv6 Service Port Default Router Table. This table contains an entry for each valid IPv6 Default Router configured on the Service Port.
                   agentIpv6ServicePortDefaultRouterEntry 1.3.6.1.4.1.7244.2.30.1.7.2.1 no-access
An IPv6 Service Port Default Router entry.
                       agentIpv6ServicePortDefaultRouterIndex 1.3.6.1.4.1.7244.2.30.1.7.2.1.1 unsigned32 no-access
The index of the IPv6 Default Router Address configured on the Service Port. Removal of a row will cause index values to be reassigned.
                       agentIpv6ServicePortDefaultRouter 1.3.6.1.4.1.7244.2.30.1.7.2.1.2 ipv6address read-only
The Address of the IPv6 Default Router configured on the Service Port.
               agentIpv6ServicePortNbrTable 1.3.6.1.4.1.7244.2.30.1.7.3 no-access
IPv6 Service Port Neighbor Table. This table contains an entry for each valid IPv6 Neighbor configured on the Service Port.
                   agentIpv6ServicePortNbrEntry 1.3.6.1.4.1.7244.2.30.1.7.3.1 no-access
An IPv6 Service Port Neighbor entry.
                       agentIpv6ServicePortNbrAddr 1.3.6.1.4.1.7244.2.30.1.7.3.1.1 ipv6address no-access
The Ipv6 Address of a neighbor switch visible to the Service Port.
                       agentIpv6ServicePortNbrPhysAddr 1.3.6.1.4.1.7244.2.30.1.7.3.1.2 macaddress read-only
The MacAddress of the neighboring switch.
                       agentIpv6ServicePortNbrState 1.3.6.1.4.1.7244.2.30.1.7.3.1.3 integer read-only
The state of the neighboring switch: reachable(1) - The neighbor is reachable by this switch. stale(2) - Information about the neighbor is scheduled for deletion. delay(3) - No information has been received from neighbor during delay period. probe(4) - Switch is attempting to probe for this neighbor. unknown(6) - Unknown status. Enumeration: 'delay': 3, 'unknown': 6, 'stale': 2, 'probe': 4, 'reachable': 1.
                       agentIpv6ServicePortNbrUpdated 1.3.6.1.4.1.7244.2.30.1.7.3.1.4 timestamp read-only
The last sysUpTime that this neighbor has been updated.
                       agentIpv6ServicePortNbrIsRouter 1.3.6.1.4.1.7244.2.30.1.7.3.1.5 truthvalue read-only
Returns true(1) if the neighbor machine is a router, false(2) otherwise.
               agentIpv6ServicePortConfigProtocol 1.3.6.1.4.1.7244.2.30.1.7.4 integer read-write
The switch's ServicePort IPv6 config protocol Enumeration: 'none': 1, 'dhcp6': 2.
               agentIpv6ServicePortDhcpRestart 1.3.6.1.4.1.7244.2.30.1.7.5 truthvalue read-write
The switch's ServicePort IPv6 DHCP Restart
           agentIpv6NeighborGroup 1.3.6.1.4.1.7244.2.30.1.9
               agentIpv6NeighborTable 1.3.6.1.4.1.7244.2.30.1.9.1 no-access
IPv6 Neighbor Table. This table contains an entry for each valid IPv6 Neighbor configured
                   agentIpv6NeighborEntry 1.3.6.1.4.1.7244.2.30.1.9.1.1 no-access
An IPv6 Neighbor entry.
                       agentIpv6NeighborIfIndex 1.3.6.1.4.1.7244.2.30.1.9.1.1.1 ipv6ifindex read-only
A unique non-zero value identifying the particular IPv6 interface.
                       agentIpv6NeighborAddress 1.3.6.1.4.1.7244.2.30.1.9.1.1.2 ipv6address read-only
The Ipv6 Address of a neighbor switch visible
                       agentIpv6NeighborMacAddress 1.3.6.1.4.1.7244.2.30.1.9.1.1.3 physaddress read-only
The MacAddress of the neighboring switch.
                       agentIpv6NeighborIsRouter 1.3.6.1.4.1.7244.2.30.1.9.1.1.4 truthvalue read-only
Returns true(1) if the neighbor machine is a router, false(2) otherwise.
                       agentIpv6NeighborState 1.3.6.1.4.1.7244.2.30.1.9.1.1.5 integer read-only
The state of the neighboring switch: reachable(1) - The neighbor is reachable by this switch. stale(2) - Information about the neighbor is scheduled for deletion. delay(3) - No information has been received from neighbor during delay period. probe(4) - Switch is attempting to probe for this neighbor. unknown(6) - Unknown status. Enumeration: 'unknown': 6, 'probe': 4, 'invalid': 5, 'delay': 3, 'reachable': 1, 'stale': 2.
                       agentIpv6NeighborLastUpdated 1.3.6.1.4.1.7244.2.30.1.9.1.1.6 timestamp read-only
The last sysUpTime that this neighbor has been updated.
               agentIpv6StaticNeighbor 1.3.6.1.4.1.7244.2.30.1.9.2 no-access
IPv6 static Neighbor Table. This table contains an entry for each valid IPv6 static Neighbor configured
                   agentIpv6StaticNeighborEntry 1.3.6.1.4.1.7244.2.30.1.9.2.1 no-access
An IPv6 static Neighbor entry.
                       agentIpv6StaticNeighborIfIndex 1.3.6.1.4.1.7244.2.30.1.9.2.1.1 ipv6ifindex no-access
A unique non-zero value identifying the particular IPv6 interface.
                       agentIpv6StaticNeighborAddress 1.3.6.1.4.1.7244.2.30.1.9.2.1.2 ipv6address read-only
The Ipv6 Address of a static neighbor switch visible
                       agentIpv6StaticNeighborMacAddress 1.3.6.1.4.1.7244.2.30.1.9.2.1.3 physaddress read-only
The MacAddress of the static neighboring switch.
               agentIpv6StaticNeighborRowAddress 1.3.6.1.4.1.7244.2.30.1.9.3 octet string read-write
The Ipv6 Address of a static neighbor switch visible
               agentIpv6StaticNeighborRowMacAddress 1.3.6.1.4.1.7244.2.30.1.9.4 physaddress read-write
The MacAddress of the static neighboring switch.
               agentIpv6StaticNeighborRowStatus 1.3.6.1.4.1.7244.2.30.1.9.5 rowstatus read-write
Creates a new entry in the Neighbor table. Allowed values are: createAndGo(4) - Creates an entry in this table. destroy(6) - Removes the associated address from the interface.
           agentIpv6IcmpControlGroup 1.3.6.1.4.1.7244.2.30.1.10
                 agentIpv6IcmpRateLimitInterval 1.3.6.1.4.1.7244.2.30.1.10.1 integer32 read-write
Specifies the time interval between tokens being placed in the bucket for ICMP Ratelimit.
                 agentIpv6IcmpRateLimitBurstSize 1.3.6.1.4.1.7244.2.30.1.10.2 integer32 read-write
Specifies the number of tokens to be placed after timeout.
           agentDhcp6ClientParametersTable 1.3.6.1.4.1.7244.2.30.1.11 no-access
Information about the DHCPv6 Client parameters on the interfaces.
                 agentDhcp6ClientParametersEntry 1.3.6.1.4.1.7244.2.30.1.11.1 no-access
DHCPv6 Client information on an interface.
                     agentDhcp6ClientInterfaceIndex 1.3.6.1.4.1.7244.2.30.1.11.1.1 unsigned32 read-only
The Interface index on which the IPv6 address is leased by the DHCPv6 Server.
                     agentDhcp6ClientPrefix 1.3.6.1.4.1.7244.2.30.1.11.1.2 ipv6addressprefix read-only
The IPv6 Prefix leased by the DHCPv6 Server.
                     agentDhcp6ClientPrefixlength 1.3.6.1.4.1.7244.2.30.1.11.1.3 integer read-only
The Prefix length corresponding to the IPv6 Prefix leased by the DHCPv6 Server.
                     agentDhcp6ClientState 1.3.6.1.4.1.7244.2.30.1.11.1.4 integer read-only
The State of the DHCPv6 Client on this interface. Enumeration: 'request': 2, 'rebind': 5, 'release': 6, 'renew': 4, 'inactive': 0, 'solicit': 1, 'active': 3.
                     agentDhcp6ClientServerDUID 1.3.6.1.4.1.7244.2.30.1.11.1.5 displaystring read-only
The DHCPv6 Unique Identifier of the DHCPv6 Server on this interface.
                     agentDhcp6ClientT1Time 1.3.6.1.4.1.7244.2.30.1.11.1.6 unsigned32 read-only
The T1 (in seconds) time as indicated by the DHCPv6 Server. T1 value indicates the time interval after which the address is requested for renewal.
                     agentDhcp6ClientT2Time 1.3.6.1.4.1.7244.2.30.1.11.1.7 unsigned32 read-only
The T2 (in seconds) time as indicated by the DHCPv6 Server. T2 value indicates the time interval after which the Client sends Rebind message to the Server incase there are no replies to the Renew messages.
                     agentDhcp6ClientIAID 1.3.6.1.4.1.7244.2.30.1.11.1.8 unsigned32 read-only
An identifier for an identity association chosen by this Client.
                     agentDhcp6ClientPreferredLifeTime 1.3.6.1.4.1.7244.2.30.1.11.1.9 unsigned32 read-only
The time (in seconds) that the IPv6 address is leased by the DHCPv6 Server.
                     agentDhcp6ClientValidLifeTime 1.3.6.1.4.1.7244.2.30.1.11.1.10 unsigned32 read-only
The time (in seconds) that the IPv6 address is leased by the DHCPv6 Server.
                     agentDhcp6ClientRenewTime 1.3.6.1.4.1.7244.2.30.1.11.1.11 unsigned32 read-only
The time (in seconds) remaining to send a DHCPv6 Renew request to DHCPv6 Server for the leased address.
                     agentDhcp6ClientExpireTime 1.3.6.1.4.1.7244.2.30.1.11.1.12 unsigned32 read-only
The time (in seconds) when the DHCPv6 leased address expires.
       agentRouterRipngConfigGroup 1.3.6.1.4.1.7244.2.30.2
           agentRouterRipngAdminState 1.3.6.1.4.1.7244.2.30.2.1 integer read-write
Sets the administrative mode of RIPng in the router. Enumeration: 'enable': 1, 'disable': 2.
           agentRouterRipngSplitHorizonMode 1.3.6.1.4.1.7244.2.30.2.2 integer read-write
Sets the RIPng split horizon operating mode in the router. A value of none(1) means split horizon processing is disabled. When set to simple(2), the simple split horizon technique is used. When set to poisonReverse(3), the split horizon with poison reverse technique is used. The default split horizon mode is simple(2). Enumeration: 'simple': 2, 'none': 1, 'poisonReverse': 3.
           agentRouterRipngDefaultMetric 1.3.6.1.4.1.7244.2.30.2.5 integer32 read-write
Default metric of redistributed routes, when RIPng redistributes from other protocols. {0} indicates that the parameter is not configured, this value should not be set. Valid range for set is (1..15).
           agentRouterRipngDefaultMetricConfigured 1.3.6.1.4.1.7244.2.30.2.6 truthvalue read-write
Flag to determine whether RIPng default-metric is configured or not. Set to 'false' to unconfigure the default route metric. Set to 'true' is not allowed.
           agentRouterRipngDefaultInfoOriginate 1.3.6.1.4.1.7244.2.30.2.7 truthvalue read-write
Flag to determine, whether RIPng can advertise a default-route learned from another protocol.
           agentRouterRipngDistance 1.3.6.1.4.1.7244.2.30.2.8 integer32 read-write
Configure the distance value for RIPng routes.
           agentRipngRouteRedistTable 1.3.6.1.4.1.7244.2.30.2.9 no-access
This table contains the MIB objects required to configure route-redistribution for RIPng. Here, RIPng is the Destination protocol and the source protocols can be any of : BGP, OSPF, Static, Connected.
               agentRipngRouteRedistEntry 1.3.6.1.4.1.7244.2.30.2.9.1 no-access
                   agentRipngRouteRedistSource 1.3.6.1.4.1.7244.2.30.2.9.1.1 integer read-only
Source route, from which RIPng can redistribute routes. This object also acts as the identifier for the RIP redistribution Table entry. Enumeration: 'static': 2, 'connected': 1, 'ospf': 3.
                   agentRipngRouteRedistMode 1.3.6.1.4.1.7244.2.30.2.9.1.2 integer read-write
User enabels/disables route-redistribution for a particular source protocol. Enumeration: 'enable': 1, 'disable': 2.
                   agentRipngRouteRedistMetric 1.3.6.1.4.1.7244.2.30.2.9.1.3 integer32 read-write
Metric used for redistributing a particular source protocol route into RIPng. {0} indicates that the parameter is not configured, this value should not be set. Valid range for set is (1..15).
                   agentRipngRouteRedistMetricConfigured 1.3.6.1.4.1.7244.2.30.2.9.1.4 truthvalue read-write
Flag to determine whether RIPng redistribute-metric is configured or not. Set to 'false' to unconfigure redistribute metric. Set to 'true' is not allowed.
           agentRouterRipngUpdateTime 1.3.6.1.4.1.7244.2.30.2.10 integer32 read-write
Configure the Ripng update time.
           agentRouterRipngGarbageTime 1.3.6.1.4.1.7244.2.30.2.11 integer32 read-write
Configure the Ripng garbage time.
           agentRouterRipngTimeoutTime 1.3.6.1.4.1.7244.2.30.2.12 integer32 read-write
Configure the Ripng timeout time.
           agentRipngIfTable 1.3.6.1.4.1.7244.2.30.2.13 no-access
The Ripng Interface Table describes the inter- faces from the viewpoint of Ripng.
                 agentRipngIfEntry 1.3.6.1.4.1.7244.2.30.2.13.1 no-access
The Ripng Interface Entry describes one inter- face from the viewpoint of Ripng.
                     agentRipngIfIndex 1.3.6.1.4.1.7244.2.30.2.13.1.1 integer32 read-only
The IfIndex associated with this instance.
                     agentRipngIfAdminMode 1.3.6.1.4.1.7244.2.30.2.13.1.2 integer read-write
Configures interface mode of Ripng. Enumeration: 'enable': 1, 'disable': 2.
                     agentRipngIfPassiveMode 1.3.6.1.4.1.7244.2.30.2.13.1.3 integer read-write
Flag to determine whether the interface is passive. A passive interface will not participate in the Ripng adjacency formation. Enumeration: 'enable': 1, 'disable': 2.
       agentRouterOspfv3ConfigGroup 1.3.6.1.4.1.7244.2.30.3
           agentOspfv3DefaultMetric 1.3.6.1.4.1.7244.2.30.3.1 integer32 read-write
Default metric of redistributed routes, when OSPFv3 redistributes from other protocols.
           agentOspfv3DefaultMetricConfigured 1.3.6.1.4.1.7244.2.30.3.2 truthvalue read-write
Flag to determine whether OSPFv3 default-metric is configured or not.
           agentOspfv3DefaultInfoOriginate 1.3.6.1.4.1.7244.2.30.3.3 truthvalue read-write
Flag to determine, whether OSPFv3 can advertise a default-route learned from another protocol.
           agentOspfv3DefaultInfoOriginateAlways 1.3.6.1.4.1.7244.2.30.3.4 truthvalue read-write
When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always. Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the router's forwarding table contains a default route.
           agentOspfv3DefaultInfoOriginateMetric 1.3.6.1.4.1.7244.2.30.3.5 integer32 read-write
Metric of the default route,which OSPF advertises when learned from other protocol.
           agentOspfv3DefaultInfoOriginateMetricConfigured 1.3.6.1.4.1.7244.2.30.3.6 truthvalue read-write
Flag to determine whether OSPF default-info originate metric is configured or not.
           agentOspfv3DefaultInfoOriginateMetricType 1.3.6.1.4.1.7244.2.30.3.7 integer read-write
Metric Type of the default route,which OSPF advertises when learned from other protocol. It can be 1(external type 1) or 2(external type 2). Enumeration: 'externalType2': 2, 'externalType1': 1.
           agentOspfv3RouteRedistTable 1.3.6.1.4.1.7244.2.30.3.8 no-access
This table contains the MIB objects required to configure route-redistribution for OSPF. Here, OSPF is the Destination protocol and the source protocols can be any of : BGP, RIP, Static, Connected.
               agentOspfv3RouteRedistEntry 1.3.6.1.4.1.7244.2.30.3.8.1 no-access
                   agentOspfv3RouteRedistSource 1.3.6.1.4.1.7244.2.30.3.8.1.1 integer read-only
Source protocol, from which OSPF can redistribute routes. This object also acts as the identifier for the OSPF redistribution Table entry. Enumeration: 'static': 2, 'connected': 1.
                   agentOspfv3RouteRedistMode 1.3.6.1.4.1.7244.2.30.3.8.1.2 integer read-write
User enabels/disables route-redistribution for a particular source protocol. Enumeration: 'enable': 1, 'disable': 2.
                   agentOspfv3RouteRedistMetric 1.3.6.1.4.1.7244.2.30.3.8.1.3 integer32 read-write
Metric used for redistributing a particular source protocol route into OSPF.
                   agentOspfv3RouteRedistMetricConfigured 1.3.6.1.4.1.7244.2.30.3.8.1.4 truthvalue read-write
Flag to determine whether OSPF redistribute-metric is configured or not.
                   agentOspfv3RouteRedistMetricType 1.3.6.1.4.1.7244.2.30.3.8.1.5 integer read-write
Metric Type of routes,which OSPF redistributes from other source protocols. It can be 1(external type 1) or 2(external type 2). Enumeration: 'externalType2': 2, 'externalType1': 1.
                   agentOspfv3RouteRedistTag 1.3.6.1.4.1.7244.2.30.3.8.1.6 unsigned32 read-write
It specifies the tag field in routes redistributed by OSPF.
           agentOspfv3IfTable 1.3.6.1.4.1.7244.2.30.3.9 no-access
The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. Augments ospfIfTable from the OSPF-MIB.
               agentOspfv3IfEntry 1.3.6.1.4.1.7244.2.30.3.9.1 no-access
The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. Augments ospfIfEntry in OSPF-MIB.
                   agentOspfv3IfIpMtuIgnoreFlag 1.3.6.1.4.1.7244.2.30.3.9.1.2 integer read-write
Configures the IP MTU Ignore Flag value for this OSPF interface. Enumeration: 'enable': 1, 'disable': 2.
                   agentOspfv3IfPassiveMode 1.3.6.1.4.1.7244.2.30.3.9.1.3 truthvalue read-write
Flag to determine whether the interface is passive. A passive interface will not participate in the OSPF adjacency formation.
           agentOspfv3LsdbTable 1.3.6.1.4.1.7244.2.30.3.10 no-access
The OSPF Process's Link State Database.
                 agentOspfv3LsdbEntry 1.3.6.1.4.1.7244.2.30.3.10.1 no-access
A single Link State Advertisement.
                     agentOspfv3LsdbAreaId 1.3.6.1.4.1.7244.2.30.3.10.1.1 areaid read-only
The 32 bit identifier of the Area from which the LSA was received.
                     agentOspfv3LsdbType 1.3.6.1.4.1.7244.2.30.3.10.1.2 integer read-only
The type of the link state advertisement. Each link state type has a separate advertise- ment format. Enumeration: 'routerLink': 1, 'interRouter': 4, 'intraPrefix': 9, 'interNetwork': 3, 'multicastGroup': 6, 'asExternal': 5, 'illegalLSA': 0, 'networkLink': 2, 'link': 8, 'nssaExternal': 7, 'unknownLink': 10, 'unknownArea': 11.
                     agentOspfv3LsdbLsid 1.3.6.1.4.1.7244.2.30.3.10.1.3 ipaddress read-only
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
                     agentOspfv3LsdbRouterId 1.3.6.1.4.1.7244.2.30.3.10.1.4 routerid read-only
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
                     agentOspfv3LsdbSequence 1.3.6.1.4.1.7244.2.30.3.10.1.5 unsigned32 read-only
The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
                     agentOspfv3LsdbAge 1.3.6.1.4.1.7244.2.30.3.10.1.6 integer32 read-only
This field is the age of the link state adver- tisement in seconds.
                     agentOspfv3LsdbChecksum 1.3.6.1.4.1.7244.2.30.3.10.1.7 unsigned32 read-only
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
                     agentOspfv3LsdbAdvertisement 1.3.6.1.4.1.7244.2.30.3.10.1.8 displaystring read-only
The entire Link State Advertisement, including its header.
           agentOspfv3AutoCostRefBw 1.3.6.1.4.1.7244.2.30.3.14 autocostrefbw read-write
Auto cost refernece bandwidth of the router interafaces for ospf metric calculations. It can be an integer from 1 to 4294967. The default reference bandwidth is 100 Mbps.
           agentOspfv3AsLsdbTable 1.3.6.1.4.1.7244.2.30.3.18 no-access
The OSPF Process's AS-scope LSA Link State Database. The Database contains the AS-scope Link State Advertisements from throughout the areas that the device is attached to. This table is identical to the OSPF LSDB Table in format, but contains only AS-scope Link State Advertisements. The purpose is to allow AS-scope LSAs to be displayed once for the router rather than once in each non-stub area.
                 agentOspfv3AsLsdbEntry 1.3.6.1.4.1.7244.2.30.3.18.1 no-access
A single Link State Advertisement.
                     agentOspfv3AsLsdbType 1.3.6.1.4.1.7244.2.30.3.18.1.1 integer read-only
The type of the link state advertisement. Each link state type has a separate advertise- ment format. Enumeration: 'routerLink': 1, 'interRouter': 4, 'intraPrefix': 9, 'interNetwork': 3, 'multicastGroup': 6, 'asExternal': 5, 'illegalLSA': 0, 'networkLink': 2, 'link': 8, 'nssaExternal': 7, 'unknownLink': 10, 'unknownArea': 11.
                     agentOspfv3AsLsdbLsid 1.3.6.1.4.1.7244.2.30.3.18.1.2 ipaddress read-only
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
                     agentOspfv3AsLsdbRouterId 1.3.6.1.4.1.7244.2.30.3.18.1.3 routerid read-only
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
                     agentOspfv3AsLsdbSequence 1.3.6.1.4.1.7244.2.30.3.18.1.4 unsigned32 read-only
The sequence number field is a signed 32-bit integer. It starts with the value '80000001'h, or -'7FFFFFFF'h, and increments until '7FFFFFFF'h. Thus, a typical sequence number will be very negative. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
                     agentOspfv3AsLsdbAge 1.3.6.1.4.1.7244.2.30.3.18.1.5 integer32 read-only
This field is the age of the link state adver- tisement in seconds.
                     agentOspfv3AsLsdbChecksum 1.3.6.1.4.1.7244.2.30.3.18.1.6 integer32 read-only
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum.
                     agentOspfv3AsLsdbAdvertisement 1.3.6.1.4.1.7244.2.30.3.18.1.7 octet string read-only
The entire Link State Advertisement, including its header.
           agentOspfv3DefaultPassiveMode 1.3.6.1.4.1.7244.2.30.3.19 truthvalue read-write
Flag to determine, whether all the interfaces are passive interfaces by default. A passive interface will not participate in the OSPFv3 adjacency formation.